mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
f393d9b130
This patch uniformizes PCI probing debug boot messages with dev_printk() intead of manual printk() It changes adress range output from [%llx, %llx] to [%#llx-%#llx], like in pci_request_region(). For example, it goes from the mixed-style: PCI: 0000:00:1b.0 reg 10 64bit mmio: [f4280000, f4283fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold to uniform: pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4280000-0xf4283fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold This patch has been runtime tested, boot log messages diffed, everything looks OK. Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
858 lines
22 KiB
C
858 lines
22 KiB
C
/*
|
|
* File: drivers/pci/pcie/aspm.c
|
|
* Enabling PCIE link L0s/L1 state and Clock Power Management
|
|
*
|
|
* Copyright (C) 2007 Intel
|
|
* Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
|
|
* Copyright (C) Shaohua Li (shaohua.li@intel.com)
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_regs.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pci-aspm.h>
|
|
#include "../pci.h"
|
|
|
|
#ifdef MODULE_PARAM_PREFIX
|
|
#undef MODULE_PARAM_PREFIX
|
|
#endif
|
|
#define MODULE_PARAM_PREFIX "pcie_aspm."
|
|
|
|
struct endpoint_state {
|
|
unsigned int l0s_acceptable_latency;
|
|
unsigned int l1_acceptable_latency;
|
|
};
|
|
|
|
struct pcie_link_state {
|
|
struct list_head sibiling;
|
|
struct pci_dev *pdev;
|
|
|
|
/* ASPM state */
|
|
unsigned int support_state;
|
|
unsigned int enabled_state;
|
|
unsigned int bios_aspm_state;
|
|
/* upstream component */
|
|
unsigned int l0s_upper_latency;
|
|
unsigned int l1_upper_latency;
|
|
/* downstream component */
|
|
unsigned int l0s_down_latency;
|
|
unsigned int l1_down_latency;
|
|
/* Clock PM state*/
|
|
unsigned int clk_pm_capable;
|
|
unsigned int clk_pm_enabled;
|
|
unsigned int bios_clk_state;
|
|
|
|
/*
|
|
* A pcie downstream port only has one slot under it, so at most there
|
|
* are 8 functions
|
|
*/
|
|
struct endpoint_state endpoints[8];
|
|
};
|
|
|
|
static int aspm_disabled, aspm_force;
|
|
static DEFINE_MUTEX(aspm_lock);
|
|
static LIST_HEAD(link_list);
|
|
|
|
#define POLICY_DEFAULT 0 /* BIOS default setting */
|
|
#define POLICY_PERFORMANCE 1 /* high performance */
|
|
#define POLICY_POWERSAVE 2 /* high power saving */
|
|
static int aspm_policy;
|
|
static const char *policy_str[] = {
|
|
[POLICY_DEFAULT] = "default",
|
|
[POLICY_PERFORMANCE] = "performance",
|
|
[POLICY_POWERSAVE] = "powersave"
|
|
};
|
|
|
|
static int policy_to_aspm_state(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
switch (aspm_policy) {
|
|
case POLICY_PERFORMANCE:
|
|
/* Disable ASPM and Clock PM */
|
|
return 0;
|
|
case POLICY_POWERSAVE:
|
|
/* Enable ASPM L0s/L1 */
|
|
return PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
|
|
case POLICY_DEFAULT:
|
|
return link_state->bios_aspm_state;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int policy_to_clkpm_state(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
switch (aspm_policy) {
|
|
case POLICY_PERFORMANCE:
|
|
/* Disable ASPM and Clock PM */
|
|
return 0;
|
|
case POLICY_POWERSAVE:
|
|
/* Disable Clock PM */
|
|
return 1;
|
|
case POLICY_DEFAULT:
|
|
return link_state->bios_clk_state;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void pcie_set_clock_pm(struct pci_dev *pdev, int enable)
|
|
{
|
|
struct pci_dev *child_dev;
|
|
int pos;
|
|
u16 reg16;
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
|
|
pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
|
|
if (!pos)
|
|
return;
|
|
pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, ®16);
|
|
if (enable)
|
|
reg16 |= PCI_EXP_LNKCTL_CLKREQ_EN;
|
|
else
|
|
reg16 &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
