linux/kernel/irq/affinity.c
Long Li 46ed4f4fa1 genirq/affinity: Spread IRQs to all available NUMA nodes
[ Upstream commit b825921990 ]

If the number of NUMA nodes exceeds the number of MSI/MSI-X interrupts
which are allocated for a device, the interrupt affinity spreading code
fails to spread them across all nodes.

The reason is, that the spreading code starts from node 0 and continues up
to the number of interrupts requested for allocation. This leaves the nodes
past the last interrupt unused.

This results in interrupt concentration on the first nodes which violates
the assumption of the block layer that all nodes are covered evenly. As a
consequence the NUMA nodes above the number of interrupts are all assigned
to hardware queue 0 and therefore NUMA node 0, which results in bad
performance and has CPU hotplug implications, because queue 0 gets shut
down when the last CPU of node 0 is offlined.

Go over all NUMA nodes and assign them round-robin to all requested
interrupts to solve this.

[ tglx: Massaged changelog ]

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Link: https://lkml.kernel.org/r/20181102180248.13583-1-longli@linuxonhyperv.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12 19:46:57 +01:00

270 lines
6.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016 Thomas Gleixner.
* Copyright (C) 2016-2017 Christoph Hellwig.
*/
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/cpu.h>
static void irq_spread_init_one(struct cpumask *irqmsk, struct cpumask *nmsk,
int cpus_per_vec)
{
const struct cpumask *siblmsk;
int cpu, sibl;
for ( ; cpus_per_vec > 0; ) {
cpu = cpumask_first(nmsk);
/* Should not happen, but I'm too lazy to think about it */
if (cpu >= nr_cpu_ids)
return;
cpumask_clear_cpu(cpu, nmsk);
cpumask_set_cpu(cpu, irqmsk);
cpus_per_vec--;
/* If the cpu has siblings, use them first */
siblmsk = topology_sibling_cpumask(cpu);
for (sibl = -1; cpus_per_vec > 0; ) {
sibl = cpumask_next(sibl, siblmsk);
if (sibl >= nr_cpu_ids)
break;
if (!cpumask_test_and_clear_cpu(sibl, nmsk))
continue;
cpumask_set_cpu(sibl, irqmsk);
cpus_per_vec--;
}
}
}
static cpumask_var_t *alloc_node_to_cpumask(void)
{
cpumask_var_t *masks;
int node;
masks = kcalloc(nr_node_ids, sizeof(cpumask_var_t), GFP_KERNEL);
if (!masks)
return NULL;
for (node = 0; node < nr_node_ids; node++) {
if (!zalloc_cpumask_var(&masks[node], GFP_KERNEL))
goto out_unwind;
}
return masks;
out_unwind:
while (--node >= 0)
free_cpumask_var(masks[node]);
kfree(masks);
return NULL;
}
static void free_node_to_cpumask(cpumask_var_t *masks)
{
int node;
for (node = 0; node < nr_node_ids; node++)
free_cpumask_var(masks[node]);
kfree(masks);
}
static void build_node_to_cpumask(cpumask_var_t *masks)
{
int cpu;
for_each_possible_cpu(cpu)
cpumask_set_cpu(cpu, masks[cpu_to_node(cpu)]);
}
static int get_nodes_in_cpumask(cpumask_var_t *node_to_cpumask,
const struct cpumask *mask, nodemask_t *nodemsk)
{
int n, nodes = 0;
/* Calculate the number of nodes in the supplied affinity mask */
for_each_node(n) {
if (cpumask_intersects(mask, node_to_cpumask[n])) {
node_set(n, *nodemsk);
nodes++;
}
}
return nodes;
}
static int irq_build_affinity_masks(const struct irq_affinity *affd,
int startvec, int numvecs,
cpumask_var_t *node_to_cpumask,
const struct cpumask *cpu_mask,
struct cpumask *nmsk,
struct cpumask *masks)
{
int n, nodes, cpus_per_vec, extra_vecs, done = 0;
int last_affv = affd->pre_vectors + numvecs;
int curvec = startvec;
nodemask_t nodemsk = NODE_MASK_NONE;
if (!cpumask_weight(cpu_mask))
return 0;
nodes = get_nodes_in_cpumask(node_to_cpumask, cpu_mask, &nodemsk);
/*
* If the number of nodes in the mask is greater than or equal the
* number of vectors we just spread the vectors across the nodes.
*/
if (numvecs <= nodes) {
for_each_node_mask(n, nodemsk) {
cpumask_or(masks + curvec, masks + curvec, node_to_cpumask[n]);
