linux/drivers/net/e1000e
Alexander Duyck a825e00c98 e1000e: swap max hw supported frame size between 82574 and 82583
There appears to have been a mixup in the max supported jumbo frame size
between 82574 and 82583 which ended up disabling jumbo frames on the 82574
as a result.  This patch swaps the two so that this issue is resolved.

This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=14261

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04 21:08:49 -07:00
..
82571.c e1000e: swap max hw supported frame size between 82574 and 82583 2009-10-04 21:08:49 -07:00
defines.h e1000e: delay after LCD reset and proper checks for PHY configuration done 2009-07-03 20:09:29 -07:00
e1000.h Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-06-15 03:02:23 -07:00
es2lan.c e1000e: add support for 82577/82578 GbE LOM parts 2009-06-03 02:46:34 -07:00
ethtool.c e1000e: Expose MDI-X status via ethtool change 2009-06-09 05:25:36 -07:00
hw.h e1000e: disable K1 at 1000Mbps for 82577/82578 2009-07-03 20:09:42 -07:00
ich8lan.c e1000e: fix potential NVM corruption on ICH9 with 8K bank size 2009-08-09 21:45:38 -07:00
lib.c e1000e: disable K1 at 1000Mbps for 82577/82578 2009-07-03 20:09:42 -07:00
Makefile e1000e: reformat comment blocks, cosmetic changes only 2008-03-28 22:14:56 -04:00
netdev.c e1000e/igb/ixgbe: Don't report an error if devices don't support AER 2009-10-02 10:04:12 -07:00
param.c e1000e: enable CRC stripping by default 2009-06-03 02:46:31 -07:00
phy.c e1000e: delay second read of PHY_STATUS register on failure of first read 2009-07-03 20:09:39 -07:00