mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
80cd73094c
Add missing parameter (which happens to be ignored) Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210302205926.49063-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
777 lines
23 KiB
C
777 lines
23 KiB
C
/*
|
|
* CS4270 ALSA SoC (ASoC) codec driver
|
|
*
|
|
* Author: Timur Tabi <timur@freescale.com>
|
|
*
|
|
* Copyright 2007-2009 Freescale Semiconductor, Inc. This file is licensed
|
|
* under the terms of the GNU General Public License version 2. This
|
|
* program is licensed "as is" without any warranty of any kind, whether
|
|
* express or implied.
|
|
*
|
|
* This is an ASoC device driver for the Cirrus Logic CS4270 codec.
|
|
*
|
|
* Current features/limitations:
|
|
*
|
|
* - Software mode is supported. Stand-alone mode is not supported.
|
|
* - Only I2C is supported, not SPI
|
|
* - Support for master and slave mode
|
|
* - The machine driver's 'startup' function must call
|
|
* cs4270_set_dai_sysclk() with the value of MCLK.
|
|
* - Only I2S and left-justified modes are supported
|
|
* - Power management is supported
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <sound/core.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/initval.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/of_device.h>
|
|
|
|
/*
|
|
* The codec isn't really big-endian or little-endian, since the I2S
|
|
* interface requires data to be sent serially with the MSbit first.
|
|
* However, to support BE and LE I2S devices, we specify both here. That
|
|
* way, ALSA will always match the bit patterns.
|
|
*/
|
|
#define CS4270_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
|
|
SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | \
|
|
SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE | \
|
|
SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE | \
|
|
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | \
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE)
|
|
|
|
/* CS4270 registers addresses */
|
|
#define CS4270_CHIPID 0x01 /* Chip ID */
|
|
#define CS4270_PWRCTL 0x02 /* Power Control */
|
|
#define CS4270_MODE 0x03 /* Mode Control */
|
|
#define CS4270_FORMAT 0x04 /* Serial Format, ADC/DAC Control */
|
|
#define CS4270_TRANS 0x05 /* Transition Control */
|
|
#define CS4270_MUTE 0x06 /* Mute Control */
|
|
#define CS4270_VOLA 0x07 /* DAC Channel A Volume Control */
|
|
#define CS4270_VOLB 0x08 /* DAC Channel B Volume Control */
|
|
|
|
#define CS4270_FIRSTREG 0x01
|
|
#define CS4270_LASTREG 0x08
|
|
#define CS4270_NUMREGS (CS4270_LASTREG - CS4270_FIRSTREG + 1)
|
|
#define CS4270_I2C_INCR 0x80
|
|
|
|
/* Bit masks for the CS4270 registers */
|
|
#define CS4270_CHIPID_ID 0xF0
|
|
#define CS4270_CHIPID_REV 0x0F
|
|
#define CS4270_PWRCTL_FREEZE 0x80
|
|
#define CS4270_PWRCTL_PDN_ADC 0x20
|
|
#define CS4270_PWRCTL_PDN_DAC 0x02
|
|
#define CS4270_PWRCTL_PDN 0x01
|
|
#define CS4270_PWRCTL_PDN_ALL \
|
|
(CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC | CS4270_PWRCTL_PDN)
|
|
#define CS4270_MODE_SPEED_MASK 0x30
|
|
#define CS4270_MODE_1X 0x00
|
|
#define CS4270_MODE_2X 0x10
|
|
#define CS4270_MODE_4X 0x20
|
|
#define CS4270_MODE_SLAVE 0x30
|
|
#define CS4270_MODE_DIV_MASK 0x0E
|
|
#define CS4270_MODE_DIV1 0x00
|
|
#define CS4270_MODE_DIV15 0x02
|
|
#define CS4270_MODE_DIV2 0x04
|
|
