korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-20 10:44:23 +08:00
Code Issues Packages Projects Releases Wiki Activity
0b84caab36
linux/drivers/media/usb/em28xx/em28xx-dvb.c
Mauro Carvalho Chehab 385cd33c8d [media] em28xx-dvb: Don't put device in suspend mode at feed stop 
Putting em28xx in suspend mode when a feed stops is just plain
wrong. Every time a new PES filter is changed, the DVB demux
code will stop the current feed, and then start a new one.
If are there any code that switches off the frontend, via
some GPIO setting, this would make the DVB fail.
This condition was actually trigged with one device, during
DVB scan, as, during scan, it is common that userspace apps
to change the filter several times, in order to get all
tables.
Also, this is not needed at all, since the em28xx code already
hooks into ops.ts_bus_ctrl(). This warrants that em28xx can
check there if DVB frontend is in usage or not. The code there
already puts the device on suspend mode, if the DVB frontend
is not used (closed).

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-04 16:35:54 -03:00

1359 lines
34 KiB
C
Raw Blame History

/*
DVB device driver for em28xx
(c) 2008-2011 Mauro Carvalho Chehab <mchehab@infradead.org>
(c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com>
- Fixes for the driver to properly work with HVR-950
- Fixes for the driver to properly work with Pinnacle PCTV HD Pro Stick
- Fixes for the driver to properly work with AMD ATI TV Wonder HD 600
(c) 2008 Aidan Thornton <makosoft@googlemail.com>
(c) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
Based on cx88-dvb, saa7134-dvb and videobuf-dvb originally written by:
(c) 2004, 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au>
(c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include "em28xx.h"
#include <media/v4l2-common.h>
#include <dvb_demux.h>
#include <dvb_net.h>
#include <dmxdev.h>
#include <media/tuner.h>
#include "tuner-simple.h"
#include <linux/gpio.h>
#include "lgdt330x.h"
#include "lgdt3305.h"
#include "zl10353.h"
#include "s5h1409.h"
#include "mt352.h"
#include "mt352_priv.h" /* FIXME */
#include "tda1002x.h"
#include "tda18271.h"
#include "s921.h"
#include "drxd.h"
#include "cxd2820r.h"
#include "tda18271c2dd.h"
#include "drxk.h"
#include "tda10071.h"
#include "a8293.h"
#include "qt1010.h"
MODULE_DESCRIPTION("driver for em28xx based DVB cards");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
MODULE_LICENSE("GPL");
static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define dprintk(level, fmt, arg...) do { \
if (debug >= level) \
printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->name, ## arg); \
} while (0)
struct em28xx_dvb {
struct dvb_frontend *fe[2];
/* feed count management */
struct mutex lock;
int nfeeds;
/* general boilerplate stuff */
struct dvb_adapter adapter;
struct dvb_demux demux;
struct dmxdev dmxdev;
struct dmx_frontend fe_hw;
struct dmx_frontend fe_mem;
struct dvb_net net;
/* Due to DRX-K - probably need changes */
int (*gate_ctrl)(struct dvb_frontend *, int);
struct semaphore pll_mutex;
bool dont_attach_fe1;
int lna_gpio;
};
static inline void print_err_status(struct em28xx *dev,
int packet, int status)
{
char *errmsg = "Unknown";
switch (status) {
case -ENOENT:
errmsg = "unlinked synchronuously";
break;
case -ECONNRESET:
errmsg = "unlinked asynchronuously";
break;
case -ENOSR:
errmsg = "Buffer error (overrun)";
break;
case -EPIPE:
errmsg = "Stalled (device not responding)";
break;
case -EOVERFLOW:
errmsg = "Babble (bad cable?)";
break;
case -EPROTO:
errmsg = "Bit-stuff error (bad cable?)";
break;
case -EILSEQ:
errmsg = "CRC/Timeout (could be anything)";
break;
case -ETIME:
errmsg = "Device does not respond";
break;
}
if (packet < 0) {
dprintk(1, "URB status %d [%s].\n", status, errmsg);
} else {
dprintk(1, "URB packet %d, status %d [%s].\n",
packet, status, errmsg);
}
}
static inline int em28xx_dvb_urb_data_copy(struct em28xx *dev, struct urb *urb)
{
int xfer_bulk, num_packets, i;
if (!dev)
return 0;
if (dev->disconnected)
return 0;
if (urb->status < 0)
print_err_status(dev, -1, urb->status);
xfer_bulk = usb_pipebulk(urb->pipe);
if (xfer_bulk) /* bulk */
num_packets = 1;
else /* isoc */
num_packets = urb->number_of_packets;
for (i = 0; i < num_packets; i++) {
if (xfer_bulk) {
