linux/drivers/gpio/gpio-mmio.c
Schspa Shi 3c938cc5ce gpio: use raw spinlock for gpio chip shadowed data
In case of PREEMPT_RT, there is a raw_spinlock -> spinlock dependency
as the lockdep report shows.

__irq_set_handler
  irq_get_desc_buslock
    __irq_get_desc_lock
      raw_spin_lock_irqsave(&desc->lock, *flags);  // raw spinlock get here
  __irq_do_set_handler
    mask_ack_irq
      dwapb_irq_ack
        spin_lock_irqsave(&gc->bgpio_lock, flags); // sleep able spinlock
  irq_put_desc_busunlock

Replace with a raw lock to avoid BUGs. This lock is only used to access
registers, and It's safe to replace with the raw lock without bad
influence.

[   15.090359][    T1] =============================
[   15.090365][    T1] [ BUG: Invalid wait context ]
[   15.090373][    T1] 5.10.59-rt52-00983-g186a6841c682-dirty #3 Not tainted
[   15.090386][    T1] -----------------------------
[   15.090392][    T1] swapper/0/1 is trying to lock:
[   15.090402][    T1] 70ff00018507c188 (&gc->bgpio_lock){....}-{3:3}, at: _raw_spin_lock_irqsave+0x1c/0x28
[   15.090470][    T1] other info that might help us debug this:
[   15.090477][    T1] context-{5:5}
[   15.090485][    T1] 3 locks held by swapper/0/1:
[   15.090497][    T1]  #0: c2ff0001816de1a0 (&dev->mutex){....}-{4:4}, at: __device_driver_lock+0x98/0x104
[   15.090553][    T1]  #1: ffff90001485b4b8 (irq_domain_mutex){+.+.}-{4:4}, at: irq_domain_associate+0xbc/0x6d4
[   15.090606][    T1]  #2: 4bff000185d7a8e0 (lock_class){....}-{2:2}, at: _raw_spin_lock_irqsave+0x1c/0x28
[   15.090654][    T1] stack backtrace:
[   15.090661][    T1] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.59-rt52-00983-g186a6841c682-dirty #3
[   15.090682][    T1] Hardware name: Horizon Robotics Journey 5 DVB (DT)
[   15.090692][    T1] Call trace:
......
[   15.090811][    T1]  _raw_spin_lock_irqsave+0x1c/0x28
[   15.090828][    T1]  dwapb_irq_ack+0xb4/0x300
[   15.090846][    T1]  __irq_do_set_handler+0x494/0xb2c
[   15.090864][    T1]  __irq_set_handler+0x74/0x114
[   15.090881][    T1]  irq_set_chip_and_handler_name+0x44/0x58
[   15.090900][    T1]  gpiochip_irq_map+0x210/0x644

Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Doug Berger <opendmb@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-04-25 12:10:02 +02:00

823 lines
21 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Generic driver for memory-mapped GPIO controllers.
*
* Copyright 2008 MontaVista Software, Inc.
* Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
*
* ....``.```~~~~````.`.`.`.`.```````'',,,.........`````......`.......
* ...`` ```````..
* ..The simplest form of a GPIO controller that the driver supports is``
* `.just a single "data" register, where GPIO state can be read and/or `
* `,..written. ,,..``~~~~ .....``.`.`.~~.```.`.........``````.```````
* `````````
___
_/~~|___/~| . ```~~~~~~ ___/___\___ ,~.`.`.`.`````.~~...,,,,...
__________|~$@~~~ %~ /o*o*o*o*o*o\ .. Implementing such a GPIO .
o ` ~~~~\___/~~~~ ` controller in FPGA is ,.`
`....trivial..'~`.```.```
* ```````
* .```````~~~~`..`.``.``.
* . The driver supports `... ,..```.`~~~```````````````....````.``,,
* . big-endian notation, just`. .. A bit more sophisticated controllers ,
* . register the device with -be`. .with a pair of set/clear-bit registers ,
* `.. suffix. ```~~`````....`.` . affecting the data register and the .`
* ``.`.``...``` ```.. output pins are also supported.`
* ^^ `````.`````````.,``~``~``~~``````
* . ^^
* ,..`.`.`...````````````......`.`.`.`.`.`..`.`.`..
* .. The expectation is that in at least some cases . ,-~~~-,
* .this will be used with roll-your-own ASIC/FPGA .` \ /
* .logic in Verilog or VHDL. ~~~`````````..`````~~` \ /
* ..````````......``````````` \o_
* |
* ^^ / \
*
* ...`````~~`.....``.`..........``````.`.``.```........``.
