mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 23:14:31 +08:00
6fcdbc0c3a
Add support for Virge/MX (86C260) chip. Although this is a laptop chip, there's an AGP card with this chip too. Tested with AGP card, will probably not work correctly with laptops. DDC does not work on this card (even in DOS or Windows). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
1604 lines
46 KiB
C
1604 lines
46 KiB
C
/*
|
|
* linux/drivers/video/s3fb.c -- Frame buffer device driver for S3 Trio/Virge
|
|
*
|
|
* Copyright (c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive for
|
|
* more details.
|
|
*
|
|
* Code is based on David Boucher's viafb (http://davesdomain.org.uk/viafb/)
|
|
* which is based on the code of neofb.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/svga.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/console.h> /* Why should fb driver call console functions? because console_lock() */
|
|
#include <video/vga.h>
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
|
|
#ifdef CONFIG_MTRR
|
|
#include <asm/mtrr.h>
|
|
#endif
|
|
|
|
struct s3fb_info {
|
|
int chip, rev, mclk_freq;
|
|
int mtrr_reg;
|
|
struct vgastate state;
|
|
struct mutex open_lock;
|
|
unsigned int ref_count;
|
|
u32 pseudo_palette[16];
|
|
#ifdef CONFIG_FB_S3_DDC
|
|
u8 __iomem *mmio;
|
|
bool ddc_registered;
|
|
struct i2c_adapter ddc_adapter;
|
|
struct i2c_algo_bit_data ddc_algo;
|
|
#endif
|
|
};
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static const struct svga_fb_format s3fb_formats[] = {
|
|
{ 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
|
|
FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4, FB_VISUAL_PSEUDOCOLOR, 8, 16},
|
|
{ 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 0,
|
|
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 16},
|
|
{ 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 1,
|
|
FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 8, 16},
|
|
{ 8, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
|
|
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 4, 8},
|
|
{16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0,
|
|
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4},
|
|
{16, {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0}, 0,
|
|
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4},
|
|
{24, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
|
|
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2},
|
|
{32, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
|
|
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2},
|
|
SVGA_FORMAT_END
|
|
};
|
|
|
|
|
|
static const struct svga_pll s3_pll = {3, 129, 3, 33, 0, 3,
|
|
35000, 240000, 14318};
|
|
static const struct svga_pll s3_trio3d_pll = {3, 129, 3, 31, 0, 4,
|
|
230000, 460000, 14318};
|
|
|
|
static const int s3_memsizes[] = {4096, 0, 3072, 8192, 2048, 6144, 1024, 512};
|
|
|
|
static const char * const s3_names[] = {"S3 Unknown", "S3 Trio32", "S3 Trio64", "S3 Trio64V+",
|
|
"S3 Trio64UV+", "S3 Trio64V2/DX", "S3 Trio64V2/GX",
|
|
"S3 Plato/PX", "S3 Aurora64V+", "S3 Virge",
|
|
"S3 Virge/VX", "S3 Virge/DX", "S3 Virge/GX",
|
|
"S3 Virge/GX2", "S3 Virge/GX2+", "",
|
|
"S3 Trio3D/1X", "S3 Trio3D/2X", "S3 Trio3D/2X",
|
|
"S3 Trio3D", "S3 Virge/MX"};
|
|
|
|
#define CHIP_UNKNOWN 0x00
|
|
#define CHIP_732_TRIO32 0x01
|
|
#define CHIP_764_TRIO64 0x02
|
|
#define CHIP_765_TRIO64VP 0x03
|
|
#define CHIP_767_TRIO64UVP 0x04
|
|
#define CHIP_775_TRIO64V2_DX 0x05
|
|
#define CHIP_785_TRIO64V2_GX 0x06
|
|
#define CHIP_551_PLATO_PX 0x07
|
|
#define CHIP_M65_AURORA64VP 0x08
|
|
#define CHIP_325_VIRGE 0x09
|
|
#define CHIP_988_VIRGE_VX 0x0A
|
|
#define CHIP_375_VIRGE_DX 0x0B
|
|
#define CHIP_385_VIRGE_GX 0x0C
|
|
#define CHIP_357_VIRGE_GX2 0x0D
|
|
#define CHIP_359_VIRGE_GX2P 0x0E
|
|
#define CHIP_360_TRIO3D_1X 0x10
|
|
#define CHIP_362_TRIO3D_2X 0x11
|
|
#define CHIP_368_TRIO3D_2X 0x12
|
|
#define CHIP_365_TRIO3D 0x13
|
|
#define CHIP_260_VIRGE_MX 0x14
|
|
|
|
#define CHIP_XXX_TRIO 0x80
|
|
#define CHIP_XXX_TRIO64V2_DXGX 0x81
|
|
#define CHIP_XXX_VIRGE_DXGX 0x82
|
|
#define CHIP_36X_TRIO3D_1X_2X 0x83
|
|
|
|
#define CHIP_UNDECIDED_FLAG 0x80
|
|
#define CHIP_MASK 0xFF
|
|
|
|
#define MMIO_OFFSET 0x1000000
|
|
#define MMIO_SIZE 0x10000
|
|
|
|
/* CRT timing register sets */
|
|
|
|
static const struct vga_regset s3_h_total_regs[] = {{0x00, 0, 7}, {0x5D, 0, 0}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_h_display_regs[] = {{0x01, 0, 7}, {0x5D, 1, 1}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_h_blank_start_regs[] = {{0x02, 0, 7}, {0x5D, 2, 2}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_h_blank_end_regs[] = {{0x03, 0, 4}, {0x05, 7, 7}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_h_sync_start_regs[] = {{0x04, 0, 7}, {0x5D, 4, 4}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_h_sync_end_regs[] = {{0x05, 0, 4}, VGA_REGSET_END};
|
|
|
|
static const struct vga_regset s3_v_total_regs[] = {{0x06, 0, 7}, {0x07, 0, 0}, {0x07, 5, 5}, {0x5E, 0, 0}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_v_display_regs[] = {{0x12, 0, 7}, {0x07, 1, 1}, {0x07, 6, 6}, {0x5E, 1, 1}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_v_blank_start_regs[] = {{0x15, 0, 7}, {0x07, 3, 3}, {0x09, 5, 5}, {0x5E, 2, 2}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_v_blank_end_regs[] = {{0x16, 0, 7}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_v_sync_start_regs[] = {{0x10, 0, 7}, {0x07, 2, 2}, {0x07, 7, 7}, {0x5E, 4, 4}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_v_sync_end_regs[] = {{0x11, 0, 3}, VGA_REGSET_END};
|
|
|
|
static const struct vga_regset s3_line_compare_regs[] = {{0x18, 0, 7}, {0x07, 4, 4}, {0x09, 6, 6}, {0x5E, 6, 6}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_start_address_regs[] = {{0x0d, 0, 7}, {0x0c, 0, 7}, {0x69, 0, 4}, VGA_REGSET_END};
|
|
static const struct vga_regset s3_offset_regs[] = {{0x13, 0, 7}, {0x51, 4, 5}, VGA_REGSET_END}; /* set 0x43 bit 2 to 0 */
|
|
|
|
static const struct vga_regset s3_dtpc_regs[] = {{0x3B, 0, 7}, {0x5D, 6, 6}, VGA_REGSET_END};
|
|
|
|
static const struct svga_timing_regs s3_timing_regs = {
|
|
s3_h_total_regs, s3_h_display_regs, s3_h_blank_start_regs,
|
|
s3_h_blank_end_regs, s3_h_sync_start_regs, s3_h_sync_end_regs,
