linux/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v5.h
Dmitry Baryshkov b7a2f88257 phy: qcom-qmp: move PCS V5 registers to separate headers
Move PCS V5 registers to the separate headers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220705094320.1313312-17-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07 10:36:00 +05:30

37 lines
1.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2017, The Linux Foundation. All rights reserved.
*/
#ifndef QCOM_PHY_QMP_PCS_USB_V5_H_
#define QCOM_PHY_QMP_PCS_USB_V5_H_
/* Only for QMP V5 PHY - USB3 have different offsets than V4 */
#define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1 0x000
#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS 0x004
#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x008
#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL2 0x00c
#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x010
#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x014
#define QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x018
#define QPHY_V5_PCS_USB3_LFPS_TX_ECSTART 0x01c
#define QPHY_V5_PCS_USB3_LFPS_PER_TIMER_VAL 0x020
#define QPHY_V5_PCS_USB3_LFPS_TX_END_CNT_U3_START 0x024
#define QPHY_V5_PCS_USB3_LFPS_CONFIG1 0x028
#define QPHY_V5_PCS_USB3_RXEQTRAINING_LOCK_TIME 0x02c
#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME 0x030
#define QPHY_V5_PCS_USB3_RXEQTRAINING_CTLE_TIME 0x034
#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2 0x038
#define QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x03c
#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x040
#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x044
#define QPHY_V5_PCS_USB3_ARCVR_DTCT_EN_PERIOD 0x048
#define QPHY_V5_PCS_USB3_ARCVR_DTCT_CM_DLY 0x04c
#define QPHY_V5_PCS_USB3_TXONESZEROS_RUN_LENGTH 0x050
#define QPHY_V5_PCS_USB3_ALFPS_DEGLITCH_VAL 0x054
#define QPHY_V5_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x058
#define QPHY_V5_PCS_USB3_TEST_CONTROL 0x05c
#define QPHY_V5_PCS_USB3_RXTERMINATION_DLY_SEL 0x060
#endif