|
|
pci_write_config_word(child_dev, pos + PCI_EXP_LNKCTL, reg16);
|
|
}
|
|
link_state->clk_pm_enabled = !!enable;
|
|
}
|
|
|
|
static void pcie_check_clock_pm(struct pci_dev *pdev)
|
|
{
|
|
int pos;
|
|
u32 reg32;
|
|
u16 reg16;
|
|
int capable = 1, enabled = 1;
|
|
struct pci_dev *child_dev;
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
/* All functions should have the same cap and state, take the worst */
|
|
list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
|
|
pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
|
|
if (!pos)
|
|
return;
|
|
pci_read_config_dword(child_dev, pos + PCI_EXP_LNKCAP, ®32);
|
|
if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
|
|
capable = 0;
|
|
enabled = 0;
|
|
break;
|
|
}
|
|
pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, ®16);
|
|
if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
|
|
enabled = 0;
|
|
}
|
|
link_state->clk_pm_capable = capable;
|
|
link_state->clk_pm_enabled = enabled;
|
|
link_state->bios_clk_state = enabled;
|
|
pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev));
|
|
}
|
|
|
|
/*
|
|
* pcie_aspm_configure_common_clock: check if the 2 ends of a link
|
|
* could use common clock. If they are, configure them to use the
|
|
* common clock. That will reduce the ASPM state exit latency.
|
|
*/
|
|
static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
|
|
{
|
|
int pos, child_pos;
|
|
u16 reg16 = 0;
|
|
struct pci_dev *child_dev;
|
|
int same_clock = 1;
|
|
|
|
/*
|
|
* all functions of a slot should have the same Slot Clock
|
|
* Configuration, so just check one function
|
|
* */
|
|
child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev,
|
|
bus_list);
|
|
BUG_ON(!child_dev->is_pcie);
|
|
|
|
/* Check downstream component if bit Slot Clock Configuration is 1 */
|
|
child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
|
|
pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKSTA, ®16);
|
|
if (!(reg16 & PCI_EXP_LNKSTA_SLC))
|
|
same_clock = 0;
|
|
|
|
/* Check upstream component if bit Slot Clock Configuration is 1 */
|
|
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
|
|
pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16);
|
|
if (!(reg16 & PCI_EXP_LNKSTA_SLC))
|
|
same_clock = 0;
|
|
|
|
/* Configure downstream component, all functions */
|
|
list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
|
|
child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
|
|
pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
|
|
®16);
|
|
if (same_clock)
|
|
reg16 |= PCI_EXP_LNKCTL_CCC;
|
|
else
|
|
reg16 &= ~PCI_EXP_LNKCTL_CCC;
|
|
pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
|
|
reg16);
|
|
}
|
|
|
|
/* Configure upstream component */
|
|
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
|
|
if (same_clock)
|
|
reg16 |= PCI_EXP_LNKCTL_CCC;
|
|
else
|
|
reg16 &= ~PCI_EXP_LNKCTL_CCC;
|
|
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
|
|
|
|
/* retrain link */
|
|
reg16 |= PCI_EXP_LNKCTL_RL;
|
|
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
|
|
|
|
/* Wait for link training end */
|
|
while (1) {
|
|
pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16);
|
|
if (!(reg16 & PCI_EXP_LNKSTA_LT))
|
|
break;
|
|
cpu_relax();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* calc_L0S_latency: Convert L0s latency encoding to ns
|
|
*/
|
|
static unsigned int calc_L0S_latency(unsigned int latency_encoding, int ac)
|
|
{
|
|
unsigned int ns = 64;
|
|
|
|
if (latency_encoding == 0x7) {
|
|
if (ac)
|
|
ns = -1U;
|
|
else
|
|
ns = 5*1000; /* > 4us */
|
|
} else
|
|
ns *= (1 << latency_encoding);
|
|
return ns;
|
|
}
|
|
|
|
/*
|
|
* calc_L1_latency: Convert L1 latency encoding to ns
|
|
*/
|
|
static unsigned int calc_L1_latency(unsigned int latency_encoding, int ac)
|
|
{
|
|
