mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-21 01:54:51 +08:00
bc227385eb
Document the struct xilinx_dpdma_chan desc field to fix a kerneldoc undocumented member warning (which can be reproduced by compiling with W=1). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200722161747.30048-1-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
1536 lines
44 KiB
C
1536 lines
44 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Xilinx ZynqMP DPDMA Engine driver
|
|
*
|
|
* Copyright (C) 2015 - 2020 Xilinx, Inc.
|
|
*
|
|
* Author: Hyun Woo Kwon <hyun.kwon@xilinx.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/wait.h>
|
|
|
|
#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
|
|
|
|
#include "../dmaengine.h"
|
|
#include "../virt-dma.h"
|
|
|
|
/* DPDMA registers */
|
|
#define XILINX_DPDMA_ERR_CTRL 0x000
|
|
#define XILINX_DPDMA_ISR 0x004
|
|
#define XILINX_DPDMA_IMR 0x008
|
|
#define XILINX_DPDMA_IEN 0x00c
|
|
#define XILINX_DPDMA_IDS 0x010
|
|
#define XILINX_DPDMA_INTR_DESC_DONE(n) BIT((n) + 0)
|
|
#define XILINX_DPDMA_INTR_DESC_DONE_MASK GENMASK(5, 0)
|
|
#define XILINX_DPDMA_INTR_NO_OSTAND(n) BIT((n) + 6)
|
|
#define XILINX_DPDMA_INTR_NO_OSTAND_MASK GENMASK(11, 6)
|
|
#define XILINX_DPDMA_INTR_AXI_ERR(n) BIT((n) + 12)
|
|
#define XILINX_DPDMA_INTR_AXI_ERR_MASK GENMASK(17, 12)
|
|
#define XILINX_DPDMA_INTR_DESC_ERR(n) BIT((n) + 16)
|
|
#define XILINX_DPDMA_INTR_DESC_ERR_MASK GENMASK(23, 18)
|
|
#define XILINX_DPDMA_INTR_WR_CMD_FIFO_FULL BIT(24)
|
|
#define XILINX_DPDMA_INTR_WR_DATA_FIFO_FULL BIT(25)
|
|
#define XILINX_DPDMA_INTR_AXI_4K_CROSS BIT(26)
|
|
#define XILINX_DPDMA_INTR_VSYNC BIT(27)
|
|
#define XILINX_DPDMA_INTR_CHAN_ERR_MASK 0x00041000
|
|
#define XILINX_DPDMA_INTR_CHAN_ERR 0x00fff000
|
|
#define XILINX_DPDMA_INTR_GLOBAL_ERR 0x07000000
|
|
#define XILINX_DPDMA_INTR_ERR_ALL 0x07fff000
|
|
#define XILINX_DPDMA_INTR_CHAN_MASK 0x00041041
|
|
#define XILINX_DPDMA_INTR_GLOBAL_MASK 0x0f000000
|
|
#define XILINX_DPDMA_INTR_ALL 0x0fffffff
|
|
#define XILINX_DPDMA_EISR 0x014
|
|
#define XILINX_DPDMA_EIMR 0x018
|
|
#define XILINX_DPDMA_EIEN 0x01c
|
|
#define XILINX_DPDMA_EIDS 0x020
|
|
#define XILINX_DPDMA_EINTR_INV_APB BIT(0)
|
|
#define XILINX_DPDMA_EINTR_RD_AXI_ERR(n) BIT((n) + 1)
|
|
#define XILINX_DPDMA_EINTR_RD_AXI_ERR_MASK GENMASK(6, 1)
|
|
#define XILINX_DPDMA_EINTR_PRE_ERR(n) BIT((n) + 7)
|
|
#define XILINX_DPDMA_EINTR_PRE_ERR_MASK GENMASK(12, 7)
|
|
#define XILINX_DPDMA_EINTR_CRC_ERR(n) BIT((n) + 13)
|
|
#define XILINX_DPDMA_EINTR_CRC_ERR_MASK GENMASK(18, 13)
|
|
#define XILINX_DPDMA_EINTR_WR_AXI_ERR(n) BIT((n) + 19)
|
|
#define XILINX_DPDMA_EINTR_WR_AXI_ERR_MASK GENMASK(24, 19)
|
|
#define XILINX_DPDMA_EINTR_DESC_DONE_ERR(n) BIT((n) + 25)
|
|
#define XILINX_DPDMA_EINTR_DESC_DONE_ERR_MASK GENMASK(30, 25)
|
|
#define XILINX_DPDMA_EINTR_RD_CMD_FIFO_FULL BIT(32)
|
|
#define XILINX_DPDMA_EINTR_CHAN_ERR_MASK 0x02082082
|
|
#define XILINX_DPDMA_EINTR_CHAN_ERR 0x7ffffffe
|
|
#define XILINX_DPDMA_EINTR_GLOBAL_ERR 0x80000001
|
|
#define XILINX_DPDMA_EINTR_ALL 0xffffffff
|
|
#define XILINX_DPDMA_CNTL 0x100
|
|
#define XILINX_DPDMA_GBL 0x104
|
|
#define XILINX_DPDMA_GBL_TRIG_MASK(n) ((n) << 0)
|
|
#define XILINX_DPDMA_GBL_RETRIG_MASK(n) ((n) << 6)
|
|
#define XILINX_DPDMA_ALC0_CNTL 0x108
|
|
#define XILINX_DPDMA_ALC0_STATUS 0x10c
|
|
#define XILINX_DPDMA_ALC0_MAX 0x110
|
|
#define XILINX_DPDMA_ALC0_MIN 0x114
|
|
#define XILINX_DPDMA_ALC0_ACC 0x118
|
|
#define XILINX_DPDMA_ALC0_ACC_TRAN 0x11c
|
|
#define XILINX_DPDMA_ALC1_CNTL 0x120
|
|
#define XILINX_DPDMA_ALC1_STATUS 0x124
|
|
#define XILINX_DPDMA_ALC1_MAX 0x128
|
|
#define XILINX_DPDMA_ALC1_MIN 0x12c
|
|
#define XILINX_DPDMA_ALC1_ACC 0x130
|
|
#define XILINX_DPDMA_ALC1_ACC_TRAN 0x134
|
|
|
|
/* Channel register */
|
|
#define XILINX_DPDMA_CH_BASE 0x200
|
|
#define XILINX_DPDMA_CH_OFFSET 0x100
|
|
#define XILINX_DPDMA_CH_DESC_START_ADDRE 0x000
|
|
#define XILINX_DPDMA_CH_DESC_START_ADDRE_MASK GENMASK(15, 0)
|
|
#define XILINX_DPDMA_CH_DESC_START_ADDR 0x004
|
|
#define XILINX_DPDMA_CH_DESC_NEXT_ADDRE 0x008
|
|
#define XILINX_DPDMA_CH_DESC_NEXT_ADDR 0x00c
|
|
#define XILINX_DPDMA_CH_PYLD_CUR_ADDRE 0x010
|
|
#define XILINX_DPDMA_CH_PYLD_CUR_ADDR 0x014
|
|
#define XILINX_DPDMA_CH_CNTL 0x018
|
|
#define XILINX_DPDMA_CH_CNTL_ENABLE BIT(0)
|
|
#define XILINX_DPDMA_CH_CNTL_PAUSE BIT(1)
|
|
#define XILINX_DPDMA_CH_CNTL_QOS_DSCR_WR_MASK GENMASK(5, 2)
|
|
#define XILINX_DPDMA_CH_CNTL_QOS_DSCR_RD_MASK GENMASK(9, 6)
|
|
#define XILINX_DPDMA_CH_CNTL_QOS_DATA_RD_MASK GENMASK(13, 10)
|
|
#define XILINX_DPDMA_CH_CNTL_QOS_VID_CLASS 11
|
|
#define XILINX_DPDMA_CH_STATUS 0x01c
|
|
#define XILINX_DPDMA_CH_STATUS_OTRAN_CNT_MASK GENMASK(24, 21)
|
|
#define XILINX_DPDMA_CH_VDO 0x020
|
|
#define XILINX_DPDMA_CH_PYLD_SZ 0x024
|
|
#define XILINX_DPDMA_CH_DESC_ID 0x028
|
|
|
|
/* DPDMA descriptor fields */
|
|
#define XILINX_DPDMA_DESC_CONTROL_PREEMBLE 0xa5
|
|
#define XILINX_DPDMA_DESC_CONTROL_COMPLETE_INTR BIT(8)
|
|
#define XILINX_DPDMA_DESC_CONTROL_DESC_UPDATE BIT(9)
|
|
#define XILINX_DPDMA_DESC_CONTROL_IGNORE_DONE BIT(10)
|
|
#define XILINX_DPDMA_DESC_CONTROL_FRAG_MODE BIT(18)
|
|
#define XILINX_DPDMA_DESC_CONTROL_LAST BIT(19)
|
|
#define XILINX_DPDMA_DESC_CONTROL_ENABLE_CRC BIT(20)
|
|
#define XILINX_DPDMA_DESC_CONTROL_LAST_OF_FRAME BIT(21)
|
|
#define XILINX_DPDMA_DESC_ID_MASK GENMASK(15, 0)
|
|
#define XILINX_DPDMA_DESC_HSIZE_STRIDE_HSIZE_MASK GENMASK(17, 0)
|
|
#define XILINX_DPDMA_DESC_HSIZE_STRIDE_STRIDE_MASK GENMASK(31, 18)
|
|
#define XILINX_DPDMA_DESC_ADDR_EXT_NEXT_ADDR_MASK GENMASK(15, 0)
|
|
#define XILINX_DPDMA_DESC_ADDR_EXT_SRC_ADDR_MASK GENMASK(31, 16)
