mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 03:24:55 +08:00
ff11d07803
A set of changes to the way termios settings are propagated to the serial port hardware. The DZ11 only supports a selection of fixed baud settings, so some requests may not be fulfilled. Keep the old setting in such a case and failing that resort to 9600bps. Also add a missing update of the transmit timeout. And remove the explicit encoding of the line selected from writes to the Line Parameters Register as it has been preencoded by the ->set_termios() call already. Finally, remove a duplicate macro for the Receiver Enable bit. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
130 lines
5.3 KiB
C
130 lines
5.3 KiB
C
/*
|
|
* dz.h: Serial port driver for DECstations equipped
|
|
* with the DZ chipset.
|
|
*
|
|
* Copyright (C) 1998 Olivier A. D. Lebaillif
|
|
*
|
|
* Email: olivier.lebaillif@ifrsys.com
|
|
*
|
|
* Copyright (C) 2004, 2006 Maciej W. Rozycki
|
|
*/
|
|
#ifndef DZ_SERIAL_H
|
|
#define DZ_SERIAL_H
|
|
|
|
/*
|
|
* Definitions for the Control and Status Register.
|
|
*/
|
|
#define DZ_TRDY 0x8000 /* Transmitter empty */
|
|
#define DZ_TIE 0x4000 /* Transmitter Interrupt Enbl */
|
|
#define DZ_TLINE 0x0300 /* Transmitter Line Number */
|
|
#define DZ_RDONE 0x0080 /* Receiver data ready */
|
|
#define DZ_RIE 0x0040 /* Receive Interrupt Enable */
|
|
#define DZ_MSE 0x0020 /* Master Scan Enable */
|
|
#define DZ_CLR 0x0010 /* Master reset */
|
|
#define DZ_MAINT 0x0008 /* Loop Back Mode */
|
|
|
|
/*
|
|
* Definitions for the Receiver Buffer Register.
|
|
*/
|
|
#define DZ_RBUF_MASK 0x00FF /* Data Mask */
|
|
#define DZ_LINE_MASK 0x0300 /* Line Mask */
|
|
#define DZ_DVAL 0x8000 /* Valid Data indicator */
|
|
#define DZ_OERR 0x4000 /* Overrun error indicator */
|
|
#define DZ_FERR 0x2000 /* Frame error indicator */
|
|
#define DZ_PERR 0x1000 /* Parity error indicator */
|
|
|
|
#define DZ_BREAK 0x0800 /* BREAK event software flag */
|
|
|
|
#define LINE(x) ((x & DZ_LINE_MASK) >> 8) /* Get the line number
|
|
from the input buffer */
|
|
#define UCHAR(x) ((unsigned char)(x & DZ_RBUF_MASK))
|
|
|
|
/*
|
|
* Definitions for the Transmit Control Register.
|
|
*/
|
|
#define DZ_LINE_KEYBOARD 0x0001
|
|
#define DZ_LINE_MOUSE 0x0002
|
|
#define DZ_LINE_MODEM 0x0004
|
|
#define DZ_LINE_PRINTER 0x0008
|
|
|
|
#define DZ_MODEM_RTS 0x0800 /* RTS for the modem line (2) */
|
|
#define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */
|
|
#define DZ_PRINT_RTS 0x0200 /* RTS for the prntr line (3) */
|
|
#define DZ_PRINT_DTR 0x0100 /* DTR for the prntr line (3) */
|
|
#define DZ_LNENB 0x000f /* Transmitter Line Enable */
|
|
|
|
/*
|
|
* Definitions for the Modem Status Register.
|
|
*/
|
|
#define DZ_MODEM_RI 0x0800 /* RI for the modem line (2) */
|
|
#define DZ_MODEM_CD 0x0400 /* CD for the modem line (2) */
|
|
#define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */
|
|
#define DZ_MODEM_CTS 0x0100 /* CTS for the modem line (2) */
|
|
#define DZ_PRINT_RI 0x0008 /* RI for the printer line (3) */
|
|
#define DZ_PRINT_CD 0x0004 /* CD for the printer line (3) */
|
|
#define DZ_PRINT_DSR 0x0002 /* DSR for the prntr line (3) */
|
|
#define DZ_PRINT_CTS 0x0001 /* CTS for the prntr line (3) */
|
|
|
|
/*
|
|
* Definitions for the Transmit Data Register.
|
|
*/
|
|
#define DZ_BRK0 0x0100 /* Break assertion for line 0 */
|
|
#define DZ_BRK1 0x0200 /* Break assertion for line 1 */
|
|
#define DZ_BRK2 0x0400 /* Break assertion for line 2 */
|
|
#define DZ_BRK3 0x0800 /* Break assertion for line 3 */
|
|
|
|
/*
|
|
* Definitions for the Line Parameter Register.
|
|
*/
|
|
#define DZ_KEYBOARD 0x0000 /* line 0 = keyboard */
|
|
#define DZ_MOUSE 0x0001 /* line 1 = mouse */
|
|
#define DZ_MODEM 0x0002 /* line 2 = modem */
|
|
#define DZ_PRINTER 0x0003 /* line 3 = printer */
|
|
|
|
#define DZ_CSIZE 0x0018 /* Number of bits per byte (mask) */
|
|
#define DZ_CS5 0x0000 /* 5 bits per byte */
|
|
#define DZ_CS6 0x0008 /* 6 bits per byte */
|
|
#define DZ_CS7 0x0010 /* 7 bits per byte */
|
|
#define DZ_CS8 0x0018 /* 8 bits per byte */
|
|
|
|
#define DZ_CSTOPB 0x0020 /* 2 stop bits instead of one */
|
|
|
|
#define DZ_PARENB 0x0040 /* Parity enable */
|
|
#define DZ_PARODD 0x0080 /* Odd parity instead of even */
|
|
|
|
#define DZ_CBAUD 0x0E00 /* Baud Rate (mask) */
|
|
#define DZ_B50 0x0000
|
|
#define DZ_B75 0x0100
|
|
#define DZ_B110 0x0200
|
|
#define DZ_B134 0x0300
|
|
#define DZ_B150 0x0400
|
|
#define DZ_B300 0x0500
|
|
#define DZ_B600 0x0600
|
|
#define DZ_B1200 0x0700
|
|
#define DZ_B1800 0x0800
|
|
#define DZ_B2000 0x0900
|
|
#define DZ_B2400 0x0A00
|
|
#define DZ_B3600 0x0B00
|
|
#define DZ_B4800 0x0C00
|
|
#define DZ_B7200 0x0D00
|
|
#define DZ_B9600 0x0E00
|
|
|
|
#define DZ_RXENAB 0x1000 /* Receiver Enable */
|
|
|
|
/*
|
|
* Addresses for the DZ registers
|
|
*/
|
|
#define DZ_CSR 0x00 /* Control and Status Register */
|
|
#define DZ_RBUF 0x08 /* Receive Buffer */
|
|
#define DZ_LPR 0x08 /* Line Parameters Register */
|
|
#define DZ_TCR 0x10 /* Transmitter Control Register */
|
|
#define DZ_MSR 0x18 /* Modem Status Register */
|
|
#define DZ_TDR 0x18 /* Transmit Data Register */
|
|
|
|
#define DZ_NB_PORT 4
|
|
|
|
#define DZ_XMIT_SIZE 4096 /* buffer size */
|
|
#define DZ_WAKEUP_CHARS DZ_XMIT_SIZE/4
|
|
|
|
#endif /* DZ_SERIAL_H */
|