|
|
s3_v_total_regs, s3_v_display_regs, s3_v_blank_start_regs,
|
|
s3_v_blank_end_regs, s3_v_sync_start_regs, s3_v_sync_end_regs,
|
|
};
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* Module parameters */
|
|
|
|
|
|
static char *mode_option __devinitdata;
|
|
|
|
#ifdef CONFIG_MTRR
|
|
static int mtrr __devinitdata = 1;
|
|
#endif
|
|
|
|
static int fasttext = 1;
|
|
|
|
|
|
MODULE_AUTHOR("(c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("fbdev driver for S3 Trio/Virge");
|
|
|
|
module_param(mode_option, charp, 0444);
|
|
MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
|
|
module_param_named(mode, mode_option, charp, 0444);
|
|
MODULE_PARM_DESC(mode, "Default video mode ('640x480-8@60', etc) (deprecated)");
|
|
|
|
#ifdef CONFIG_MTRR
|
|
module_param(mtrr, int, 0444);
|
|
MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
|
|
#endif
|
|
|
|
module_param(fasttext, int, 0644);
|
|
MODULE_PARM_DESC(fasttext, "Enable S3 fast text mode (1=enable, 0=disable, default=1)");
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_FB_S3_DDC
|
|
|
|
#define DDC_REG 0xaa /* Trio 3D/1X/2X */
|
|
#define DDC_MMIO_REG 0xff20 /* all other chips */
|
|
#define DDC_SCL_OUT (1 << 0)
|
|
#define DDC_SDA_OUT (1 << 1)
|
|
#define DDC_SCL_IN (1 << 2)
|
|
#define DDC_SDA_IN (1 << 3)
|
|
#define DDC_DRIVE_EN (1 << 4)
|
|
|
|
static bool s3fb_ddc_needs_mmio(int chip)
|
|
{
|
|
return !(chip == CHIP_360_TRIO3D_1X ||
|
|
chip == CHIP_362_TRIO3D_2X ||
|
|
chip == CHIP_368_TRIO3D_2X);
|
|
}
|
|
|
|
static u8 s3fb_ddc_read(struct s3fb_info *par)
|
|
{
|
|
if (s3fb_ddc_needs_mmio(par->chip))
|
|
return readb(par->mmio + DDC_MMIO_REG);
|
|
else
|
|
return vga_rcrt(par->state.vgabase, DDC_REG);
|
|
}
|
|
|
|
static void s3fb_ddc_write(struct s3fb_info *par, u8 val)
|
|
{
|
|
if (s3fb_ddc_needs_mmio(par->chip))
|
|
writeb(val, par->mmio + DDC_MMIO_REG);
|
|
else
|
|
vga_wcrt(par->state.vgabase, DDC_REG, val);
|
|
}
|
|
|
|
static void s3fb_ddc_setscl(void *data, int val)
|
|
{
|
|
struct s3fb_info *par = data;
|
|
unsigned char reg;
|
|
|
|
reg = s3fb_ddc_read(par) | DDC_DRIVE_EN;
|
|
if (val)
|
|
reg |= DDC_SCL_OUT;
|
|
else
|
|
reg &= ~DDC_SCL_OUT;
|
|
s3fb_ddc_write(par, reg);
|
|
}
|
|
|
|
static void s3fb_ddc_setsda(void *data, int val)
|
|
{
|
|
struct s3fb_info *par = data;
|
|
unsigned char reg;
|
|
|
|
reg = s3fb_ddc_read(par) | DDC_DRIVE_EN;
|
|
if (val)
|
|
reg |= DDC_SDA_OUT;
|
|
else
|
|
reg &= ~DDC_SDA_OUT;
|
|
s3fb_ddc_write(par, reg);
|
|
}
|
|
|
|
static int s3fb_ddc_getscl(void *data)
|
|
{
|
|
struct s3fb_info *par = data;
|
|
|
|
return !!(s3fb_ddc_read(par) & DDC_SCL_IN);
|
|
}
|
|
|
|
static int s3fb_ddc_getsda(void *data)
|
|
{
|
|
struct s3fb_info *par = data;
|
|
|
|
return !!(s3fb_ddc_read(par) & DDC_SDA_IN);
|
|
}
|
|
|
|
static int __devinit s3fb_setup_ddc_bus(struct fb_info *info)
|
|
{
|
|
struct s3fb_info *par = info->par;
|
|
|
|
strlcpy(par->ddc_adapter.name, info->fix.id,
|
|
sizeof(par->ddc_adapter.name));
|
|
par->ddc_adapter.owner = THIS_MODULE;
|
|
par->ddc_adapter.class = I2C_CLASS_DDC;
|
|
par->ddc_adapter.algo_data = &par->ddc_algo;
|
|
par->ddc_adapter.dev.parent = info->device;
|
|
par->ddc_algo.setsda = s3fb_ddc_setsda;
|
|
par->ddc_algo.setscl = s3fb_ddc_setscl;
|
|
par->ddc_algo.getsda = s3fb_ddc_getsda;
|
|
par->ddc_algo.getscl = s3fb_ddc_getscl;
|
|
par->ddc_algo.udelay = 10;
|
|
par->ddc_algo.timeout = 20;
|
|
par->ddc_algo.data = par;
|
|
|
|
i2c_set_adapdata(&par->ddc_adapter, par);
|
|
|
|
/*
|
|
* some Virge cards have external MUX to switch chip I2C bus between
|
|
* DDC and extension pins - switch it do DDC
|
|
*/
|
|
/* vga_wseq(par->state.vgabase, 0x08, 0x06); - not needed, already unlocked */
|
|
if (par->chip == CHIP_357_VIRGE_GX2 ||
|
|
par->chip == CHIP_359_VIRGE_GX2P ||
|
|
par->chip == CHIP_260_VIRGE_MX)
|
|
svga_wseq_mask(par->state.vgabase, 0x0d, 0x01, 0x03);
|
|
else
|
|
svga_wseq_mask(par->state.vgabase, 0x0d, 0x00, 0x03);
|
|
/* some Virge need this or the DDC is ignored */
|
|
svga_wcrt_mask(par->state.vgabase, 0x5c, 0x03, 0x03);
|
|
|
|
return i2c_bit_add_bus(&par->ddc_adapter);
|
|
}
|
|
#endif /* CONFIG_FB_S3_DDC */
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* Set font in S3 fast text mode */
|
|
|
|
static void s3fb_settile_fast(struct fb_info *info, struct fb_tilemap *map)
|
|
{
|
|
const u8 *font = map->data;
|
|
u8 __iomem *fb = (u8 __iomem *) info->screen_base;
|
|
int i, c;
|
|
|
|
if ((map->width != 8) || (map->height != 16) ||
|
|
(map->depth != 1) || (map->length != 256)) {
|
|
printk(KERN_ERR "fb%d: unsupported font parameters: width %d, height %d, depth %d, length %d\n",
|
|
info->node, map->width, map->height, map->depth, map->length);
|
|
return;
|
|
}
|
|
|
|
fb += 2;
|
|
for (i = 0; i < map->height; i++) {
|
|
for (c = 0; c < map->length; c++) {
|
|
fb_writeb(font[c * map->height + i], fb + c * 4);
|
|
}
|
|
fb += 1024;
|
|
}
|
|
}
|
|
|
|
static void s3fb_tilecursor(struct fb_info *info, struct fb_tilecursor *cursor)
|
|
{
|
|
struct s3fb_info *par = info->par;
|
|
|
|
svga_tilecursor(par->state.vgabase, info, cursor);
|
|
}
|
|
|
|
static struct fb_tile_ops s3fb_tile_ops = {
|
|
.fb_settile = svga_settile,
|
|
.fb_tilecopy = svga_tilecopy,
|
|
.fb_tilefill = svga_tilefill,
|
|
.fb_tileblit = svga_tileblit,
|
|
.fb_tilecursor = s3fb_tilecursor,
|
|
.fb_get_tilemax = svga_get_tilemax,
|
|
};
|
|
|
|
static struct fb_tile_ops s3fb_fast_tile_ops = {
|
|
.fb_settile = s3fb_settile_fast,
|
|
.fb_tilecopy = svga_tilecopy,
|
|
.fb_tilefill = svga_tilefill,
|
|
.fb_tileblit = svga_tileblit,
|
|
.fb_tilecursor = s3fb_tilecursor,
|
|
.fb_get_tilemax = svga_get_tilemax,
|
|
};
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* image data is MSB-first, fb structure is MSB-first too */
|
|
static inline u32 expand_color(u32 c)
|
|
{
|
|
return ((c & 1) | ((c & 2) << 7) | ((c & 4) << 14) | ((c & 8) << 21)) * 0xFF;
|
|
}
|
|
|
|
/* s3fb_iplan_imageblit silently assumes that almost everything is 8-pixel aligned */
|
|
static void s3fb_iplan_imageblit(struct fb_info *info, const struct fb_image *image)
|
|
{
|
|
u32 fg = expand_color(image->fg_color);
|
|
u32 bg = expand_color(image->bg_color);
|
|
const u8 *src1, *src;
|
|
