mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 23:14:31 +08:00
53c8b29abe
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Os1seHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGtx4H/j6i482XzcGFKTBm A7mBoQpy+kLtoUov4EtBAR62OuwI8rsahW9di37QKndPoQrczWaKBmr3De6LCdPe v3pl3O6wBbvH5ru+qBPFX9PdNbDvimEChh7LHxmMxNQq3M+AjZAZVJyfpoiFnx35 Fbge+LZaH/k8HMwZmkMr5t9Mpkip715qKg2o9Bua6dkH0AqlcpLlC8d9a+HIVw/z aAsyGSU8jRwhoAOJsE9bJf0acQ/pZSqmFp0rDKqeFTSDMsbDRKLGq/dgv4nW0RiW s7xqsjb/rdcvirRj3rv9+lcTVkOtEqwk0PVdL9WOf7g4iYrb3SOIZh8ZyViaDSeH VTS5zps= =huBY -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0TWXgTHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0JS1B/oDGe3XnBkiet3oYHSCqAroxTHPEp8O vi5Ad3+oxwKImkiysuO9yftRTN0S9xbnpZw5rCSICZytxuwxWbzNTUTENQaHtX3r 97LHgINoIJhIAai1tWrt6oK3IyerdaqAMDTWJPY5p9cenpWNfuQhuyCC+2lV5lnz Dp2ux9Xk7Xo9Nu5fymucGH+idXRpnh5zjB6Rx3vMF5IKXc0RSZr87tcwuC6OA0Jj y3TCLZ+NPfrFgIbK7pSYEr5dFJX2Y+Os3tahvkYqYbabMDGOsvns/pt4N0ygItTH YsNMhSX45zijE9JdHLgwgN60RTxDCGk1st1djpKKH5jSZH4BoArI0oUs =e7U4 -----END PGP SIGNATURE----- Merge tag 'v5.2-rc6' into asoc-5.3 Linux 5.2-rc6
1939 lines
64 KiB
C
1939 lines
64 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* ALSA SoC TLV320AIC3X codec driver
|
|
*
|
|
* Author: Vladimir Barinov, <vbarinov@embeddedalley.com>
|
|
* Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com>
|
|
*
|
|
* Based on sound/soc/codecs/wm8753.c by Liam Girdwood
|
|
*
|
|
* Notes:
|
|
* The AIC3X is a driver for a low power stereo audio
|
|
* codecs aic31, aic32, aic33, aic3007.
|
|
*
|
|
* It supports full aic33 codec functionality.
|
|
* The compatibility with aic32, aic31 and aic3007 is as follows:
|
|
* aic32/aic3007 | aic31
|
|
* ---------------------------------------
|
|
* MONO_LOUT -> N/A | MONO_LOUT -> N/A
|
|
* | IN1L -> LINE1L
|
|
* | IN1R -> LINE1R
|
|
* | IN2L -> LINE2L
|
|
* | IN2R -> LINE2R
|
|
* | MIC3L/R -> N/A
|
|
* truncated internal functionality in
|
|
* accordance with documentation
|
|
* ---------------------------------------
|
|
*
|
|
* Hence the machine layer should disable unsupported inputs/outputs by
|
|
* snd_soc_dapm_disable_pin(codec, "MONO_LOUT"), etc.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
#include <sound/tlv320aic3x.h>
|
|
|
|
#include "tlv320aic3x.h"
|
|
|
|
#define AIC3X_NUM_SUPPLIES 4
|
|
static const char *aic3x_supply_names[AIC3X_NUM_SUPPLIES] = {
|
|
"IOVDD", /* I/O Voltage */
|
|
"DVDD", /* Digital Core Voltage */
|
|
"AVDD", /* Analog DAC Voltage */
|
|
"DRVDD", /* ADC Analog and Output Driver Voltage */
|
|
};
|
|
|
|
static LIST_HEAD(reset_list);
|
|
|
|
struct aic3x_priv;
|
|
|
|
struct aic3x_disable_nb {
|
|
struct notifier_block nb;
|
|
struct aic3x_priv *aic3x;
|
|
};
|
|
|
|
/* codec private data */
|
|
struct aic3x_priv {
|
|
struct snd_soc_component *component;
|
|
struct regmap *regmap;
|
|
struct regulator_bulk_data supplies[AIC3X_NUM_SUPPLIES];
|
|
struct aic3x_disable_nb disable_nb[AIC3X_NUM_SUPPLIES];
|
|
struct aic3x_setup_data *setup;
|
|
unsigned int sysclk;
|
|
unsigned int dai_fmt;
|
|
unsigned int tdm_delay;
|
|
unsigned int slot_width;
|
|
struct list_head list;
|
|
int master;
|
|
int gpio_reset;
|
|
int power;
|
|
#define AIC3X_MODEL_3X 0
|
|
#define AIC3X_MODEL_33 1
|
|
#define AIC3X_MODEL_3007 2
|
|
#define AIC3X_MODEL_3104 3
|
|
u16 model;
|
|
|
|
/* Selects the micbias voltage */
|
|
enum aic3x_micbias_voltage micbias_vg;
|
|
/* Output Common-Mode Voltage */
|
|
u8 ocmv;
|
|
};
|
|
|
|
static const struct reg_default aic3x_reg[] = {
|
|
{ 0, 0x00 }, { 1, 0x00 }, { 2, 0x00 }, { 3, 0x10 },
|
|
{ 4, 0x04 }, { 5, 0x00 }, { 6, 0x00 }, { 7, 0x00 },
|
|
{ 8, 0x00 }, { 9, 0x00 }, { 10, 0x00 }, { 11, 0x01 },
|
|
{ 12, 0x00 }, { 13, 0x00 }, { 14, 0x00 }, { 15, 0x80 },
|
|
{ 16, 0x80 }, { 17, 0xff }, { 18, 0xff }, { 19, 0x78 },
|
|
{ 20, 0x78 }, { 21, 0x78 }, { 22, 0x78 }, { 23, 0x78 },
|
|
{ 24, 0x78 }, { 25, 0x00 }, { 26, 0x00 }, { 27, 0xfe },
|
|
{ 28, 0x00 }, { 29, 0x00 }, { 30, 0xfe }, { 31, 0x00 },
|
|
{ 32, 0x18 }, { 33, 0x18 }, { 34, 0x00 }, { 35, 0x00 },
|
|
{ 36, 0x00 }, { 37, 0x00 }, { 38, 0x00 }, { 39, 0x00 },
|
|
{ 40, 0x00 }, { 41, 0x00 }, { 42, 0x00 }, { 43, 0x80 },
|
|
{ 44, 0x80 }, { 45, 0x00 }, { 46, 0x00 }, { 47, 0x00 },
|
|
{ 48, 0x00 }, { 49, 0x00 }, { 50, 0x00 }, { 51, 0x04 },
|
|
{ 52, 0x00 }, { 53, 0x00 }, { 54, 0x00 }, { 55, 0x00 },
|
|
{ 56, 0x00 }, { 57, 0x00 }, { 58, 0x04 }, { 59, 0x00 },
|
|
{ 60, 0x00 }, { 61, 0x00 }, { 62, 0x00 }, { 63, 0x00 },
|
|
{ 64, 0x00 }, { 65, 0x04 }, { 66, 0x00 }, { 67, 0x00 },
|
|
{ 68, 0x00 }, { 69, 0x00 }, { 70, 0x00 }, { 71, 0x00 },
|
|
{ 72, 0x04 }, { 73, 0x00 }, { 74, 0x00 }, { 75, 0x00 },
|
|
{ 76, 0x00 }, { 77, 0x00 }, { 78, 0x00 }, { 79, 0x00 },
|
|
{ 80, 0x00 }, { 81, 0x00 }, { 82, 0x00 }, { 83, 0x00 },
|
|
{ 84, 0x00 }, { 85, 0x00 }, { 86, 0x00 }, { 87, 0x00 },
|
|
{ 88, 0x00 }, { 89, 0x00 }, { 90, 0x00 }, { 91, 0x00 },
|
|
{ 92, 0x00 }, { 93, 0x00 }, { 94, 0x00 }, { 95, 0x00 },
|
|
{ 96, 0x00 }, { 97, 0x00 }, { 98, 0x00 }, { 99, 0x00 },
|
|
{ 100, 0x00 }, { 101, 0x00 }, { 102, 0x02 }, { 103, 0x00 },
|
|
{ 104, 0x00 }, { 105, 0x00 }, { 106, 0x00 }, { 107, 0x00 },
|
|
{ 108, 0x00 }, { 109, 0x00 },
|
|
};
|
|
|
|
static bool aic3x_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case AIC3X_RESET:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config aic3x_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = DAC_ICC_ADJ,
|
|
.reg_defaults = aic3x_reg,
|
|
.num_reg_defaults = ARRAY_SIZE(aic3x_reg),
|
|
|
|
.volatile_reg = aic3x_volatile_reg,
|
|
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
#define SOC_DAPM_SINGLE_AIC3X(xname, reg, shift, mask, invert) \
|
|
SOC_SINGLE_EXT(xname, reg, shift, mask, invert, \
|
|
snd_soc_dapm_get_volsw, snd_soc_dapm_put_volsw_aic3x)
|
|
|
|
/*
|
|
* All input lines are connected when !0xf and disconnected with 0xf bit field,
|
|
* so we have to use specific dapm_put call for input mixer
|
|
*/
|
|
static int snd_soc_dapm_put_volsw_aic3x(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_kcontrol_component(kcontrol);
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
struct soc_mixer_control *mc =
|
|
(struct soc_mixer_control *)kcontrol->private_value;
|
|
unsigned int reg = mc->reg;
|
|
unsigned int shift = mc->shift;
|
|
int max = mc->max;
|
|
unsigned int mask = (1 << fls(max)) - 1;
|
|
unsigned int invert = mc->invert;
|
|
unsigned short val;
|
|
struct snd_soc_dapm_update update = {};
|
|
int connect, change;
|
|
|
|
val = (ucontrol->value.integer.value[0] & mask);
|
|
|
|
mask = 0xf;
|
|
if (val)
|
|
val = mask;
|
|
|
|
connect = !!val;
|
|
|
|
if (invert)
|
|
val = mask - val;
|
|
|
|
mask <<= shift;
|
|
val <<= shift;
|
|
|
|
change = snd_soc_component_test_bits(component, reg, mask, val);
|
|
if (change) {
|
|
update.kcontrol = kcontrol;
|
|
update.reg = reg;
|
|
update.mask = mask;
|
|
update.val = val;
|
|
|
|
snd_soc_dapm_mixer_update_power(dapm, kcontrol, connect,
|
|
&update);
|
|
}
|
|
|
|
return change;
|
|
}
|
|
|
|
/*
|
|
* mic bias power on/off share the same register bits with
|
|
* output voltage of mic bias. when power on mic bias, we
|
|
* need reclaim it to voltage value.