* ` 8, 16, 32 and 64 bits registers are supported, and``.
* . the number of GPIOs is determined by the width of ~
* .. the registers. ,............```.`.`..`.`.~~~.`.`.`~
* `.......````.```
*/
#include <linux/init.h>
#include <linux/err.h>
#include <linux/bug.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/log2.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/gpio/driver.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <linux/mod_devicetable.h>
#include <linux/of.h>
#include <linux/of_device.h>
static void bgpio_write8(void __iomem *reg, unsigned long data)
{
writeb(data, reg);
}
static unsigned long bgpio_read8(void __iomem *reg)
{
return readb(reg);
}
static void bgpio_write16(void __iomem *reg, unsigned long data)
{
writew(data, reg);
}
static unsigned long bgpio_read16(void __iomem *reg)
{
return readw(reg);
}
static void bgpio_write32(void __iomem *reg, unsigned long data)
{
writel(data, reg);
}
static unsigned long bgpio_read32(void __iomem *reg)
{
return readl(reg);
}
#if BITS_PER_LONG >= 64
static void bgpio_write64(void __iomem *reg, unsigned long data)
{
writeq(data, reg);
}
static unsigned long bgpio_read64(void __iomem *reg)
{
return readq(reg);
}
#endif /* BITS_PER_LONG >= 64 */
static void bgpio_write16be(void __iomem *reg, unsigned long data)
{
iowrite16be(data, reg);
}
static unsigned long bgpio_read16be(void __iomem *reg)
{
return ioread16be(reg);
}
static void bgpio_write32be(void __iomem *reg, unsigned long data)
{
iowrite32be(data, reg);
}
static unsigned long bgpio_read32be(void __iomem *reg)
{
return ioread32be(reg);
}
static unsigned long bgpio_line2mask(struct gpio_chip *gc, unsigned int line)
{
if (gc->be_bits)
return BIT(gc->bgpio_bits - 1 - line);
return BIT(line);
}
static int bgpio_get_set(struct gpio_chip *gc, unsigned int gpio)
{
unsigned long pinmask = bgpio_line2mask(gc, gpio);
bool dir = !!(gc->bgpio_dir & pinmask);
if (dir)
return !!(gc->read_reg(gc->reg_set) & pinmask);
else
return !!(gc->read_reg(gc->reg_dat) & pinmask);
}
/*
* This assumes that the bits in the GPIO register are in native endianness.
* We only assign the function pointer if we have that.
*/
static int bgpio_get_set_multiple(struct gpio_chip *gc, unsigned long *mask,
unsigned long *bits)
{
unsigned long get_mask = 0;
unsigned long set_mask = 0;
/* Make sure we first clear any bits that are zero when we read the register */
*bits &= ~*mask;
set_mask = *mask & gc->bgpio_dir;
get_mask = *mask & ~gc->bgpio_dir;
if (set_mask)
*bits |= gc->read_reg(gc->reg_set) & set_mask;
if (get_mask)
*bits |= gc->read_reg(gc->reg_dat) & get_mask;
return 0;
}
static int bgpio_get(struct gpio_chip *gc, unsigned int gpio)
{
return !!(gc->read_reg(gc->reg_dat) & bgpio_line2mask(gc, gpio));
}
/*
* This only works if the bits in the GPIO register are in native endianness.
*/
static int bgpio_get_multiple(struct gpio_chip *gc, unsigned long *mask,
unsigned long *bits)
{
/* Make sure we first clear any bits that are zero when we read the register */
*bits &= ~*mask;
*bits |= gc->read_reg(gc->reg_dat) & *mask;
return 0;
}
/*
* With big endian mirrored bit order it becomes more tedious.
*/
static int bgpio_get_multiple_be(struct gpio_chip *gc, unsigned long *mask,
unsigned long *bits)
{
unsigned long readmask = 0;
unsigned long val;
int bit;
/* Make sure we first clear any bits that are zero when we read the register */
*bits &= ~*mask;
/* Create a mirrored mask */
for_each_set_bit(bit, mask, gc->ngpio)
readmask |= bgpio_line2mask(gc, bit);
/* Read the register */
val = gc->read_reg(gc->reg_dat) & readmask;
/*
* Mirror the result into the "bits" result, this will give line 0
* in bit 0 ... line 31 in bit 31 for a 32bit register.
