linux/Documentation/powerpc/cxl.txt

Coherent Accelerator Interface (CXL)
====================================

Introduction
============

    The coherent accelerator interface is designed to allow the
    coherent connection of accelerators (FPGAs and other devices) to a
    POWER system. These devices need to adhere to the Coherent
    Accelerator Interface Architecture (CAIA).

    IBM refers to this as the Coherent Accelerator Processor Interface
    or CAPI. In the kernel it's referred to by the name CXL to avoid
    confusion with the ISDN CAPI subsystem.

    Coherent in this context means that the accelerator and CPUs can
    both access system memory directly and with the same effective
    addresses.


Hardware overview
=================

         POWER8/9             FPGA
       +----------+        +---------+
       |          |        |         |
       |   CPU    |        |   AFU   |
       |          |        |         |
       |          |        |         |
       |          |        |         |
       +----------+        +---------+
       |   PHB    |        |         |
       |   +------+        |   PSL   |
       |   | CAPP |<------>|         |
       +---+------+  PCIE  +---------+

    The POWER8/9 chip has a Coherently Attached Processor Proxy (CAPP)
    unit which is part of the PCIe Host Bridge (PHB). This is managed
    by Linux by calls into OPAL. Linux doesn't directly program the
    CAPP.

    The FPGA (or coherently attached device) consists of two parts.
    The POWER Service Layer (PSL) and the Accelerator Function Unit
    (AFU). The AFU is used to implement specific functionality behind
    the PSL. The PSL, among other things, provides memory address
    translation services to allow each AFU direct access to userspace
    memory.

    The AFU is the core part of the accelerator (eg. the compression,
    crypto etc function). The kernel has no knowledge of the function
    of the AFU. Only userspace interacts directly with the AFU.

    The PSL provides the translation and interrupt services that the
    AFU needs. This is what the kernel interacts with. For example, if
    the AFU needs to read a particular effective address, it sends
    that address to the PSL, the PSL then translates it, fetches the
    data from memory and returns it to the AFU. If the PSL has a
    translation miss, it interrupts the kernel and the kernel services
    the fault. The context to which this fault is serviced is based on
    who owns that acceleration function.

    POWER8 <-----> PSL Version 8 is compliant to the CAIA Version 1.0.
    POWER9 <-----> PSL Version 9 is compliant to the CAIA Version 2.0.
    This PSL Version 9 provides new features such as:
    * Interaction with the nest MMU on the P9 chip.
    * Native DMA support.
    * Supports sending ASB_Notify messages for host thread wakeup.
    * Supports Atomic operations.
    * ....

    Cards with a PSL9 won't work on a POWER8 system and cards with a
    PSL8 won't work on a POWER9 system.

AFU Modes
=========

    There are two programming modes supported by the AFU. Dedicated
    and AFU directed. AFU may support one or both modes.

    When using dedicated mode only one MMU context is supported. In
    this mode, only one userspace process can use the accelerator at
    time.

    When using AFU directed mode, up to 16K simultaneous contexts can
    be supported. This means up to 16K simultaneous userspace
    applications may use the accelerator (although specific AFUs may
    support fewer). In this mode, the AFU sends a 16 bit context ID
    with each of its requests. This tells the PSL which context is
    associated with each operation. If the PSL can't translate an
    operation, the ID can also be accessed by the kernel so it can
    determine the userspace context associated with an operation.


MMIO space
==========

    A portion of the accelerator MMIO space can be directly mapped
    from the AFU to userspace. Either the whole space can be mapped or
    just a per context portion. The hardware is self describing, hence
    the kernel can determine the offset and size of the per context
    portion.


Interrupts
==========

    AFUs may generate interrupts that are destined for userspace. These
    are received by the kernel as hardware interrupts and passed onto
    userspace by a read syscall documented below.

    Data storage faults and error interrupts are handled by the kernel
    driver.


Work Element Descriptor (WED)
=============================

    The WED is a 64-bit parameter passed to the AFU when a context is
    started. Its format is up to the AFU hence the kernel has no
    knowledge of what it represents. Typically it will be the
    effective address of a work queue or status block where the AFU
    and userspace can share control and status information.




User API
========

1. AFU character devices

    For AFUs operating in AFU directed mode, two character device
    files will be created. /dev/cxl/afu0.0m will correspond to a
    master context and /dev/cxl/afu0.0s will correspond to a slave
    context. Master contexts have access to the full MMIO space an
    AFU provides. Slave contexts have access to only the per process
    MMIO space an AFU provides.

