mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 16:24:13 +08:00
8846739f52
Add a driver for the QiHeng Electronics ch341a USB-to-SPI adapter. This driver is loosely based on the ch341a module from the flashrom project. Signed-off-by: Johannes Thumshirn <jth@kernel.org> Link: https://patch.msgid.link/20240708-spi-ch341a-v3-1-cf7f9b2c1e31@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
242 lines
5.9 KiB
C
242 lines
5.9 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// QiHeng Electronics ch341a USB-to-SPI adapter driver
|
|
//
|
|
// Copyright (C) 2024 Johannes Thumshirn <jth@kernel.org>
|
|
//
|
|
// Based on ch341a_spi.c from the flashrom project.
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#define CH341_PACKET_LENGTH 32
|
|
#define CH341_DEFAULT_TIMEOUT 1000
|
|
|
|
#define CH341A_CMD_UIO_STREAM 0xab
|
|
|
|
#define CH341A_CMD_UIO_STM_END 0x20
|
|
#define CH341A_CMD_UIO_STM_DIR 0x40
|
|
#define CH341A_CMD_UIO_STM_OUT 0x80
|
|
|
|
#define CH341A_CMD_I2C_STREAM 0xaa
|
|
#define CH341A_CMD_I2C_STM_SET 0x60
|
|
#define CH341A_CMD_I2C_STM_END 0x00
|
|
|
|
#define CH341A_CMD_SPI_STREAM 0xa8
|
|
|
|
#define CH341A_STM_I2C_100K 0x01
|
|
|
|
struct ch341_spi_dev {
|
|
struct spi_controller *ctrl;
|
|
struct usb_device *udev;
|
|
unsigned int write_pipe;
|
|
unsigned int read_pipe;
|
|
int rx_len;
|
|
void *rx_buf;
|
|
u8 *tx_buf;
|
|
struct urb *rx_urb;
|
|
struct spi_device *spidev;
|
|
};
|
|
|
|
static void ch341_set_cs(struct spi_device *spi, bool is_high)
|
|
{
|
|
struct ch341_spi_dev *ch341 =
|
|
spi_controller_get_devdata(spi->controller);
|
|
int err;
|
|
|
|
memset(ch341->tx_buf, 0, CH341_PACKET_LENGTH);
|
|
ch341->tx_buf[0] = CH341A_CMD_UIO_STREAM;
|
|
ch341->tx_buf[1] = CH341A_CMD_UIO_STM_OUT | (is_high ? 0x36 : 0x37);
|
|
|
|
if (is_high) {
|
|
ch341->tx_buf[2] = CH341A_CMD_UIO_STM_DIR | 0x3f;
|
|
ch341->tx_buf[3] = CH341A_CMD_UIO_STM_END;
|
|
} else {
|
|
ch341->tx_buf[2] = CH341A_CMD_UIO_STM_END;
|
|
}
|
|
|
|
err = usb_bulk_msg(ch341->udev, ch341->write_pipe, ch341->tx_buf,
|
|
(is_high ? 4 : 3), NULL, CH341_DEFAULT_TIMEOUT);
|
|
if (err)
|
|
dev_err(&spi->dev,
|
|
"error sending USB message for setting CS (%d)\n", err);
|
|
}
|
|
|
|
static int ch341_transfer_one(struct spi_controller *host,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *trans)
|
|
{
|
|
struct ch341_spi_dev *ch341 =
|
|
spi_controller_get_devdata(spi->controller);
|
|
int len;
|
|
int ret;
|
|
|
|
len = min(CH341_PACKET_LENGTH, trans->len + 1);
|
|
|
|
memset(ch341->tx_buf, 0, CH341_PACKET_LENGTH);
|
|
|
|
ch341->tx_buf[0] = CH341A_CMD_SPI_STREAM;
|
|
|
|
memcpy(ch341->tx_buf + 1, trans->tx_buf, len);
|
|
|
|
ret = usb_bulk_msg(ch341->udev, ch341->write_pipe, ch341->tx_buf, len,
|
|
NULL, CH341_DEFAULT_TIMEOUT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return usb_bulk_msg(ch341->udev, ch341->read_pipe, trans->rx_buf,
|
|
len - 1, NULL, CH341_DEFAULT_TIMEOUT);
|
|
}
|
|
|
|
static void ch341_recv(struct urb *urb)
|
|
{
|
|
struct ch341_spi_dev *ch341 = urb->context;
|
|
struct usb_device *udev = ch341->udev;
|
|
|
|
switch (urb->status) {
|
|
case 0:
|
|
/* success */
|
|
break;
|
|
case -ENOENT:
|
|
case -ECONNRESET:
|
|
case -EPIPE:
|
|
case -ESHUTDOWN:
|
|
dev_dbg(&udev->dev, "rx urb terminated with status: %d\n",
|
|
urb->status);
|
|
return;
|
|
default:
|
|
dev_dbg(&udev->dev, "rx urb error: %d\n", urb->status);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int ch341_config_stream(struct ch341_spi_dev *ch341)
|
|
{
|
|
memset(ch341->tx_buf, 0, CH341_PACKET_LENGTH);
|
|
ch341->tx_buf[0] = CH341A_CMD_I2C_STREAM;
