mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-13 14:04:05 +08:00
61e6ae711a
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
307 lines
7.8 KiB
C
307 lines
7.8 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Allwinner sunxi AHCI SATA platform driver
|
|
* Copyright 2013 Olliver Schinagl <oliver@schinagl.nl>
|
|
* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
|
|
* Based on code from Allwinner Technology Co., Ltd. <www.allwinnertech.com>,
|
|
* Daniel Wang <danielwang@allwinnertech.com>
|
|
*/
|
|
|
|
#include <linux/ahci_platform.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include "ahci.h"
|
|
|
|
#define DRV_NAME "ahci-sunxi"
|
|
|
|
/* Insmod parameters */
|
|
static bool enable_pmp;
|
|
module_param(enable_pmp, bool, 0);
|
|
MODULE_PARM_DESC(enable_pmp,
|
|
"Enable support for sata port multipliers, only use if you use a pmp!");
|
|
|
|
#define AHCI_BISTAFR 0x00a0
|
|
#define AHCI_BISTCR 0x00a4
|
|
#define AHCI_BISTFCTR 0x00a8
|
|
#define AHCI_BISTSR 0x00ac
|
|
#define AHCI_BISTDECR 0x00b0
|
|
#define AHCI_DIAGNR0 0x00b4
|
|
#define AHCI_DIAGNR1 0x00b8
|
|
#define AHCI_OOBR 0x00bc
|
|
#define AHCI_PHYCS0R 0x00c0
|
|
#define AHCI_PHYCS1R 0x00c4
|
|
#define AHCI_PHYCS2R 0x00c8
|
|
#define AHCI_TIMER1MS 0x00e0
|
|
#define AHCI_GPARAM1R 0x00e8
|
|
#define AHCI_GPARAM2R 0x00ec
|
|
#define AHCI_PPARAMR 0x00f0
|
|
#define AHCI_TESTR 0x00f4
|
|
#define AHCI_VERSIONR 0x00f8
|
|
#define AHCI_IDR 0x00fc
|
|
#define AHCI_RWCR 0x00fc
|
|
#define AHCI_P0DMACR 0x0170
|
|
#define AHCI_P0PHYCR 0x0178
|
|
#define AHCI_P0PHYSR 0x017c
|
|
|
|
static void sunxi_clrbits(void __iomem *reg, u32 clr_val)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = readl(reg);
|
|
reg_val &= ~(clr_val);
|
|
writel(reg_val, reg);
|
|
}
|
|
|
|
static void sunxi_setbits(void __iomem *reg, u32 set_val)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = readl(reg);
|
|
reg_val |= set_val;
|
|
writel(reg_val, reg);
|
|
}
|
|
|
|
static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = readl(reg);
|
|
reg_val &= ~(clr_val);
|
|
reg_val |= set_val;
|
|
writel(reg_val, reg);
|
|
}
|
|
|
|
static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift)
|
|
{
|
|
return (readl(reg) >> shift) & mask;
|
|
}
|
|
|
|
static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
|
|
{
|
|
u32 reg_val;
|
|
int timeout;
|
|
|
|
/* This magic is from the original code */
|
|
writel(0, reg_base + AHCI_RWCR);
|
|
msleep(5);
|
|
|
|
sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
|
|
sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
|
|
(0x7 << 24),
|
|
(0x5 << 24) | BIT(23) | BIT(18));
|
|
sunxi_clrsetbits(reg_base + AHCI_PHYCS1R,
|
|
(0x3 << 16) | (0x1f << 8) | (0x3 << 6),
|
|
(0x2 << 16) | (0x6 << 8) | (0x2 << 6));
|
|
sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15));
|
|
sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19));
|
|
sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
|
|
(0x7 << 20), (0x3 << 20));
|
|
sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
|
|
(0x1f << 5), (0x19 << 5));
|
|
msleep(5);
|
|
|
|
sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
|
|
|
|
timeout = 250; /* Power up takes aprox 50 us */
|
|
do {
|
|
reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28);
|
|
if (reg_val == 0x02)
|
|
break;
|
|
|
|
if (--timeout == 0) {
|
|
dev_err(dev, "PHY power up failed.\n");
|
|
return -EIO;
|
|
}
|
|
udelay(1);
|
|
} while (1);
|
|
|
|
sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24));
|
|
|
|
timeout = 100; /* Calibration takes aprox 10 us */
|
|
do {
|
|
reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24);
|
|
if (reg_val == 0x00)
|
|
break;
|
|
|
|
if (--timeout == 0) {
|
|
dev_err(dev, "PHY calibration failed.\n");
|
|
return -EIO;
|
|
}
|
|
udelay(1);
|
|
} while (1);
|
|
|
|
msleep(15);
|
|
|
|
writel(0x7, reg_base + AHCI_RWCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_sunxi_start_engine(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
|
|
/* Setup DMA before DMA start
|
|
*
|
|
* NOTE: A similar SoC with SATA/AHCI by Texas Instruments documents
|
|
* this Vendor Specific Port (P0DMACR, aka PxDMACR) in its
|
|
* User's Guide document (TMS320C674x/OMAP-L1x Processor
|
|
* Serial ATA (SATA) Controller, Literature Number: SPRUGJ8C,
|
|
* March 2011, Chapter 4.33 Port DMA Control Register (P0DMACR),
|
|
* p.68, https://www.ti.com/lit/ug/sprugj8c/sprugj8c.pdf)
|
|
* as equivalent to the following struct:
|
|
*
|
|
* struct AHCI_P0DMACR_t
|
|
* {
|
|
* unsigned TXTS : 4;
|
|
* unsigned RXTS : 4;
|
|
* unsigned TXABL : 4;
|
|
* unsigned RXABL : 4;
|
|
* unsigned Reserved : 16;
|
|
* };
|
|
*
|
|
* TXTS: Transmit Transaction Size (TX_TRANSACTION_SIZE).
