linux/drivers/mtd/nand
Rafał Miłecki 06f384c901 mtd: nand: read ECC algorithm from the new field
Now we have all drivers properly setting this new field we can start
using it. For a very short period of time we should support both values:
NAND_ECC_SOFT and NAND_ECC_SOFT_BCH treating them the same. It's because
of_get_nand_ecc_mode may still be setting NAND_ECC_SOFT_BCH.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-05-05 23:55:10 +02:00
..
bcm47xxnflash mtd: nand: make use of nand_set/get_controller_data() helpers 2016-01-07 10:23:41 -08:00
brcmnand mtd: nand: brcm: switch to mtd_ooblayout_ops 2016-05-05 23:51:38 +02:00
gpmi-nand mtd: nand: gpmi: rely on generic DT parsing done in nand_scan_ident() 2016-05-05 23:51:57 +02:00
ams-delta.c mtd: nand: ams-delta: set ECC algorithm explicitly 2016-04-19 22:05:31 +02:00
atmel_nand_ecc.h mtd: atmel_nand: Support 32-bit ECC strength 2016-02-12 10:27:48 -08:00
atmel_nand_nfc.h mtd: atmel_nand: Support variable RB_EDGE interrupts 2016-02-12 10:27:46 -08:00
atmel_nand.c mtd: nand: atmel: set ECC algorithm explicitly 2016-05-05 23:52:03 +02:00
au1550nd.c mtd: nand: au1550nd: set ECC algorithm explicitly 2016-05-05 23:51:53 +02:00
bf5xx_nand.c mtd: nand: bf5xx: set ECC algorithm explicitly 2016-05-05 23:52:02 +02:00
cafe_nand.c mtd: nand: cafe: switch to mtd_ooblayout_ops 2016-05-05 23:51:39 +02:00
cmx270_nand.c mtd: nand: cmx270: set ECC algorithm explicitly 2016-05-05 23:51:54 +02:00
cs553x_nand.c mtd: nand: remove useless mtd->priv = chip assignments 2015-12-18 13:21:40 -08:00
davinci_nand.c mtd: nand: davinci: set ECC algorithm explicitly 2016-05-05 23:52:02 +02:00
denali_dt.c mtd: nand: drop owner assignment from platform_drivers 2014-10-20 16:20:58 +02:00
denali_pci.c mtd: denali_pci: switch to dev_err() 2015-08-18 17:21:37 -07:00
denali.c mtd: nand: denali: switch to mtd_ooblayout_ops 2016-05-05 23:51:40 +02:00
denali.h mtd: nand: denali: use the mtd instance embedded in struct nand_chip 2015-12-18 13:13:50 -08:00
diskonchip.c mtd: nand: diskonchip: switch to mtd_ooblayout_ops 2016-05-05 23:51:40 +02:00
docg4.c mtd: nand: docg4: switch to mtd_ooblayout_ops 2016-05-05 23:51:41 +02:00
fsl_elbc_nand.c mtd: nand: fsl_elbc: set ECC algorithm explicitly 2016-05-05 23:51:55 +02:00
fsl_ifc_nand.c mtd: nand: fsl_ifc: set ECC algorithm explicitly 2016-05-05 23:51:55 +02:00
fsl_upm.c mtd: nand: fsl_upm: set ECC algorithm explicitly 2016-05-05 23:51:54 +02:00
fsmc_nand.c mtd: nand: fsmc: validate ECC setup by checking algorithm directly 2016-05-05 23:52:05 +02:00
gpio.c mtd: nand: gpio: set ECC algorithm explicitly 2016-04-19 22:05:31 +02:00
hisi504_nand.c mtd: nand: hisi504: rely on generic DT parsing done in nand_scan_ident() 2016-05-05 23:51:58 +02:00
jz4740_nand.c mtd: nand: jz4740: Remove unused local variable 2016-05-05 23:51:56 +02:00
jz4780_bch.c mtd: nand: jz4780: fixup, device structure assigned at probe 2016-04-19 22:04:50 +02:00
jz4780_bch.h mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs 2016-01-07 09:35:11 -08:00
jz4780_nand.c mtd: nand: jz4780: switch to mtd_ooblayout_ops 2016-05-05 23:51:44 +02:00