#define CS4270_MODE_DIV3 0x06
|
|
#define CS4270_MODE_DIV4 0x08
|
|
#define CS4270_MODE_POPGUARD 0x01
|
|
#define CS4270_FORMAT_FREEZE_A 0x80
|
|
#define CS4270_FORMAT_FREEZE_B 0x40
|
|
#define CS4270_FORMAT_LOOPBACK 0x20
|
|
#define CS4270_FORMAT_DAC_MASK 0x18
|
|
#define CS4270_FORMAT_DAC_LJ 0x00
|
|
#define CS4270_FORMAT_DAC_I2S 0x08
|
|
#define CS4270_FORMAT_DAC_RJ16 0x18
|
|
#define CS4270_FORMAT_DAC_RJ24 0x10
|
|
#define CS4270_FORMAT_ADC_MASK 0x01
|
|
#define CS4270_FORMAT_ADC_LJ 0x00
|
|
#define CS4270_FORMAT_ADC_I2S 0x01
|
|
#define CS4270_TRANS_ONE_VOL 0x80
|
|
#define CS4270_TRANS_SOFT 0x40
|
|
#define CS4270_TRANS_ZERO 0x20
|
|
#define CS4270_TRANS_INV_ADC_A 0x08
|
|
#define CS4270_TRANS_INV_ADC_B 0x10
|
|
#define CS4270_TRANS_INV_DAC_A 0x02
|
|
#define CS4270_TRANS_INV_DAC_B 0x04
|
|
#define CS4270_TRANS_DEEMPH 0x01
|
|
#define CS4270_MUTE_AUTO 0x20
|
|
#define CS4270_MUTE_ADC_A 0x08
|
|
#define CS4270_MUTE_ADC_B 0x10
|
|
#define CS4270_MUTE_POLARITY 0x04
|
|
#define CS4270_MUTE_DAC_A 0x01
|
|
#define CS4270_MUTE_DAC_B 0x02
|
|
|
|
/* Power-on default values for the registers
|
|
*
|
|
* This array contains the power-on default values of the registers, with the
|
|
* exception of the "CHIPID" register (01h). The lower four bits of that
|
|
* register contain the hardware revision, so it is treated as volatile.
|
|
*/
|
|
static const struct reg_default cs4270_reg_defaults[] = {
|
|
{ 2, 0x00 },
|
|
{ 3, 0x30 },
|
|
{ 4, 0x00 },
|
|
{ 5, 0x60 },
|
|
{ 6, 0x20 },
|
|
{ 7, 0x00 },
|
|
{ 8, 0x00 },
|
|
};
|
|
|
|
static const char *supply_names[] = {
|
|
"va", "vd", "vlc"
|
|
};
|
|
|
|
/* Private data for the CS4270 */
|
|
struct cs4270_private {
|
|
struct regmap *regmap;
|
|
unsigned int mclk; /* Input frequency of the MCLK pin */
|
|
unsigned int mode; /* The mode (I2S or left-justified) */
|
|
unsigned int slave_mode;
|
|
unsigned int manual_mute;
|
|
|
|
/* power domain regulators */
|
|
struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
|
|
|
|
/* reset gpio */
|
|
struct gpio_desc *reset_gpio;
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget cs4270_dapm_widgets[] = {
|
|
SND_SOC_DAPM_INPUT("AINL"),
|
|
SND_SOC_DAPM_INPUT("AINR"),
|
|
|
|
SND_SOC_DAPM_OUTPUT("AOUTL"),
|
|
SND_SOC_DAPM_OUTPUT("AOUTR"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route cs4270_dapm_routes[] = {
|
|
{ "Capture", NULL, "AINL" },
|
|
{ "Capture", NULL, "AINR" },
|
|
|
|
{ "AOUTL", NULL, "Playback" },
|
|
{ "AOUTR", NULL, "Playback" },
|
|
};
|
|
|
|
/**
|
|
* struct cs4270_mode_ratios - clock ratio tables
|
|
* @ratio: the ratio of MCLK to the sample rate
|
|
* @speed_mode: the Speed Mode bits to set in the Mode Control register for
|
|
* this ratio
|
|
* @mclk: the Ratio Select bits to set in the Mode Control register for this
|
|
* ratio
|
|
*
|
|
* The data for this chart is taken from Table 5 of the CS4270 reference
|
|
* manual.
|
|
*
|
|
* This table is used to determine how to program the Mode Control register.
|
|
* It is also used by cs4270_set_dai_sysclk() to tell ALSA which sampling
|
|
* rates the CS4270 currently supports.
|
|
*
|
|
* @speed_mode is the corresponding bit pattern to be written to the
|
|
* MODE bits of the Mode Control Register
|
|
*
|
|
* @mclk is the corresponding bit pattern to be wirten to the MCLK bits of
|
|
* the Mode Control Register.
