mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 02:04:19 +08:00
2f51a26041
Buck10 is a multi(dual) phase regulator. So as part of enabling it turn on the LP87565_BUCK_CTRL_1_FPWM_MP_0_2 bit which forces it to operate always in multiphase and forced-PWM operation mode. This helps improve the transient voltage response while switching OPP. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
242 lines
7.1 KiB
C
242 lines
7.1 KiB
C
/*
|
|
* Regulator driver for LP87565 PMIC
|
|
*
|
|
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation version 2.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/mfd/lp87565.h>
|
|
|
|
#define LP87565_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
|
|
_delay, _lr, _cr) \
|
|
[_id] = { \
|
|
.desc = { \
|
|
.name = _name, \
|
|
.supply_name = _of "-in", \
|
|
.id = _id, \
|
|
.of_match = of_match_ptr(_of), \
|
|
.regulators_node = of_match_ptr("regulators"),\
|
|
.ops = &_ops, \
|
|
.n_voltages = _n, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.vsel_reg = _vr, \
|
|
.vsel_mask = _vm, \
|
|
.enable_reg = _er, \
|
|
.enable_mask = _em, \
|
|
.ramp_delay = _delay, \
|
|
.linear_ranges = _lr, \
|
|
.n_linear_ranges = ARRAY_SIZE(_lr), \
|
|
}, \
|
|
.ctrl2_reg = _cr, \
|
|
}
|
|
|
|
struct lp87565_regulator {
|
|
struct regulator_desc desc;
|
|
unsigned int ctrl2_reg;
|
|
};
|
|
|
|
static const struct lp87565_regulator regulators[];
|
|
|
|
static const struct regulator_linear_range buck0_1_2_3_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(600000, 0xA, 0x17, 10000),
|
|
REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
|
|
REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
|
|
};
|
|
|
|
static unsigned int lp87565_buck_ramp_delay[] = {
|
|
30000, 15000, 10000, 7500, 3800, 1900, 940, 470
|
|
};
|
|
|
|
/* LP87565 BUCK current limit */
|
|
static const unsigned int lp87565_buck_uA[] = {
|
|
1500000, 2000000, 2500000, 3000000, 3500000, 4000000, 4500000, 5000000,
|
|
};
|
|
|
|
static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
|
|
int ramp_delay)
|
|
{
|
|
int id = rdev_get_id(rdev);
|
|
struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
|
|
unsigned int reg;
|
|
int ret;
|
|
|
|
if (ramp_delay <= 470)
|
|
reg = 7;
|
|
else if (ramp_delay <= 940)
|
|
reg = 6;
|
|
else if (ramp_delay <= 1900)
|
|
reg = 5;
|
|
else if (ramp_delay <= 3800)
|
|
reg = 4;
|
|
else if (ramp_delay <= 7500)
|
|
reg = 3;
|
|
else if (ramp_delay <= 10000)
|
|
reg = 2;
|
|
else if (ramp_delay <= 15000)
|
|
reg = 1;
|
|
else
|
|
reg = 0;
|
|
|
|
ret = regmap_update_bits(lp87565->regmap, regulators[id].ctrl2_reg,
|
|
LP87565_BUCK_CTRL_2_SLEW_RATE,
|
|
reg << __ffs(LP87565_BUCK_CTRL_2_SLEW_RATE));
|
|
if (ret) {
|
|
dev_err(lp87565->dev, "SLEW RATE write failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
rdev->constraints->ramp_delay = lp87565_buck_ramp_delay[reg];
|
|
|
|
/* Conservatively give a 15% margin */
|
|
rdev->constraints->ramp_delay =
|
|
rdev->constraints->ramp_delay * 85 / 100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lp87565_buck_set_current_limit(struct regulator_dev *rdev,
|
|
int min_uA, int max_uA)
|
|
{
|
|
int id = rdev_get_id(rdev);
|
|
struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
|
|
int i;
|
|
|
|
for (i = ARRAY_SIZE(lp87565_buck_uA) - 1; i >= 0; i--) {
|
|
if (lp87565_buck_uA[i] >= min_uA &&
|
|
lp87565_buck_uA[i] <= max_uA)
|
|
return regmap_update_bits(lp87565->regmap,
|
|
regulators[id].ctrl2_reg,
|
|
LP87565_BUCK_CTRL_2_ILIM,
|
|
i << __ffs(LP87565_BUCK_CTRL_2_ILIM));
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int lp87565_buck_get_current_limit(struct regulator_dev *rdev)
|
|
{
|
|
int id = rdev_get_id(rdev);
|
|
struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
|
|
int ret;
|
|
unsigned int val;
|
|
|
|
ret = regmap_read(lp87565->regmap, regulators[id].ctrl2_reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = (val & LP87565_BUCK_CTRL_2_ILIM) >>
|
|
__ffs(LP87565_BUCK_CTRL_2_ILIM);
|
|
|
|
return (val < ARRAY_SIZE(lp87565_buck_uA)) ?
