linux/sound/soc/codecs/rt5682-i2c.c
Shuming Fan 542712826f
ASoC: rt5682: add delay time of workqueue to control next IRQ event
This patch keeps the delay time (50 ms) for jack detection and zero delay time for the button press.
This patch improves the reaction of the button press.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210309085827.32032-1-shumingf@realtek.com
Tested-by Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10 13:14:34 +00:00

316 lines
8.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
//
// rt5682.c -- RT5682 ALSA SoC audio component driver
//
// Copyright 2018 Realtek Semiconductor Corp.
// Author: Bard Liao <bardliao@realtek.com>
//
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/acpi.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/jack.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <sound/rt5682.h>
#include "rl6231.h"
#include "rt5682.h"
static const struct rt5682_platform_data i2s_default_platform_data = {
.dmic1_data_pin = RT5682_DMIC1_DATA_GPIO2,
.dmic1_clk_pin = RT5682_DMIC1_CLK_GPIO3,
.jd_src = RT5682_JD1,
.btndet_delay = 16,
.dai_clk_names[RT5682_DAI_WCLK_IDX] = "rt5682-dai-wclk",
.dai_clk_names[RT5682_DAI_BCLK_IDX] = "rt5682-dai-bclk",
};
static const struct regmap_config rt5682_regmap = {
.reg_bits = 16,
.val_bits = 16,
.max_register = RT5682_I2C_MODE,
.volatile_reg = rt5682_volatile_register,
.readable_reg = rt5682_readable_register,
.cache_type = REGCACHE_RBTREE,
.reg_defaults = rt5682_reg,
.num_reg_defaults = RT5682_REG_NUM,
.use_single_read = true,
.use_single_write = true,
};
static void rt5682_jd_check_handler(struct work_struct *work)
{
struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv,
jd_check_work.work);
if (snd_soc_component_read(rt5682->component, RT5682_AJD1_CTRL)
& RT5682_JDH_RS_MASK) {
/* jack out */
rt5682->jack_type = rt5682_headset_detect(rt5682->component, 0);
snd_soc_jack_report(rt5682->hs_jack, rt5682->jack_type,
SND_JACK_HEADSET |
SND_JACK_BTN_0 | SND_JACK_BTN_1 |
SND_JACK_BTN_2 | SND_JACK_BTN_3);
} else {
schedule_delayed_work(&rt5682->jd_check_work, 500);
}
}
static irqreturn_t rt5682_irq(int irq, void *data)
{
struct rt5682_priv *rt5682 = data;
mod_delayed_work(system_power_efficient_wq,
&rt5682->jack_detect_work, msecs_to_jiffies(rt5682->irq_work_delay_time));
return IRQ_HANDLED;
}
static struct snd_soc_dai_driver rt5682_dai[] = {
{
.name = "rt5682-aif1",
.id = RT5682_AIF1,
.playback = {
.stream_name = "AIF1 Playback",
.channels_min = 1,
.channels_max = 2,
.rates = RT5682_STEREO_RATES,
.formats = RT5682_FORMATS,
},
.capture = {
.stream_name = "AIF1 Capture",
.channels_min = 1,
.channels_max = 2,
.rates = RT5682_STEREO_RATES,
.formats = RT5682_FORMATS,
},
.ops = &rt5682_aif1_dai_ops,
},
{
.name = "rt5682-aif2",
.id = RT5682_AIF2,
.capture = {
.stream_name = "AIF2 Capture",
.channels_min = 1,
.channels_max = 2,
.rates = RT5682_STEREO_RATES,
.formats = RT5682_FORMATS,
},
.ops = &rt5682_aif2_dai_ops,
},
};
static int rt5682_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct rt5682_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct rt5682_priv *rt5682;
int i, ret;
unsigned int val;
rt5682 = devm_kzalloc(&i2c->dev, sizeof(struct rt5682_priv),
GFP_KERNEL);
if (!rt5682)
return -ENOMEM;
i2c_set_clientdata(i2c, rt5682);
rt5682->pdata = i2s_default_platform_data;
if (pdata)
rt5682->pdata = *pdata;
else
rt5682_parse_dt(rt5682, &i2c->dev);
rt5682->regmap = devm_regmap_init_i2c(i2c, &rt5682_regmap);
if (IS_ERR(rt5682->regmap)) {
ret = PTR_ERR(rt5682->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
for (i = 0; i < ARRAY_SIZE(rt5682->supplies); i++)
rt5682->supplies[i].supply = rt5682_supply_names[i];
ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5682->supplies),
rt5682->supplies);
if (ret) {
dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies),
rt5682->supplies);
if (ret) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
if (gpio_is_valid(rt5682->pdata.ldo1_en)) {
if (devm_gpio_request_one(&i2c->dev, rt5682->pdata.ldo1_en,
GPIOF_OUT_INIT_HIGH, "rt5682"))
dev_err(&i2c->dev, "Fail gpio_request gpio_ldo\n");
}
/* Sleep for 300 ms miniumum */
usleep_range(300000, 350000);
