mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 05:55:02 +08:00
e6d6ca6e12
According to the vendor driver, the new chip with XID 0x54b is essentially the same as the one with XID 0x54a, but it doesn't need the firmware. So add support accordingly. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20210202044813.1304266-1-kai.heng.feng@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1370 lines
37 KiB
C
1370 lines
37 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* r8169_phy_config.c: RealTek 8169/8168/8101 ethernet driver.
|
|
*
|
|
* Copyright (c) 2002 ShuChen <shuchen@realtek.com.tw>
|
|
* Copyright (c) 2003 - 2007 Francois Romieu <romieu@fr.zoreil.com>
|
|
* Copyright (c) a lot of people too. Please respect their work.
|
|
*
|
|
* See MAINTAINERS file for support contact information.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/phy.h>
|
|
|
|
#include "r8169.h"
|
|
|
|
typedef void (*rtl_phy_cfg_fct)(struct rtl8169_private *tp,
|
|
struct phy_device *phydev);
|
|
|
|
static void r8168d_modify_extpage(struct phy_device *phydev, int extpage,
|
|
int reg, u16 mask, u16 val)
|
|
{
|
|
int oldpage = phy_select_page(phydev, 0x0007);
|
|
|
|
__phy_write(phydev, 0x1e, extpage);
|
|
__phy_modify(phydev, reg, mask, val);
|
|
|
|
phy_restore_page(phydev, oldpage, 0);
|
|
}
|
|
|
|
static void r8168d_phy_param(struct phy_device *phydev, u16 parm,
|
|
u16 mask, u16 val)
|
|
{
|
|
int oldpage = phy_select_page(phydev, 0x0005);
|
|
|
|
__phy_write(phydev, 0x05, parm);
|
|
__phy_modify(phydev, 0x06, mask, val);
|
|
|
|
phy_restore_page(phydev, oldpage, 0);
|
|
}
|
|
|
|
static void r8168g_phy_param(struct phy_device *phydev, u16 parm,
|
|
u16 mask, u16 val)
|
|
{
|
|
int oldpage = phy_select_page(phydev, 0x0a43);
|
|
|
|
__phy_write(phydev, 0x13, parm);
|
|
__phy_modify(phydev, 0x14, mask, val);
|
|
|
|
phy_restore_page(phydev, oldpage, 0);
|
|
}
|
|
|
|
struct phy_reg {
|
|
u16 reg;
|
|
u16 val;
|
|
};
|
|
|
|
static void __rtl_writephy_batch(struct phy_device *phydev,
|
|
const struct phy_reg *regs, int len)
|
|
{
|
|
phy_lock_mdio_bus(phydev);
|
|
|
|
while (len-- > 0) {
|
|
__phy_write(phydev, regs->reg, regs->val);
|
|
regs++;
|
|
}
|
|
|
|
phy_unlock_mdio_bus(phydev);
|
|
}
|
|
|
|
#define rtl_writephy_batch(p, a) __rtl_writephy_batch(p, a, ARRAY_SIZE(a))
|
|
|
|
static void rtl8168f_config_eee_phy(struct phy_device *phydev)
|
|
{
|
|
r8168d_modify_extpage(phydev, 0x0020, 0x15, 0, BIT(8));
|
|
r8168d_phy_param(phydev, 0x8b85, 0, BIT(13));
|
|
}
|
|
|
|
static void rtl8168g_config_eee_phy(struct phy_device *phydev)
|
|
{
|
|
phy_modify_paged(phydev, 0x0a43, 0x11, 0, BIT(4));
|
|
}
|
|
|
|
static void rtl8168h_config_eee_phy(struct phy_device *phydev)
|
|
{
|
|
rtl8168g_config_eee_phy(phydev);
|
|
|
|
phy_modify_paged(phydev, 0xa4a, 0x11, 0x0000, 0x0200);
|
|
phy_modify_paged(phydev, 0xa42, 0x14, 0x0000, 0x0080);
|
|
}
|
|
|
|
static void rtl8125a_config_eee_phy(struct phy_device *phydev)
|
|
{
|
|
rtl8168h_config_eee_phy(phydev);
|
|
|
|
phy_modify_paged(phydev, 0xa6d, 0x12, 0x0001, 0x0000);
|
|
phy_modify_paged(phydev, 0xa6d, 0x14, 0x0010, 0x0000);
|
|
}
|
|
|
|
static void rtl8125b_config_eee_phy(struct phy_device *phydev)
|
|
{
|
|
phy_modify_paged(phydev, 0xa6d, 0x12, 0x0001, 0x0000);
|
|
phy_modify_paged(phydev, 0xa6d, 0x14, 0x0010, 0x0000);
|
|
phy_modify_paged(phydev, 0xa42, 0x14, 0x0080, 0x0000);
|
|
phy_modify_paged(phydev, 0xa4a, 0x11, 0x0200, 0x0000);
|
|
}
|
|
|
|
static void rtl8169s_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
static const struct phy_reg phy_reg_init[] = {
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x06, 0x006e },
|
|
{ 0x08, 0x0708 },
|
|
{ 0x15, 0x4000 },
|
|
{ 0x18, 0x65c7 },
|
|
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x03, 0x00a1 },
|
|
{ 0x02, 0x0008 },
|
|
{ 0x01, 0x0120 },
|
|
{ 0x00, 0x1000 },
|
|
{ 0x04, 0x0800 },
|
|
{ 0x04, 0x0000 },
|
|
|
|
{ 0x03, 0xff41 },
|
|
{ 0x02, 0xdf60 },
|
|
{ 0x01, 0x0140 },
|
|
{ 0x00, 0x0077 },
|
|
{ 0x04, 0x7800 },
|
|
{ 0x04, 0x7000 },
|
|
|
|
{ 0x03, 0x802f },
|
|
{ 0x02, 0x4f02 },
|
|
{ 0x01, 0x0409 },
|
|
{ 0x00, 0xf0f9 },
|
|
{ 0x04, 0x9800 },
|
|
{ 0x04, 0x9000 },
|
|
|
|
{ 0x03, 0xdf01 },
|
|
{ 0x02, 0xdf20 },
|
|
{ 0x01, 0xff95 },
|
|
{ 0x00, 0xba00 },
|
|
{ 0x04, 0xa800 },
|
|
{ 0x04, 0xa000 },
|
|
|
|
{ 0x03, 0xff41 },
|
|
{ 0x02, 0xdf20 },
|
|
{ 0x01, 0x0140 },
|
|
{ 0x00, 0x00bb },
|
|
{ 0x04, 0xb800 },
|
|
{ 0x04, 0xb000 },
|
|
|
|
{ 0x03, 0xdf41 },
|
|
{ 0x02, 0xdc60 },
|
|
{ 0x01, 0x6340 },
|
|
{ 0x00, 0x007d },
|
|
{ 0x04, 0xd800 },
|
|
{ 0x04, 0xd000 },
|
|
|
|
{ 0x03, 0xdf01 },
|
|
{ 0x02, 0xdf20 },
|
|
{ 0x01, 0x100a },
|
|
{ 0x00, 0xa0ff },
|
|
{ 0x04, 0xf800 },
|
|
{ 0x04, 0xf000 },
|
|
|
|
{ 0x1f, 0x0000 },
|
|
{ 0x0b, 0x0000 },
|
|
{ 0x00, 0x9200 }
|
|
};
|
|
|
|
rtl_writephy_batch(phydev, phy_reg_init);
|
|
}
|
|
|
|
static void rtl8169sb_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
phy_write_paged(phydev, 0x0002, 0x01, 0x90d0);
|
|
}
|
|
|
|
static void rtl8169scd_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
static const struct phy_reg phy_reg_init[] = {
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x04, 0x0000 },
|
|
{ 0x03, 0x00a1 },
|
|
{ 0x02, 0x0008 },
|
|
{ 0x01, 0x0120 },
|
|
{ 0x00, 0x1000 },
|
|
{ 0x04, 0x0800 },
|
|
