mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
e2ca6ba6ba
- More userfaultfs work from Peter Xu. - Several convert-to-folios series from Sidhartha Kumar and Huang Ying. - Some filemap cleanups from Vishal Moola. - David Hildenbrand added the ability to selftest anon memory COW handling. - Some cpuset simplifications from Liu Shixin. - Addition of vmalloc tracing support by Uladzislau Rezki. - Some pagecache folioifications and simplifications from Matthew Wilcox. - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it. - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series shold have been in the non-MM tree, my bad. - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages. - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages. - Peter Xu utilized the PTE marker code for handling swapin errors. - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient. - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand. - zram support for multiple compression streams from Sergey Senozhatsky. - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway. - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations. - Vishal Moola removed the try_to_release_page() wrapper. - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache. - David Hildenbrand did some cleanup and repair work on KSM COW breaking. - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend. - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range(). - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen. - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect. - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages(). - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting. - David Hildenbrand has fixed some of our MM selftests for 32-bit machines. - Many singleton patches, as usual. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml CodAgiA51qwzId3GRytIo/tfWZSezgA= =d19R -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - More userfaultfs work from Peter Xu - Several convert-to-folios series from Sidhartha Kumar and Huang Ying - Some filemap cleanups from Vishal Moola - David Hildenbrand added the ability to selftest anon memory COW handling - Some cpuset simplifications from Liu Shixin - Addition of vmalloc tracing support by Uladzislau Rezki - Some pagecache folioifications and simplifications from Matthew Wilcox - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series should have been in the non-MM tree, my bad - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages - Peter Xu utilized the PTE marker code for handling swapin errors - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand - zram support for multiple compression streams from Sergey Senozhatsky - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations - Vishal Moola removed the try_to_release_page() wrapper - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache - David Hildenbrand did some cleanup and repair work on KSM COW breaking - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range() - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages() - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting - David Hildenbrand has fixed some of our MM selftests for 32-bit machines - Many singleton patches, as usual * tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits) mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio mm: mmu_gather: allow more than one batch of delayed rmaps mm: fix typo in struct pglist_data code comment kmsan: fix memcpy tests mm: add cond_resched() in swapin_walk_pmd_entry() mm: do not show fs mm pc for VM_LOCKONFAULT pages selftests/vm: ksm_functional_tests: fixes for 32bit selftests/vm: cow: fix compile warning on 32bit selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem mm,thp,rmap: fix races between updates of subpages_mapcount mm: memcg: fix swapcached stat accounting mm: add nodes= arg to memory.reclaim mm: disable top-tier fallback to reclaim on proactive reclaim selftests: cgroup: make sure reclaim target memcg is unprotected selftests: cgroup: refactor proactive reclaim code to reclaim_until() mm: memcg: fix stale protection of reclaim target memcg mm/mmap: properly unaccount memory on mas_preallocate() failure omfs: remove ->writepage jfs: remove ->writepage ...
2258 lines
94 KiB
ReStructuredText
2258 lines
94 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
====================
|
|
The /proc Filesystem
|
|
====================
|
|
|
|
===================== ======================================= ================
|
|
/proc/sys Terrehon Bowden <terrehon@pacbell.net>, October 7 1999
|
|
Bodo Bauer <bb@ricochet.net>
|
|
2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000
|
|
move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009
|
|
fixes/update part 1.1 Stefani Seibold <stefani@seibold.net> June 9 2009
|
|
===================== ======================================= ================
|
|
|
|
|
|
|
|
.. Table of Contents
|
|
|
|
0 Preface
|
|
0.1 Introduction/Credits
|
|
0.2 Legal Stuff
|
|
|
|
1 Collecting System Information
|
|
1.1 Process-Specific Subdirectories
|
|
1.2 Kernel data
|
|
1.3 IDE devices in /proc/ide
|
|
1.4 Networking info in /proc/net
|
|
1.5 SCSI info
|
|
1.6 Parallel port info in /proc/parport
|
|
1.7 TTY info in /proc/tty
|
|
1.8 Miscellaneous kernel statistics in /proc/stat
|
|
1.9 Ext4 file system parameters
|
|
|
|
2 Modifying System Parameters
|
|
|
|
3 Per-Process Parameters
|
|
3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
|
|
score
|
|
3.2 /proc/<pid>/oom_score - Display current oom-killer score
|
|
3.3 /proc/<pid>/io - Display the IO accounting fields
|
|
3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
|
|
3.5 /proc/<pid>/mountinfo - Information about mounts
|
|
3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
|
|
3.7 /proc/<pid>/task/<tid>/children - Information about task children
|
|
3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
|
|
3.9 /proc/<pid>/map_files - Information about memory mapped files
|
|
3.10 /proc/<pid>/timerslack_ns - Task timerslack value
|
|
3.11 /proc/<pid>/patch_state - Livepatch patch operation state
|
|
3.12 /proc/<pid>/arch_status - Task architecture specific information
|
|
3.13 /proc/<pid>/fd - List of symlinks to open files
|
|
|
|
4 Configuring procfs
|
|
4.1 Mount options
|
|
|
|
5 Filesystem behavior
|
|
|
|
Preface
|
|
=======
|
|
|
|
0.1 Introduction/Credits
|
|
------------------------
|
|
|
|
This documentation is part of a soon (or so we hope) to be released book on
|
|
the SuSE Linux distribution. As there is no complete documentation for the
|
|
/proc file system and we've used many freely available sources to write these
|
|
chapters, it seems only fair to give the work back to the Linux community.
|
|
This work is based on the 2.2.* kernel version and the upcoming 2.4.*. I'm
|
|
afraid it's still far from complete, but we hope it will be useful. As far as
|
|
we know, it is the first 'all-in-one' document about the /proc file system. It
|
|
is focused on the Intel x86 hardware, so if you are looking for PPC, ARM,
|
|
SPARC, AXP, etc., features, you probably won't find what you are looking for.
|
|
It also only covers IPv4 networking, not IPv6 nor other protocols - sorry. But
|
|
additions and patches are welcome and will be added to this document if you
|
|
mail them to Bodo.
|
|
|
|
We'd like to thank Alan Cox, Rik van Riel, and Alexey Kuznetsov and a lot of
|
|
other people for help compiling this documentation. We'd also like to extend a
|
|
special thank you to Andi Kleen for documentation, which we relied on heavily
|
|
to create this document, as well as the additional information he provided.
|
|
Thanks to everybody else who contributed source or docs to the Linux kernel
|
|
and helped create a great piece of software... :)
|
|
|
|
If you have any comments, corrections or additions, please don't hesitate to
|
|
contact Bodo Bauer at bb@ricochet.net. We'll be happy to add them to this
|
|
document.
|
|
|
|
The latest version of this document is available online at
|
|
http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/proc.html
|
|
|
|
If the above direction does not works for you, you could try the kernel
|
|
mailing list at linux-kernel@vger.kernel.org and/or try to reach me at
|
|
comandante@zaralinux.com.
|
|
|
|
0.2 Legal Stuff
|
|
---------------
|
|
|
|
We don't guarantee the correctness of this document, and if you come to us
|
|
complaining about how you screwed up your system because of incorrect
|
|
documentation, we won't feel responsible...
|
|
|
|
Chapter 1: Collecting System Information
|
|
========================================
|
|
|
|
In This Chapter
|
|
---------------
|
|
* Investigating the properties of the pseudo file system /proc and its
|
|
ability to provide information on the running Linux system
|
|
* Examining /proc's structure
|
|
* Uncovering various information about the kernel and the processes running
|
|
on the system
|
|
|
|
------------------------------------------------------------------------------
|
|
|
|
The proc file system acts as an interface to internal data structures in the
|
|
kernel. It can be used to obtain information about the system and to change
|
|
certain kernel parameters at runtime (sysctl).
|
|
|
|
First, we'll take a look at the read-only parts of /proc. In Chapter 2, we
|
|
show you how you can use /proc/sys to change settings.
|
|
|
|
1.1 Process-Specific Subdirectories
|
|
-----------------------------------
|
|
|
|
The directory /proc contains (among other things) one subdirectory for each
|
|
process running on the system, which is named after the process ID (PID).
|
|
|
|
The link 'self' points to the process reading the file system. Each process
|
|
subdirectory has the entries listed in Table 1-1.
|
|
|
|
Note that an open file descriptor to /proc/<pid> or to any of its
|
|
contained files or subdirectories does not prevent <pid> being reused
|
|
for some other process in the event that <pid> exits. Operations on
|
|
open /proc/<pid> file descriptors corresponding to dead processes
|
|
never act on any new process that the kernel may, through chance, have
|
|
also assigned the process ID <pid>. Instead, operations on these FDs
|
|
usually fail with ESRCH.
|
|
|
|
.. table:: Table 1-1: Process specific entries in /proc
|
|
|
|
============= ===============================================================
|
|
File Content
|
|
============= ===============================================================
|
|
clear_refs Clears page referenced bits shown in smaps output
|
|
cmdline Command line arguments
|
|
cpu Current and last cpu in which it was executed (2.4)(smp)
|
|
cwd Link to the current working directory
|
|
environ Values of environment variables
|
|
exe Link to the executable of this process
|
|
fd Directory, which contains all file descriptors
|
|
maps Memory maps to executables and library files (2.4)
|
|
mem Memory held by this process
|
|
root Link to the root directory of this process
|
|
stat Process status
|
|
statm Process memory status information
|
|
status Process status in human readable form
|
|
wchan Present with CONFIG_KALLSYMS=y: it shows the kernel function
|
|
symbol the task is blocked in - or "0" if not blocked.
|
|
pagemap Page table
|
|
stack Report full stack trace, enable via CONFIG_STACKTRACE
|
|
smaps An extension based on maps, showing the memory consumption of
|
|
each mapping and flags associated with it
|
|
smaps_rollup Accumulated smaps stats for all mappings of the process. This
|
|
can be derived from smaps, but is faster and more convenient
|
|
numa_maps An extension based on maps, showing the memory locality and
|
|
binding policy as well as mem usage (in pages) of each mapping.
|
|
============= ===============================================================
|
|
|
|
For example, to get the status information of a process, all you have to do is
|
|
read the file /proc/PID/status::
|
|
|
|
>cat /proc/self/status
|
|
Name: cat
|
|
State: R (running)
|
|
Tgid: 5452
|
|
Pid: 5452
|
|
PPid: 743
|
|
TracerPid: 0 (2.4)
|
|
Uid: 501 501 501 501
|
|
Gid: 100 100 100 100
|
|
FDSize: 256
|
|
Groups: 100 14 16
|
|
VmPeak: 5004 kB
|
|
VmSize: 5004 kB
|
|
VmLck: 0 kB
|
|
VmHWM: 476 kB
|
|
VmRSS: 476 kB
|
|
RssAnon: 352 kB
|
|
RssFile: 120 kB
|
|
RssShmem: 4 kB
|
|
VmData: 156 kB
|
|
VmStk: 88 kB
|
|
VmExe: 68 kB
|
|
VmLib: 1412 kB
|
|
VmPTE: 20 kb
|
|
VmSwap: 0 kB
|
|
HugetlbPages: 0 kB
|
|
CoreDumping: 0
|
|
THP_enabled: 1
|
|
Threads: 1
|
|
SigQ: 0/28578
|
|
SigPnd: 0000000000000000
|
|
ShdPnd: 0000000000000000
|
|
SigBlk: 0000000000000000
|
|
SigIgn: 0000000000000000
|
|
SigCgt: 0000000000000000
|
|
CapInh: 00000000fffffeff
|
|
CapPrm: 0000000000000000
|
|
CapEff: 0000000000000000
|
|
CapBnd: ffffffffffffffff
|
|
CapAmb: 0000000000000000
|
|
NoNewPrivs: 0
|
|
Seccomp: 0
|
|
Speculation_Store_Bypass: thread vulnerable
|
|
SpeculationIndirectBranch: conditional enabled
|
|
voluntary_ctxt_switches: 0
|
|
nonvoluntary_ctxt_switches: 1
|
|
|
|
This shows you nearly the same information you would get if you viewed it with
|
|
the ps command. In fact, ps uses the proc file system to obtain its
|
|
information. But you get a more detailed view of the process by reading the
|
|
file /proc/PID/status. It fields are described in table 1-2.
|
|
|
|
The statm file contains more detailed information about the process
|
|
memory usage. Its seven fields are explained in Table 1-3. The stat file
|
|
contains detailed information about the process itself. Its fields are
|
|
explained in Table 1-4.
|
|
|
|
(for SMP CONFIG users)
|
|
|
|
For making accounting scalable, RSS related information are handled in an
|
|
asynchronous manner and the value may not be very precise. To see a precise
|
|
snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
|
|
It's slow but very precise.