if (urb->status < 0) {
print_err_status(dev, i, urb->status);
if (urb->status != -EPROTO)
continue;
}
dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer,
urb->actual_length);
} else {
if (urb->iso_frame_desc[i].status < 0) {
print_err_status(dev, i,
urb->iso_frame_desc[i].status);
if (urb->iso_frame_desc[i].status != -EPROTO)
continue;
}
dvb_dmx_swfilter(&dev->dvb->demux,
urb->transfer_buffer +
urb->iso_frame_desc[i].offset,
urb->iso_frame_desc[i].actual_length);
}
}
return 0;
}
static int em28xx_start_streaming(struct em28xx_dvb *dvb)
{
int rc;
struct em28xx *dev = dvb->adapter.priv;
int dvb_max_packet_size, packet_multiplier, dvb_alt;
if (dev->dvb_xfer_bulk) {
if (!dev->dvb_ep_bulk)
return -ENODEV;
dvb_max_packet_size = 512; /* USB 2.0 spec */
packet_multiplier = EM28XX_DVB_BULK_PACKET_MULTIPLIER;
dvb_alt = 0;
} else { /* isoc */
if (!dev->dvb_ep_isoc)
return -ENODEV;
dvb_max_packet_size = dev->dvb_max_pkt_size_isoc;
if (dvb_max_packet_size < 0)
return dvb_max_packet_size;
packet_multiplier = EM28XX_DVB_NUM_ISOC_PACKETS;
dvb_alt = dev->dvb_alt_isoc;
}
usb_set_interface(dev->udev, 0, dvb_alt);
rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
if (rc < 0)
return rc;
dprintk(1, "Using %d buffers each with %d x %d bytes\n",
EM28XX_DVB_NUM_BUFS,
packet_multiplier,
dvb_max_packet_size);
return em28xx_init_usb_xfer(dev, EM28XX_DIGITAL_MODE,
dev->dvb_xfer_bulk,
EM28XX_DVB_NUM_BUFS,
dvb_max_packet_size,
packet_multiplier,
em28xx_dvb_urb_data_copy);
}
static int em28xx_stop_streaming(struct em28xx_dvb *dvb)
{
struct em28xx *dev = dvb->adapter.priv;
em28xx_stop_urbs(dev);
return 0;
}
static int em28xx_start_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct em28xx_dvb *dvb = demux->priv;
int rc, ret;
if (!demux->dmx.frontend)
return -EINVAL;
mutex_lock(&dvb->lock);
dvb->nfeeds++;
rc = dvb->nfeeds;
if (dvb->nfeeds == 1) {
ret = em28xx_start_streaming(dvb);
if (ret < 0)
rc = ret;
}
mutex_unlock(&dvb->lock);
return rc;
}
static int em28xx_stop_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct em28xx_dvb *dvb = demux->priv;
int err = 0;
mutex_lock(&dvb->lock);
dvb->nfeeds--;
if (0 == dvb->nfeeds)
err = em28xx_stop_streaming(dvb);
mutex_unlock(&dvb->lock);
return err;
}
/* ------------------------------------------------------------------ */
static int em28xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
{
struct em28xx *dev = fe->dvb->priv;
if (acquire)
return em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
else
return em28xx_set_mode(dev, EM28XX_SUSPEND);
}
/* ------------------------------------------------------------------ */
static struct lgdt330x_config em2880_lgdt3303_dev = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
};
static struct lgdt3305_config em2870_lgdt3304_dev = {
.i2c_addr = 0x0e,
.demod_chip = LGDT3304,
.spectral_inversion = 1,
.deny_i2c_rptr = 1,
.mpeg_mode = LGDT3305_MPEG_PARALLEL,
.tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
.tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
.vsb_if_khz = 3250,
.qam_if_khz = 4000,
};
static struct s921_config sharp_isdbt = {
.demod_address = 0x30 >> 1
};
static struct zl10353_config em28xx_zl10353_with_xc3028 = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
.parallel_ts = 1,
.if2 = 45600,
};
static struct s5h1409_config em28xx_s5h1409_with_xc3028 = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_PARALLEL_OUTPUT,
.gpio = S5H1409_GPIO_OFF,
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING,
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
};
static struct tda18271_std_map kworld_a340_std_map = {
.atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 0,
.if_lvl = 1, .rfagc_top = 0x37, },
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 1,
.if_lvl = 1, .rfagc_top = 0x37, },
};
static struct tda18271_config kworld_a340_config = {
.std_map = &kworld_a340_std_map,
};
static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
.disable_i2c_gate_ctrl = 1,
.parallel_ts = 1,
.if2 = 45600,
};
static struct drxd_config em28xx_drxd = {
.demod_address = 0x70,
.demod_revision = 0xa2,
.pll_type = DRXD_PLL_NONE,
.clock = 12000,
.insert_rs_byte = 1,
.IF = 42800000,
.disable_i2c_gate_ctrl = 1,
};
static struct drxk_config terratec_h5_drxk = {
.adr = 0x29,
.single_master = 1,
.no_i2c_bridge = 1,