{ 0x04, 0x9000 },
|
|
{ 0x03, 0x802f },
|
|
{ 0x02, 0x4f02 },
|
|
{ 0x01, 0x0409 },
|
|
{ 0x00, 0xf099 },
|
|
{ 0x04, 0x9800 },
|
|
{ 0x04, 0xa000 },
|
|
{ 0x03, 0xdf01 },
|
|
{ 0x02, 0xdf20 },
|
|
{ 0x01, 0xff95 },
|
|
{ 0x00, 0xba00 },
|
|
{ 0x04, 0xa800 },
|
|
{ 0x04, 0xf000 },
|
|
{ 0x03, 0xdf01 },
|
|
{ 0x02, 0xdf20 },
|
|
{ 0x01, 0x101a },
|
|
{ 0x00, 0xa0ff },
|
|
{ 0x04, 0xf800 },
|
|
{ 0x04, 0x0000 },
|
|
{ 0x1f, 0x0000 },
|
|
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x10, 0xf41b },
|
|
{ 0x14, 0xfb54 },
|
|
{ 0x18, 0xf5c7 },
|
|
{ 0x1f, 0x0000 },
|
|
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x17, 0x0cc0 },
|
|
{ 0x1f, 0x0000 }
|
|
};
|
|
|
|
rtl_writephy_batch(phydev, phy_reg_init);
|
|
}
|
|
|
|
static void rtl8169sce_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
static const struct phy_reg phy_reg_init[] = {
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x04, 0x0000 },
|
|
{ 0x03, 0x00a1 },
|
|
{ 0x02, 0x0008 },
|
|
{ 0x01, 0x0120 },
|
|
{ 0x00, 0x1000 },
|
|
{ 0x04, 0x0800 },
|
|
{ 0x04, 0x9000 },
|
|
{ 0x03, 0x802f },
|
|
{ 0x02, 0x4f02 },
|
|
{ 0x01, 0x0409 },
|
|
{ 0x00, 0xf099 },
|
|
{ 0x04, 0x9800 },
|
|
{ 0x04, 0xa000 },
|
|
{ 0x03, 0xdf01 },
|
|
{ 0x02, 0xdf20 },
|
|
{ 0x01, 0xff95 },
|
|
{ 0x00, 0xba00 },
|
|
{ 0x04, 0xa800 },
|
|
{ 0x04, 0xf000 },
|
|
{ 0x03, 0xdf01 },
|
|
{ 0x02, 0xdf20 },
|
|
{ 0x01, 0x101a },
|
|
{ 0x00, 0xa0ff },
|
|
{ 0x04, 0xf800 },
|
|
{ 0x04, 0x0000 },
|
|
{ 0x1f, 0x0000 },
|
|
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x0b, 0x8480 },
|
|
{ 0x1f, 0x0000 },
|
|
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x18, 0x67c7 },
|
|
{ 0x04, 0x2000 },
|
|
{ 0x03, 0x002f },
|
|
{ 0x02, 0x4360 },
|
|
{ 0x01, 0x0109 },
|
|
{ 0x00, 0x3022 },
|
|
{ 0x04, 0x2800 },
|
|
{ 0x1f, 0x0000 },
|
|
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x17, 0x0cc0 },
|
|
{ 0x1f, 0x0000 }
|
|
};
|
|
|
|
rtl_writephy_batch(phydev, phy_reg_init);
|
|
}
|
|
|
|
static void rtl8168bb_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
phy_write(phydev, 0x1f, 0x0001);
|
|
phy_set_bits(phydev, 0x16, BIT(0));
|
|
phy_write(phydev, 0x10, 0xf41b);
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
}
|
|
|
|
static void rtl8168bef_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
phy_write_paged(phydev, 0x0001, 0x10, 0xf41b);
|
|
}
|
|
|
|
static void rtl8168cp_1_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
phy_write(phydev, 0x1d, 0x0f00);
|
|
phy_write_paged(phydev, 0x0002, 0x0c, 0x1ec8);
|
|
}
|
|
|
|
static void rtl8168cp_2_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
phy_set_bits(phydev, 0x14, BIT(5));
|
|
phy_set_bits(phydev, 0x0d, BIT(5));
|
|
phy_write_paged(phydev, 0x0001, 0x1d, 0x3d98);
|
|
}
|
|
|
|
static void rtl8168c_1_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
static const struct phy_reg phy_reg_init[] = {
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x12, 0x2300 },
|
|
{ 0x1f, 0x0002 },
|
|
{ 0x00, 0x88d4 },
|
|
{ 0x01, 0x82b1 },
|
|
{ 0x03, 0x7002 },
|
|
{ 0x08, 0x9e30 },
|
|
{ 0x09, 0x01f0 },
|
|
{ 0x0a, 0x5500 },
|
|
{ 0x0c, 0x00c8 },
|
|
{ 0x1f, 0x0003 },
|
|
{ 0x12, 0xc096 },
|
|
{ 0x16, 0x000a },
|
|
{ 0x1f, 0x0000 },
|
|
{ 0x1f, 0x0000 },
|
|
{ 0x09, 0x2000 },
|
|
{ 0x09, 0x0000 }
|
|
};
|
|
|
|
rtl_writephy_batch(phydev, phy_reg_init);
|
|
|
|
phy_set_bits(phydev, 0x14, BIT(5));
|
|
phy_set_bits(phydev, 0x0d, BIT(5));
|
|
}
|
|
|
|
static void rtl8168c_2_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
static const struct phy_reg phy_reg_init[] = {
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x12, 0x2300 },
|
|
{ 0x03, 0x802f },
|
|
{ 0x02, 0x4f02 },
|
|
{ 0x01, 0x0409 },
|
|
{ 0x00, 0xf099 },
|
|
{ 0x04, 0x9800 },
|
|
{ 0x04, 0x9000 },
|
|
{ 0x1d, 0x3d98 },
|
|
{ 0x1f, 0x0002 },
|
|
{ 0x0c, 0x7eb8 },
|
|
{ 0x06, 0x0761 },
|
|
{ 0x1f, 0x0003 },
|
|
{ 0x16, 0x0f0a },
|
|
{ 0x1f, 0x0000 }
|
|
};
|
|
|
|
rtl_writephy_batch(phydev, phy_reg_init);
|
|
|
|
phy_set_bits(phydev, 0x16, BIT(0));
|
|
phy_set_bits(phydev, 0x14, BIT(5));
|
|
phy_set_bits(phydev, 0x0d, BIT(5));
|
|
}
|
|
|
|
static void rtl8168c_3_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
static const struct phy_reg phy_reg_init[] = {
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x12, 0x2300 },
|
|
{ 0x1d, 0x3d98 },
|
|
{ 0x1f, 0x0002 },
|
|
{ 0x0c, 0x7eb8 },
|
|
{ 0x06, 0x5461 },
|
|
{ 0x1f, 0x0003 },
|
|
{ 0x16, 0x0f0a },
|
|
{ 0x1f, 0x0000 }
|
|
};
|
|
|
|
rtl_writephy_batch(phydev, phy_reg_init);
|
|
|
|
phy_set_bits(phydev, 0x16, BIT(0));
|
|
phy_set_bits(phydev, 0x14, BIT(5));
|
|
phy_set_bits(phydev, 0x0d, BIT(5));
|
|
}
|
|
|
|
static const struct phy_reg rtl8168d_1_phy_reg_init_0[] = {
|
|
/* Channel Estimation */
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x06, 0x4064 },
|
|
{ 0x07, 0x2863 },
|
|
{ 0x08, 0x059c },
|
|
{ 0x09, 0x26b4 },
|
|
{ 0x0a, 0x6a19 },
|
|
{ 0x0b, 0xdcc8 },
|
|
{ 0x10, 0xf06d },
|
|
{ 0x14, 0x7f68 },
|
|
{ 0x18, 0x7fd9 },
|
|
{ 0x1c, 0xf0ff },
|
|
{ 0x1d, 0x3d9c },
|
|
{ 0x1f, 0x0003 },
|
|
{ 0x12, 0xf49f },
|
|
{ 0x13, 0x070b },
|
|
{ 0x1a, 0x05ad },
|
|
{ 0x14, 0x94c0 },
|
|
|
|
/*
|
|
* Tx Error Issue
|
|
* Enhance line driver power
|
|
*/
|
|
{ 0x1f, 0x0002 },
|
|
{ 0x06, 0x5561 },
|
|
{ 0x1f, 0x0005 },
|
|
{ 0x05, 0x8332 },
|
|
{ 0x06, 0x5561 },
|
|