|
|
|
|
.. table:: Table 1-2: Contents of the status files (as of 4.19)
|
|
|
|
========================== ===================================================
|
|
Field Content
|
|
========================== ===================================================
|
|
Name filename of the executable
|
|
Umask file mode creation mask
|
|
State state (R is running, S is sleeping, D is sleeping
|
|
in an uninterruptible wait, Z is zombie,
|
|
T is traced or stopped)
|
|
Tgid thread group ID
|
|
Ngid NUMA group ID (0 if none)
|
|
Pid process id
|
|
PPid process id of the parent process
|
|
TracerPid PID of process tracing this process (0 if not, or
|
|
the tracer is outside of the current pid namespace)
|
|
Uid Real, effective, saved set, and file system UIDs
|
|
Gid Real, effective, saved set, and file system GIDs
|
|
FDSize number of file descriptor slots currently allocated
|
|
Groups supplementary group list
|
|
NStgid descendant namespace thread group ID hierarchy
|
|
NSpid descendant namespace process ID hierarchy
|
|
NSpgid descendant namespace process group ID hierarchy
|
|
NSsid descendant namespace session ID hierarchy
|
|
VmPeak peak virtual memory size
|
|
VmSize total program size
|
|
VmLck locked memory size
|
|
VmPin pinned memory size
|
|
VmHWM peak resident set size ("high water mark")
|
|
VmRSS size of memory portions. It contains the three
|
|
following parts
|
|
(VmRSS = RssAnon + RssFile + RssShmem)
|
|
RssAnon size of resident anonymous memory
|
|
RssFile size of resident file mappings
|
|
RssShmem size of resident shmem memory (includes SysV shm,
|
|
mapping of tmpfs and shared anonymous mappings)
|
|
VmData size of private data segments
|
|
VmStk size of stack segments
|
|
VmExe size of text segment
|
|
VmLib size of shared library code
|
|
VmPTE size of page table entries
|
|
VmSwap amount of swap used by anonymous private data
|
|
(shmem swap usage is not included)
|
|
HugetlbPages size of hugetlb memory portions
|
|
CoreDumping process's memory is currently being dumped
|
|
(killing the process may lead to a corrupted core)
|
|
THP_enabled process is allowed to use THP (returns 0 when
|
|
PR_SET_THP_DISABLE is set on the process
|
|
Threads number of threads
|
|
SigQ number of signals queued/max. number for queue
|
|
SigPnd bitmap of pending signals for the thread
|
|
ShdPnd bitmap of shared pending signals for the process
|
|
SigBlk bitmap of blocked signals
|
|
SigIgn bitmap of ignored signals
|
|
SigCgt bitmap of caught signals
|
|
CapInh bitmap of inheritable capabilities
|
|
CapPrm bitmap of permitted capabilities
|
|
CapEff bitmap of effective capabilities
|
|
CapBnd bitmap of capabilities bounding set
|
|
CapAmb bitmap of ambient capabilities
|
|
NoNewPrivs no_new_privs, like prctl(PR_GET_NO_NEW_PRIV, ...)
|
|
Seccomp seccomp mode, like prctl(PR_GET_SECCOMP, ...)
|
|
Speculation_Store_Bypass speculative store bypass mitigation status
|
|
SpeculationIndirectBranch indirect branch speculation mode
|
|
Cpus_allowed mask of CPUs on which this process may run
|
|
Cpus_allowed_list Same as previous, but in "list format"
|
|
Mems_allowed mask of memory nodes allowed to this process
|
|
Mems_allowed_list Same as previous, but in "list format"
|
|
voluntary_ctxt_switches number of voluntary context switches
|
|
nonvoluntary_ctxt_switches number of non voluntary context switches
|
|
========================== ===================================================
|
|
|
|
|
|
.. table:: Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
|
|
|
|
======== =============================== ==============================
|
|
Field Content
|
|
======== =============================== ==============================
|
|
size total program size (pages) (same as VmSize in status)
|
|
resident size of memory portions (pages) (same as VmRSS in status)
|
|
shared number of pages that are shared (i.e. backed by a file, same
|
|
as RssFile+RssShmem in status)
|
|
trs number of pages that are 'code' (not including libs; broken,
|
|
includes data segment)
|
|
lrs number of pages of library (always 0 on 2.6)
|
|
drs number of pages of data/stack (including libs; broken,
|
|
includes library text)
|
|
dt number of dirty pages (always 0 on 2.6)
|
|
======== =============================== ==============================
|
|
|
|
|
|
.. table:: Table 1-4: Contents of the stat files (as of 2.6.30-rc7)
|
|
|
|
============= ===============================================================
|
|
Field Content
|
|
============= ===============================================================
|
|
pid process id
|
|
tcomm filename of the executable
|
|
state state (R is running, S is sleeping, D is sleeping in an
|
|
uninterruptible wait, Z is zombie, T is traced or stopped)
|
|
ppid process id of the parent process
|
|
pgrp pgrp of the process
|
|
sid session id
|
|
tty_nr tty the process uses
|
|
tty_pgrp pgrp of the tty
|
|
flags task flags
|
|
min_flt number of minor faults
|
|
cmin_flt number of minor faults with child's
|
|
maj_flt number of major faults
|
|
cmaj_flt number of major faults with child's
|
|
utime user mode jiffies
|
|
stime kernel mode jiffies
|
|
cutime user mode jiffies with child's
|
|
cstime kernel mode jiffies with child's
|
|
priority priority level
|
|
nice nice level
|
|
num_threads number of threads
|
|
it_real_value (obsolete, always 0)
|
|
start_time time the process started after system boot
|
|
vsize virtual memory size
|
|
rss resident set memory size
|
|
rsslim current limit in bytes on the rss
|
|
start_code address above which program text can run
|
|
end_code address below which program text can run
|
|
start_stack address of the start of the main process stack
|
|
esp current value of ESP
|
|
eip current value of EIP
|
|
pending bitmap of pending signals
|
|
blocked bitmap of blocked signals
|
|
sigign bitmap of ignored signals
|
|
sigcatch bitmap of caught signals
|
|
0 (place holder, used to be the wchan address,
|
|
use /proc/PID/wchan instead)
|
|
0 (place holder)
|
|
0 (place holder)
|
|
exit_signal signal to send to parent thread on exit
|
|
task_cpu which CPU the task is scheduled on
|
|
rt_priority realtime priority
|
|
policy scheduling policy (man sched_setscheduler)
|
|
blkio_ticks time spent waiting for block IO
|
|
gtime guest time of the task in jiffies
|
|
cgtime guest time of the task children in jiffies
|
|
start_data address above which program data+bss is placed
|
|
end_data address below which program data+bss is placed
|
|
start_brk address above which program heap can be expanded with brk()
|
|
arg_start address above which program command line is placed
|
|
arg_end address below which program command line is placed
|
|
env_start address above which program environment is placed
|
|
env_end address below which program environment is placed
|
|
exit_code the thread's exit_code in the form reported by the waitpid
|
|
system call
|
|
============= ===============================================================
|
|
|
|
The /proc/PID/maps file contains the currently mapped memory regions and
|
|
their access permissions.
|
|
|
|
The format is::
|
|
|
|
address perms offset dev inode pathname
|
|
|
|
08048000-08049000 r-xp 00000000 03:00 8312 /opt/test
|
|
08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
|
|
0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
|
|
a7cb1000-a7cb2000 ---p 00000000 00:00 0
|
|
a7cb2000-a7eb2000 rw-p 00000000 00:00 0
|
|
a7eb2000-a7eb3000 ---p 00000000 00:00 0
|
|
a7eb3000-a7ed5000 rw-p 00000000 00:00 0
|
|
a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
|
|
a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6
|
|
a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6
|
|
a800b000-a800e000 rw-p 00000000 00:00 0
|
|
a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0
|
|
a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0
|
|
a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0
|
|
a8024000-a8027000 rw-p 00000000 00:00 0
|
|
a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2
|
|
a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2
|
|
a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2
|
|
aff35000-aff4a000 rw-p 00000000 00:00 0 [stack]
|
|
ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
|
|
|
|
where "address" is the address space in the process that it occupies, "perms"
|
|
is a set of permissions::
|
|
|
|
r = read
|
|
w = write
|
|
x = execute
|
|
s = shared
|
|
p = private (copy on write)
|
|
|
|
"offset" is the offset into the mapping, "dev" is the device (major:minor), and
|
|
"inode" is the inode on that device. 0 indicates that no inode is associated
|
|
with the memory region, as the case would be with BSS (uninitialized data).
|
|
The "pathname" shows the name associated file for this mapping. If the mapping
|
|
is not associated with a file:
|
|
|
|
=================== ===========================================
|
|
[heap] the heap of the program
|
|
[stack] the stack of the main process
|
|
[vdso] the "virtual dynamic shared object",
|
|
the kernel system call handler
|
|
[anon:<name>] a private anonymous mapping that has been
|
|
named by userspace
|
|
[anon_shmem:<name>] an anonymous shared memory mapping that has
|
|
been named by userspace
|
|
=================== ===========================================
|
|
|
|
or if empty, the mapping is anonymous.
|
|
|
|
The /proc/PID/smaps is an extension based on maps, showing the memory
|
|
consumption for each of the process's mappings. For each mapping (aka Virtual
|
|
Memory Area, or VMA) there is a series of lines such as the following::
|
|
|
|
08048000-080bc000 r-xp 00000000 03:02 13130 /bin/bash
|
|
|
|
Size: 1084 kB
|
|
KernelPageSize: 4 kB
|
|
MMUPageSize: 4 kB
|
|
Rss: 892 kB
|
|
Pss: 374 kB
|
|
Pss_Dirty: 0 kB
|
|
Shared_Clean: 892 kB
|
|
Shared_Dirty: 0 kB
|
|
Private_Clean: 0 kB
|
|
Private_Dirty: 0 kB
|
|
Referenced: 892 kB
|
|
Anonymous: 0 kB
|
|
LazyFree: 0 kB
|
|
AnonHugePages: 0 kB
|
|
ShmemPmdMapped: 0 kB
|
|
Shared_Hugetlb: 0 kB
|
|
Private_Hugetlb: 0 kB
|
|
Swap: 0 kB
|
|
SwapPss: 0 kB
|
|
KernelPageSize: 4 kB
|
|
MMUPageSize: 4 kB
|
|
Locked: 0 kB
|
|
THPeligible: 0
|
|
VmFlags: rd ex mr mw me dw
|
|
|
|
The first of these lines shows the same information as is displayed for the
|
|
mapping in /proc/PID/maps. Following lines show the size of the mapping
|
|
(size); the size of each page allocated when backing a VMA (KernelPageSize),
|
|
which is usually the same as the size in the page table entries; the page size
|
|
used by the MMU when backing a VMA (in most cases, the same as KernelPageSize);
|
|
the amount of the mapping that is currently resident in RAM (RSS); the
|
|
process' proportional share of this mapping (PSS); and the number of clean and
|
|
dirty shared and private pages in the mapping.
|
|
|
|
The "proportional set size" (PSS) of a process is the count of pages it has
|
|
in memory, where each page is divided by the number of processes sharing it.
|
|
So if a process has 1000 pages all to itself, and 1000 shared with one other
|
|
process, its PSS will be 1500. "Pss_Dirty" is the portion of PSS which
|
|
consists of dirty pages. ("Pss_Clean" is not included, but it can be
|
|
calculated by subtracting "Pss_Dirty" from "Pss".)
|
|
|
|
Note that even a page which is part of a MAP_SHARED mapping, but has only
|
|
a single pte mapped, i.e. is currently used by only one process, is accounted
|
|
as private and not as shared.
|
|
|
|
"Referenced" indicates the amount of memory currently marked as referenced or
|
|
accessed.
|
|
|
|
"Anonymous" shows the amount of memory that does not belong to any file. Even
|
|
a mapping associated with a file may contain anonymous pages: when MAP_PRIVATE
|
|
and a page is modified, the file page is replaced by a private anonymous copy.
|
|
|
|
"LazyFree" shows the amount of memory which is marked by madvise(MADV_FREE).
|
|
The memory isn't freed immediately with madvise(). It's freed in memory
|
|
pressure if the memory is clean. Please note that the printed value might
|
|
be lower than the real value due to optimizations used in the current
|
|
implementation. If this is not desirable please file a bug report.
|
|
|
|
"AnonHugePages" shows the ammount of memory backed by transparent hugepage.
|
|
|
|
"ShmemPmdMapped" shows the ammount of shared (shmem/tmpfs) memory backed by
|
|
huge pages.
|
|
|
|
"Shared_Hugetlb" and "Private_Hugetlb" show the ammounts of memory backed by
|
|
hugetlbfs page which is *not* counted in "RSS" or "PSS" field for historical
|
|
reasons. And these are not included in {Shared,Private}_{Clean,Dirty} field.
