mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-11 13:04:03 +08:00
c3cc5c59cb
The remove and suspend callbacks disable the operation of the unit. Do the same in probe() in case of error. While at it, introduce a helper function rzv2m_i2c_disable() for disabling the operation of the unit and this function is shared between probe error path, remove and suspend callbacks. Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
546 lines
12 KiB
C
546 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Driver for the Renesas RZ/V2M I2C unit
|
|
*
|
|
* Copyright (C) 2016-2022 Renesas Electronics Corporation
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/reset.h>
|
|
|
|
/* Register offsets */
|
|
#define IICB0DAT 0x00 /* Data Register */
|
|
#define IICB0CTL0 0x08 /* Control Register 0 */
|
|
#define IICB0TRG 0x0C /* Trigger Register */
|
|
#define IICB0STR0 0x10 /* Status Register 0 */
|
|
#define IICB0CTL1 0x20 /* Control Register 1 */
|
|
#define IICB0WL 0x24 /* Low Level Width Setting Reg */
|
|
#define IICB0WH 0x28 /* How Level Width Setting Reg */
|
|
|
|
/* IICB0CTL0 */
|
|
#define IICB0IICE BIT(7) /* I2C Enable */
|
|
#define IICB0SLWT BIT(1) /* Interrupt Request Timing */
|
|
#define IICB0SLAC BIT(0) /* Acknowledge */
|
|
|
|
/* IICB0TRG */
|
|
#define IICB0WRET BIT(2) /* Quit Wait Trigger */
|
|
#define IICB0STT BIT(1) /* Create Start Condition Trigger */
|
|
#define IICB0SPT BIT(0) /* Create Stop Condition Trigger */
|
|
|
|
/* IICB0STR0 */
|
|
#define IICB0SSAC BIT(8) /* Ack Flag */
|
|
#define IICB0SSBS BIT(6) /* Bus Flag */
|
|
#define IICB0SSSP BIT(4) /* Stop Condition Flag */
|
|
|
|
/* IICB0CTL1 */
|
|
#define IICB0MDSC BIT(7) /* Bus Mode */
|
|
#define IICB0SLSE BIT(1) /* Start condition output */
|
|
|
|
struct rzv2m_i2c_priv {
|
|
void __iomem *base;
|
|
struct i2c_adapter adap;
|
|
struct clk *clk;
|
|
int bus_mode;
|
|
struct completion msg_tia_done;
|
|
u32 iicb0wl;
|
|
u32 iicb0wh;
|
|
};
|
|
|
|
enum bcr_index {
|
|
RZV2M_I2C_100K = 0,
|
|
RZV2M_I2C_400K,
|
|
};
|
|
|
|
struct bitrate_config {
|
|
unsigned int percent_low;
|
|
unsigned int min_hold_time_ns;
|
|
};
|
|
|
|
static const struct bitrate_config bitrate_configs[] = {
|
|
[RZV2M_I2C_100K] = { 47, 3450 },
|
|
[RZV2M_I2C_400K] = { 52, 900 },
|
|
};
|
|
|
|
static inline void bit_setl(void __iomem *addr, u32 val)
|
|
{
|
|
writel(readl(addr) | val, addr);
|
|
}
|
|
|
|
static inline void bit_clrl(void __iomem *addr, u32 val)
|
|
{
|
|
writel(readl(addr) & ~val, addr);
|
|
}
|
|
|
|
static irqreturn_t rzv2m_i2c_tia_irq_handler(int this_irq, void *dev_id)
|
|
{
|
|
struct rzv2m_i2c_priv *priv = dev_id;
|
|
|
|
complete(&priv->msg_tia_done);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Calculate IICB0WL and IICB0WH */
|
|
static int rzv2m_i2c_clock_calculate(struct device *dev,
|
|
struct rzv2m_i2c_priv *priv)
|
|
{
|
|
const struct bitrate_config *config;
|
|
unsigned int hold_time_ns;
|
|
unsigned int total_pclks;
|
|
unsigned int trf_pclks;
|
|
unsigned long pclk_hz;
|
|
struct i2c_timings t;
|
|
u32 trf_ns;
|
|
|
|
i2c_parse_fw_timings(dev, &t, true);
|
|
|
|
pclk_hz = clk_get_rate(priv->clk);
|
|
total_pclks = pclk_hz / t.bus_freq_hz;
|
|
|
|
trf_ns = t.scl_rise_ns + t.scl_fall_ns;
|
|
trf_pclks = mul_u64_u32_div(pclk_hz, trf_ns, NSEC_PER_SEC);
|
|
|
|
/* Config setting */
|
|
switch (t.bus_freq_hz) {
|
|
case I2C_MAX_FAST_MODE_FREQ:
|
|
priv->bus_mode = RZV2M_I2C_400K;
|
|
break;
|
|
case I2C_MAX_STANDARD_MODE_FREQ:
|
|
priv->bus_mode = RZV2M_I2C_100K;
|
|
break;
|
|
default:
|
|
dev_err(dev, "transfer speed is invalid\n");
|
|
return -EINVAL;
|
|
}
|
|
config = &bitrate_configs[priv->bus_mode];
|
|
|
|
/* IICB0WL = (percent_low / Transfer clock) x PCLK */
|
|
priv->iicb0wl = total_pclks * config->percent_low / 100;
|
|
if (priv->iicb0wl > (BIT(10) - 1))
|
|
return -EINVAL;
|
|
|
|
/* IICB0WH = ((percent_high / Transfer clock) x PCLK) - (tR + tF) */
|
|
priv->iicb0wh = total_pclks - priv->iicb0wl - trf_pclks;
|
|
if (priv->iicb0wh > (BIT(10) - 1))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Data hold time must be less than 0.9us in fast mode and
|
|
* 3.45us in standard mode.