|
|
/*
|
|
* Can not link to 1Gbps with bad cable
|
|
* Decrease SNR threshold form 21.07dB to 19.04dB
|
|
*/
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x17, 0x0cc0 },
|
|
|
|
{ 0x1f, 0x0000 },
|
|
{ 0x0d, 0xf880 }
|
|
};
|
|
|
|
static const struct phy_reg rtl8168d_1_phy_reg_init_1[] = {
|
|
{ 0x1f, 0x0002 },
|
|
{ 0x05, 0x669a },
|
|
{ 0x1f, 0x0005 },
|
|
{ 0x05, 0x8330 },
|
|
{ 0x06, 0x669a },
|
|
{ 0x1f, 0x0002 }
|
|
};
|
|
|
|
static void rtl8168d_apply_firmware_cond(struct rtl8169_private *tp,
|
|
struct phy_device *phydev,
|
|
u16 val)
|
|
{
|
|
u16 reg_val;
|
|
|
|
phy_write(phydev, 0x1f, 0x0005);
|
|
phy_write(phydev, 0x05, 0x001b);
|
|
reg_val = phy_read(phydev, 0x06);
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
|
|
if (reg_val != val)
|
|
phydev_warn(phydev, "chipset not ready for firmware\n");
|
|
else
|
|
r8169_apply_firmware(tp);
|
|
}
|
|
|
|
static void rtl8168d_1_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
rtl_writephy_batch(phydev, rtl8168d_1_phy_reg_init_0);
|
|
|
|
/*
|
|
* Rx Error Issue
|
|
* Fine Tune Switching regulator parameter
|
|
*/
|
|
phy_write(phydev, 0x1f, 0x0002);
|
|
phy_modify(phydev, 0x0b, 0x00ef, 0x0010);
|
|
phy_modify(phydev, 0x0c, 0x5d00, 0xa200);
|
|
|
|
if (rtl8168d_efuse_read(tp, 0x01) == 0xb1) {
|
|
int val;
|
|
|
|
rtl_writephy_batch(phydev, rtl8168d_1_phy_reg_init_1);
|
|
|
|
val = phy_read(phydev, 0x0d);
|
|
|
|
if ((val & 0x00ff) != 0x006c) {
|
|
static const u32 set[] = {
|
|
0x0065, 0x0066, 0x0067, 0x0068,
|
|
0x0069, 0x006a, 0x006b, 0x006c
|
|
};
|
|
int i;
|
|
|
|
phy_write(phydev, 0x1f, 0x0002);
|
|
|
|
val &= 0xff00;
|
|
for (i = 0; i < ARRAY_SIZE(set); i++)
|
|
phy_write(phydev, 0x0d, val | set[i]);
|
|
}
|
|
} else {
|
|
phy_write_paged(phydev, 0x0002, 0x05, 0x6662);
|
|
r8168d_phy_param(phydev, 0x8330, 0xffff, 0x6662);
|
|
}
|
|
|
|
/* RSET couple improve */
|
|
phy_write(phydev, 0x1f, 0x0002);
|
|
phy_set_bits(phydev, 0x0d, 0x0300);
|
|
phy_set_bits(phydev, 0x0f, 0x0010);
|
|
|
|
/* Fine tune PLL performance */
|
|
phy_write(phydev, 0x1f, 0x0002);
|
|
phy_modify(phydev, 0x02, 0x0600, 0x0100);
|
|
phy_clear_bits(phydev, 0x03, 0xe000);
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
|
|
rtl8168d_apply_firmware_cond(tp, phydev, 0xbf00);
|
|
}
|
|
|
|
static void rtl8168d_2_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
rtl_writephy_batch(phydev, rtl8168d_1_phy_reg_init_0);
|
|
|
|
if (rtl8168d_efuse_read(tp, 0x01) == 0xb1) {
|
|
int val;
|
|
|
|
rtl_writephy_batch(phydev, rtl8168d_1_phy_reg_init_1);
|
|
|
|
val = phy_read(phydev, 0x0d);
|
|
if ((val & 0x00ff) != 0x006c) {
|
|
static const u32 set[] = {
|
|
0x0065, 0x0066, 0x0067, 0x0068,
|
|
0x0069, 0x006a, 0x006b, 0x006c
|
|
};
|
|
int i;
|
|
|
|
phy_write(phydev, 0x1f, 0x0002);
|
|
|
|
val &= 0xff00;
|
|
for (i = 0; i < ARRAY_SIZE(set); i++)
|
|
phy_write(phydev, 0x0d, val | set[i]);
|
|
}
|
|
} else {
|
|
phy_write_paged(phydev, 0x0002, 0x05, 0x2642);
|
|
r8168d_phy_param(phydev, 0x8330, 0xffff, 0x2642);
|
|
}
|
|
|
|
/* Fine tune PLL performance */
|
|
phy_write(phydev, 0x1f, 0x0002);
|
|
phy_modify(phydev, 0x02, 0x0600, 0x0100);
|
|
phy_clear_bits(phydev, 0x03, 0xe000);
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
|
|
/* Switching regulator Slew rate */
|
|
phy_modify_paged(phydev, 0x0002, 0x0f, 0x0000, 0x0017);
|
|
|
|
rtl8168d_apply_firmware_cond(tp, phydev, 0xb300);
|
|
}
|
|
|
|
static void rtl8168d_3_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
static const struct phy_reg phy_reg_init[] = {
|
|
{ 0x1f, 0x0002 },
|
|
{ 0x10, 0x0008 },
|
|
{ 0x0d, 0x006c },
|
|
|
|
{ 0x1f, 0x0000 },
|
|
{ 0x0d, 0xf880 },
|
|
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x17, 0x0cc0 },
|
|
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x0b, 0xa4d8 },
|
|
{ 0x09, 0x281c },
|
|
{ 0x07, 0x2883 },
|
|
{ 0x0a, 0x6b35 },
|
|
{ 0x1d, 0x3da4 },
|
|
{ 0x1c, 0xeffd },
|
|
{ 0x14, 0x7f52 },
|
|
{ 0x18, 0x7fc6 },
|
|
{ 0x08, 0x0601 },
|
|
{ 0x06, 0x4063 },
|
|
{ 0x10, 0xf074 },
|
|
{ 0x1f, 0x0003 },
|
|
{ 0x13, 0x0789 },
|
|
{ 0x12, 0xf4bd },
|
|
{ 0x1a, 0x04fd },
|
|
{ 0x14, 0x84b0 },
|
|
{ 0x1f, 0x0000 },
|
|
{ 0x00, 0x9200 },
|
|
|
|
{ 0x1f, 0x0005 },
|
|
{ 0x01, 0x0340 },
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x04, 0x4000 },
|
|
{ 0x03, 0x1d21 },
|
|
{ 0x02, 0x0c32 },
|
|
{ 0x01, 0x0200 },
|
|
{ 0x00, 0x5554 },
|
|
{ 0x04, 0x4800 },
|
|
{ 0x04, 0x4000 },
|
|
{ 0x04, 0xf000 },
|
|
{ 0x03, 0xdf01 },
|
|
{ 0x02, 0xdf20 },
|
|
{ 0x01, 0x101a },
|
|
{ 0x00, 0xa0ff },
|
|
{ 0x04, 0xf800 },
|
|
{ 0x04, 0xf000 },
|
|
{ 0x1f, 0x0000 },
|
|
};
|
|
|
|
rtl_writephy_batch(phydev, phy_reg_init);
|
|
r8168d_modify_extpage(phydev, 0x0023, 0x16, 0xffff, 0x0000);
|
|
}
|
|
|
|
static void rtl8168d_4_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
phy_write_paged(phydev, 0x0001, 0x17, 0x0cc0);
|
|
r8168d_modify_extpage(phydev, 0x002d, 0x18, 0xffff, 0x0040);
|
|
phy_set_bits(phydev, 0x0d, BIT(5));
|
|
}
|
|
|
|
static void rtl8168e_1_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
static const struct phy_reg phy_reg_init[] = {
|
|
/* Channel estimation fine tune */
|
|
{ 0x1f, 0x0001 },
|
|
{ 0x0b, 0x6c20 },
|
|
{ 0x07, 0x2872 },
|
|
{ 0x1c, 0xefff },
|
|
{ 0x1f, 0x0003 },
|
|
{ 0x14, 0x6420 },
|
|
{ 0x1f, 0x0000 },
|
|
};
|
|
|
|