|
|
*
|
|
* In situations where a single ratio is represented by multiple speed
|
|
* modes, we favor the slowest speed. E.g, for a ratio of 128, we pick
|
|
* double-speed instead of quad-speed. However, the CS4270 errata states
|
|
* that divide-By-1.5 can cause failures, so we avoid that mode where
|
|
* possible.
|
|
*
|
|
* Errata: There is an errata for the CS4270 where divide-by-1.5 does not
|
|
* work if Vd is 3.3V. If this effects you, select the
|
|
* CONFIG_SND_SOC_CS4270_VD33_ERRATA Kconfig option, and the driver will
|
|
* never select any sample rates that require divide-by-1.5.
|
|
*/
|
|
struct cs4270_mode_ratios {
|
|
unsigned int ratio;
|
|
u8 speed_mode;
|
|
u8 mclk;
|
|
};
|
|
|
|
static struct cs4270_mode_ratios cs4270_mode_ratios[] = {
|
|
{64, CS4270_MODE_4X, CS4270_MODE_DIV1},
|
|
#ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA
|
|
{96, CS4270_MODE_4X, CS4270_MODE_DIV15},
|
|
#endif
|
|
{128, CS4270_MODE_2X, CS4270_MODE_DIV1},
|
|
{192, CS4270_MODE_4X, CS4270_MODE_DIV3},
|
|
{256, CS4270_MODE_1X, CS4270_MODE_DIV1},
|
|
{384, CS4270_MODE_2X, CS4270_MODE_DIV3},
|
|
{512, CS4270_MODE_1X, CS4270_MODE_DIV2},
|
|
{768, CS4270_MODE_1X, CS4270_MODE_DIV3},
|
|
{1024, CS4270_MODE_1X, CS4270_MODE_DIV4}
|
|
};
|
|
|
|
/* The number of MCLK/LRCK ratios supported by the CS4270 */
|
|
#define NUM_MCLK_RATIOS ARRAY_SIZE(cs4270_mode_ratios)
|
|
|
|
static bool cs4270_reg_is_readable(struct device *dev, unsigned int reg)
|
|
{
|
|
return (reg >= CS4270_FIRSTREG) && (reg <= CS4270_LASTREG);
|
|
}
|
|
|
|
static bool cs4270_reg_is_volatile(struct device *dev, unsigned int reg)
|
|
{
|
|
/* Unreadable registers are considered volatile */
|
|
if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG))
|
|
return true;
|
|
|
|
return reg == CS4270_CHIPID;
|
|
}
|
|
|
|
/**
|
|
* cs4270_set_dai_sysclk - determine the CS4270 samples rates.
|
|
* @codec_dai: the codec DAI
|
|
* @clk_id: the clock ID (ignored)
|
|
* @freq: the MCLK input frequency
|
|
* @dir: the clock direction (ignored)
|
|
*
|
|
* This function is used to tell the codec driver what the input MCLK
|
|
* frequency is.
|
|
*
|
|
* The value of MCLK is used to determine which sample rates are supported
|
|
* by the CS4270. The ratio of MCLK / Fs must be equal to one of nine
|
|
* supported values - 64, 96, 128, 192, 256, 384, 512, 768, and 1024.
|
|
*
|
|
* This function calculates the nine ratios and determines which ones match
|
|
* a standard sample rate. If there's a match, then it is added to the list
|
|
* of supported sample rates.
|
|
*
|
|
* This function must be called by the machine driver's 'startup' function,
|
|
* otherwise the list of supported sample rates will not be available in
|
|
* time for ALSA.
|
|
*
|
|
* For setups with variable MCLKs, pass 0 as 'freq' argument. This will cause
|
|
* theoretically possible sample rates to be enabled. Call it again with a
|
|
* proper value set one the external clock is set (most probably you would do
|
|
* that from a machine's driver 'hw_param' hook.
|
|
*/
|
|
static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
struct cs4270_private *cs4270 = snd_soc_component_get_drvdata(component);
|
|
|
|
cs4270->mclk = freq;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cs4270_set_dai_fmt - configure the codec for the selected audio format
|
|
* @codec_dai: the codec DAI
|
|
* @format: a SND_SOC_DAIFMT_x value indicating the data format
|
|
*
|
|
* This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the
|
|
* codec accordingly.
|
|
*
|
|
* Currently, this function only supports SND_SOC_DAIFMT_I2S and
|
|
* SND_SOC_DAIFMT_LEFT_J. The CS4270 codec also supports right-justified
|
|
* data for playback only, but ASoC currently does not support different
|
|
* formats for playback vs. record.