*/
for_each_set_bit(bit, &val, gc->ngpio)
*bits |= bgpio_line2mask(gc, bit);
return 0;
}
static void bgpio_set_none(struct gpio_chip *gc, unsigned int gpio, int val)
{
}
static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
{
unsigned long mask = bgpio_line2mask(gc, gpio);
unsigned long flags;
raw_spin_lock_irqsave(&gc->bgpio_lock, flags);
if (val)
gc->bgpio_data |= mask;
else
gc->bgpio_data &= ~mask;
gc->write_reg(gc->reg_dat, gc->bgpio_data);
raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags);
}
static void bgpio_set_with_clear(struct gpio_chip *gc, unsigned int gpio,
int val)
{
unsigned long mask = bgpio_line2mask(gc, gpio);
if (val)
gc->write_reg(gc->reg_set, mask);
else
gc->write_reg(gc->reg_clr, mask);
}
static void bgpio_set_set(struct gpio_chip *gc, unsigned int gpio, int val)
{
unsigned long mask = bgpio_line2mask(gc, gpio);
unsigned long flags;
raw_spin_lock_irqsave(&gc->bgpio_lock, flags);
if (val)
gc->bgpio_data |= mask;
else
gc->bgpio_data &= ~mask;
gc->write_reg(gc->reg_set, gc->bgpio_data);
raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags);
}
static void bgpio_multiple_get_masks(struct gpio_chip *gc,
unsigned long *mask, unsigned long *bits,
unsigned long *set_mask,
unsigned long *clear_mask)
{
int i;
*set_mask = 0;
*clear_mask = 0;
for_each_set_bit(i, mask, gc->bgpio_bits) {
if (test_bit(i, bits))
*set_mask |= bgpio_line2mask(gc, i);
else
*clear_mask |= bgpio_line2mask(gc, i);
}
}
static void bgpio_set_multiple_single_reg(struct gpio_chip *gc,
unsigned long *mask,
unsigned long *bits,
void __iomem *reg)
{
unsigned long flags;
unsigned long set_mask, clear_mask;
raw_spin_lock_irqsave(&gc->bgpio_lock, flags);
bgpio_multiple_get_masks(gc, mask, bits, &set_mask, &clear_mask);
gc->bgpio_data |= set_mask;
gc->bgpio_data &= ~clear_mask;
gc->write_reg(reg, gc->bgpio_data);
raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags);
}
static void bgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
unsigned long *bits)
{
bgpio_set_multiple_single_reg(gc, mask, bits, gc->reg_dat);
}
static void bgpio_set_multiple_set(struct gpio_chip *gc, unsigned long *mask,
unsigned long *bits)
{
bgpio_set_multiple_single_reg(gc, mask, bits, gc->reg_set);
}
static void bgpio_set_multiple_with_clear(struct gpio_chip *gc,
unsigned long *mask,
unsigned long *bits)
{
unsigned long set_mask, clear_mask;
bgpio_multiple_get_masks(gc, mask, bits, &set_mask, &clear_mask);
if (set_mask)
gc->write_reg(gc->reg_set, set_mask);
if (clear_mask)
gc->write_reg(gc->reg_clr, clear_mask);
}
static int bgpio_simple_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
return 0;
}
static int bgpio_dir_out_err(struct gpio_chip *gc, unsigned int gpio,
int val)
{
return -EINVAL;
}
static int bgpio_simple_dir_out(struct gpio_chip *gc, unsigned int gpio,
int val)
{
gc->set(gc, gpio, val);
return 0;
}
static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
unsigned long flags;
raw_spin_lock_irqsave(&gc->bgpio_lock, flags);
gc->bgpio_dir &= ~bgpio_line2mask(gc, gpio);
if (gc->reg_dir_in)
gc->write_reg(gc->reg_dir_in, ~gc->bgpio_dir);
if (gc->reg_dir_out)
gc->write_reg(gc->reg_dir_out, gc->bgpio_dir);
raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags);
return 0;
}
static int bgpio_get_dir(struct gpio_chip *gc, unsigned int gpio)
{
/* Return 0 if output, 1 if input */
if (gc->bgpio_dir_unreadable) {
if (gc->bgpio_dir & bgpio_line2mask(gc, gpio))
return GPIO_LINE_DIRECTION_OUT;
return GPIO_LINE_DIRECTION_IN;
}
if (gc->reg_dir_out) {
if (gc->read_reg(gc->reg_dir_out) & bgpio_line2mask(gc, gpio))
return GPIO_LINE_DIRECTION_OUT;
return GPIO_LINE_DIRECTION_IN;
}
if (gc->reg_dir_in)