|
|
|
|
"Swap" shows how much would-be-anonymous memory is also used, but out on swap.
|
|
|
|
For shmem mappings, "Swap" includes also the size of the mapped (and not
|
|
replaced by copy-on-write) part of the underlying shmem object out on swap.
|
|
"SwapPss" shows proportional swap share of this mapping. Unlike "Swap", this
|
|
does not take into account swapped out page of underlying shmem objects.
|
|
"Locked" indicates whether the mapping is locked in memory or not.
|
|
|
|
"THPeligible" indicates whether the mapping is eligible for allocating THP
|
|
pages as well as the THP is PMD mappable or not - 1 if true, 0 otherwise.
|
|
It just shows the current status.
|
|
|
|
"VmFlags" field deserves a separate description. This member represents the
|
|
kernel flags associated with the particular virtual memory area in two letter
|
|
encoded manner. The codes are the following:
|
|
|
|
== =======================================
|
|
rd readable
|
|
wr writeable
|
|
ex executable
|
|
sh shared
|
|
mr may read
|
|
mw may write
|
|
me may execute
|
|
ms may share
|
|
gd stack segment growns down
|
|
pf pure PFN range
|
|
dw disabled write to the mapped file
|
|
lo pages are locked in memory
|
|
io memory mapped I/O area
|
|
sr sequential read advise provided
|
|
rr random read advise provided
|
|
dc do not copy area on fork
|
|
de do not expand area on remapping
|
|
ac area is accountable
|
|
nr swap space is not reserved for the area
|
|
ht area uses huge tlb pages
|
|
sf synchronous page fault
|
|
ar architecture specific flag
|
|
wf wipe on fork
|
|
dd do not include area into core dump
|
|
sd soft dirty flag
|
|
mm mixed map area
|
|
hg huge page advise flag
|
|
nh no huge page advise flag
|
|
mg mergable advise flag
|
|
bt arm64 BTI guarded page
|
|
mt arm64 MTE allocation tags are enabled
|
|
um userfaultfd missing tracking
|
|
uw userfaultfd wr-protect tracking
|
|
== =======================================
|
|
|
|
Note that there is no guarantee that every flag and associated mnemonic will
|
|
be present in all further kernel releases. Things get changed, the flags may
|
|
be vanished or the reverse -- new added. Interpretation of their meaning
|
|
might change in future as well. So each consumer of these flags has to
|
|
follow each specific kernel version for the exact semantic.
|
|
|
|
This file is only present if the CONFIG_MMU kernel configuration option is
|
|
enabled.
|
|
|
|
Note: reading /proc/PID/maps or /proc/PID/smaps is inherently racy (consistent
|
|
output can be achieved only in the single read call).
|
|
|
|
This typically manifests when doing partial reads of these files while the
|
|
memory map is being modified. Despite the races, we do provide the following
|
|
guarantees:
|
|
|
|
1) The mapped addresses never go backwards, which implies no two
|
|
regions will ever overlap.
|
|
2) If there is something at a given vaddr during the entirety of the
|
|
life of the smaps/maps walk, there will be some output for it.
|
|
|
|
The /proc/PID/smaps_rollup file includes the same fields as /proc/PID/smaps,
|
|
but their values are the sums of the corresponding values for all mappings of
|
|
the process. Additionally, it contains these fields:
|
|
|
|
- Pss_Anon
|
|
- Pss_File
|
|
- Pss_Shmem
|
|
|
|
They represent the proportional shares of anonymous, file, and shmem pages, as
|
|
described for smaps above. These fields are omitted in smaps since each
|
|
mapping identifies the type (anon, file, or shmem) of all pages it contains.
|
|
Thus all information in smaps_rollup can be derived from smaps, but at a
|
|
significantly higher cost.
|
|
|
|
The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG
|
|
bits on both physical and virtual pages associated with a process, and the
|
|
soft-dirty bit on pte (see Documentation/admin-guide/mm/soft-dirty.rst
|
|
for details).
|
|
To clear the bits for all the pages associated with the process::
|
|
|
|
> echo 1 > /proc/PID/clear_refs
|
|
|
|
To clear the bits for the anonymous pages associated with the process::
|
|
|
|
> echo 2 > /proc/PID/clear_refs
|
|
|
|
To clear the bits for the file mapped pages associated with the process::
|
|
|
|
> echo 3 > /proc/PID/clear_refs
|
|
|
|
To clear the soft-dirty bit::
|
|
|
|
> echo 4 > /proc/PID/clear_refs
|
|
|
|
To reset the peak resident set size ("high water mark") to the process's
|
|
current value::
|
|
|
|
> echo 5 > /proc/PID/clear_refs
|
|
|
|
Any other value written to /proc/PID/clear_refs will have no effect.
|
|
|
|
The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags
|
|
using /proc/kpageflags and number of times a page is mapped using
|
|
/proc/kpagecount. For detailed explanation, see
|
|
Documentation/admin-guide/mm/pagemap.rst.
|
|
|
|
The /proc/pid/numa_maps is an extension based on maps, showing the memory
|
|
locality and binding policy, as well as the memory usage (in pages) of
|
|
each mapping. The output follows a general format where mapping details get
|
|
summarized separated by blank spaces, one mapping per each file line::
|
|
|
|
address policy mapping details
|
|
|
|
00400000 default file=/usr/local/bin/app mapped=1 active=0 N3=1 kernelpagesize_kB=4
|
|
00600000 default file=/usr/local/bin/app anon=1 dirty=1 N3=1 kernelpagesize_kB=4
|
|
3206000000 default file=/lib64/ld-2.12.so mapped=26 mapmax=6 N0=24 N3=2 kernelpagesize_kB=4
|
|
320621f000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
|
|
3206220000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
|
|
3206221000 default anon=1 dirty=1 N3=1 kernelpagesize_kB=4
|
|
3206800000 default file=/lib64/libc-2.12.so mapped=59 mapmax=21 active=55 N0=41 N3=18 kernelpagesize_kB=4
|
|
320698b000 default file=/lib64/libc-2.12.so
|
|
3206b8a000 default file=/lib64/libc-2.12.so anon=2 dirty=2 N3=2 kernelpagesize_kB=4
|
|
3206b8e000 default file=/lib64/libc-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
|
|
3206b8f000 default anon=3 dirty=3 active=1 N3=3 kernelpagesize_kB=4
|
|
7f4dc10a2000 default anon=3 dirty=3 N3=3 kernelpagesize_kB=4
|
|
7f4dc10b4000 default anon=2 dirty=2 active=1 N3=2 kernelpagesize_kB=4
|
|
7f4dc1200000 default file=/anon_hugepage\040(deleted) huge anon=1 dirty=1 N3=1 kernelpagesize_kB=2048
|
|
7fff335f0000 default stack anon=3 dirty=3 N3=3 kernelpagesize_kB=4
|
|
7fff3369d000 default mapped=1 mapmax=35 active=0 N3=1 kernelpagesize_kB=4
|
|
|
|
Where:
|
|
|
|
"address" is the starting address for the mapping;
|
|
|
|
"policy" reports the NUMA memory policy set for the mapping (see Documentation/admin-guide/mm/numa_memory_policy.rst);
|
|
|
|
"mapping details" summarizes mapping data such as mapping type, page usage counters,
|
|
node locality page counters (N0 == node0, N1 == node1, ...) and the kernel page
|
|
size, in KB, that is backing the mapping up.
|
|
|
|
1.2 Kernel data
|
|
---------------
|
|
|
|
Similar to the process entries, the kernel data files give information about
|
|
the running kernel. The files used to obtain this information are contained in
|
|
/proc and are listed in Table 1-5. Not all of these will be present in your
|
|
system. It depends on the kernel configuration and the loaded modules, which
|
|
files are there, and which are missing.
|
|
|
|
.. table:: Table 1-5: Kernel info in /proc
|
|
|
|
============ ===============================================================
|
|
File Content
|
|
============ ===============================================================
|
|
apm Advanced power management info
|
|
buddyinfo Kernel memory allocator information (see text) (2.5)
|
|
bus Directory containing bus specific information
|
|
cmdline Kernel command line
|
|
cpuinfo Info about the CPU
|
|
devices Available devices (block and character)
|
|
dma Used DMS channels
|
|
filesystems Supported filesystems
|
|
driver Various drivers grouped here, currently rtc (2.4)
|
|
execdomains Execdomains, related to security (2.4)
|
|
fb Frame Buffer devices (2.4)
|
|
fs File system parameters, currently nfs/exports (2.4)
|
|
ide Directory containing info about the IDE subsystem
|
|
interrupts Interrupt usage
|
|
iomem Memory map (2.4)
|
|
ioports I/O port usage
|
|
irq Masks for irq to cpu affinity (2.4)(smp?)
|
|
isapnp ISA PnP (Plug&Play) Info (2.4)
|
|
kcore Kernel core image (can be ELF or A.OUT(deprecated in 2.4))
|
|
kmsg Kernel messages
|
|
ksyms Kernel symbol table
|
|
loadavg Load average of last 1, 5 & 15 minutes;
|
|
number of processes currently runnable (running or on ready queue);
|
|
total number of processes in system;
|
|
last pid created.
|
|
All fields are separated by one space except "number of
|
|
processes currently runnable" and "total number of processes
|
|
in system", which are separated by a slash ('/'). Example:
|
|
0.61 0.61 0.55 3/828 22084
|
|
locks Kernel locks
|
|
meminfo Memory info
|
|
misc Miscellaneous
|
|
modules List of loaded modules
|
|
mounts Mounted filesystems
|
|
net Networking info (see text)
|
|
pagetypeinfo Additional page allocator information (see text) (2.5)
|
|
partitions Table of partitions known to the system
|
|
pci Deprecated info of PCI bus (new way -> /proc/bus/pci/,
|
|
decoupled by lspci (2.4)
|
|
rtc Real time clock
|
|
scsi SCSI info (see text)
|
|
slabinfo Slab pool info
|
|
softirqs softirq usage
|
|
stat Overall statistics
|
|
swaps Swap space utilization
|
|
sys See chapter 2
|
|
sysvipc Info of SysVIPC Resources (msg, sem, shm) (2.4)
|
|
tty Info of tty drivers
|
|
uptime Wall clock since boot, combined idle time of all cpus
|
|
version Kernel version
|
|
video bttv info of video resources (2.4)
|
|
vmallocinfo Show vmalloced areas
|
|
============ ===============================================================
|
|
|
|
You can, for example, check which interrupts are currently in use and what
|
|
they are used for by looking in the file /proc/interrupts::
|
|
|
|
> cat /proc/interrupts
|
|
CPU0
|
|
0: 8728810 XT-PIC timer
|
|
1: 895 XT-PIC keyboard
|
|
2: 0 XT-PIC cascade
|
|
3: 531695 XT-PIC aha152x
|
|
4: 2014133 XT-PIC serial
|
|
5: 44401 XT-PIC pcnet_cs
|
|
8: 2 XT-PIC rtc
|
|
11: 8 XT-PIC i82365
|
|
12: 182918 XT-PIC PS/2 Mouse
|
|
13: 1 XT-PIC fpu
|
|
14: 1232265 XT-PIC ide0
|
|
15: 7 XT-PIC ide1
|
|
NMI: 0
|
|
|
|
In 2.4.* a couple of lines where added to this file LOC & ERR (this time is the
|
|
output of a SMP machine)::
|
|
|
|
> cat /proc/interrupts
|
|
|
|
CPU0 CPU1
|
|
0: 1243498 1214548 IO-APIC-edge timer
|
|
1: 8949 8958 IO-APIC-edge keyboard
|
|
2: 0 0 XT-PIC cascade
|
|
5: 11286 10161 IO-APIC-edge soundblaster
|
|
8: 1 0 IO-APIC-edge rtc
|
|
9: 27422 27407 IO-APIC-edge 3c503
|
|
12: 113645 113873 IO-APIC-edge PS/2 Mouse
|
|
13: 0 0 XT-PIC fpu
|
|
14: 22491 24012 IO-APIC-edge ide0
|
|
15: 2183 2415 IO-APIC-edge ide1
|
|
17: 30564 30414 IO-APIC-level eth0
|
|
18: 177 164 IO-APIC-level bttv
|
|
NMI: 2457961 2457959
|
|
LOC: 2457882 2457881
|
|
ERR: 2155
|
|
|
|
NMI is incremented in this case because every timer interrupt generates a NMI
|
|
(Non Maskable Interrupt) which is used by the NMI Watchdog to detect lockups.
|
|
|
|
LOC is the local interrupt counter of the internal APIC of every CPU.
|
|
|
|
ERR is incremented in the case of errors in the IO-APIC bus (the bus that
|
|
connects the CPUs in a SMP system. This means that an error has been detected,
|
|
the IO-APIC automatically retry the transmission, so it should not be a big
|
|
problem, but you should read the SMP-FAQ.