|
|
*/
|
|
static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int format)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
struct cs4270_private *cs4270 = snd_soc_component_get_drvdata(component);
|
|
|
|
/* set DAI format */
|
|
switch (format & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
cs4270->mode = format & SND_SOC_DAIFMT_FORMAT_MASK;
|
|
break;
|
|
default:
|
|
dev_err(component->dev, "invalid dai format\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* set master/slave audio interface */
|
|
switch (format & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
cs4270->slave_mode = 1;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
cs4270->slave_mode = 0;
|
|
break;
|
|
default:
|
|
/* all other modes are unsupported by the hardware */
|
|
dev_err(component->dev, "Unknown master/slave configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cs4270_hw_params - program the CS4270 with the given hardware parameters.
|
|
* @substream: the audio stream
|
|
* @params: the hardware parameters to set
|
|
* @dai: the SOC DAI (ignored)
|
|
*
|
|
* This function programs the hardware with the values provided.
|
|
* Specifically, the sample rate and the data format.
|
|
*
|
|
* The .ops functions are used to provide board-specific data, like input
|
|
* frequencies, to this driver. This function takes that information,
|
|
* combines it with the hardware parameters provided, and programs the
|
|
* hardware accordingly.
|
|
*/
|
|
static int cs4270_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct cs4270_private *cs4270 = snd_soc_component_get_drvdata(component);
|
|
int ret;
|
|
unsigned int i;
|
|
unsigned int rate;
|
|
unsigned int ratio;
|
|
int reg;
|
|
|
|
/* Figure out which MCLK/LRCK ratio to use */
|
|
|
|
rate = params_rate(params); /* Sampling rate, in Hz */
|
|
ratio = cs4270->mclk / rate; /* MCLK/LRCK ratio */
|
|
|
|
for (i = 0; i < NUM_MCLK_RATIOS; i++) {
|
|
if (cs4270_mode_ratios[i].ratio == ratio)
|
|
break;
|
|
}
|
|
|
|
if (i == NUM_MCLK_RATIOS) {
|
|
/* We did not find a matching ratio */
|
|
dev_err(component->dev, "could not find matching ratio\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set the sample rate */
|
|
|
|
reg = snd_soc_component_read(component, CS4270_MODE);
|
|
reg &= ~(CS4270_MODE_SPEED_MASK | CS4270_MODE_DIV_MASK);
|
|
reg |= cs4270_mode_ratios[i].mclk;
|
|
|
|
if (cs4270->slave_mode)
|
|
reg |= CS4270_MODE_SLAVE;
|
|
else
|
|
reg |= cs4270_mode_ratios[i].speed_mode;
|
|
|
|
ret = snd_soc_component_write(component, CS4270_MODE, reg);
|
|
if (ret < 0) {
|
|
dev_err(component->dev, "i2c write failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Set the DAI format */
|
|
|
|
reg = snd_soc_component_read(component, CS4270_FORMAT);
|
|
reg &= ~(CS4270_FORMAT_DAC_MASK | CS4270_FORMAT_ADC_MASK);
|
|
|
|
switch (cs4270->mode) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
reg |= CS4270_FORMAT_DAC_I2S | CS4270_FORMAT_ADC_I2S;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
reg |= CS4270_FORMAT_DAC_LJ | CS4270_FORMAT_ADC_LJ;
|
|
break;
|
|
default:
|
|
dev_err(component->dev, "unknown dai format\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = snd_soc_component_write(component, CS4270_FORMAT, reg);
|
|
if (ret < 0) {
|
|
dev_err(component->dev, "i2c write failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cs4270_dai_mute - enable/disable the CS4270 external mute
|
|
* @dai: the SOC DAI
|
|
* @mute: 0 = disable mute, 1 = enable mute
|
|
* @direction: (ignored)
|
|
*
|
|
* This function toggles the mute bits in the MUTE register. The CS4270's
|
|
* mute capability is intended for external muting circuitry, so if the
|
|
* board does not have the MUTEA or MUTEB pins connected to such circuitry,
|
|
* then this function will do nothing.