r8169_apply_firmware(tp);
|
|
|
|
/* Enable Delay cap */
|
|
r8168d_phy_param(phydev, 0x8b80, 0xffff, 0xc896);
|
|
|
|
rtl_writephy_batch(phydev, phy_reg_init);
|
|
|
|
/* Update PFM & 10M TX idle timer */
|
|
r8168d_modify_extpage(phydev, 0x002f, 0x15, 0xffff, 0x1919);
|
|
|
|
r8168d_modify_extpage(phydev, 0x00ac, 0x18, 0xffff, 0x0006);
|
|
|
|
/* DCO enable for 10M IDLE Power */
|
|
r8168d_modify_extpage(phydev, 0x0023, 0x17, 0x0000, 0x0006);
|
|
|
|
/* For impedance matching */
|
|
phy_modify_paged(phydev, 0x0002, 0x08, 0x7f00, 0x8000);
|
|
|
|
/* PHY auto speed down */
|
|
r8168d_modify_extpage(phydev, 0x002d, 0x18, 0x0000, 0x0050);
|
|
phy_set_bits(phydev, 0x14, BIT(15));
|
|
|
|
r8168d_phy_param(phydev, 0x8b86, 0x0000, 0x0001);
|
|
r8168d_phy_param(phydev, 0x8b85, 0x2000, 0x0000);
|
|
|
|
r8168d_modify_extpage(phydev, 0x0020, 0x15, 0x1100, 0x0000);
|
|
phy_write_paged(phydev, 0x0006, 0x00, 0x5a00);
|
|
|
|
phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0000);
|
|
}
|
|
|
|
static void rtl8168e_2_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
r8169_apply_firmware(tp);
|
|
|
|
/* Enable Delay cap */
|
|
r8168d_modify_extpage(phydev, 0x00ac, 0x18, 0xffff, 0x0006);
|
|
|
|
/* Channel estimation fine tune */
|
|
phy_write_paged(phydev, 0x0003, 0x09, 0xa20f);
|
|
|
|
/* Green Setting */
|
|
r8168d_phy_param(phydev, 0x8b5b, 0xffff, 0x9222);
|
|
r8168d_phy_param(phydev, 0x8b6d, 0xffff, 0x8000);
|
|
r8168d_phy_param(phydev, 0x8b76, 0xffff, 0x8000);
|
|
|
|
/* For 4-corner performance improve */
|
|
phy_write(phydev, 0x1f, 0x0005);
|
|
phy_write(phydev, 0x05, 0x8b80);
|
|
phy_set_bits(phydev, 0x17, 0x0006);
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
|
|
/* PHY auto speed down */
|
|
r8168d_modify_extpage(phydev, 0x002d, 0x18, 0x0000, 0x0010);
|
|
phy_set_bits(phydev, 0x14, BIT(15));
|
|
|
|
/* improve 10M EEE waveform */
|
|
r8168d_phy_param(phydev, 0x8b86, 0x0000, 0x0001);
|
|
|
|
/* Improve 2-pair detection performance */
|
|
r8168d_phy_param(phydev, 0x8b85, 0x0000, 0x4000);
|
|
|
|
rtl8168f_config_eee_phy(phydev);
|
|
|
|
/* Green feature */
|
|
phy_write(phydev, 0x1f, 0x0003);
|
|
phy_set_bits(phydev, 0x19, BIT(0));
|
|
phy_set_bits(phydev, 0x10, BIT(10));
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
phy_modify_paged(phydev, 0x0005, 0x01, 0, BIT(8));
|
|
}
|
|
|
|
static void rtl8168f_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
/* For 4-corner performance improve */
|
|
r8168d_phy_param(phydev, 0x8b80, 0x0000, 0x0006);
|
|
|
|
/* PHY auto speed down */
|
|
r8168d_modify_extpage(phydev, 0x002d, 0x18, 0x0000, 0x0010);
|
|
phy_set_bits(phydev, 0x14, BIT(15));
|
|
|
|
/* Improve 10M EEE waveform */
|
|
r8168d_phy_param(phydev, 0x8b86, 0x0000, 0x0001);
|
|
|
|
rtl8168f_config_eee_phy(phydev);
|
|
}
|
|
|
|
static void rtl8168f_1_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
r8169_apply_firmware(tp);
|
|
|
|
/* Channel estimation fine tune */
|
|
phy_write_paged(phydev, 0x0003, 0x09, 0xa20f);
|
|
|
|
/* Modify green table for giga & fnet */
|
|
r8168d_phy_param(phydev, 0x8b55, 0xffff, 0x0000);
|
|
r8168d_phy_param(phydev, 0x8b5e, 0xffff, 0x0000);
|
|
r8168d_phy_param(phydev, 0x8b67, 0xffff, 0x0000);
|
|
r8168d_phy_param(phydev, 0x8b70, 0xffff, 0x0000);
|
|
r8168d_modify_extpage(phydev, 0x0078, 0x17, 0xffff, 0x0000);
|
|
r8168d_modify_extpage(phydev, 0x0078, 0x19, 0xffff, 0x00fb);
|
|
|
|
/* Modify green table for 10M */
|
|
r8168d_phy_param(phydev, 0x8b79, 0xffff, 0xaa00);
|
|
|
|
/* Disable hiimpedance detection (RTCT) */
|
|
phy_write_paged(phydev, 0x0003, 0x01, 0x328a);
|
|
|
|
rtl8168f_hw_phy_config(tp, phydev);
|
|
|
|
/* Improve 2-pair detection performance */
|
|
r8168d_phy_param(phydev, 0x8b85, 0x0000, 0x4000);
|
|
}
|
|
|
|
static void rtl8168f_2_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
r8169_apply_firmware(tp);
|
|
|
|
rtl8168f_hw_phy_config(tp, phydev);
|
|
}
|
|
|
|
static void rtl8411_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
r8169_apply_firmware(tp);
|
|
|
|
rtl8168f_hw_phy_config(tp, phydev);
|
|
|
|
/* Improve 2-pair detection performance */
|
|
r8168d_phy_param(phydev, 0x8b85, 0x0000, 0x4000);
|
|
|
|
/* Channel estimation fine tune */
|
|
phy_write_paged(phydev, 0x0003, 0x09, 0xa20f);
|
|
|
|
/* Modify green table for giga & fnet */
|
|
r8168d_phy_param(phydev, 0x8b55, 0xffff, 0x0000);
|
|
r8168d_phy_param(phydev, 0x8b5e, 0xffff, 0x0000);
|
|
r8168d_phy_param(phydev, 0x8b67, 0xffff, 0x0000);
|
|
r8168d_phy_param(phydev, 0x8b70, 0xffff, 0x0000);
|
|
r8168d_modify_extpage(phydev, 0x0078, 0x17, 0xffff, 0x0000);
|
|
r8168d_modify_extpage(phydev, 0x0078, 0x19, 0xffff, 0x00aa);
|
|
|
|
/* Modify green table for 10M */
|
|
r8168d_phy_param(phydev, 0x8b79, 0xffff, 0xaa00);
|
|
|
|
/* Disable hiimpedance detection (RTCT) */
|
|
phy_write_paged(phydev, 0x0003, 0x01, 0x328a);
|
|
|
|
/* Modify green table for giga */
|
|
r8168d_phy_param(phydev, 0x8b54, 0x0800, 0x0000);
|
|
r8168d_phy_param(phydev, 0x8b5d, 0x0800, 0x0000);
|
|
r8168d_phy_param(phydev, 0x8a7c, 0x0100, 0x0000);
|
|
r8168d_phy_param(phydev, 0x8a7f, 0x0000, 0x0100);
|
|
r8168d_phy_param(phydev, 0x8a82, 0x0100, 0x0000);
|
|
r8168d_phy_param(phydev, 0x8a85, 0x0100, 0x0000);
|
|
r8168d_phy_param(phydev, 0x8a88, 0x0100, 0x0000);
|
|
|
|
/* uc same-seed solution */
|
|