|
|
|
|
In 2.6.2* /proc/interrupts was expanded again. This time the goal was for
|
|
/proc/interrupts to display every IRQ vector in use by the system, not
|
|
just those considered 'most important'. The new vectors are:
|
|
|
|
THR
|
|
interrupt raised when a machine check threshold counter
|
|
(typically counting ECC corrected errors of memory or cache) exceeds
|
|
a configurable threshold. Only available on some systems.
|
|
|
|
TRM
|
|
a thermal event interrupt occurs when a temperature threshold
|
|
has been exceeded for the CPU. This interrupt may also be generated
|
|
when the temperature drops back to normal.
|
|
|
|
SPU
|
|
a spurious interrupt is some interrupt that was raised then lowered
|
|
by some IO device before it could be fully processed by the APIC. Hence
|
|
the APIC sees the interrupt but does not know what device it came from.
|
|
For this case the APIC will generate the interrupt with a IRQ vector
|
|
of 0xff. This might also be generated by chipset bugs.
|
|
|
|
RES, CAL, TLB
|
|
rescheduling, call and TLB flush interrupts are
|
|
sent from one CPU to another per the needs of the OS. Typically,
|
|
their statistics are used by kernel developers and interested users to
|
|
determine the occurrence of interrupts of the given type.
|
|
|
|
The above IRQ vectors are displayed only when relevant. For example,
|
|
the threshold vector does not exist on x86_64 platforms. Others are
|
|
suppressed when the system is a uniprocessor. As of this writing, only
|
|
i386 and x86_64 platforms support the new IRQ vector displays.
|
|
|
|
Of some interest is the introduction of the /proc/irq directory to 2.4.
|
|
It could be used to set IRQ to CPU affinity. This means that you can "hook" an
|
|
IRQ to only one CPU, or to exclude a CPU of handling IRQs. The contents of the
|
|
irq subdir is one subdir for each IRQ, and two files; default_smp_affinity and
|
|
prof_cpu_mask.
|
|
|
|
For example::
|
|
|
|
> ls /proc/irq/
|
|
0 10 12 14 16 18 2 4 6 8 prof_cpu_mask
|
|
1 11 13 15 17 19 3 5 7 9 default_smp_affinity
|
|
> ls /proc/irq/0/
|
|
smp_affinity
|
|
|
|
smp_affinity is a bitmask, in which you can specify which CPUs can handle the
|
|
IRQ. You can set it by doing::
|
|
|
|
> echo 1 > /proc/irq/10/smp_affinity
|
|
|
|
This means that only the first CPU will handle the IRQ, but you can also echo
|
|
5 which means that only the first and third CPU can handle the IRQ.
|
|
|
|
The contents of each smp_affinity file is the same by default::
|
|
|
|
> cat /proc/irq/0/smp_affinity
|
|
ffffffff
|
|
|
|
There is an alternate interface, smp_affinity_list which allows specifying
|
|
a CPU range instead of a bitmask::
|
|
|
|
> cat /proc/irq/0/smp_affinity_list
|
|
1024-1031
|
|
|
|
The default_smp_affinity mask applies to all non-active IRQs, which are the
|
|
IRQs which have not yet been allocated/activated, and hence which lack a
|
|
/proc/irq/[0-9]* directory.
|
|
|
|
The node file on an SMP system shows the node to which the device using the IRQ
|
|
reports itself as being attached. This hardware locality information does not
|
|
include information about any possible driver locality preference.
|
|
|
|
prof_cpu_mask specifies which CPUs are to be profiled by the system wide
|
|
profiler. Default value is ffffffff (all CPUs if there are only 32 of them).
|
|
|
|
The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
|
|
between all the CPUs which are allowed to handle it. As usual the kernel has
|
|
more info than you and does a better job than you, so the defaults are the
|
|
best choice for almost everyone. [Note this applies only to those IO-APIC's
|
|
that support "Round Robin" interrupt distribution.]
|
|
|
|
There are three more important subdirectories in /proc: net, scsi, and sys.
|
|
The general rule is that the contents, or even the existence of these
|
|
directories, depend on your kernel configuration. If SCSI is not enabled, the
|
|
directory scsi may not exist. The same is true with the net, which is there
|
|
only when networking support is present in the running kernel.
|
|
|
|
The slabinfo file gives information about memory usage at the slab level.
|
|
Linux uses slab pools for memory management above page level in version 2.2.
|
|
Commonly used objects have their own slab pool (such as network buffers,
|
|
directory cache, and so on).
|
|
|
|
::
|
|
|
|
> cat /proc/buddyinfo
|
|
|
|
Node 0, zone DMA 0 4 5 4 4 3 ...
|
|
Node 0, zone Normal 1 0 0 1 101 8 ...
|
|
Node 0, zone HighMem 2 0 0 1 1 0 ...
|
|
|
|
External fragmentation is a problem under some workloads, and buddyinfo is a
|
|
useful tool for helping diagnose these problems. Buddyinfo will give you a
|
|
clue as to how big an area you can safely allocate, or why a previous
|
|
allocation failed.
|
|
|
|
Each column represents the number of pages of a certain order which are
|
|
available. In this case, there are 0 chunks of 2^0*PAGE_SIZE available in
|
|
ZONE_DMA, 4 chunks of 2^1*PAGE_SIZE in ZONE_DMA, 101 chunks of 2^4*PAGE_SIZE
|
|
available in ZONE_NORMAL, etc...
|
|
|
|
More information relevant to external fragmentation can be found in
|
|
pagetypeinfo::
|
|
|
|
> cat /proc/pagetypeinfo
|
|
Page block order: 9
|
|
Pages per block: 512
|
|
|
|
Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
|
|
Node 0, zone DMA, type Unmovable 0 0 0 1 1 1 1 1 1 1 0
|
|
Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
|
|
Node 0, zone DMA, type Movable 1 1 2 1 2 1 1 0 1 0 2
|
|
Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 1 0
|
|
Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0
|
|
Node 0, zone DMA32, type Unmovable 103 54 77 1 1 1 11 8 7 1 9
|
|
Node 0, zone DMA32, type Reclaimable 0 0 2 1 0 0 0 0 1 0 0
|
|
Node 0, zone DMA32, type Movable 169 152 113 91 77 54 39 13 6 1 452
|
|
Node 0, zone DMA32, type Reserve 1 2 2 2 2 0 1 1 1 1 0
|
|
Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0
|
|
|
|
Number of blocks type Unmovable Reclaimable Movable Reserve Isolate
|
|
Node 0, zone DMA 2 0 5 1 0
|
|
Node 0, zone DMA32 41 6 967 2 0
|
|
|
|
Fragmentation avoidance in the kernel works by grouping pages of different
|
|
migrate types into the same contiguous regions of memory called page blocks.
|
|
A page block is typically the size of the default hugepage size, e.g. 2MB on
|
|
X86-64. By keeping pages grouped based on their ability to move, the kernel
|
|
can reclaim pages within a page block to satisfy a high-order allocation.
|
|
|
|
The pagetypinfo begins with information on the size of a page block. It
|
|
then gives the same type of information as buddyinfo except broken down
|
|
by migrate-type and finishes with details on how many page blocks of each
|
|
type exist.
|
|
|
|
If min_free_kbytes has been tuned correctly (recommendations made by hugeadm
|
|
from libhugetlbfs https://github.com/libhugetlbfs/libhugetlbfs/), one can
|
|
make an estimate of the likely number of huge pages that can be allocated
|
|
at a given point in time. All the "Movable" blocks should be allocatable
|
|
unless memory has been mlock()'d. Some of the Reclaimable blocks should
|
|
also be allocatable although a lot of filesystem metadata may have to be
|
|
reclaimed to achieve this.
|
|
|
|
|
|
meminfo
|
|
~~~~~~~
|
|
|
|
Provides information about distribution and utilization of memory. This
|
|
varies by architecture and compile options. Some of the counters reported
|
|
here overlap. The memory reported by the non overlapping counters may not
|
|
add up to the overall memory usage and the difference for some workloads
|
|
can be substantial. In many cases there are other means to find out
|
|
additional memory using subsystem specific interfaces, for instance
|
|
/proc/net/sockstat for TCP memory allocations.
|
|
|
|
Example output. You may not have all of these fields.
|
|
|
|
::
|
|
|
|
> cat /proc/meminfo
|
|
|
|
MemTotal: 32858820 kB
|
|
MemFree: 21001236 kB
|
|
MemAvailable: 27214312 kB
|
|
Buffers: 581092 kB
|
|
Cached: 5587612 kB
|
|
SwapCached: 0 kB
|
|
Active: 3237152 kB
|
|
Inactive: 7586256 kB
|
|
Active(anon): 94064 kB
|
|
Inactive(anon): 4570616 kB
|
|
Active(file): 3143088 kB
|
|
Inactive(file): 3015640 kB
|
|
Unevictable: 0 kB
|
|
Mlocked: 0 kB
|
|
SwapTotal: 0 kB
|
|
SwapFree: 0 kB
|
|
Zswap: 1904 kB
|
|
Zswapped: 7792 kB
|
|
Dirty: 12 kB
|
|
Writeback: 0 kB
|
|
AnonPages: 4654780 kB
|
|
Mapped: 266244 kB
|
|
Shmem: 9976 kB
|
|
KReclaimable: 517708 kB
|
|
Slab: 660044 kB
|
|
SReclaimable: 517708 kB
|
|
SUnreclaim: 142336 kB
|
|
KernelStack: 11168 kB
|
|
PageTables: 20540 kB
|
|
SecPageTables: 0 kB
|
|
NFS_Unstable: 0 kB
|
|
Bounce: 0 kB
|
|
WritebackTmp: 0 kB
|
|
CommitLimit: 16429408 kB
|
|
Committed_AS: 7715148 kB
|
|
VmallocTotal: 34359738367 kB
|
|
VmallocUsed: 40444 kB
|
|
VmallocChunk: 0 kB
|
|
Percpu: 29312 kB
|
|
HardwareCorrupted: 0 kB
|
|
AnonHugePages: 4149248 kB
|
|
ShmemHugePages: 0 kB
|
|
ShmemPmdMapped: 0 kB
|
|
FileHugePages: 0 kB
|
|
FilePmdMapped: 0 kB
|
|
CmaTotal: 0 kB
|
|
CmaFree: 0 kB
|
|
HugePages_Total: 0
|
|
HugePages_Free: 0
|
|
HugePages_Rsvd: 0
|
|
HugePages_Surp: 0
|
|
Hugepagesize: 2048 kB
|
|
Hugetlb: 0 kB
|
|
DirectMap4k: 401152 kB
|
|
DirectMap2M: 10008576 kB
|
|
DirectMap1G: 24117248 kB
|
|
|
|
MemTotal
|
|
Total usable RAM (i.e. physical RAM minus a few reserved
|
|
bits and the kernel binary code)
|
|
MemFree
|
|
Total free RAM. On highmem systems, the sum of LowFree+HighFree
|
|
MemAvailable
|
|
An estimate of how much memory is available for starting new
|
|
applications, without swapping. Calculated from MemFree,
|
|
SReclaimable, the size of the file LRU lists, and the low
|
|
watermarks in each zone.
|
|
The estimate takes into account that the system needs some
|
|
page cache to function well, and that not all reclaimable
|
|
slab will be reclaimable, due to items being in use. The
|
|
impact of those factors will vary from system to system.
|
|
Buffers
|
|
Relatively temporary storage for raw disk blocks
|
|
shouldn't get tremendously large (20MB or so)
|
|
Cached
|
|
In-memory cache for files read from the disk (the
|
|
pagecache) as well as tmpfs & shmem.
|
|
Doesn't include SwapCached.
|
|
SwapCached
|
|
Memory that once was swapped out, is swapped back in but
|
|
still also is in the swapfile (if memory is needed it
|
|
doesn't need to be swapped out AGAIN because it is already
|
|
in the swapfile. This saves I/O)
|
|
Active
|
|
Memory that has been used more recently and usually not
|
|
reclaimed unless absolutely necessary.
|
|
Inactive
|
|
Memory which has been less recently used. It is more
|
|
eligible to be reclaimed for other purposes
|
|
Unevictable
|
|
Memory allocated for userspace which cannot be reclaimed, such
|
|
as mlocked pages, ramfs backing pages, secret memfd pages etc.
|
|
Mlocked
|
|
Memory locked with mlock().
|
|
HighTotal, HighFree
|
|
Highmem is all memory above ~860MB of physical memory.
|
|
Highmem areas are for use by userspace programs, or
|
|
for the pagecache. The kernel must use tricks to access
|
|
this memory, making it slower to access than lowmem.