unsigned int ns = 1000;
|
|
|
|
if (latency_encoding == 0x7) {
|
|
if (ac)
|
|
ns = -1U;
|
|
else
|
|
ns = 65*1000; /* > 64us */
|
|
} else
|
|
ns *= (1 << latency_encoding);
|
|
return ns;
|
|
}
|
|
|
|
static void pcie_aspm_get_cap_device(struct pci_dev *pdev, u32 *state,
|
|
unsigned int *l0s, unsigned int *l1, unsigned int *enabled)
|
|
{
|
|
int pos;
|
|
u16 reg16;
|
|
u32 reg32;
|
|
unsigned int latency;
|
|
|
|
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
|
|
pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, ®32);
|
|
*state = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
|
|
if (*state != PCIE_LINK_STATE_L0S &&
|
|
*state != (PCIE_LINK_STATE_L1|PCIE_LINK_STATE_L0S))
|
|
*state = 0;
|
|
if (*state == 0)
|
|
return;
|
|
|
|
latency = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
|
|
*l0s = calc_L0S_latency(latency, 0);
|
|
if (*state & PCIE_LINK_STATE_L1) {
|
|
latency = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
|
|
*l1 = calc_L1_latency(latency, 0);
|
|
}
|
|
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
|
|
*enabled = reg16 & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1);
|
|
}
|
|
|
|
static void pcie_aspm_cap_init(struct pci_dev *pdev)
|
|
{
|
|
struct pci_dev *child_dev;
|
|
u32 state, tmp;
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
/* upstream component states */
|
|
pcie_aspm_get_cap_device(pdev, &link_state->support_state,
|
|
&link_state->l0s_upper_latency,
|
|
&link_state->l1_upper_latency,
|
|
&link_state->enabled_state);
|
|
/* downstream component states, all functions have the same setting */
|
|
child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev,
|
|
bus_list);
|
|
pcie_aspm_get_cap_device(child_dev, &state,
|
|
&link_state->l0s_down_latency,
|
|
&link_state->l1_down_latency,
|
|
&tmp);
|
|
link_state->support_state &= state;
|
|
if (!link_state->support_state)
|
|
return;
|
|
link_state->enabled_state &= link_state->support_state;
|
|
link_state->bios_aspm_state = link_state->enabled_state;
|
|
|
|
/* ENDPOINT states*/
|
|
list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
|
|
int pos;
|
|
u32 reg32;
|
|
unsigned int latency;
|
|
struct endpoint_state *ep_state =
|
|
&link_state->endpoints[PCI_FUNC(child_dev->devfn)];
|
|
|
|
if (child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
|
|
child_dev->pcie_type != PCI_EXP_TYPE_LEG_END)
|
|
continue;
|
|
|
|
pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
|
|
pci_read_config_dword(child_dev, pos + PCI_EXP_DEVCAP, ®32);
|
|
latency = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
|
|
latency = calc_L0S_latency(latency, 1);
|
|
ep_state->l0s_acceptable_latency = latency;
|
|
if (link_state->support_state & PCIE_LINK_STATE_L1) {
|
|
latency = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
|
|
latency = calc_L1_latency(latency, 1);
|
|
ep_state->l1_acceptable_latency = latency;
|
|
}
|
|
}
|
|
}
|
|
|
|
static unsigned int __pcie_aspm_check_state_one(struct pci_dev *pdev,
|
|
unsigned int state)
|
|
{
|
|
struct pci_dev *parent_dev, *tmp_dev;
|
|
unsigned int latency, l1_latency = 0;
|
|
struct pcie_link_state *link_state;
|
|
struct endpoint_state *ep_state;
|
|
|
|
parent_dev = pdev->bus->self;
|
|
link_state = parent_dev->link_state;
|
|
state &= link_state->support_state;
|
|
if (state == 0)
|
|
return 0;
|
|
ep_state = &link_state->endpoints[PCI_FUNC(pdev->devfn)];
|
|
|
|
/*
|
|
* Check latency for endpoint device.
|
|
* TBD: The latency from the endpoint to root complex vary per
|
|
* switch's upstream link state above the device. Here we just do a
|
|
* simple check which assumes all links above the device can be in L1
|
|
* state, that is we just consider the worst case. If switch's upstream
|
|
* link can't be put into L0S/L1, then our check is too strictly.
