mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
41b251318a
The Diamond Systems GPIO-MM series of devices contain two 82C55A devices, which each feature three 8-bit ports of I/O. Since eight input lines are acquired on a single port input read, the GPIO-MM GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the gpiomm_gpio_get_multiple function which serves as the respective get_multiple callback. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
355 lines
10 KiB
C
355 lines
10 KiB
C
/*
|
|
* GPIO driver for the Diamond Systems GPIO-MM
|
|
* Copyright (C) 2016 William Breathitt Gray
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License, version 2, as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* This driver supports the following Diamond Systems devices: GPIO-MM and
|
|
* GPIO-MM-12.
|
|
*/
|
|
#include <linux/bitmap.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define GPIOMM_EXTENT 8
|
|
#define MAX_NUM_GPIOMM max_num_isa_dev(GPIOMM_EXTENT)
|
|
|
|
static unsigned int base[MAX_NUM_GPIOMM];
|
|
static unsigned int num_gpiomm;
|
|
module_param_hw_array(base, uint, ioport, &num_gpiomm, 0);
|
|
MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses");
|
|
|
|
/**
|
|
* struct gpiomm_gpio - GPIO device private data structure
|
|
* @chip: instance of the gpio_chip
|
|
* @io_state: bit I/O state (whether bit is set to input or output)
|
|
* @out_state: output bits state
|
|
* @control: Control registers state
|
|
* @lock: synchronization lock to prevent I/O race conditions
|
|
* @base: base port address of the GPIO device
|
|
*/
|
|
struct gpiomm_gpio {
|
|
struct gpio_chip chip;
|
|
unsigned char io_state[6];
|
|
unsigned char out_state[6];
|
|
unsigned char control[2];
|
|
spinlock_t lock;
|
|
unsigned int base;
|
|
};
|
|
|
|
static int gpiomm_gpio_get_direction(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
const unsigned int port = offset / 8;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
|
|
return !!(gpiommgpio->io_state[port] & mask);
|
|
}
|
|
|
|
static int gpiomm_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
const unsigned int io_port = offset / 8;
|
|
const unsigned int control_port = io_port / 3;
|
|
const unsigned int control_addr = gpiommgpio->base + 3 + control_port*4;
|
|
unsigned long flags;
|
|
unsigned int control;
|
|
|
|
spin_lock_irqsave(&gpiommgpio->lock, flags);
|
|
|
|
/* Check if configuring Port C */
|
|
if (io_port == 2 || io_port == 5) {
|
|
/* Port C can be configured by nibble */
|
|
if (offset % 8 > 3) {
|
|
gpiommgpio->io_state[io_port] |= 0xF0;
|
|
gpiommgpio->control[control_port] |= BIT(3);
|
|
} else {
|
|
gpiommgpio->io_state[io_port] |= 0x0F;
|
|
gpiommgpio->control[control_port] |= BIT(0);
|
|
}
|
|
} else {
|
|
gpiommgpio->io_state[io_port] |= 0xFF;
|
|
if (io_port == 0 || io_port == 3)
|
|
gpiommgpio->control[control_port] |= BIT(4);
|
|
else
|
|
gpiommgpio->control[control_port] |= BIT(1);
|
|
}
|
|
|
|
control = BIT(7) | gpiommgpio->control[control_port];
|
|
outb(control, control_addr);
|
|
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpiomm_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int offset, int value)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
const unsigned int io_port = offset / 8;
|
|
const unsigned int control_port = io_port / 3;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
const unsigned int control_addr = gpiommgpio->base + 3 + control_port*4;
|
|
const unsigned int out_port = (io_port > 2) ? io_port + 1 : io_port;
|
|
unsigned long flags;
|
|
unsigned int control;
|
|
|
|
spin_lock_irqsave(&gpiommgpio->lock, flags);
|
|
|
|
/* Check if configuring Port C */
|
|
if (io_port == 2 || io_port == 5) {
|
|