|
|
ch341->tx_buf[1] = CH341A_CMD_I2C_STM_SET | CH341A_STM_I2C_100K;
|
|
ch341->tx_buf[2] = CH341A_CMD_I2C_STM_END;
|
|
|
|
return usb_bulk_msg(ch341->udev, ch341->write_pipe, ch341->tx_buf, 3,
|
|
NULL, CH341_DEFAULT_TIMEOUT);
|
|
}
|
|
|
|
static int ch341_enable_pins(struct ch341_spi_dev *ch341, bool enable)
|
|
{
|
|
memset(ch341->tx_buf, 0, CH341_PACKET_LENGTH);
|
|
ch341->tx_buf[0] = CH341A_CMD_UIO_STREAM;
|
|
ch341->tx_buf[1] = CH341A_CMD_UIO_STM_OUT | 0x37;
|
|
ch341->tx_buf[2] = CH341A_CMD_UIO_STM_DIR | (enable ? 0x3f : 0x00);
|
|
ch341->tx_buf[3] = CH341A_CMD_UIO_STM_END;
|
|
|
|
return usb_bulk_msg(ch341->udev, ch341->write_pipe, ch341->tx_buf, 4,
|
|
NULL, CH341_DEFAULT_TIMEOUT);
|
|
}
|
|
|
|
static struct spi_board_info chip = {
|
|
.modalias = "spi-ch341a",
|
|
};
|
|
|
|
static int ch341_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *udev = interface_to_usbdev(intf);
|
|
struct usb_endpoint_descriptor *in, *out;
|
|
struct ch341_spi_dev *ch341;
|
|
struct spi_controller *ctrl;
|
|
int ret;
|
|
|
|
ret = usb_find_common_endpoints(intf->cur_altsetting, &in, &out, NULL,
|
|
NULL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ctrl = devm_spi_alloc_master(&udev->dev, sizeof(struct ch341_spi_dev));
|
|
if (!ctrl)
|
|
return -ENOMEM;
|
|
|
|
ch341 = spi_controller_get_devdata(ctrl);
|
|
ch341->ctrl = ctrl;
|
|
ch341->udev = udev;
|
|
ch341->write_pipe = usb_sndbulkpipe(udev, usb_endpoint_num(out));
|
|
ch341->read_pipe = usb_rcvbulkpipe(udev, usb_endpoint_num(in));
|
|
|
|
ch341->rx_len = usb_endpoint_maxp(in);
|
|
ch341->rx_buf = devm_kzalloc(&udev->dev, ch341->rx_len, GFP_KERNEL);
|
|
if (!ch341->rx_buf)
|
|
return -ENOMEM;
|
|
|
|
ch341->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!ch341->rx_urb)
|
|
return -ENOMEM;
|
|
|
|
ch341->tx_buf =
|
|
devm_kzalloc(&udev->dev, CH341_PACKET_LENGTH, GFP_KERNEL);
|
|
if (!ch341->tx_buf)
|
|
return -ENOMEM;
|
|
|
|
usb_fill_bulk_urb(ch341->rx_urb, udev, ch341->read_pipe, ch341->rx_buf,
|
|
ch341->rx_len, ch341_recv, ch341);
|
|
|
|
ret = usb_submit_urb(ch341->rx_urb, GFP_KERNEL);
|
|
if (ret) {
|
|
usb_free_urb(ch341->rx_urb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ctrl->bus_num = -1;
|
|
ctrl->mode_bits = SPI_CPHA;
|
|
ctrl->transfer_one = ch341_transfer_one;
|
|
ctrl->set_cs = ch341_set_cs;
|
|
ctrl->auto_runtime_pm = false;
|
|
|
|
usb_set_intfdata(intf, ch341);
|
|
|
|
ret = ch341_config_stream(ch341);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ch341_enable_pins(ch341, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = spi_register_controller(ctrl);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ch341->spidev = spi_new_device(ctrl, &chip);
|
|
if (!ch341->spidev)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ch341_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct ch341_spi_dev *ch341 = usb_get_intfdata(intf);
|
|
|
|
spi_unregister_device(ch341->spidev);
|
|
spi_unregister_controller(ch341->ctrl);
|
|
ch341_enable_pins(ch341, false);
|
|
usb_free_urb(ch341->rx_urb);
|
|
}
|
|
|
|
static const struct usb_device_id ch341_id_table[] = {
|
|
{ USB_DEVICE(0x1a86, 0x5512) },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, ch341_id_table);
|
|
|
|
static struct usb_driver ch341a_usb_driver = {
|
|
.name = "spi-ch341",
|
|
.probe = ch341_probe,
|
|
.disconnect = ch341_disconnect,
|
|
.id_table = ch341_id_table,
|
|
};
|
|
module_usb_driver(ch341a_usb_driver);
|
|
|
|
MODULE_AUTHOR("Johannes Thumshirn <jth@kernel.org>");
|
|
MODULE_DESCRIPTION("QiHeng Electronics ch341 USB2SPI");
|
|
MODULE_LICENSE("GPL v2");
|