if (!(gc->read_reg(gc->reg_dir_in) & bgpio_line2mask(gc, gpio)))
return GPIO_LINE_DIRECTION_OUT;
return GPIO_LINE_DIRECTION_IN;
}
static void bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
unsigned long flags;
raw_spin_lock_irqsave(&gc->bgpio_lock, flags);
gc->bgpio_dir |= bgpio_line2mask(gc, gpio);
if (gc->reg_dir_in)
gc->write_reg(gc->reg_dir_in, ~gc->bgpio_dir);
if (gc->reg_dir_out)
gc->write_reg(gc->reg_dir_out, gc->bgpio_dir);
raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags);
}
static int bgpio_dir_out_dir_first(struct gpio_chip *gc, unsigned int gpio,
int val)
{
bgpio_dir_out(gc, gpio, val);
gc->set(gc, gpio, val);
return 0;
}
static int bgpio_dir_out_val_first(struct gpio_chip *gc, unsigned int gpio,
int val)
{
gc->set(gc, gpio, val);
bgpio_dir_out(gc, gpio, val);
return 0;
}
static int bgpio_setup_accessors(struct device *dev,
struct gpio_chip *gc,
bool byte_be)
{
switch (gc->bgpio_bits) {
case 8:
gc->read_reg = bgpio_read8;
gc->write_reg = bgpio_write8;
break;
case 16:
if (byte_be) {
gc->read_reg = bgpio_read16be;
gc->write_reg = bgpio_write16be;
} else {
gc->read_reg = bgpio_read16;
gc->write_reg = bgpio_write16;
}
break;
case 32:
if (byte_be) {
gc->read_reg = bgpio_read32be;
gc->write_reg = bgpio_write32be;
} else {
gc->read_reg = bgpio_read32;
gc->write_reg = bgpio_write32;
}
break;
#if BITS_PER_LONG >= 64
case 64:
if (byte_be) {
dev_err(dev,
"64 bit big endian byte order unsupported\n");
return -EINVAL;
} else {
gc->read_reg = bgpio_read64;
gc->write_reg = bgpio_write64;
}
break;
#endif /* BITS_PER_LONG >= 64 */
default:
dev_err(dev, "unsupported data width %u bits\n", gc->bgpio_bits);
return -EINVAL;
}
return 0;
}
/*
* Create the device and allocate the resources. For setting GPIO's there are
* three supported configurations:
*
* - single input/output register resource (named "dat").
* - set/clear pair (named "set" and "clr").
* - single output register resource and single input resource ("set" and
* dat").
*
* For the single output register, this drives a 1 by setting a bit and a zero
* by clearing a bit. For the set clr pair, this drives a 1 by setting a bit
* in the set register and clears it by setting a bit in the clear register.
* The configuration is detected by which resources are present.
*
* For setting the GPIO direction, there are three supported configurations:
*
* - simple bidirection GPIO that requires no configuration.
* - an output direction register (named "dirout") where a 1 bit
* indicates the GPIO is an output.
* - an input direction register (named "dirin") where a 1 bit indicates
* the GPIO is an input.
*/
static int bgpio_setup_io(struct gpio_chip *gc,
void __iomem *dat,
void __iomem *set,
void __iomem *clr,
unsigned long flags)
{
gc->reg_dat = dat;
if (!gc->reg_dat)
return -EINVAL;
if (set && clr) {
gc->reg_set = set;
gc->reg_clr = clr;
gc->set = bgpio_set_with_clear;
gc->set_multiple = bgpio_set_multiple_with_clear;
} else if (set && !clr) {
gc->reg_set = set;
gc->set = bgpio_set_set;
gc->set_multiple = bgpio_set_multiple_set;
} else if (flags & BGPIOF_NO_OUTPUT) {
gc->set = bgpio_set_none;
gc->set_multiple = NULL;
} else {
gc->set = bgpio_set;
gc->set_multiple = bgpio_set_multiple;
}
if (!(flags & BGPIOF_UNREADABLE_REG_SET) &&
(flags & BGPIOF_READ_OUTPUT_REG_SET)) {
gc->get = bgpio_get_set;
if (!gc->be_bits)
gc->get_multiple = bgpio_get_set_multiple;
/*
* We deliberately avoid assigning the ->get_multiple() call
* for big endian mirrored registers which are ALSO reflecting
* their value in the set register when used as output. It is
* simply too much complexity, let the GPIO core fall back to
* reading each line individually in that fringe case.