|
|
* 0x0 = Powered off
|
|
* 0x1 = MICBIAS output is powered to 2.0V,
|
|
* 0x2 = MICBIAS output is powered to 2.5V
|
|
* 0x3 = MICBIAS output is connected to AVDD
|
|
*/
|
|
static int mic_bias_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_POST_PMU:
|
|
/* change mic bias voltage to user defined */
|
|
snd_soc_component_update_bits(component, MICBIAS_CTRL,
|
|
MICBIAS_LEVEL_MASK,
|
|
aic3x->micbias_vg << MICBIAS_LEVEL_SHIFT);
|
|
break;
|
|
|
|
case SND_SOC_DAPM_PRE_PMD:
|
|
snd_soc_component_update_bits(component, MICBIAS_CTRL,
|
|
MICBIAS_LEVEL_MASK, 0);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const char * const aic3x_left_dac_mux[] = {
|
|
"DAC_L1", "DAC_L3", "DAC_L2" };
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_left_dac_enum, DAC_LINE_MUX, 6,
|
|
aic3x_left_dac_mux);
|
|
|
|
static const char * const aic3x_right_dac_mux[] = {
|
|
"DAC_R1", "DAC_R3", "DAC_R2" };
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_right_dac_enum, DAC_LINE_MUX, 4,
|
|
aic3x_right_dac_mux);
|
|
|
|
static const char * const aic3x_left_hpcom_mux[] = {
|
|
"differential of HPLOUT", "constant VCM", "single-ended" };
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_left_hpcom_enum, HPLCOM_CFG, 4,
|
|
aic3x_left_hpcom_mux);
|
|
|
|
static const char * const aic3x_right_hpcom_mux[] = {
|
|
"differential of HPROUT", "constant VCM", "single-ended",
|
|
"differential of HPLCOM", "external feedback" };
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_right_hpcom_enum, HPRCOM_CFG, 3,
|
|
aic3x_right_hpcom_mux);
|
|
|
|
static const char * const aic3x_linein_mode_mux[] = {
|
|
"single-ended", "differential" };
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_line1l_2_l_enum, LINE1L_2_LADC_CTRL, 7,
|
|
aic3x_linein_mode_mux);
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_line1l_2_r_enum, LINE1L_2_RADC_CTRL, 7,
|
|
aic3x_linein_mode_mux);
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_line1r_2_l_enum, LINE1R_2_LADC_CTRL, 7,
|
|
aic3x_linein_mode_mux);
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_line1r_2_r_enum, LINE1R_2_RADC_CTRL, 7,
|
|
aic3x_linein_mode_mux);
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_line2l_2_ldac_enum, LINE2L_2_LADC_CTRL, 7,
|
|
aic3x_linein_mode_mux);
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_line2r_2_rdac_enum, LINE2R_2_RADC_CTRL, 7,
|
|
aic3x_linein_mode_mux);
|
|
|
|
static const char * const aic3x_adc_hpf[] = {
|
|
"Disabled", "0.0045xFs", "0.0125xFs", "0.025xFs" };
|
|
static SOC_ENUM_DOUBLE_DECL(aic3x_adc_hpf_enum, AIC3X_CODEC_DFILT_CTRL, 6, 4,
|
|
aic3x_adc_hpf);
|
|
|
|
static const char * const aic3x_agc_level[] = {
|
|
"-5.5dB", "-8dB", "-10dB", "-12dB",
|
|
"-14dB", "-17dB", "-20dB", "-24dB" };
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_lagc_level_enum, LAGC_CTRL_A, 4,
|
|
aic3x_agc_level);
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_ragc_level_enum, RAGC_CTRL_A, 4,
|
|
aic3x_agc_level);
|
|
|
|
static const char * const aic3x_agc_attack[] = {
|
|
"8ms", "11ms", "16ms", "20ms" };
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_lagc_attack_enum, LAGC_CTRL_A, 2,
|
|
aic3x_agc_attack);
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_ragc_attack_enum, RAGC_CTRL_A, 2,
|
|
aic3x_agc_attack);
|
|
|
|
static const char * const aic3x_agc_decay[] = {
|
|
"100ms", "200ms", "400ms", "500ms" };
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_lagc_decay_enum, LAGC_CTRL_A, 0,
|
|
aic3x_agc_decay);
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_ragc_decay_enum, RAGC_CTRL_A, 0,
|
|
aic3x_agc_decay);
|
|
|
|
static const char * const aic3x_poweron_time[] = {
|
|
"0us", "10us", "100us", "1ms", "10ms", "50ms",
|
|
"100ms", "200ms", "400ms", "800ms", "2s", "4s" };
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_poweron_time_enum, HPOUT_POP_REDUCTION, 4,
|
|
aic3x_poweron_time);
|
|
|
|
static const char * const aic3x_rampup_step[] = { "0ms", "1ms", "2ms", "4ms" };
|
|
static SOC_ENUM_SINGLE_DECL(aic3x_rampup_step_enum, HPOUT_POP_REDUCTION, 2,
|
|
aic3x_rampup_step);
|
|
|
|
/*
|
|
* DAC digital volumes. From -63.5 to 0 dB in 0.5 dB steps
|
|
*/
|
|
static DECLARE_TLV_DB_SCALE(dac_tlv, -6350, 50, 0);
|
|
/* ADC PGA gain volumes. From 0 to 59.5 dB in 0.5 dB steps */
|
|
static DECLARE_TLV_DB_SCALE(adc_tlv, 0, 50, 0);
|
|
/*
|
|
* Output stage volumes. From -78.3 to 0 dB. Muted below -78.3 dB.
|
|
* Step size is approximately 0.5 dB over most of the scale but increasing
|
|
* near the very low levels.
|
|
* Define dB scale so that it is mostly correct for range about -55 to 0 dB
|
|
* but having increasing dB difference below that (and where it doesn't count
|
|
* so much). This setting shows -50 dB (actual is -50.3 dB) for register
|
|
* value 100 and -58.5 dB (actual is -78.3 dB) for register value 117.
|
|
*/
|
|
static DECLARE_TLV_DB_SCALE(output_stage_tlv, -5900, 50, 1);
|
|
|
|
/* Output volumes. From 0 to 9 dB in 1 dB steps */
|
|
static const DECLARE_TLV_DB_SCALE(out_tlv, 0, 100, 0);
|
|
|
|
static const struct snd_kcontrol_new aic3x_snd_controls[] = {
|
|
/* Output */
|
|
SOC_DOUBLE_R_TLV("PCM Playback Volume",
|
|
LDAC_VOL, RDAC_VOL, 0, 0x7f, 1, dac_tlv),
|
|
|
|
/*
|
|
* Output controls that map to output mixer switches. Note these are
|
|
* only for swapped L-to-R and R-to-L routes. See below stereo controls
|
|
* for direct L-to-L and R-to-R routes.
|
|
*/
|
|
SOC_SINGLE_TLV("Left Line Mixer PGAR Bypass Volume",
|
|
PGAR_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("Left Line Mixer DACR1 Playback Volume",
|
|
DACR1_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_SINGLE_TLV("Right Line Mixer PGAL Bypass Volume",
|
|
PGAL_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("Right Line Mixer DACL1 Playback Volume",
|
|
DACL1_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_SINGLE_TLV("Left HP Mixer PGAR Bypass Volume",
|
|
PGAR_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("Left HP Mixer DACR1 Playback Volume",
|
|
DACR1_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_SINGLE_TLV("Right HP Mixer PGAL Bypass Volume",
|
|
PGAL_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("Right HP Mixer DACL1 Playback Volume",
|
|
DACL1_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_SINGLE_TLV("Left HPCOM Mixer PGAR Bypass Volume",
|
|
PGAR_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("Left HPCOM Mixer DACR1 Playback Volume",
|
|
DACR1_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_SINGLE_TLV("Right HPCOM Mixer PGAL Bypass Volume",
|
|
PGAL_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("Right HPCOM Mixer DACL1 Playback Volume",
|
|
DACL1_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
/* Stereo output controls for direct L-to-L and R-to-R routes */
|
|
SOC_DOUBLE_R_TLV("Line PGA Bypass Volume",
|
|
PGAL_2_LLOPM_VOL, PGAR_2_RLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("Line DAC Playback Volume",
|
|
DACL1_2_LLOPM_VOL, DACR1_2_RLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("HP PGA Bypass Volume",
|
|
PGAL_2_HPLOUT_VOL, PGAR_2_HPROUT_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("HP DAC Playback Volume",
|
|
DACL1_2_HPLOUT_VOL, DACR1_2_HPROUT_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("HPCOM PGA Bypass Volume",
|
|
PGAL_2_HPLCOM_VOL, PGAR_2_HPRCOM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("HPCOM DAC Playback Volume",
|
|
DACL1_2_HPLCOM_VOL, DACR1_2_HPRCOM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
/* Output pin controls */
|
|
SOC_DOUBLE_R_TLV("Line Playback Volume", LLOPM_CTRL, RLOPM_CTRL, 4,
|
|
9, 0, out_tlv),
|
|
SOC_DOUBLE_R("Line Playback Switch", LLOPM_CTRL, RLOPM_CTRL, 3,
|
|
0x01, 0),
|
|
SOC_DOUBLE_R_TLV("HP Playback Volume", HPLOUT_CTRL, HPROUT_CTRL, 4,
|
|
9, 0, out_tlv),
|
|
SOC_DOUBLE_R("HP Playback Switch", HPLOUT_CTRL, HPROUT_CTRL, 3,
|
|
0x01, 0),
|
|
SOC_DOUBLE_R_TLV("HPCOM Playback Volume", HPLCOM_CTRL, HPRCOM_CTRL,
|
|
4, 9, 0, out_tlv),
|
|
SOC_DOUBLE_R("HPCOM Playback Switch", HPLCOM_CTRL, HPRCOM_CTRL, 3,
|
|
0x01, 0),
|
|
|
|
/*
|
|
* Note: enable Automatic input Gain Controller with care. It can
|
|
* adjust PGA to max value when ADC is on and will never go back.