u8 __iomem *dst1;
|
|
u32 __iomem *dst;
|
|
u32 val;
|
|
int x, y;
|
|
|
|
src1 = image->data;
|
|
dst1 = info->screen_base + (image->dy * info->fix.line_length)
|
|
+ ((image->dx / 8) * 4);
|
|
|
|
for (y = 0; y < image->height; y++) {
|
|
src = src1;
|
|
dst = (u32 __iomem *) dst1;
|
|
for (x = 0; x < image->width; x += 8) {
|
|
val = *(src++) * 0x01010101;
|
|
val = (val & fg) | (~val & bg);
|
|
fb_writel(val, dst++);
|
|
}
|
|
src1 += image->width / 8;
|
|
dst1 += info->fix.line_length;
|
|
}
|
|
|
|
}
|
|
|
|
/* s3fb_iplan_fillrect silently assumes that almost everything is 8-pixel aligned */
|
|
static void s3fb_iplan_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
|
|
{
|
|
u32 fg = expand_color(rect->color);
|
|
u8 __iomem *dst1;
|
|
u32 __iomem *dst;
|
|
int x, y;
|
|
|
|
dst1 = info->screen_base + (rect->dy * info->fix.line_length)
|
|
+ ((rect->dx / 8) * 4);
|
|
|
|
for (y = 0; y < rect->height; y++) {
|
|
dst = (u32 __iomem *) dst1;
|
|
for (x = 0; x < rect->width; x += 8) {
|
|
fb_writel(fg, dst++);
|
|
}
|
|
dst1 += info->fix.line_length;
|
|
}
|
|
}
|
|
|
|
|
|
/* image data is MSB-first, fb structure is high-nibble-in-low-byte-first */
|
|
static inline u32 expand_pixel(u32 c)
|
|
{
|
|
return (((c & 1) << 24) | ((c & 2) << 27) | ((c & 4) << 14) | ((c & 8) << 17) |
|
|
((c & 16) << 4) | ((c & 32) << 7) | ((c & 64) >> 6) | ((c & 128) >> 3)) * 0xF;
|
|
}
|
|
|
|
/* s3fb_cfb4_imageblit silently assumes that almost everything is 8-pixel aligned */
|
|
static void s3fb_cfb4_imageblit(struct fb_info *info, const struct fb_image *image)
|
|
{
|
|
u32 fg = image->fg_color * 0x11111111;
|
|
u32 bg = image->bg_color * 0x11111111;
|
|
const u8 *src1, *src;
|
|
u8 __iomem *dst1;
|
|
u32 __iomem *dst;
|
|
u32 val;
|
|
int x, y;
|
|
|
|
src1 = image->data;
|
|
dst1 = info->screen_base + (image->dy * info->fix.line_length)
|
|
+ ((image->dx / 8) * 4);
|
|
|
|
for (y = 0; y < image->height; y++) {
|
|
src = src1;
|
|
dst = (u32 __iomem *) dst1;
|
|
for (x = 0; x < image->width; x += 8) {
|
|
val = expand_pixel(*(src++));
|
|
val = (val & fg) | (~val & bg);
|
|
fb_writel(val, dst++);
|
|
}
|
|
src1 += image->width / 8;
|
|
dst1 += info->fix.line_length;
|
|
}
|
|
}
|
|
|
|
static void s3fb_imageblit(struct fb_info *info, const struct fb_image *image)
|
|
{
|
|
if ((info->var.bits_per_pixel == 4) && (image->depth == 1)
|
|
&& ((image->width % 8) == 0) && ((image->dx % 8) == 0)) {
|
|
if (info->fix.type == FB_TYPE_INTERLEAVED_PLANES)
|
|
s3fb_iplan_imageblit(info, image);
|
|
else
|
|
s3fb_cfb4_imageblit(info, image);
|
|
} else
|
|
cfb_imageblit(info, image);
|
|
}
|
|
|
|
static void s3fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
|
|
{
|
|
if ((info->var.bits_per_pixel == 4)
|
|
&& ((rect->width % 8) == 0) && ((rect->dx % 8) == 0)
|
|
&& (info->fix.type == FB_TYPE_INTERLEAVED_PLANES))
|
|
s3fb_iplan_fillrect(info, rect);
|
|
else
|
|
cfb_fillrect(info, rect);
|
|
}
|
|
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
static void s3_set_pixclock(struct fb_info *info, u32 pixclock)
|
|
{
|
|
struct s3fb_info *par = info->par;
|
|
u16 m, n, r;
|
|
u8 regval;
|
|
int rv;
|
|
|
|
rv = svga_compute_pll((par->chip == CHIP_365_TRIO3D) ? &s3_trio3d_pll : &s3_pll,
|
|
1000000000 / pixclock, &m, &n, &r, info->node);
|
|
if (rv < 0) {
|
|
printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node);
|
|
return;
|
|
}
|
|
|
|
/* Set VGA misc register */
|
|
regval = vga_r(par->state.vgabase, VGA_MIS_R);
|
|
vga_w(par->state.vgabase, VGA_MIS_W, regval | VGA_MIS_ENB_PLL_LOAD);
|
|
|
|
/* Set S3 clock registers */
|
|
if (par->chip == CHIP_357_VIRGE_GX2 ||
|
|
par->chip == CHIP_359_VIRGE_GX2P ||
|
|
par->chip == CHIP_360_TRIO3D_1X ||
|
|
par->chip == CHIP_362_TRIO3D_2X ||
|
|
par->chip == CHIP_368_TRIO3D_2X ||
|
|
par->chip == CHIP_260_VIRGE_MX) {
|
|
vga_wseq(par->state.vgabase, 0x12, (n - 2) | ((r & 3) << 6)); /* n and two bits of r */
|
|
vga_wseq(par->state.vgabase, 0x29, r >> 2); /* remaining highest bit of r */
|
|
} else
|
|
vga_wseq(par->state.vgabase, 0x12, (n - 2) | (r << 5));
|
|
vga_wseq(par->state.vgabase, 0x13, m - 2);
|
|
|
|
udelay(1000);
|
|
|
|
/* Activate clock - write 0, 1, 0 to seq/15 bit 5 */
|
|
regval = vga_rseq (par->state.vgabase, 0x15); /* | 0x80; */
|
|
vga_wseq(par->state.vgabase, 0x15, regval & ~(1<<5));
|
|
vga_wseq(par->state.vgabase, 0x15, regval | (1<<5));
|
|
vga_wseq(par->state.vgabase, 0x15, regval & ~(1<<5));
|
|
}
|
|
|
|
|
|
/* Open framebuffer */
|
|
|
|
static int s3fb_open(struct fb_info *info, int user)
|
|
{
|
|
struct s3fb_info *par = info->par;
|
|
|
|
mutex_lock(&(par->open_lock));
|
|
if (par->ref_count == 0) {
|
|
void __iomem *vgabase = par->state.vgabase;
|
|
|
|
memset(&(par->state), 0, sizeof(struct vgastate));
|
|
par->state.vgabase = vgabase;
|
|
par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS | VGA_SAVE_CMAP;
|
|
par->state.num_crtc = 0x70;
|
|
par->state.num_seq = 0x20;
|
|
save_vga(&(par->state));
|
|
}
|
|
|
|
par->ref_count++;
|
|
mutex_unlock(&(par->open_lock));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Close framebuffer */
|
|
|
|
static int s3fb_release(struct fb_info *info, int user)
|
|
{
|
|
struct s3fb_info *par = info->par;
|
|
|
|
mutex_lock(&(par->open_lock));
|
|
if (par->ref_count == 0) {
|
|
mutex_unlock(&(par->open_lock));
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (par->ref_count == 1)
|
|
restore_vga(&(par->state));
|
|
|
|
par->ref_count--;
|
|
mutex_unlock(&(par->open_lock));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Validate passed in var */
|
|
|
|
static int s3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
|
|
{
|
|
struct s3fb_info *par = info->par;
|
|
int rv, mem, step;
|
|
u16 m, n, r;
|
|
|
|
/* Find appropriate format */
|
|
rv = svga_match_format (s3fb_formats, var, NULL);
|
|
|
|
/* 32bpp mode is not supported on VIRGE VX,
|
|
24bpp is not supported on others */
|
|
if ((par->chip == CHIP_988_VIRGE_VX) ? (rv == 7) : (rv == 6))
|
|
rv = -EINVAL;
|
|
|
|
if (rv < 0) {
|
|
printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node);
|
|
return rv;
|
|
}
|
|
|
|
/* Do not allow to have real resoulution larger than virtual */
|
|
if (var->xres > var->xres_virtual)
|
|
var->xres_virtual = var->xres;