|
|
*/
|
|
tmp_dev = pdev;
|
|
while (state & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) {
|
|
parent_dev = tmp_dev->bus->self;
|
|
link_state = parent_dev->link_state;
|
|
if (state & PCIE_LINK_STATE_L0S) {
|
|
latency = max_t(unsigned int,
|
|
link_state->l0s_upper_latency,
|
|
link_state->l0s_down_latency);
|
|
if (latency > ep_state->l0s_acceptable_latency)
|
|
state &= ~PCIE_LINK_STATE_L0S;
|
|
}
|
|
if (state & PCIE_LINK_STATE_L1) {
|
|
latency = max_t(unsigned int,
|
|
link_state->l1_upper_latency,
|
|
link_state->l1_down_latency);
|
|
if (latency + l1_latency >
|
|
ep_state->l1_acceptable_latency)
|
|
state &= ~PCIE_LINK_STATE_L1;
|
|
}
|
|
if (!parent_dev->bus->self) /* parent_dev is a root port */
|
|
break;
|
|
else {
|
|
/*
|
|
* parent_dev is the downstream port of a switch, make
|
|
* tmp_dev the upstream port of the switch
|
|
*/
|
|
tmp_dev = parent_dev->bus->self;
|
|
/*
|
|
* every switch on the path to root complex need 1 more
|
|
* microsecond for L1. Spec doesn't mention L0S.
|
|
*/
|
|
if (state & PCIE_LINK_STATE_L1)
|
|
l1_latency += 1000;
|
|
}
|
|
}
|
|
return state;
|
|
}
|
|
|
|
static unsigned int pcie_aspm_check_state(struct pci_dev *pdev,
|
|
unsigned int state)
|
|
{
|
|
struct pci_dev *child_dev;
|
|
|
|
/* If no child, disable the link */
|
|
if (list_empty(&pdev->subordinate->devices))
|
|
return 0;
|
|
list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
|
|
if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
|
|
/*
|
|
* If downstream component of a link is pci bridge, we
|
|
* disable ASPM for now for the link
|
|
* */
|
|
state = 0;
|
|
break;
|
|
}
|
|
if ((child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
|
|
child_dev->pcie_type != PCI_EXP_TYPE_LEG_END))
|
|
continue;
|
|
/* Device not in D0 doesn't need check latency */
|
|
if (child_dev->current_state == PCI_D1 ||
|
|
child_dev->current_state == PCI_D2 ||
|
|
child_dev->current_state == PCI_D3hot ||
|
|
child_dev->current_state == PCI_D3cold)
|
|
continue;
|
|
state = __pcie_aspm_check_state_one(child_dev, state);
|
|
}
|
|
return state;
|
|
}
|
|
|
|
static void __pcie_aspm_config_one_dev(struct pci_dev *pdev, unsigned int state)
|
|
{
|
|
u16 reg16;
|
|
int pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
|
|
|
|
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
|
|
reg16 &= ~0x3;
|
|
reg16 |= state;
|
|
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
|
|
}
|
|
|
|
static void __pcie_aspm_config_link(struct pci_dev *pdev, unsigned int state)
|
|
{
|
|
struct pci_dev *child_dev;
|
|
int valid = 1;
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
/*
|
|
* if the downstream component has pci bridge function, don't do ASPM
|
|
* now
|
|
*/
|
|
list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
|
|
if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
|
|
valid = 0;
|
|
break;
|
|
}
|
|
}
|
|
if (!valid)
|
|
return;
|
|
|
|
/*
|
|
* spec 2.0 suggests all functions should be configured the same
|
|
* setting for ASPM. Enabling ASPM L1 should be done in upstream
|
|
* component first and then downstream, and vice versa for disabling
|
|
* ASPM L1. Spec doesn't mention L0S.