regmap_write(rt5682->regmap, RT5682_I2C_MODE, 0x1);
usleep_range(10000, 15000);
regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val);
if (val != DEVICE_ID) {
dev_err(&i2c->dev,
"Device with ID register %x is not rt5682\n", val);
return -ENODEV;
}
mutex_init(&rt5682->calibrate_mutex);
rt5682_calibrate(rt5682);
rt5682_apply_patch_list(rt5682, &i2c->dev);
regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000);
/* DMIC pin*/
if (rt5682->pdata.dmic1_data_pin != RT5682_DMIC1_NULL) {
switch (rt5682->pdata.dmic1_data_pin) {
case RT5682_DMIC1_DATA_GPIO2: /* share with LRCK2 */
regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1,
RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO2);
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
RT5682_GP2_PIN_MASK, RT5682_GP2_PIN_DMIC_SDA);
break;
case RT5682_DMIC1_DATA_GPIO5: /* share with DACDAT1 */
regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1,
RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO5);
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
RT5682_GP5_PIN_MASK, RT5682_GP5_PIN_DMIC_SDA);
break;
default:
dev_warn(&i2c->dev, "invalid DMIC_DAT pin\n");
break;
}
switch (rt5682->pdata.dmic1_clk_pin) {
case RT5682_DMIC1_CLK_GPIO1: /* share with IRQ */
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_DMIC_CLK);
break;
case RT5682_DMIC1_CLK_GPIO3: /* share with BCLK2 */
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
RT5682_GP3_PIN_MASK, RT5682_GP3_PIN_DMIC_CLK);
if (rt5682->pdata.dmic_clk_driving_high)
regmap_update_bits(rt5682->regmap,
RT5682_PAD_DRIVING_CTRL,
RT5682_PAD_DRV_GP3_MASK,
2 << RT5682_PAD_DRV_GP3_SFT);
break;
default:
dev_warn(&i2c->dev, "invalid DMIC_CLK pin\n");
break;
}
}
regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1,
RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK,
RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X);
regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0080);
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK,
RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1);
regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000);
regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8,
RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA);
regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1,
RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ);
regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1,
RT5682_PM_HP_MASK, RT5682_PM_HP_HV);
regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1,
RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2);
INIT_DELAYED_WORK(&rt5682->jack_detect_work,
rt5682_jack_detect_handler);
INIT_DELAYED_WORK(&rt5682->jd_check_work,
rt5682_jd_check_handler);
if (i2c->irq) {
ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
rt5682_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
| IRQF_ONESHOT, "rt5682", rt5682);
if (ret)
dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret);
}
return devm_snd_soc_register_component(&i2c->dev,
&rt5682_soc_component_dev,
rt5682_dai, ARRAY_SIZE(rt5682_dai));
}
static void rt5682_i2c_shutdown(struct i2c_client *client)
{
struct rt5682_priv *rt5682 = i2c_get_clientdata(client);
cancel_delayed_work_sync(&rt5682->jack_detect_work);
cancel_delayed_work_sync(&rt5682->jd_check_work);
rt5682_reset(rt5682);
}
static const struct of_device_id rt5682_of_match[] = {
{.compatible = "realtek,rt5682i"},
{},
};
MODULE_DEVICE_TABLE(of, rt5682_of_match);
static const struct acpi_device_id rt5682_acpi_match[] = {
{"10EC5682", 0,},
{},
};
MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match);
static const struct i2c_device_id rt5682_i2c_id[] = {
{"rt5682", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, rt5682_i2c_id);
static struct i2c_driver rt5682_i2c_driver = {
.driver = {
.name = "rt5682",
.of_match_table = rt5682_of_match,
.acpi_match_table = rt5682_acpi_match,
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
.probe = rt5682_i2c_probe,
.shutdown = rt5682_i2c_shutdown,
.id_table = rt5682_i2c_id,
};
module_i2c_driver(rt5682_i2c_driver);
MODULE_DESCRIPTION("ASoC RT5682 driver");
MODULE_AUTHOR("Bard Liao <bardliao@realtek.com>");
MODULE_LICENSE("GPL v2");