mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 05:24:47 +08:00
faeeb317a5
People are using bonding over Infiniband IPoIB connections, and who knows
what else. Infiniband has a hardware address length of 20 octets
(INFINIBAND_ALEN), and the network core defines a MAX_ADDR_LEN of 32.
Various places in the bonding code are currently hard-wired to 6 octets
(ETH_ALEN), such as the 3ad code, which I've left untouched here. Besides,
only alb is currently possible on Infiniband links right now anyway, due
to commit 1533e77315
, so the alb code is where most of the changes are.
One major component of this change is the addition of a bond_hw_addr_copy
function that takes a length argument, instead of using ether_addr_copy
everywhere that hardware addresses need to be copied about. The other
major component of this change is converting the bonding code from using
struct sockaddr for address storage to struct sockaddr_storage, as the
former has an address storage space of only 14, while the latter is 128
minus a few, which is necessary to support bonding over device with up to
MAX_ADDR_LEN octet hardware addresses. Additionally, this probably fixes
up some memory corruption issues with the current code, where it's
possible to write an infiniband hardware address into a sockaddr declared
on the stack.
Lightly tested on a dual mlx4 IPoIB setup, which properly shows a 20-octet
hardware address now:
$ cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: fault-tolerance (active-backup) (fail_over_mac active)
Primary Slave: mlx4_ib0 (primary_reselect always)
Currently Active Slave: mlx4_ib0
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 100
Down Delay (ms): 100
Slave Interface: mlx4_ib0
MII Status: up
Speed: Unknown
Duplex: Unknown
Link Failure Count: 0
Permanent HW addr:
80:00:02:08:fe:80:00:00:00:00:00:00:e4:1d:2d:03:00:1d:67:01
Slave queue ID: 0
Slave Interface: mlx4_ib1
MII Status: up
Speed: Unknown
Duplex: Unknown
Link Failure Count: 0
Permanent HW addr:
80:00:02:09:fe:80:00:00:00:00:00:01:e4:1d:2d:03:00:1d:67:02
Slave queue ID: 0
Also tested with a standard 1Gbps NIC bonding setup (with a mix of
e1000 and e1000e cards), running LNST's bonding tests.
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
334 lines
9.1 KiB
C
334 lines
9.1 KiB
C
#include <linux/proc_fs.h>
|
|
#include <linux/export.h>
|
|
#include <net/net_namespace.h>
|
|
#include <net/netns/generic.h>
|
|
#include <net/bonding.h>
|
|
|
|
#include "bonding_priv.h"
|
|
|
|
static void *bond_info_seq_start(struct seq_file *seq, loff_t *pos)
|
|
__acquires(RCU)
|
|
{
|
|
struct bonding *bond = seq->private;
|
|
struct list_head *iter;
|
|
struct slave *slave;
|
|
loff_t off = 0;
|
|
|
|
rcu_read_lock();
|
|
|
|
if (*pos == 0)
|
|
return SEQ_START_TOKEN;
|
|
|
|
bond_for_each_slave_rcu(bond, slave, iter)
|
|
if (++off == *pos)
|
|
return slave;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void *bond_info_seq_next(struct seq_file *seq, void *v, loff_t *pos)
|
|
{
|
|
struct bonding *bond = seq->private;
|
|
struct list_head *iter;
|
|
struct slave *slave;
|
|
bool found = false;
|
|
|
|
++*pos;
|
|
if (v == SEQ_START_TOKEN)
|
|
return bond_first_slave_rcu(bond);
|
|
|
|
bond_for_each_slave_rcu(bond, slave, iter) {
|
|
if (found)
|
|
return slave;
|
|
if (slave == v)
|
|
found = true;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void bond_info_seq_stop(struct seq_file *seq, void *v)
|
|
__releases(RCU)
|
|
{
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
static void bond_info_show_master(struct seq_file *seq)
|
|
{
|
|
struct bonding *bond = seq->private;
|
|
const struct bond_opt_value *optval;
|
|
struct slave *curr, *primary;
|
|
int i;
|
|
|
|
curr = rcu_dereference(bond->curr_active_slave);
|
|
|
|
seq_printf(seq, "Bonding Mode: %s",
|
|
bond_mode_name(BOND_MODE(bond)));
|
|
|
|
if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP &&
|
|
bond->params.fail_over_mac) {
|
|
optval = bond_opt_get_val(BOND_OPT_FAIL_OVER_MAC,
|
|
bond->params.fail_over_mac);
|
|
seq_printf(seq, " (fail_over_mac %s)", optval->string);
|
|
}
|
|
|
|
seq_printf(seq, "\n");
|
|
|
|
if (bond_mode_uses_xmit_hash(bond)) {
|
|
optval = bond_opt_get_val(BOND_OPT_XMIT_HASH,
|
|
bond->params.xmit_policy);
|
|
seq_printf(seq, "Transmit Hash Policy: %s (%d)\n",
|
|
optval->string, bond->params.xmit_policy);
|
|
}
|
|
|
|
if (bond_uses_primary(bond)) {
|
|
primary = rcu_dereference(bond->primary_slave);
|
|
seq_printf(seq, "Primary Slave: %s",
|
|
primary ? primary->dev->name : "None");
|
|
if (primary) {
|
|
optval = bond_opt_get_val(BOND_OPT_PRIMARY_RESELECT,
|
|
bond->params.primary_reselect);
|
|
seq_printf(seq, " (primary_reselect %s)",
|
|
optval->string);
|
|
}
|
|
|
|
seq_printf(seq, "\nCurrently Active Slave: %s\n",
|
|
(curr) ? curr->dev->name : "None");
|
|
}
|
|
|
|
seq_printf(seq, "MII Status: %s\n", netif_carrier_ok(bond->dev) ?
