korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-18 17:54:13 +08:00
Code Issues Packages Projects Releases Wiki Activity
06533e28c9
linux/arch/arm/mach-omap2/pm.c
Tony Lindgren 22a16f39e3 ARM: OMAP: Add initial 24xx suspend support 
This patch adds support for omap24xx power domains and
allows suspend to work.

Please note that for some reason core power domain still
does not seem to idle.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26 16:16:18 -07:00

409 lines
9.1 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap2/pm.c
*
* OMAP2 Power Management Routines
*
* Copyright (C) 2006 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2005 Texas Instruments, Inc.
* Richard Woodruff <r-woodruff2@ti.com>
*
* Based on pm.c for omap1
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/pm.h>
#include <linux/interrupt.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/irqs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include <asm/arch/pm.h>
#include "prcm-regs.h"
static struct clk *vclk;
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
static void (*saved_idle)(void);
extern void __init pmdomain_init(void);
extern void pmdomain_set_autoidle(void);
static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
void omap2_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
if (need_resched()) {
local_fiq_enable();
local_irq_enable();
return;
}
/*
* Since an interrupt may set up a timer, we don't want to
* reprogram the hardware timer with interrupts enabled.
* Re-enable interrupts only after returning from idle.
*/
timer_dyn_reprogram();
omap2_sram_idle();
local_fiq_enable();
local_irq_enable();
}
static int omap2_pm_prepare(suspend_state_t state)
{
int error = 0;
/* We cannot sleep in idle until we have resumed */
saved_idle = pm_idle;
pm_idle = NULL;
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
break;
case PM_SUSPEND_DISK:
return -ENOTSUPP;
default:
return -EINVAL;
}
return error;
}
#define INT0_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) | \
OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) | \
OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
#define INT1_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
#define INT2_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) | \
OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) | \
OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
#define preg(reg) printk("%s\t(0x%p):\t0x%08x\n", #reg, &reg, reg);
static void omap2_pm_debug(char * desc)
{
printk("%s:\n", desc);
preg(CM_CLKSTCTRL_MPU);
preg(CM_CLKSTCTRL_CORE);
preg(CM_CLKSTCTRL_GFX);
preg(CM_CLKSTCTRL_DSP);
preg(CM_CLKSTCTRL_MDM);
preg(PM_PWSTCTRL_MPU);
preg(PM_PWSTCTRL_CORE);
preg(PM_PWSTCTRL_GFX);
preg(PM_PWSTCTRL_DSP);
preg(PM_PWSTCTRL_MDM);
preg(PM_PWSTST_MPU);
preg(PM_PWSTST_CORE);
preg(PM_PWSTST_GFX);
preg(PM_PWSTST_DSP);
preg(PM_PWSTST_MDM);
preg(CM_AUTOIDLE1_CORE);
preg(CM_AUTOIDLE2_CORE);
preg(CM_AUTOIDLE3_CORE);
preg(CM_AUTOIDLE4_CORE);
preg(CM_AUTOIDLE_WKUP);
preg(CM_AUTOIDLE_PLL);
preg(CM_AUTOIDLE_DSP);
preg(CM_AUTOIDLE_MDM);
preg(CM_ICLKEN1_CORE);
preg(CM_ICLKEN2_CORE);
preg(CM_ICLKEN3_CORE);
preg(CM_ICLKEN4_CORE);
preg(CM_ICLKEN_GFX);
preg(CM_ICLKEN_WKUP);
preg(CM_ICLKEN_DSP);
preg(CM_ICLKEN_MDM);