|
|
|
|
#define XILINX_DPDMA_ALIGN_BYTES 256
|
|
#define XILINX_DPDMA_LINESIZE_ALIGN_BITS 128
|
|
|
|
#define XILINX_DPDMA_NUM_CHAN 6
|
|
|
|
struct xilinx_dpdma_chan;
|
|
|
|
/**
|
|
* struct xilinx_dpdma_hw_desc - DPDMA hardware descriptor
|
|
* @control: control configuration field
|
|
* @desc_id: descriptor ID
|
|
* @xfer_size: transfer size
|
|
* @hsize_stride: horizontal size and stride
|
|
* @timestamp_lsb: LSB of time stamp
|
|
* @timestamp_msb: MSB of time stamp
|
|
* @addr_ext: upper 16 bit of 48 bit address (next_desc and src_addr)
|
|
* @next_desc: next descriptor 32 bit address
|
|
* @src_addr: payload source address (1st page, 32 LSB)
|
|
* @addr_ext_23: payload source address (3nd and 3rd pages, 16 LSBs)
|
|
* @addr_ext_45: payload source address (4th and 5th pages, 16 LSBs)
|
|
* @src_addr2: payload source address (2nd page, 32 LSB)
|
|
* @src_addr3: payload source address (3rd page, 32 LSB)
|
|
* @src_addr4: payload source address (4th page, 32 LSB)
|
|
* @src_addr5: payload source address (5th page, 32 LSB)
|
|
* @crc: descriptor CRC
|
|
*/
|
|
struct xilinx_dpdma_hw_desc {
|
|
u32 control;
|
|
u32 desc_id;
|
|
u32 xfer_size;
|
|
u32 hsize_stride;
|
|
u32 timestamp_lsb;
|
|
u32 timestamp_msb;
|
|
u32 addr_ext;
|
|
u32 next_desc;
|
|
u32 src_addr;
|
|
u32 addr_ext_23;
|
|
u32 addr_ext_45;
|
|
u32 src_addr2;
|
|
u32 src_addr3;
|
|
u32 src_addr4;
|
|
u32 src_addr5;
|
|
u32 crc;
|
|
} __aligned(XILINX_DPDMA_ALIGN_BYTES);
|
|
|
|
/**
|
|
* struct xilinx_dpdma_sw_desc - DPDMA software descriptor
|
|
* @hw: DPDMA hardware descriptor
|
|
* @node: list node for software descriptors
|
|
* @dma_addr: DMA address of the software descriptor
|
|
*/
|
|
struct xilinx_dpdma_sw_desc {
|
|
struct xilinx_dpdma_hw_desc hw;
|
|
struct list_head node;
|
|
dma_addr_t dma_addr;
|
|
};
|
|
|
|
/**
|
|
* struct xilinx_dpdma_tx_desc - DPDMA transaction descriptor
|
|
* @vdesc: virtual DMA descriptor
|
|
* @chan: DMA channel
|
|
* @descriptors: list of software descriptors
|
|
* @error: an error has been detected with this descriptor
|
|
*/
|
|
struct xilinx_dpdma_tx_desc {
|
|
struct virt_dma_desc vdesc;
|
|
struct xilinx_dpdma_chan *chan;
|
|
struct list_head descriptors;
|
|
bool error;
|
|
};
|
|
|
|
#define to_dpdma_tx_desc(_desc) \
|
|
container_of(_desc, struct xilinx_dpdma_tx_desc, vdesc)
|
|
|
|
/**
|
|
* struct xilinx_dpdma_chan - DPDMA channel
|
|
* @vchan: virtual DMA channel
|
|
* @reg: register base address
|
|
* @id: channel ID
|
|
* @wait_to_stop: queue to wait for outstanding transacitons before stopping
|
|
* @running: true if the channel is running
|
|
* @first_frame: flag for the first frame of stream
|
|
* @video_group: flag if multi-channel operation is needed for video channels
|
|
* @lock: lock to access struct xilinx_dpdma_chan
|
|
* @desc_pool: descriptor allocation pool
|
|
* @err_task: error IRQ bottom half handler
|
|
* @desc: References to descriptors being processed
|
|
* @desc.pending: Descriptor schedule to the hardware, pending execution
|
|
* @desc.active: Descriptor being executed by the hardware
|
|
* @xdev: DPDMA device
|
|
*/
|
|
struct xilinx_dpdma_chan {
|
|
struct virt_dma_chan vchan;
|
|
void __iomem *reg;
|
|
unsigned int id;
|
|
|
|
wait_queue_head_t wait_to_stop;
|
|
bool running;
|
|
bool first_frame;
|
|
bool video_group;
|
|
|
|
spinlock_t lock; /* lock to access struct xilinx_dpdma_chan */
|
|
struct dma_pool *desc_pool;
|
|
struct tasklet_struct err_task;
|
|
|
|
struct {
|
|
struct xilinx_dpdma_tx_desc *pending;
|
|
struct xilinx_dpdma_tx_desc *active;
|
|
} desc;
|
|
|
|
struct xilinx_dpdma_device *xdev;
|
|
};
|
|
|
|
#define to_xilinx_chan(_chan) \
|
|
container_of(_chan, struct xilinx_dpdma_chan, vchan.chan)
|
|
|
|
/**
|
|
* struct xilinx_dpdma_device - DPDMA device
|
|
* @common: generic dma device structure
|
|
* @reg: register base address
|
|
* @dev: generic device structure
|
|
* @irq: the interrupt number
|
|
* @axi_clk: axi clock
|
|
* @chan: DPDMA channels
|
|
* @ext_addr: flag for 64 bit system (48 bit addressing)
|
|
*/
|
|
struct xilinx_dpdma_device {
|
|
struct dma_device common;
|
|
void __iomem *reg;
|
|
struct device *dev;
|
|
int irq;
|
|
|
|
struct clk *axi_clk;
|
|
struct xilinx_dpdma_chan *chan[XILINX_DPDMA_NUM_CHAN];
|
|
|
|
bool ext_addr;
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* I/O Accessors
|
|
*/
|
|
|
|
static inline u32 dpdma_read(void __iomem *base, u32 offset)
|
|
{
|
|
return ioread32(base + offset);
|
|
}
|
|
|
|
static inline void dpdma_write(void __iomem *base, u32 offset, u32 val)
|
|
{
|
|
iowrite32(val, base + offset);
|
|
}
|
|
|
|
static inline void dpdma_clr(void __iomem *base, u32 offset, u32 clr)
|
|
{
|
|
dpdma_write(base, offset, dpdma_read(base, offset) & ~clr);
|
|
}
|
|
|
|
static inline void dpdma_set(void __iomem *base, u32 offset, u32 set)
|
|
{
|
|
dpdma_write(base, offset, dpdma_read(base, offset) | set);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Descriptor Operations
|
|
*/
|
|
|
|
/**
|
|
* xilinx_dpdma_sw_desc_set_dma_addrs - Set DMA addresses in the descriptor
|
|
* @xdev: DPDMA device
|
|
* @sw_desc: The software descriptor in which to set DMA addresses
|
|
* @prev: The previous descriptor
|
|
* @dma_addr: array of dma addresses
|
|
* @num_src_addr: number of addresses in @dma_addr
|
|
*
|
|
* Set all the DMA addresses in the hardware descriptor corresponding to @dev
|
|
* from @dma_addr. If a previous descriptor is specified in @prev, its next
|
|
* descriptor DMA address is set to the DMA address of @sw_desc. @prev may be
|
|
* identical to @sw_desc for cyclic transfers.
