linux/drivers/gpio/gpio-rda.c
Andy Shevchenko 9804456e60 gpio: Remove unused local OF node pointers
After the commit 448cf90513 ("gpio: Get rid of duplicate of_node
assignment in the drivers") the OF node local pointers become unused.
Remove them for good and make compiler happy about.

Fixes: 448cf90513 ("gpio: Get rid of duplicate of_node assignment in the drivers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Bart: removed unrelated change in gpio-brcmstb]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-22 10:05:26 +01:00

290 lines
7.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* RDA Micro GPIO driver
*
* Copyright (C) 2012 RDA Micro Inc.
* Copyright (C) 2019 Manivannan Sadhasivam
*/
#include <linux/bitops.h>
#include <linux/gpio/driver.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#define RDA_GPIO_OEN_VAL 0x00
#define RDA_GPIO_OEN_SET_OUT 0x04
#define RDA_GPIO_OEN_SET_IN 0x08
#define RDA_GPIO_VAL 0x0c
#define RDA_GPIO_SET 0x10
#define RDA_GPIO_CLR 0x14
#define RDA_GPIO_INT_CTRL_SET 0x18
#define RDA_GPIO_INT_CTRL_CLR 0x1c
#define RDA_GPIO_INT_CLR 0x20
#define RDA_GPIO_INT_STATUS 0x24
#define RDA_GPIO_IRQ_RISE_SHIFT 0
#define RDA_GPIO_IRQ_FALL_SHIFT 8
#define RDA_GPIO_DEBOUCE_SHIFT 16
#define RDA_GPIO_LEVEL_SHIFT 24
#define RDA_GPIO_IRQ_MASK 0xff
/* Each bank consists of 32 GPIOs */
#define RDA_GPIO_BANK_NR 32
struct rda_gpio {
struct gpio_chip chip;
void __iomem *base;
spinlock_t lock;
struct irq_chip irq_chip;
int irq;
};
static inline void rda_gpio_update(struct gpio_chip *chip, unsigned int offset,
u16 reg, int val)
{
struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
void __iomem *base = rda_gpio->base;
unsigned long flags;
u32 tmp;
spin_lock_irqsave(&rda_gpio->lock, flags);
tmp = readl_relaxed(base + reg);
if (val)
tmp |= BIT(offset);
else
tmp &= ~BIT(offset);
writel_relaxed(tmp, base + reg);
spin_unlock_irqrestore(&rda_gpio->lock, flags);
}
static void rda_gpio_irq_mask(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
void __iomem *base = rda_gpio->base;
u32 offset = irqd_to_hwirq(data);
u32 value;
value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
value |= BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
}
static void rda_gpio_irq_ack(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
u32 offset = irqd_to_hwirq(data);
rda_gpio_update(chip, offset, RDA_GPIO_INT_CLR, 1);
}
static int rda_gpio_set_irq(struct gpio_chip *chip, u32 offset,
unsigned int flow_type)
{
struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
void __iomem *base = rda_gpio->base;
u32 value;
switch (flow_type) {
case IRQ_TYPE_EDGE_RISING:
/* Set rising edge trigger */
value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
/* Switch to edge trigger interrupt */
value = BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
break;
case IRQ_TYPE_EDGE_FALLING:
/* Set falling edge trigger */
value = BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
/* Switch to edge trigger interrupt */
value = BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
break;
case IRQ_TYPE_EDGE_BOTH:
/* Set both edge trigger */
value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
value |= BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
/* Switch to edge trigger interrupt */
value = BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_CLR);
break;
case IRQ_TYPE_LEVEL_HIGH:
/* Set high level trigger */
value = BIT(offset) << RDA_GPIO_IRQ_RISE_SHIFT;
/* Switch to level trigger interrupt */
value |= BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
break;
case IRQ_TYPE_LEVEL_LOW:
/* Set low level trigger */
value = BIT(offset) << RDA_GPIO_IRQ_FALL_SHIFT;
/* Switch to level trigger interrupt */