|
|
*/
|
|
SOC_DOUBLE_R("AGC Switch", LAGC_CTRL_A, RAGC_CTRL_A, 7, 0x01, 0),
|
|
SOC_ENUM("Left AGC Target level", aic3x_lagc_level_enum),
|
|
SOC_ENUM("Right AGC Target level", aic3x_ragc_level_enum),
|
|
SOC_ENUM("Left AGC Attack time", aic3x_lagc_attack_enum),
|
|
SOC_ENUM("Right AGC Attack time", aic3x_ragc_attack_enum),
|
|
SOC_ENUM("Left AGC Decay time", aic3x_lagc_decay_enum),
|
|
SOC_ENUM("Right AGC Decay time", aic3x_ragc_decay_enum),
|
|
|
|
/* De-emphasis */
|
|
SOC_DOUBLE("De-emphasis Switch", AIC3X_CODEC_DFILT_CTRL, 2, 0, 0x01, 0),
|
|
|
|
/* Input */
|
|
SOC_DOUBLE_R_TLV("PGA Capture Volume", LADC_VOL, RADC_VOL,
|
|
0, 119, 0, adc_tlv),
|
|
SOC_DOUBLE_R("PGA Capture Switch", LADC_VOL, RADC_VOL, 7, 0x01, 1),
|
|
|
|
SOC_ENUM("ADC HPF Cut-off", aic3x_adc_hpf_enum),
|
|
|
|
/* Pop reduction */
|
|
SOC_ENUM("Output Driver Power-On time", aic3x_poweron_time_enum),
|
|
SOC_ENUM("Output Driver Ramp-up step", aic3x_rampup_step_enum),
|
|
};
|
|
|
|
/* For other than tlv320aic3104 */
|
|
static const struct snd_kcontrol_new aic3x_extra_snd_controls[] = {
|
|
/*
|
|
* Output controls that map to output mixer switches. Note these are
|
|
* only for swapped L-to-R and R-to-L routes. See below stereo controls
|
|
* for direct L-to-L and R-to-R routes.
|
|
*/
|
|
SOC_SINGLE_TLV("Left Line Mixer Line2R Bypass Volume",
|
|
LINE2R_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_SINGLE_TLV("Right Line Mixer Line2L Bypass Volume",
|
|
LINE2L_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_SINGLE_TLV("Left HP Mixer Line2R Bypass Volume",
|
|
LINE2R_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_SINGLE_TLV("Right HP Mixer Line2L Bypass Volume",
|
|
LINE2L_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_SINGLE_TLV("Left HPCOM Mixer Line2R Bypass Volume",
|
|
LINE2R_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_SINGLE_TLV("Right HPCOM Mixer Line2L Bypass Volume",
|
|
LINE2L_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv),
|
|
|
|
/* Stereo output controls for direct L-to-L and R-to-R routes */
|
|
SOC_DOUBLE_R_TLV("Line Line2 Bypass Volume",
|
|
LINE2L_2_LLOPM_VOL, LINE2R_2_RLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("HP Line2 Bypass Volume",
|
|
LINE2L_2_HPLOUT_VOL, LINE2R_2_HPROUT_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("HPCOM Line2 Bypass Volume",
|
|
LINE2L_2_HPLCOM_VOL, LINE2R_2_HPRCOM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new aic3x_mono_controls[] = {
|
|
SOC_DOUBLE_R_TLV("Mono Line2 Bypass Volume",
|
|
LINE2L_2_MONOLOPM_VOL, LINE2R_2_MONOLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("Mono PGA Bypass Volume",
|
|
PGAL_2_MONOLOPM_VOL, PGAR_2_MONOLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("Mono DAC Playback Volume",
|
|
DACL1_2_MONOLOPM_VOL, DACR1_2_MONOLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_SINGLE("Mono Playback Switch", MONOLOPM_CTRL, 3, 0x01, 0),
|
|
SOC_SINGLE_TLV("Mono Playback Volume", MONOLOPM_CTRL, 4, 9, 0,
|
|
out_tlv),
|
|
|
|
};
|
|
|
|
/*
|
|
* Class-D amplifier gain. From 0 to 18 dB in 6 dB steps
|
|
*/
|
|
static DECLARE_TLV_DB_SCALE(classd_amp_tlv, 0, 600, 0);
|
|
|
|
static const struct snd_kcontrol_new aic3x_classd_amp_gain_ctrl =
|
|
SOC_DOUBLE_TLV("Class-D Playback Volume", CLASSD_CTRL, 6, 4, 3, 0, classd_amp_tlv);
|
|
|
|
/* Left DAC Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_dac_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_left_dac_enum);
|
|
|
|
/* Right DAC Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_dac_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_right_dac_enum);
|
|
|
|
/* Left HPCOM Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_hpcom_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_left_hpcom_enum);
|
|
|
|
/* Right HPCOM Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_hpcom_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_right_hpcom_enum);
|
|
|
|
/* Left Line Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_line_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_LLOPM_VOL, 7, 1, 0),
|
|
/* Not on tlv320aic3104 */
|
|
SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_LLOPM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Right Line Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_line_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_RLOPM_VOL, 7, 1, 0),
|
|
/* Not on tlv320aic3104 */
|
|
SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_RLOPM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Mono Mixer */
|
|
static const struct snd_kcontrol_new aic3x_mono_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_MONOLOPM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Left HP Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_hp_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPLOUT_VOL, 7, 1, 0),
|
|
/* Not on tlv320aic3104 */
|
|
SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPLOUT_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Right HP Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_hp_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPROUT_VOL, 7, 1, 0),
|
|
/* Not on tlv320aic3104 */
|
|
SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPROUT_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Left HPCOM Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_hpcom_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPLCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPLCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPLCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPLCOM_VOL, 7, 1, 0),
|
|
/* Not on tlv320aic3104 */
|
|
SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPLCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPLCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Right HPCOM Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_hpcom_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPRCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPRCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPRCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPRCOM_VOL, 7, 1, 0),
|
|
/* Not on tlv320aic3104 */
|
|
SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPRCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPRCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Left PGA Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_pga_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_LADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_LADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line2L Switch", LINE2L_2_LADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_LADC_CTRL, 4, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_LADC_CTRL, 0, 1, 1),
|
|
};
|
|
|
|
/* Right PGA Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_pga_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_RADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_RADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line2R Switch", LINE2R_2_RADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_RADC_CTRL, 4, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_RADC_CTRL, 0, 1, 1),
|
|
};
|
|
|
|
/* Left PGA Mixer for tlv320aic3104 */
|
|
static const struct snd_kcontrol_new aic3104_left_pga_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_LADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_LADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic2L Switch", MIC3LR_2_LADC_CTRL, 4, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic2R Switch", MIC3LR_2_LADC_CTRL, 0, 1, 1),
|
|
};
|
|
|
|
/* Right PGA Mixer for tlv320aic3104 */
|
|
static const struct snd_kcontrol_new aic3104_right_pga_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_RADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_RADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic2L Switch", MIC3LR_2_RADC_CTRL, 4, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic2R Switch", MIC3LR_2_RADC_CTRL, 0, 1, 1),
|
|
};
|
|
|
|
/* Left Line1 Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_line1l_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_line1l_2_l_enum);
|
|
static const struct snd_kcontrol_new aic3x_right_line1l_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_line1l_2_r_enum);
|
|
|
|
/* Right Line1 Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_line1r_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_line1r_2_r_enum);
|
|
static const struct snd_kcontrol_new aic3x_left_line1r_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_line1r_2_l_enum);
|
|
|
|
/* Left Line2 Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_line2_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_line2l_2_ldac_enum);
|
|
|
|
/* Right Line2 Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_line2_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_line2r_2_rdac_enum);
|
|
|
|
static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
|
|
/* Left DAC to Left Outputs */
|
|
SND_SOC_DAPM_DAC("Left DAC", "Left Playback", DAC_PWR, 7, 0),
|
|
SND_SOC_DAPM_MUX("Left DAC Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_dac_mux_controls),
|
|
SND_SOC_DAPM_MUX("Left HPCOM Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_hpcom_mux_controls),
|
|
SND_SOC_DAPM_PGA("Left Line Out", LLOPM_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Left HP Out", HPLOUT_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Left HP Com", HPLCOM_CTRL, 0, 0, NULL, 0),
|
|
|
|
/* Right DAC to Right Outputs */
|
|
SND_SOC_DAPM_DAC("Right DAC", "Right Playback", DAC_PWR, 6, 0),
|
|
SND_SOC_DAPM_MUX("Right DAC Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_dac_mux_controls),
|
|
SND_SOC_DAPM_MUX("Right HPCOM Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_hpcom_mux_controls),
|
|
SND_SOC_DAPM_PGA("Right Line Out", RLOPM_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right HP Out", HPROUT_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right HP Com", HPRCOM_CTRL, 0, 0, NULL, 0),
|
|
|
|
/* Inputs to Left ADC */
|
|
SND_SOC_DAPM_ADC("Left ADC", "Left Capture", LINE1L_2_LADC_CTRL, 2, 0),
|
|
SND_SOC_DAPM_MUX("Left Line1L Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line1l_mux_controls),
|
|
SND_SOC_DAPM_MUX("Left Line1R Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line1r_mux_controls),
|
|
|
|
/* Inputs to Right ADC */
|
|
SND_SOC_DAPM_ADC("Right ADC", "Right Capture",
|
|
LINE1R_2_RADC_CTRL, 2, 0),
|
|
SND_SOC_DAPM_MUX("Right Line1L Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line1l_mux_controls),
|
|
SND_SOC_DAPM_MUX("Right Line1R Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line1r_mux_controls),
|
|
|
|
/* Mic Bias */
|
|
SND_SOC_DAPM_SUPPLY("Mic Bias", MICBIAS_CTRL, 6, 0,
|
|
mic_bias_event,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
|
|
SND_SOC_DAPM_OUTPUT("LLOUT"),
|
|
SND_SOC_DAPM_OUTPUT("RLOUT"),
|
|
SND_SOC_DAPM_OUTPUT("HPLOUT"),
|
|
SND_SOC_DAPM_OUTPUT("HPROUT"),
|
|
SND_SOC_DAPM_OUTPUT("HPLCOM"),
|
|
SND_SOC_DAPM_OUTPUT("HPRCOM"),
|
|
|
|
SND_SOC_DAPM_INPUT("LINE1L"),
|
|
SND_SOC_DAPM_INPUT("LINE1R"),
|
|
|
|
/*
|
|
* Virtual output pin to detection block inside codec. This can be
|
|
* used to keep codec bias on if gpio or detection features are needed.
|
|
* Force pin on or construct a path with an input jack and mic bias
|
|
* widgets.
