mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 05:34:13 +08:00
6a794a27da
The Aspeed AST2x00 can contain a ColdFire v1 coprocessor which is currently unused on OpenPower systems. This adds an alternative to the fsi-master-gpio driver that uses that coprocessor instead of bit banging from the ARM core itself. The end result is about 4 times faster. The firmware for the coprocessor and its source code can be found at https://github.com/ozbenh/cf-fsi and is system specific. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
158 lines
4.7 KiB
C
158 lines
4.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
#ifndef __CF_FSI_FW_H
|
|
#define __CF_FSI_FW_H
|
|
|
|
/*
|
|
* uCode file layout
|
|
*
|
|
* 0000...03ff : m68k exception vectors
|
|
* 0400...04ff : Header info & boot config block
|
|
* 0500....... : Code & stack
|
|
*/
|
|
|
|
/*
|
|
* Header info & boot config area
|
|
*
|
|
* The Header info is built into the ucode and provide version and
|
|
* platform information.
|
|
*
|
|
* the Boot config needs to be adjusted by the ARM prior to starting
|
|
* the ucode if the Command/Status area isn't at 0x320000 in CF space
|
|
* (ie. beginning of SRAM).
|
|
*/
|
|
|
|
#define HDR_OFFSET 0x400
|
|
|
|
/* Info: Signature & version */
|
|
#define HDR_SYS_SIG 0x00 /* 2 bytes system signature */
|
|
#define SYS_SIG_SHARED 0x5348
|
|
#define SYS_SIG_SPLIT 0x5350
|
|
#define HDR_FW_VERS 0x02 /* 2 bytes Major.Minor */
|
|
#define HDR_API_VERS 0x04 /* 2 bytes Major.Minor */
|
|
#define API_VERSION_MAJ 2 /* Current version */
|
|
#define API_VERSION_MIN 1
|
|
#define HDR_FW_OPTIONS 0x08 /* 4 bytes option flags */
|
|
#define FW_OPTION_TRACE_EN 0x00000001 /* FW tracing enabled */
|
|
#define FW_OPTION_CONT_CLOCK 0x00000002 /* Continuous clocking supported */
|
|
#define HDR_FW_SIZE 0x10 /* 4 bytes size for combo image */
|
|
|
|
/* Boot Config: Address of Command/Status area */
|
|
#define HDR_CMD_STAT_AREA 0x80 /* 4 bytes CF address */
|
|
#define HDR_FW_CONTROL 0x84 /* 4 bytes control flags */
|
|
#define FW_CONTROL_CONT_CLOCK 0x00000002 /* Continuous clocking enabled */
|
|
#define FW_CONTROL_DUMMY_RD 0x00000004 /* Extra dummy read (AST2400) */
|
|
#define FW_CONTROL_USE_STOP 0x00000008 /* Use STOP instructions */
|
|
#define HDR_CLOCK_GPIO_VADDR 0x90 /* 2 bytes offset from GPIO base */
|
|
#define HDR_CLOCK_GPIO_DADDR 0x92 /* 2 bytes offset from GPIO base */
|
|
#define HDR_DATA_GPIO_VADDR 0x94 /* 2 bytes offset from GPIO base */
|
|
#define HDR_DATA_GPIO_DADDR 0x96 /* 2 bytes offset from GPIO base */
|
|
#define HDR_TRANS_GPIO_VADDR 0x98 /* 2 bytes offset from GPIO base */
|
|
#define HDR_TRANS_GPIO_DADDR 0x9a /* 2 bytes offset from GPIO base */
|
|
#define HDR_CLOCK_GPIO_BIT 0x9c /* 1 byte bit number */
|
|
#define HDR_DATA_GPIO_BIT 0x9d /* 1 byte bit number */