.microcode_name = "dvb-usb-terratec-h5-drxk.fw",
.qam_demod_parameter_count = 2,
.load_firmware_sync = true,
};
static struct drxk_config hauppauge_930c_drxk = {
.adr = 0x29,
.single_master = 1,
.no_i2c_bridge = 1,
.microcode_name = "dvb-usb-hauppauge-hvr930c-drxk.fw",
.chunk_size = 56,
.qam_demod_parameter_count = 2,
.load_firmware_sync = true,
};
static struct drxk_config terratec_htc_stick_drxk = {
.adr = 0x29,
.single_master = 1,
.no_i2c_bridge = 1,
.microcode_name = "dvb-usb-terratec-htc-stick-drxk.fw",
.chunk_size = 54,
.qam_demod_parameter_count = 2,
/* Required for the antenna_gpio to disable LNA. */
.antenna_dvbt = true,
/* The windows driver uses the same. This will disable LNA. */
.antenna_gpio = 0x6,
.load_firmware_sync = true,
};
static struct drxk_config maxmedia_ub425_tc_drxk = {
.adr = 0x29,
.single_master = 1,
.no_i2c_bridge = 1,
.load_firmware_sync = true,
};
static struct drxk_config pctv_520e_drxk = {
.adr = 0x29,
.single_master = 1,
.microcode_name = "dvb-demod-drxk-pctv.fw",
.qam_demod_parameter_count = 2,
.chunk_size = 58,
.antenna_dvbt = true, /* disable LNA */
.antenna_gpio = (1 << 2), /* disable LNA */
.load_firmware_sync = true,
};
static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct em28xx_dvb *dvb = fe->sec_priv;
int status;
if (!dvb)
return -EINVAL;
if (enable) {
down(&dvb->pll_mutex);
status = dvb->gate_ctrl(fe, 1);
} else {
status = dvb->gate_ctrl(fe, 0);
up(&dvb->pll_mutex);
}
return status;
}
static void hauppauge_hvr930c_init(struct em28xx *dev)
{
int i;
struct em28xx_reg_seq hauppauge_hvr930c_init[] = {
{EM2874_R80_GPIO, 0xff, 0xff, 0x65},
{EM2874_R80_GPIO, 0xfb, 0xff, 0x32},
{EM2874_R80_GPIO, 0xff, 0xff, 0xb8},
{ -1, -1, -1, -1},
};
struct em28xx_reg_seq hauppauge_hvr930c_end[] = {
{EM2874_R80_GPIO, 0xef, 0xff, 0x01},
{EM2874_R80_GPIO, 0xaf, 0xff, 0x65},
{EM2874_R80_GPIO, 0xef, 0xff, 0x76},
{EM2874_R80_GPIO, 0xef, 0xff, 0x01},
{EM2874_R80_GPIO, 0xcf, 0xff, 0x0b},
{EM2874_R80_GPIO, 0xef, 0xff, 0x40},
{EM2874_R80_GPIO, 0xcf, 0xff, 0x65},
{EM2874_R80_GPIO, 0xef, 0xff, 0x65},
{EM2874_R80_GPIO, 0xcf, 0xff, 0x0b},
{EM2874_R80_GPIO, 0xef, 0xff, 0x65},
{ -1, -1, -1, -1},
};
struct {
unsigned char r[4];
int len;
} regs[] = {
{{ 0x06, 0x02, 0x00, 0x31 }, 4},
{{ 0x01, 0x02 }, 2},
{{ 0x01, 0x02, 0x00, 0xc6 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0xff, 0xaf }, 4},
{{ 0x01, 0x00, 0x03, 0xa0 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0x73, 0xaf }, 4},
{{ 0x04, 0x00 }, 2},
{{ 0x00, 0x04 }, 2},
{{ 0x00, 0x04, 0x00, 0x0a }, 4},
{{ 0x04, 0x14 }, 2},
{{ 0x04, 0x14, 0x00, 0x00 }, 4},
};
em28xx_gpio_set(dev, hauppauge_hvr930c_init);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
msleep(10);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(10);
dev->i2c_client.addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
em28xx_gpio_set(dev, hauppauge_hvr930c_end);
msleep(100);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(30);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45);
msleep(10);
}
static void terratec_h5_init(struct em28xx *dev)
{
int i;
struct em28xx_reg_seq terratec_h5_init[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{EM2874_R80_GPIO, 0xf6, 0xff, 100},
{EM2874_R80_GPIO, 0xf2, 0xff, 50},
{EM2874_R80_GPIO, 0xf6, 0xff, 100},
{ -1, -1, -1, -1},
};
struct em28xx_reg_seq terratec_h5_end[] = {
{EM2874_R80_GPIO, 0xe6, 0xff, 100},
{EM2874_R80_GPIO, 0xa6, 0xff, 50},
{EM2874_R80_GPIO, 0xe6, 0xff, 100},
{ -1, -1, -1, -1},
};
struct {
unsigned char r[4];
int len;
} regs[] = {
{{ 0x06, 0x02, 0x00, 0x31 }, 4},
{{ 0x01, 0x02 }, 2},
{{ 0x01, 0x02, 0x00, 0xc6 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0xff, 0xaf }, 4},
{{ 0x01, 0x00, 0x03, 0xa0 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0x73, 0xaf }, 4},
{{ 0x04, 0x00 }, 2},
{{ 0x00, 0x04 }, 2},
{{ 0x00, 0x04, 0x00, 0x0a }, 4},
{{ 0x04, 0x14 }, 2},
{{ 0x04, 0x14, 0x00, 0x00 }, 4},
};
em28xx_gpio_set(dev, terratec_h5_init);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
msleep(10);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45);
msleep(10);
dev->i2c_client.addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
em28xx_gpio_set(dev, terratec_h5_end);
};
static void terratec_htc_stick_init(struct em28xx *dev)
{
int i;
/*
* GPIO configuration:
* 0xff: unknown (does not affect DVB-T).
