mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
d6e6d5627f
Add documentation with details of new type of Mellanox watchdog driver. Signed-off-by: Michael Shych <michaelsh@mellanox.com> Reviewed-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200504141427.17685-5-michaelsh@mellanox.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
67 lines
2.5 KiB
ReStructuredText
67 lines
2.5 KiB
ReStructuredText
=========================
|
|
Mellanox watchdog drivers
|
|
=========================
|
|
|
|
for x86 based system switches
|
|
=============================
|
|
|
|
This driver provides watchdog functionality for various Mellanox
|
|
Ethernet and Infiniband switch systems.
|
|
|
|
Mellanox watchdog device is implemented in a programmable logic device.
|
|
|
|
There are 2 types of HW watchdog implementations.
|
|
|
|
Type 1:
|
|
Actual HW timeout can be defined as a power of 2 msec.
|
|
e.g. timeout 20 sec will be rounded up to 32768 msec.
|
|
The maximum timeout period is 32 sec (32768 msec.),
|
|
Get time-left isn't supported
|
|
|
|
Type 2:
|
|
Actual HW timeout is defined in sec. and it's the same as
|
|
a user-defined timeout.
|
|
Maximum timeout is 255 sec.
|
|
Get time-left is supported.
|
|
|
|
Type 3:
|
|
Same as Type 2 with extended maximum timeout period.
|
|
Maximum timeout is 65535 sec.
|
|
|
|
Type 1 HW watchdog implementation exist in old systems and
|
|
all new systems have type 2 HW watchdog.
|
|
Two types of HW implementation have also different register map.
|
|
|
|
Type 3 HW watchdog implementation can exist on all Mellanox systems
|
|
with new programmer logic device.
|
|
It's differentiated by WD capability bit.
|
|
Old systems still have only one main watchdog.
|
|
|
|
Mellanox system can have 2 watchdogs: main and auxiliary.
|
|
Main and auxiliary watchdog devices can be enabled together
|
|
on the same system.
|
|
There are several actions that can be defined in the watchdog:
|
|
system reset, start fans on full speed and increase register counter.
|
|
The last 2 actions are performed without a system reset.
|
|
Actions without reset are provided for auxiliary watchdog device,
|
|
which is optional.
|
|
Watchdog can be started during a probe, in this case it will be
|
|
pinged by watchdog core before watchdog device will be opened by
|
|
user space application.
|
|
Watchdog can be initialised in nowayout way, i.e. oncse started
|
|
it can't be stopped.
|
|
|
|
This mlx-wdt driver supports both HW watchdog implementations.
|
|
|
|
Watchdog driver is probed from the common mlx_platform driver.
|
|
Mlx_platform driver provides an appropriate set of registers for
|
|
Mellanox watchdog device, identity name (mlx-wdt-main or mlx-wdt-aux),
|
|
initial timeout, performed action in expiration and configuration flags.
|
|
watchdog configuration flags: nowayout and start_at_boot, hw watchdog
|
|
version - type1 or type2.
|
|
The driver checks during initialization if the previous system reset
|
|
was done by the watchdog. If yes, it makes a notification about this event.
|
|
|
|
Access to HW registers is performed through a generic regmap interface.
|
|
Programmable logic device registers have little-endian order.
|