|
|
LowTotal, LowFree
|
|
Lowmem is memory which can be used for everything that
|
|
highmem can be used for, but it is also available for the
|
|
kernel's use for its own data structures. Among many
|
|
other things, it is where everything from the Slab is
|
|
allocated. Bad things happen when you're out of lowmem.
|
|
SwapTotal
|
|
total amount of swap space available
|
|
SwapFree
|
|
Memory which has been evicted from RAM, and is temporarily
|
|
on the disk
|
|
Zswap
|
|
Memory consumed by the zswap backend (compressed size)
|
|
Zswapped
|
|
Amount of anonymous memory stored in zswap (original size)
|
|
Dirty
|
|
Memory which is waiting to get written back to the disk
|
|
Writeback
|
|
Memory which is actively being written back to the disk
|
|
AnonPages
|
|
Non-file backed pages mapped into userspace page tables
|
|
Mapped
|
|
files which have been mmaped, such as libraries
|
|
Shmem
|
|
Total memory used by shared memory (shmem) and tmpfs
|
|
KReclaimable
|
|
Kernel allocations that the kernel will attempt to reclaim
|
|
under memory pressure. Includes SReclaimable (below), and other
|
|
direct allocations with a shrinker.
|
|
Slab
|
|
in-kernel data structures cache
|
|
SReclaimable
|
|
Part of Slab, that might be reclaimed, such as caches
|
|
SUnreclaim
|
|
Part of Slab, that cannot be reclaimed on memory pressure
|
|
KernelStack
|
|
Memory consumed by the kernel stacks of all tasks
|
|
PageTables
|
|
Memory consumed by userspace page tables
|
|
SecPageTables
|
|
Memory consumed by secondary page tables, this currently
|
|
currently includes KVM mmu allocations on x86 and arm64.
|
|
NFS_Unstable
|
|
Always zero. Previous counted pages which had been written to
|
|
the server, but has not been committed to stable storage.
|
|
Bounce
|
|
Memory used for block device "bounce buffers"
|
|
WritebackTmp
|
|
Memory used by FUSE for temporary writeback buffers
|
|
CommitLimit
|
|
Based on the overcommit ratio ('vm.overcommit_ratio'),
|
|
this is the total amount of memory currently available to
|
|
be allocated on the system. This limit is only adhered to
|
|
if strict overcommit accounting is enabled (mode 2 in
|
|
'vm.overcommit_memory').
|
|
|
|
The CommitLimit is calculated with the following formula::
|
|
|
|
CommitLimit = ([total RAM pages] - [total huge TLB pages]) *
|
|
overcommit_ratio / 100 + [total swap pages]
|
|
|
|
For example, on a system with 1G of physical RAM and 7G
|
|
of swap with a `vm.overcommit_ratio` of 30 it would
|
|
yield a CommitLimit of 7.3G.
|
|
|
|
For more details, see the memory overcommit documentation
|
|
in mm/overcommit-accounting.
|
|
Committed_AS
|
|
The amount of memory presently allocated on the system.
|
|
The committed memory is a sum of all of the memory which
|
|
has been allocated by processes, even if it has not been
|
|
"used" by them as of yet. A process which malloc()'s 1G
|
|
of memory, but only touches 300M of it will show up as
|
|
using 1G. This 1G is memory which has been "committed" to
|
|
by the VM and can be used at any time by the allocating
|
|
application. With strict overcommit enabled on the system
|
|
(mode 2 in 'vm.overcommit_memory'), allocations which would
|
|
exceed the CommitLimit (detailed above) will not be permitted.
|
|
This is useful if one needs to guarantee that processes will
|
|
not fail due to lack of memory once that memory has been
|
|
successfully allocated.
|
|
VmallocTotal
|
|
total size of vmalloc virtual address space
|
|
VmallocUsed
|
|
amount of vmalloc area which is used
|
|
VmallocChunk
|
|
largest contiguous block of vmalloc area which is free
|
|
Percpu
|
|
Memory allocated to the percpu allocator used to back percpu
|
|
allocations. This stat excludes the cost of metadata.
|
|
HardwareCorrupted
|
|
The amount of RAM/memory in KB, the kernel identifies as
|
|
corrupted.
|
|
AnonHugePages
|
|
Non-file backed huge pages mapped into userspace page tables
|
|
ShmemHugePages
|
|
Memory used by shared memory (shmem) and tmpfs allocated
|
|
with huge pages
|
|
ShmemPmdMapped
|
|
Shared memory mapped into userspace with huge pages
|
|
FileHugePages
|
|
Memory used for filesystem data (page cache) allocated
|
|
with huge pages
|
|
FilePmdMapped
|
|
Page cache mapped into userspace with huge pages
|
|
CmaTotal
|
|
Memory reserved for the Contiguous Memory Allocator (CMA)
|
|
CmaFree
|
|
Free remaining memory in the CMA reserves
|
|
HugePages_Total, HugePages_Free, HugePages_Rsvd, HugePages_Surp, Hugepagesize, Hugetlb
|
|
See Documentation/admin-guide/mm/hugetlbpage.rst.
|
|
DirectMap4k, DirectMap2M, DirectMap1G
|
|
Breakdown of page table sizes used in the kernel's
|
|
identity mapping of RAM
|
|
|
|
vmallocinfo
|
|
~~~~~~~~~~~
|
|
|
|
Provides information about vmalloced/vmaped areas. One line per area,
|
|
containing the virtual address range of the area, size in bytes,
|
|
caller information of the creator, and optional information depending
|
|
on the kind of area:
|
|
|
|
========== ===================================================
|
|
pages=nr number of pages
|
|
phys=addr if a physical address was specified
|
|
ioremap I/O mapping (ioremap() and friends)
|
|
vmalloc vmalloc() area
|
|
vmap vmap()ed pages
|
|
user VM_USERMAP area
|
|
vpages buffer for pages pointers was vmalloced (huge area)
|
|
N<node>=nr (Only on NUMA kernels)
|
|
Number of pages allocated on memory node <node>
|
|
========== ===================================================
|
|
|
|
::
|
|
|
|
> cat /proc/vmallocinfo
|
|
0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ...
|
|
/0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
|
|
0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ...
|
|
/0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
|
|
0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f...
|
|
phys=7fee8000 ioremap
|
|
0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f...
|
|
phys=7fee7000 ioremap
|
|
0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210
|
|
0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ...
|
|
/0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
|
|
0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ...
|
|
pages=2 vmalloc N1=2
|
|
0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ...
|
|
/0x130 [x_tables] pages=4 vmalloc N0=4
|
|
0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ...
|
|
pages=14 vmalloc N2=14
|
|
0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ...
|
|
pages=4 vmalloc N1=4
|
|
0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ...
|
|
pages=2 vmalloc N1=2
|
|
0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ...
|
|
pages=10 vmalloc N0=10
|
|
|
|
|
|
softirqs
|
|
~~~~~~~~
|
|
|
|
Provides counts of softirq handlers serviced since boot time, for each CPU.
|
|
|
|
::
|
|
|
|
> cat /proc/softirqs
|
|
CPU0 CPU1 CPU2 CPU3
|
|
HI: 0 0 0 0
|
|
TIMER: 27166 27120 27097 27034
|
|
NET_TX: 0 0 0 17
|
|
NET_RX: 42 0 0 39
|
|
BLOCK: 0 0 107 1121
|
|
TASKLET: 0 0 0 290
|
|
SCHED: 27035 26983 26971 26746
|
|
HRTIMER: 0 0 0 0
|
|
RCU: 1678 1769 2178 2250
|
|
|
|
1.3 Networking info in /proc/net
|
|
--------------------------------
|
|
|
|
The subdirectory /proc/net follows the usual pattern. Table 1-8 shows the
|
|
additional values you get for IP version 6 if you configure the kernel to
|
|
support this. Table 1-9 lists the files and their meaning.
|
|
|
|
|
|
.. table:: Table 1-8: IPv6 info in /proc/net
|
|
|
|
========== =====================================================
|
|
File Content
|
|
========== =====================================================
|
|
udp6 UDP sockets (IPv6)
|
|
tcp6 TCP sockets (IPv6)
|
|
raw6 Raw device statistics (IPv6)
|
|
igmp6 IP multicast addresses, which this host joined (IPv6)
|
|
if_inet6 List of IPv6 interface addresses
|
|
ipv6_route Kernel routing table for IPv6
|
|
rt6_stats Global IPv6 routing tables statistics
|
|
sockstat6 Socket statistics (IPv6)
|
|
snmp6 Snmp data (IPv6)
|
|
========== =====================================================
|
|
|
|
.. table:: Table 1-9: Network info in /proc/net
|
|
|
|
============= ================================================================
|
|
File Content
|
|
============= ================================================================
|
|
arp Kernel ARP table
|
|
dev network devices with statistics
|
|
dev_mcast the Layer2 multicast groups a device is listening too
|
|
(interface index, label, number of references, number of bound
|
|
addresses).
|
|
dev_stat network device status
|
|
ip_fwchains Firewall chain linkage
|
|
ip_fwnames Firewall chain names
|
|
ip_masq Directory containing the masquerading tables
|
|
ip_masquerade Major masquerading table
|
|
netstat Network statistics
|
|
raw raw device statistics
|
|
route Kernel routing table
|
|
rpc Directory containing rpc info
|
|
rt_cache Routing cache
|
|
snmp SNMP data
|
|
sockstat Socket statistics
|
|
tcp TCP sockets
|
|
udp UDP sockets
|
|
unix UNIX domain sockets
|
|
wireless Wireless interface data (Wavelan etc)
|
|
igmp IP multicast addresses, which this host joined
|
|
psched Global packet scheduler parameters.
|
|
netlink List of PF_NETLINK sockets
|
|
ip_mr_vifs List of multicast virtual interfaces
|
|
ip_mr_cache List of multicast routing cache
|
|
============= ================================================================
|
|
|
|
You can use this information to see which network devices are available in
|
|
your system and how much traffic was routed over those devices::
|
|
|
|
> cat /proc/net/dev
|
|
Inter-|Receive |[...
|
|
face |bytes packets errs drop fifo frame compressed multicast|[...
|
|
lo: 908188 5596 0 0 0 0 0 0 [...
|
|
ppp0:15475140 20721 410 0 0 410 0 0 [...
|
|
eth0: 614530 7085 0 0 0 0 0 1 [...
|
|
|
|
...] Transmit
|
|
...] bytes packets errs drop fifo colls carrier compressed
|
|
...] 908188 5596 0 0 0 0 0 0
|
|
...] 1375103 17405 0 0 0 0 0 0
|
|
...] 1703981 5535 0 0 0 3 0 0
|
|
|
|
In addition, each Channel Bond interface has its own directory. For
|
|
example, the bond0 device will have a directory called /proc/net/bond0/.
|
|
It will contain information that is specific to that bond, such as the
|
|
current slaves of the bond, the link status of the slaves, and how
|
|
many times the slaves link has failed.
|
|
|
|
1.4 SCSI info
|
|
-------------
|
|
|
|
If you have a SCSI host adapter in your system, you'll find a subdirectory
|
|
named after the driver for this adapter in /proc/scsi. You'll also see a list
|
|
of all recognized SCSI devices in /proc/scsi::
|
|
|
|
>cat /proc/scsi/scsi
|
|
Attached devices:
|
|
Host: scsi0 Channel: 00 Id: 00 Lun: 00
|
|
Vendor: IBM Model: DGHS09U Rev: 03E0
|
|
Type: Direct-Access ANSI SCSI revision: 03
|
|
Host: scsi0 Channel: 00 Id: 06 Lun: 00
|
|
Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.04
|
|
Type: CD-ROM ANSI SCSI revision: 02
|
|
|
|
|
|
The directory named after the driver has one file for each adapter found in
|
|
the system. These files contain information about the controller, including
|
|
the used IRQ and the IO address range. The amount of information shown is
|
|
dependent on the adapter you use. The example shows the output for an Adaptec
|
|
AHA-2940 SCSI adapter::
|
|
|
|
> cat /proc/scsi/aic7xxx/0
|
|
|
|
Adaptec AIC7xxx driver version: 5.1.19/3.2.4
|
|
Compile Options:
|
|
TCQ Enabled By Default : Disabled
|
|
AIC7XXX_PROC_STATS : Disabled
|
|
AIC7XXX_RESET_DELAY : 5
|
|
Adapter Configuration:
|
|
SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
|
|
Ultra Wide Controller
|
|
PCI MMAPed I/O Base: 0xeb001000
|
|
Adapter SEEPROM Config: SEEPROM found and used.