|
|
*/
|
|
static void xilinx_dpdma_sw_desc_set_dma_addrs(struct xilinx_dpdma_device *xdev,
|
|
struct xilinx_dpdma_sw_desc *sw_desc,
|
|
struct xilinx_dpdma_sw_desc *prev,
|
|
dma_addr_t dma_addr[],
|
|
unsigned int num_src_addr)
|
|
{
|
|
struct xilinx_dpdma_hw_desc *hw_desc = &sw_desc->hw;
|
|
unsigned int i;
|
|
|
|
hw_desc->src_addr = lower_32_bits(dma_addr[0]);
|
|
if (xdev->ext_addr)
|
|
hw_desc->addr_ext |=
|
|
FIELD_PREP(XILINX_DPDMA_DESC_ADDR_EXT_SRC_ADDR_MASK,
|
|
upper_32_bits(dma_addr[0]));
|
|
|
|
for (i = 1; i < num_src_addr; i++) {
|
|
u32 *addr = &hw_desc->src_addr2;
|
|
|
|
addr[i-1] = lower_32_bits(dma_addr[i]);
|
|
|
|
if (xdev->ext_addr) {
|
|
u32 *addr_ext = &hw_desc->addr_ext_23;
|
|
u32 addr_msb;
|
|
|
|
addr_msb = upper_32_bits(dma_addr[i]) & GENMASK(15, 0);
|
|
addr_msb <<= 16 * ((i - 1) % 2);
|
|
addr_ext[(i - 1) / 2] |= addr_msb;
|
|
}
|
|
}
|
|
|
|
if (!prev)
|
|
return;
|
|
|
|
prev->hw.next_desc = lower_32_bits(sw_desc->dma_addr);
|
|
if (xdev->ext_addr)
|
|
prev->hw.addr_ext |=
|
|
FIELD_PREP(XILINX_DPDMA_DESC_ADDR_EXT_NEXT_ADDR_MASK,
|
|
upper_32_bits(sw_desc->dma_addr));
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_alloc_sw_desc - Allocate a software descriptor
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Allocate a software descriptor from the channel's descriptor pool.
|
|
*
|
|
* Return: a software descriptor or NULL.
|
|
*/
|
|
static struct xilinx_dpdma_sw_desc *
|
|
xilinx_dpdma_chan_alloc_sw_desc(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
struct xilinx_dpdma_sw_desc *sw_desc;
|
|
dma_addr_t dma_addr;
|
|
|
|
sw_desc = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &dma_addr);
|
|
if (!sw_desc)
|
|
return NULL;
|
|
|
|
sw_desc->dma_addr = dma_addr;
|
|
|
|
return sw_desc;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_free_sw_desc - Free a software descriptor
|
|
* @chan: DPDMA channel
|
|
* @sw_desc: software descriptor to free
|
|
*
|
|
* Free a software descriptor from the channel's descriptor pool.
|
|
*/
|
|
static void
|
|
xilinx_dpdma_chan_free_sw_desc(struct xilinx_dpdma_chan *chan,
|
|
struct xilinx_dpdma_sw_desc *sw_desc)
|
|
{
|
|
dma_pool_free(chan->desc_pool, sw_desc, sw_desc->dma_addr);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_dump_tx_desc - Dump a tx descriptor
|
|
* @chan: DPDMA channel
|
|
* @tx_desc: tx descriptor to dump
|
|
*
|
|
* Dump contents of a tx descriptor
|
|
*/
|
|
static void xilinx_dpdma_chan_dump_tx_desc(struct xilinx_dpdma_chan *chan,
|
|
struct xilinx_dpdma_tx_desc *tx_desc)
|
|
{
|
|
struct xilinx_dpdma_sw_desc *sw_desc;
|
|
struct device *dev = chan->xdev->dev;
|
|
unsigned int i = 0;
|
|
|
|
dev_dbg(dev, "------- TX descriptor dump start -------\n");
|
|
dev_dbg(dev, "------- channel ID = %d -------\n", chan->id);
|
|
|
|
list_for_each_entry(sw_desc, &tx_desc->descriptors, node) {
|
|
struct xilinx_dpdma_hw_desc *hw_desc = &sw_desc->hw;
|
|
|
|
dev_dbg(dev, "------- HW descriptor %d -------\n", i++);
|
|
dev_dbg(dev, "descriptor DMA addr: %pad\n", &sw_desc->dma_addr);
|
|
dev_dbg(dev, "control: 0x%08x\n", hw_desc->control);
|
|
dev_dbg(dev, "desc_id: 0x%08x\n", hw_desc->desc_id);
|
|
dev_dbg(dev, "xfer_size: 0x%08x\n", hw_desc->xfer_size);
|
|
dev_dbg(dev, "hsize_stride: 0x%08x\n", hw_desc->hsize_stride);
|
|
dev_dbg(dev, "timestamp_lsb: 0x%08x\n", hw_desc->timestamp_lsb);
|
|
dev_dbg(dev, "timestamp_msb: 0x%08x\n", hw_desc->timestamp_msb);
|
|
dev_dbg(dev, "addr_ext: 0x%08x\n", hw_desc->addr_ext);
|
|
dev_dbg(dev, "next_desc: 0x%08x\n", hw_desc->next_desc);
|
|
dev_dbg(dev, "src_addr: 0x%08x\n", hw_desc->src_addr);
|
|
dev_dbg(dev, "addr_ext_23: 0x%08x\n", hw_desc->addr_ext_23);
|
|
dev_dbg(dev, "addr_ext_45: 0x%08x\n", hw_desc->addr_ext_45);
|
|
dev_dbg(dev, "src_addr2: 0x%08x\n", hw_desc->src_addr2);
|
|
dev_dbg(dev, "src_addr3: 0x%08x\n", hw_desc->src_addr3);
|
|
dev_dbg(dev, "src_addr4: 0x%08x\n", hw_desc->src_addr4);
|
|
dev_dbg(dev, "src_addr5: 0x%08x\n", hw_desc->src_addr5);
|
|
dev_dbg(dev, "crc: 0x%08x\n", hw_desc->crc);
|
|
}
|
|
|
|
dev_dbg(dev, "------- TX descriptor dump end -------\n");
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_alloc_tx_desc - Allocate a transaction descriptor
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Allocate a tx descriptor.
|
|
*
|
|
* Return: a tx descriptor or NULL.
|
|
*/
|
|
static struct xilinx_dpdma_tx_desc *
|
|
xilinx_dpdma_chan_alloc_tx_desc(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
struct xilinx_dpdma_tx_desc *tx_desc;
|
|
|
|
tx_desc = kzalloc(sizeof(*tx_desc), GFP_NOWAIT);
|
|
if (!tx_desc)
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD(&tx_desc->descriptors);
|
|
tx_desc->chan = chan;
|
|
tx_desc->error = false;
|
|
|
|
return tx_desc;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_free_tx_desc - Free a virtual DMA descriptor
|
|
* @vdesc: virtual DMA descriptor
|
|
*
|
|
* Free the virtual DMA descriptor @vdesc including its software descriptors.