|
|
*/
|
|
SND_SOC_DAPM_OUTPUT("Detection"),
|
|
};
|
|
|
|
/* For other than tlv320aic3104 */
|
|
static const struct snd_soc_dapm_widget aic3x_extra_dapm_widgets[] = {
|
|
/* Inputs to Left ADC */
|
|
SND_SOC_DAPM_MIXER("Left PGA Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_pga_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_pga_mixer_controls)),
|
|
SND_SOC_DAPM_MUX("Left Line2L Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line2_mux_controls),
|
|
|
|
/* Inputs to Right ADC */
|
|
SND_SOC_DAPM_MIXER("Right PGA Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_pga_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_pga_mixer_controls)),
|
|
SND_SOC_DAPM_MUX("Right Line2R Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line2_mux_controls),
|
|
|
|
/*
|
|
* Not a real mic bias widget but similar function. This is for dynamic
|
|
* control of GPIO1 digital mic modulator clock output function when
|
|
* using digital mic.
|
|
*/
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "GPIO1 dmic modclk",
|
|
AIC3X_GPIO1_REG, 4, 0xf,
|
|
AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK,
|
|
AIC3X_GPIO1_FUNC_DISABLED),
|
|
|
|
/*
|
|
* Also similar function like mic bias. Selects digital mic with
|
|
* configurable oversampling rate instead of ADC converter.
|
|
*/
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 128",
|
|
AIC3X_ASD_INTF_CTRLA, 0, 3, 1, 0),
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 64",
|
|
AIC3X_ASD_INTF_CTRLA, 0, 3, 2, 0),
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 32",
|
|
AIC3X_ASD_INTF_CTRLA, 0, 3, 3, 0),
|
|
|
|
/* Output mixers */
|
|
SND_SOC_DAPM_MIXER("Left Line Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_line_mixer_controls)),
|
|
SND_SOC_DAPM_MIXER("Right Line Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_line_mixer_controls)),
|
|
SND_SOC_DAPM_MIXER("Left HP Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_hp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_hp_mixer_controls)),
|
|
SND_SOC_DAPM_MIXER("Right HP Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_hp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_hp_mixer_controls)),
|
|
SND_SOC_DAPM_MIXER("Left HPCOM Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_hpcom_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_hpcom_mixer_controls)),
|
|
SND_SOC_DAPM_MIXER("Right HPCOM Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_hpcom_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_hpcom_mixer_controls)),
|
|
|
|
SND_SOC_DAPM_INPUT("MIC3L"),
|
|
SND_SOC_DAPM_INPUT("MIC3R"),
|
|
SND_SOC_DAPM_INPUT("LINE2L"),
|
|
SND_SOC_DAPM_INPUT("LINE2R"),
|
|
};
|
|
|
|
/* For tlv320aic3104 */
|
|
static const struct snd_soc_dapm_widget aic3104_extra_dapm_widgets[] = {
|
|
/* Inputs to Left ADC */
|
|
SND_SOC_DAPM_MIXER("Left PGA Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3104_left_pga_mixer_controls[0],
|
|
ARRAY_SIZE(aic3104_left_pga_mixer_controls)),
|
|
|
|
/* Inputs to Right ADC */
|
|
SND_SOC_DAPM_MIXER("Right PGA Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3104_right_pga_mixer_controls[0],
|
|
ARRAY_SIZE(aic3104_right_pga_mixer_controls)),
|
|
|
|
/* Output mixers */
|
|
SND_SOC_DAPM_MIXER("Left Line Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_line_mixer_controls) - 2),
|
|
SND_SOC_DAPM_MIXER("Right Line Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_line_mixer_controls) - 2),
|
|
SND_SOC_DAPM_MIXER("Left HP Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_hp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_hp_mixer_controls) - 2),
|
|
SND_SOC_DAPM_MIXER("Right HP Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_hp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_hp_mixer_controls) - 2),
|
|
SND_SOC_DAPM_MIXER("Left HPCOM Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_hpcom_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_hpcom_mixer_controls) - 2),
|
|
SND_SOC_DAPM_MIXER("Right HPCOM Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_hpcom_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_hpcom_mixer_controls) - 2),
|
|
|
|
SND_SOC_DAPM_INPUT("MIC2L"),
|
|
SND_SOC_DAPM_INPUT("MIC2R"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget aic3x_dapm_mono_widgets[] = {
|
|
/* Mono Output */
|
|
SND_SOC_DAPM_PGA("Mono Out", MONOLOPM_CTRL, 0, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_MIXER("Mono Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_mono_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_mono_mixer_controls)),
|
|
|
|
SND_SOC_DAPM_OUTPUT("MONO_LOUT"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget aic3007_dapm_widgets[] = {
|
|
/* Class-D outputs */
|
|
SND_SOC_DAPM_PGA("Left Class-D Out", CLASSD_CTRL, 3, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right Class-D Out", CLASSD_CTRL, 2, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_OUTPUT("SPOP"),
|
|
SND_SOC_DAPM_OUTPUT("SPOM"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route intercon[] = {
|
|
/* Left Input */
|
|
{"Left Line1L Mux", "single-ended", "LINE1L"},
|
|
{"Left Line1L Mux", "differential", "LINE1L"},
|
|
{"Left Line1R Mux", "single-ended", "LINE1R"},
|
|
{"Left Line1R Mux", "differential", "LINE1R"},
|
|
|
|
{"Left PGA Mixer", "Line1L Switch", "Left Line1L Mux"},
|
|
{"Left PGA Mixer", "Line1R Switch", "Left Line1R Mux"},
|
|
|
|
{"Left ADC", NULL, "Left PGA Mixer"},
|
|
|
|
/* Right Input */
|
|
{"Right Line1R Mux", "single-ended", "LINE1R"},
|
|
{"Right Line1R Mux", "differential", "LINE1R"},
|
|
{"Right Line1L Mux", "single-ended", "LINE1L"},
|
|
{"Right Line1L Mux", "differential", "LINE1L"},
|
|
|
|
{"Right PGA Mixer", "Line1L Switch", "Right Line1L Mux"},
|
|
{"Right PGA Mixer", "Line1R Switch", "Right Line1R Mux"},
|
|
|
|
{"Right ADC", NULL, "Right PGA Mixer"},
|
|
|
|
/* Left DAC Output */
|
|
{"Left DAC Mux", "DAC_L1", "Left DAC"},
|
|
{"Left DAC Mux", "DAC_L2", "Left DAC"},
|
|
{"Left DAC Mux", "DAC_L3", "Left DAC"},
|
|
|
|
/* Right DAC Output */
|
|
{"Right DAC Mux", "DAC_R1", "Right DAC"},
|
|
{"Right DAC Mux", "DAC_R2", "Right DAC"},
|
|
{"Right DAC Mux", "DAC_R3", "Right DAC"},
|
|
|
|
/* Left Line Output */
|
|
{"Left Line Mixer", "PGAL Bypass Switch", "Left PGA Mixer"},
|
|
{"Left Line Mixer", "DACL1 Switch", "Left DAC Mux"},
|
|
{"Left Line Mixer", "PGAR Bypass Switch", "Right PGA Mixer"},
|
|
{"Left Line Mixer", "DACR1 Switch", "Right DAC Mux"},
|
|
|
|
{"Left Line Out", NULL, "Left Line Mixer"},
|
|
{"Left Line Out", NULL, "Left DAC Mux"},
|
|
{"LLOUT", NULL, "Left Line Out"},
|
|
|
|
/* Right Line Output */
|
|
{"Right Line Mixer", "PGAL Bypass Switch", "Left PGA Mixer"},
|
|
{"Right Line Mixer", "DACL1 Switch", "Left DAC Mux"},
|
|
{"Right Line Mixer", "PGAR Bypass Switch", "Right PGA Mixer"},
|
|
{"Right Line Mixer", "DACR1 Switch", "Right DAC Mux"},
|
|
|
|
{"Right Line Out", NULL, "Right Line Mixer"},
|
|
{"Right Line Out", NULL, "Right DAC Mux"},
|
|
{"RLOUT", NULL, "Right Line Out"},
|
|
|
|
/* Left HP Output */
|
|
{"Left HP Mixer", "PGAL Bypass Switch", "Left PGA Mixer"},
|
|
{"Left HP Mixer", "DACL1 Switch", "Left DAC Mux"},
|
|
{"Left HP Mixer", "PGAR Bypass Switch", "Right PGA Mixer"},
|
|
{"Left HP Mixer", "DACR1 Switch", "Right DAC Mux"},
|
|
|
|
{"Left HP Out", NULL, "Left HP Mixer"},
|
|
{"Left HP Out", NULL, "Left DAC Mux"},
|
|
{"HPLOUT", NULL, "Left HP Out"},
|
|
|
|
/* Right HP Output */
|
|
{"Right HP Mixer", "PGAL Bypass Switch", "Left PGA Mixer"},
|
|
{"Right HP Mixer", "DACL1 Switch", "Left DAC Mux"},
|
|
{"Right HP Mixer", "PGAR Bypass Switch", "Right PGA Mixer"},
|
|
{"Right HP Mixer", "DACR1 Switch", "Right DAC Mux"},
|
|
|
|
{"Right HP Out", NULL, "Right HP Mixer"},
|
|
{"Right HP Out", NULL, "Right DAC Mux"},
|
|
{"HPROUT", NULL, "Right HP Out"},
|
|
|
|
/* Left HPCOM Output */
|
|
{"Left HPCOM Mixer", "PGAL Bypass Switch", "Left PGA Mixer"},
|
|
{"Left HPCOM Mixer", "DACL1 Switch", "Left DAC Mux"},
|
|
{"Left HPCOM Mixer", "PGAR Bypass Switch", "Right PGA Mixer"},