Kconfig mtd: nand: Qualcomm NAND controller driver 2016-03-10 11:02:17 -08:00
lpc32xx_mlc.c mtd: nand: lpc32xx: switch to mtd_ooblayout_ops 2016-05-05 23:51:45 +02:00
lpc32xx_slc.c mtd: nand: lpc32xx: rely on generic DT parsing done in nand_scan_ident() 2016-05-05 23:51:58 +02:00
Makefile mtd: nand: Qualcomm NAND controller driver 2016-03-10 11:02:17 -08:00
mpc5121_nfc.c mtd: nand: mpc5121_nfc: set ECC algorithm explicitly 2016-05-05 23:51:53 +02:00
mxc_nand.c mtd: nand: mxc: rely on generic DT parsing done in nand_scan_ident() 2016-05-05 23:51:59 +02:00
nand_base.c mtd: nand: read ECC algorithm from the new field 2016-05-05 23:55:10 +02:00
nand_bbt.c mtd: nand: remove EXPORT_SYMBOL of nand_scan_bbt() 2016-01-23 14:00:14 -08:00
nand_bch.c mtd: nand: kill the ecc->layout field 2016-05-05 23:51:50 +02:00
nand_ecc.c mtd: nand: return consistent error codes in ecc.correct() implementations 2016-01-06 18:45:46 -08:00
nand_ids.c mtd: nand: add NAND_NEED_SCRAMBLING flag to the H27UCG8T2ATR-BC definition 2016-01-22 16:36:54 -08:00
nand_timings.c mtd: nand: Use ULL-suffix for big u64 constant 2014-08-19 11:53:09 -07:00
nandsim.c mtd: nandsim: add __init attribute 2016-05-05 23:52:00 +02:00
ndfc.c mtd: nand: make use of nand_set/get_controller_data() helpers 2016-01-07 10:23:41 -08:00
nuc900_nand.c mtd: nand: nuc900: set ECC algorithm explicitly 2016-04-19 22:05:32 +02:00
omap2.c mtd: nand: omap2: Fix high memory dma prefetch transfer 2016-05-05 23:52:01 +02:00
omap_elm.c mtd: omap_elm: print interrupt resource using %pr 2015-12-18 10:16:17 -08:00
orion_nand.c mtd: nand: orion: set ECC algorithm explicitly 2016-04-19 22:05:33 +02:00
pasemi_nand.c mtd: nand: pasemi: switch to dev_* printing functions 2016-04-19 22:05:35 +02:00
plat_nand.c mtd: nand: plat: set ECC algorithm explicitly 2016-04-19 22:05:34 +02:00
pxa3xx_nand.c mtd: nand: pxa3xx: switch to mtd_ooblayout_ops 2016-05-05 23:51:46 +02:00
qcom_nandc.c mtd: nand: qcom: switch to mtd_ooblayout_ops 2016-05-05 23:51:49 +02:00
r852.c mtd: nand: make use of nand_set/get_controller_data() helpers 2016-01-07 10:23:41 -08:00
r852.h mtd: nand: r852: use the mtd instance embedded in struct nand_chip 2015-12-18 10:54:41 -08:00
s3c2410.c mtd: nand: s3c2410: set ECC algorithm explicitly 2016-05-05 23:51:52 +02:00
sh_flctl.c mtd: nand: sh_flctl: rely on generic DT parsing done in nand_scan_ident() 2016-05-05 23:51:59 +02:00
sharpsl.c mtd: nand: sharpsl: switch to mtd_ooblayout_ops 2016-05-05 23:51:36 +02:00
sm_common.c mtd: nand: sm_common: switch to mtd_ooblayout_ops 2016-05-05 23:51:48 +02:00
sm_common.h mtd: use __packed shorthand 2014-08-19 11:53:08 -07:00
socrates_nand.c mtd: nand: socrates: set ECC algorithm explicitly 2016-04-19 22:05:35 +02:00
sunxi_nand.c mtd: nand: sunxi: switch to mtd_ooblayout_ops 2016-05-05 23:51:48 +02:00
tmio_nand.c mtd: nand: remove useless mtd->priv = chip assignments 2015-12-18 13:21:40 -08:00
txx9ndfmc.c mtd: nand: make use of nand_set/get_controller_data() helpers 2016-01-07 10:23:41 -08:00
vf610_nfc.c mtd: nand: vf610: switch to mtd_ooblayout_ops 2016-05-05 23:51:48 +02:00
xway_nand.c mtd: nand: make use of mtd_to_nand() in NAND drivers 2015-12-08 12:24:36 -08:00