|
|
|
|
if (var->yres > var->yres_virtual)
|
|
var->yres_virtual = var->yres;
|
|
|
|
/* Round up xres_virtual to have proper alignment of lines */
|
|
step = s3fb_formats[rv].xresstep - 1;
|
|
var->xres_virtual = (var->xres_virtual+step) & ~step;
|
|
|
|
/* Check whether have enough memory */
|
|
mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual;
|
|
if (mem > info->screen_size) {
|
|
printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n",
|
|
info->node, mem >> 10, (unsigned int) (info->screen_size >> 10));
|
|
return -EINVAL;
|
|
}
|
|
|
|
rv = svga_check_timings (&s3_timing_regs, var, info->node);
|
|
if (rv < 0) {
|
|
printk(KERN_ERR "fb%d: invalid timings requested\n", info->node);
|
|
return rv;
|
|
}
|
|
|
|
rv = svga_compute_pll(&s3_pll, PICOS2KHZ(var->pixclock), &m, &n, &r,
|
|
info->node);
|
|
if (rv < 0) {
|
|
printk(KERN_ERR "fb%d: invalid pixclock value requested\n",
|
|
info->node);
|
|
return rv;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set video mode from par */
|
|
|
|
static int s3fb_set_par(struct fb_info *info)
|
|
{
|
|
struct s3fb_info *par = info->par;
|
|
u32 value, mode, hmul, offset_value, screen_size, multiplex, dbytes;
|
|
u32 bpp = info->var.bits_per_pixel;
|
|
u32 htotal, hsstart;
|
|
|
|
if (bpp != 0) {
|
|
info->fix.ypanstep = 1;
|
|
info->fix.line_length = (info->var.xres_virtual * bpp) / 8;
|
|
|
|
info->flags &= ~FBINFO_MISC_TILEBLITTING;
|
|
info->tileops = NULL;
|
|
|
|
/* in 4bpp supports 8p wide tiles only, any tiles otherwise */
|
|
info->pixmap.blit_x = (bpp == 4) ? (1 << (8 - 1)) : (~(u32)0);
|
|
info->pixmap.blit_y = ~(u32)0;
|
|
|
|
offset_value = (info->var.xres_virtual * bpp) / 64;
|
|
screen_size = info->var.yres_virtual * info->fix.line_length;
|
|
} else {
|
|
info->fix.ypanstep = 16;
|
|
info->fix.line_length = 0;
|
|
|
|
info->flags |= FBINFO_MISC_TILEBLITTING;
|
|
info->tileops = fasttext ? &s3fb_fast_tile_ops : &s3fb_tile_ops;
|
|
|
|
/* supports 8x16 tiles only */
|
|
info->pixmap.blit_x = 1 << (8 - 1);
|
|
info->pixmap.blit_y = 1 << (16 - 1);
|
|
|
|
offset_value = info->var.xres_virtual / 16;
|
|
screen_size = (info->var.xres_virtual * info->var.yres_virtual) / 64;
|
|
}
|
|
|
|
info->var.xoffset = 0;
|
|
info->var.yoffset = 0;
|
|
info->var.activate = FB_ACTIVATE_NOW;
|
|
|
|
/* Unlock registers */
|
|
vga_wcrt(par->state.vgabase, 0x38, 0x48);
|
|
vga_wcrt(par->state.vgabase, 0x39, 0xA5);
|
|
vga_wseq(par->state.vgabase, 0x08, 0x06);
|
|
svga_wcrt_mask(par->state.vgabase, 0x11, 0x00, 0x80);
|
|
|
|
/* Blank screen and turn off sync */
|
|
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
|
|
svga_wcrt_mask(par->state.vgabase, 0x17, 0x00, 0x80);
|
|
|
|
/* Set default values */
|
|
svga_set_default_gfx_regs(par->state.vgabase);
|
|
svga_set_default_atc_regs(par->state.vgabase);
|
|
svga_set_default_seq_regs(par->state.vgabase);
|
|
svga_set_default_crt_regs(par->state.vgabase);
|
|
svga_wcrt_multi(par->state.vgabase, s3_line_compare_regs, 0xFFFFFFFF);
|
|
svga_wcrt_multi(par->state.vgabase, s3_start_address_regs, 0);
|
|
|
|
/* S3 specific initialization */
|
|
svga_wcrt_mask(par->state.vgabase, 0x58, 0x10, 0x10); /* enable linear framebuffer */
|
|
svga_wcrt_mask(par->state.vgabase, 0x31, 0x08, 0x08); /* enable sequencer access to framebuffer above 256 kB */
|
|
|
|
/* svga_wcrt_mask(par->state.vgabase, 0x33, 0x08, 0x08); */ /* DDR ? */
|
|
/* svga_wcrt_mask(par->state.vgabase, 0x43, 0x01, 0x01); */ /* DDR ? */
|
|
svga_wcrt_mask(par->state.vgabase, 0x33, 0x00, 0x08); /* no DDR ? */
|
|
svga_wcrt_mask(par->state.vgabase, 0x43, 0x00, 0x01); /* no DDR ? */
|
|
|
|
svga_wcrt_mask(par->state.vgabase, 0x5D, 0x00, 0x28); /* Clear strange HSlen bits */
|
|
|
|
/* svga_wcrt_mask(par->state.vgabase, 0x58, 0x03, 0x03); */
|
|
|
|
/* svga_wcrt_mask(par->state.vgabase, 0x53, 0x12, 0x13); */ /* enable MMIO */
|
|
/* svga_wcrt_mask(par->state.vgabase, 0x40, 0x08, 0x08); */ /* enable write buffer */
|
|
|
|
|
|
/* Set the offset register */
|
|
pr_debug("fb%d: offset register : %d\n", info->node, offset_value);
|
|
svga_wcrt_multi(par->state.vgabase, s3_offset_regs, offset_value);
|
|
|
|
if (par->chip != CHIP_357_VIRGE_GX2 &&
|
|
par->chip != CHIP_359_VIRGE_GX2P &&
|
|
par->chip != CHIP_360_TRIO3D_1X &&
|
|
par->chip != CHIP_362_TRIO3D_2X &&
|
|
par->chip != CHIP_368_TRIO3D_2X &&
|
|
par->chip != CHIP_260_VIRGE_MX) {
|
|
vga_wcrt(par->state.vgabase, 0x54, 0x18); /* M parameter */
|
|
vga_wcrt(par->state.vgabase, 0x60, 0xff); /* N parameter */
|
|
vga_wcrt(par->state.vgabase, 0x61, 0xff); /* L parameter */
|
|
vga_wcrt(par->state.vgabase, 0x62, 0xff); /* L parameter */
|
|
}
|
|
|
|
vga_wcrt(par->state.vgabase, 0x3A, 0x35);
|
|
svga_wattr(par->state.vgabase, 0x33, 0x00);
|
|
|
|
if (info->var.vmode & FB_VMODE_DOUBLE)
|
|
svga_wcrt_mask(par->state.vgabase, 0x09, 0x80, 0x80);
|
|
else
|
|
svga_wcrt_mask(par->state.vgabase, 0x09, 0x00, 0x80);
|
|
|
|
if (info->var.vmode & FB_VMODE_INTERLACED)
|
|
svga_wcrt_mask(par->state.vgabase, 0x42, 0x20, 0x20);
|
|
else
|
|
svga_wcrt_mask(par->state.vgabase, 0x42, 0x00, 0x20);
|
|
|
|
/* Disable hardware graphics cursor */
|
|
svga_wcrt_mask(par->state.vgabase, 0x45, 0x00, 0x01);
|
|
/* Disable Streams engine */
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0x0C);
|
|
|
|
mode = svga_match_format(s3fb_formats, &(info->var), &(info->fix));
|
|
|
|
/* S3 virge DX hack */
|
|
if (par->chip == CHIP_375_VIRGE_DX) {
|
|
vga_wcrt(par->state.vgabase, 0x86, 0x80);
|
|
vga_wcrt(par->state.vgabase, 0x90, 0x00);
|
|
}
|
|
|
|
/* S3 virge VX hack */
|
|
if (par->chip == CHIP_988_VIRGE_VX) {
|
|
vga_wcrt(par->state.vgabase, 0x50, 0x00);
|
|
vga_wcrt(par->state.vgabase, 0x67, 0x50);
|
|
msleep(10); /* screen remains blank sometimes without this */
|
|
vga_wcrt(par->state.vgabase, 0x63, (mode <= 2) ? 0x90 : 0x09);
|
|
vga_wcrt(par->state.vgabase, 0x66, 0x90);
|
|
}
|
|
|
|
if (par->chip == CHIP_357_VIRGE_GX2 ||
|
|
par->chip == CHIP_359_VIRGE_GX2P ||
|
|
par->chip == CHIP_360_TRIO3D_1X ||
|
|
par->chip == CHIP_362_TRIO3D_2X ||
|
|
par->chip == CHIP_368_TRIO3D_2X ||
|
|
par->chip == CHIP_365_TRIO3D ||
|
|
par->chip == CHIP_375_VIRGE_DX ||
|
|
par->chip == CHIP_385_VIRGE_GX ||
|
|
par->chip == CHIP_260_VIRGE_MX) {
|
|