|
|
*/
|
|
static int cs4270_dai_mute(struct snd_soc_dai *dai, int mute, int direction)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct cs4270_private *cs4270 = snd_soc_component_get_drvdata(component);
|
|
int reg6;
|
|
|
|
reg6 = snd_soc_component_read(component, CS4270_MUTE);
|
|
|
|
if (mute)
|
|
reg6 |= CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B;
|
|
else {
|
|
reg6 &= ~(CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B);
|
|
reg6 |= cs4270->manual_mute;
|
|
}
|
|
|
|
return snd_soc_component_write(component, CS4270_MUTE, reg6);
|
|
}
|
|
|
|
/**
|
|
* cs4270_soc_put_mute - put callback for the 'Master Playback switch'
|
|
* alsa control.
|
|
* @kcontrol: mixer control
|
|
* @ucontrol: control element information
|
|
*
|
|
* This function basically passes the arguments on to the generic
|
|
* snd_soc_put_volsw() function and saves the mute information in
|
|
* our private data structure. This is because we want to prevent
|
|
* cs4270_dai_mute() neglecting the user's decision to manually
|
|
* mute the codec's output.
|
|
*
|
|
* Returns 0 for success.
|
|
*/
|
|
static int cs4270_soc_put_mute(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct cs4270_private *cs4270 = snd_soc_component_get_drvdata(component);
|
|
int left = !ucontrol->value.integer.value[0];
|
|
int right = !ucontrol->value.integer.value[1];
|
|
|
|
cs4270->manual_mute = (left ? CS4270_MUTE_DAC_A : 0) |
|
|
(right ? CS4270_MUTE_DAC_B : 0);
|
|
|
|
return snd_soc_put_volsw(kcontrol, ucontrol);
|
|
}
|
|
|
|
/* A list of non-DAPM controls that the CS4270 supports */
|
|
static const struct snd_kcontrol_new cs4270_snd_controls[] = {
|
|
SOC_DOUBLE_R("Master Playback Volume",
|
|
CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1),
|
|
SOC_SINGLE("Digital Sidetone Switch", CS4270_FORMAT, 5, 1, 0),
|
|
SOC_SINGLE("Soft Ramp Switch", CS4270_TRANS, 6, 1, 0),
|
|
SOC_SINGLE("Zero Cross Switch", CS4270_TRANS, 5, 1, 0),
|
|
SOC_SINGLE("De-emphasis filter", CS4270_TRANS, 0, 1, 0),
|
|
SOC_SINGLE("Popguard Switch", CS4270_MODE, 0, 1, 1),
|
|
SOC_SINGLE("Auto-Mute Switch", CS4270_MUTE, 5, 1, 0),
|
|
SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 1),
|
|
SOC_DOUBLE_EXT("Master Playback Switch", CS4270_MUTE, 0, 1, 1, 1,
|
|
snd_soc_get_volsw, cs4270_soc_put_mute),
|
|
};
|
|
|
|
static const struct snd_soc_dai_ops cs4270_dai_ops = {
|
|
.hw_params = cs4270_hw_params,
|
|
.set_sysclk = cs4270_set_dai_sysclk,
|
|
.set_fmt = cs4270_set_dai_fmt,
|
|
.mute_stream = cs4270_dai_mute,
|
|
.no_capture_mute = 1,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver cs4270_dai = {
|
|
.name = "cs4270-hifi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_CONTINUOUS,
|
|
.rate_min = 4000,
|
|
.rate_max = 216000,
|
|
.formats = CS4270_FORMATS,
|
|
},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_CONTINUOUS,
|
|
.rate_min = 4000,
|
|
.rate_max = 216000,
|
|
.formats = CS4270_FORMATS,
|
|
},
|
|
.ops = &cs4270_dai_ops,
|
|
};
|
|
|
|
/**
|
|
* cs4270_probe - ASoC probe function
|
|
* @component: ASoC component
|
|
*
|
|
* This function is called when ASoC has all the pieces it needs to
|
|
* instantiate a sound driver.
|
|
*/
|
|
static int cs4270_probe(struct snd_soc_component *component)
|
|
{
|
|
struct cs4270_private *cs4270 = snd_soc_component_get_drvdata(component);
|
|
int ret;
|
|
|
|
/* Disable auto-mute. This feature appears to be buggy. In some
|
|
* situations, auto-mute will not deactivate when it should, so we want
|
|
* this feature disabled by default. An application (e.g. alsactl) can
|
|
* re-enabled it by using the controls.