*/
} else {
gc->get = bgpio_get;
if (gc->be_bits)
gc->get_multiple = bgpio_get_multiple_be;
else
gc->get_multiple = bgpio_get_multiple;
}
return 0;
}
static int bgpio_setup_direction(struct gpio_chip *gc,
void __iomem *dirout,
void __iomem *dirin,
unsigned long flags)
{
if (dirout || dirin) {
gc->reg_dir_out = dirout;
gc->reg_dir_in = dirin;
if (flags & BGPIOF_NO_SET_ON_INPUT)
gc->direction_output = bgpio_dir_out_dir_first;
else
gc->direction_output = bgpio_dir_out_val_first;
gc->direction_input = bgpio_dir_in;
gc->get_direction = bgpio_get_dir;
} else {
if (flags & BGPIOF_NO_OUTPUT)
gc->direction_output = bgpio_dir_out_err;
else
gc->direction_output = bgpio_simple_dir_out;
gc->direction_input = bgpio_simple_dir_in;
}
return 0;
}
static int bgpio_request(struct gpio_chip *chip, unsigned gpio_pin)
{
if (gpio_pin < chip->ngpio)
return 0;
return -EINVAL;
}
/**
* bgpio_init() - Initialize generic GPIO accessor functions
* @gc: the GPIO chip to set up
* @dev: the parent device of the new GPIO chip (compulsory)
* @sz: the size (width) of the MMIO registers in bytes, typically 1, 2 or 4
* @dat: MMIO address for the register to READ the value of the GPIO lines, it
* is expected that a 1 in the corresponding bit in this register means the
* line is asserted
* @set: MMIO address for the register to SET the value of the GPIO lines, it is
* expected that we write the line with 1 in this register to drive the GPIO line
* high.
* @clr: MMIO address for the register to CLEAR the value of the GPIO lines, it is
* expected that we write the line with 1 in this register to drive the GPIO line
* low. It is allowed to leave this address as NULL, in that case the SET register
* will be assumed to also clear the GPIO lines, by actively writing the line
* with 0.
* @dirout: MMIO address for the register to set the line as OUTPUT. It is assumed
* that setting a line to 1 in this register will turn that line into an
* output line. Conversely, setting the line to 0 will turn that line into
* an input.
* @dirin: MMIO address for the register to set this line as INPUT. It is assumed
* that setting a line to 1 in this register will turn that line into an
* input line. Conversely, setting the line to 0 will turn that line into
* an output.
* @flags: Different flags that will affect the behaviour of the device, such as
* endianness etc.
*/
int bgpio_init(struct gpio_chip *gc, struct device *dev,
unsigned long sz, void __iomem *dat, void __iomem *set,
void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
unsigned long flags)
{
int ret;
if (!is_power_of_2(sz))
return -EINVAL;
gc->bgpio_bits = sz * 8;
if (gc->bgpio_bits > BITS_PER_LONG)
return -EINVAL;
raw_spin_lock_init(&gc->bgpio_lock);
gc->parent = dev;
gc->label = dev_name(dev);
gc->base = -1;
gc->ngpio = gc->bgpio_bits;
gc->request = bgpio_request;
gc->be_bits = !!(flags & BGPIOF_BIG_ENDIAN);
ret = bgpio_setup_io(gc, dat, set, clr, flags);
if (ret)
return ret;
ret = bgpio_setup_accessors(dev, gc, flags & BGPIOF_BIG_ENDIAN_BYTE_ORDER);
if (ret)
return ret;
ret = bgpio_setup_direction(gc, dirout, dirin, flags);
if (ret)
return ret;
gc->bgpio_data = gc->read_reg(gc->reg_dat);
if (gc->set == bgpio_set_set &&
!(flags & BGPIOF_UNREADABLE_REG_SET))
gc->bgpio_data = gc->read_reg(gc->reg_set);
if (flags & BGPIOF_UNREADABLE_REG_DIR)
gc->bgpio_dir_unreadable = true;
/*
* Inspect hardware to find initial direction setting.
*/
if ((gc->reg_dir_out || gc->reg_dir_in) &&
!(flags & BGPIOF_UNREADABLE_REG_DIR)) {
if (gc->reg_dir_out)
gc->bgpio_dir = gc->read_reg(gc->reg_dir_out);
else if (gc->reg_dir_in)
gc->bgpio_dir = ~gc->read_reg(gc->reg_dir_in);
/*
* If we have two direction registers, synchronise
* input setting to output setting, the library
* can not handle a line being input and output at
* the same time.