|
|
*/
|
|
if (state & PCIE_LINK_STATE_L1)
|
|
__pcie_aspm_config_one_dev(pdev, state);
|
|
|
|
list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list)
|
|
__pcie_aspm_config_one_dev(child_dev, state);
|
|
|
|
if (!(state & PCIE_LINK_STATE_L1))
|
|
__pcie_aspm_config_one_dev(pdev, state);
|
|
|
|
link_state->enabled_state = state;
|
|
}
|
|
|
|
static void __pcie_aspm_configure_link_state(struct pci_dev *pdev,
|
|
unsigned int state)
|
|
{
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
if (link_state->support_state == 0)
|
|
return;
|
|
state &= PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
|
|
|
|
/* state 0 means disabling aspm */
|
|
state = pcie_aspm_check_state(pdev, state);
|
|
if (link_state->enabled_state == state)
|
|
return;
|
|
__pcie_aspm_config_link(pdev, state);
|
|
}
|
|
|
|
/*
|
|
* pcie_aspm_configure_link_state: enable/disable PCI express link state
|
|
* @pdev: the root port or switch downstream port
|
|
*/
|
|
static void pcie_aspm_configure_link_state(struct pci_dev *pdev,
|
|
unsigned int state)
|
|
{
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
__pcie_aspm_configure_link_state(pdev, state);
|
|
mutex_unlock(&aspm_lock);
|
|
up_read(&pci_bus_sem);
|
|
}
|
|
|
|
static void free_link_state(struct pci_dev *pdev)
|
|
{
|
|
kfree(pdev->link_state);
|
|
pdev->link_state = NULL;
|
|
}
|
|
|
|
static int pcie_aspm_sanity_check(struct pci_dev *pdev)
|
|
{
|
|
struct pci_dev *child_dev;
|
|
int child_pos;
|
|
u32 reg32;
|
|
|
|
/*
|
|
* Some functions in a slot might not all be PCIE functions, very
|
|
* strange. Disable ASPM for the whole slot
|
|
*/
|
|
list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
|
|
child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
|
|
if (!child_pos)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Disable ASPM for pre-1.1 PCIe device, we follow MS to use
|
|
* RBER bit to determine if a function is 1.1 version device
|
|
*/
|
|
pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP,
|
|
®32);
|
|
if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
|
|
dev_printk(KERN_INFO, &child_dev->dev, "disabling ASPM"
|
|
" on pre-1.1 PCIe device. You can enable it"
|
|
" with 'pcie_aspm=force'\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* pcie_aspm_init_link_state: Initiate PCI express link state.
|
|
* It is called after the pcie and its children devices are scaned.
|
|
* @pdev: the root port or switch downstream port
|
|
*/
|
|
void pcie_aspm_init_link_state(struct pci_dev *pdev)
|
|
{
|
|
unsigned int state;
|
|
struct pcie_link_state *link_state;
|
|
int error = 0;
|
|
|
|
if (aspm_disabled || !pdev->is_pcie || pdev->link_state)
|
|
return;
|
|
if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
|
|
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
|
|
return;
|
|
down_read(&pci_bus_sem);
|
|
if (list_empty(&pdev->subordinate->devices))
|
|
goto out;
|
|
|
|
if (pcie_aspm_sanity_check(pdev))
|
|
goto out;
|
|
|
|
mutex_lock(&aspm_lock);
|
|
|
|
link_state = kzalloc(sizeof(*link_state), GFP_KERNEL);
|
|
if (!link_state)
|
|
goto unlock_out;
|
|
pdev->link_state = link_state;
|
|
|
|
pcie_aspm_configure_common_clock(pdev);
|
|
|
|
pcie_aspm_cap_init(pdev);
|
|
|
|
/* config link state to avoid BIOS error */
|
|
state = pcie_aspm_check_state(pdev, policy_to_aspm_state(pdev));
|
|
__pcie_aspm_config_link(pdev, state);
|
|
|
|
pcie_check_clock_pm(pdev);
|
|
|
|
link_state->pdev = pdev;
|
|
list_add(&link_state->sibiling, &link_list);
|
|
|
|
unlock_out:
|
|
if (error)
|
|
free_link_state(pdev);
|
|
mutex_unlock(&aspm_lock);
|
|
out:
|
|
up_read(&pci_bus_sem);
|
|
}
|
|
|
|
/* @pdev: the endpoint device */
|
|
