mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 22:14:41 +08:00
897e1cf29e
Having rate registration during module load enables the use of error checking as well as reliable registration/unregistration pairing. Previously this was not possible as rate registration was done during _probe where _probe could be run for more than one device on the system. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
302 lines
9.1 KiB
C
302 lines
9.1 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* James P. Ketrenos <ipw2100-admin@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#ifndef __iwl_4965_rs_h__
|
|
#define __iwl_4965_rs_h__
|
|
|
|
#include "iwl-4965.h"
|
|
|
|
struct iwl4965_rate_info {
|
|
u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */
|
|
u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */
|
|
u8 plcp_mimo; /* uCode API: IWL_RATE_MIMO_6M_PLCP, etc. */
|
|
u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */
|
|
u8 prev_ieee; /* previous rate in IEEE speeds */
|
|
u8 next_ieee; /* next rate in IEEE speeds */
|
|
u8 prev_rs; /* previous rate used in rs algo */
|
|
u8 next_rs; /* next rate used in rs algo */
|
|
u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
|
|
u8 next_rs_tgg; /* next rate used in TGG rs algo */
|
|
};
|
|
|
|
/*
|
|
* These serve as indexes into
|
|
* struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT];
|
|
*/
|
|
enum {
|
|
IWL_RATE_1M_INDEX = 0,
|
|
IWL_RATE_2M_INDEX,
|
|
IWL_RATE_5M_INDEX,
|
|
IWL_RATE_11M_INDEX,
|
|
IWL_RATE_6M_INDEX,
|
|
IWL_RATE_9M_INDEX,
|
|
IWL_RATE_12M_INDEX,
|
|
IWL_RATE_18M_INDEX,
|
|
IWL_RATE_24M_INDEX,
|
|
IWL_RATE_36M_INDEX,
|
|
IWL_RATE_48M_INDEX,
|
|
IWL_RATE_54M_INDEX,
|
|
IWL_RATE_60M_INDEX,
|
|
IWL_RATE_COUNT,
|
|
IWL_RATE_INVM_INDEX = IWL_RATE_COUNT,
|
|
IWL_RATE_INVALID = IWL_RATE_INVM_INDEX
|
|
};
|
|
|
|
enum {
|
|
IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX,
|
|
IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX,
|
|
IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX,
|
|
IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX,
|
|
};
|
|
|
|
/* #define vs. enum to keep from defaulting to 'large integer' */
|
|
#define IWL_RATE_6M_MASK (1 << IWL_RATE_6M_INDEX)
|
|
#define IWL_RATE_9M_MASK (1 << IWL_RATE_9M_INDEX)
|
|
#define IWL_RATE_12M_MASK (1 << IWL_RATE_12M_INDEX)
|
|
#define IWL_RATE_18M_MASK (1 << IWL_RATE_18M_INDEX)
|
|
#define IWL_RATE_24M_MASK (1 << IWL_RATE_24M_INDEX)
|
|
#define IWL_RATE_36M_MASK (1 << IWL_RATE_36M_INDEX)
|
|
#define IWL_RATE_48M_MASK (1 << IWL_RATE_48M_INDEX)
|
|
#define IWL_RATE_54M_MASK (1 << IWL_RATE_54M_INDEX)
|
|
#define IWL_RATE_60M_MASK (1 << IWL_RATE_60M_INDEX)
|
|
#define IWL_RATE_1M_MASK (1 << IWL_RATE_1M_INDEX)
|
|
#define IWL_RATE_2M_MASK (1 << IWL_RATE_2M_INDEX)
|
|
#define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX)
|
|
#define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX)
|
|
|
|
/* 4965 uCode API values for legacy bit rates, both OFDM and CCK */
|
|
enum {
|
|
IWL_RATE_6M_PLCP = 13,
|
|
IWL_RATE_9M_PLCP = 15,
|
|
IWL_RATE_12M_PLCP = 5,
|
|
IWL_RATE_18M_PLCP = 7,
|
|
IWL_RATE_24M_PLCP = 9,
|
|
IWL_RATE_36M_PLCP = 11,
|
|