    For AFUs operating in dedicated process mode, the driver will
    only create a single character device per AFU called
    /dev/cxl/afu0.0d. This will have access to the entire MMIO space
    that the AFU provides (like master contexts in AFU directed).

    The types described below are defined in include/uapi/misc/cxl.h

    The following file operations are supported on both slave and
    master devices.

    A userspace library libcxl is available here:
	https://github.com/ibm-capi/libcxl
    This provides a C interface to this kernel API.

open
----

    Opens the device and allocates a file descriptor to be used with
    the rest of the API.

    A dedicated mode AFU only has one context and only allows the
    device to be opened once.

    An AFU directed mode AFU can have many contexts, the device can be
    opened once for each context that is available.

    When all available contexts are allocated the open call will fail
    and return -ENOSPC.

    Note: IRQs need to be allocated for each context, which may limit
          the number of contexts that can be created, and therefore
          how many times the device can be opened. The POWER8 CAPP
          supports 2040 IRQs and 3 are used by the kernel, so 2037 are
          left. If 1 IRQ is needed per context, then only 2037
          contexts can be allocated. If 4 IRQs are needed per context,
          then only 2037/4 = 509 contexts can be allocated.


ioctl
-----

    CXL_IOCTL_START_WORK:
        Starts the AFU context and associates it with the current
        process. Once this ioctl is successfully executed, all memory
        mapped into this process is accessible to this AFU context
        using the same effective addresses. No additional calls are
        required to map/unmap memory. The AFU memory context will be
        updated as userspace allocates and frees memory. This ioctl
        returns once the AFU context is started.

        Takes a pointer to a struct cxl_ioctl_start_work:

                struct cxl_ioctl_start_work {
                        __u64 flags;
                        __u64 work_element_descriptor;
                        __u64 amr;
                        __s16 num_interrupts;
                        __s16 reserved1;
                        __s32 reserved2;
                        __u64 reserved3;
                        __u64 reserved4;
                        __u64 reserved5;
                        __u64 reserved6;
                };

            flags:
                Indicates which optional fields in the structure are
                valid.

            work_element_descriptor:
                The Work Element Descriptor (WED) is a 64-bit argument
                defined by the AFU. Typically this is an effective
                address pointing to an AFU specific structure
                describing what work to perform.

            amr:
                Authority Mask Register (AMR), same as the powerpc
                AMR. This field is only used by the kernel when the
                corresponding CXL_START_WORK_AMR value is specified in
                flags. If not specified the kernel will use a default
                value of 0.

            num_interrupts:
                Number of userspace interrupts to request. This field
                is only used by the kernel when the corresponding
                CXL_START_WORK_NUM_IRQS value is specified in flags.
                If not specified the minimum number required by the
                AFU will be allocated. The min and max number can be
                obtained from sysfs.

            reserved fields:
                For ABI padding and future extensions

    CXL_IOCTL_GET_PROCESS_ELEMENT:
        Get the current context id, also known as the process element.
        The value is returned from the kernel as a __u32.


mmap
----

    An AFU may have an MMIO space to facilitate communication with the
    AFU. If it does, the MMIO space can be accessed via mmap. The size
    and contents of this area are specific to the particular AFU. The
    size can be discovered via sysfs.

    In AFU directed mode, master contexts are allowed to map all of
    the MMIO space and slave contexts are allowed to only map the per
    process MMIO space associated with the context. In dedicated
    process mode the entire MMIO space can always be mapped.

    This mmap call must be done after the START_WORK ioctl.

    Care should be taken when accessing MMIO space. Only 32 and 64-bit
    accesses are supported by POWER8. Also, the AFU will be designed
    with a specific endianness, so all MMIO accesses should consider
    endianness (recommend endian(3) variants like: le64toh(),
    be64toh() etc). These endian issues equally apply to shared memory
    queues the WED may describe.


read
----

    Reads events from the AFU. Blocks if no events are pending
    (unless O_NONBLOCK is supplied). Returns -EIO in the case of an
    unrecoverable error or if the card is removed.

    read() will always return an integral number of events.

    The buffer passed to read() must be at least 4K bytes.