void pcie_aspm_exit_link_state(struct pci_dev *pdev)
|
|
{
|
|
struct pci_dev *parent = pdev->bus->self;
|
|
struct pcie_link_state *link_state = parent->link_state;
|
|
|
|
if (aspm_disabled || !pdev->is_pcie || !parent || !link_state)
|
|
return;
|
|
if (parent->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
|
|
parent->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
|
|
return;
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
|
|
/*
|
|
* All PCIe functions are in one slot, remove one function will remove
|
|
* the the whole slot, so just wait
|
|
*/
|
|
if (!list_empty(&parent->subordinate->devices))
|
|
goto out;
|
|
|
|
/* All functions are removed, so just disable ASPM for the link */
|
|
__pcie_aspm_config_one_dev(parent, 0);
|
|
list_del(&link_state->sibiling);
|
|
/* Clock PM is for endpoint device */
|
|
|
|
free_link_state(parent);
|
|
out:
|
|
mutex_unlock(&aspm_lock);
|
|
up_read(&pci_bus_sem);
|
|
}
|
|
|
|
/* @pdev: the root port or switch downstream port */
|
|
void pcie_aspm_pm_state_change(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
if (aspm_disabled || !pdev->is_pcie || !pdev->link_state)
|
|
return;
|
|
if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
|
|
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
|
|
return;
|
|
/*
|
|
* devices changed PM state, we should recheck if latency meets all
|
|
* functions' requirement
|
|
*/
|
|
pcie_aspm_configure_link_state(pdev, link_state->enabled_state);
|
|
}
|
|
|
|
/*
|
|
* pci_disable_link_state - disable pci device's link state, so the link will
|
|
* never enter specific states
|
|
*/
|
|
void pci_disable_link_state(struct pci_dev *pdev, int state)
|
|
{
|
|
struct pci_dev *parent = pdev->bus->self;
|
|
struct pcie_link_state *link_state;
|
|
|
|
if (aspm_disabled || !pdev->is_pcie)
|
|
return;
|
|
if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
|
|
pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
|
|
parent = pdev;
|
|
if (!parent || !parent->link_state)
|
|
return;
|
|
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
link_state = parent->link_state;
|
|
link_state->support_state &=
|
|
~(state & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1));
|
|
if (state & PCIE_LINK_STATE_CLKPM)
|
|
link_state->clk_pm_capable = 0;
|
|
|
|
__pcie_aspm_configure_link_state(parent, link_state->enabled_state);
|
|
if (!link_state->clk_pm_capable && link_state->clk_pm_enabled)
|
|
pcie_set_clock_pm(parent, 0);
|
|
mutex_unlock(&aspm_lock);
|
|
up_read(&pci_bus_sem);
|
|
}
|
|
EXPORT_SYMBOL(pci_disable_link_state);
|
|
|
|
static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp)
|
|
{
|
|
int i;
|
|
struct pci_dev *pdev;
|
|
struct pcie_link_state *link_state;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(policy_str); i++)
|
|
if (!strncmp(val, policy_str[i], strlen(policy_str[i])))
|
|
break;
|
|
if (i >= ARRAY_SIZE(policy_str))
|
|
return -EINVAL;
|
|
if (i == aspm_policy)
|
|
return 0;
|
|
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
aspm_policy = i;
|
|
list_for_each_entry(link_state, &link_list, sibiling) {
|
|
pdev = link_state->pdev;
|
|
__pcie_aspm_configure_link_state(pdev,
|
|
policy_to_aspm_state(pdev));
|
|
if (link_state->clk_pm_capable &&
|
|
link_state->clk_pm_enabled != policy_to_clkpm_state(pdev))
|
|
pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev));
|
|
|
|
}
|
|
mutex_unlock(&aspm_lock);
|
|
up_read(&pci_bus_sem);
|
|
return 0;
|
|
}
|
|
|
|
static int pcie_aspm_get_policy(char *buffer, struct kernel_param *kp)
|
|
{
|
|
int i, cnt = 0;
|
|
for (i = 0; i < ARRAY_SIZE(policy_str); i++)
|
|
if (i == aspm_policy)
|
|
cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