|
|
* Data hold time = IICB0WL[9:2] / PCLK
|
|
*/
|
|
hold_time_ns = div64_ul((u64)(priv->iicb0wl >> 2) * NSEC_PER_SEC, pclk_hz);
|
|
if (hold_time_ns > config->min_hold_time_ns) {
|
|
dev_err(dev, "data hold time %dns is over %dns\n",
|
|
hold_time_ns, config->min_hold_time_ns);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rzv2m_i2c_init(struct rzv2m_i2c_priv *priv)
|
|
{
|
|
u32 i2c_ctl0;
|
|
u32 i2c_ctl1;
|
|
|
|
/* i2c disable */
|
|
writel(0, priv->base + IICB0CTL0);
|
|
|
|
/* IICB0CTL1 setting */
|
|
i2c_ctl1 = IICB0SLSE;
|
|
if (priv->bus_mode == RZV2M_I2C_400K)
|
|
i2c_ctl1 |= IICB0MDSC;
|
|
writel(i2c_ctl1, priv->base + IICB0CTL1);
|
|
|
|
/* IICB0WL IICB0WH setting */
|
|
writel(priv->iicb0wl, priv->base + IICB0WL);
|
|
writel(priv->iicb0wh, priv->base + IICB0WH);
|
|
|
|
/* i2c enable after setting */
|
|
i2c_ctl0 = IICB0SLWT | IICB0SLAC | IICB0IICE;
|
|
writel(i2c_ctl0, priv->base + IICB0CTL0);
|
|
}
|
|
|
|
static int rzv2m_i2c_write_with_ack(struct rzv2m_i2c_priv *priv, u32 data)
|
|
{
|
|
unsigned long time_left;
|
|
|
|
reinit_completion(&priv->msg_tia_done);
|
|
|
|
writel(data, priv->base + IICB0DAT);
|
|
|
|
time_left = wait_for_completion_timeout(&priv->msg_tia_done,
|
|
priv->adap.timeout);
|
|
if (!time_left)
|
|
return -ETIMEDOUT;
|
|
|
|
/* Confirm ACK */
|
|
if ((readl(priv->base + IICB0STR0) & IICB0SSAC) != IICB0SSAC)
|
|
return -ENXIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rzv2m_i2c_read_with_ack(struct rzv2m_i2c_priv *priv, u8 *data,
|
|
bool last)
|
|
{
|
|
unsigned long time_left;
|
|
u32 data_tmp;
|
|
|
|
reinit_completion(&priv->msg_tia_done);
|
|
|
|
/* Interrupt request timing : 8th clock */
|
|
bit_clrl(priv->base + IICB0CTL0, IICB0SLWT);
|
|
|
|
/* Exit the wait state */
|
|
writel(IICB0WRET, priv->base + IICB0TRG);
|
|
|
|
/* Wait for transaction */
|
|
time_left = wait_for_completion_timeout(&priv->msg_tia_done,
|
|
priv->adap.timeout);
|
|
if (!time_left)
|
|
return -ETIMEDOUT;
|
|
|
|
if (last) {
|
|
/* Disable ACK */
|
|
bit_clrl(priv->base + IICB0CTL0, IICB0SLAC);
|
|
|
|
/* Read data*/
|
|
data_tmp = readl(priv->base + IICB0DAT);
|
|
|
|
/* Interrupt request timing : 9th clock */
|
|
bit_setl(priv->base + IICB0CTL0, IICB0SLWT);
|
|
|
|
/* Exit the wait state */
|
|
writel(IICB0WRET, priv->base + IICB0TRG);
|
|
|
|
/* Wait for transaction */
|
|
time_left = wait_for_completion_timeout(&priv->msg_tia_done,
|
|
priv->adap.timeout);
|
|
if (!time_left)
|
|
return -ETIMEDOUT;
|
|
|
|
/* Enable ACK */
|
|
bit_setl(priv->base + IICB0CTL0, IICB0SLAC);
|
|
} else {
|
|
/* Read data */
|
|
data_tmp = readl(priv->base + IICB0DAT);
|
|
}
|
|
|
|
*data = data_tmp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rzv2m_i2c_send(struct rzv2m_i2c_priv *priv, struct i2c_msg *msg,
|
|
unsigned int *count)
|
|
{
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < msg->len; i++) {
|
|
ret = rzv2m_i2c_write_with_ack(priv, msg->buf[i]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
*count = i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rzv2m_i2c_receive(struct rzv2m_i2c_priv *priv, struct i2c_msg *msg,
|
|
unsigned int *count)
|
|
{
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < msg->len; i++) {
|
|
ret = rzv2m_i2c_read_with_ack(priv, &msg->buf[i],
|
|
(msg->len - 1) == i);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
*count = i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rzv2m_i2c_send_address(struct rzv2m_i2c_priv *priv,
|
|
struct i2c_msg *msg)
|
|
{
|
|
u32 addr;
|
|
int ret;
|
|
|