* 0xf6: DRX-K (demodulator).
* 0xe6: unknown (does not affect DVB-T).
* 0xb6: unknown (does not affect DVB-T).
*/
struct em28xx_reg_seq terratec_htc_stick_init[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{EM2874_R80_GPIO, 0xf6, 0xff, 100},
{EM2874_R80_GPIO, 0xe6, 0xff, 50},
{EM2874_R80_GPIO, 0xf6, 0xff, 100},
{ -1, -1, -1, -1},
};
struct em28xx_reg_seq terratec_htc_stick_end[] = {
{EM2874_R80_GPIO, 0xb6, 0xff, 100},
{EM2874_R80_GPIO, 0xf6, 0xff, 50},
{ -1, -1, -1, -1},
};
/*
* Init the analog decoder (not yet supported), but
* it's probably still a good idea.
*/
struct {
unsigned char r[4];
int len;
} regs[] = {
{{ 0x06, 0x02, 0x00, 0x31 }, 4},
{{ 0x01, 0x02 }, 2},
{{ 0x01, 0x02, 0x00, 0xc6 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0xff, 0xaf }, 4},
};
em28xx_gpio_set(dev, terratec_htc_stick_init);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
msleep(10);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(10);
dev->i2c_client.addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
em28xx_gpio_set(dev, terratec_htc_stick_end);
};
static void terratec_htc_usb_xs_init(struct em28xx *dev)
{
int i;
struct em28xx_reg_seq terratec_htc_usb_xs_init[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{EM2874_R80_GPIO, 0xb2, 0xff, 100},
{EM2874_R80_GPIO, 0xb2, 0xff, 50},
{EM2874_R80_GPIO, 0xb6, 0xff, 100},
{ -1, -1, -1, -1},
};
struct em28xx_reg_seq terratec_htc_usb_xs_end[] = {
{EM2874_R80_GPIO, 0xa6, 0xff, 100},
{EM2874_R80_GPIO, 0xa6, 0xff, 50},
{EM2874_R80_GPIO, 0xe6, 0xff, 100},
{ -1, -1, -1, -1},
};
/*
* Init the analog decoder (not yet supported), but
* it's probably still a good idea.
*/
struct {
unsigned char r[4];
int len;
} regs[] = {
{{ 0x06, 0x02, 0x00, 0x31 }, 4},
{{ 0x01, 0x02 }, 2},
{{ 0x01, 0x02, 0x00, 0xc6 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0xff, 0xaf }, 4},
{{ 0x01, 0x00, 0x03, 0xa0 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0x73, 0xaf }, 4},
{{ 0x04, 0x00 }, 2},
{{ 0x00, 0x04 }, 2},
{{ 0x00, 0x04, 0x00, 0x0a }, 4},
{{ 0x04, 0x14 }, 2},
{{ 0x04, 0x14, 0x00, 0x00 }, 4},
};
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
em28xx_gpio_set(dev, terratec_htc_usb_xs_init);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
msleep(10);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(10);
dev->i2c_client.addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
em28xx_gpio_set(dev, terratec_htc_usb_xs_end);
};
static void pctv_520e_init(struct em28xx *dev)
{
/*
* Init AVF4910B analog decoder. Looks like I2C traffic to
* digital demodulator and tuner are routed via AVF4910B.