|
|
{"Left HPCOM Mixer", "DACR1 Switch", "Right DAC Mux"},
|
|
|
|
{"Left HPCOM Mux", "differential of HPLOUT", "Left HP Mixer"},
|
|
{"Left HPCOM Mux", "constant VCM", "Left HPCOM Mixer"},
|
|
{"Left HPCOM Mux", "single-ended", "Left HPCOM Mixer"},
|
|
{"Left HP Com", NULL, "Left HPCOM Mux"},
|
|
{"HPLCOM", NULL, "Left HP Com"},
|
|
|
|
/* Right HPCOM Output */
|
|
{"Right HPCOM Mixer", "PGAL Bypass Switch", "Left PGA Mixer"},
|
|
{"Right HPCOM Mixer", "DACL1 Switch", "Left DAC Mux"},
|
|
{"Right HPCOM Mixer", "PGAR Bypass Switch", "Right PGA Mixer"},
|
|
{"Right HPCOM Mixer", "DACR1 Switch", "Right DAC Mux"},
|
|
|
|
{"Right HPCOM Mux", "differential of HPROUT", "Right HP Mixer"},
|
|
{"Right HPCOM Mux", "constant VCM", "Right HPCOM Mixer"},
|
|
{"Right HPCOM Mux", "single-ended", "Right HPCOM Mixer"},
|
|
{"Right HPCOM Mux", "differential of HPLCOM", "Left HPCOM Mixer"},
|
|
{"Right HPCOM Mux", "external feedback", "Right HPCOM Mixer"},
|
|
{"Right HP Com", NULL, "Right HPCOM Mux"},
|
|
{"HPRCOM", NULL, "Right HP Com"},
|
|
};
|
|
|
|
/* For other than tlv320aic3104 */
|
|
static const struct snd_soc_dapm_route intercon_extra[] = {
|
|
/* Left Input */
|
|
{"Left Line2L Mux", "single-ended", "LINE2L"},
|
|
{"Left Line2L Mux", "differential", "LINE2L"},
|
|
|
|
{"Left PGA Mixer", "Line2L Switch", "Left Line2L Mux"},
|
|
{"Left PGA Mixer", "Mic3L Switch", "MIC3L"},
|
|
{"Left PGA Mixer", "Mic3R Switch", "MIC3R"},
|
|
|
|
{"Left ADC", NULL, "GPIO1 dmic modclk"},
|
|
|
|
/* Right Input */
|
|
{"Right Line2R Mux", "single-ended", "LINE2R"},
|
|
{"Right Line2R Mux", "differential", "LINE2R"},
|
|
|
|
{"Right PGA Mixer", "Line2R Switch", "Right Line2R Mux"},
|
|
{"Right PGA Mixer", "Mic3L Switch", "MIC3L"},
|
|
{"Right PGA Mixer", "Mic3R Switch", "MIC3R"},
|
|
|
|
{"Right ADC", NULL, "GPIO1 dmic modclk"},
|
|
|
|
/*
|
|
* Logical path between digital mic enable and GPIO1 modulator clock
|
|
* output function
|
|
*/
|
|
{"GPIO1 dmic modclk", NULL, "DMic Rate 128"},
|
|
{"GPIO1 dmic modclk", NULL, "DMic Rate 64"},
|
|
{"GPIO1 dmic modclk", NULL, "DMic Rate 32"},
|
|
|
|
/* Left Line Output */
|
|
{"Left Line Mixer", "Line2L Bypass Switch", "Left Line2L Mux"},
|
|
{"Left Line Mixer", "Line2R Bypass Switch", "Right Line2R Mux"},
|
|
|
|
/* Right Line Output */
|
|
{"Right Line Mixer", "Line2L Bypass Switch", "Left Line2L Mux"},
|
|
{"Right Line Mixer", "Line2R Bypass Switch", "Right Line2R Mux"},
|
|
|
|
/* Left HP Output */
|
|
{"Left HP Mixer", "Line2L Bypass Switch", "Left Line2L Mux"},
|
|
{"Left HP Mixer", "Line2R Bypass Switch", "Right Line2R Mux"},
|
|
|
|
/* Right HP Output */
|
|
{"Right HP Mixer", "Line2L Bypass Switch", "Left Line2L Mux"},
|
|
{"Right HP Mixer", "Line2R Bypass Switch", "Right Line2R Mux"},
|
|
|
|
/* Left HPCOM Output */
|
|
{"Left HPCOM Mixer", "Line2L Bypass Switch", "Left Line2L Mux"},
|
|
{"Left HPCOM Mixer", "Line2R Bypass Switch", "Right Line2R Mux"},
|
|
|
|
/* Right HPCOM Output */
|
|
{"Right HPCOM Mixer", "Line2L Bypass Switch", "Left Line2L Mux"},
|
|
{"Right HPCOM Mixer", "Line2R Bypass Switch", "Right Line2R Mux"},
|
|
};
|
|
|
|
/* For tlv320aic3104 */
|
|
static const struct snd_soc_dapm_route intercon_extra_3104[] = {
|
|
/* Left Input */
|
|
{"Left PGA Mixer", "Mic2L Switch", "MIC2L"},
|
|
{"Left PGA Mixer", "Mic2R Switch", "MIC2R"},
|
|
|
|
/* Right Input */
|
|
{"Right PGA Mixer", "Mic2L Switch", "MIC2L"},
|
|
{"Right PGA Mixer", "Mic2R Switch", "MIC2R"},
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route intercon_mono[] = {
|
|
/* Mono Output */
|
|
{"Mono Mixer", "Line2L Bypass Switch", "Left Line2L Mux"},
|
|
{"Mono Mixer", "PGAL Bypass Switch", "Left PGA Mixer"},
|
|
{"Mono Mixer", "DACL1 Switch", "Left DAC Mux"},
|
|
{"Mono Mixer", "Line2R Bypass Switch", "Right Line2R Mux"},
|
|
{"Mono Mixer", "PGAR Bypass Switch", "Right PGA Mixer"},
|
|
{"Mono Mixer", "DACR1 Switch", "Right DAC Mux"},
|
|
{"Mono Out", NULL, "Mono Mixer"},
|
|
{"MONO_LOUT", NULL, "Mono Out"},
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route intercon_3007[] = {
|
|
/* Class-D outputs */
|
|
{"Left Class-D Out", NULL, "Left Line Out"},
|
|
{"Right Class-D Out", NULL, "Left Line Out"},
|
|
{"SPOP", NULL, "Left Class-D Out"},
|
|
{"SPOM", NULL, "Right Class-D Out"},
|
|
};
|
|
|
|
static int aic3x_add_widgets(struct snd_soc_component *component)
|
|
{
|
|
struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
|
|
switch (aic3x->model) {
|
|
case AIC3X_MODEL_3X:
|
|
case AIC3X_MODEL_33:
|
|
snd_soc_dapm_new_controls(dapm, aic3x_extra_dapm_widgets,
|
|
ARRAY_SIZE(aic3x_extra_dapm_widgets));
|
|
snd_soc_dapm_add_routes(dapm, intercon_extra,
|
|
ARRAY_SIZE(intercon_extra));
|
|
snd_soc_dapm_new_controls(dapm, aic3x_dapm_mono_widgets,
|
|
ARRAY_SIZE(aic3x_dapm_mono_widgets));
|
|
snd_soc_dapm_add_routes(dapm, intercon_mono,
|
|
ARRAY_SIZE(intercon_mono));
|
|
break;
|
|
case AIC3X_MODEL_3007:
|
|
snd_soc_dapm_new_controls(dapm, aic3x_extra_dapm_widgets,
|
|
ARRAY_SIZE(aic3x_extra_dapm_widgets));
|
|
snd_soc_dapm_add_routes(dapm, intercon_extra,
|
|
ARRAY_SIZE(intercon_extra));
|
|
snd_soc_dapm_new_controls(dapm, aic3007_dapm_widgets,
|
|
ARRAY_SIZE(aic3007_dapm_widgets));
|
|
snd_soc_dapm_add_routes(dapm, intercon_3007,
|
|
ARRAY_SIZE(intercon_3007));
|
|
break;
|
|
case AIC3X_MODEL_3104:
|
|
snd_soc_dapm_new_controls(dapm, aic3104_extra_dapm_widgets,
|
|
ARRAY_SIZE(aic3104_extra_dapm_widgets));
|
|
snd_soc_dapm_add_routes(dapm, intercon_extra_3104,
|
|
ARRAY_SIZE(intercon_extra_3104));
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
|
|
int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0;
|
|
u8 data, j, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1;
|
|
u16 d, pll_d = 1;
|
|
int clk;
|
|
int width = aic3x->slot_width;
|
|
|
|
if (!width)
|
|
width = params_width(params);
|
|
|
|
/* select data word length */
|
|
data = snd_soc_component_read32(component, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4));
|
|
switch (width) {
|
|
case 16:
|
|
break;
|
|
case 20:
|
|
data |= (0x01 << 4);
|
|
break;
|
|
case 24:
|
|
data |= (0x02 << 4);
|
|
break;
|
|
case 32:
|
|
data |= (0x03 << 4);
|
|
break;
|
|
}
|
|
snd_soc_component_write(component, AIC3X_ASD_INTF_CTRLB, data);
|
|
|
|
/* Fsref can be 44100 or 48000 */
|
|
fsref = (params_rate(params) % 11025 == 0) ? 44100 : 48000;
|
|
|
|
/* Try to find a value for Q which allows us to bypass the PLL and
|
|
* generate CODEC_CLK directly. */
|
|
for (pll_q = 2; pll_q < 18; pll_q++)
|
|
if (aic3x->sysclk / (128 * pll_q) == fsref) {
|
|
bypass_pll = 1;
|
|
break;
|
|
}
|
|
|
|
if (bypass_pll) {
|
|
pll_q &= 0xf;
|
|
snd_soc_component_write(component, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT);
|
|
snd_soc_component_write(component, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV);
|
|
/* disable PLL if it is bypassed */
|
|
snd_soc_component_update_bits(component, AIC3X_PLL_PROGA_REG, PLL_ENABLE, 0);
|
|
|
|
} else {
|
|
snd_soc_component_write(component, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV);
|
|
/* enable PLL when it is used */
|
|
snd_soc_component_update_bits(component, AIC3X_PLL_PROGA_REG,
|
|
PLL_ENABLE, PLL_ENABLE);
|
|
}
|
|
|
|
/* Route Left DAC to left channel input and
|
|
* right DAC to right channel input */
|
|
data = (LDAC2LCH | RDAC2RCH);
|
|
data |= (fsref == 44100) ? FSREF_44100 : FSREF_48000;
|
|
if (params_rate(params) >= 64000)
|
|
data |= DUAL_RATE_MODE;
|
|
snd_soc_component_write(component, AIC3X_CODEC_DATAPATH_REG, data);
|
|
|
|
/* codec sample rate select */
|
|
data = (fsref * 20) / params_rate(params);
|
|
if (params_rate(params) < 64000)
|
|
data /= 2;
|
|
data /= 5;
|
|
data -= 2;
|
|
data |= (data << 4);
|
|
snd_soc_component_write(component, AIC3X_SAMPLE_RATE_SEL_REG, data);
|
|
|
|
if (bypass_pll)
|
|
return 0;
|
|
|
|
/* Use PLL, compute appropriate setup for j, d, r and p, the closest
|
|
* one wins the game. Try with d==0 first, next with d!=0.
|
|
* Constraints for j are according to the datasheet.