|
if (msg->flags & I2C_M_TEN) {
|
|
/*
|
|
* 10-bit address
|
|
* addr_1: 5'b11110 | addr[9:8] | (R/nW)
|
|
* addr_2: addr[7:0]
|
|
*/
|
|
addr = 0xf0 | ((msg->addr & GENMASK(9, 8)) >> 7);
|
|
addr |= !!(msg->flags & I2C_M_RD);
|
|
/* Send 1st address(extend code) */
|
|
ret = rzv2m_i2c_write_with_ack(priv, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Send 2nd address */
|
|
ret = rzv2m_i2c_write_with_ack(priv, msg->addr & 0xff);
|
|
} else {
|
|
/* 7-bit address */
|
|
addr = i2c_8bit_addr_from_msg(msg);
|
|
ret = rzv2m_i2c_write_with_ack(priv, addr);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rzv2m_i2c_stop_condition(struct rzv2m_i2c_priv *priv)
|
|
{
|
|
u32 value;
|
|
|
|
/* Send stop condition */
|
|
writel(IICB0SPT, priv->base + IICB0TRG);
|
|
return readl_poll_timeout(priv->base + IICB0STR0,
|
|
value, value & IICB0SSSP,
|
|
100, jiffies_to_usecs(priv->adap.timeout));
|
|
}
|
|
|
|
static int rzv2m_i2c_master_xfer_msg(struct rzv2m_i2c_priv *priv,
|
|
struct i2c_msg *msg, int stop)
|
|
{
|
|
unsigned int count = 0;
|
|
int ret, read = !!(msg->flags & I2C_M_RD);
|
|
|
|
/* Send start condition */
|
|
writel(IICB0STT, priv->base + IICB0TRG);
|
|
|
|
ret = rzv2m_i2c_send_address(priv, msg);
|
|
if (!ret) {
|
|
if (read)
|
|
ret = rzv2m_i2c_receive(priv, msg, &count);
|
|
else
|
|
ret = rzv2m_i2c_send(priv, msg, &count);
|
|
|
|
if (!ret && stop)
|
|
ret = rzv2m_i2c_stop_condition(priv);
|
|
}
|
|
|
|
if (ret == -ENXIO)
|
|
rzv2m_i2c_stop_condition(priv);
|
|
else if (ret < 0)
|
|
rzv2m_i2c_init(priv);
|
|
else
|
|
ret = count;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rzv2m_i2c_master_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct rzv2m_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
struct device *dev = priv->adap.dev.parent;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (readl(priv->base + IICB0STR0) & IICB0SSBS) {
|
|
ret = -EAGAIN;
|
|
goto out;
|
|
}
|
|
|
|
/* I2C main transfer */
|
|
for (i = 0; i < num; i++) {
|
|
ret = rzv2m_i2c_master_xfer_msg(priv, &msgs[i], i == (num - 1));
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
ret = num;
|
|
|
|
out:
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_autosuspend(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 rzv2m_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
|
|
I2C_FUNC_10BIT_ADDR;
|
|
}
|
|
|
|
static int rzv2m_i2c_disable(struct device *dev, struct rzv2m_i2c_priv *priv)
|
|
{
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
bit_clrl(priv->base + IICB0CTL0, IICB0IICE);
|
|
pm_runtime_put(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_adapter_quirks rzv2m_i2c_quirks = {
|
|
.flags = I2C_AQ_NO_ZERO_LEN,
|
|
};
|
|
|
|
static struct i2c_algorithm rzv2m_i2c_algo = {
|
|
.master_xfer = rzv2m_i2c_master_xfer,
|
|
.functionality = rzv2m_i2c_func,
|
|
};
|
|
|
|
static int rzv2m_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct rzv2m_i2c_priv *priv;
|
|
struct reset_control *rstc;
|
|
struct i2c_adapter *adap;
|
|
struct resource *res;
|
|
int irq, ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
priv->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(priv->clk))
|
|
return dev_err_probe(dev, PTR_ERR(priv->clk), "Can't get clock\n");
|
|
|
|
rstc = devm_reset_control_get_shared(dev, NULL);
|
|
if (IS_ERR(rstc))
|
|
return dev_err_probe(dev, PTR_ERR(rstc), "Missing reset ctrl\n");
|
|
/*
|
|
* The reset also affects other HW that is not under the control
|
|
* of Linux. Therefore, all we can do is deassert the reset.