*/
if (gc->reg_dir_out && gc->reg_dir_in)
gc->write_reg(gc->reg_dir_in, ~gc->bgpio_dir);
}
return ret;
}
EXPORT_SYMBOL_GPL(bgpio_init);
#if IS_ENABLED(CONFIG_GPIO_GENERIC_PLATFORM)
static void __iomem *bgpio_map(struct platform_device *pdev,
const char *name,
resource_size_t sane_sz)
{
struct resource *r;
resource_size_t sz;
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
if (!r)
return NULL;
sz = resource_size(r);
if (sz != sane_sz)
return IOMEM_ERR_PTR(-EINVAL);
return devm_ioremap_resource(&pdev->dev, r);
}
#ifdef CONFIG_OF
static const struct of_device_id bgpio_of_match[] = {
{ .compatible = "brcm,bcm6345-gpio" },
{ .compatible = "wd,mbl-gpio" },
{ .compatible = "ni,169445-nand-gpio" },
{ }
};
MODULE_DEVICE_TABLE(of, bgpio_of_match);
static struct bgpio_pdata *bgpio_parse_dt(struct platform_device *pdev,
unsigned long *flags)
{
struct bgpio_pdata *pdata;
if (!of_match_device(bgpio_of_match, &pdev->dev))
return NULL;
pdata = devm_kzalloc(&pdev->dev, sizeof(struct bgpio_pdata),
GFP_KERNEL);
if (!pdata)
return ERR_PTR(-ENOMEM);
pdata->base = -1;
if (of_device_is_big_endian(pdev->dev.of_node))
*flags |= BGPIOF_BIG_ENDIAN_BYTE_ORDER;
if (of_property_read_bool(pdev->dev.of_node, "no-output"))
*flags |= BGPIOF_NO_OUTPUT;
return pdata;
}
#else
static struct bgpio_pdata *bgpio_parse_dt(struct platform_device *pdev,
unsigned long *flags)
{
return NULL;
}
#endif /* CONFIG_OF */
static int bgpio_pdev_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *r;
void __iomem *dat;
void __iomem *set;
void __iomem *clr;
void __iomem *dirout;
void __iomem *dirin;
unsigned long sz;
unsigned long flags = 0;
int err;
struct gpio_chip *gc;
struct bgpio_pdata *pdata;
pdata = bgpio_parse_dt(pdev, &flags);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
if (!pdata) {
pdata = dev_get_platdata(dev);
flags = pdev->id_entry->driver_data;
}
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
if (!r)
return -EINVAL;
sz = resource_size(r);
dat = bgpio_map(pdev, "dat", sz);
if (IS_ERR(dat))
return PTR_ERR(dat);
set = bgpio_map(pdev, "set", sz);
if (IS_ERR(set))
return PTR_ERR(set);
clr = bgpio_map(pdev, "clr", sz);
if (IS_ERR(clr))
return PTR_ERR(clr);
dirout = bgpio_map(pdev, "dirout", sz);
if (IS_ERR(dirout))
return PTR_ERR(dirout);
dirin = bgpio_map(pdev, "dirin", sz);
if (IS_ERR(dirin))
return PTR_ERR(dirin);
gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
if (!gc)
return -ENOMEM;
err = bgpio_init(gc, dev, sz, dat, set, clr, dirout, dirin, flags);
if (err)
return err;
if (pdata) {
if (pdata->label)
gc->label = pdata->label;
gc->base = pdata->base;
if (pdata->ngpio > 0)
gc->ngpio = pdata->ngpio;
}
platform_set_drvdata(pdev, gc);
return devm_gpiochip_add_data(&pdev->dev, gc, NULL);
}
static const struct platform_device_id bgpio_id_table[] = {
{
.name = "basic-mmio-gpio",
.driver_data = 0,
}, {
.name = "basic-mmio-gpio-be",
.driver_data = BGPIOF_BIG_ENDIAN,
},
{ }
};
MODULE_DEVICE_TABLE(platform, bgpio_id_table);
static struct platform_driver bgpio_driver = {
.driver = {
.name = "basic-mmio-gpio",
.of_match_table = of_match_ptr(bgpio_of_match),
},
.id_table = bgpio_id_table,
.probe = bgpio_pdev_probe,
};
module_platform_driver(bgpio_driver);
#endif /* CONFIG_GPIO_GENERIC_PLATFORM */
MODULE_DESCRIPTION("Driver for basic memory-mapped GPIO controllers");
MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
MODULE_LICENSE("GPL");