|
|
Adaptec SCSI BIOS: Enabled
|
|
IRQ: 10
|
|
SCBs: Active 0, Max Active 2,
|
|
Allocated 15, HW 16, Page 255
|
|
Interrupts: 160328
|
|
BIOS Control Word: 0x18b6
|
|
Adapter Control Word: 0x005b
|
|
Extended Translation: Enabled
|
|
Disconnect Enable Flags: 0xffff
|
|
Ultra Enable Flags: 0x0001
|
|
Tag Queue Enable Flags: 0x0000
|
|
Ordered Queue Tag Flags: 0x0000
|
|
Default Tag Queue Depth: 8
|
|
Tagged Queue By Device array for aic7xxx host instance 0:
|
|
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
|
|
Actual queue depth per device for aic7xxx host instance 0:
|
|
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
|
|
Statistics:
|
|
(scsi0:0:0:0)
|
|
Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8
|
|
Transinfo settings: current(12/8/1/0), goal(12/8/1/0), user(12/15/1/0)
|
|
Total transfers 160151 (74577 reads and 85574 writes)
|
|
(scsi0:0:6:0)
|
|
Device using Narrow/Sync transfers at 5.0 MByte/sec, offset 15
|
|
Transinfo settings: current(50/15/0/0), goal(50/15/0/0), user(50/15/0/0)
|
|
Total transfers 0 (0 reads and 0 writes)
|
|
|
|
|
|
1.5 Parallel port info in /proc/parport
|
|
---------------------------------------
|
|
|
|
The directory /proc/parport contains information about the parallel ports of
|
|
your system. It has one subdirectory for each port, named after the port
|
|
number (0,1,2,...).
|
|
|
|
These directories contain the four files shown in Table 1-10.
|
|
|
|
|
|
.. table:: Table 1-10: Files in /proc/parport
|
|
|
|
========= ====================================================================
|
|
File Content
|
|
========= ====================================================================
|
|
autoprobe Any IEEE-1284 device ID information that has been acquired.
|
|
devices list of the device drivers using that port. A + will appear by the
|
|
name of the device currently using the port (it might not appear
|
|
against any).
|
|
hardware Parallel port's base address, IRQ line and DMA channel.
|
|
irq IRQ that parport is using for that port. This is in a separate
|
|
file to allow you to alter it by writing a new value in (IRQ
|
|
number or none).
|
|
========= ====================================================================
|
|
|
|
1.6 TTY info in /proc/tty
|
|
-------------------------
|
|
|
|
Information about the available and actually used tty's can be found in the
|
|
directory /proc/tty. You'll find entries for drivers and line disciplines in
|
|
this directory, as shown in Table 1-11.
|
|
|
|
|
|
.. table:: Table 1-11: Files in /proc/tty
|
|
|
|
============= ==============================================
|
|
File Content
|
|
============= ==============================================
|
|
drivers list of drivers and their usage
|
|
ldiscs registered line disciplines
|
|
driver/serial usage statistic and status of single tty lines
|
|
============= ==============================================
|
|
|
|
To see which tty's are currently in use, you can simply look into the file
|
|
/proc/tty/drivers::
|
|
|
|
> cat /proc/tty/drivers
|
|
pty_slave /dev/pts 136 0-255 pty:slave
|
|
pty_master /dev/ptm 128 0-255 pty:master
|
|
pty_slave /dev/ttyp 3 0-255 pty:slave
|
|
pty_master /dev/pty 2 0-255 pty:master
|
|
serial /dev/cua 5 64-67 serial:callout
|
|
serial /dev/ttyS 4 64-67 serial
|
|
/dev/tty0 /dev/tty0 4 0 system:vtmaster
|
|
/dev/ptmx /dev/ptmx 5 2 system
|
|
/dev/console /dev/console 5 1 system:console
|
|
/dev/tty /dev/tty 5 0 system:/dev/tty
|
|
unknown /dev/tty 4 1-63 console
|
|
|
|
|
|
1.7 Miscellaneous kernel statistics in /proc/stat
|
|
-------------------------------------------------
|
|
|
|
Various pieces of information about kernel activity are available in the
|
|
/proc/stat file. All of the numbers reported in this file are aggregates
|
|
since the system first booted. For a quick look, simply cat the file::
|
|
|
|
> cat /proc/stat
|
|
cpu 2255 34 2290 22625563 6290 127 456 0 0 0
|
|
cpu0 1132 34 1441 11311718 3675 127 438 0 0 0
|
|
cpu1 1123 0 849 11313845 2614 0 18 0 0 0
|
|
intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...]
|
|
ctxt 1990473
|
|
btime 1062191376
|
|
processes 2915
|
|
procs_running 1
|
|
procs_blocked 0
|
|
softirq 183433 0 21755 12 39 1137 231 21459 2263
|
|
|
|
The very first "cpu" line aggregates the numbers in all of the other "cpuN"
|
|
lines. These numbers identify the amount of time the CPU has spent performing
|
|
different kinds of work. Time units are in USER_HZ (typically hundredths of a
|
|
second). The meanings of the columns are as follows, from left to right:
|
|
|
|
- user: normal processes executing in user mode
|
|
- nice: niced processes executing in user mode
|
|
- system: processes executing in kernel mode
|
|
- idle: twiddling thumbs
|
|
- iowait: In a word, iowait stands for waiting for I/O to complete. But there
|
|
are several problems:
|
|
|
|
1. CPU will not wait for I/O to complete, iowait is the time that a task is
|
|
waiting for I/O to complete. When CPU goes into idle state for
|
|
outstanding task I/O, another task will be scheduled on this CPU.
|
|
2. In a multi-core CPU, the task waiting for I/O to complete is not running
|
|
on any CPU, so the iowait of each CPU is difficult to calculate.
|
|
3. The value of iowait field in /proc/stat will decrease in certain
|
|
conditions.
|
|
|
|
So, the iowait is not reliable by reading from /proc/stat.
|
|
- irq: servicing interrupts
|
|
- softirq: servicing softirqs
|
|
- steal: involuntary wait
|
|
- guest: running a normal guest
|
|
- guest_nice: running a niced guest
|
|
|
|
The "intr" line gives counts of interrupts serviced since boot time, for each
|
|
of the possible system interrupts. The first column is the total of all
|
|
interrupts serviced including unnumbered architecture specific interrupts;
|
|
each subsequent column is the total for that particular numbered interrupt.
|
|
Unnumbered interrupts are not shown, only summed into the total.
|
|
|
|
The "ctxt" line gives the total number of context switches across all CPUs.
|
|
|
|
The "btime" line gives the time at which the system booted, in seconds since
|
|
the Unix epoch.
|
|
|
|
The "processes" line gives the number of processes and threads created, which
|
|
includes (but is not limited to) those created by calls to the fork() and
|
|
clone() system calls.
|
|
|
|
The "procs_running" line gives the total number of threads that are
|
|
running or ready to run (i.e., the total number of runnable threads).
|
|
|
|
The "procs_blocked" line gives the number of processes currently blocked,
|
|
waiting for I/O to complete.
|
|
|
|
The "softirq" line gives counts of softirqs serviced since boot time, for each
|
|
of the possible system softirqs. The first column is the total of all
|
|
softirqs serviced; each subsequent column is the total for that particular
|
|
softirq.
|
|
|
|
|
|
1.8 Ext4 file system parameters
|
|
-------------------------------
|
|
|
|
Information about mounted ext4 file systems can be found in
|
|
/proc/fs/ext4. Each mounted filesystem will have a directory in
|
|
/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
|
|
/proc/fs/ext4/dm-0). The files in each per-device directory are shown
|
|
in Table 1-12, below.
|
|
|
|
.. table:: Table 1-12: Files in /proc/fs/ext4/<devname>
|
|
|
|
============== ==========================================================
|
|
File Content
|
|
mb_groups details of multiblock allocator buddy cache of free blocks
|
|
============== ==========================================================
|
|
|
|
1.9 /proc/consoles
|
|
-------------------
|
|
Shows registered system console lines.
|
|
|
|
To see which character device lines are currently used for the system console
|
|
/dev/console, you may simply look into the file /proc/consoles::
|
|
|
|
> cat /proc/consoles
|
|
tty0 -WU (ECp) 4:7
|
|
ttyS0 -W- (Ep) 4:64
|
|
|
|
The columns are:
|
|
|
|
+--------------------+-------------------------------------------------------+
|
|
| device | name of the device |
|
|
+====================+=======================================================+
|
|
| operations | * R = can do read operations |
|
|
| | * W = can do write operations |
|
|
| | * U = can do unblank |
|
|
+--------------------+-------------------------------------------------------+
|
|
| flags | * E = it is enabled |
|
|
| | * C = it is preferred console |
|
|
| | * B = it is primary boot console |
|
|
| | * p = it is used for printk buffer |
|
|
| | * b = it is not a TTY but a Braille device |
|
|
| | * a = it is safe to use when cpu is offline |
|
|
+--------------------+-------------------------------------------------------+
|
|
| major:minor | major and minor number of the device separated by a |
|
|
| | colon |
|
|
+--------------------+-------------------------------------------------------+
|
|
|
|
Summary
|
|
-------
|
|
|
|
The /proc file system serves information about the running system. It not only
|
|
allows access to process data but also allows you to request the kernel status
|
|
by reading files in the hierarchy.
|
|
|
|
The directory structure of /proc reflects the types of information and makes
|
|
it easy, if not obvious, where to look for specific data.
|
|
|
|
Chapter 2: Modifying System Parameters
|
|
======================================
|
|
|
|
In This Chapter
|
|
---------------
|
|
|
|
* Modifying kernel parameters by writing into files found in /proc/sys
|
|
* Exploring the files which modify certain parameters
|
|
* Review of the /proc/sys file tree
|
|
|
|
------------------------------------------------------------------------------
|
|
|
|
A very interesting part of /proc is the directory /proc/sys. This is not only
|
|
a source of information, it also allows you to change parameters within the
|
|
kernel. Be very careful when attempting this. You can optimize your system,
|
|
but you can also cause it to crash. Never alter kernel parameters on a
|
|
production system. Set up a development machine and test to make sure that
|
|
everything works the way you want it to. You may have no alternative but to
|
|
reboot the machine once an error has been made.
|
|
|
|
To change a value, simply echo the new value into the file.
|
|
You need to be root to do this. You can create your own boot script
|
|
to perform this every time your system boots.
|
|
|
|
The files in /proc/sys can be used to fine tune and monitor miscellaneous and
|
|
general things in the operation of the Linux kernel. Since some of the files
|
|
can inadvertently disrupt your system, it is advisable to read both
|
|
documentation and source before actually making adjustments. In any case, be
|
|
very careful when writing to any of these files. The entries in /proc may
|
|
change slightly between the 2.1.* and the 2.2 kernel, so if there is any doubt
|
|
review the kernel documentation in the directory /usr/src/linux/Documentation.
|
|
This chapter is heavily based on the documentation included in the pre 2.2
|
|
kernels, and became part of it in version 2.2.1 of the Linux kernel.
|
|
|
|
Please see: Documentation/admin-guide/sysctl/ directory for descriptions of these
|
|
entries.
|
|
|
|
Summary
|
|
-------
|
|
|
|
Certain aspects of kernel behavior can be modified at runtime, without the
|
|
need to recompile the kernel, or even to reboot the system. The files in the
|
|
/proc/sys tree can not only be read, but also modified. You can use the echo
|
|
command to write value into these files, thereby changing the default settings
|
|
of the kernel.
|
|
|
|
|
|
Chapter 3: Per-process Parameters
|
|
=================================
|
|
|
|
3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
|
|
--------------------------------------------------------------------------------
|
|
|
|
These files can be used to adjust the badness heuristic used to select which
|
|
process gets killed in out of memory (oom) conditions.
|
|
|
|
The badness heuristic assigns a value to each candidate task ranging from 0
|
|
(never kill) to 1000 (always kill) to determine which process is targeted. The
|
|
units are roughly a proportion along that range of allowed memory the process
|
|
may allocate from based on an estimation of its current memory and swap use.
|
|
For example, if a task is using all allowed memory, its badness score will be
|
|
1000. If it is using half of its allowed memory, its score will be 500.
|
|
|
|
The amount of "allowed" memory depends on the context in which the oom killer
|
|
was called. If it is due to the memory assigned to the allocating task's cpuset
|
|
being exhausted, the allowed memory represents the set of mems assigned to that
|
|
cpuset. If it is due to a mempolicy's node(s) being exhausted, the allowed
|
|
memory represents the set of mempolicy nodes. If it is due to a memory
|
|
limit (or swap limit) being reached, the allowed memory is that configured
|
|
limit. Finally, if it is due to the entire system being out of memory, the
|
|
allowed memory represents all allocatable resources.
|
|
|
|
The value of /proc/<pid>/oom_score_adj is added to the badness score before it
|
|
is used to determine which task to kill. Acceptable values range from -1000
|
|
(OOM_SCORE_ADJ_MIN) to +1000 (OOM_SCORE_ADJ_MAX). This allows userspace to
|
|
polarize the preference for oom killing either by always preferring a certain
|
|
task or completely disabling it. The lowest possible value, -1000, is
|
|
equivalent to disabling oom killing entirely for that task since it will always
|
|
report a badness score of 0.
