mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 14:05:19 +08:00
1721badebf
[ Upstream commitca8fd8c16a] A user complained that the ftsteutates driver was displaying bogus values since its introduction. This happens because the sensor measurements need to be scaled in order to produce meaningful results: - the fan speed needs to be multiplied by 60 since its in RPS - the temperature is in degrees celsius and needs an offset of 64 - the voltage is in 1/256 of 3.3V The offical datasheet says the voltage needs to be divided by 256, but this is likely an off-by-one-error, since even the BIOS devides by 255 (otherwise 3.3V could not be measured). The voltage channels additionally need a board-specific multiplier, however this can be done by the driver since its board-specific. The reason the missing scaling of measurements is the way Fujitsu used this driver when it was still out-of-tree. Back then, all scaling was done in userspace by libsensors, even the generic one. Tested on a Fujitsu DS3401-B1. Fixes:08426eda58("hwmon: Add driver for FTS BMC chip "Teutates"") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20221224041855.83981-2-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
38 lines
1.2 KiB
ReStructuredText
38 lines
1.2 KiB
ReStructuredText
Kernel driver ftsteutates
|
|
=========================
|
|
|
|
Supported chips:
|
|
|
|
* FTS Teutates
|
|
|
|
Prefix: 'ftsteutates'
|
|
|
|
Addresses scanned: I2C 0x73 (7-Bit)
|
|
|
|
Author: Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
The BMC Teutates is the Eleventh generation of Superior System
|
|
monitoring and thermal management solution. It is builds on the basic
|
|
functionality of the BMC Theseus and contains several new features and
|
|
enhancements. It can monitor up to 4 voltages, 16 temperatures and
|
|
8 fans. It also contains an integrated watchdog which is currently
|
|
implemented in this driver.
|
|
|
|
The 4 voltages require a board-specific multiplier, since the BMC can
|
|
only measure voltages up to 3.3V and thus relies on voltage dividers.
|
|
Consult your motherboard manual for details.
|
|
|
|
To clear a temperature or fan alarm, execute the following command with the
|
|
correct path to the alarm file::
|
|
|
|
echo 0 >XXXX_alarm
|
|
|
|
Specification of the chip can be found here:
|
|
|
|
- ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf
|
|
- ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf
|