|
|
*/
|
|
static void xilinx_dpdma_chan_free_tx_desc(struct virt_dma_desc *vdesc)
|
|
{
|
|
struct xilinx_dpdma_sw_desc *sw_desc, *next;
|
|
struct xilinx_dpdma_tx_desc *desc;
|
|
|
|
if (!vdesc)
|
|
return;
|
|
|
|
desc = to_dpdma_tx_desc(vdesc);
|
|
|
|
list_for_each_entry_safe(sw_desc, next, &desc->descriptors, node) {
|
|
list_del(&sw_desc->node);
|
|
xilinx_dpdma_chan_free_sw_desc(desc->chan, sw_desc);
|
|
}
|
|
|
|
kfree(desc);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_prep_interleaved_dma - Prepare an interleaved dma
|
|
* descriptor
|
|
* @chan: DPDMA channel
|
|
* @xt: dma interleaved template
|
|
*
|
|
* Prepare a tx descriptor including internal software/hardware descriptors
|
|
* based on @xt.
|
|
*
|
|
* Return: A DPDMA TX descriptor on success, or NULL.
|
|
*/
|
|
static struct xilinx_dpdma_tx_desc *
|
|
xilinx_dpdma_chan_prep_interleaved_dma(struct xilinx_dpdma_chan *chan,
|
|
struct dma_interleaved_template *xt)
|
|
{
|
|
struct xilinx_dpdma_tx_desc *tx_desc;
|
|
struct xilinx_dpdma_sw_desc *sw_desc;
|
|
struct xilinx_dpdma_hw_desc *hw_desc;
|
|
size_t hsize = xt->sgl[0].size;
|
|
size_t stride = hsize + xt->sgl[0].icg;
|
|
|
|
if (!IS_ALIGNED(xt->src_start, XILINX_DPDMA_ALIGN_BYTES)) {
|
|
dev_err(chan->xdev->dev, "buffer should be aligned at %d B\n",
|
|
XILINX_DPDMA_ALIGN_BYTES);
|
|
return NULL;
|
|
}
|
|
|
|
tx_desc = xilinx_dpdma_chan_alloc_tx_desc(chan);
|
|
if (!tx_desc)
|
|
return NULL;
|
|
|
|
sw_desc = xilinx_dpdma_chan_alloc_sw_desc(chan);
|
|
if (!sw_desc) {
|
|
xilinx_dpdma_chan_free_tx_desc(&tx_desc->vdesc);
|
|
return NULL;
|
|
}
|
|
|
|
xilinx_dpdma_sw_desc_set_dma_addrs(chan->xdev, sw_desc, sw_desc,
|
|
&xt->src_start, 1);
|
|
|
|
hw_desc = &sw_desc->hw;
|
|
hsize = ALIGN(hsize, XILINX_DPDMA_LINESIZE_ALIGN_BITS / 8);
|
|
hw_desc->xfer_size = hsize * xt->numf;
|
|
hw_desc->hsize_stride =
|
|
FIELD_PREP(XILINX_DPDMA_DESC_HSIZE_STRIDE_HSIZE_MASK, hsize) |
|
|
FIELD_PREP(XILINX_DPDMA_DESC_HSIZE_STRIDE_STRIDE_MASK,
|
|
stride / 16);
|
|
hw_desc->control |= XILINX_DPDMA_DESC_CONTROL_PREEMBLE;
|
|
hw_desc->control |= XILINX_DPDMA_DESC_CONTROL_COMPLETE_INTR;
|
|
hw_desc->control |= XILINX_DPDMA_DESC_CONTROL_IGNORE_DONE;
|
|
hw_desc->control |= XILINX_DPDMA_DESC_CONTROL_LAST_OF_FRAME;
|
|
|
|
list_add_tail(&sw_desc->node, &tx_desc->descriptors);
|
|
|
|
return tx_desc;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* DPDMA Channel Operations
|
|
*/
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_enable - Enable the channel
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Enable the channel and its interrupts. Set the QoS values for video class.
|
|
*/
|
|
static void xilinx_dpdma_chan_enable(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = (XILINX_DPDMA_INTR_CHAN_MASK << chan->id)
|
|
| XILINX_DPDMA_INTR_GLOBAL_MASK;
|
|
dpdma_write(chan->xdev->reg, XILINX_DPDMA_IEN, reg);
|
|
reg = (XILINX_DPDMA_EINTR_CHAN_ERR_MASK << chan->id)
|
|
| XILINX_DPDMA_INTR_GLOBAL_ERR;
|
|
dpdma_write(chan->xdev->reg, XILINX_DPDMA_EIEN, reg);
|
|
|
|
reg = XILINX_DPDMA_CH_CNTL_ENABLE
|
|
| FIELD_PREP(XILINX_DPDMA_CH_CNTL_QOS_DSCR_WR_MASK,
|
|
XILINX_DPDMA_CH_CNTL_QOS_VID_CLASS)
|
|
| FIELD_PREP(XILINX_DPDMA_CH_CNTL_QOS_DSCR_RD_MASK,
|
|
XILINX_DPDMA_CH_CNTL_QOS_VID_CLASS)
|
|
| FIELD_PREP(XILINX_DPDMA_CH_CNTL_QOS_DATA_RD_MASK,
|
|
XILINX_DPDMA_CH_CNTL_QOS_VID_CLASS);
|
|
dpdma_set(chan->reg, XILINX_DPDMA_CH_CNTL, reg);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_disable - Disable the channel
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Disable the channel and its interrupts.
|
|
*/
|
|
static void xilinx_dpdma_chan_disable(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = XILINX_DPDMA_INTR_CHAN_MASK << chan->id;
|
|
dpdma_write(chan->xdev->reg, XILINX_DPDMA_IEN, reg);
|
|
reg = XILINX_DPDMA_EINTR_CHAN_ERR_MASK << chan->id;
|
|
dpdma_write(chan->xdev->reg, XILINX_DPDMA_EIEN, reg);
|
|
|
|
dpdma_clr(chan->reg, XILINX_DPDMA_CH_CNTL, XILINX_DPDMA_CH_CNTL_ENABLE);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_pause - Pause the channel
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Pause the channel.
|
|
*/
|
|
static void xilinx_dpdma_chan_pause(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
dpdma_set(chan->reg, XILINX_DPDMA_CH_CNTL, XILINX_DPDMA_CH_CNTL_PAUSE);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_unpause - Unpause the channel
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Unpause the channel.
|
|
*/
|
|
static void xilinx_dpdma_chan_unpause(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
dpdma_clr(chan->reg, XILINX_DPDMA_CH_CNTL, XILINX_DPDMA_CH_CNTL_PAUSE);
|
|
}
|
|
|
|
static u32 xilinx_dpdma_chan_video_group_ready(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
struct xilinx_dpdma_device *xdev = chan->xdev;
|
|
u32 channels = 0;
|
|
unsigned int i;
|
|
|
|
for (i = ZYNQMP_DPDMA_VIDEO0; i <= ZYNQMP_DPDMA_VIDEO2; i++) {
|
|
if (xdev->chan[i]->video_group && !xdev->chan[i]->running)
|
|
return 0;
|
|
|
|
if (xdev->chan[i]->video_group)
|
|
channels |= BIT(i);
|
|
}
|
|
|
|
return channels;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_queue_transfer - Queue the next transfer
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Queue the next descriptor, if any, to the hardware. If the channel is
|
|
* stopped, start it first. Otherwise retrigger it with the next descriptor.
|
|
*/
|
|
static void xilinx_dpdma_chan_queue_transfer(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
struct xilinx_dpdma_device *xdev = chan->xdev;
|
|
struct xilinx_dpdma_sw_desc *sw_desc;
|
|
struct xilinx_dpdma_tx_desc *desc;
|
|
struct virt_dma_desc *vdesc;
|
|
u32 reg, channels;
|
|
|
|
lockdep_assert_held(&chan->lock);
|
|
|
|
if (chan->desc.pending)
|
|
return;
|
|
|
|
if (!chan->running) {
|
|
xilinx_dpdma_chan_unpause(chan);
|
|
xilinx_dpdma_chan_enable(chan);
|
|
chan->first_frame = true;
|
|
chan->running = true;
|
|
}
|
|
|
|
if (chan->video_group)
|
|
channels = xilinx_dpdma_chan_video_group_ready(chan);
|
|
else
|
|
channels = BIT(chan->id);
|
|
|
|
if (!channels)
|
|
return;
|
|
|
|
vdesc = vchan_next_desc(&chan->vchan);
|
|
if (!vdesc)
|
|
return;
|
|
|
|
desc = to_dpdma_tx_desc(vdesc);
|
|
chan->desc.pending = desc;
|
|
list_del(&desc->vdesc.node);
|
|
|
|
/*
|
|
* Assign the cookie to descriptors in this transaction. Only 16 bit
|
|
* will be used, but it should be enough.