|
|
* This field defines the DMA transaction size in DWORDs for
|
|
* transmit (system bus read, device write) operation. [...]
|
|
*
|
|
* RXTS: Receive Transaction Size (RX_TRANSACTION_SIZE).
|
|
* This field defines the Port DMA transaction size in DWORDs
|
|
* for receive (system bus write, device read) operation. [...]
|
|
*
|
|
* TXABL: Transmit Burst Limit.
|
|
* This field allows software to limit the VBUSP master read
|
|
* burst size. [...]
|
|
*
|
|
* RXABL: Receive Burst Limit.
|
|
* Allows software to limit the VBUSP master write burst
|
|
* size. [...]
|
|
*
|
|
* Reserved: Reserved.
|
|
*
|
|
*
|
|
* NOTE: According to the above document, the following alternative
|
|
* to the code below could perhaps be a better option
|
|
* (or preparation) for possible further improvements later:
|
|
* sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ffff,
|
|
* 0x00000033);
|
|
*/
|
|
sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ffff, 0x00004433);
|
|
|
|
/* Start DMA */
|
|
sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START);
|
|
}
|
|
|
|
static const struct ata_port_info ahci_sunxi_port_info = {
|
|
.flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ | ATA_FLAG_NO_DIPM,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_platform_ops,
|
|
};
|
|
|
|
static const struct scsi_host_template ahci_platform_sht = {
|
|
AHCI_SHT(DRV_NAME),
|
|
};
|
|
|
|
static int ahci_sunxi_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct ahci_host_priv *hpriv;
|
|
int rc;
|
|
|
|
hpriv = ahci_platform_get_resources(pdev, AHCI_PLATFORM_GET_RESETS);
|
|
if (IS_ERR(hpriv))
|
|
return PTR_ERR(hpriv);
|
|
|
|
hpriv->start_engine = ahci_sunxi_start_engine;
|
|
|
|
rc = ahci_platform_enable_resources(hpriv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
hpriv->flags = AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
|
|
AHCI_HFLAG_YES_NCQ;
|
|
|
|
/*
|
|
* The sunxi sata controller seems to be unable to successfully do a
|
|
* soft reset if no pmp is attached, so disable pmp use unless
|
|
* requested, otherwise directly attached disks do not work.
|
|
*/
|
|
if (!enable_pmp)
|
|
hpriv->flags |= AHCI_HFLAG_NO_PMP;
|
|
|
|
rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info,
|
|
&ahci_platform_sht);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
return 0;
|
|
|
|
disable_resources:
|
|
ahci_platform_disable_resources(hpriv);
|
|
return rc;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int ahci_sunxi_resume(struct device *dev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
int rc;
|
|
|
|
rc = ahci_platform_enable_resources(hpriv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
rc = ahci_platform_resume_host(dev);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
return 0;
|
|
|
|
disable_resources:
|
|
ahci_platform_disable_resources(hpriv);
|
|
return rc;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend,
|
|
ahci_sunxi_resume);
|
|
|
|
static const struct of_device_id ahci_sunxi_of_match[] = {
|
|
{ .compatible = "allwinner,sun4i-a10-ahci", },
|
|
{ .compatible = "allwinner,sun8i-r40-ahci", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match);
|
|
|
|
static struct platform_driver ahci_sunxi_driver = {
|
|
.probe = ahci_sunxi_probe,
|
|
.remove_new = ata_platform_remove_one,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = ahci_sunxi_of_match,
|
|
.pm = &ahci_sunxi_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(ahci_sunxi_driver);
|
|
|
|
MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA driver");
|
|
MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>");
|
|
MODULE_LICENSE("GPL");
|