|
|
#define HDR_TRANS_GPIO_BIT 0x9e /* 1 byte bit number */
|
|
|
|
/*
|
|
* Command/Status area layout: Main part
|
|
*/
|
|
|
|
/* Command/Status register:
|
|
*
|
|
* +---------------------------+
|
|
* | STAT | RLEN | CLEN | CMD |
|
|
* | 8 | 8 | 8 | 8 |
|
|
* +---------------------------+
|
|
* | | | |
|
|
* status | | |
|
|
* Response len | |
|
|
* (in bits) | |
|
|
* | |
|
|
* Command len |
|
|
* (in bits) |
|
|
* |
|
|
* Command code
|
|
*
|
|
* Due to the big endian layout, that means that a byte read will
|
|
* return the status byte
|
|
*/
|
|
#define CMD_STAT_REG 0x00
|
|
#define CMD_REG_CMD_MASK 0x000000ff
|
|
#define CMD_REG_CMD_SHIFT 0
|
|
#define CMD_NONE 0x00
|
|
#define CMD_COMMAND 0x01
|
|
#define CMD_BREAK 0x02
|
|
#define CMD_IDLE_CLOCKS 0x03 /* clen = #clocks */
|
|
#define CMD_INVALID 0xff
|
|
#define CMD_REG_CLEN_MASK 0x0000ff00
|
|
#define CMD_REG_CLEN_SHIFT 8
|
|
#define CMD_REG_RLEN_MASK 0x00ff0000
|
|
#define CMD_REG_RLEN_SHIFT 16
|
|
#define CMD_REG_STAT_MASK 0xff000000
|
|
#define CMD_REG_STAT_SHIFT 24
|
|
#define STAT_WORKING 0x00
|
|
#define STAT_COMPLETE 0x01
|
|
#define STAT_ERR_INVAL_CMD 0x80
|
|
#define STAT_ERR_INVAL_IRQ 0x81
|
|
#define STAT_ERR_MTOE 0x82
|
|
|
|
/* Response tag & CRC */
|
|
#define STAT_RTAG 0x04
|
|
|
|
/* Response CRC */
|
|
#define STAT_RCRC 0x05
|
|
|
|
/* Echo and Send delay */
|
|
#define ECHO_DLY_REG 0x08
|
|
#define SEND_DLY_REG 0x09
|
|
|
|
/* Command data area
|
|
*
|
|
* Last byte of message must be left aligned
|
|
*/
|
|
#define CMD_DATA 0x10 /* 64 bit of data */
|
|
|
|
/* Response data area, right aligned, unused top bits are 1 */
|
|
#define RSP_DATA 0x20 /* 32 bit of data */
|
|
|
|
/* Misc */
|
|
#define INT_CNT 0x30 /* 32-bit interrupt count */
|
|
#define BAD_INT_VEC 0x34 /* 32-bit bad interrupt vector # */
|
|
#define CF_STARTED 0x38 /* byte, set to -1 when copro started */
|
|
#define CLK_CNT 0x3c /* 32-bit, clock count (debug only) */
|
|
|
|
/*
|
|
* SRAM layout: GPIO arbitration part
|
|
*/
|
|
#define ARB_REG 0x40
|
|
#define ARB_ARM_REQ 0x01
|
|
#define ARB_ARM_ACK 0x02
|
|
|
|
/* Misc2 */
|
|
#define CF_RESET_D0 0x50
|
|
#define CF_RESET_D1 0x54
|
|
#define BAD_INT_S0 0x58
|
|
#define BAD_INT_S1 0x5c
|
|
#define STOP_CNT 0x60
|
|
|
|
/* Internal */
|
|
|
|
/*
|
|
* SRAM layout: Trace buffer (debug builds only)
|
|
*/
|
|
#define TRACEBUF 0x100
|
|
#define TR_CLKOBIT0 0xc0
|
|
#define TR_CLKOBIT1 0xc1
|
|
#define TR_CLKOSTART 0x82
|
|
#define TR_OLEN 0x83 /* + len */
|
|
#define TR_CLKZ 0x84 /* + count */
|
|
#define TR_CLKWSTART 0x85
|
|
#define TR_CLKTAG 0x86 /* + tag */
|
|
#define TR_CLKDATA 0x87 /* + len */
|
|
#define TR_CLKCRC 0x88 /* + raw crc */
|
|
#define TR_CLKIBIT0 0x90
|
|
#define TR_CLKIBIT1 0x91
|
|
#define TR_END 0xff
|
|
|
|
#endif /* __CF_FSI_FW_H */
|
|
|