*/
int i;
struct {
unsigned char r[4];
int len;
} regs[] = {
{{ 0x06, 0x02, 0x00, 0x31 }, 4},
{{ 0x01, 0x02 }, 2},
{{ 0x01, 0x02, 0x00, 0xc6 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0xff, 0xaf }, 4},
{{ 0x01, 0x00, 0x03, 0xa0 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0x73, 0xaf }, 4},
};
dev->i2c_client.addr = 0x82 >> 1; /* 0x41 */
for (i = 0; i < ARRAY_SIZE(regs); i++)
i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
};
static int em28xx_pctv_290e_set_lna(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct em28xx *dev = fe->dvb->priv;
#ifdef CONFIG_GPIOLIB
struct em28xx_dvb *dvb = dev->dvb;
int ret;
unsigned long flags;
if (c->lna == 1)
flags = GPIOF_OUT_INIT_HIGH; /* enable LNA */
else
flags = GPIOF_OUT_INIT_LOW; /* disable LNA */
ret = gpio_request_one(dvb->lna_gpio, flags, NULL);
if (ret)
em28xx_errdev("gpio request failed %d\n", ret);
else
gpio_free(dvb->lna_gpio);
return ret;
#else
dev_warn(&dev->udev->dev, "%s: LNA control is disabled (lna=%u)\n",
KBUILD_MODNAME, c->lna);
return 0;
#endif
}
static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe)
{
/* Values extracted from a USB trace of the Terratec Windows driver */
static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x2c };
static u8 reset[] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0xa0 };
static u8 input_freq_cfg[] = { INPUT_FREQ_1, 0x31, 0xb8 };
static u8 rs_err_cfg[] = { RS_ERR_PER_1, 0x00, 0x4d };
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
static u8 trl_nom_cfg[] = { TRL_NOMINAL_RATE_1, 0x64, 0x00 };
static u8 tps_given_cfg[] = { TPS_GIVEN_1, 0x40, 0x80, 0x50 };
static u8 tuner_go[] = { TUNER_GO, 0x01};
mt352_write(fe, clock_config, sizeof(clock_config));
udelay(200);
mt352_write(fe, reset, sizeof(reset));
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
mt352_write(fe, input_freq_cfg, sizeof(input_freq_cfg));
mt352_write(fe, rs_err_cfg, sizeof(rs_err_cfg));
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
mt352_write(fe, trl_nom_cfg, sizeof(trl_nom_cfg));
mt352_write(fe, tps_given_cfg, sizeof(tps_given_cfg));
mt352_write(fe, tuner_go, sizeof(tuner_go));
return 0;
}
static struct mt352_config terratec_xs_mt352_cfg = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
.if2 = 45600,
.demod_init = em28xx_mt352_terratec_xs_init,
};
static struct tda10023_config em28xx_tda10023_config = {
.demod_address = 0x0c,
.invert = 1,
};
static struct cxd2820r_config em28xx_cxd2820r_config = {
.i2c_address = (0xd8 >> 1),
.ts_mode = CXD2820R_TS_SERIAL,
};
static struct tda18271_config em28xx_cxd2820r_tda18271_config = {
.output_opt = TDA18271_OUTPUT_LT_OFF,
.gate = TDA18271_GATE_DIGITAL,
};
static const struct tda10071_config em28xx_tda10071_config = {
.demod_i2c_addr = 0x55, /* (0xaa >> 1) */
.tuner_i2c_addr = 0x14,
.i2c_wr_max = 64,
.ts_mode = TDA10071_TS_SERIAL,
.spec_inv = 0,
.xtal = 40444000, /* 40.444 MHz */
.pll_multiplier = 20,
};
static const struct a8293_config em28xx_a8293_config = {
.i2c_addr = 0x08, /* (0x10 >> 1) */
};
static struct zl10353_config em28xx_zl10353_no_i2c_gate_dev = {
.demod_address = (0x1e >> 1),
.disable_i2c_gate_ctrl = 1,
.no_tuner = 1,
.parallel_ts = 1,
};
static struct qt1010_config em28xx_qt1010_config = {
.i2c_address = 0x62
};
/* ------------------------------------------------------------------ */
static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev)
{
struct dvb_frontend *fe;
struct xc2028_config cfg;
memset(&cfg, 0, sizeof(cfg));
cfg.i2c_adap = &dev->i2c_adap;
cfg.i2c_addr = addr;
if (!dev->dvb->fe[0]) {
em28xx_errdev("/2: dvb frontend not attached. "
"Can't attach xc3028\n");
return -EINVAL;
}
fe = dvb_attach(xc2028_attach, dev->dvb->fe[0], &cfg);
if (!fe) {
em28xx_errdev("/2: xc3028 attach failed\n");
dvb_frontend_detach(dev->dvb->fe[0]);
dev->dvb->fe[0] = NULL;
return -EINVAL;
}
em28xx_info("%s/2: xc3028 attached\n", dev->name);
return 0;
}
/* ------------------------------------------------------------------ */
static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module,
struct em28xx *dev, struct device *device)
{
int result;
mutex_init(&dvb->lock);
/* register adapter */
result = dvb_register_adapter(&dvb->adapter, dev->name, module, device,
adapter_nr);
if (result < 0) {
printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n",
dev->name, result);
goto fail_adapter;
}
/* Ensure all frontends negotiate bus access */
dvb->fe[0]->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl;