value |= BIT(offset) << RDA_GPIO_LEVEL_SHIFT;
writel_relaxed(value, base + RDA_GPIO_INT_CTRL_SET);
break;
default:
return -EINVAL;
}
return 0;
}
static void rda_gpio_irq_unmask(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
u32 offset = irqd_to_hwirq(data);
u32 trigger = irqd_get_trigger_type(data);
rda_gpio_set_irq(chip, offset, trigger);
}
static int rda_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
u32 offset = irqd_to_hwirq(data);
int ret;
ret = rda_gpio_set_irq(chip, offset, flow_type);
if (ret)
return ret;
if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
irq_set_handler_locked(data, handle_level_irq);
else if (flow_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
irq_set_handler_locked(data, handle_edge_irq);
return 0;
}
static void rda_gpio_irq_handler(struct irq_desc *desc)
{
struct gpio_chip *chip = irq_desc_get_handler_data(desc);
struct irq_chip *ic = irq_desc_get_chip(desc);
struct rda_gpio *rda_gpio = gpiochip_get_data(chip);
unsigned long status;
u32 n;
chained_irq_enter(ic, desc);
status = readl_relaxed(rda_gpio->base + RDA_GPIO_INT_STATUS);
/* Only lower 8 bits are capable of generating interrupts */
status &= RDA_GPIO_IRQ_MASK;
for_each_set_bit(n, &status, RDA_GPIO_BANK_NR)
generic_handle_domain_irq(chip->irq.domain, n);
chained_irq_exit(ic, desc);
}
static int rda_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct gpio_irq_chip *girq;
struct rda_gpio *rda_gpio;
u32 ngpios;
int ret;
rda_gpio = devm_kzalloc(dev, sizeof(*rda_gpio), GFP_KERNEL);
if (!rda_gpio)
return -ENOMEM;
ret = device_property_read_u32(dev, "ngpios", &ngpios);
if (ret < 0)
return ret;
/*
* Not all ports have interrupt capability. For instance, on
* RDA8810PL, GPIOC doesn't support interrupt. So we must handle
* those also.
*/
rda_gpio->irq = platform_get_irq(pdev, 0);
rda_gpio->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(rda_gpio->base))
return PTR_ERR(rda_gpio->base);
spin_lock_init(&rda_gpio->lock);
ret = bgpio_init(&rda_gpio->chip, dev, 4,
rda_gpio->base + RDA_GPIO_VAL,
rda_gpio->base + RDA_GPIO_SET,
rda_gpio->base + RDA_GPIO_CLR,
rda_gpio->base + RDA_GPIO_OEN_SET_OUT,
rda_gpio->base + RDA_GPIO_OEN_SET_IN,
BGPIOF_READ_OUTPUT_REG_SET);
if (ret) {
dev_err(dev, "bgpio_init failed\n");
return ret;
}
rda_gpio->chip.label = dev_name(dev);
rda_gpio->chip.ngpio = ngpios;
rda_gpio->chip.base = -1;
if (rda_gpio->irq >= 0) {
rda_gpio->irq_chip.name = "rda-gpio",
rda_gpio->irq_chip.irq_ack = rda_gpio_irq_ack,
rda_gpio->irq_chip.irq_mask = rda_gpio_irq_mask,
rda_gpio->irq_chip.irq_unmask = rda_gpio_irq_unmask,
rda_gpio->irq_chip.irq_set_type = rda_gpio_irq_set_type,
rda_gpio->irq_chip.flags = IRQCHIP_SKIP_SET_WAKE,
girq = &rda_gpio->chip.irq;
girq->chip = &rda_gpio->irq_chip;
girq->handler = handle_bad_irq;
girq->default_type = IRQ_TYPE_NONE;
girq->parent_handler = rda_gpio_irq_handler;
girq->parent_handler_data = rda_gpio;
girq->num_parents = 1;
girq->parents = devm_kcalloc(dev, 1,
sizeof(*girq->parents),
GFP_KERNEL);
if (!girq->parents)
return -ENOMEM;
girq->parents[0] = rda_gpio->irq;
}
platform_set_drvdata(pdev, rda_gpio);
return devm_gpiochip_add_data(dev, &rda_gpio->chip, rda_gpio);
}
static const struct of_device_id rda_gpio_of_match[] = {
{ .compatible = "rda,8810pl-gpio", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, rda_gpio_of_match);
static struct platform_driver rda_gpio_driver = {
.probe = rda_gpio_probe,
.driver = {
.name = "rda-gpio",
.of_match_table = rda_gpio_of_match,
},
};
module_platform_driver_probe(rda_gpio_driver, rda_gpio_probe);
MODULE_DESCRIPTION("RDA Micro GPIO driver");
MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
MODULE_LICENSE("GPL v2");