    The result of the read will be a buffer of one or more events,
    each event is of type struct cxl_event, of varying size.

            struct cxl_event {
                    struct cxl_event_header header;
                    union {
                            struct cxl_event_afu_interrupt irq;
                            struct cxl_event_data_storage fault;
                            struct cxl_event_afu_error afu_error;
                    };
            };

    The struct cxl_event_header is defined as:

            struct cxl_event_header {
                    __u16 type;
                    __u16 size;
                    __u16 process_element;
                    __u16 reserved1;
            };

        type:
            This defines the type of event. The type determines how
            the rest of the event is structured. These types are
            described below and defined by enum cxl_event_type.

        size:
            This is the size of the event in bytes including the
            struct cxl_event_header. The start of the next event can
            be found at this offset from the start of the current
            event.

        process_element:
            Context ID of the event.

        reserved field:
            For future extensions and padding.

    If the event type is CXL_EVENT_AFU_INTERRUPT then the event
    structure is defined as:

            struct cxl_event_afu_interrupt {
                    __u16 flags;
                    __u16 irq; /* Raised AFU interrupt number */
                    __u32 reserved1;
            };

        flags:
            These flags indicate which optional fields are present
            in this struct. Currently all fields are mandatory.

        irq:
            The IRQ number sent by the AFU.

        reserved field:
            For future extensions and padding.

    If the event type is CXL_EVENT_DATA_STORAGE then the event
    structure is defined as:

            struct cxl_event_data_storage {
                    __u16 flags;
                    __u16 reserved1;
                    __u32 reserved2;
                    __u64 addr;
                    __u64 dsisr;
                    __u64 reserved3;
            };

        flags:
            These flags indicate which optional fields are present in
            this struct. Currently all fields are mandatory.

        address:
            The address that the AFU unsuccessfully attempted to
            access. Valid accesses will be handled transparently by the
            kernel but invalid accesses will generate this event.

        dsisr:
            This field gives information on the type of fault. It is a
            copy of the DSISR from the PSL hardware when the address
            fault occurred. The form of the DSISR is as defined in the
            CAIA.

        reserved fields:
            For future extensions

    If the event type is CXL_EVENT_AFU_ERROR then the event structure
    is defined as:

            struct cxl_event_afu_error {
                    __u16 flags;
                    __u16 reserved1;
                    __u32 reserved2;
                    __u64 error;
            };

        flags:
            These flags indicate which optional fields are present in
            this struct. Currently all fields are Mandatory.

        error:
            Error status from the AFU. Defined by the AFU.

        reserved fields:
            For future extensions and padding


2. Card character device (powerVM guest only)

    In a powerVM guest, an extra character device is created for the
    card. The device is only used to write (flash) a new image on the
    FPGA accelerator. Once the image is written and verified, the
    device tree is updated and the card is reset to reload the updated
    image.

open
----

    Opens the device and allocates a file descriptor to be used with
    the rest of the API. The device can only be opened once.

ioctl
-----

CXL_IOCTL_DOWNLOAD_IMAGE:
CXL_IOCTL_VALIDATE_IMAGE:
    Starts and controls flashing a new FPGA image. Partial
    reconfiguration is not supported (yet), so the image must contain
    a copy of the PSL and AFU(s). Since an image can be quite large,
    the caller may have to iterate, splitting the image in smaller
    chunks.

    Takes a pointer to a struct cxl_adapter_image:
        struct cxl_adapter_image {
            __u64 flags;
            __u64 data;
            __u64 len_data;
            __u64 len_image;
            __u64 reserved1;
            __u64 reserved2;
            __u64 reserved3;
            __u64 reserved4;
        };

    flags:
        These flags indicate which optional fields are present in
        this struct. Currently all fields are mandatory.

    data:
        Pointer to a buffer with part of the image to write to the
        card.

    len_data:
        Size of the buffer pointed to by data.

    len_image:
        Full size of the image.


Sysfs Class
===========

    A cxl sysfs class is added under /sys/class/cxl to facilitate
    enumeration and tuning of the accelerators. Its layout is
    described in Documentation/ABI/testing/sysfs-class-cxl


Udev rules
==========

    The following udev rules could be used to create a symlink to the
    most logical chardev to use in any programming mode (afuX.Yd for
    dedicated, afuX.Ys for afu directed), since the API is virtually
    identical for each:

	SUBSYSTEM=="cxl", ATTRS{mode}=="dedicated_process", SYMLINK="cxl/%b"
	SUBSYSTEM=="cxl", ATTRS{mode}=="afu_directed", \
	                  KERNEL=="afu[0-9]*.[0-9]*s", SYMLINK="cxl/%b"