if (dvb->fe[1])
dvb->fe[1]->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl;
dvb->adapter.priv = dev;
/* register frontend */
result = dvb_register_frontend(&dvb->adapter, dvb->fe[0]);
if (result < 0) {
printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n",
dev->name, result);
goto fail_frontend0;
}
/* register 2nd frontend */
if (dvb->fe[1]) {
result = dvb_register_frontend(&dvb->adapter, dvb->fe[1]);
if (result < 0) {
printk(KERN_WARNING "%s: 2nd dvb_register_frontend failed (errno = %d)\n",
dev->name, result);
goto fail_frontend1;
}
}
/* register demux stuff */
dvb->demux.dmx.capabilities =
DMX_TS_FILTERING | DMX_SECTION_FILTERING |
DMX_MEMORY_BASED_FILTERING;
dvb->demux.priv = dvb;
dvb->demux.filternum = 256;
dvb->demux.feednum = 256;
dvb->demux.start_feed = em28xx_start_feed;
dvb->demux.stop_feed = em28xx_stop_feed;
result = dvb_dmx_init(&dvb->demux);
if (result < 0) {
printk(KERN_WARNING "%s: dvb_dmx_init failed (errno = %d)\n",
dev->name, result);
goto fail_dmx;
}
dvb->dmxdev.filternum = 256;
dvb->dmxdev.demux = &dvb->demux.dmx;
dvb->dmxdev.capabilities = 0;
result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
if (result < 0) {
printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n",
dev->name, result);
goto fail_dmxdev;
}
dvb->fe_hw.source = DMX_FRONTEND_0;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
printk(KERN_WARNING "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
dev->name, result);
goto fail_fe_hw;
}
dvb->fe_mem.source = DMX_MEMORY_FE;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
if (result < 0) {
printk(KERN_WARNING "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
dev->name, result);
goto fail_fe_mem;
}
result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
printk(KERN_WARNING "%s: connect_frontend failed (errno = %d)\n",
dev->name, result);
goto fail_fe_conn;
}
/* register network adapter */
dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
return 0;
fail_fe_conn:
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
fail_fe_mem:
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
fail_fe_hw:
dvb_dmxdev_release(&dvb->dmxdev);
fail_dmxdev:
dvb_dmx_release(&dvb->demux);
fail_dmx:
if (dvb->fe[1])
dvb_unregister_frontend(dvb->fe[1]);
dvb_unregister_frontend(dvb->fe[0]);
fail_frontend1:
if (dvb->fe[1])
dvb_frontend_detach(dvb->fe[1]);
fail_frontend0:
dvb_frontend_detach(dvb->fe[0]);
dvb_unregister_adapter(&dvb->adapter);
fail_adapter:
return result;
}
static void em28xx_unregister_dvb(struct em28xx_dvb *dvb)
{
dvb_net_release(&dvb->net);
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
dvb_dmxdev_release(&dvb->dmxdev);
dvb_dmx_release(&dvb->demux);
if (dvb->fe[1])
dvb_unregister_frontend(dvb->fe[1]);
dvb_unregister_frontend(dvb->fe[0]);
if (dvb->fe[1] && !dvb->dont_attach_fe1)
dvb_frontend_detach(dvb->fe[1]);
dvb_frontend_detach(dvb->fe[0]);
dvb_unregister_adapter(&dvb->adapter);
}
static int em28xx_dvb_init(struct em28xx *dev)
{
int result = 0, mfe_shared = 0;
struct em28xx_dvb *dvb;
if (!dev->board.has_dvb) {
/* This device does not support the extension */
printk(KERN_INFO "em28xx_dvb: This device does not support the extension\n");
return 0;
}
dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL);
if (dvb == NULL) {
em28xx_info("em28xx_dvb: memory allocation failed\n");
return -ENOMEM;
}
dev->dvb = dvb;
dvb->fe[0] = dvb->fe[1] = NULL;
mutex_lock(&dev->lock);
em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
/* init frontend */
switch (dev->model) {
case EM2874_BOARD_LEADERSHIP_ISDBT:
dvb->fe[0] = dvb_attach(s921_attach,
&sharp_isdbt, &dev->i2c_adap);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
}
break;
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
dvb->fe[0] = dvb_attach(lgdt330x_attach,
&em2880_lgdt3303_dev,
&dev->i2c_adap);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
break;
case EM2880_BOARD_KWORLD_DVB_310U:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_with_xc3028,
&dev->i2c_adap);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2882_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
&dev->i2c_adap);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
case EM2881_BOARD_PINNACLE_HYBRID_PRO:
case EM2882_BOARD_DIKOM_DK300:
case EM2882_BOARD_KWORLD_VS_DVBT:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
&dev->i2c_adap);
if (dvb->fe[0] == NULL) {
/* This board could have either a zl10353 or a mt352.