dbytes = info->var.xres * ((bpp+7)/8);
|
|
vga_wcrt(par->state.vgabase, 0x91, (dbytes + 7) / 8);
|
|
vga_wcrt(par->state.vgabase, 0x90, (((dbytes + 7) / 8) >> 8) | 0x80);
|
|
|
|
vga_wcrt(par->state.vgabase, 0x66, 0x81);
|
|
}
|
|
|
|
if (par->chip == CHIP_357_VIRGE_GX2 ||
|
|
par->chip == CHIP_359_VIRGE_GX2P ||
|
|
par->chip == CHIP_360_TRIO3D_1X ||
|
|
par->chip == CHIP_362_TRIO3D_2X ||
|
|
par->chip == CHIP_368_TRIO3D_2X ||
|
|
par->chip == CHIP_260_VIRGE_MX)
|
|
vga_wcrt(par->state.vgabase, 0x34, 0x00);
|
|
else /* enable Data Transfer Position Control (DTPC) */
|
|
vga_wcrt(par->state.vgabase, 0x34, 0x10);
|
|
|
|
svga_wcrt_mask(par->state.vgabase, 0x31, 0x00, 0x40);
|
|
multiplex = 0;
|
|
hmul = 1;
|
|
|
|
/* Set mode-specific register values */
|
|
switch (mode) {
|
|
case 0:
|
|
pr_debug("fb%d: text mode\n", info->node);
|
|
svga_set_textmode_vga_regs(par->state.vgabase);
|
|
|
|
/* Set additional registers like in 8-bit mode */
|
|
svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
|
|
|
|
/* Disable enhanced mode */
|
|
svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
|
|
|
|
if (fasttext) {
|
|
pr_debug("fb%d: high speed text mode set\n", info->node);
|
|
svga_wcrt_mask(par->state.vgabase, 0x31, 0x40, 0x40);
|
|
}
|
|
break;
|
|
case 1:
|
|
pr_debug("fb%d: 4 bit pseudocolor\n", info->node);
|
|
vga_wgfx(par->state.vgabase, VGA_GFX_MODE, 0x40);
|
|
|
|
/* Set additional registers like in 8-bit mode */
|
|
svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
|
|
|
|
/* disable enhanced mode */
|
|
svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
|
|
break;
|
|
case 2:
|
|
pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node);
|
|
|
|
/* Set additional registers like in 8-bit mode */
|
|
svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
|
|
|
|
/* disable enhanced mode */
|
|
svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
|
|
break;
|
|
case 3:
|
|
pr_debug("fb%d: 8 bit pseudocolor\n", info->node);
|
|
svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
|
|
if (info->var.pixclock > 20000 ||
|
|
par->chip == CHIP_357_VIRGE_GX2 ||
|
|
par->chip == CHIP_359_VIRGE_GX2P ||
|
|
par->chip == CHIP_360_TRIO3D_1X ||
|
|
par->chip == CHIP_362_TRIO3D_2X ||
|
|
par->chip == CHIP_368_TRIO3D_2X ||
|
|
par->chip == CHIP_260_VIRGE_MX)
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0);
|
|
else {
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x10, 0xF0);
|
|
multiplex = 1;
|
|
}
|
|
break;
|
|
case 4:
|
|
pr_debug("fb%d: 5/5/5 truecolor\n", info->node);
|
|
if (par->chip == CHIP_988_VIRGE_VX) {
|
|
if (info->var.pixclock > 20000)
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0);
|
|
else
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
|
|
} else if (par->chip == CHIP_365_TRIO3D) {
|
|
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
|
|
if (info->var.pixclock > 8695) {
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
|
|
hmul = 2;
|
|
} else {
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0);
|
|
multiplex = 1;
|
|
}
|
|
} else {
|
|
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
|
|
if (par->chip != CHIP_357_VIRGE_GX2 &&
|
|
par->chip != CHIP_359_VIRGE_GX2P &&
|
|
par->chip != CHIP_360_TRIO3D_1X &&
|
|
par->chip != CHIP_362_TRIO3D_2X &&
|
|
par->chip != CHIP_368_TRIO3D_2X &&
|
|
par->chip != CHIP_260_VIRGE_MX)
|
|
hmul = 2;
|
|
}
|
|
break;
|
|
case 5:
|
|
pr_debug("fb%d: 5/6/5 truecolor\n", info->node);
|
|
if (par->chip == CHIP_988_VIRGE_VX) {
|
|
if (info->var.pixclock > 20000)
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0);
|
|
else
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
|
|
} else if (par->chip == CHIP_365_TRIO3D) {
|
|
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
|
|
if (info->var.pixclock > 8695) {
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
|
|
hmul = 2;
|
|
} else {
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0);
|
|
multiplex = 1;
|
|
}
|
|
} else {
|
|
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
|
|
if (par->chip != CHIP_357_VIRGE_GX2 &&
|
|
par->chip != CHIP_359_VIRGE_GX2P &&
|
|
par->chip != CHIP_360_TRIO3D_1X &&
|
|
par->chip != CHIP_362_TRIO3D_2X &&
|
|
par->chip != CHIP_368_TRIO3D_2X &&
|
|
par->chip != CHIP_260_VIRGE_MX)
|
|
hmul = 2;
|
|
}
|
|
break;
|
|
case 6:
|
|
/* VIRGE VX case */
|
|
pr_debug("fb%d: 8/8/8 truecolor\n", info->node);
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0xD0, 0xF0);
|
|
break;
|
|
case 7:
|
|
pr_debug("fb%d: 8/8/8/8 truecolor\n", info->node);
|
|
svga_wcrt_mask(par->state.vgabase, 0x50, 0x30, 0x30);
|
|
svga_wcrt_mask(par->state.vgabase, 0x67, 0xD0, 0xF0);
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "fb%d: unsupported mode - bug\n", info->node);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (par->chip != CHIP_988_VIRGE_VX) {
|
|
svga_wseq_mask(par->state.vgabase, 0x15, multiplex ? 0x10 : 0x00, 0x10);
|
|
svga_wseq_mask(par->state.vgabase, 0x18, multiplex ? 0x80 : 0x00, 0x80);
|
|
}
|
|
|
|
s3_set_pixclock(info, info->var.pixclock);
|
|
svga_set_timings(par->state.vgabase, &s3_timing_regs, &(info->var), hmul, 1,
|
|
(info->var.vmode & FB_VMODE_DOUBLE) ? 2 : 1,
|
|
(info->var.vmode & FB_VMODE_INTERLACED) ? 2 : 1,
|
|
hmul, info->node);
|
|
|
|
/* Set interlaced mode start/end register */
|
|
htotal = info->var.xres + info->var.left_margin + info->var.right_margin + info->var.hsync_len;
|
|
htotal = ((htotal * hmul) / 8) - 5;
|
|
vga_wcrt(par->state.vgabase, 0x3C, (htotal + 1) / 2);
|
|
|
|
/* Set Data Transfer Position */
|
|
hsstart = ((info->var.xres + info->var.right_margin) * hmul) / 8;
|
|
/* + 2 is needed for Virge/VX, does no harm on other cards */
|
|
value = clamp((htotal + hsstart + 1) / 2 + 2, hsstart + 4, htotal + 1);
|
|
svga_wcrt_multi(par->state.vgabase, s3_dtpc_regs, value);
|
|
|
|
memset_io(info->screen_base, 0x00, screen_size);
|
|
/* Device and screen back on */
|
|
svga_wcrt_mask(par->state.vgabase, 0x17, 0x80, 0x80);
|
|
svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set a colour register */
|
|
|
|
static int s3fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
|
|
u_int transp, struct fb_info *fb)
|
|
{
|
|
switch (fb->var.bits_per_pixel) {
|
|
case 0:
|
|
case 4:
|
|
if (regno >= 16)