|
|
*/
|
|
list_for_each_entry(sw_desc, &desc->descriptors, node)
|
|
sw_desc->hw.desc_id = desc->vdesc.tx.cookie;
|
|
|
|
sw_desc = list_first_entry(&desc->descriptors,
|
|
struct xilinx_dpdma_sw_desc, node);
|
|
dpdma_write(chan->reg, XILINX_DPDMA_CH_DESC_START_ADDR,
|
|
lower_32_bits(sw_desc->dma_addr));
|
|
if (xdev->ext_addr)
|
|
dpdma_write(chan->reg, XILINX_DPDMA_CH_DESC_START_ADDRE,
|
|
FIELD_PREP(XILINX_DPDMA_CH_DESC_START_ADDRE_MASK,
|
|
upper_32_bits(sw_desc->dma_addr)));
|
|
|
|
if (chan->first_frame)
|
|
reg = XILINX_DPDMA_GBL_TRIG_MASK(channels);
|
|
else
|
|
reg = XILINX_DPDMA_GBL_RETRIG_MASK(channels);
|
|
|
|
chan->first_frame = false;
|
|
|
|
dpdma_write(xdev->reg, XILINX_DPDMA_GBL, reg);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_ostand - Number of outstanding transactions
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Read and return the number of outstanding transactions from register.
|
|
*
|
|
* Return: Number of outstanding transactions from the status register.
|
|
*/
|
|
static u32 xilinx_dpdma_chan_ostand(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
return FIELD_GET(XILINX_DPDMA_CH_STATUS_OTRAN_CNT_MASK,
|
|
dpdma_read(chan->reg, XILINX_DPDMA_CH_STATUS));
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_no_ostand - Notify no outstanding transaction event
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Notify waiters for no outstanding event, so waiters can stop the channel
|
|
* safely. This function is supposed to be called when 'no outstanding'
|
|
* interrupt is generated. The 'no outstanding' interrupt is disabled and
|
|
* should be re-enabled when this event is handled. If the channel status
|
|
* register still shows some number of outstanding transactions, the interrupt
|
|
* remains enabled.
|
|
*
|
|
* Return: 0 on success. On failure, -EWOULDBLOCK if there's still outstanding
|
|
* transaction(s).
|
|
*/
|
|
static int xilinx_dpdma_chan_notify_no_ostand(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
u32 cnt;
|
|
|
|
cnt = xilinx_dpdma_chan_ostand(chan);
|
|
if (cnt) {
|
|
dev_dbg(chan->xdev->dev, "%d outstanding transactions\n", cnt);
|
|
return -EWOULDBLOCK;
|
|
}
|
|
|
|
/* Disable 'no outstanding' interrupt */
|
|
dpdma_write(chan->xdev->reg, XILINX_DPDMA_IDS,
|
|
XILINX_DPDMA_INTR_NO_OSTAND(chan->id));
|
|
wake_up(&chan->wait_to_stop);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_wait_no_ostand - Wait for the no outstanding irq
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Wait for the no outstanding transaction interrupt. This functions can sleep
|
|
* for 50ms.
|
|
*
|
|
* Return: 0 on success. On failure, -ETIMEOUT for time out, or the error code
|
|
* from wait_event_interruptible_timeout().
|
|
*/
|
|
static int xilinx_dpdma_chan_wait_no_ostand(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
int ret;
|
|
|
|
/* Wait for a no outstanding transaction interrupt upto 50msec */
|
|
ret = wait_event_interruptible_timeout(chan->wait_to_stop,
|
|
!xilinx_dpdma_chan_ostand(chan),
|
|
msecs_to_jiffies(50));
|
|
if (ret > 0) {
|
|
dpdma_write(chan->xdev->reg, XILINX_DPDMA_IEN,
|
|
XILINX_DPDMA_INTR_NO_OSTAND(chan->id));
|
|
return 0;
|
|
}
|
|
|
|
dev_err(chan->xdev->dev, "not ready to stop: %d trans\n",
|
|
xilinx_dpdma_chan_ostand(chan));
|
|
|
|
if (ret == 0)
|
|
return -ETIMEDOUT;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_poll_no_ostand - Poll the outstanding transaction status
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Poll the outstanding transaction status, and return when there's no
|
|
* outstanding transaction. This functions can be used in the interrupt context
|
|
* or where the atomicity is required. Calling thread may wait more than 50ms.
|
|
*
|
|
* Return: 0 on success, or -ETIMEDOUT.
|
|
*/
|
|
static int xilinx_dpdma_chan_poll_no_ostand(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
u32 cnt, loop = 50000;
|
|
|
|
/* Poll at least for 50ms (20 fps). */
|
|
do {
|
|
cnt = xilinx_dpdma_chan_ostand(chan);
|
|
udelay(1);
|
|
} while (loop-- > 0 && cnt);
|
|
|
|
if (loop) {
|
|
dpdma_write(chan->xdev->reg, XILINX_DPDMA_IEN,
|
|
XILINX_DPDMA_INTR_NO_OSTAND(chan->id));
|
|
return 0;
|
|
}
|
|
|
|
dev_err(chan->xdev->dev, "not ready to stop: %d trans\n",
|
|
xilinx_dpdma_chan_ostand(chan));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_stop - Stop the channel
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Stop a previously paused channel by first waiting for completion of all
|
|
* outstanding transaction and then disabling the channel.
|
|
*
|
|
* Return: 0 on success, or -ETIMEDOUT if the channel failed to stop.
|
|
*/
|
|
static int xilinx_dpdma_chan_stop(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
ret = xilinx_dpdma_chan_wait_no_ostand(chan);
|
|
if (ret)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
xilinx_dpdma_chan_disable(chan);
|
|
chan->running = false;
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_done_irq - Handle hardware descriptor completion
|
|
* @chan: DPDMA channel
|
|
*
|
|
* Handle completion of the currently active descriptor (@chan->desc.active). As
|
|
* we currently support cyclic transfers only, this just invokes the cyclic
|
|
* callback. The descriptor will be completed at the VSYNC interrupt when a new
|
|
* descriptor replaces it.
|
|
*/
|
|
static void xilinx_dpdma_chan_done_irq(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
struct xilinx_dpdma_tx_desc *active = chan->desc.active;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
if (active)
|
|
vchan_cyclic_callback(&active->vdesc);
|
|
else
|
|
dev_warn(chan->xdev->dev,
|
|
"DONE IRQ with no active descriptor!\n");
|
|
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_vsync_irq - Handle hardware descriptor scheduling
|
|
* @chan: DPDMA channel
|
|
*
|
|
* At VSYNC the active descriptor may have been replaced by the pending
|
|
* descriptor. Detect this through the DESC_ID and perform appropriate
|
|
* bookkeeping.
|
|
*/
|
|
static void xilinx_dpdma_chan_vsync_irq(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
struct xilinx_dpdma_tx_desc *pending;
|
|
struct xilinx_dpdma_sw_desc *sw_desc;
|
|
unsigned long flags;
|
|
u32 desc_id;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
pending = chan->desc.pending;
|
|
if (!chan->running || !pending)
|
|
goto out;
|
|
|
|
desc_id = dpdma_read(chan->reg, XILINX_DPDMA_CH_DESC_ID);
|
|
|
|
/* If the retrigger raced with vsync, retry at the next frame. */
|
|
sw_desc = list_first_entry(&pending->descriptors,
|
|
struct xilinx_dpdma_sw_desc, node);
|
|
if (sw_desc->hw.desc_id != desc_id)
|
|
goto out;
|
|
|
|
/*
|
|
* Complete the active descriptor, if any, promote the pending
|
|
* descriptor to active, and queue the next transfer, if any.