/* Port C can be configured by nibble */
|
|
if (offset % 8 > 3) {
|
|
gpiommgpio->io_state[io_port] &= 0x0F;
|
|
gpiommgpio->control[control_port] &= ~BIT(3);
|
|
} else {
|
|
gpiommgpio->io_state[io_port] &= 0xF0;
|
|
gpiommgpio->control[control_port] &= ~BIT(0);
|
|
}
|
|
} else {
|
|
gpiommgpio->io_state[io_port] &= 0x00;
|
|
if (io_port == 0 || io_port == 3)
|
|
gpiommgpio->control[control_port] &= ~BIT(4);
|
|
else
|
|
gpiommgpio->control[control_port] &= ~BIT(1);
|
|
}
|
|
|
|
if (value)
|
|
gpiommgpio->out_state[io_port] |= mask;
|
|
else
|
|
gpiommgpio->out_state[io_port] &= ~mask;
|
|
|
|
control = BIT(7) | gpiommgpio->control[control_port];
|
|
outb(control, control_addr);
|
|
|
|
outb(gpiommgpio->out_state[io_port], gpiommgpio->base + out_port);
|
|
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpiomm_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
const unsigned int port = offset / 8;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
const unsigned int in_port = (port > 2) ? port + 1 : port;
|
|
unsigned long flags;
|
|
unsigned int port_state;
|
|
|
|
spin_lock_irqsave(&gpiommgpio->lock, flags);
|
|
|
|
/* ensure that GPIO is set for input */
|
|
if (!(gpiommgpio->io_state[port] & mask)) {
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
port_state = inb(gpiommgpio->base + in_port);
|
|
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
|
|
return !!(port_state & mask);
|
|
}
|
|
|
|
static int gpiomm_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
|
|
unsigned long *bits)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
size_t i;
|
|
const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
|
|
const unsigned int gpio_reg_size = 8;
|
|
unsigned int bits_offset;
|
|
size_t word_index;
|
|
unsigned int word_offset;
|
|
unsigned long word_mask;
|
|
const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
|
|
unsigned long port_state;
|
|
|
|
/* clear bits array to a clean slate */
|
|
bitmap_zero(bits, chip->ngpio);
|
|
|
|
/* get bits are evaluated a gpio port register at a time */
|
|
for (i = 0; i < ARRAY_SIZE(ports); i++) {
|
|
/* gpio offset in bits array */
|
|
bits_offset = i * gpio_reg_size;
|
|
|
|
/* word index for bits array */
|
|
word_index = BIT_WORD(bits_offset);
|
|
|
|
/* gpio offset within current word of bits array */
|
|
word_offset = bits_offset % BITS_PER_LONG;
|
|
|
|
/* mask of get bits for current gpio within current word */
|
|
word_mask = mask[word_index] & (port_mask << word_offset);
|
|
if (!word_mask) {
|
|
/* no get bits in this port so skip to next one */
|
|
continue;
|
|
}
|
|
|
|
/* read bits from current gpio port */
|
|
port_state = inb(gpiommgpio->base + ports[i]);
|
|
|
|
/* store acquired bits at respective bits array offset */
|
|
bits[word_index] |= port_state << word_offset;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpiomm_gpio_set(struct gpio_chip *chip, unsigned int offset,
|
|
int value)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
const unsigned int port = offset / 8;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
const unsigned int out_port = (port > 2) ? port + 1 : port;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpiommgpio->lock, flags);
|
|
|
|
if (value)
|
|
gpiommgpio->out_state[port] |= mask;
|
|
else
|
|
gpiommgpio->out_state[port] &= ~mask;
|
|
|
|
outb(gpiommgpio->out_state[port], gpiommgpio->base + out_port);
|
|
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
}
|
|
|
|
static void gpiomm_gpio_set_multiple(struct gpio_chip *chip,
|
|
unsigned long *mask, unsigned long *bits)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
unsigned int i;
|
|
const unsigned int gpio_reg_size = 8;
|
|
unsigned int port;
|