|
|
lp87565_buck_uA[val] : -EINVAL;
|
|
}
|
|
|
|
/* Operations permitted on BUCK0, BUCK1 */
|
|
static struct regulator_ops lp87565_buck_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_ramp_delay = lp87565_buck_set_ramp_delay,
|
|
.set_current_limit = lp87565_buck_set_current_limit,
|
|
.get_current_limit = lp87565_buck_get_current_limit,
|
|
};
|
|
|
|
static const struct lp87565_regulator regulators[] = {
|
|
LP87565_REGULATOR("BUCK0", LP87565_BUCK_0, "buck0", lp87565_buck_ops,
|
|
256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET,
|
|
LP87565_REG_BUCK0_CTRL_1,
|
|
LP87565_BUCK_CTRL_1_EN, 3230,
|
|
buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
|
|
LP87565_REGULATOR("BUCK1", LP87565_BUCK_1, "buck1", lp87565_buck_ops,
|
|
256, LP87565_REG_BUCK1_VOUT, LP87565_BUCK_VSET,
|
|
LP87565_REG_BUCK1_CTRL_1,
|
|
LP87565_BUCK_CTRL_1_EN, 3230,
|
|
buck0_1_2_3_ranges, LP87565_REG_BUCK1_CTRL_2),
|
|
LP87565_REGULATOR("BUCK2", LP87565_BUCK_2, "buck2", lp87565_buck_ops,
|
|
256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET,
|
|
LP87565_REG_BUCK2_CTRL_1,
|
|
LP87565_BUCK_CTRL_1_EN, 3230,
|
|
buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2),
|
|
LP87565_REGULATOR("BUCK3", LP87565_BUCK_3, "buck3", lp87565_buck_ops,
|
|
256, LP87565_REG_BUCK3_VOUT, LP87565_BUCK_VSET,
|
|
LP87565_REG_BUCK3_CTRL_1,
|
|
LP87565_BUCK_CTRL_1_EN, 3230,
|
|
buck0_1_2_3_ranges, LP87565_REG_BUCK3_CTRL_2),
|
|
LP87565_REGULATOR("BUCK10", LP87565_BUCK_10, "buck10", lp87565_buck_ops,
|
|
256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET,
|
|
LP87565_REG_BUCK0_CTRL_1,
|
|
LP87565_BUCK_CTRL_1_EN |
|
|
LP87565_BUCK_CTRL_1_FPWM_MP_0_2, 3230,
|
|
buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
|
|
LP87565_REGULATOR("BUCK23", LP87565_BUCK_23, "buck23", lp87565_buck_ops,
|
|
256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET,
|
|
LP87565_REG_BUCK2_CTRL_1,
|
|
LP87565_BUCK_CTRL_1_EN, 3230,
|
|
buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2),
|
|
};
|
|
|
|
static int lp87565_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct lp87565 *lp87565 = dev_get_drvdata(pdev->dev.parent);
|
|
struct regulator_config config = { };
|
|
struct regulator_dev *rdev;
|
|
int i, min_idx = LP87565_BUCK_1, max_idx = LP87565_BUCK_3;
|
|
|
|
platform_set_drvdata(pdev, lp87565);
|
|
|
|
config.dev = &pdev->dev;
|
|
config.dev->of_node = lp87565->dev->of_node;
|
|
config.driver_data = lp87565;
|
|
config.regmap = lp87565->regmap;
|
|
|
|
if (lp87565->dev_type == LP87565_DEVICE_TYPE_LP87565_Q1) {
|
|
min_idx = LP87565_BUCK_10;
|
|
max_idx = LP87565_BUCK_23;
|
|
}
|
|
|
|
for (i = min_idx; i <= max_idx; i++) {
|
|
rdev = devm_regulator_register(&pdev->dev, ®ulators[i].desc,
|
|
&config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(lp87565->dev, "failed to register %s regulator\n",
|
|
pdev->name);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id lp87565_regulator_id_table[] = {
|
|
{ "lp87565-regulator", },
|
|
{ "lp87565-q1-regulator", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, lp87565_regulator_id_table);
|
|
|
|
static struct platform_driver lp87565_regulator_driver = {
|
|
.driver = {
|
|
.name = "lp87565-pmic",
|
|
},
|
|
.probe = lp87565_regulator_probe,
|
|
.id_table = lp87565_regulator_id_table,
|
|
};
|
|
module_platform_driver(lp87565_regulator_driver);
|
|
|
|
MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
|
|
MODULE_DESCRIPTION("LP87565 voltage regulator driver");
|
|
MODULE_LICENSE("GPL v2");
|