|
|
*/
|
|
if (chan->desc.active)
|
|
vchan_cookie_complete(&chan->desc.active->vdesc);
|
|
chan->desc.active = pending;
|
|
chan->desc.pending = NULL;
|
|
|
|
xilinx_dpdma_chan_queue_transfer(chan);
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_err - Detect any channel error
|
|
* @chan: DPDMA channel
|
|
* @isr: masked Interrupt Status Register
|
|
* @eisr: Error Interrupt Status Register
|
|
*
|
|
* Return: true if any channel error occurs, or false otherwise.
|
|
*/
|
|
static bool
|
|
xilinx_dpdma_chan_err(struct xilinx_dpdma_chan *chan, u32 isr, u32 eisr)
|
|
{
|
|
if (!chan)
|
|
return false;
|
|
|
|
if (chan->running &&
|
|
((isr & (XILINX_DPDMA_INTR_CHAN_ERR_MASK << chan->id)) ||
|
|
(eisr & (XILINX_DPDMA_EINTR_CHAN_ERR_MASK << chan->id))))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_handle_err - DPDMA channel error handling
|
|
* @chan: DPDMA channel
|
|
*
|
|
* This function is called when any channel error or any global error occurs.
|
|
* The function disables the paused channel by errors and determines
|
|
* if the current active descriptor can be rescheduled depending on
|
|
* the descriptor status.
|
|
*/
|
|
static void xilinx_dpdma_chan_handle_err(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
struct xilinx_dpdma_device *xdev = chan->xdev;
|
|
struct xilinx_dpdma_tx_desc *active;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
dev_dbg(xdev->dev, "cur desc addr = 0x%04x%08x\n",
|
|
dpdma_read(chan->reg, XILINX_DPDMA_CH_DESC_START_ADDRE),
|
|
dpdma_read(chan->reg, XILINX_DPDMA_CH_DESC_START_ADDR));
|
|
dev_dbg(xdev->dev, "cur payload addr = 0x%04x%08x\n",
|
|
dpdma_read(chan->reg, XILINX_DPDMA_CH_PYLD_CUR_ADDRE),
|
|
dpdma_read(chan->reg, XILINX_DPDMA_CH_PYLD_CUR_ADDR));
|
|
|
|
xilinx_dpdma_chan_disable(chan);
|
|
chan->running = false;
|
|
|
|
if (!chan->desc.active)
|
|
goto out_unlock;
|
|
|
|
active = chan->desc.active;
|
|
chan->desc.active = NULL;
|
|
|
|
xilinx_dpdma_chan_dump_tx_desc(chan, active);
|
|
|
|
if (active->error)
|
|
dev_dbg(xdev->dev, "repeated error on desc\n");
|
|
|
|
/* Reschedule if there's no new descriptor */
|
|
if (!chan->desc.pending &&
|
|
list_empty(&chan->vchan.desc_issued)) {
|
|
active->error = true;
|
|
list_add_tail(&active->vdesc.node,
|
|
&chan->vchan.desc_issued);
|
|
} else {
|
|
xilinx_dpdma_chan_free_tx_desc(&active->vdesc);
|
|
}
|
|
|
|
out_unlock:
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* DMA Engine Operations
|
|
*/
|
|
|
|
static struct dma_async_tx_descriptor *
|
|
xilinx_dpdma_prep_interleaved_dma(struct dma_chan *dchan,
|
|
struct dma_interleaved_template *xt,
|
|
unsigned long flags)
|
|
{
|
|
struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan);
|
|
struct xilinx_dpdma_tx_desc *desc;
|
|
|
|
if (xt->dir != DMA_MEM_TO_DEV)
|
|
return NULL;
|
|
|
|
if (!xt->numf || !xt->sgl[0].size)
|
|
return NULL;
|
|
|
|
if (!(flags & DMA_PREP_REPEAT) || !(flags & DMA_PREP_LOAD_EOT))
|
|
return NULL;
|
|
|
|
desc = xilinx_dpdma_chan_prep_interleaved_dma(chan, xt);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
vchan_tx_prep(&chan->vchan, &desc->vdesc, flags | DMA_CTRL_ACK);
|
|
|
|
return &desc->vdesc.tx;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_alloc_chan_resources - Allocate resources for the channel
|
|
* @dchan: DMA channel
|
|
*
|
|
* Allocate a descriptor pool for the channel.
|
|
*
|
|
* Return: 0 on success, or -ENOMEM if failed to allocate a pool.
|
|
*/
|
|
static int xilinx_dpdma_alloc_chan_resources(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan);
|
|
size_t align = __alignof__(struct xilinx_dpdma_sw_desc);
|
|
|
|
chan->desc_pool = dma_pool_create(dev_name(chan->xdev->dev),
|
|
chan->xdev->dev,
|
|
sizeof(struct xilinx_dpdma_sw_desc),
|
|
align, 0);
|
|
if (!chan->desc_pool) {
|
|
dev_err(chan->xdev->dev,
|
|
"failed to allocate a descriptor pool\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_free_chan_resources - Free all resources for the channel
|
|
* @dchan: DMA channel
|
|
*
|
|
* Free resources associated with the virtual DMA channel, and destroy the
|
|
* descriptor pool.
|
|
*/
|
|
static void xilinx_dpdma_free_chan_resources(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan);
|
|
|
|
vchan_free_chan_resources(&chan->vchan);
|
|
|
|
dma_pool_destroy(chan->desc_pool);
|
|
chan->desc_pool = NULL;
|
|
}
|
|
|
|
static void xilinx_dpdma_issue_pending(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
if (vchan_issue_pending(&chan->vchan))
|
|
xilinx_dpdma_chan_queue_transfer(chan);
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
}
|
|
|
|
static int xilinx_dpdma_config(struct dma_chan *dchan,
|
|
struct dma_slave_config *config)
|
|
{
|
|
struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan);
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* The destination address doesn't need to be specified as the DPDMA is
|
|
* hardwired to the destination (the DP controller). The transfer
|
|
* width, burst size and port window size are thus meaningless, they're
|
|
* fixed both on the DPDMA side and on the DP controller side.
|
|
*/
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
/*
|
|
* Abuse the slave_id to indicate that the channel is part of a video
|
|
* group.
|
|
*/
|
|
if (chan->id <= ZYNQMP_DPDMA_VIDEO2)
|
|
chan->video_group = config->slave_id != 0;
|
|
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xilinx_dpdma_pause(struct dma_chan *dchan)
|
|
{
|
|
xilinx_dpdma_chan_pause(to_xilinx_chan(dchan));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xilinx_dpdma_resume(struct dma_chan *dchan)
|
|
{
|
|
xilinx_dpdma_chan_unpause(to_xilinx_chan(dchan));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_terminate_all - Terminate the channel and descriptors
|
|
* @dchan: DMA channel
|
|
*
|
|
* Pause the channel without waiting for ongoing transfers to complete. Waiting
|
|
* for completion is performed by xilinx_dpdma_synchronize() that will disable
|
|
* the channel to complete the stop.
|
|
*
|
|
* All the descriptors associated with the channel that are guaranteed not to
|
|
* be touched by the hardware. The pending and active descriptor are not
|
|
* touched, and will be freed either upon completion, or by
|
|
* xilinx_dpdma_synchronize().
|
|
*
|
|
* Return: 0 on success, or -ETIMEDOUT if the channel failed to stop.
|
|
*/
|
|
static int xilinx_dpdma_terminate_all(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan);
|
|
struct xilinx_dpdma_device *xdev = chan->xdev;
|
|
LIST_HEAD(descriptors);
|
|
unsigned long flags;
|
|
unsigned int i;
|
|
|
|
/* Pause the channel (including the whole video group if applicable). */
|
|
if (chan->video_group) {
|
|
for (i = ZYNQMP_DPDMA_VIDEO0; i <= ZYNQMP_DPDMA_VIDEO2; i++) {
|
|
if (xdev->chan[i]->video_group &&
|
|
xdev->chan[i]->running) {
|
|
xilinx_dpdma_chan_pause(xdev->chan[i]);
|
|
xdev->chan[i]->video_group = false;
|
|
}
|
|
}
|
|
} else {
|
|
xilinx_dpdma_chan_pause(chan);
|
|
}
|
|
|
|
/* Gather all the descriptors we can free and free them. */
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
vchan_get_all_descriptors(&chan->vchan, &descriptors);
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
|
|
vchan_dma_desc_free_list(&chan->vchan, &descriptors);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_synchronize - Synchronize callback execution
|
|
* @dchan: DMA channel
|
|
*
|
|
* Synchronizing callback execution ensures that all previously issued
|
|
* transfers have completed and all associated callbacks have been called and
|
|
* have returned.