IWL_RATE_48M_PLCP = 1,
|
|
IWL_RATE_54M_PLCP = 3,
|
|
IWL_RATE_60M_PLCP = 3,
|
|
IWL_RATE_1M_PLCP = 10,
|
|
IWL_RATE_2M_PLCP = 20,
|
|
IWL_RATE_5M_PLCP = 55,
|
|
IWL_RATE_11M_PLCP = 110,
|
|
};
|
|
|
|
/* 4965 uCode API values for OFDM high-throughput (HT) bit rates */
|
|
enum {
|
|
IWL_RATE_SISO_6M_PLCP = 0,
|
|
IWL_RATE_SISO_12M_PLCP = 1,
|
|
IWL_RATE_SISO_18M_PLCP = 2,
|
|
IWL_RATE_SISO_24M_PLCP = 3,
|
|
IWL_RATE_SISO_36M_PLCP = 4,
|
|
IWL_RATE_SISO_48M_PLCP = 5,
|
|
IWL_RATE_SISO_54M_PLCP = 6,
|
|
IWL_RATE_SISO_60M_PLCP = 7,
|
|
IWL_RATE_MIMO_6M_PLCP = 0x8,
|
|
IWL_RATE_MIMO_12M_PLCP = 0x9,
|
|
IWL_RATE_MIMO_18M_PLCP = 0xa,
|
|
IWL_RATE_MIMO_24M_PLCP = 0xb,
|
|
IWL_RATE_MIMO_36M_PLCP = 0xc,
|
|
IWL_RATE_MIMO_48M_PLCP = 0xd,
|
|
IWL_RATE_MIMO_54M_PLCP = 0xe,
|
|
IWL_RATE_MIMO_60M_PLCP = 0xf,
|
|
IWL_RATE_SISO_INVM_PLCP,
|
|
IWL_RATE_MIMO_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
|
|
};
|
|
|
|
/* MAC header values for bit rates */
|
|
enum {
|
|
IWL_RATE_6M_IEEE = 12,
|
|
IWL_RATE_9M_IEEE = 18,
|
|
IWL_RATE_12M_IEEE = 24,
|
|
IWL_RATE_18M_IEEE = 36,
|
|
IWL_RATE_24M_IEEE = 48,
|
|
IWL_RATE_36M_IEEE = 72,
|
|
IWL_RATE_48M_IEEE = 96,
|
|
IWL_RATE_54M_IEEE = 108,
|
|
IWL_RATE_60M_IEEE = 120,
|
|
IWL_RATE_1M_IEEE = 2,
|
|
IWL_RATE_2M_IEEE = 4,
|
|
IWL_RATE_5M_IEEE = 11,
|
|
IWL_RATE_11M_IEEE = 22,
|
|
};
|
|
|
|
#define IWL_CCK_BASIC_RATES_MASK \
|
|
(IWL_RATE_1M_MASK | \
|
|
IWL_RATE_2M_MASK)
|
|
|
|
#define IWL_CCK_RATES_MASK \
|
|
(IWL_BASIC_RATES_MASK | \
|
|
IWL_RATE_5M_MASK | \
|
|
IWL_RATE_11M_MASK)
|
|
|
|
#define IWL_OFDM_BASIC_RATES_MASK \
|
|
(IWL_RATE_6M_MASK | \
|
|
IWL_RATE_12M_MASK | \
|
|
IWL_RATE_24M_MASK)
|
|
|
|
#define IWL_OFDM_RATES_MASK \
|
|
(IWL_OFDM_BASIC_RATES_MASK | \
|
|
IWL_RATE_9M_MASK | \
|
|
IWL_RATE_18M_MASK | \
|
|
IWL_RATE_36M_MASK | \
|
|
IWL_RATE_48M_MASK | \
|
|
IWL_RATE_54M_MASK)
|
|
|
|
#define IWL_BASIC_RATES_MASK \
|
|
(IWL_OFDM_BASIC_RATES_MASK | \
|
|
IWL_CCK_BASIC_RATES_MASK)
|
|
|
|
#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1)
|
|
|
|
#define IWL_INVALID_VALUE -1
|
|
|
|
#define IWL_MIN_RSSI_VAL -100
|
|
#define IWL_MAX_RSSI_VAL 0
|
|
|
|
/* These values specify how many Tx frame attempts before
|
|
* searching for a new modulation mode */
|
|
#define IWL_LEGACY_FAILURE_LIMIT 160
|
|
#define IWL_LEGACY_SUCCESS_LIMIT 480
|
|
#define IWL_LEGACY_TABLE_COUNT 160
|
|
|
|
#define IWL_NONE_LEGACY_FAILURE_LIMIT 400
|
|
#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500
|
|
#define IWL_NONE_LEGACY_TABLE_COUNT 1500
|
|
|
|
/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
|
|
#define IWL_RS_GOOD_RATIO 12800 /* 100% */
|
|
#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */
|
|
#define IWL_RATE_HIGH_TH 10880 /* 85% */
|
|
#define IWL_RATE_INCREASE_TH 8960 /* 70% */
|
|
#define IWL_RATE_DECREASE_TH 1920 /* 15% */
|
|
|
|
/* possible actions when in legacy mode */
|
|
#define IWL_LEGACY_SWITCH_ANTENNA 0
|
|
#define IWL_LEGACY_SWITCH_SISO 1
|
|
#define IWL_LEGACY_SWITCH_MIMO 2
|
|
|
|
/* possible actions when in siso mode */
|
|
#define IWL_SISO_SWITCH_ANTENNA 0
|
|
#define IWL_SISO_SWITCH_MIMO 1
|
|
#define IWL_SISO_SWITCH_GI 2
|
|
|
|