|
|
* The sysclk is divided by 1000 to prevent integer overflows.
|
|
*/
|
|
|
|
codec_clk = (2048 * fsref) / (aic3x->sysclk / 1000);
|
|
|
|
for (r = 1; r <= 16; r++)
|
|
for (p = 1; p <= 8; p++) {
|
|
for (j = 4; j <= 55; j++) {
|
|
/* This is actually 1000*((j+(d/10000))*r)/p
|
|
* The term had to be converted to get
|
|
* rid of the division by 10000; d = 0 here
|
|
*/
|
|
int tmp_clk = (1000 * j * r) / p;
|
|
|
|
/* Check whether this values get closer than
|
|
* the best ones we had before
|
|
*/
|
|
if (abs(codec_clk - tmp_clk) <
|
|
abs(codec_clk - last_clk)) {
|
|
pll_j = j; pll_d = 0;
|
|
pll_r = r; pll_p = p;
|
|
last_clk = tmp_clk;
|
|
}
|
|
|
|
/* Early exit for exact matches */
|
|
if (tmp_clk == codec_clk)
|
|
goto found;
|
|
}
|
|
}
|
|
|
|
/* try with d != 0 */
|
|
for (p = 1; p <= 8; p++) {
|
|
j = codec_clk * p / 1000;
|
|
|
|
if (j < 4 || j > 11)
|
|
continue;
|
|
|
|
/* do not use codec_clk here since we'd loose precision */
|
|
d = ((2048 * p * fsref) - j * aic3x->sysclk)
|
|
* 100 / (aic3x->sysclk/100);
|
|
|
|
clk = (10000 * j + d) / (10 * p);
|
|
|
|
/* check whether this values get closer than the best
|
|
* ones we had before */
|
|
if (abs(codec_clk - clk) < abs(codec_clk - last_clk)) {
|
|
pll_j = j; pll_d = d; pll_r = 1; pll_p = p;
|
|
last_clk = clk;
|
|
}
|
|
|
|
/* Early exit for exact matches */
|
|
if (clk == codec_clk)
|
|
goto found;
|
|
}
|
|
|
|
if (last_clk == 0) {
|
|
printk(KERN_ERR "%s(): unable to setup PLL\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
found:
|
|
snd_soc_component_update_bits(component, AIC3X_PLL_PROGA_REG, PLLP_MASK, pll_p);
|
|
snd_soc_component_write(component, AIC3X_OVRF_STATUS_AND_PLLR_REG,
|
|
pll_r << PLLR_SHIFT);
|
|
snd_soc_component_write(component, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT);
|
|
snd_soc_component_write(component, AIC3X_PLL_PROGC_REG,
|
|
(pll_d >> 6) << PLLD_MSB_SHIFT);
|
|
snd_soc_component_write(component, AIC3X_PLL_PROGD_REG,
|
|
(pll_d & 0x3F) << PLLD_LSB_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_prepare(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
|
|
int delay = 0;
|
|
int width = aic3x->slot_width;
|
|
|
|
if (!width)
|
|
width = substream->runtime->sample_bits;
|
|
|
|
/* TDM slot selection only valid in DSP_A/_B mode */
|
|
if (aic3x->dai_fmt == SND_SOC_DAIFMT_DSP_A)
|
|
delay += (aic3x->tdm_delay*width + 1);
|
|
else if (aic3x->dai_fmt == SND_SOC_DAIFMT_DSP_B)
|
|
delay += aic3x->tdm_delay*width;
|
|
|
|
/* Configure data delay */
|
|
snd_soc_component_write(component, AIC3X_ASD_INTF_CTRLC, delay);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_mute(struct snd_soc_dai *dai, int mute)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
u8 ldac_reg = snd_soc_component_read32(component, LDAC_VOL) & ~MUTE_ON;
|
|
u8 rdac_reg = snd_soc_component_read32(component, RDAC_VOL) & ~MUTE_ON;
|
|
|
|
if (mute) {
|
|
snd_soc_component_write(component, LDAC_VOL, ldac_reg | MUTE_ON);
|
|
snd_soc_component_write(component, RDAC_VOL, rdac_reg | MUTE_ON);
|
|
} else {
|
|
snd_soc_component_write(component, LDAC_VOL, ldac_reg);
|
|
snd_soc_component_write(component, RDAC_VOL, rdac_reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
|
|
|
|
/* set clock on MCLK or GPIO2 or BCLK */
|
|
snd_soc_component_update_bits(component, AIC3X_CLKGEN_CTRL_REG, PLLCLK_IN_MASK,
|
|
clk_id << PLLCLK_IN_SHIFT);
|
|
snd_soc_component_update_bits(component, AIC3X_CLKGEN_CTRL_REG, CLKDIV_IN_MASK,
|
|
clk_id << CLKDIV_IN_SHIFT);
|
|
|
|
aic3x->sysclk = freq;
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
|
|
u8 iface_areg, iface_breg;
|
|
|
|
iface_areg = snd_soc_component_read32(component, AIC3X_ASD_INTF_CTRLA) & 0x3f;
|
|
iface_breg = snd_soc_component_read32(component, AIC3X_ASD_INTF_CTRLB) & 0x3f;
|
|
|
|
/* set master/slave audio interface */
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
aic3x->master = 1;
|
|
iface_areg |= BIT_CLK_MASTER | WORD_CLK_MASTER;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
aic3x->master = 0;
|
|
iface_areg &= ~(BIT_CLK_MASTER | WORD_CLK_MASTER);
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
aic3x->master = 1;
|
|
iface_areg |= BIT_CLK_MASTER;
|
|
iface_areg &= ~WORD_CLK_MASTER;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
aic3x->master = 1;
|
|
iface_areg |= WORD_CLK_MASTER;
|
|
iface_areg &= ~BIT_CLK_MASTER;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* match both interface format and signal polarities since they
|
|
* are fixed
|
|
*/
|
|
switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK |
|
|
SND_SOC_DAIFMT_INV_MASK)) {
|
|
case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF):
|
|
break;
|
|
case (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF):
|
|
case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF):
|
|
iface_breg |= (0x01 << 6);
|
|
break;
|
|
case (SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF):
|
|
iface_breg |= (0x02 << 6);
|
|
break;
|
|
case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF):
|
|
iface_breg |= (0x03 << 6);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
aic3x->dai_fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
|
|
|
|
/* set iface */
|
|
snd_soc_component_write(component, AIC3X_ASD_INTF_CTRLA, iface_areg);
|
|
snd_soc_component_write(component, AIC3X_ASD_INTF_CTRLB, iface_breg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_set_dai_tdm_slot(struct snd_soc_dai *codec_dai,
|
|
unsigned int tx_mask, unsigned int rx_mask,
|
|
int slots, int slot_width)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
|
|
unsigned int lsb;
|
|
|
|
if (tx_mask != rx_mask) {
|
|
dev_err(component->dev, "tx and rx masks must be symmetric\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (unlikely(!tx_mask)) {
|
|
dev_err(component->dev, "tx and rx masks need to be non 0\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* TDM based on DSP mode requires slots to be adjacent */
|
|
lsb = __ffs(tx_mask);
|
|
if ((lsb + 1) != __fls(tx_mask)) {
|
|
dev_err(component->dev, "Invalid mask, slots must be adjacent\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (slot_width) {
|
|
case 16:
|
|
case 20:
|
|
case 24:
|
|
case 32:
|
|
break;
|
|
default:
|
|
dev_err(component->dev, "Unsupported slot width %d\n", slot_width);
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
aic3x->tdm_delay = lsb;
|
|
aic3x->slot_width = slot_width;
|
|
|
|
/* DOUT in high-impedance on inactive bit clocks */
|
|
snd_soc_component_update_bits(component, AIC3X_ASD_INTF_CTRLA,
|
|
DOUT_TRISTATE, DOUT_TRISTATE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_regulator_event(struct notifier_block *nb,
|
|
unsigned long event, void *data)
|
|
{
|
|
struct aic3x_disable_nb *disable_nb =
|
|
container_of(nb, struct aic3x_disable_nb, nb);
|
|
struct aic3x_priv *aic3x = disable_nb->aic3x;
|
|
|
|
if (event & REGULATOR_EVENT_DISABLE) {
|
|
/*
|
|
* Put codec to reset and require cache sync as at least one
|
|
* of the supplies was disabled
|
|
*/
|
|
if (gpio_is_valid(aic3x->gpio_reset))
|
|
gpio_set_value(aic3x->gpio_reset, 0);
|
|
regcache_mark_dirty(aic3x->regmap);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_set_power(struct snd_soc_component *component, int power)
|
|
{
|
|
struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
|
|
unsigned int pll_c, pll_d;
|
|
int ret;
|
|
|
|
if (power) {
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(aic3x->supplies),
|
|
aic3x->supplies);
|
|
if (ret)
|
|
goto out;
|
|
aic3x->power = 1;
|
|
|
|
if (gpio_is_valid(aic3x->gpio_reset)) {
|
|
udelay(1);
|
|
gpio_set_value(aic3x->gpio_reset, 1);
|
|
}
|
|
|
|
/* Sync reg_cache with the hardware */
|
|
regcache_cache_only(aic3x->regmap, false);
|
|
regcache_sync(aic3x->regmap);
|
|
|
|
/* Rewrite paired PLL D registers in case cached sync skipped
|
|
* writing one of them and thus caused other one also not
|
|
* being written
|
|
*/
|
|
pll_c = snd_soc_component_read32(component, AIC3X_PLL_PROGC_REG);
|
|
pll_d = snd_soc_component_read32(component, AIC3X_PLL_PROGD_REG);
|
|
if (pll_c == aic3x_reg[AIC3X_PLL_PROGC_REG].def ||
|
|
pll_d == aic3x_reg[AIC3X_PLL_PROGD_REG].def) {
|
|
snd_soc_component_write(component, AIC3X_PLL_PROGC_REG, pll_c);
|
|
snd_soc_component_write(component, AIC3X_PLL_PROGD_REG, pll_d);
|
|
}
|
|
|
|
/*
|
|