|
|
"up" : "down");
|
|
seq_printf(seq, "MII Polling Interval (ms): %d\n", bond->params.miimon);
|
|
seq_printf(seq, "Up Delay (ms): %d\n",
|
|
bond->params.updelay * bond->params.miimon);
|
|
seq_printf(seq, "Down Delay (ms): %d\n",
|
|
bond->params.downdelay * bond->params.miimon);
|
|
|
|
|
|
/* ARP information */
|
|
if (bond->params.arp_interval > 0) {
|
|
int printed = 0;
|
|
seq_printf(seq, "ARP Polling Interval (ms): %d\n",
|
|
bond->params.arp_interval);
|
|
|
|
seq_printf(seq, "ARP IP target/s (n.n.n.n form):");
|
|
|
|
for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
|
|
if (!bond->params.arp_targets[i])
|
|
break;
|
|
if (printed)
|
|
seq_printf(seq, ",");
|
|
seq_printf(seq, " %pI4", &bond->params.arp_targets[i]);
|
|
printed = 1;
|
|
}
|
|
seq_printf(seq, "\n");
|
|
}
|
|
|
|
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
|
|
struct ad_info ad_info;
|
|
|
|
seq_puts(seq, "\n802.3ad info\n");
|
|
seq_printf(seq, "LACP rate: %s\n",
|
|
(bond->params.lacp_fast) ? "fast" : "slow");
|
|
seq_printf(seq, "Min links: %d\n", bond->params.min_links);
|
|
optval = bond_opt_get_val(BOND_OPT_AD_SELECT,
|
|
bond->params.ad_select);
|
|
seq_printf(seq, "Aggregator selection policy (ad_select): %s\n",
|
|
optval->string);
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
seq_printf(seq, "System priority: %d\n",
|
|
BOND_AD_INFO(bond).system.sys_priority);
|
|
seq_printf(seq, "System MAC address: %pM\n",
|
|
&BOND_AD_INFO(bond).system.sys_mac_addr);
|
|
|
|
if (__bond_3ad_get_active_agg_info(bond, &ad_info)) {
|
|
seq_printf(seq,
|
|
"bond %s has no active aggregator\n",
|
|
bond->dev->name);
|
|
} else {
|
|
seq_printf(seq, "Active Aggregator Info:\n");
|
|
|
|
seq_printf(seq, "\tAggregator ID: %d\n",
|
|
ad_info.aggregator_id);
|
|
seq_printf(seq, "\tNumber of ports: %d\n",
|
|
ad_info.ports);
|
|
seq_printf(seq, "\tActor Key: %d\n",
|
|
ad_info.actor_key);
|
|
seq_printf(seq, "\tPartner Key: %d\n",
|
|
ad_info.partner_key);
|
|
seq_printf(seq, "\tPartner Mac Address: %pM\n",
|
|
ad_info.partner_system);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bond_info_show_slave(struct seq_file *seq,
|
|
const struct slave *slave)
|
|
{
|
|
struct bonding *bond = seq->private;
|
|
|
|
seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name);
|
|
seq_printf(seq, "MII Status: %s\n", bond_slave_link_status(slave->link));
|
|
if (slave->speed == SPEED_UNKNOWN)
|
|
seq_printf(seq, "Speed: %s\n", "Unknown");
|
|
else
|
|
seq_printf(seq, "Speed: %d Mbps\n", slave->speed);
|
|
|
|
if (slave->duplex == DUPLEX_UNKNOWN)
|
|
seq_printf(seq, "Duplex: %s\n", "Unknown");
|
|
else
|
|
seq_printf(seq, "Duplex: %s\n", slave->duplex ? "full" : "half");
|
|
|
|
seq_printf(seq, "Link Failure Count: %u\n",
|
|
slave->link_failure_count);
|
|
|
|
seq_printf(seq, "Permanent HW addr: %*phC\n",
|
|
slave->dev->addr_len, slave->perm_hwaddr);
|
|
seq_printf(seq, "Slave queue ID: %d\n", slave->queue_id);
|
|
|
|
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
|
|
const struct port *port = &SLAVE_AD_INFO(slave)->port;
|
|
const struct aggregator *agg = port->aggregator;
|
|
|
|
if (agg) {
|
|
seq_printf(seq, "Aggregator ID: %d\n",
|
|
agg->aggregator_identifier);
|
|
seq_printf(seq, "Actor Churn State: %s\n",
|
|
bond_3ad_churn_desc(port->sm_churn_actor_state));
|
|
seq_printf(seq, "Partner Churn State: %s\n",
|
|
bond_3ad_churn_desc(port->sm_churn_partner_state));
|
|
seq_printf(seq, "Actor Churned Count: %d\n",
|
|
port->churn_actor_count);
|
|
seq_printf(seq, "Partner Churned Count: %d\n",
|
|
port->churn_partner_count);
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