|
|
else
|
|
cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
|
|
return cnt;
|
|
}
|
|
|
|
module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
|
|
NULL, 0644);
|
|
|
|
#ifdef CONFIG_PCIEASPM_DEBUG
|
|
static ssize_t link_state_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pci_device = to_pci_dev(dev);
|
|
struct pcie_link_state *link_state = pci_device->link_state;
|
|
|
|
return sprintf(buf, "%d\n", link_state->enabled_state);
|
|
}
|
|
|
|
static ssize_t link_state_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t n)
|
|
{
|
|
struct pci_dev *pci_device = to_pci_dev(dev);
|
|
int state;
|
|
|
|
if (n < 1)
|
|
return -EINVAL;
|
|
state = buf[0]-'0';
|
|
if (state >= 0 && state <= 3) {
|
|
/* setup link aspm state */
|
|
pcie_aspm_configure_link_state(pci_device, state);
|
|
return n;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static ssize_t clk_ctl_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pci_device = to_pci_dev(dev);
|
|
struct pcie_link_state *link_state = pci_device->link_state;
|
|
|
|
return sprintf(buf, "%d\n", link_state->clk_pm_enabled);
|
|
}
|
|
|
|
static ssize_t clk_ctl_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t n)
|
|
{
|
|
struct pci_dev *pci_device = to_pci_dev(dev);
|
|
int state;
|
|
|
|
if (n < 1)
|
|
return -EINVAL;
|
|
state = buf[0]-'0';
|
|
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
pcie_set_clock_pm(pci_device, !!state);
|
|
mutex_unlock(&aspm_lock);
|
|
up_read(&pci_bus_sem);
|
|
|
|
return n;
|
|
}
|
|
|
|
static DEVICE_ATTR(link_state, 0644, link_state_show, link_state_store);
|
|
static DEVICE_ATTR(clk_ctl, 0644, clk_ctl_show, clk_ctl_store);
|
|
|
|
static char power_group[] = "power";
|
|
void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
if (!pdev->is_pcie || (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
|
|
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state)
|
|
return;
|
|
|
|
if (link_state->support_state)
|
|
sysfs_add_file_to_group(&pdev->dev.kobj,
|
|
&dev_attr_link_state.attr, power_group);
|
|
if (link_state->clk_pm_capable)
|
|
sysfs_add_file_to_group(&pdev->dev.kobj,
|
|
&dev_attr_clk_ctl.attr, power_group);
|
|
}
|
|
|
|
void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
if (!pdev->is_pcie || (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
|
|
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state)
|
|
return;
|
|
|
|
if (link_state->support_state)
|
|
sysfs_remove_file_from_group(&pdev->dev.kobj,
|
|
&dev_attr_link_state.attr, power_group);
|
|
if (link_state->clk_pm_capable)
|
|
sysfs_remove_file_from_group(&pdev->dev.kobj,
|
|
&dev_attr_clk_ctl.attr, power_group);
|
|
}
|
|
#endif
|
|
|
|
static int __init pcie_aspm_disable(char *str)
|
|
{
|
|
if (!strcmp(str, "off")) {
|
|
aspm_disabled = 1;
|
|
printk(KERN_INFO "PCIe ASPM is disabled\n");
|
|
} else if (!strcmp(str, "force")) {
|
|
aspm_force = 1;
|
|
printk(KERN_INFO "PCIe ASPM is forcedly enabled\n");
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
__setup("pcie_aspm=", pcie_aspm_disable);
|
|
|
|
void pcie_no_aspm(void)
|
|
{
|
|
if (!aspm_force)
|
|
aspm_disabled = 1;
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
#include <acpi/acpi_bus.h>
|
|
#include <linux/pci-acpi.h>
|
|
static void pcie_aspm_platform_init(void)
|
|
{
|
|
pcie_osc_support_set(OSC_ACTIVE_STATE_PWR_SUPPORT|
|
|
OSC_CLOCK_PWR_CAPABILITY_SUPPORT);
|
|
}
|
|
#else
|
|
static inline void pcie_aspm_platform_init(void) { }
|
|
#endif
|
|
|
|
static int __init pcie_aspm_init(void)
|
|
{
|
|
if (aspm_disabled)
|
|
return 0;
|
|
pcie_aspm_platform_init();
|
|
return 0;
|
|
}
|
|
|
|
fs_initcall(pcie_aspm_init);
|