* Delay is needed to reduce pop-noise after syncing back the
|
|
* registers
|
|
*/
|
|
mdelay(50);
|
|
} else {
|
|
/*
|
|
* Do soft reset to this codec instance in order to clear
|
|
* possible VDD leakage currents in case the supply regulators
|
|
* remain on
|
|
*/
|
|
snd_soc_component_write(component, AIC3X_RESET, SOFT_RESET);
|
|
regcache_mark_dirty(aic3x->regmap);
|
|
aic3x->power = 0;
|
|
/* HW writes are needless when bias is off */
|
|
regcache_cache_only(aic3x->regmap, true);
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(aic3x->supplies),
|
|
aic3x->supplies);
|
|
}
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int aic3x_set_bias_level(struct snd_soc_component *component,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
break;
|
|
case SND_SOC_BIAS_PREPARE:
|
|
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_STANDBY &&
|
|
aic3x->master) {
|
|
/* enable pll */
|
|
snd_soc_component_update_bits(component, AIC3X_PLL_PROGA_REG,
|
|
PLL_ENABLE, PLL_ENABLE);
|
|
}
|
|
break;
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (!aic3x->power)
|
|
aic3x_set_power(component, 1);
|
|
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_PREPARE &&
|
|
aic3x->master) {
|
|
/* disable pll */
|
|
snd_soc_component_update_bits(component, AIC3X_PLL_PROGA_REG,
|
|
PLL_ENABLE, 0);
|
|
}
|
|
break;
|
|
case SND_SOC_BIAS_OFF:
|
|
if (aic3x->power)
|
|
aic3x_set_power(component, 0);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define AIC3X_RATES SNDRV_PCM_RATE_8000_96000
|
|
#define AIC3X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_LE | \
|
|
SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops aic3x_dai_ops = {
|
|
.hw_params = aic3x_hw_params,
|
|
.prepare = aic3x_prepare,
|
|
.digital_mute = aic3x_mute,
|
|
.set_sysclk = aic3x_set_dai_sysclk,
|
|
.set_fmt = aic3x_set_dai_fmt,
|
|
.set_tdm_slot = aic3x_set_dai_tdm_slot,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver aic3x_dai = {
|
|
.name = "tlv320aic3x-hifi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = AIC3X_RATES,
|
|
.formats = AIC3X_FORMATS,},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = AIC3X_RATES,
|
|
.formats = AIC3X_FORMATS,},
|
|
.ops = &aic3x_dai_ops,
|
|
.symmetric_rates = 1,
|
|
};
|
|
|
|
static void aic3x_mono_init(struct snd_soc_component *component)
|
|
{
|
|
/* DAC to Mono Line Out default volume and route to Output mixer */
|
|
snd_soc_component_write(component, DACL1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
snd_soc_component_write(component, DACR1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
|
|
/* unmute all outputs */
|
|
snd_soc_component_update_bits(component, MONOLOPM_CTRL, UNMUTE, UNMUTE);
|
|
|
|
/* PGA to Mono Line Out default volume, disconnect from Output Mixer */
|
|
snd_soc_component_write(component, PGAL_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
snd_soc_component_write(component, PGAR_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
|
|
/* Line2 to Mono Out default volume, disconnect from Output Mixer */
|
|
snd_soc_component_write(component, LINE2L_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
snd_soc_component_write(component, LINE2R_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
}
|
|
|
|
/*
|
|
* initialise the AIC3X driver
|
|
* register the mixer and dsp interfaces with the kernel
|
|
*/
|
|
static int aic3x_init(struct snd_soc_component *component)
|
|
{
|
|
struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
|
|
|
|
snd_soc_component_write(component, AIC3X_PAGE_SELECT, PAGE0_SELECT);
|
|
snd_soc_component_write(component, AIC3X_RESET, SOFT_RESET);
|
|
|
|
/* DAC default volume and mute */
|
|
snd_soc_component_write(component, LDAC_VOL, DEFAULT_VOL | MUTE_ON);
|
|
snd_soc_component_write(component, RDAC_VOL, DEFAULT_VOL | MUTE_ON);
|
|
|
|
/* DAC to HP default volume and route to Output mixer */
|
|
snd_soc_component_write(component, DACL1_2_HPLOUT_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
snd_soc_component_write(component, DACR1_2_HPROUT_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
snd_soc_component_write(component, DACL1_2_HPLCOM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
snd_soc_component_write(component, DACR1_2_HPRCOM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
/* DAC to Line Out default volume and route to Output mixer */
|
|
snd_soc_component_write(component, DACL1_2_LLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
snd_soc_component_write(component, DACR1_2_RLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
|
|
/* unmute all outputs */
|
|
snd_soc_component_update_bits(component, LLOPM_CTRL, UNMUTE, UNMUTE);
|
|
snd_soc_component_update_bits(component, RLOPM_CTRL, UNMUTE, UNMUTE);
|
|
snd_soc_component_update_bits(component, HPLOUT_CTRL, UNMUTE, UNMUTE);
|
|
snd_soc_component_update_bits(component, HPROUT_CTRL, UNMUTE, UNMUTE);
|
|
snd_soc_component_update_bits(component, HPLCOM_CTRL, UNMUTE, UNMUTE);
|
|
snd_soc_component_update_bits(component, HPRCOM_CTRL, UNMUTE, UNMUTE);
|
|
|
|
/* ADC default volume and unmute */
|
|
snd_soc_component_write(component, LADC_VOL, DEFAULT_GAIN);
|
|
snd_soc_component_write(component, RADC_VOL, DEFAULT_GAIN);
|
|
/* By default route Line1 to ADC PGA mixer */
|
|
snd_soc_component_write(component, LINE1L_2_LADC_CTRL, 0x0);
|
|
snd_soc_component_write(component, LINE1R_2_RADC_CTRL, 0x0);
|
|
|
|
/* PGA to HP Bypass default volume, disconnect from Output Mixer */
|
|
snd_soc_component_write(component, PGAL_2_HPLOUT_VOL, DEFAULT_VOL);
|
|
snd_soc_component_write(component, PGAR_2_HPROUT_VOL, DEFAULT_VOL);
|
|
snd_soc_component_write(component, PGAL_2_HPLCOM_VOL, DEFAULT_VOL);
|
|
snd_soc_component_write(component, PGAR_2_HPRCOM_VOL, DEFAULT_VOL);
|
|
/* PGA to Line Out default volume, disconnect from Output Mixer */
|
|
snd_soc_component_write(component, PGAL_2_LLOPM_VOL, DEFAULT_VOL);
|
|
snd_soc_component_write(component, PGAR_2_RLOPM_VOL, DEFAULT_VOL);
|
|
|
|
/* On tlv320aic3104, these registers are reserved and must not be written */
|
|
if (aic3x->model != AIC3X_MODEL_3104) {
|
|
/* Line2 to HP Bypass default volume, disconnect from Output Mixer */
|
|
snd_soc_component_write(component, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL);
|
|
snd_soc_component_write(component, LINE2R_2_HPROUT_VOL, DEFAULT_VOL);
|
|
snd_soc_component_write(component, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL);
|
|
snd_soc_component_write(component, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL);
|
|
/* Line2 Line Out default volume, disconnect from Output Mixer */
|
|
snd_soc_component_write(component, LINE2L_2_LLOPM_VOL, DEFAULT_VOL);
|
|
snd_soc_component_write(component, LINE2R_2_RLOPM_VOL, DEFAULT_VOL);
|
|
}
|
|
|
|
switch (aic3x->model) {
|
|
case AIC3X_MODEL_3X:
|
|
case AIC3X_MODEL_33:
|
|
aic3x_mono_init(component);
|
|
break;
|
|
case AIC3X_MODEL_3007:
|
|
snd_soc_component_write(component, CLASSD_CTRL, 0);
|
|
break;
|
|
}
|
|
|
|
/* Output common-mode voltage = 1.5 V */
|
|
snd_soc_component_update_bits(component, HPOUT_SC, HPOUT_SC_OCMV_MASK,
|
|
aic3x->ocmv << HPOUT_SC_OCMV_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool aic3x_is_shared_reset(struct aic3x_priv *aic3x)
|
|
{
|
|
struct aic3x_priv *a;
|
|
|
|
list_for_each_entry(a, &reset_list, list) {
|
|
if (gpio_is_valid(aic3x->gpio_reset) &&
|
|
aic3x->gpio_reset == a->gpio_reset)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int aic3x_probe(struct snd_soc_component *component)
|
|
{
|
|
struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component);
|
|
int ret, i;
|
|
|
|
aic3x->component = component;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(aic3x->supplies); i++) {
|
|
aic3x->disable_nb[i].nb.notifier_call = aic3x_regulator_event;
|
|
aic3x->disable_nb[i].aic3x = aic3x;
|
|
ret = devm_regulator_register_notifier(
|
|
aic3x->supplies[i].consumer,
|
|
&aic3x->disable_nb[i].nb);
|
|
if (ret) {
|
|
dev_err(component->dev,
|
|
"Failed to request regulator notifier: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
regcache_mark_dirty(aic3x->regmap);
|
|
aic3x_init(component);
|
|
|
|
if (aic3x->setup) {
|
|
if (aic3x->model != AIC3X_MODEL_3104) {
|
|
/* setup GPIO functions */
|
|
snd_soc_component_write(component, AIC3X_GPIO1_REG,
|
|
(aic3x->setup->gpio_func[0] & 0xf) << 4);