|
|
*
|
|
* This function waits for the DMA channel to stop. It assumes it has been
|
|
* paused by a previous call to dmaengine_terminate_async(), and that no new
|
|
* pending descriptors have been issued with dma_async_issue_pending(). The
|
|
* behaviour is undefined otherwise.
|
|
*/
|
|
static void xilinx_dpdma_synchronize(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan);
|
|
unsigned long flags;
|
|
|
|
xilinx_dpdma_chan_stop(chan);
|
|
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
if (chan->desc.pending) {
|
|
vchan_terminate_vdesc(&chan->desc.pending->vdesc);
|
|
chan->desc.pending = NULL;
|
|
}
|
|
if (chan->desc.active) {
|
|
vchan_terminate_vdesc(&chan->desc.active->vdesc);
|
|
chan->desc.active = NULL;
|
|
}
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
|
|
vchan_synchronize(&chan->vchan);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Interrupt and Tasklet Handling
|
|
*/
|
|
|
|
/**
|
|
* xilinx_dpdma_err - Detect any global error
|
|
* @isr: Interrupt Status Register
|
|
* @eisr: Error Interrupt Status Register
|
|
*
|
|
* Return: True if any global error occurs, or false otherwise.
|
|
*/
|
|
static bool xilinx_dpdma_err(u32 isr, u32 eisr)
|
|
{
|
|
if (isr & XILINX_DPDMA_INTR_GLOBAL_ERR ||
|
|
eisr & XILINX_DPDMA_EINTR_GLOBAL_ERR)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_handle_err_irq - Handle DPDMA error interrupt
|
|
* @xdev: DPDMA device
|
|
* @isr: masked Interrupt Status Register
|
|
* @eisr: Error Interrupt Status Register
|
|
*
|
|
* Handle if any error occurs based on @isr and @eisr. This function disables
|
|
* corresponding error interrupts, and those should be re-enabled once handling
|
|
* is done.
|
|
*/
|
|
static void xilinx_dpdma_handle_err_irq(struct xilinx_dpdma_device *xdev,
|
|
u32 isr, u32 eisr)
|
|
{
|
|
bool err = xilinx_dpdma_err(isr, eisr);
|
|
unsigned int i;
|
|
|
|
dev_dbg_ratelimited(xdev->dev,
|
|
"error irq: isr = 0x%08x, eisr = 0x%08x\n",
|
|
isr, eisr);
|
|
|
|
/* Disable channel error interrupts until errors are handled. */
|
|
dpdma_write(xdev->reg, XILINX_DPDMA_IDS,
|
|
isr & ~XILINX_DPDMA_INTR_GLOBAL_ERR);
|
|
dpdma_write(xdev->reg, XILINX_DPDMA_EIDS,
|
|
eisr & ~XILINX_DPDMA_EINTR_GLOBAL_ERR);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(xdev->chan); i++)
|
|
if (err || xilinx_dpdma_chan_err(xdev->chan[i], isr, eisr))
|
|
tasklet_schedule(&xdev->chan[i]->err_task);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_enable_irq - Enable interrupts
|
|
* @xdev: DPDMA device
|
|
*
|
|
* Enable interrupts.
|
|
*/
|
|
static void xilinx_dpdma_enable_irq(struct xilinx_dpdma_device *xdev)
|
|
{
|
|
dpdma_write(xdev->reg, XILINX_DPDMA_IEN, XILINX_DPDMA_INTR_ALL);
|
|
dpdma_write(xdev->reg, XILINX_DPDMA_EIEN, XILINX_DPDMA_EINTR_ALL);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_disable_irq - Disable interrupts
|
|
* @xdev: DPDMA device
|
|
*
|
|
* Disable interrupts.
|
|
*/
|
|
static void xilinx_dpdma_disable_irq(struct xilinx_dpdma_device *xdev)
|
|
{
|
|
dpdma_write(xdev->reg, XILINX_DPDMA_IDS, XILINX_DPDMA_INTR_ERR_ALL);
|
|
dpdma_write(xdev->reg, XILINX_DPDMA_EIDS, XILINX_DPDMA_EINTR_ALL);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dpdma_chan_err_task - Per channel tasklet for error handling
|
|
* @data: tasklet data to be casted to DPDMA channel structure
|
|
*
|
|
* Per channel error handling tasklet. This function waits for the outstanding
|
|
* transaction to complete and triggers error handling. After error handling,
|
|
* re-enable channel error interrupts, and restart the channel if needed.
|
|
*/
|
|
static void xilinx_dpdma_chan_err_task(unsigned long data)
|
|
{
|
|
struct xilinx_dpdma_chan *chan = (struct xilinx_dpdma_chan *)data;
|
|
struct xilinx_dpdma_device *xdev = chan->xdev;
|
|
unsigned long flags;
|
|
|
|
/* Proceed error handling even when polling fails. */
|
|
xilinx_dpdma_chan_poll_no_ostand(chan);
|
|
|
|
xilinx_dpdma_chan_handle_err(chan);
|
|
|
|
dpdma_write(xdev->reg, XILINX_DPDMA_IEN,
|
|
XILINX_DPDMA_INTR_CHAN_ERR_MASK << chan->id);
|
|
dpdma_write(xdev->reg, XILINX_DPDMA_EIEN,
|
|
XILINX_DPDMA_EINTR_CHAN_ERR_MASK << chan->id);
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
xilinx_dpdma_chan_queue_transfer(chan);
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
}
|
|
|
|
static irqreturn_t xilinx_dpdma_irq_handler(int irq, void *data)
|
|
{
|
|
struct xilinx_dpdma_device *xdev = data;
|
|
unsigned long mask;
|
|
unsigned int i;
|
|
u32 status;
|
|
u32 error;
|
|
|
|
status = dpdma_read(xdev->reg, XILINX_DPDMA_ISR);
|
|
error = dpdma_read(xdev->reg, XILINX_DPDMA_EISR);
|
|
if (!status && !error)
|
|
return IRQ_NONE;
|
|
|
|
dpdma_write(xdev->reg, XILINX_DPDMA_ISR, status);
|
|
dpdma_write(xdev->reg, XILINX_DPDMA_EISR, error);
|
|
|
|
if (status & XILINX_DPDMA_INTR_VSYNC) {
|
|
/*
|
|
* There's a single VSYNC interrupt that needs to be processed
|
|
* by each running channel to update the active descriptor.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(xdev->chan); i++) {
|
|
struct xilinx_dpdma_chan *chan = xdev->chan[i];
|
|
|
|
if (chan)
|
|
xilinx_dpdma_chan_vsync_irq(chan);
|
|
}
|
|
}
|
|
|
|
mask = FIELD_GET(XILINX_DPDMA_INTR_DESC_DONE_MASK, status);
|
|
if (mask) {
|
|
for_each_set_bit(i, &mask, ARRAY_SIZE(xdev->chan))
|
|
xilinx_dpdma_chan_done_irq(xdev->chan[i]);
|
|
}
|
|
|
|
mask = FIELD_GET(XILINX_DPDMA_INTR_NO_OSTAND_MASK, status);
|
|
if (mask) {
|
|
for_each_set_bit(i, &mask, ARRAY_SIZE(xdev->chan))
|
|
xilinx_dpdma_chan_notify_no_ostand(xdev->chan[i]);
|
|
}
|
|
|
|
mask = status & XILINX_DPDMA_INTR_ERR_ALL;
|
|
if (mask || error)
|
|
xilinx_dpdma_handle_err_irq(xdev, mask, error);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Initialization & Cleanup
|
|
*/
|
|
|
|