|
|
*/
|
|
reset_control_deassert(rstc);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
ret = devm_request_irq(dev, irq, rzv2m_i2c_tia_irq_handler, 0,
|
|
dev_name(dev), priv);
|
|
if (ret < 0)
|
|
return dev_err_probe(dev, ret, "Unable to request irq %d\n", irq);
|
|
|
|
adap = &priv->adap;
|
|
adap->nr = pdev->id;
|
|
adap->algo = &rzv2m_i2c_algo;
|
|
adap->quirks = &rzv2m_i2c_quirks;
|
|
adap->dev.parent = dev;
|
|
adap->owner = THIS_MODULE;
|
|
device_set_node(&adap->dev, dev_fwnode(dev));
|
|
i2c_set_adapdata(adap, priv);
|
|
strscpy(adap->name, pdev->name, sizeof(adap->name));
|
|
init_completion(&priv->msg_tia_done);
|
|
|
|
ret = rzv2m_i2c_clock_calculate(dev, priv);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
pm_runtime_enable(dev);
|
|
|
|
pm_runtime_get_sync(dev);
|
|
rzv2m_i2c_init(priv);
|
|
pm_runtime_put(dev);
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
ret = i2c_add_numbered_adapter(adap);
|
|
if (ret < 0) {
|
|
rzv2m_i2c_disable(dev, priv);
|
|
pm_runtime_disable(dev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void rzv2m_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct rzv2m_i2c_priv *priv = platform_get_drvdata(pdev);
|
|
struct device *dev = priv->adap.dev.parent;
|
|
|
|
i2c_del_adapter(&priv->adap);
|
|
rzv2m_i2c_disable(dev, priv);
|
|
pm_runtime_disable(dev);
|
|
}
|
|
|
|
static int rzv2m_i2c_suspend(struct device *dev)
|
|
{
|
|
struct rzv2m_i2c_priv *priv = dev_get_drvdata(dev);
|
|
|
|
return rzv2m_i2c_disable(dev, priv);
|
|
}
|
|
|
|
static int rzv2m_i2c_resume(struct device *dev)
|
|
{
|
|
struct rzv2m_i2c_priv *priv = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = rzv2m_i2c_clock_calculate(dev, priv);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = pm_runtime_resume_and_get(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
rzv2m_i2c_init(priv);
|
|
pm_runtime_put(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id rzv2m_i2c_ids[] = {
|
|
{ .compatible = "renesas,rzv2m-i2c" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rzv2m_i2c_ids);
|
|
|
|
static const struct dev_pm_ops rzv2m_i2c_pm_ops = {
|
|
SYSTEM_SLEEP_PM_OPS(rzv2m_i2c_suspend, rzv2m_i2c_resume)
|
|
};
|
|
|
|
static struct platform_driver rzv2m_i2c_driver = {
|
|
.driver = {
|
|
.name = "rzv2m-i2c",
|
|
.of_match_table = rzv2m_i2c_ids,
|
|
.pm = pm_sleep_ptr(&rzv2m_i2c_pm_ops),
|
|
},
|
|
.probe = rzv2m_i2c_probe,
|
|
.remove_new = rzv2m_i2c_remove,
|
|
};
|
|
module_platform_driver(rzv2m_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("RZ/V2M I2C bus driver");
|
|
MODULE_AUTHOR("Renesas Electronics Corporation");
|
|
MODULE_LICENSE("GPL");
|