r8168d_phy_param(phydev, 0x8b85, 0x0000, 0x8000);
|
|
|
|
/* Green feature */
|
|
phy_write(phydev, 0x1f, 0x0003);
|
|
phy_clear_bits(phydev, 0x19, BIT(0));
|
|
phy_clear_bits(phydev, 0x10, BIT(10));
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
}
|
|
|
|
static void rtl8168g_disable_aldps(struct phy_device *phydev)
|
|
{
|
|
phy_modify_paged(phydev, 0x0a43, 0x10, BIT(2), 0);
|
|
}
|
|
|
|
static void rtl8168g_enable_gphy_10m(struct phy_device *phydev)
|
|
{
|
|
phy_modify_paged(phydev, 0x0a44, 0x11, 0, BIT(11));
|
|
}
|
|
|
|
static void rtl8168g_phy_adjust_10m_aldps(struct phy_device *phydev)
|
|
{
|
|
phy_modify_paged(phydev, 0x0bcc, 0x14, BIT(8), 0);
|
|
phy_modify_paged(phydev, 0x0a44, 0x11, 0, BIT(7) | BIT(6));
|
|
r8168g_phy_param(phydev, 0x8084, 0x6000, 0x0000);
|
|
phy_modify_paged(phydev, 0x0a43, 0x10, 0x0000, 0x1003);
|
|
}
|
|
|
|
static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
r8169_apply_firmware(tp);
|
|
|
|
ret = phy_read_paged(phydev, 0x0a46, 0x10);
|
|
if (ret & BIT(8))
|
|
phy_modify_paged(phydev, 0x0bcc, 0x12, BIT(15), 0);
|
|
else
|
|
phy_modify_paged(phydev, 0x0bcc, 0x12, 0, BIT(15));
|
|
|
|
ret = phy_read_paged(phydev, 0x0a46, 0x13);
|
|
if (ret & BIT(8))
|
|
phy_modify_paged(phydev, 0x0c41, 0x15, 0, BIT(1));
|
|
else
|
|
phy_modify_paged(phydev, 0x0c41, 0x15, BIT(1), 0);
|
|
|
|
/* Enable PHY auto speed down */
|
|
phy_modify_paged(phydev, 0x0a44, 0x11, 0, BIT(3) | BIT(2));
|
|
|
|
rtl8168g_phy_adjust_10m_aldps(phydev);
|
|
|
|
/* EEE auto-fallback function */
|
|
phy_modify_paged(phydev, 0x0a4b, 0x11, 0, BIT(2));
|
|
|
|
/* Enable UC LPF tune function */
|
|
r8168g_phy_param(phydev, 0x8012, 0x0000, 0x8000);
|
|
|
|
phy_modify_paged(phydev, 0x0c42, 0x11, BIT(13), BIT(14));
|
|
|
|
/* Improve SWR Efficiency */
|
|
phy_write(phydev, 0x1f, 0x0bcd);
|
|
phy_write(phydev, 0x14, 0x5065);
|
|
phy_write(phydev, 0x14, 0xd065);
|
|
phy_write(phydev, 0x1f, 0x0bc8);
|
|
phy_write(phydev, 0x11, 0x5655);
|
|
phy_write(phydev, 0x1f, 0x0bcd);
|
|
phy_write(phydev, 0x14, 0x1065);
|
|
phy_write(phydev, 0x14, 0x9065);
|
|
phy_write(phydev, 0x14, 0x1065);
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
|
|
rtl8168g_disable_aldps(phydev);
|
|
rtl8168g_config_eee_phy(phydev);
|
|
}
|
|
|
|
static void rtl8168g_2_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
r8169_apply_firmware(tp);
|
|
rtl8168g_config_eee_phy(phydev);
|
|
}
|
|
|
|
static void rtl8168h_1_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
u16 dout_tapbin;
|
|
u32 data;
|
|
|
|
r8169_apply_firmware(tp);
|
|
|
|
/* CHN EST parameters adjust - giga master */
|
|
r8168g_phy_param(phydev, 0x809b, 0xf800, 0x8000);
|
|
r8168g_phy_param(phydev, 0x80a2, 0xff00, 0x8000);
|
|
r8168g_phy_param(phydev, 0x80a4, 0xff00, 0x8500);
|
|
r8168g_phy_param(phydev, 0x809c, 0xff00, 0xbd00);
|
|
|
|
/* CHN EST parameters adjust - giga slave */
|
|
r8168g_phy_param(phydev, 0x80ad, 0xf800, 0x7000);
|
|
r8168g_phy_param(phydev, 0x80b4, 0xff00, 0x5000);
|
|
r8168g_phy_param(phydev, 0x80ac, 0xff00, 0x4000);
|
|
|
|
/* CHN EST parameters adjust - fnet */
|
|
r8168g_phy_param(phydev, 0x808e, 0xff00, 0x1200);
|
|
r8168g_phy_param(phydev, 0x8090, 0xff00, 0xe500);
|
|
r8168g_phy_param(phydev, 0x8092, 0xff00, 0x9f00);
|
|
|
|
/* enable R-tune & PGA-retune function */
|
|
dout_tapbin = 0;
|
|
data = phy_read_paged(phydev, 0x0a46, 0x13);
|
|
data &= 3;
|
|
data <<= 2;
|
|
dout_tapbin |= data;
|
|
data = phy_read_paged(phydev, 0x0a46, 0x12);
|
|
data &= 0xc000;
|
|
data >>= 14;
|
|
dout_tapbin |= data;
|
|
dout_tapbin = ~(dout_tapbin ^ 0x08);
|
|
dout_tapbin <<= 12;
|
|
dout_tapbin &= 0xf000;
|
|
|
|
r8168g_phy_param(phydev, 0x827a, 0xf000, dout_tapbin);
|
|
r8168g_phy_param(phydev, 0x827b, 0xf000, dout_tapbin);
|
|
r8168g_phy_param(phydev, 0x827c, 0xf000, dout_tapbin);
|
|
r8168g_phy_param(phydev, 0x827d, 0xf000, dout_tapbin);
|
|
r8168g_phy_param(phydev, 0x0811, 0x0000, 0x0800);
|
|
phy_modify_paged(phydev, 0x0a42, 0x16, 0x0000, 0x0002);
|
|
|
|
rtl8168g_enable_gphy_10m(phydev);
|
|
|
|
/* SAR ADC performance */
|
|
phy_modify_paged(phydev, 0x0bca, 0x17, BIT(12) | BIT(13), BIT(14));
|
|
|
|
r8168g_phy_param(phydev, 0x803f, 0x3000, 0x0000);
|
|
r8168g_phy_param(phydev, 0x8047, 0x3000, 0x0000);
|
|
r8168g_phy_param(phydev, 0x804f, 0x3000, 0x0000);
|
|
r8168g_phy_param(phydev, 0x8057, 0x3000, 0x0000);
|
|
r8168g_phy_param(phydev, 0x805f, 0x3000, 0x0000);
|
|
r8168g_phy_param(phydev, 0x8067, 0x3000, 0x0000);
|
|
r8168g_phy_param(phydev, 0x806f, 0x3000, 0x0000);
|
|
|
|
/* disable phy pfm mode */
|
|
phy_modify_paged(phydev, 0x0a44, 0x11, BIT(7), 0);
|
|
|
|
rtl8168g_disable_aldps(phydev);
|
|
rtl8168h_config_eee_phy(phydev);
|
|
}
|
|
|
|
static void rtl8168h_2_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
u16 ioffset, rlen;
|
|
u32 data;
|
|
|
|
r8169_apply_firmware(tp);
|
|
|
|
/* CHIN EST parameter update */
|
|
r8168g_phy_param(phydev, 0x808a, 0x003f, 0x000a);
|
|
|
|
/* enable R-tune & PGA-retune function */
|
|
r8168g_phy_param(phydev, 0x0811, 0x0000, 0x0800);
|
|
phy_modify_paged(phydev, 0x0a42, 0x16, 0x0000, 0x0002);
|
|
|
|
rtl8168g_enable_gphy_10m(phydev);
|
|
|
|
ioffset = rtl8168h_2_get_adc_bias_ioffset(tp);
|
|
if (ioffset != 0xffff)
|
|
phy_write_paged(phydev, 0x0bcf, 0x16, ioffset);
|
|
|
|
/* Modify rlen (TX LPF corner frequency) level */