static int xilinx_dpdma_chan_init(struct xilinx_dpdma_device *xdev,
|
|
unsigned int chan_id)
|
|
{
|
|
struct xilinx_dpdma_chan *chan;
|
|
|
|
chan = devm_kzalloc(xdev->dev, sizeof(*chan), GFP_KERNEL);
|
|
if (!chan)
|
|
return -ENOMEM;
|
|
|
|
chan->id = chan_id;
|
|
chan->reg = xdev->reg + XILINX_DPDMA_CH_BASE
|
|
+ XILINX_DPDMA_CH_OFFSET * chan->id;
|
|
chan->running = false;
|
|
chan->xdev = xdev;
|
|
|
|
spin_lock_init(&chan->lock);
|
|
init_waitqueue_head(&chan->wait_to_stop);
|
|
|
|
tasklet_init(&chan->err_task, xilinx_dpdma_chan_err_task,
|
|
(unsigned long)chan);
|
|
|
|
chan->vchan.desc_free = xilinx_dpdma_chan_free_tx_desc;
|
|
vchan_init(&chan->vchan, &xdev->common);
|
|
|
|
xdev->chan[chan->id] = chan;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void xilinx_dpdma_chan_remove(struct xilinx_dpdma_chan *chan)
|
|
{
|
|
if (!chan)
|
|
return;
|
|
|
|
tasklet_kill(&chan->err_task);
|
|
list_del(&chan->vchan.chan.device_node);
|
|
}
|
|
|
|
static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct xilinx_dpdma_device *xdev = ofdma->of_dma_data;
|
|
uint32_t chan_id = dma_spec->args[0];
|
|
|
|
if (chan_id >= ARRAY_SIZE(xdev->chan))
|
|
return NULL;
|
|
|
|
if (!xdev->chan[chan_id])
|
|
return NULL;
|
|
|
|
return dma_get_slave_channel(&xdev->chan[chan_id]->vchan.chan);
|
|
}
|
|
|
|
static int xilinx_dpdma_probe(struct platform_device *pdev)
|
|
{
|
|
struct xilinx_dpdma_device *xdev;
|
|
struct dma_device *ddev;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL);
|
|
if (!xdev)
|
|
return -ENOMEM;
|
|
|
|
xdev->dev = &pdev->dev;
|
|
xdev->ext_addr = sizeof(dma_addr_t) > 4;
|
|
|
|
INIT_LIST_HEAD(&xdev->common.channels);
|
|
|
|
platform_set_drvdata(pdev, xdev);
|
|
|
|
xdev->axi_clk = devm_clk_get(xdev->dev, "axi_clk");
|
|
if (IS_ERR(xdev->axi_clk))
|
|
return PTR_ERR(xdev->axi_clk);
|
|
|
|
xdev->reg = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(xdev->reg))
|
|
return PTR_ERR(xdev->reg);
|
|
|
|
xdev->irq = platform_get_irq(pdev, 0);
|
|
if (xdev->irq < 0) {
|
|
dev_err(xdev->dev, "failed to get platform irq\n");
|
|
return xdev->irq;
|
|
}
|
|
|
|
ret = request_irq(xdev->irq, xilinx_dpdma_irq_handler, IRQF_SHARED,
|
|
dev_name(xdev->dev), xdev);
|
|
if (ret) {
|
|
dev_err(xdev->dev, "failed to request IRQ\n");
|
|
return ret;
|
|
}
|
|
|
|
ddev = &xdev->common;
|
|
ddev->dev = &pdev->dev;
|
|
|
|
dma_cap_set(DMA_SLAVE, ddev->cap_mask);
|
|
dma_cap_set(DMA_PRIVATE, ddev->cap_mask);
|
|
dma_cap_set(DMA_INTERLEAVE, ddev->cap_mask);
|
|
dma_cap_set(DMA_REPEAT, ddev->cap_mask);
|
|
dma_cap_set(DMA_LOAD_EOT, ddev->cap_mask);
|
|
ddev->copy_align = fls(XILINX_DPDMA_ALIGN_BYTES - 1);
|
|
|
|
ddev->device_alloc_chan_resources = xilinx_dpdma_alloc_chan_resources;
|
|
ddev->device_free_chan_resources = xilinx_dpdma_free_chan_resources;
|
|
ddev->device_prep_interleaved_dma = xilinx_dpdma_prep_interleaved_dma;
|
|
/* TODO: Can we achieve better granularity ? */
|
|
ddev->device_tx_status = dma_cookie_status;
|
|
ddev->device_issue_pending = xilinx_dpdma_issue_pending;
|
|
ddev->device_config = xilinx_dpdma_config;
|
|
ddev->device_pause = xilinx_dpdma_pause;
|
|
ddev->device_resume = xilinx_dpdma_resume;
|
|
ddev->device_terminate_all = xilinx_dpdma_terminate_all;
|
|
ddev->device_synchronize = xilinx_dpdma_synchronize;
|
|
ddev->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED);
|
|
ddev->directions = BIT(DMA_MEM_TO_DEV);
|
|
ddev->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(xdev->chan); ++i) {
|
|
ret = xilinx_dpdma_chan_init(xdev, i);
|
|
if (ret < 0) {
|
|
dev_err(xdev->dev, "failed to initialize channel %u\n",
|
|
i);
|
|
goto error;
|
|
}
|
|
}
|
|
|
|
ret = clk_prepare_enable(xdev->axi_clk);
|
|
if (ret) {
|
|
dev_err(xdev->dev, "failed to enable the axi clock\n");
|
|
goto error;
|
|
}
|
|
|
|
ret = dma_async_device_register(ddev);
|
|
if (ret) {
|
|
dev_err(xdev->dev, "failed to register the dma device\n");
|
|
goto error_dma_async;
|
|
}
|
|
|
|
ret = of_dma_controller_register(xdev->dev->of_node,
|
|
of_dma_xilinx_xlate, ddev);
|
|
if (ret) {
|
|
dev_err(xdev->dev, "failed to register DMA to DT DMA helper\n");
|
|
goto error_of_dma;
|
|
}
|
|
|
|
xilinx_dpdma_enable_irq(xdev);
|
|
|
|
dev_info(&pdev->dev, "Xilinx DPDMA engine is probed\n");
|
|
|
|
return 0;
|
|
|
|
error_of_dma:
|
|
dma_async_device_unregister(ddev);
|
|
error_dma_async:
|
|
clk_disable_unprepare(xdev->axi_clk);
|
|
error:
|
|
for (i = 0; i < ARRAY_SIZE(xdev->chan); i++)
|
|
xilinx_dpdma_chan_remove(xdev->chan[i]);
|
|
|
|
free_irq(xdev->irq, xdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int xilinx_dpdma_remove(struct platform_device *pdev)
|
|
{
|
|
struct xilinx_dpdma_device *xdev = platform_get_drvdata(pdev);
|
|
unsigned int i;
|
|
|
|
/* Start by disabling the IRQ to avoid races during cleanup. */
|
|
free_irq(xdev->irq, xdev);
|
|
|
|
xilinx_dpdma_disable_irq(xdev);
|
|
of_dma_controller_free(pdev->dev.of_node);
|
|
dma_async_device_unregister(&xdev->common);
|
|
clk_disable_unprepare(xdev->axi_clk);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(xdev->chan); i++)
|
|
xilinx_dpdma_chan_remove(xdev->chan[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id xilinx_dpdma_of_match[] = {
|
|
{ .compatible = "xlnx,zynqmp-dpdma",},
|
|
{ /* end of table */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, xilinx_dpdma_of_match);
|
|
|
|
static struct platform_driver xilinx_dpdma_driver = {
|
|
.probe = xilinx_dpdma_probe,
|
|
.remove = xilinx_dpdma_remove,
|
|
.driver = {
|
|
.name = "xilinx-zynqmp-dpdma",
|
|
.of_match_table = xilinx_dpdma_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(xilinx_dpdma_driver);
|
|
|
|
MODULE_AUTHOR("Xilinx, Inc.");
|
|
MODULE_DESCRIPTION("Xilinx ZynqMP DPDMA driver");
|
|
MODULE_LICENSE("GPL v2");
|