|
|
*/
|
|
ret = snd_soc_component_update_bits(component, CS4270_MUTE, CS4270_MUTE_AUTO, 0);
|
|
if (ret < 0) {
|
|
dev_err(component->dev, "i2c write failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Disable automatic volume control. The hardware enables, and it
|
|
* causes volume change commands to be delayed, sometimes until after
|
|
* playback has started. An application (e.g. alsactl) can
|
|
* re-enabled it by using the controls.
|
|
*/
|
|
ret = snd_soc_component_update_bits(component, CS4270_TRANS,
|
|
CS4270_TRANS_SOFT | CS4270_TRANS_ZERO, 0);
|
|
if (ret < 0) {
|
|
dev_err(component->dev, "i2c write failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
|
|
cs4270->supplies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cs4270_remove - ASoC remove function
|
|
* @component: ASoC component
|
|
*
|
|
* This function is the counterpart to cs4270_probe().
|
|
*/
|
|
static void cs4270_remove(struct snd_soc_component *component)
|
|
{
|
|
struct cs4270_private *cs4270 = snd_soc_component_get_drvdata(component);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/* This suspend/resume implementation can handle both - a simple standby
|
|
* where the codec remains powered, and a full suspend, where the voltage
|
|
* domain the codec is connected to is teared down and/or any other hardware
|
|
* reset condition is asserted.
|
|
*
|
|
* The codec's own power saving features are enabled in the suspend callback,
|
|
* and all registers are written back to the hardware when resuming.
|
|
*/
|
|
|
|
static int cs4270_soc_suspend(struct snd_soc_component *component)
|
|
{
|
|
struct cs4270_private *cs4270 = snd_soc_component_get_drvdata(component);
|
|
int reg, ret;
|
|
|
|
reg = snd_soc_component_read(component, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
ret = snd_soc_component_write(component, CS4270_PWRCTL, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies),
|
|
cs4270->supplies);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs4270_soc_resume(struct snd_soc_component *component)
|
|
{
|
|
struct cs4270_private *cs4270 = snd_soc_component_get_drvdata(component);
|
|
int reg, ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
|
|
cs4270->supplies);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
/* In case the device was put to hard reset during sleep, we need to
|
|
* wait 500ns here before any I2C communication. */
|
|
ndelay(500);
|
|
|
|
/* first restore the entire register cache ... */
|
|
regcache_sync(cs4270->regmap);
|
|
|
|
/* ... then disable the power-down bits */
|
|
reg = snd_soc_component_read(component, CS4270_PWRCTL);
|
|
reg &= ~CS4270_PWRCTL_PDN_ALL;
|
|
|
|
return snd_soc_component_write(component, CS4270_PWRCTL, reg);
|
|
}
|
|
#else
|
|
#define cs4270_soc_suspend NULL
|
|
#define cs4270_soc_resume NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*
|
|
* ASoC codec driver structure
|
|
*/
|
|
static const struct snd_soc_component_driver soc_component_device_cs4270 = {
|
|
.probe = cs4270_probe,
|
|
.remove = cs4270_remove,
|
|
.suspend = cs4270_soc_suspend,
|
|
.resume = cs4270_soc_resume,
|
|
.controls = cs4270_snd_controls,
|
|
.num_controls = ARRAY_SIZE(cs4270_snd_controls),
|
|
.dapm_widgets = cs4270_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(cs4270_dapm_widgets),
|
|
.dapm_routes = cs4270_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(cs4270_dapm_routes),
|
|
.idle_bias_on = 1,
|
|
.use_pmdown_time = 1,
|
|
.endianness = 1,
|
|
.non_legacy_dai_naming = 1,
|
|
};
|
|
|
|
/*
|
|
* cs4270_of_match - the device tree bindings
|
|
*/
|
|
static const struct of_device_id cs4270_of_match[] = {
|
|
{ .compatible = "cirrus,cs4270", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, cs4270_of_match);
|
|
|
|
static const struct regmap_config cs4270_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = CS4270_LASTREG,
|
|
.reg_defaults = cs4270_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(cs4270_reg_defaults),
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.write_flag_mask = CS4270_I2C_INCR,
|
|
|
|
.readable_reg = cs4270_reg_is_readable,
|
|
.volatile_reg = cs4270_reg_is_volatile,
|
|
};
|
|
|
|
/**
|
|
* cs4270_i2c_remove - deinitialize the I2C interface of the CS4270
|
|
* @i2c_client: the I2C client object
|
|
*
|
|
* This function puts the chip into low power mode when the i2c device
|
|
* is removed.