|
|
|
|
Consequently, it is very simple for userspace to define the amount of memory to
|
|
consider for each task. Setting a /proc/<pid>/oom_score_adj value of +500, for
|
|
example, is roughly equivalent to allowing the remainder of tasks sharing the
|
|
same system, cpuset, mempolicy, or memory controller resources to use at least
|
|
50% more memory. A value of -500, on the other hand, would be roughly
|
|
equivalent to discounting 50% of the task's allowed memory from being considered
|
|
as scoring against the task.
|
|
|
|
For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
|
|
be used to tune the badness score. Its acceptable values range from -16
|
|
(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
|
|
(OOM_DISABLE) to disable oom killing entirely for that task. Its value is
|
|
scaled linearly with /proc/<pid>/oom_score_adj.
|
|
|
|
The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
|
|
value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
|
|
requires CAP_SYS_RESOURCE.
|
|
|
|
|
|
3.2 /proc/<pid>/oom_score - Display current oom-killer score
|
|
-------------------------------------------------------------
|
|
|
|
This file can be used to check the current score used by the oom-killer for
|
|
any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
|
|
process should be killed in an out-of-memory situation.
|
|
|
|
Please note that the exported value includes oom_score_adj so it is
|
|
effectively in range [0,2000].
|
|
|
|
|
|
3.3 /proc/<pid>/io - Display the IO accounting fields
|
|
-------------------------------------------------------
|
|
|
|
This file contains IO statistics for each running process.
|
|
|
|
Example
|
|
~~~~~~~
|
|
|
|
::
|
|
|
|
test:/tmp # dd if=/dev/zero of=/tmp/test.dat &
|
|
[1] 3828
|
|
|
|
test:/tmp # cat /proc/3828/io
|
|
rchar: 323934931
|
|
wchar: 323929600
|
|
syscr: 632687
|
|
syscw: 632675
|
|
read_bytes: 0
|
|
write_bytes: 323932160
|
|
cancelled_write_bytes: 0
|
|
|
|
|
|
Description
|
|
~~~~~~~~~~~
|
|
|
|
rchar
|
|
^^^^^
|
|
|
|
I/O counter: chars read
|
|
The number of bytes which this task has caused to be read from storage. This
|
|
is simply the sum of bytes which this process passed to read() and pread().
|
|
It includes things like tty IO and it is unaffected by whether or not actual
|
|
physical disk IO was required (the read might have been satisfied from
|
|
pagecache).
|
|
|
|
|
|
wchar
|
|
^^^^^
|
|
|
|
I/O counter: chars written
|
|
The number of bytes which this task has caused, or shall cause to be written
|
|
to disk. Similar caveats apply here as with rchar.
|
|
|
|
|
|
syscr
|
|
^^^^^
|
|
|
|
I/O counter: read syscalls
|
|
Attempt to count the number of read I/O operations, i.e. syscalls like read()
|
|
and pread().
|
|
|
|
|
|
syscw
|
|
^^^^^
|
|
|
|
I/O counter: write syscalls
|
|
Attempt to count the number of write I/O operations, i.e. syscalls like
|
|
write() and pwrite().
|
|
|
|
|
|
read_bytes
|
|
^^^^^^^^^^
|
|
|
|
I/O counter: bytes read
|
|
Attempt to count the number of bytes which this process really did cause to
|
|
be fetched from the storage layer. Done at the submit_bio() level, so it is
|
|
accurate for block-backed filesystems. <please add status regarding NFS and
|
|
CIFS at a later time>
|
|
|
|
|
|
write_bytes
|
|
^^^^^^^^^^^
|
|
|
|
I/O counter: bytes written
|
|
Attempt to count the number of bytes which this process caused to be sent to
|
|
the storage layer. This is done at page-dirtying time.
|
|
|
|
|
|
cancelled_write_bytes
|
|
^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
The big inaccuracy here is truncate. If a process writes 1MB to a file and
|
|
then deletes the file, it will in fact perform no writeout. But it will have
|
|
been accounted as having caused 1MB of write.
|
|
In other words: The number of bytes which this process caused to not happen,
|
|
by truncating pagecache. A task can cause "negative" IO too. If this task
|
|
truncates some dirty pagecache, some IO which another task has been accounted
|
|
for (in its write_bytes) will not be happening. We _could_ just subtract that
|
|
from the truncating task's write_bytes, but there is information loss in doing
|
|
that.
|
|
|
|
|
|
.. Note::
|
|
|
|
At its current implementation state, this is a bit racy on 32-bit machines:
|
|
if process A reads process B's /proc/pid/io while process B is updating one
|
|
of those 64-bit counters, process A could see an intermediate result.
|
|
|
|
|
|
More information about this can be found within the taskstats documentation in
|
|
Documentation/accounting.
|
|
|
|
3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
|
|
---------------------------------------------------------------
|
|
When a process is dumped, all anonymous memory is written to a core file as
|
|
long as the size of the core file isn't limited. But sometimes we don't want
|
|
to dump some memory segments, for example, huge shared memory or DAX.
|
|
Conversely, sometimes we want to save file-backed memory segments into a core
|
|
file, not only the individual files.
|
|
|
|
/proc/<pid>/coredump_filter allows you to customize which memory segments
|
|
will be dumped when the <pid> process is dumped. coredump_filter is a bitmask
|
|
of memory types. If a bit of the bitmask is set, memory segments of the
|
|
corresponding memory type are dumped, otherwise they are not dumped.
|
|
|
|
The following 9 memory types are supported:
|
|
|
|
- (bit 0) anonymous private memory
|
|
- (bit 1) anonymous shared memory
|
|
- (bit 2) file-backed private memory
|
|
- (bit 3) file-backed shared memory
|
|
- (bit 4) ELF header pages in file-backed private memory areas (it is
|
|
effective only if the bit 2 is cleared)
|
|
- (bit 5) hugetlb private memory
|
|
- (bit 6) hugetlb shared memory
|
|
- (bit 7) DAX private memory
|
|
- (bit 8) DAX shared memory
|
|
|
|
Note that MMIO pages such as frame buffer are never dumped and vDSO pages
|
|
are always dumped regardless of the bitmask status.
|
|
|
|
Note that bits 0-4 don't affect hugetlb or DAX memory. hugetlb memory is
|
|
only affected by bit 5-6, and DAX is only affected by bits 7-8.
|
|
|
|
The default value of coredump_filter is 0x33; this means all anonymous memory
|
|
segments, ELF header pages and hugetlb private memory are dumped.
|
|
|
|
If you don't want to dump all shared memory segments attached to pid 1234,
|
|
write 0x31 to the process's proc file::
|
|
|
|
$ echo 0x31 > /proc/1234/coredump_filter
|
|
|
|
When a new process is created, the process inherits the bitmask status from its
|
|
parent. It is useful to set up coredump_filter before the program runs.
|
|
For example::
|
|
|
|
$ echo 0x7 > /proc/self/coredump_filter
|
|
$ ./some_program
|
|
|
|
3.5 /proc/<pid>/mountinfo - Information about mounts
|
|
--------------------------------------------------------
|
|
|
|
This file contains lines of the form::
|
|
|
|
36 35 98:0 /mnt1 /mnt2 rw,noatime master:1 - ext3 /dev/root rw,errors=continue
|
|
(1)(2)(3) (4) (5) (6) (n…m) (m+1)(m+2) (m+3) (m+4)
|
|
|
|
(1) mount ID: unique identifier of the mount (may be reused after umount)
|
|
(2) parent ID: ID of parent (or of self for the top of the mount tree)
|
|
(3) major:minor: value of st_dev for files on filesystem
|
|
(4) root: root of the mount within the filesystem
|
|
(5) mount point: mount point relative to the process's root
|
|
(6) mount options: per mount options
|
|
(n…m) optional fields: zero or more fields of the form "tag[:value]"
|
|
(m+1) separator: marks the end of the optional fields
|
|
(m+2) filesystem type: name of filesystem of the form "type[.subtype]"
|
|
(m+3) mount source: filesystem specific information or "none"
|
|
(m+4) super options: per super block options
|
|
|
|
Parsers should ignore all unrecognised optional fields. Currently the
|
|
possible optional fields are:
|
|
|
|
================ ==============================================================
|
|
shared:X mount is shared in peer group X
|
|
master:X mount is slave to peer group X
|
|
propagate_from:X mount is slave and receives propagation from peer group X [#]_
|
|
unbindable mount is unbindable
|
|
================ ==============================================================
|
|
|
|
.. [#] X is the closest dominant peer group under the process's root. If
|
|
X is the immediate master of the mount, or if there's no dominant peer
|
|
group under the same root, then only the "master:X" field is present
|
|
and not the "propagate_from:X" field.
|
|
|
|
For more information on mount propagation see:
|
|
|
|
Documentation/filesystems/sharedsubtree.rst
|
|
|
|
|
|
3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
|
|
--------------------------------------------------------
|
|
These files provide a method to access a task's comm value. It also allows for
|
|
a task to set its own or one of its thread siblings comm value. The comm value
|
|
is limited in size compared to the cmdline value, so writing anything longer
|
|
then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
|
|
comm value.
|
|
|
|
|
|
3.7 /proc/<pid>/task/<tid>/children - Information about task children
|
|
-------------------------------------------------------------------------
|
|
This file provides a fast way to retrieve first level children pids
|
|
of a task pointed by <pid>/<tid> pair. The format is a space separated
|
|
stream of pids.
|
|
|
|
Note the "first level" here -- if a child has its own children they will
|
|
not be listed here; one needs to read /proc/<children-pid>/task/<tid>/children
|
|
to obtain the descendants.
|
|
|
|
Since this interface is intended to be fast and cheap it doesn't
|
|
guarantee to provide precise results and some children might be
|
|
skipped, especially if they've exited right after we printed their
|
|
pids, so one needs to either stop or freeze processes being inspected
|
|
if precise results are needed.
|
|
|
|
|
|
3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
|
|
---------------------------------------------------------------
|
|
This file provides information associated with an opened file. The regular
|
|
files have at least four fields -- 'pos', 'flags', 'mnt_id' and 'ino'.
|
|
The 'pos' represents the current offset of the opened file in decimal
|
|
form [see lseek(2) for details], 'flags' denotes the octal O_xxx mask the
|
|
file has been created with [see open(2) for details] and 'mnt_id' represents
|
|
mount ID of the file system containing the opened file [see 3.5
|
|
/proc/<pid>/mountinfo for details]. 'ino' represents the inode number of
|
|
the file.
|
|
|
|
A typical output is::
|
|
|
|
pos: 0
|
|
flags: 0100002
|
|
mnt_id: 19
|
|
ino: 63107
|
|
|
|
All locks associated with a file descriptor are shown in its fdinfo too::
|
|
|
|
lock: 1: FLOCK ADVISORY WRITE 359 00:13:11691 0 EOF
|
|
|
|
The files such as eventfd, fsnotify, signalfd, epoll among the regular pos/flags
|
|
pair provide additional information particular to the objects they represent.
|
|
|
|
Eventfd files
|
|
~~~~~~~~~~~~~
|
|
|
|
::
|
|
|
|
pos: 0
|
|
flags: 04002
|
|
mnt_id: 9
|
|
ino: 63107
|
|
eventfd-count: 5a
|
|
|
|
where 'eventfd-count' is hex value of a counter.
|
|
|
|
Signalfd files
|
|
~~~~~~~~~~~~~~
|
|
|
|
::
|
|
|
|
pos: 0
|
|
flags: 04002
|
|
mnt_id: 9
|
|
ino: 63107
|
|
sigmask: 0000000000000200
|
|
|
|
where 'sigmask' is hex value of the signal mask associated
|
|
with a file.
|
|
|
|
Epoll files
|
|
~~~~~~~~~~~
|
|
|
|
::
|
|
|
|
pos: 0
|
|
flags: 02
|
|
mnt_id: 9
|
|
ino: 63107
|
|
tfd: 5 events: 1d data: ffffffffffffffff pos:0 ino:61af sdev:7
|
|
|
|
where 'tfd' is a target file descriptor number in decimal form,
|
|
'events' is events mask being watched and the 'data' is data
|
|
associated with a target [see epoll(7) for more details].
|
|
|
|
The 'pos' is current offset of the target file in decimal form
|
|
[see lseek(2)], 'ino' and 'sdev' are inode and device numbers
|
|
where target file resides, all in hex format.
|
|
|
|
Fsnotify files
|
|
~~~~~~~~~~~~~~
|
|
For inotify files the format is the following::
|
|
|
|
pos: 0
|
|
flags: 02000000
|
|
mnt_id: 9
|
|
ino: 63107
|
|
inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
|
|
|
|
where 'wd' is a watch descriptor in decimal form, i.e. a target file
|
|
descriptor number, 'ino' and 'sdev' are inode and device where the
|
|
target file resides and the 'mask' is the mask of events, all in hex
|
|
form [see inotify(7) for more details].