|
|
snd_soc_component_write(component, AIC3X_GPIO2_REG,
|
|
(aic3x->setup->gpio_func[1] & 0xf) << 4);
|
|
} else {
|
|
dev_warn(component->dev, "GPIO functionality is not supported on tlv320aic3104\n");
|
|
}
|
|
}
|
|
|
|
switch (aic3x->model) {
|
|
case AIC3X_MODEL_3X:
|
|
case AIC3X_MODEL_33:
|
|
snd_soc_add_component_controls(component, aic3x_extra_snd_controls,
|
|
ARRAY_SIZE(aic3x_extra_snd_controls));
|
|
snd_soc_add_component_controls(component, aic3x_mono_controls,
|
|
ARRAY_SIZE(aic3x_mono_controls));
|
|
break;
|
|
case AIC3X_MODEL_3007:
|
|
snd_soc_add_component_controls(component, aic3x_extra_snd_controls,
|
|
ARRAY_SIZE(aic3x_extra_snd_controls));
|
|
snd_soc_add_component_controls(component,
|
|
&aic3x_classd_amp_gain_ctrl, 1);
|
|
break;
|
|
case AIC3X_MODEL_3104:
|
|
break;
|
|
}
|
|
|
|
/* set mic bias voltage */
|
|
switch (aic3x->micbias_vg) {
|
|
case AIC3X_MICBIAS_2_0V:
|
|
case AIC3X_MICBIAS_2_5V:
|
|
case AIC3X_MICBIAS_AVDDV:
|
|
snd_soc_component_update_bits(component, MICBIAS_CTRL,
|
|
MICBIAS_LEVEL_MASK,
|
|
(aic3x->micbias_vg) << MICBIAS_LEVEL_SHIFT);
|
|
break;
|
|
case AIC3X_MICBIAS_OFF:
|
|
/*
|
|
* noting to do. target won't enter here. This is just to avoid
|
|
* compile time warning "warning: enumeration value
|
|
* 'AIC3X_MICBIAS_OFF' not handled in switch"
|
|
*/
|
|
break;
|
|
}
|
|
|
|
aic3x_add_widgets(component);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_component_driver soc_component_dev_aic3x = {
|
|
.set_bias_level = aic3x_set_bias_level,
|
|
.probe = aic3x_probe,
|
|
.controls = aic3x_snd_controls,
|
|
.num_controls = ARRAY_SIZE(aic3x_snd_controls),
|
|
.dapm_widgets = aic3x_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(aic3x_dapm_widgets),
|
|
.dapm_routes = intercon,
|
|
.num_dapm_routes = ARRAY_SIZE(intercon),
|
|
.use_pmdown_time = 1,
|
|
.endianness = 1,
|
|
.non_legacy_dai_naming = 1,
|
|
};
|
|
|
|
static void aic3x_configure_ocmv(struct i2c_client *client)
|
|
{
|
|
struct device_node *np = client->dev.of_node;
|
|
struct aic3x_priv *aic3x = i2c_get_clientdata(client);
|
|
u32 value;
|
|
int dvdd, avdd;
|
|
|
|
if (np && !of_property_read_u32(np, "ai3x-ocmv", &value)) {
|
|
/* OCMV setting is forced by DT */
|
|
if (value <= 3) {
|
|
aic3x->ocmv = value;
|
|
return;
|
|
}
|
|
}
|
|
|
|
dvdd = regulator_get_voltage(aic3x->supplies[1].consumer);
|
|
avdd = regulator_get_voltage(aic3x->supplies[2].consumer);
|
|
|
|
if (avdd > 3600000 || dvdd > 1950000) {
|
|
dev_warn(&client->dev,
|
|
"Too high supply voltage(s) AVDD: %d, DVDD: %d\n",
|
|
avdd, dvdd);
|
|
} else if (avdd == 3600000 && dvdd == 1950000) {
|
|
aic3x->ocmv = HPOUT_SC_OCMV_1_8V;
|
|
} else if (avdd > 3300000 && dvdd > 1800000) {
|
|
aic3x->ocmv = HPOUT_SC_OCMV_1_65V;
|
|
} else if (avdd > 3000000 && dvdd > 1650000) {
|
|
aic3x->ocmv = HPOUT_SC_OCMV_1_5V;
|
|
} else if (avdd >= 2700000 && dvdd >= 1525000) {
|
|
aic3x->ocmv = HPOUT_SC_OCMV_1_35V;
|
|
} else {
|
|
dev_warn(&client->dev,
|
|
"Invalid supply voltage(s) AVDD: %d, DVDD: %d\n",
|
|
avdd, dvdd);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* AIC3X 2 wire address can be up to 4 devices with device addresses
|
|
* 0x18, 0x19, 0x1A, 0x1B
|
|
*/
|
|
|
|
static const struct i2c_device_id aic3x_i2c_id[] = {
|
|
{ "tlv320aic3x", AIC3X_MODEL_3X },
|
|
{ "tlv320aic33", AIC3X_MODEL_33 },
|
|
{ "tlv320aic3007", AIC3X_MODEL_3007 },
|
|
{ "tlv320aic3106", AIC3X_MODEL_3X },
|
|
{ "tlv320aic3104", AIC3X_MODEL_3104 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id);
|
|
|
|
static const struct reg_sequence aic3007_class_d[] = {
|
|
/* Class-D speaker driver init; datasheet p. 46 */
|
|
{ AIC3X_PAGE_SELECT, 0x0D },
|
|
{ 0xD, 0x0D },
|
|
{ 0x8, 0x5C },
|
|
{ 0x8, 0x5D },
|
|
{ 0x8, 0x5C },
|
|
{ AIC3X_PAGE_SELECT, 0x00 },
|
|
};
|
|
|
|
/*
|
|
* If the i2c layer weren't so broken, we could pass this kind of data
|
|
* around
|
|
*/
|
|
static int aic3x_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct aic3x_pdata *pdata = i2c->dev.platform_data;
|
|
struct aic3x_priv *aic3x;
|
|
struct aic3x_setup_data *ai3x_setup;
|
|
struct device_node *np = i2c->dev.of_node;
|
|
int ret, i;
|
|
u32 value;
|
|
|
|
aic3x = devm_kzalloc(&i2c->dev, sizeof(struct aic3x_priv), GFP_KERNEL);
|
|
if (!aic3x)
|
|
return -ENOMEM;
|
|
|
|
aic3x->regmap = devm_regmap_init_i2c(i2c, &aic3x_regmap);
|
|
if (IS_ERR(aic3x->regmap)) {
|
|
ret = PTR_ERR(aic3x->regmap);
|
|
return ret;
|
|
}
|
|
|
|
regcache_cache_only(aic3x->regmap, true);
|
|
|
|
i2c_set_clientdata(i2c, aic3x);
|
|
if (pdata) {
|
|
aic3x->gpio_reset = pdata->gpio_reset;
|
|
aic3x->setup = pdata->setup;
|
|
aic3x->micbias_vg = pdata->micbias_vg;
|
|
} else if (np) {
|
|
ai3x_setup = devm_kzalloc(&i2c->dev, sizeof(*ai3x_setup),
|
|
GFP_KERNEL);
|
|
if (!ai3x_setup)
|
|
return -ENOMEM;
|
|
|
|
ret = of_get_named_gpio(np, "reset-gpios", 0);
|
|
if (ret >= 0) {
|
|
aic3x->gpio_reset = ret;
|
|
} else {
|
|
ret = of_get_named_gpio(np, "gpio-reset", 0);
|
|
if (ret > 0) {
|
|
dev_warn(&i2c->dev, "Using deprecated property \"gpio-reset\", please update your DT");
|
|
aic3x->gpio_reset = ret;
|
|
} else {
|
|
aic3x->gpio_reset = -1;
|
|
}
|
|
}
|
|
|
|
if (of_property_read_u32_array(np, "ai3x-gpio-func",
|
|
ai3x_setup->gpio_func, 2) >= 0) {
|
|
aic3x->setup = ai3x_setup;
|
|
}
|
|
|
|
if (!of_property_read_u32(np, "ai3x-micbias-vg", &value)) {
|
|
switch (value) {
|
|
case 1 :
|
|
aic3x->micbias_vg = AIC3X_MICBIAS_2_0V;
|
|
break;
|
|
case 2 :
|
|
aic3x->micbias_vg = AIC3X_MICBIAS_2_5V;
|
|
break;
|
|
case 3 :
|
|
aic3x->micbias_vg = AIC3X_MICBIAS_AVDDV;
|
|
break;
|
|
default :
|
|
aic3x->micbias_vg = AIC3X_MICBIAS_OFF;
|
|
dev_err(&i2c->dev, "Unsuitable MicBias voltage "
|
|
"found in DT\n");
|
|
}
|
|
} else {
|
|
aic3x->micbias_vg = AIC3X_MICBIAS_OFF;
|
|
}
|
|
|
|
} else {
|
|
aic3x->gpio_reset = -1;
|
|
}
|
|
|
|
aic3x->model = id->driver_data;
|
|
|
|
if (gpio_is_valid(aic3x->gpio_reset) &&
|
|
!aic3x_is_shared_reset(aic3x)) {
|
|
ret = gpio_request(aic3x->gpio_reset, "tlv320aic3x reset");
|
|
if (ret != 0)
|
|
goto err;
|
|
gpio_direction_output(aic3x->gpio_reset, 0);
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(aic3x->supplies); i++)
|
|
aic3x->supplies[i].supply = aic3x_supply_names[i];
|
|
|
|
ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(aic3x->supplies),
|
|
aic3x->supplies);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
|
|
goto err_gpio;
|
|
}
|
|
|
|
aic3x_configure_ocmv(i2c);
|
|
|
|
if (aic3x->model == AIC3X_MODEL_3007) {
|
|
ret = regmap_register_patch(aic3x->regmap, aic3007_class_d,
|
|
ARRAY_SIZE(aic3007_class_d));
|
|
if (ret != 0)
|
|
dev_err(&i2c->dev, "Failed to init class D: %d\n",
|
|
ret);
|
|
}
|
|
|
|
ret = devm_snd_soc_register_component(&i2c->dev,
|
|
&soc_component_dev_aic3x, &aic3x_dai, 1);
|
|
|
|
if (ret != 0)
|
|
goto err_gpio;
|
|
|
|
INIT_LIST_HEAD(&aic3x->list);
|
|
list_add(&aic3x->list, &reset_list);
|
|
|
|
return 0;
|
|
|
|
err_gpio:
|
|
if (gpio_is_valid(aic3x->gpio_reset) &&
|
|
!aic3x_is_shared_reset(aic3x))
|
|
gpio_free(aic3x->gpio_reset);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int aic3x_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct aic3x_priv *aic3x = i2c_get_clientdata(client);
|
|
|
|
list_del(&aic3x->list);
|
|
|
|
if (gpio_is_valid(aic3x->gpio_reset) &&
|
|
!aic3x_is_shared_reset(aic3x)) {
|
|
gpio_set_value(aic3x->gpio_reset, 0);
|
|
gpio_free(aic3x->gpio_reset);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF)
|
|
static const struct of_device_id tlv320aic3x_of_match[] = {
|
|
{ .compatible = "ti,tlv320aic3x", },
|
|
{ .compatible = "ti,tlv320aic33" },
|
|
{ .compatible = "ti,tlv320aic3007" },
|
|
{ .compatible = "ti,tlv320aic3106" },
|
|
{ .compatible = "ti,tlv320aic3104" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tlv320aic3x_of_match);
|
|
#endif
|
|
|
|
/* machine i2c codec control layer */
|
|
static struct i2c_driver aic3x_i2c_driver = {
|
|
.driver = {
|
|
.name = "tlv320aic3x-codec",
|
|
.of_match_table = of_match_ptr(tlv320aic3x_of_match),
|
|
},
|
|
.probe = aic3x_i2c_probe,
|
|
.remove = aic3x_i2c_remove,
|
|
.id_table = aic3x_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(aic3x_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC TLV320AIC3X codec driver");
|
|
MODULE_AUTHOR("Vladimir Barinov");
|
|
MODULE_LICENSE("GPL");
|