If the chip id isn't for zl10353, try mt352 */
dvb->fe[0] = dvb_attach(mt352_attach,
&terratec_xs_mt352_cfg,
&dev->i2c_adap);
}
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
break;
case EM2870_BOARD_KWORLD_355U:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_no_i2c_gate_dev,
&dev->i2c_adap);
if (dvb->fe[0] != NULL)
dvb_attach(qt1010_attach, dvb->fe[0],
&dev->i2c_adap, &em28xx_qt1010_config);
break;
case EM2883_BOARD_KWORLD_HYBRID_330U:
case EM2882_BOARD_EVGA_INDTUBE:
dvb->fe[0] = dvb_attach(s5h1409_attach,
&em28xx_s5h1409_with_xc3028,
&dev->i2c_adap);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
break;
case EM2882_BOARD_KWORLD_ATSC_315U:
dvb->fe[0] = dvb_attach(lgdt330x_attach,
&em2880_lgdt3303_dev,
&dev->i2c_adap);
if (dvb->fe[0] != NULL) {
if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
&dev->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) {
result = -EINVAL;
goto out_free;
}
}
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
dvb->fe[0] = dvb_attach(drxd_attach, &em28xx_drxd, NULL,
&dev->i2c_adap, &dev->udev->dev);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
}
break;
case EM2870_BOARD_REDDO_DVB_C_USB_BOX:
/* Philips CU1216L NIM (Philips TDA10023 + Infineon TUA6034) */
dvb->fe[0] = dvb_attach(tda10023_attach,
&em28xx_tda10023_config,
&dev->i2c_adap, 0x48);
if (dvb->fe[0]) {
if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
&dev->i2c_adap, 0x60, TUNER_PHILIPS_CU1216L)) {
result = -EINVAL;
goto out_free;
}
}
break;
case EM2870_BOARD_KWORLD_A340:
dvb->fe[0] = dvb_attach(lgdt3305_attach,
&em2870_lgdt3304_dev,
&dev->i2c_adap);
if (dvb->fe[0] != NULL)
dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
&dev->i2c_adap, &kworld_a340_config);
break;
case EM28174_BOARD_PCTV_290E:
/* set default GPIO0 for LNA, used if GPIOLIB is undefined */
dvb->lna_gpio = CXD2820R_GPIO_E | CXD2820R_GPIO_O |
CXD2820R_GPIO_L;
dvb->fe[0] = dvb_attach(cxd2820r_attach,
&em28xx_cxd2820r_config,
&dev->i2c_adap,
&dvb->lna_gpio);
if (dvb->fe[0]) {
/* FE 0 attach tuner */
if (!dvb_attach(tda18271_attach,
dvb->fe[0],
0x60,
&dev->i2c_adap,
&em28xx_cxd2820r_tda18271_config)) {
dvb_frontend_detach(dvb->fe[0]);
result = -EINVAL;
goto out_free;
}
#ifdef CONFIG_GPIOLIB
/* enable LNA for DVB-T, DVB-T2 and DVB-C */
result = gpio_request_one(dvb->lna_gpio,
GPIOF_OUT_INIT_LOW, NULL);
if (result)
em28xx_errdev("gpio request failed %d\n",
result);
else
gpio_free(dvb->lna_gpio);
result = 0; /* continue even set LNA fails */
#endif
dvb->fe[0]->ops.set_lna = em28xx_pctv_290e_set_lna;
}
break;
case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
{
struct xc5000_config cfg;
hauppauge_hvr930c_init(dev);
dvb->fe[0] = dvb_attach(drxk_attach,
&hauppauge_930c_drxk, &dev->i2c_adap);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
}
/* FIXME: do we need a pll semaphore? */
dvb->fe[0]->sec_priv = dvb;
sema_init(&dvb->pll_mutex, 1);
dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl;
dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
/* Attach xc5000 */
memset(&cfg, 0, sizeof(cfg));
cfg.i2c_address = 0x61;
cfg.if_khz = 4000;
if (dvb->fe[0]->ops.i2c_gate_ctrl)
dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
if (!dvb_attach(xc5000_attach, dvb->fe[0], &dev->i2c_adap,
&cfg)) {
result = -EINVAL;
goto out_free;
}
if (dvb->fe[0]->ops.i2c_gate_ctrl)
dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0);
break;
}
case EM2884_BOARD_TERRATEC_H5:
terratec_h5_init(dev);
dvb->fe[0] = dvb_attach(drxk_attach, &terratec_h5_drxk, &dev->i2c_adap);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
}
/* FIXME: do we need a pll semaphore? */
dvb->fe[0]->sec_priv = dvb;
sema_init(&dvb->pll_mutex, 1);
dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl;
dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
/* Attach tda18271 to DVB-C frontend */
if (dvb->fe[0]->ops.i2c_gate_ctrl)
dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], &dev->i2c_adap, 0x60)) {
result = -EINVAL;
goto out_free;
}
if (dvb->fe[0]->ops.i2c_gate_ctrl)
dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0);
break;
case EM28174_BOARD_PCTV_460E:
/* attach demod */
dvb->fe[0] = dvb_attach(tda10071_attach,
&em28xx_tda10071_config, &dev->i2c_adap);
/* attach SEC */
if (dvb->fe[0])
dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap,
&em28xx_a8293_config);
break;
case EM2874_BOARD_MAXMEDIA_UB425_TC:
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &maxmedia_ub425_tc_drxk,
&dev->i2c_adap);
if (dvb->fe[0]) {
/* disable I2C-gate */
dvb->fe[0]->ops.i2c_gate_ctrl = NULL;
/* attach tuner */
if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0],
&dev->i2c_adap, 0x60)) {
dvb_frontend_detach(dvb->fe[0]);
result = -EINVAL;
goto out_free;
}
}
/* TODO: we need drx-3913k firmware in order to support DVB-T */
em28xx_info("MaxMedia UB425-TC: only DVB-C supported by that " \
"driver version\n");
break;
case EM2884_BOARD_PCTV_510E:
case EM2884_BOARD_PCTV_520E:
pctv_520e_init(dev);
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &pctv_520e_drxk,
&dev->i2c_adap);
if (dvb->fe[0]) {
/* attach tuner */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
&dev->i2c_adap,
&em28xx_cxd2820r_tda18271_config)) {
dvb_frontend_detach(dvb->fe[0]);
result = -EINVAL;
goto out_free;
}
}
break;
case EM2884_BOARD_CINERGY_HTC_STICK:
terratec_htc_stick_init(dev);
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk,
&dev->i2c_adap);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
}
/* Attach the demodulator. */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
&dev->i2c_adap,
&em28xx_cxd2820r_tda18271_config)) {
result = -EINVAL;
goto out_free;
}
break;
case EM2884_BOARD_TERRATEC_HTC_USB_XS:
terratec_htc_usb_xs_init(dev);
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk,
&dev->i2c_adap);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
}
/* Attach the demodulator. */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
&dev->i2c_adap,
&em28xx_cxd2820r_tda18271_config)) {
result = -EINVAL;
goto out_free;
}
break;
default:
em28xx_errdev("/2: The frontend of your DVB/ATSC card"
" isn't supported yet\n");
break;
}
if (NULL == dvb->fe[0]) {
em28xx_errdev("/2: frontend initialization failed\n");
result = -EINVAL;
goto out_free;
}
/* define general-purpose callback pointer */
dvb->fe[0]->callback = em28xx_tuner_callback;
if (dvb->fe[1])
dvb->fe[1]->callback = em28xx_tuner_callback;
/* register everything */
result = em28xx_register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev);
if (result < 0)
goto out_free;
/* MFE lock */
dvb->adapter.mfe_shared = mfe_shared;
em28xx_info("Successfully loaded em28xx-dvb\n");
ret:
em28xx_set_mode(dev, EM28XX_SUSPEND);
mutex_unlock(&dev->lock);
return result;
out_free:
kfree(dvb);
dev->dvb = NULL;
goto ret;
}
static inline void prevent_sleep(struct dvb_frontend_ops *ops)
{
ops->set_voltage = NULL;
ops->sleep = NULL;
ops->tuner_ops.sleep = NULL;
}
static int em28xx_dvb_fini(struct em28xx *dev)
{
if (!dev->board.has_dvb) {
/* This device does not support the extension */
return 0;
}
if (dev->dvb) {
struct em28xx_dvb *dvb = dev->dvb;
if (dev->disconnected) {
/* We cannot tell the device to sleep
* once it has been unplugged. */
if (dvb->fe[0])
prevent_sleep(&dvb->fe[0]->ops);
if (dvb->fe[1])
prevent_sleep(&dvb->fe[1]->ops);
}
em28xx_unregister_dvb(dvb);
kfree(dvb);
dev->dvb = NULL;
}
return 0;
}
static struct em28xx_ops dvb_ops = {
.id = EM28XX_DVB,
.name = "Em28xx dvb Extension",
.init = em28xx_dvb_init,
.fini = em28xx_dvb_fini,
};
static int __init em28xx_dvb_register(void)
{
return em28xx_register_extension(&dvb_ops);
}
static void __exit em28xx_dvb_unregister(void)
{
em28xx_unregister_extension(&dvb_ops);
}
module_init(em28xx_dvb_register);
module_exit(em28xx_dvb_unregister);
Reference in New Issue View Git Blame Copy Permalink