|
|
data = phy_read_paged(phydev, 0x0bcd, 0x16);
|
|
data &= 0x000f;
|
|
rlen = 0;
|
|
if (data > 3)
|
|
rlen = data - 3;
|
|
data = rlen | (rlen << 4) | (rlen << 8) | (rlen << 12);
|
|
phy_write_paged(phydev, 0x0bcd, 0x17, data);
|
|
|
|
/* disable phy pfm mode */
|
|
phy_modify_paged(phydev, 0x0a44, 0x11, BIT(7), 0);
|
|
|
|
rtl8168g_disable_aldps(phydev);
|
|
rtl8168g_config_eee_phy(phydev);
|
|
}
|
|
|
|
static void rtl8168ep_1_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
/* Enable PHY auto speed down */
|
|
phy_modify_paged(phydev, 0x0a44, 0x11, 0, BIT(3) | BIT(2));
|
|
|
|
rtl8168g_phy_adjust_10m_aldps(phydev);
|
|
|
|
/* Enable EEE auto-fallback function */
|
|
phy_modify_paged(phydev, 0x0a4b, 0x11, 0, BIT(2));
|
|
|
|
/* Enable UC LPF tune function */
|
|
r8168g_phy_param(phydev, 0x8012, 0x0000, 0x8000);
|
|
|
|
/* set rg_sel_sdm_rate */
|
|
phy_modify_paged(phydev, 0x0c42, 0x11, BIT(13), BIT(14));
|
|
|
|
rtl8168g_disable_aldps(phydev);
|
|
rtl8168g_config_eee_phy(phydev);
|
|
}
|
|
|
|
static void rtl8168ep_2_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
rtl8168g_phy_adjust_10m_aldps(phydev);
|
|
|
|
/* Enable UC LPF tune function */
|
|
r8168g_phy_param(phydev, 0x8012, 0x0000, 0x8000);
|
|
|
|
/* Set rg_sel_sdm_rate */
|
|
phy_modify_paged(phydev, 0x0c42, 0x11, BIT(13), BIT(14));
|
|
|
|
/* Channel estimation parameters */
|
|
r8168g_phy_param(phydev, 0x80f3, 0xff00, 0x8b00);
|
|
r8168g_phy_param(phydev, 0x80f0, 0xff00, 0x3a00);
|
|
r8168g_phy_param(phydev, 0x80ef, 0xff00, 0x0500);
|
|
r8168g_phy_param(phydev, 0x80f6, 0xff00, 0x6e00);
|
|
r8168g_phy_param(phydev, 0x80ec, 0xff00, 0x6800);
|
|
r8168g_phy_param(phydev, 0x80ed, 0xff00, 0x7c00);
|
|
r8168g_phy_param(phydev, 0x80f2, 0xff00, 0xf400);
|
|
r8168g_phy_param(phydev, 0x80f4, 0xff00, 0x8500);
|
|
r8168g_phy_param(phydev, 0x8110, 0xff00, 0xa800);
|
|
r8168g_phy_param(phydev, 0x810f, 0xff00, 0x1d00);
|
|
r8168g_phy_param(phydev, 0x8111, 0xff00, 0xf500);
|
|
r8168g_phy_param(phydev, 0x8113, 0xff00, 0x6100);
|
|
r8168g_phy_param(phydev, 0x8115, 0xff00, 0x9200);
|
|
r8168g_phy_param(phydev, 0x810e, 0xff00, 0x0400);
|
|
r8168g_phy_param(phydev, 0x810c, 0xff00, 0x7c00);
|
|
r8168g_phy_param(phydev, 0x810b, 0xff00, 0x5a00);
|
|
r8168g_phy_param(phydev, 0x80d1, 0xff00, 0xff00);
|
|
r8168g_phy_param(phydev, 0x80cd, 0xff00, 0x9e00);
|
|
r8168g_phy_param(phydev, 0x80d3, 0xff00, 0x0e00);
|
|
r8168g_phy_param(phydev, 0x80d5, 0xff00, 0xca00);
|
|
r8168g_phy_param(phydev, 0x80d7, 0xff00, 0x8400);
|
|
|
|
/* Force PWM-mode */
|
|
phy_write(phydev, 0x1f, 0x0bcd);
|
|
phy_write(phydev, 0x14, 0x5065);
|
|
phy_write(phydev, 0x14, 0xd065);
|
|
phy_write(phydev, 0x1f, 0x0bc8);
|
|
phy_write(phydev, 0x12, 0x00ed);
|
|
phy_write(phydev, 0x1f, 0x0bcd);
|
|
phy_write(phydev, 0x14, 0x1065);
|
|
phy_write(phydev, 0x14, 0x9065);
|
|
phy_write(phydev, 0x14, 0x1065);
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
|
|
rtl8168g_disable_aldps(phydev);
|
|
rtl8168g_config_eee_phy(phydev);
|
|
}
|
|
|
|
static void rtl8117_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
/* CHN EST parameters adjust - fnet */
|
|
r8168g_phy_param(phydev, 0x808e, 0xff00, 0x4800);
|
|
r8168g_phy_param(phydev, 0x8090, 0xff00, 0xcc00);
|
|
r8168g_phy_param(phydev, 0x8092, 0xff00, 0xb000);
|
|
|
|
r8168g_phy_param(phydev, 0x8088, 0xff00, 0x6000);
|
|
r8168g_phy_param(phydev, 0x808b, 0x3f00, 0x0b00);
|
|
r8168g_phy_param(phydev, 0x808d, 0x1f00, 0x0600);
|
|
r8168g_phy_param(phydev, 0x808c, 0xff00, 0xb000);
|
|
r8168g_phy_param(phydev, 0x80a0, 0xff00, 0x2800);
|
|
r8168g_phy_param(phydev, 0x80a2, 0xff00, 0x5000);
|
|
r8168g_phy_param(phydev, 0x809b, 0xf800, 0xb000);
|
|
r8168g_phy_param(phydev, 0x809a, 0xff00, 0x4b00);
|
|
r8168g_phy_param(phydev, 0x809d, 0x3f00, 0x0800);
|
|
r8168g_phy_param(phydev, 0x80a1, 0xff00, 0x7000);
|
|
r8168g_phy_param(phydev, 0x809f, 0x1f00, 0x0300);
|
|
r8168g_phy_param(phydev, 0x809e, 0xff00, 0x8800);
|
|
r8168g_phy_param(phydev, 0x80b2, 0xff00, 0x2200);
|
|
r8168g_phy_param(phydev, 0x80ad, 0xf800, 0x9800);
|
|
r8168g_phy_param(phydev, 0x80af, 0x3f00, 0x0800);
|
|
r8168g_phy_param(phydev, 0x80b3, 0xff00, 0x6f00);
|
|
r8168g_phy_param(phydev, 0x80b1, 0x1f00, 0x0300);
|
|
r8168g_phy_param(phydev, 0x80b0, 0xff00, 0x9300);
|
|
|
|
r8168g_phy_param(phydev, 0x8011, 0x0000, 0x0800);
|
|
|
|
rtl8168g_enable_gphy_10m(phydev);
|
|
|
|
r8168g_phy_param(phydev, 0x8016, 0x0000, 0x0400);
|
|
|
|
rtl8168g_disable_aldps(phydev);
|
|
rtl8168h_config_eee_phy(phydev);
|
|
}
|
|
|
|
static void rtl8102e_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
static const struct phy_reg phy_reg_init[] = {
|
|
{ 0x1f, 0x0003 },
|
|
{ 0x08, 0x441d },
|
|
{ 0x01, 0x9100 },
|
|
{ 0x1f, 0x0000 }
|
|
};
|
|
|
|
phy_set_bits(phydev, 0x11, BIT(12));
|
|
phy_set_bits(phydev, 0x19, BIT(13));
|
|
phy_set_bits(phydev, 0x10, BIT(15));
|
|
|
|
rtl_writephy_batch(phydev, phy_reg_init);
|
|
}
|
|
|
|
static void rtl8401_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
phy_set_bits(phydev, 0x11, BIT(12));
|
|
phy_modify_paged(phydev, 0x0002, 0x0f, 0x0000, 0x0003);
|
|
}
|
|
|
|
static void rtl8105e_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
/* Disable ALDPS before ram code */
|
|
phy_write(phydev, 0x18, 0x0310);
|
|
msleep(100);
|
|
|
|