|
|
return -EINVAL;
|
|
|
|
if ((fb->var.bits_per_pixel == 4) &&
|
|
(fb->var.nonstd == 0)) {
|
|
outb(0xF0, VGA_PEL_MSK);
|
|
outb(regno*16, VGA_PEL_IW);
|
|
} else {
|
|
outb(0x0F, VGA_PEL_MSK);
|
|
outb(regno, VGA_PEL_IW);
|
|
}
|
|
outb(red >> 10, VGA_PEL_D);
|
|
outb(green >> 10, VGA_PEL_D);
|
|
outb(blue >> 10, VGA_PEL_D);
|
|
break;
|
|
case 8:
|
|
if (regno >= 256)
|
|
return -EINVAL;
|
|
|
|
outb(0xFF, VGA_PEL_MSK);
|
|
outb(regno, VGA_PEL_IW);
|
|
outb(red >> 10, VGA_PEL_D);
|
|
outb(green >> 10, VGA_PEL_D);
|
|
outb(blue >> 10, VGA_PEL_D);
|
|
break;
|
|
case 16:
|
|
if (regno >= 16)
|
|
return 0;
|
|
|
|
if (fb->var.green.length == 5)
|
|
((u32*)fb->pseudo_palette)[regno] = ((red & 0xF800) >> 1) |
|
|
((green & 0xF800) >> 6) | ((blue & 0xF800) >> 11);
|
|
else if (fb->var.green.length == 6)
|
|
((u32*)fb->pseudo_palette)[regno] = (red & 0xF800) |
|
|
((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
|
|
else return -EINVAL;
|
|
break;
|
|
case 24:
|
|
case 32:
|
|
if (regno >= 16)
|
|
return 0;
|
|
|
|
((u32*)fb->pseudo_palette)[regno] = ((red & 0xFF00) << 8) |
|
|
(green & 0xFF00) | ((blue & 0xFF00) >> 8);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Set the display blanking state */
|
|
|
|
static int s3fb_blank(int blank_mode, struct fb_info *info)
|
|
{
|
|
struct s3fb_info *par = info->par;
|
|
|
|
switch (blank_mode) {
|
|
case FB_BLANK_UNBLANK:
|
|
pr_debug("fb%d: unblank\n", info->node);
|
|
svga_wcrt_mask(par->state.vgabase, 0x56, 0x00, 0x06);
|
|
svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20);
|
|
break;
|
|
case FB_BLANK_NORMAL:
|
|
pr_debug("fb%d: blank\n", info->node);
|
|
svga_wcrt_mask(par->state.vgabase, 0x56, 0x00, 0x06);
|
|
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
|
|
break;
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
pr_debug("fb%d: hsync\n", info->node);
|
|
svga_wcrt_mask(par->state.vgabase, 0x56, 0x02, 0x06);
|
|
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
|
|
break;
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
pr_debug("fb%d: vsync\n", info->node);
|
|
svga_wcrt_mask(par->state.vgabase, 0x56, 0x04, 0x06);
|
|
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
|
|
break;
|
|
case FB_BLANK_POWERDOWN:
|
|
pr_debug("fb%d: sync down\n", info->node);
|
|
svga_wcrt_mask(par->state.vgabase, 0x56, 0x06, 0x06);
|
|
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Pan the display */
|
|
|
|
static int s3fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
|
|
{
|
|
struct s3fb_info *par = info->par;
|
|
unsigned int offset;
|
|
|
|
/* Calculate the offset */
|
|
if (info->var.bits_per_pixel == 0) {
|
|
offset = (var->yoffset / 16) * (info->var.xres_virtual / 2)
|
|
+ (var->xoffset / 2);
|
|
offset = offset >> 2;
|
|
} else {
|
|
offset = (var->yoffset * info->fix.line_length) +
|
|
(var->xoffset * info->var.bits_per_pixel / 8);
|
|
offset = offset >> 2;
|
|
}
|
|
|
|
/* Set the offset */
|
|
svga_wcrt_multi(par->state.vgabase, s3_start_address_regs, offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* Frame buffer operations */
|
|
|
|
static struct fb_ops s3fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_open = s3fb_open,
|
|
.fb_release = s3fb_release,
|
|
.fb_check_var = s3fb_check_var,
|
|
.fb_set_par = s3fb_set_par,
|
|
.fb_setcolreg = s3fb_setcolreg,
|
|
.fb_blank = s3fb_blank,
|
|
.fb_pan_display = s3fb_pan_display,
|
|
.fb_fillrect = s3fb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = s3fb_imageblit,
|
|
.fb_get_caps = svga_get_caps,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int __devinit s3_identification(struct s3fb_info *par)
|
|
{
|
|
int chip = par->chip;
|
|
|
|
if (chip == CHIP_XXX_TRIO) {
|
|
u8 cr30 = vga_rcrt(par->state.vgabase, 0x30);
|
|
u8 cr2e = vga_rcrt(par->state.vgabase, 0x2e);
|
|
u8 cr2f = vga_rcrt(par->state.vgabase, 0x2f);
|
|
|
|
if ((cr30 == 0xE0) || (cr30 == 0xE1)) {
|
|
if (cr2e == 0x10)
|
|
return CHIP_732_TRIO32;
|
|
if (cr2e == 0x11) {
|
|
if (! (cr2f & 0x40))
|
|
return CHIP_764_TRIO64;
|
|
else
|
|
return CHIP_765_TRIO64VP;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (chip == CHIP_XXX_TRIO64V2_DXGX) {
|
|
u8 cr6f = vga_rcrt(par->state.vgabase, 0x6f);
|
|
|
|
if (! (cr6f & 0x01))
|
|
return CHIP_775_TRIO64V2_DX;
|
|
else
|
|
return CHIP_785_TRIO64V2_GX;
|
|
}
|
|
|
|
if (chip == CHIP_XXX_VIRGE_DXGX) {
|
|
u8 cr6f = vga_rcrt(par->state.vgabase, 0x6f);
|
|
|
|
if (! (cr6f & 0x01))
|
|
return CHIP_375_VIRGE_DX;
|
|
else
|
|
return CHIP_385_VIRGE_GX;
|
|
}
|
|
|
|
if (chip == CHIP_36X_TRIO3D_1X_2X) {
|
|
switch (vga_rcrt(par->state.vgabase, 0x2f)) {
|
|
case 0x00:
|
|
return CHIP_360_TRIO3D_1X;
|
|
case 0x01:
|
|
return CHIP_362_TRIO3D_2X;
|
|
case 0x02:
|
|
return CHIP_368_TRIO3D_2X;
|
|
}
|
|
}
|
|
|
|
return CHIP_UNKNOWN;
|
|
}
|
|
|
|
|
|
/* PCI probe */
|
|
|
|
static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
struct pci_bus_region bus_reg;
|
|
struct resource vga_res;
|
|
struct fb_info *info;
|
|
struct s3fb_info *par;
|
|
int rc;
|
|
u8 regval, cr38, cr39;
|
|
bool found = false;
|
|
|
|
/* Ignore secondary VGA device because there is no VGA arbitration */
|
|
if (! svga_primary_device(dev)) {
|
|
dev_info(&(dev->dev), "ignoring secondary device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Allocate and fill driver data structure */
|
|
info = framebuffer_alloc(sizeof(struct s3fb_info), &(dev->dev));
|
|
if (!info) {
|
|
dev_err(&(dev->dev), "cannot allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
par = info->par;
|
|
mutex_init(&par->open_lock);
|
|
|
|
info->flags = FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN;
|
|
info->fbops = &s3fb_ops;
|
|
|
|
/* Prepare PCI device */
|
|
rc = pci_enable_device(dev);
|
|
if (rc < 0) {
|
|
dev_err(info->device, "cannot enable PCI device\n");
|
|
goto err_enable_device;
|
|
}
|
|
|
|
rc = pci_request_regions(dev, "s3fb");
|
|
if (rc < 0) {
|
|
dev_err(info->device, "cannot reserve framebuffer region\n");
|
|
goto err_request_regions;
|
|
}
|
|
|
|
|
|
info->fix.smem_start = pci_resource_start(dev, 0);
|
|
info->fix.smem_len = pci_resource_len(dev, 0);
|
|
|
|
/* Map physical IO memory address into kernel space */
|
|
info->screen_base = pci_iomap(dev, 0, 0);
|
|
