linux/drivers/i2c/busses/i2c-opal.c
Uwe Kleine-König e190a0c389 i2c: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asnaa@nvidia.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Chris Pringle <chris.pringle@phabrix.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Tali Perry <tali.perry@nuvoton.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-05 09:47:37 +02:00

277 lines
6.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* IBM OPAL I2C driver
* Copyright (C) 2014 IBM
*/
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <asm/firmware.h>
#include <asm/opal.h>
static int i2c_opal_translate_error(int rc)
{
switch (rc) {
case OPAL_NO_MEM:
return -ENOMEM;
case OPAL_PARAMETER:
return -EINVAL;
case OPAL_I2C_ARBT_LOST:
return -EAGAIN;
case OPAL_I2C_TIMEOUT:
return -ETIMEDOUT;
case OPAL_I2C_NACK_RCVD:
return -ENXIO;
case OPAL_I2C_STOP_ERR:
return -EBUSY;
default:
return -EIO;
}
}
static int i2c_opal_send_request(u32 bus_id, struct opal_i2c_request *req)
{
struct opal_msg msg;
int token, rc;
token = opal_async_get_token_interruptible();
if (token < 0) {
if (token != -ERESTARTSYS)
pr_err("Failed to get the async token\n");
return token;
}
rc = opal_i2c_request(token, bus_id, req);
if (rc != OPAL_ASYNC_COMPLETION) {
rc = i2c_opal_translate_error(rc);
goto exit;
}
rc = opal_async_wait_response(token, &msg);
if (rc)
goto exit;
rc = opal_get_async_rc(msg);
if (rc != OPAL_SUCCESS) {
rc = i2c_opal_translate_error(rc);
goto exit;
}
exit:
opal_async_release_token(token);
return rc;
}
static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int num)
{
unsigned long opal_id = (unsigned long)adap->algo_data;
struct opal_i2c_request req;
int rc, i;
/* We only support fairly simple combinations here of one
* or two messages
*/
memset(&req, 0, sizeof(req));
switch(num) {
case 1:
req.type = (msgs[0].flags & I2C_M_RD) ?
OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE;
req.addr = cpu_to_be16(msgs[0].addr);
req.size = cpu_to_be32(msgs[0].len);
req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf));
break;
case 2:
req.type = (msgs[1].flags & I2C_M_RD) ?
OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
req.addr = cpu_to_be16(msgs[0].addr);
req.subaddr_sz = msgs[0].len;
for (i = 0; i < msgs[0].len; i++)
req.subaddr = (req.subaddr << 8) | msgs[0].buf[i];
req.subaddr = cpu_to_be32(req.subaddr);
req.size = cpu_to_be32(msgs[1].len);
req.buffer_ra = cpu_to_be64(__pa(msgs[1].buf));
break;
}
rc = i2c_opal_send_request(opal_id, &req);
if (rc)
return rc;
return num;
}
static int i2c_opal_smbus_xfer(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data *data)
{
unsigned long opal_id = (unsigned long)adap->algo_data;
struct opal_i2c_request req;
u8 local[2];
int rc;
memset(&req, 0, sizeof(req));
req.addr = cpu_to_be16(addr);
switch (size) {
case I2C_SMBUS_BYTE:
req.buffer_ra = cpu_to_be64(__pa(&data->byte));
req.size = cpu_to_be32(1);
fallthrough;
case I2C_SMBUS_QUICK:
req.type = (read_write == I2C_SMBUS_READ) ?
OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE;
break;
case I2C_SMBUS_BYTE_DATA:
req.buffer_ra = cpu_to_be64(__pa(&data->byte));
req.size = cpu_to_be32(1);
req.subaddr = cpu_to_be32(command);
req.subaddr_sz = 1;
req.type = (read_write == I2C_SMBUS_READ) ?
OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
break;
case I2C_SMBUS_WORD_DATA:
if (!read_write) {
local[0] = data->word & 0xff;
local[1] = (data->word >> 8) & 0xff;
}
req.buffer_ra = cpu_to_be64(__pa(local));
req.size = cpu_to_be32(2);
req.subaddr = cpu_to_be32(command);
req.subaddr_sz = 1;
req.type = (read_write == I2C_SMBUS_READ) ?
OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
req.buffer_ra = cpu_to_be64(__pa(&data->block[1]));
req.size = cpu_to_be32(data->block[0]);
req.subaddr = cpu_to_be32(command);
req.subaddr_sz = 1;
req.type = (read_write == I2C_SMBUS_READ) ?
OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
break;
default:
return -EINVAL;
}
rc = i2c_opal_send_request(opal_id, &req);
if (!rc && read_write && size == I2C_SMBUS_WORD_DATA) {
data->word = ((u16)local[1]) << 8;
data->word |= local[0];
}
return rc;
}
static u32 i2c_opal_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK;
}
static const struct i2c_algorithm i2c_opal_algo = {
.master_xfer = i2c_opal_master_xfer,
.smbus_xfer = i2c_opal_smbus_xfer,
.functionality = i2c_opal_func,
};
/*
* For two messages, we basically support simple smbus transactions of a
* write-then-anything.
*/
static const struct i2c_adapter_quirks i2c_opal_quirks = {
.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
.max_comb_1st_msg_len = 4,
};
static int i2c_opal_probe(struct platform_device *pdev)
{
struct i2c_adapter *adapter;
const char *pname;
u32 opal_id;
int rc;
if (!pdev->dev.of_node)
return -ENODEV;
rc = of_property_read_u32(pdev->dev.of_node, "ibm,opal-id", &opal_id);
if (rc) {
dev_err(&pdev->dev, "Missing ibm,opal-id property !\n");
return -EIO;
}
adapter = devm_kzalloc(&pdev->dev, sizeof(*adapter), GFP_KERNEL);
if (!adapter)
return -ENOMEM;
adapter->algo = &i2c_opal_algo;
adapter->algo_data = (void *)(unsigned long)opal_id;
adapter->quirks = &i2c_opal_quirks;
adapter->dev.parent = &pdev->dev;
adapter->dev.of_node = of_node_get(pdev->dev.of_node);
pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL);
if (pname)
strscpy(adapter->name, pname, sizeof(adapter->name));
else
strscpy(adapter->name, "opal", sizeof(adapter->name));
platform_set_drvdata(pdev, adapter);
rc = i2c_add_adapter(adapter);
if (rc)
dev_err(&pdev->dev, "Failed to register the i2c adapter\n");
return rc;
}
static void i2c_opal_remove(struct platform_device *pdev)
{
struct i2c_adapter *adapter = platform_get_drvdata(pdev);
i2c_del_adapter(adapter);
}
static const struct of_device_id i2c_opal_of_match[] = {
{
.compatible = "ibm,opal-i2c",
},
{ }
};
MODULE_DEVICE_TABLE(of, i2c_opal_of_match);
static struct platform_driver i2c_opal_driver = {
.probe = i2c_opal_probe,
.remove_new = i2c_opal_remove,
.driver = {
.name = "i2c-opal",
.of_match_table = i2c_opal_of_match,
},
};
static int __init i2c_opal_init(void)
{
if (!firmware_has_feature(FW_FEATURE_OPAL))
return -ENODEV;
return platform_driver_register(&i2c_opal_driver);
}
module_init(i2c_opal_init);
static void __exit i2c_opal_exit(void)
{
return platform_driver_unregister(&i2c_opal_driver);
}
module_exit(i2c_opal_exit);
MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>");
MODULE_DESCRIPTION("IBM OPAL I2C driver");
MODULE_LICENSE("GPL");