seq_puts(seq, "details actor lacp pdu:\n");
|
|
seq_printf(seq, " system priority: %d\n",
|
|
port->actor_system_priority);
|
|
seq_printf(seq, " system mac address: %pM\n",
|
|
&port->actor_system);
|
|
seq_printf(seq, " port key: %d\n",
|
|
port->actor_oper_port_key);
|
|
seq_printf(seq, " port priority: %d\n",
|
|
port->actor_port_priority);
|
|
seq_printf(seq, " port number: %d\n",
|
|
port->actor_port_number);
|
|
seq_printf(seq, " port state: %d\n",
|
|
port->actor_oper_port_state);
|
|
|
|
seq_puts(seq, "details partner lacp pdu:\n");
|
|
seq_printf(seq, " system priority: %d\n",
|
|
port->partner_oper.system_priority);
|
|
seq_printf(seq, " system mac address: %pM\n",
|
|
&port->partner_oper.system);
|
|
seq_printf(seq, " oper key: %d\n",
|
|
port->partner_oper.key);
|
|
seq_printf(seq, " port priority: %d\n",
|
|
port->partner_oper.port_priority);
|
|
seq_printf(seq, " port number: %d\n",
|
|
port->partner_oper.port_number);
|
|
seq_printf(seq, " port state: %d\n",
|
|
port->partner_oper.port_state);
|
|
}
|
|
} else {
|
|
seq_puts(seq, "Aggregator ID: N/A\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
static int bond_info_seq_show(struct seq_file *seq, void *v)
|
|
{
|
|
if (v == SEQ_START_TOKEN) {
|
|
seq_printf(seq, "%s\n", bond_version);
|
|
bond_info_show_master(seq);
|
|
} else
|
|
bond_info_show_slave(seq, v);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct seq_operations bond_info_seq_ops = {
|
|
.start = bond_info_seq_start,
|
|
.next = bond_info_seq_next,
|
|
.stop = bond_info_seq_stop,
|
|
.show = bond_info_seq_show,
|
|
};
|
|
|
|
static int bond_info_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct seq_file *seq;
|
|
int res;
|
|
|
|
res = seq_open(file, &bond_info_seq_ops);
|
|
if (!res) {
|
|
/* recover the pointer buried in proc_dir_entry data */
|
|
seq = file->private_data;
|
|
seq->private = PDE_DATA(inode);
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
static const struct file_operations bond_info_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = bond_info_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = seq_release,
|
|
};
|
|
|
|
void bond_create_proc_entry(struct bonding *bond)
|
|
{
|
|
struct net_device *bond_dev = bond->dev;
|
|
struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
|
|
|
|
if (bn->proc_dir) {
|
|
bond->proc_entry = proc_create_data(bond_dev->name,
|
|
S_IRUGO, bn->proc_dir,
|
|
&bond_info_fops, bond);
|
|
if (bond->proc_entry == NULL)
|
|
netdev_warn(bond_dev, "Cannot create /proc/net/%s/%s\n",
|
|
DRV_NAME, bond_dev->name);
|
|
else
|
|
memcpy(bond->proc_file_name, bond_dev->name, IFNAMSIZ);
|
|
}
|
|
}
|
|
|
|
void bond_remove_proc_entry(struct bonding *bond)
|
|
{
|
|
struct net_device *bond_dev = bond->dev;
|
|
struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
|
|
|
|
if (bn->proc_dir && bond->proc_entry) {
|
|
remove_proc_entry(bond->proc_file_name, bn->proc_dir);
|
|
memset(bond->proc_file_name, 0, IFNAMSIZ);
|
|
bond->proc_entry = NULL;
|
|
}
|
|
}
|
|
|
|
/* Create the bonding directory under /proc/net, if doesn't exist yet.
|
|
* Caller must hold rtnl_lock.
|
|
*/
|
|
void __net_init bond_create_proc_dir(struct bond_net *bn)
|
|
{
|
|
if (!bn->proc_dir) {
|
|
bn->proc_dir = proc_mkdir(DRV_NAME, bn->net->proc_net);
|
|
if (!bn->proc_dir)
|
|
pr_warn("Warning: Cannot create /proc/net/%s\n",
|
|
DRV_NAME);
|
|
}
|
|
}
|
|
|
|
/* Destroy the bonding directory under /proc/net, if empty.
|
|
* Caller must hold rtnl_lock.
|
|
*/
|
|
void __net_exit bond_destroy_proc_dir(struct bond_net *bn)
|
|
{
|
|
if (bn->proc_dir) {
|
|
remove_proc_entry(DRV_NAME, bn->net->proc_net);
|
|
bn->proc_dir = NULL;
|
|
}
|
|
}
|