if (! info->screen_base) {
|
|
rc = -ENOMEM;
|
|
dev_err(info->device, "iomap for framebuffer failed\n");
|
|
goto err_iomap;
|
|
}
|
|
|
|
bus_reg.start = 0;
|
|
bus_reg.end = 64 * 1024;
|
|
|
|
vga_res.flags = IORESOURCE_IO;
|
|
|
|
pcibios_bus_to_resource(dev, &vga_res, &bus_reg);
|
|
|
|
par->state.vgabase = (void __iomem *) vga_res.start;
|
|
|
|
/* Unlock regs */
|
|
cr38 = vga_rcrt(par->state.vgabase, 0x38);
|
|
cr39 = vga_rcrt(par->state.vgabase, 0x39);
|
|
vga_wseq(par->state.vgabase, 0x08, 0x06);
|
|
vga_wcrt(par->state.vgabase, 0x38, 0x48);
|
|
vga_wcrt(par->state.vgabase, 0x39, 0xA5);
|
|
|
|
/* Identify chip type */
|
|
par->chip = id->driver_data & CHIP_MASK;
|
|
par->rev = vga_rcrt(par->state.vgabase, 0x2f);
|
|
if (par->chip & CHIP_UNDECIDED_FLAG)
|
|
par->chip = s3_identification(par);
|
|
|
|
/* Find how many physical memory there is on card */
|
|
/* 0x36 register is accessible even if other registers are locked */
|
|
regval = vga_rcrt(par->state.vgabase, 0x36);
|
|
if (par->chip == CHIP_360_TRIO3D_1X ||
|
|
par->chip == CHIP_362_TRIO3D_2X ||
|
|
par->chip == CHIP_368_TRIO3D_2X ||
|
|
par->chip == CHIP_365_TRIO3D) {
|
|
switch ((regval & 0xE0) >> 5) {
|
|
case 0: /* 8MB -- only 4MB usable for display */
|
|
case 1: /* 4MB with 32-bit bus */
|
|
case 2: /* 4MB */
|
|
info->screen_size = 4 << 20;
|
|
break;
|
|
case 4: /* 2MB on 365 Trio3D */
|
|
case 6: /* 2MB */
|
|
info->screen_size = 2 << 20;
|
|
break;
|
|
}
|
|
} else if (par->chip == CHIP_357_VIRGE_GX2 ||
|
|
par->chip == CHIP_359_VIRGE_GX2P ||
|
|
par->chip == CHIP_260_VIRGE_MX) {
|
|
switch ((regval & 0xC0) >> 6) {
|
|
case 1: /* 4MB */
|
|
info->screen_size = 4 << 20;
|
|
break;
|
|
case 3: /* 2MB */
|
|
info->screen_size = 2 << 20;
|
|
break;
|
|
}
|
|
} else if (par->chip == CHIP_988_VIRGE_VX) {
|
|
switch ((regval & 0x60) >> 5) {
|
|
case 0: /* 2MB */
|
|
info->screen_size = 2 << 20;
|
|
break;
|
|
case 1: /* 4MB */
|
|
info->screen_size = 4 << 20;
|
|
break;
|
|
case 2: /* 6MB */
|
|
info->screen_size = 6 << 20;
|
|
break;
|
|
case 3: /* 8MB */
|
|
info->screen_size = 8 << 20;
|
|
break;
|
|
}
|
|
/* off-screen memory */
|
|
regval = vga_rcrt(par->state.vgabase, 0x37);
|
|
switch ((regval & 0x60) >> 5) {
|
|
case 1: /* 4MB */
|
|
info->screen_size -= 4 << 20;
|
|
break;
|
|
case 2: /* 2MB */
|
|
info->screen_size -= 2 << 20;
|
|
break;
|
|
}
|
|
} else
|
|
info->screen_size = s3_memsizes[regval >> 5] << 10;
|
|
info->fix.smem_len = info->screen_size;
|
|
|
|
/* Find MCLK frequency */
|
|
regval = vga_rseq(par->state.vgabase, 0x10);
|
|
par->mclk_freq = ((vga_rseq(par->state.vgabase, 0x11) + 2) * 14318) / ((regval & 0x1F) + 2);
|
|
par->mclk_freq = par->mclk_freq >> (regval >> 5);
|
|
|
|
/* Restore locks */
|
|
vga_wcrt(par->state.vgabase, 0x38, cr38);
|
|
vga_wcrt(par->state.vgabase, 0x39, cr39);
|
|
|
|
strcpy(info->fix.id, s3_names [par->chip]);
|
|
info->fix.mmio_start = 0;
|
|
info->fix.mmio_len = 0;
|
|
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
|
info->fix.ypanstep = 0;
|
|
info->fix.accel = FB_ACCEL_NONE;
|
|
info->pseudo_palette = (void*) (par->pseudo_palette);
|
|
info->var.bits_per_pixel = 8;
|
|
|
|
#ifdef CONFIG_FB_S3_DDC
|
|
/* Enable MMIO if needed */
|
|
if (s3fb_ddc_needs_mmio(par->chip)) {
|
|
par->mmio = ioremap(info->fix.smem_start + MMIO_OFFSET, MMIO_SIZE);
|
|
if (par->mmio)
|
|
svga_wcrt_mask(par->state.vgabase, 0x53, 0x08, 0x08); /* enable MMIO */
|
|
else
|
|
dev_err(info->device, "unable to map MMIO at 0x%lx, disabling DDC",
|
|
info->fix.smem_start + MMIO_OFFSET);
|
|
}
|
|
if (!s3fb_ddc_needs_mmio(par->chip) || par->mmio)
|
|
if (s3fb_setup_ddc_bus(info) == 0) {
|
|
u8 *edid = fb_ddc_read(&par->ddc_adapter);
|
|
par->ddc_registered = true;
|
|
if (edid) {
|
|
fb_edid_to_monspecs(edid, &info->monspecs);
|
|
kfree(edid);
|
|
if (!info->monspecs.modedb)
|
|
dev_err(info->device, "error getting mode database\n");
|
|
else {
|
|
const struct fb_videomode *m;
|
|
|
|
fb_videomode_to_modelist(info->monspecs.modedb,
|
|
info->monspecs.modedb_len,
|
|
&info->modelist);
|
|
m = fb_find_best_display(&info->monspecs, &info->modelist);
|
|
if (m) {
|
|
fb_videomode_to_var(&info->var, m);
|
|
/* fill all other info->var's fields */
|
|
if (s3fb_check_var(&info->var, info) == 0)
|
|
found = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
if (!mode_option && !found)
|
|
mode_option = "640x480-8@60";
|
|
|
|
/* Prepare startup mode */
|
|
if (mode_option) {
|
|
rc = fb_find_mode(&info->var, info, mode_option,
|
|
info->monspecs.modedb, info->monspecs.modedb_len,
|
|
NULL, info->var.bits_per_pixel);
|
|
if (!rc || rc == 4) {
|
|
rc = -EINVAL;
|
|
dev_err(info->device, "mode %s not found\n", mode_option);
|
|
fb_destroy_modedb(info->monspecs.modedb);
|
|
info->monspecs.modedb = NULL;
|
|
goto err_find_mode;
|
|
}
|
|
}
|
|
|
|
fb_destroy_modedb(info->monspecs.modedb);
|
|
info->monspecs.modedb = NULL;
|
|
|
|
/* maximize virtual vertical size for fast scrolling */
|
|
info->var.yres_virtual = info->fix.smem_len * 8 /
|
|
(info->var.bits_per_pixel * info->var.xres_virtual);
|
|
if (info->var.yres_virtual < info->var.yres) {
|
|
dev_err(info->device, "virtual vertical size smaller than real\n");
|
|
goto err_find_mode;
|
|
}
|
|
|
|
/* maximize virtual vertical size for fast scrolling */
|
|
info->var.yres_virtual = info->fix.smem_len * 8 /
|
|
(info->var.bits_per_pixel * info->var.xres_virtual);
|
|
if (info->var.yres_virtual < info->var.yres) {
|
|
dev_err(info->device, "virtual vertical size smaller than real\n");
|
|
goto err_find_mode;
|
|
}
|
|
|
|
rc = fb_alloc_cmap(&info->cmap, 256, 0);
|
|
if (rc < 0) {
|
|
dev_err(info->device, "cannot allocate colormap\n");
|
|
goto err_alloc_cmap;
|
|
}
|
|
|
|
rc = register_framebuffer(info);
|
|
if (rc < 0) {
|
|
dev_err(info->device, "cannot register framebuffer\n");
|
|
goto err_reg_fb;
|
|
}
|
|
|
|
printk(KERN_INFO "fb%d: %s on %s, %d MB RAM, %d MHz MCLK\n", info->node, info->fix.id,
|
|
pci_name(dev), info->fix.smem_len >> 20, (par->mclk_freq + 500) / 1000);
|
|
|
|
if (par->chip == CHIP_UNKNOWN)
|
|
printk(KERN_INFO "fb%d: unknown chip, CR2D=%x, CR2E=%x, CRT2F=%x, CRT30=%x\n",
|
|
info->node, vga_rcrt(par->state.vgabase, 0x2d), vga_rcrt(par->state.vgabase, 0x2e),
|
|