|
|
*/
|
|
static int cs4270_i2c_remove(struct i2c_client *i2c_client)
|
|
{
|
|
struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client);
|
|
|
|
gpiod_set_value_cansleep(cs4270->reset_gpio, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cs4270_i2c_probe - initialize the I2C interface of the CS4270
|
|
* @i2c_client: the I2C client object
|
|
* @id: the I2C device ID (ignored)
|
|
*
|
|
* This function is called whenever the I2C subsystem finds a device that
|
|
* matches the device ID given via a prior call to i2c_add_driver().
|
|
*/
|
|
static int cs4270_i2c_probe(struct i2c_client *i2c_client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct cs4270_private *cs4270;
|
|
unsigned int val;
|
|
int ret, i;
|
|
|
|
cs4270 = devm_kzalloc(&i2c_client->dev, sizeof(struct cs4270_private),
|
|
GFP_KERNEL);
|
|
if (!cs4270)
|
|
return -ENOMEM;
|
|
|
|
/* get the power supply regulators */
|
|
for (i = 0; i < ARRAY_SIZE(supply_names); i++)
|
|
cs4270->supplies[i].supply = supply_names[i];
|
|
|
|
ret = devm_regulator_bulk_get(&i2c_client->dev,
|
|
ARRAY_SIZE(cs4270->supplies),
|
|
cs4270->supplies);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* reset the device */
|
|
cs4270->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(cs4270->reset_gpio)) {
|
|
dev_dbg(&i2c_client->dev, "Error getting CS4270 reset GPIO\n");
|
|
return PTR_ERR(cs4270->reset_gpio);
|
|
}
|
|
|
|
if (cs4270->reset_gpio) {
|
|
dev_dbg(&i2c_client->dev, "Found reset GPIO\n");
|
|
gpiod_set_value_cansleep(cs4270->reset_gpio, 1);
|
|
}
|
|
|
|
/* Sleep 500ns before i2c communications */
|
|
ndelay(500);
|
|
|
|
cs4270->regmap = devm_regmap_init_i2c(i2c_client, &cs4270_regmap);
|
|
if (IS_ERR(cs4270->regmap))
|
|
return PTR_ERR(cs4270->regmap);
|
|
|
|
/* Verify that we have a CS4270 */
|
|
ret = regmap_read(cs4270->regmap, CS4270_CHIPID, &val);
|
|
if (ret < 0) {
|
|
dev_err(&i2c_client->dev, "failed to read i2c at addr %X\n",
|
|
i2c_client->addr);
|
|
return ret;
|
|
}
|
|
/* The top four bits of the chip ID should be 1100. */
|
|
if ((val & 0xF0) != 0xC0) {
|
|
dev_err(&i2c_client->dev, "device at addr %X is not a CS4270\n",
|
|
i2c_client->addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_info(&i2c_client->dev, "found device at i2c address %X\n",
|
|
i2c_client->addr);
|
|
dev_info(&i2c_client->dev, "hardware revision %X\n", val & 0xF);
|
|
|
|
i2c_set_clientdata(i2c_client, cs4270);
|
|
|
|
ret = devm_snd_soc_register_component(&i2c_client->dev,
|
|
&soc_component_device_cs4270, &cs4270_dai, 1);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* cs4270_id - I2C device IDs supported by this driver
|
|
*/
|
|
static const struct i2c_device_id cs4270_id[] = {
|
|
{"cs4270", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, cs4270_id);
|
|
|
|
/*
|
|
* cs4270_i2c_driver - I2C device identification
|
|
*
|
|
* This structure tells the I2C subsystem how to identify and support a
|
|
* given I2C device type.
|
|
*/
|
|
static struct i2c_driver cs4270_i2c_driver = {
|
|
.driver = {
|
|
.name = "cs4270",
|
|
.of_match_table = cs4270_of_match,
|
|
},
|
|
.id_table = cs4270_id,
|
|
.probe = cs4270_i2c_probe,
|
|
.remove = cs4270_i2c_remove,
|
|
};
|
|
|
|
module_i2c_driver(cs4270_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
|
|
MODULE_DESCRIPTION("Cirrus Logic CS4270 ALSA SoC Codec Driver");
|
|
MODULE_LICENSE("GPL");
|