if (++curvec == last_affv)
curvec = affd->pre_vectors;
}
done = numvecs;
goto out;
}
for_each_node_mask(n, nodemsk) {
int ncpus, v, vecs_to_assign, vecs_per_node;
/* Spread the vectors per node */
vecs_per_node = (numvecs - (curvec - affd->pre_vectors)) / nodes;
/* Get the cpus on this node which are in the mask */
cpumask_and(nmsk, cpu_mask, node_to_cpumask[n]);
/* Calculate the number of cpus per vector */
ncpus = cpumask_weight(nmsk);
vecs_to_assign = min(vecs_per_node, ncpus);
/* Account for rounding errors */
extra_vecs = ncpus - vecs_to_assign * (ncpus / vecs_to_assign);
for (v = 0; curvec < last_affv && v < vecs_to_assign;
curvec++, v++) {
cpus_per_vec = ncpus / vecs_to_assign;
/* Account for extra vectors to compensate rounding errors */
if (extra_vecs) {
cpus_per_vec++;
--extra_vecs;
}
irq_spread_init_one(masks + curvec, nmsk, cpus_per_vec);
}
done += v;
if (done >= numvecs)
break;
if (curvec >= last_affv)
curvec = affd->pre_vectors;
--nodes;
}
out:
return done;
}
/**
* irq_create_affinity_masks - Create affinity masks for multiqueue spreading
* @nvecs: The total number of vectors
* @affd: Description of the affinity requirements
*
* Returns the masks pointer or NULL if allocation failed.
*/
struct cpumask *
irq_create_affinity_masks(int nvecs, const struct irq_affinity *affd)
{
int affvecs = nvecs - affd->pre_vectors - affd->post_vectors;
int curvec, usedvecs;
cpumask_var_t nmsk, npresmsk, *node_to_cpumask;
struct cpumask *masks = NULL;
/*
* If there aren't any vectors left after applying the pre/post
* vectors don't bother with assigning affinity.
*/
if (nvecs == affd->pre_vectors + affd->post_vectors)
return NULL;
if (!zalloc_cpumask_var(&nmsk, GFP_KERNEL))
return NULL;
if (!zalloc_cpumask_var(&npresmsk, GFP_KERNEL))
goto outcpumsk;
node_to_cpumask = alloc_node_to_cpumask();
if (!node_to_cpumask)
goto outnpresmsk;
masks = kcalloc(nvecs, sizeof(*masks), GFP_KERNEL);
if (!masks)
goto outnodemsk;
/* Fill out vectors at the beginning that don't need affinity */
for (curvec = 0; curvec < affd->pre_vectors; curvec++)
cpumask_copy(masks + curvec, irq_default_affinity);
/* Stabilize the cpumasks */
get_online_cpus();
build_node_to_cpumask(node_to_cpumask);
/* Spread on present CPUs starting from affd->pre_vectors */
usedvecs = irq_build_affinity_masks(affd, curvec, affvecs,
node_to_cpumask, cpu_present_mask,
nmsk, masks);
/*
* Spread on non present CPUs starting from the next vector to be
* handled. If the spreading of present CPUs already exhausted the
* vector space, assign the non present CPUs to the already spread
* out vectors.
*/
if (usedvecs >= affvecs)
curvec = affd->pre_vectors;
else
curvec = affd->pre_vectors + usedvecs;
cpumask_andnot(npresmsk, cpu_possible_mask, cpu_present_mask);
usedvecs += irq_build_affinity_masks(affd, curvec, affvecs,
node_to_cpumask, npresmsk,
nmsk, masks);
put_online_cpus();
/* Fill out vectors at the end that don't need affinity */
if (usedvecs >= affvecs)
curvec = affd->pre_vectors + affvecs;
else
curvec = affd->pre_vectors + usedvecs;
for (; curvec < nvecs; curvec++)
cpumask_copy(masks + curvec, irq_default_affinity);
outnodemsk:
free_node_to_cpumask(node_to_cpumask);
outnpresmsk:
free_cpumask_var(npresmsk);
outcpumsk:
free_cpumask_var(nmsk);
return masks;
}
/**
* irq_calc_affinity_vectors - Calculate the optimal number of vectors
* @minvec: The minimum number of vectors available
* @maxvec: The maximum number of vectors available
* @affd: Description of the affinity requirements
*/
int irq_calc_affinity_vectors(int minvec, int maxvec, const struct irq_affinity *affd)
{
int resv = affd->pre_vectors + affd->post_vectors;
int vecs = maxvec - resv;
int ret;
if (resv > minvec)
return 0;
get_online_cpus();
ret = min_t(int, cpumask_weight(cpu_possible_mask), vecs) + resv;
put_online_cpus();
return ret;
}