vga_rcrt(par->state.vgabase, 0x2f), vga_rcrt(par->state.vgabase, 0x30));
|
|
|
|
/* Record a reference to the driver data */
|
|
pci_set_drvdata(dev, info);
|
|
|
|
#ifdef CONFIG_MTRR
|
|
if (mtrr) {
|
|
par->mtrr_reg = -1;
|
|
par->mtrr_reg = mtrr_add(info->fix.smem_start, info->fix.smem_len, MTRR_TYPE_WRCOMB, 1);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
/* Error handling */
|
|
err_reg_fb:
|
|
fb_dealloc_cmap(&info->cmap);
|
|
err_alloc_cmap:
|
|
err_find_mode:
|
|
#ifdef CONFIG_FB_S3_DDC
|
|
if (par->ddc_registered)
|
|
i2c_del_adapter(&par->ddc_adapter);
|
|
if (par->mmio)
|
|
iounmap(par->mmio);
|
|
#endif
|
|
pci_iounmap(dev, info->screen_base);
|
|
err_iomap:
|
|
pci_release_regions(dev);
|
|
err_request_regions:
|
|
/* pci_disable_device(dev); */
|
|
err_enable_device:
|
|
framebuffer_release(info);
|
|
return rc;
|
|
}
|
|
|
|
|
|
/* PCI remove */
|
|
|
|
static void __devexit s3_pci_remove(struct pci_dev *dev)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(dev);
|
|
struct s3fb_info __maybe_unused *par = info->par;
|
|
|
|
if (info) {
|
|
|
|
#ifdef CONFIG_MTRR
|
|
if (par->mtrr_reg >= 0) {
|
|
mtrr_del(par->mtrr_reg, 0, 0);
|
|
par->mtrr_reg = -1;
|
|
}
|
|
#endif
|
|
|
|
unregister_framebuffer(info);
|
|
fb_dealloc_cmap(&info->cmap);
|
|
|
|
#ifdef CONFIG_FB_S3_DDC
|
|
if (par->ddc_registered)
|
|
i2c_del_adapter(&par->ddc_adapter);
|
|
if (par->mmio)
|
|
iounmap(par->mmio);
|
|
#endif
|
|
|
|
pci_iounmap(dev, info->screen_base);
|
|
pci_release_regions(dev);
|
|
/* pci_disable_device(dev); */
|
|
|
|
pci_set_drvdata(dev, NULL);
|
|
framebuffer_release(info);
|
|
}
|
|
}
|
|
|
|
/* PCI suspend */
|
|
|
|
static int s3_pci_suspend(struct pci_dev* dev, pm_message_t state)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(dev);
|
|
struct s3fb_info *par = info->par;
|
|
|
|
dev_info(info->device, "suspend\n");
|
|
|
|
console_lock();
|
|
mutex_lock(&(par->open_lock));
|
|
|
|
if ((state.event == PM_EVENT_FREEZE) || (par->ref_count == 0)) {
|
|
mutex_unlock(&(par->open_lock));
|
|
console_unlock();
|
|
return 0;
|
|
}
|
|
|
|
fb_set_suspend(info, 1);
|
|
|
|
pci_save_state(dev);
|
|
pci_disable_device(dev);
|
|
pci_set_power_state(dev, pci_choose_state(dev, state));
|
|
|
|
mutex_unlock(&(par->open_lock));
|
|
console_unlock();
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* PCI resume */
|
|
|
|
static int s3_pci_resume(struct pci_dev* dev)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(dev);
|
|
struct s3fb_info *par = info->par;
|
|
int err;
|
|
|
|
dev_info(info->device, "resume\n");
|
|
|
|
console_lock();
|
|
mutex_lock(&(par->open_lock));
|
|
|
|
if (par->ref_count == 0) {
|
|
mutex_unlock(&(par->open_lock));
|
|
console_unlock();
|
|
return 0;
|
|
}
|
|
|
|
pci_set_power_state(dev, PCI_D0);
|
|
pci_restore_state(dev);
|
|
err = pci_enable_device(dev);
|
|
if (err) {
|
|
mutex_unlock(&(par->open_lock));
|
|
console_unlock();
|
|
dev_err(info->device, "error %d enabling device for resume\n", err);
|
|
return err;
|
|
}
|
|
pci_set_master(dev);
|
|
|
|
s3fb_set_par(info);
|
|
fb_set_suspend(info, 0);
|
|
|
|
mutex_unlock(&(par->open_lock));
|
|
console_unlock();
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* List of boards that we are trying to support */
|
|
|
|
static struct pci_device_id s3_devices[] __devinitdata = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8810), .driver_data = CHIP_XXX_TRIO},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8811), .driver_data = CHIP_XXX_TRIO},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8812), .driver_data = CHIP_M65_AURORA64VP},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8814), .driver_data = CHIP_767_TRIO64UVP},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8901), .driver_data = CHIP_XXX_TRIO64V2_DXGX},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8902), .driver_data = CHIP_551_PLATO_PX},
|
|
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x5631), .driver_data = CHIP_325_VIRGE},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x883D), .driver_data = CHIP_988_VIRGE_VX},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A01), .driver_data = CHIP_XXX_VIRGE_DXGX},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A10), .driver_data = CHIP_357_VIRGE_GX2},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A11), .driver_data = CHIP_359_VIRGE_GX2P},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A12), .driver_data = CHIP_359_VIRGE_GX2P},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A13), .driver_data = CHIP_36X_TRIO3D_1X_2X},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8904), .driver_data = CHIP_365_TRIO3D},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8C01), .driver_data = CHIP_260_VIRGE_MX},
|
|
|
|
{0, 0, 0, 0, 0, 0, 0}
|
|
};
|
|
|
|
|
|
MODULE_DEVICE_TABLE(pci, s3_devices);
|
|
|
|
static struct pci_driver s3fb_pci_driver = {
|
|
.name = "s3fb",
|
|
.id_table = s3_devices,
|
|
.probe = s3_pci_probe,
|
|
.remove = __devexit_p(s3_pci_remove),
|
|
.suspend = s3_pci_suspend,
|
|
.resume = s3_pci_resume,
|
|
};
|
|
|
|
/* Parse user specified options */
|
|
|
|
#ifndef MODULE
|
|
static int __init s3fb_setup(char *options)
|
|
{
|
|
char *opt;
|
|
|
|
if (!options || !*options)
|
|
return 0;
|
|
|
|
while ((opt = strsep(&options, ",")) != NULL) {
|
|
|
|
if (!*opt)
|
|
continue;
|
|
#ifdef CONFIG_MTRR
|
|
else if (!strncmp(opt, "mtrr:", 5))
|
|
mtrr = simple_strtoul(opt + 5, NULL, 0);
|
|
#endif
|
|
else if (!strncmp(opt, "fasttext:", 9))
|
|
fasttext = simple_strtoul(opt + 9, NULL, 0);
|
|
else
|
|
mode_option = opt;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* Cleanup */
|
|
|
|
static void __exit s3fb_cleanup(void)
|
|
{
|
|
pr_debug("s3fb: cleaning up\n");
|
|
pci_unregister_driver(&s3fb_pci_driver);
|
|
}
|
|
|
|
/* Driver Initialisation */
|
|
|
|
static int __init s3fb_init(void)
|
|
{
|
|
|
|
#ifndef MODULE
|
|
char *option = NULL;
|
|
|
|
if (fb_get_options("s3fb", &option))
|
|
return -ENODEV;
|
|
s3fb_setup(option);
|
|
#endif
|
|
|
|
pr_debug("s3fb: initializing\n");
|
|
return pci_register_driver(&s3fb_pci_driver);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* Modularization */
|
|
|
|
module_init(s3fb_init);
|
|
module_exit(s3fb_cleanup);
|