r8169_apply_firmware(tp);
|
|
|
|
phy_write_paged(phydev, 0x0005, 0x1a, 0x0000);
|
|
phy_write_paged(phydev, 0x0004, 0x1c, 0x0000);
|
|
phy_write_paged(phydev, 0x0001, 0x15, 0x7701);
|
|
}
|
|
|
|
static void rtl8402_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
/* Disable ALDPS before setting firmware */
|
|
phy_write(phydev, 0x18, 0x0310);
|
|
msleep(20);
|
|
|
|
r8169_apply_firmware(tp);
|
|
|
|
/* EEE setting */
|
|
phy_write(phydev, 0x1f, 0x0004);
|
|
phy_write(phydev, 0x10, 0x401f);
|
|
phy_write(phydev, 0x19, 0x7030);
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
}
|
|
|
|
static void rtl8106e_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
static const struct phy_reg phy_reg_init[] = {
|
|
{ 0x1f, 0x0004 },
|
|
{ 0x10, 0xc07f },
|
|
{ 0x19, 0x7030 },
|
|
{ 0x1f, 0x0000 }
|
|
};
|
|
|
|
/* Disable ALDPS before ram code */
|
|
phy_write(phydev, 0x18, 0x0310);
|
|
msleep(100);
|
|
|
|
r8169_apply_firmware(tp);
|
|
|
|
rtl_writephy_batch(phydev, phy_reg_init);
|
|
}
|
|
|
|
static void rtl8125_legacy_force_mode(struct phy_device *phydev)
|
|
{
|
|
phy_modify_paged(phydev, 0xa5b, 0x12, BIT(15), 0);
|
|
}
|
|
|
|
static void rtl8125a_1_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
phy_modify_paged(phydev, 0xad4, 0x10, 0x03ff, 0x0084);
|
|
phy_modify_paged(phydev, 0xad4, 0x17, 0x0000, 0x0010);
|
|
phy_modify_paged(phydev, 0xad1, 0x13, 0x03ff, 0x0006);
|
|
phy_modify_paged(phydev, 0xad3, 0x11, 0x003f, 0x0006);
|
|
phy_modify_paged(phydev, 0xac0, 0x14, 0x0000, 0x1100);
|
|
phy_modify_paged(phydev, 0xac8, 0x15, 0xf000, 0x7000);
|
|
phy_modify_paged(phydev, 0xad1, 0x14, 0x0000, 0x0400);
|
|
phy_modify_paged(phydev, 0xad1, 0x15, 0x0000, 0x03ff);
|
|
phy_modify_paged(phydev, 0xad1, 0x16, 0x0000, 0x03ff);
|
|
|
|
r8168g_phy_param(phydev, 0x80ea, 0xff00, 0xc400);
|
|
r8168g_phy_param(phydev, 0x80eb, 0x0700, 0x0300);
|
|
r8168g_phy_param(phydev, 0x80f8, 0xff00, 0x1c00);
|
|
r8168g_phy_param(phydev, 0x80f1, 0xff00, 0x3000);
|
|
r8168g_phy_param(phydev, 0x80fe, 0xff00, 0xa500);
|
|
r8168g_phy_param(phydev, 0x8102, 0xff00, 0x5000);
|
|
r8168g_phy_param(phydev, 0x8105, 0xff00, 0x3300);
|
|
r8168g_phy_param(phydev, 0x8100, 0xff00, 0x7000);
|
|
r8168g_phy_param(phydev, 0x8104, 0xff00, 0xf000);
|
|
r8168g_phy_param(phydev, 0x8106, 0xff00, 0x6500);
|
|
r8168g_phy_param(phydev, 0x80dc, 0xff00, 0xed00);
|
|
r8168g_phy_param(phydev, 0x80df, 0x0000, 0x0100);
|
|
r8168g_phy_param(phydev, 0x80e1, 0x0100, 0x0000);
|
|
|
|
phy_modify_paged(phydev, 0xbf0, 0x13, 0x003f, 0x0038);
|
|
r8168g_phy_param(phydev, 0x819f, 0xffff, 0xd0b6);
|
|
|
|
phy_write_paged(phydev, 0xbc3, 0x12, 0x5555);
|
|
phy_modify_paged(phydev, 0xbf0, 0x15, 0x0e00, 0x0a00);
|
|
phy_modify_paged(phydev, 0xa5c, 0x10, 0x0400, 0x0000);
|
|
rtl8168g_enable_gphy_10m(phydev);
|
|
|
|
rtl8125a_config_eee_phy(phydev);
|
|
}
|
|
|
|
static void rtl8125a_2_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
int i;
|
|
|
|
phy_modify_paged(phydev, 0xad4, 0x17, 0x0000, 0x0010);
|
|
phy_modify_paged(phydev, 0xad1, 0x13, 0x03ff, 0x03ff);
|
|
phy_modify_paged(phydev, 0xad3, 0x11, 0x003f, 0x0006);
|
|
phy_modify_paged(phydev, 0xac0, 0x14, 0x1100, 0x0000);
|
|
phy_modify_paged(phydev, 0xacc, 0x10, 0x0003, 0x0002);
|
|
phy_modify_paged(phydev, 0xad4, 0x10, 0x00e7, 0x0044);
|
|
phy_modify_paged(phydev, 0xac1, 0x12, 0x0080, 0x0000);
|
|
phy_modify_paged(phydev, 0xac8, 0x10, 0x0300, 0x0000);
|
|
phy_modify_paged(phydev, 0xac5, 0x17, 0x0007, 0x0002);
|
|
phy_write_paged(phydev, 0xad4, 0x16, 0x00a8);
|
|
phy_write_paged(phydev, 0xac5, 0x16, 0x01ff);
|
|
phy_modify_paged(phydev, 0xac8, 0x15, 0x00f0, 0x0030);
|
|
|
|
phy_write(phydev, 0x1f, 0x0b87);
|
|
phy_write(phydev, 0x16, 0x80a2);
|
|
phy_write(phydev, 0x17, 0x0153);
|
|
phy_write(phydev, 0x16, 0x809c);
|
|
phy_write(phydev, 0x17, 0x0153);
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
|
|
phy_write(phydev, 0x1f, 0x0a43);
|
|
phy_write(phydev, 0x13, 0x81B3);
|
|
phy_write(phydev, 0x14, 0x0043);
|
|
phy_write(phydev, 0x14, 0x00A7);
|
|
phy_write(phydev, 0x14, 0x00D6);
|
|
phy_write(phydev, 0x14, 0x00EC);
|
|
phy_write(phydev, 0x14, 0x00F6);
|
|
phy_write(phydev, 0x14, 0x00FB);
|
|
phy_write(phydev, 0x14, 0x00FD);
|
|
phy_write(phydev, 0x14, 0x00FF);
|
|
phy_write(phydev, 0x14, 0x00BB);
|
|
phy_write(phydev, 0x14, 0x0058);
|
|
phy_write(phydev, 0x14, 0x0029);
|
|
phy_write(phydev, 0x14, 0x0013);
|
|
phy_write(phydev, 0x14, 0x0009);
|
|
phy_write(phydev, 0x14, 0x0004);
|
|
phy_write(phydev, 0x14, 0x0002);
|
|
for (i = 0; i < 25; i++)
|
|
phy_write(phydev, 0x14, 0x0000);
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
|
|
r8168g_phy_param(phydev, 0x8257, 0xffff, 0x020F);
|
|
r8168g_phy_param(phydev, 0x80ea, 0xffff, 0x7843);
|
|
|
|
r8169_apply_firmware(tp);
|
|
|
|
phy_modify_paged(phydev, 0xd06, 0x14, 0x0000, 0x2000);
|
|
|
|
r8168g_phy_param(phydev, 0x81a2, 0x0000, 0x0100);
|
|
|
|
phy_modify_paged(phydev, 0xb54, 0x16, 0xff00, 0xdb00);
|
|
phy_modify_paged(phydev, 0xa45, 0x12, 0x0001, 0x0000);
|
|
phy_modify_paged(phydev, 0xa5d, 0x12, 0x0000, 0x0020);
|
|
phy_modify_paged(phydev, 0xad4, 0x17, 0x0010, 0x0000);
|
|
phy_modify_paged(phydev, 0xa86, 0x15, 0x0001, 0x0000);
|
|
rtl8168g_enable_gphy_10m(phydev);
|
|
|
|
rtl8125a_config_eee_phy(phydev);
|
|
}
|
|
|
|
static void rtl8125b_hw_phy_config(struct rtl8169_private *tp,