|
|
|
|
If the kernel was built with exportfs support, the path to the target
|
|
file is encoded as a file handle. The file handle is provided by three
|
|
fields 'fhandle-bytes', 'fhandle-type' and 'f_handle', all in hex
|
|
format.
|
|
|
|
If the kernel is built without exportfs support the file handle won't be
|
|
printed out.
|
|
|
|
If there is no inotify mark attached yet the 'inotify' line will be omitted.
|
|
|
|
For fanotify files the format is::
|
|
|
|
pos: 0
|
|
flags: 02
|
|
mnt_id: 9
|
|
ino: 63107
|
|
fanotify flags:10 event-flags:0
|
|
fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
|
|
fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
|
|
|
|
where fanotify 'flags' and 'event-flags' are values used in fanotify_init
|
|
call, 'mnt_id' is the mount point identifier, 'mflags' is the value of
|
|
flags associated with mark which are tracked separately from events
|
|
mask. 'ino' and 'sdev' are target inode and device, 'mask' is the events
|
|
mask and 'ignored_mask' is the mask of events which are to be ignored.
|
|
All are in hex format. Incorporation of 'mflags', 'mask' and 'ignored_mask'
|
|
provide information about flags and mask used in fanotify_mark
|
|
call [see fsnotify manpage for details].
|
|
|
|
While the first three lines are mandatory and always printed, the rest is
|
|
optional and may be omitted if no marks created yet.
|
|
|
|
Timerfd files
|
|
~~~~~~~~~~~~~
|
|
|
|
::
|
|
|
|
pos: 0
|
|
flags: 02
|
|
mnt_id: 9
|
|
ino: 63107
|
|
clockid: 0
|
|
ticks: 0
|
|
settime flags: 01
|
|
it_value: (0, 49406829)
|
|
it_interval: (1, 0)
|
|
|
|
where 'clockid' is the clock type and 'ticks' is the number of the timer expirations
|
|
that have occurred [see timerfd_create(2) for details]. 'settime flags' are
|
|
flags in octal form been used to setup the timer [see timerfd_settime(2) for
|
|
details]. 'it_value' is remaining time until the timer expiration.
|
|
'it_interval' is the interval for the timer. Note the timer might be set up
|
|
with TIMER_ABSTIME option which will be shown in 'settime flags', but 'it_value'
|
|
still exhibits timer's remaining time.
|
|
|
|
DMA Buffer files
|
|
~~~~~~~~~~~~~~~~
|
|
|
|
::
|
|
|
|
pos: 0
|
|
flags: 04002
|
|
mnt_id: 9
|
|
ino: 63107
|
|
size: 32768
|
|
count: 2
|
|
exp_name: system-heap
|
|
|
|
where 'size' is the size of the DMA buffer in bytes. 'count' is the file count of
|
|
the DMA buffer file. 'exp_name' is the name of the DMA buffer exporter.
|
|
|
|
3.9 /proc/<pid>/map_files - Information about memory mapped files
|
|
---------------------------------------------------------------------
|
|
This directory contains symbolic links which represent memory mapped files
|
|
the process is maintaining. Example output::
|
|
|
|
| lr-------- 1 root root 64 Jan 27 11:24 333c600000-333c620000 -> /usr/lib64/ld-2.18.so
|
|
| lr-------- 1 root root 64 Jan 27 11:24 333c81f000-333c820000 -> /usr/lib64/ld-2.18.so
|
|
| lr-------- 1 root root 64 Jan 27 11:24 333c820000-333c821000 -> /usr/lib64/ld-2.18.so
|
|
| ...
|
|
| lr-------- 1 root root 64 Jan 27 11:24 35d0421000-35d0422000 -> /usr/lib64/libselinux.so.1
|
|
| lr-------- 1 root root 64 Jan 27 11:24 400000-41a000 -> /usr/bin/ls
|
|
|
|
The name of a link represents the virtual memory bounds of a mapping, i.e.
|
|
vm_area_struct::vm_start-vm_area_struct::vm_end.
|
|
|
|
The main purpose of the map_files is to retrieve a set of memory mapped
|
|
files in a fast way instead of parsing /proc/<pid>/maps or
|
|
/proc/<pid>/smaps, both of which contain many more records. At the same
|
|
time one can open(2) mappings from the listings of two processes and
|
|
comparing their inode numbers to figure out which anonymous memory areas
|
|
are actually shared.
|
|
|
|
3.10 /proc/<pid>/timerslack_ns - Task timerslack value
|
|
---------------------------------------------------------
|
|
This file provides the value of the task's timerslack value in nanoseconds.
|
|
This value specifies an amount of time that normal timers may be deferred
|
|
in order to coalesce timers and avoid unnecessary wakeups.
|
|
|
|
This allows a task's interactivity vs power consumption tradeoff to be
|
|
adjusted.
|
|
|
|
Writing 0 to the file will set the task's timerslack to the default value.
|
|
|
|
Valid values are from 0 - ULLONG_MAX
|
|
|
|
An application setting the value must have PTRACE_MODE_ATTACH_FSCREDS level
|
|
permissions on the task specified to change its timerslack_ns value.
|
|
|
|
3.11 /proc/<pid>/patch_state - Livepatch patch operation state
|
|
-----------------------------------------------------------------
|
|
When CONFIG_LIVEPATCH is enabled, this file displays the value of the
|
|
patch state for the task.
|
|
|
|
A value of '-1' indicates that no patch is in transition.
|
|
|
|
A value of '0' indicates that a patch is in transition and the task is
|
|
unpatched. If the patch is being enabled, then the task hasn't been
|
|
patched yet. If the patch is being disabled, then the task has already
|
|
been unpatched.
|
|
|
|
A value of '1' indicates that a patch is in transition and the task is
|
|
patched. If the patch is being enabled, then the task has already been
|
|
patched. If the patch is being disabled, then the task hasn't been
|
|
unpatched yet.
|
|
|
|
3.12 /proc/<pid>/arch_status - task architecture specific status
|
|
-------------------------------------------------------------------
|
|
When CONFIG_PROC_PID_ARCH_STATUS is enabled, this file displays the
|
|
architecture specific status of the task.
|
|
|
|
Example
|
|
~~~~~~~
|
|
|
|
::
|
|
|
|
$ cat /proc/6753/arch_status
|
|
AVX512_elapsed_ms: 8
|
|
|
|
Description
|
|
~~~~~~~~~~~
|
|
|
|
x86 specific entries
|
|
~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
AVX512_elapsed_ms
|
|
^^^^^^^^^^^^^^^^^^
|
|
|
|
If AVX512 is supported on the machine, this entry shows the milliseconds
|
|
elapsed since the last time AVX512 usage was recorded. The recording
|
|
happens on a best effort basis when a task is scheduled out. This means
|
|
that the value depends on two factors:
|
|
|
|
1) The time which the task spent on the CPU without being scheduled
|
|
out. With CPU isolation and a single runnable task this can take
|
|
several seconds.
|
|
|
|
2) The time since the task was scheduled out last. Depending on the
|
|
reason for being scheduled out (time slice exhausted, syscall ...)
|
|
this can be arbitrary long time.
|
|
|
|
As a consequence the value cannot be considered precise and authoritative
|
|
information. The application which uses this information has to be aware
|
|
of the overall scenario on the system in order to determine whether a
|
|
task is a real AVX512 user or not. Precise information can be obtained
|
|
with performance counters.
|
|
|
|
A special value of '-1' indicates that no AVX512 usage was recorded, thus
|
|
the task is unlikely an AVX512 user, but depends on the workload and the
|
|
scheduling scenario, it also could be a false negative mentioned above.
|
|
|
|
3.13 /proc/<pid>/fd - List of symlinks to open files
|
|
-------------------------------------------------------
|
|
This directory contains symbolic links which represent open files
|
|
the process is maintaining. Example output::
|
|
|
|
lr-x------ 1 root root 64 Sep 20 17:53 0 -> /dev/null
|
|
l-wx------ 1 root root 64 Sep 20 17:53 1 -> /dev/null
|
|
lrwx------ 1 root root 64 Sep 20 17:53 10 -> 'socket:[12539]'
|
|
lrwx------ 1 root root 64 Sep 20 17:53 11 -> 'socket:[12540]'
|
|
lrwx------ 1 root root 64 Sep 20 17:53 12 -> 'socket:[12542]'
|
|
|
|
The number of open files for the process is stored in 'size' member
|
|
of stat() output for /proc/<pid>/fd for fast access.
|
|
-------------------------------------------------------
|
|
|
|
|
|
Chapter 4: Configuring procfs
|
|
=============================
|
|
|
|
4.1 Mount options
|
|
---------------------
|
|
|
|
The following mount options are supported:
|
|
|
|
========= ========================================================
|
|
hidepid= Set /proc/<pid>/ access mode.
|
|
gid= Set the group authorized to learn processes information.
|
|
subset= Show only the specified subset of procfs.
|
|
========= ========================================================
|
|
|
|
hidepid=off or hidepid=0 means classic mode - everybody may access all
|
|
/proc/<pid>/ directories (default).
|
|
|
|
hidepid=noaccess or hidepid=1 means users may not access any /proc/<pid>/
|
|
directories but their own. Sensitive files like cmdline, sched*, status are now
|
|
protected against other users. This makes it impossible to learn whether any
|
|
user runs specific program (given the program doesn't reveal itself by its
|
|
behaviour). As an additional bonus, as /proc/<pid>/cmdline is unaccessible for
|
|
other users, poorly written programs passing sensitive information via program
|
|
arguments are now protected against local eavesdroppers.
|
|
|
|
hidepid=invisible or hidepid=2 means hidepid=1 plus all /proc/<pid>/ will be
|
|
fully invisible to other users. It doesn't mean that it hides a fact whether a
|
|
process with a specific pid value exists (it can be learned by other means, e.g.
|
|
by "kill -0 $PID"), but it hides process' uid and gid, which may be learned by
|
|
stat()'ing /proc/<pid>/ otherwise. It greatly complicates an intruder's task of
|
|
gathering information about running processes, whether some daemon runs with
|
|
elevated privileges, whether other user runs some sensitive program, whether
|
|
other users run any program at all, etc.
|
|
|
|
hidepid=ptraceable or hidepid=4 means that procfs should only contain
|
|
/proc/<pid>/ directories that the caller can ptrace.
|
|
|
|
gid= defines a group authorized to learn processes information otherwise
|
|
prohibited by hidepid=. If you use some daemon like identd which needs to learn
|
|
information about processes information, just add identd to this group.
|
|
|
|
subset=pid hides all top level files and directories in the procfs that
|
|
are not related to tasks.
|
|
|
|
Chapter 5: Filesystem behavior
|
|
==============================
|
|
|
|
Originally, before the advent of pid namepsace, procfs was a global file
|
|
system. It means that there was only one procfs instance in the system.
|
|
|
|
When pid namespace was added, a separate procfs instance was mounted in
|
|
each pid namespace. So, procfs mount options are global among all
|
|
mountpoints within the same namespace::
|
|
|
|
# grep ^proc /proc/mounts
|
|
proc /proc proc rw,relatime,hidepid=2 0 0
|
|
|
|
# strace -e mount mount -o hidepid=1 -t proc proc /tmp/proc
|
|
mount("proc", "/tmp/proc", "proc", 0, "hidepid=1") = 0
|
|
+++ exited with 0 +++
|
|
|
|
# grep ^proc /proc/mounts
|
|
proc /proc proc rw,relatime,hidepid=2 0 0
|
|
proc /tmp/proc proc rw,relatime,hidepid=2 0 0
|
|
|
|
and only after remounting procfs mount options will change at all
|
|
mountpoints::
|
|
|
|
# mount -o remount,hidepid=1 -t proc proc /tmp/proc
|
|
|
|
# grep ^proc /proc/mounts
|
|
proc /proc proc rw,relatime,hidepid=1 0 0
|
|
proc /tmp/proc proc rw,relatime,hidepid=1 0 0
|
|
|
|
This behavior is different from the behavior of other filesystems.
|
|
|
|
The new procfs behavior is more like other filesystems. Each procfs mount
|
|
creates a new procfs instance. Mount options affect own procfs instance.
|
|
It means that it became possible to have several procfs instances
|
|
displaying tasks with different filtering options in one pid namespace::
|
|
|
|
# mount -o hidepid=invisible -t proc proc /proc
|
|
# mount -o hidepid=noaccess -t proc proc /tmp/proc
|
|
# grep ^proc /proc/mounts
|
|
proc /proc proc rw,relatime,hidepid=invisible 0 0
|
|
proc /tmp/proc proc rw,relatime,hidepid=noaccess 0 0
|