|
unsigned int out_port;
|
|
unsigned int bitmask;
|
|
unsigned long flags;
|
|
|
|
/* set bits are evaluated a gpio register size at a time */
|
|
for (i = 0; i < chip->ngpio; i += gpio_reg_size) {
|
|
/* no more set bits in this mask word; skip to the next word */
|
|
if (!mask[BIT_WORD(i)]) {
|
|
i = (BIT_WORD(i) + 1) * BITS_PER_LONG - gpio_reg_size;
|
|
continue;
|
|
}
|
|
|
|
port = i / gpio_reg_size;
|
|
out_port = (port > 2) ? port + 1 : port;
|
|
bitmask = mask[BIT_WORD(i)] & bits[BIT_WORD(i)];
|
|
|
|
spin_lock_irqsave(&gpiommgpio->lock, flags);
|
|
|
|
/* update output state data and set device gpio register */
|
|
gpiommgpio->out_state[port] &= ~mask[BIT_WORD(i)];
|
|
gpiommgpio->out_state[port] |= bitmask;
|
|
outb(gpiommgpio->out_state[port], gpiommgpio->base + out_port);
|
|
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
|
|
/* prepare for next gpio register set */
|
|
mask[BIT_WORD(i)] >>= gpio_reg_size;
|
|
bits[BIT_WORD(i)] >>= gpio_reg_size;
|
|
}
|
|
}
|
|
|
|
#define GPIOMM_NGPIO 48
|
|
static const char *gpiomm_names[GPIOMM_NGPIO] = {
|
|
"Port 1A0", "Port 1A1", "Port 1A2", "Port 1A3", "Port 1A4", "Port 1A5",
|
|
"Port 1A6", "Port 1A7", "Port 1B0", "Port 1B1", "Port 1B2", "Port 1B3",
|
|
"Port 1B4", "Port 1B5", "Port 1B6", "Port 1B7", "Port 1C0", "Port 1C1",
|
|
"Port 1C2", "Port 1C3", "Port 1C4", "Port 1C5", "Port 1C6", "Port 1C7",
|
|
"Port 2A0", "Port 2A1", "Port 2A2", "Port 2A3", "Port 2A4", "Port 2A5",
|
|
"Port 2A6", "Port 2A7", "Port 2B0", "Port 2B1", "Port 2B2", "Port 2B3",
|
|
"Port 2B4", "Port 2B5", "Port 2B6", "Port 2B7", "Port 2C0", "Port 2C1",
|
|
"Port 2C2", "Port 2C3", "Port 2C4", "Port 2C5", "Port 2C6", "Port 2C7",
|
|
};
|
|
|
|
static int gpiomm_probe(struct device *dev, unsigned int id)
|
|
{
|
|
struct gpiomm_gpio *gpiommgpio;
|
|
const char *const name = dev_name(dev);
|
|
int err;
|
|
|
|
gpiommgpio = devm_kzalloc(dev, sizeof(*gpiommgpio), GFP_KERNEL);
|
|
if (!gpiommgpio)
|
|
return -ENOMEM;
|
|
|
|
if (!devm_request_region(dev, base[id], GPIOMM_EXTENT, name)) {
|
|
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
|
|
base[id], base[id] + GPIOMM_EXTENT);
|
|
return -EBUSY;
|
|
}
|
|
|
|
gpiommgpio->chip.label = name;
|
|
gpiommgpio->chip.parent = dev;
|
|
gpiommgpio->chip.owner = THIS_MODULE;
|
|
gpiommgpio->chip.base = -1;
|
|
gpiommgpio->chip.ngpio = GPIOMM_NGPIO;
|
|
gpiommgpio->chip.names = gpiomm_names;
|
|
gpiommgpio->chip.get_direction = gpiomm_gpio_get_direction;
|
|
gpiommgpio->chip.direction_input = gpiomm_gpio_direction_input;
|
|
gpiommgpio->chip.direction_output = gpiomm_gpio_direction_output;
|
|
gpiommgpio->chip.get = gpiomm_gpio_get;
|
|
gpiommgpio->chip.get_multiple = gpiomm_gpio_get_multiple;
|
|
gpiommgpio->chip.set = gpiomm_gpio_set;
|
|
gpiommgpio->chip.set_multiple = gpiomm_gpio_set_multiple;
|
|
gpiommgpio->base = base[id];
|
|
|
|
spin_lock_init(&gpiommgpio->lock);
|
|
|
|
err = devm_gpiochip_add_data(dev, &gpiommgpio->chip, gpiommgpio);
|
|
if (err) {
|
|
dev_err(dev, "GPIO registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
/* initialize all GPIO as output */
|
|
outb(0x80, base[id] + 3);
|
|
outb(0x00, base[id]);
|
|
outb(0x00, base[id] + 1);
|
|
outb(0x00, base[id] + 2);
|
|
outb(0x80, base[id] + 7);
|
|
outb(0x00, base[id] + 4);
|
|
outb(0x00, base[id] + 5);
|
|
outb(0x00, base[id] + 6);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct isa_driver gpiomm_driver = {
|
|
.probe = gpiomm_probe,
|
|
.driver = {
|
|
.name = "gpio-mm"
|
|
},
|
|
};
|
|
|
|
module_isa_driver(gpiomm_driver, num_gpiomm);
|
|
|
|
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
|
|
MODULE_DESCRIPTION("Diamond Systems GPIO-MM GPIO driver");
|
|
MODULE_LICENSE("GPL v2");
|