|
|
struct phy_device *phydev)
|
|
{
|
|
r8169_apply_firmware(tp);
|
|
|
|
phy_modify_paged(phydev, 0xa44, 0x11, 0x0000, 0x0800);
|
|
phy_modify_paged(phydev, 0xac4, 0x13, 0x00f0, 0x0090);
|
|
phy_modify_paged(phydev, 0xad3, 0x10, 0x0003, 0x0001);
|
|
|
|
phy_write(phydev, 0x1f, 0x0b87);
|
|
phy_write(phydev, 0x16, 0x80f5);
|
|
phy_write(phydev, 0x17, 0x760e);
|
|
phy_write(phydev, 0x16, 0x8107);
|
|
phy_write(phydev, 0x17, 0x360e);
|
|
phy_write(phydev, 0x16, 0x8551);
|
|
phy_modify(phydev, 0x17, 0xff00, 0x0800);
|
|
phy_write(phydev, 0x1f, 0x0000);
|
|
|
|
phy_modify_paged(phydev, 0xbf0, 0x10, 0xe000, 0xa000);
|
|
phy_modify_paged(phydev, 0xbf4, 0x13, 0x0f00, 0x0300);
|
|
|
|
r8168g_phy_param(phydev, 0x8044, 0xffff, 0x2417);
|
|
r8168g_phy_param(phydev, 0x804a, 0xffff, 0x2417);
|
|
r8168g_phy_param(phydev, 0x8050, 0xffff, 0x2417);
|
|
r8168g_phy_param(phydev, 0x8056, 0xffff, 0x2417);
|
|
r8168g_phy_param(phydev, 0x805c, 0xffff, 0x2417);
|
|
r8168g_phy_param(phydev, 0x8062, 0xffff, 0x2417);
|
|
r8168g_phy_param(phydev, 0x8068, 0xffff, 0x2417);
|
|
r8168g_phy_param(phydev, 0x806e, 0xffff, 0x2417);
|
|
r8168g_phy_param(phydev, 0x8074, 0xffff, 0x2417);
|
|
r8168g_phy_param(phydev, 0x807a, 0xffff, 0x2417);
|
|
|
|
phy_modify_paged(phydev, 0xa4c, 0x15, 0x0000, 0x0040);
|
|
phy_modify_paged(phydev, 0xbf8, 0x12, 0xe000, 0xa000);
|
|
|
|
rtl8125_legacy_force_mode(phydev);
|
|
rtl8125b_config_eee_phy(phydev);
|
|
}
|
|
|
|
void r8169_hw_phy_config(struct rtl8169_private *tp, struct phy_device *phydev,
|
|
enum mac_version ver)
|
|
{
|
|
static const rtl_phy_cfg_fct phy_configs[] = {
|
|
/* PCI devices. */
|
|
[RTL_GIGA_MAC_VER_02] = rtl8169s_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_03] = rtl8169s_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_04] = rtl8169sb_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_05] = rtl8169scd_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_06] = rtl8169sce_hw_phy_config,
|
|
/* PCI-E devices. */
|
|
[RTL_GIGA_MAC_VER_07] = rtl8102e_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_08] = rtl8102e_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_09] = rtl8102e_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_10] = NULL,
|
|
[RTL_GIGA_MAC_VER_11] = rtl8168bb_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_12] = rtl8168bef_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_13] = NULL,
|
|
[RTL_GIGA_MAC_VER_14] = rtl8401_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_16] = NULL,
|
|
[RTL_GIGA_MAC_VER_17] = rtl8168bef_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_18] = rtl8168cp_1_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_19] = rtl8168c_1_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_20] = rtl8168c_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_21] = rtl8168c_3_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_22] = rtl8168c_3_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_23] = rtl8168cp_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_24] = rtl8168cp_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_25] = rtl8168d_1_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_26] = rtl8168d_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_27] = rtl8168d_3_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_28] = rtl8168d_4_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_29] = rtl8105e_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_30] = rtl8105e_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_31] = NULL,
|
|
[RTL_GIGA_MAC_VER_32] = rtl8168e_1_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_33] = rtl8168e_1_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_34] = rtl8168e_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_35] = rtl8168f_1_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_36] = rtl8168f_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_37] = rtl8402_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_38] = rtl8411_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_39] = rtl8106e_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_40] = rtl8168g_1_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_41] = NULL,
|
|
[RTL_GIGA_MAC_VER_42] = rtl8168g_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_43] = rtl8168g_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_44] = rtl8168g_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_45] = rtl8168h_1_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_46] = rtl8168h_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_47] = rtl8168h_1_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_48] = rtl8168h_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_49] = rtl8168ep_1_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_50] = rtl8168ep_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_51] = rtl8168ep_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_52] = rtl8117_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_53] = rtl8117_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_60] = rtl8125a_1_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_61] = rtl8125a_2_hw_phy_config,
|
|
[RTL_GIGA_MAC_VER_63] = rtl8125b_hw_phy_config,
|
|
};
|
|
|
|
if (phy_configs[ver])
|
|
phy_configs[ver](tp, phydev);
|
|
}
|