/* possible actions when in mimo mode */
|
|
#define IWL_MIMO_SWITCH_ANTENNA_A 0
|
|
#define IWL_MIMO_SWITCH_ANTENNA_B 1
|
|
#define IWL_MIMO_SWITCH_GI 2
|
|
|
|
#define IWL_ACTION_LIMIT 3 /* # possible actions */
|
|
|
|
#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */
|
|
|
|
/* load per tid defines for A-MPDU activation */
|
|
#define IWL_AGG_TPT_THREHOLD 0
|
|
#define IWL_AGG_LOAD_THRESHOLD 10
|
|
#define IWL_AGG_ALL_TID 0xff
|
|
#define TID_QUEUE_CELL_SPACING 50 /*mS */
|
|
#define TID_QUEUE_MAX_SIZE 20
|
|
#define TID_ROUND_VALUE 5 /* mS */
|
|
#define TID_MAX_LOAD_COUNT 8
|
|
|
|
#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
|
|
#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
|
|
|
|
extern const struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT];
|
|
|
|
enum iwl4965_table_type {
|
|
LQ_NONE,
|
|
LQ_G, /* legacy types */
|
|
LQ_A,
|
|
LQ_SISO, /* high-throughput types */
|
|
LQ_MIMO,
|
|
LQ_MAX,
|
|
};
|
|
|
|
#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A))
|
|
#define is_siso(tbl) (((tbl) == LQ_SISO))
|
|
#define is_mimo(tbl) (((tbl) == LQ_MIMO))
|
|
#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl))
|
|
#define is_a_band(tbl) (((tbl) == LQ_A))
|
|
#define is_g_and(tbl) (((tbl) == LQ_G))
|
|
|
|
/* 4965 has 2 antennas/chains for Tx (but 3 for Rx) */
|
|
enum iwl4965_antenna_type {
|
|
ANT_NONE,
|
|
ANT_MAIN,
|
|
ANT_AUX,
|
|
ANT_BOTH,
|
|
};
|
|
|
|
static inline u8 iwl4965_get_prev_ieee_rate(u8 rate_index)
|
|
{
|
|
u8 rate = iwl4965_rates[rate_index].prev_ieee;
|
|
|
|
if (rate == IWL_RATE_INVALID)
|
|
rate = rate_index;
|
|
return rate;
|
|
}
|
|
|
|
extern int iwl4965_hwrate_to_plcp_idx(u32 rate_n_flags);
|
|
|
|
/**
|
|
* iwl4965_fill_rs_info - Fill an output text buffer with the rate representation
|
|
*
|
|
* NOTE: This is provided as a quick mechanism for a user to visualize
|
|
* the performance of the rate control algorithm and is not meant to be
|
|
* parsed software.
|
|
*/
|
|
extern int iwl4965_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id);
|
|
|
|
/**
|
|
* iwl4965_rate_scale_init - Initialize the rate scale table based on assoc info
|
|
*
|
|
* The specific throughput table used is based on the type of network
|
|
* the associated with, including A, B, G, and G w/ TGG protection
|
|
*/
|
|
extern void iwl4965_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id);
|
|
|
|
/**
|
|
* iwl4965_rate_control_register - Register the rate control algorithm callbacks
|
|
*
|
|
* Since the rate control algorithm is hardware specific, there is no need
|
|
* or reason to place it as a stand alone module. The driver can call
|
|
* iwl4965_rate_control_register in order to register the rate control callbacks
|
|
* with the mac80211 subsystem. This should be performed prior to calling
|
|
* ieee80211_register_hw
|
|
*
|
|
*/
|
|
extern int iwl4965_rate_control_register(void);
|
|
|
|
/**
|
|
* iwl4965_rate_control_unregister - Unregister the rate control callbacks
|
|
*
|
|
* This should be called after calling ieee80211_unregister_hw, but before
|
|
* the driver is unloaded.
|
|
*/
|
|
extern void iwl4965_rate_control_unregister(void);
|
|
|
|
#endif
|