preg(CM_IDLEST1_CORE);
preg(CM_IDLEST2_CORE);
preg(CM_IDLEST3_CORE);
preg(CM_IDLEST4_CORE);
preg(CM_IDLEST_GFX);
preg(CM_IDLEST_WKUP);
preg(CM_IDLEST_CKGEN);
preg(CM_IDLEST_DSP);
preg(CM_IDLEST_MDM);
preg(RM_RSTST_MPU);
preg(RM_RSTST_GFX);
preg(RM_RSTST_WKUP);
preg(RM_RSTST_DSP);
preg(RM_RSTST_MDM);
preg(PM_WKDEP_MPU);
preg(PM_WKDEP_CORE);
preg(PM_WKDEP_GFX);
preg(PM_WKDEP_DSP);
preg(PM_WKDEP_MDM);
preg(CM_FCLKEN_WKUP);
preg(CM_ICLKEN_WKUP);
preg(CM_IDLEST_WKUP);
preg(CM_AUTOIDLE_WKUP);
preg(CM_CLKSEL_WKUP);
preg(PM_WKEN_WKUP);
preg(PM_WKST_WKUP);
}
static inline void omap2_pm_save_registers(void)
{
/* Save interrupt registers */
OMAP24XX_SAVE(INTC_MIR0);
OMAP24XX_SAVE(INTC_MIR1);
OMAP24XX_SAVE(INTC_MIR2);
/* Save power control registers */
OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
/* Save power state registers */
OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
/* Save autoidle registers */
OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
/* Save idle state registers */
OMAP24XX_SAVE(CM_IDLEST1_CORE);
OMAP24XX_SAVE(CM_IDLEST2_CORE);
OMAP24XX_SAVE(CM_IDLEST3_CORE);
OMAP24XX_SAVE(CM_IDLEST4_CORE);
OMAP24XX_SAVE(CM_IDLEST_GFX);
OMAP24XX_SAVE(CM_IDLEST_WKUP);
OMAP24XX_SAVE(CM_IDLEST_CKGEN);
OMAP24XX_SAVE(CM_IDLEST_DSP);
OMAP24XX_SAVE(CM_IDLEST_MDM);
/* Save clock registers */
OMAP24XX_SAVE(CM_FCLKEN1_CORE);
OMAP24XX_SAVE(CM_FCLKEN2_CORE);
OMAP24XX_SAVE(CM_ICLKEN1_CORE);
OMAP24XX_SAVE(CM_ICLKEN2_CORE);
OMAP24XX_SAVE(CM_ICLKEN3_CORE);
OMAP24XX_SAVE(CM_ICLKEN4_CORE);
}
static inline void omap2_pm_restore_registers(void)
{
/* Restore clock state registers */
OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
/* Restore power state registers */
OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
/* Restore idle state registers */
OMAP24XX_RESTORE(CM_IDLEST1_CORE);
OMAP24XX_RESTORE(CM_IDLEST2_CORE);
OMAP24XX_RESTORE(CM_IDLEST3_CORE);
OMAP24XX_RESTORE(CM_IDLEST4_CORE);
OMAP24XX_RESTORE(CM_IDLEST_GFX);
OMAP24XX_RESTORE(CM_IDLEST_WKUP);
OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
OMAP24XX_RESTORE(CM_IDLEST_DSP);
OMAP24XX_RESTORE(CM_IDLEST_MDM);
/* Restore autoidle registers */
OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
/* Restore clock registers */
OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
/* REVISIT: Clear interrupts here */
/* Restore interrupt registers */
OMAP24XX_RESTORE(INTC_MIR0);
OMAP24XX_RESTORE(INTC_MIR1);
OMAP24XX_RESTORE(INTC_MIR2);
}
static int omap2_pm_suspend(void)
{
int processor_type = 0;
/* REVISIT: 0x21 or 0x26? */
if (cpu_is_omap2420())
processor_type = 0x21;
if (!processor_type)
return -ENOTSUPP;
local_irq_disable();
local_fiq_disable();
omap2_pm_save_registers();
/* Disable interrupts except for the wake events */
INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
pmdomain_set_autoidle();
/* Clear old wake-up events */
PM_WKST1_CORE = 0;
PM_WKST2_CORE = 0;
PM_WKST_WKUP = 0;
/* Enable wake-up events */
PM_WKEN1_CORE = (1 << 22) | (1 << 21); /* UART1 & 2 */
PM_WKEN2_CORE = (1 << 2); /* UART3 */
PM_WKEN_WKUP = (1 << 2) | (1 << 0); /* GPIO & GPT1 */
/* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
* in the SRAM suspend code */
CM_FCLKEN1_CORE = 0;
CM_FCLKEN2_CORE = 0;
CM_ICLKEN1_CORE = 0;
CM_ICLKEN3_CORE = 0;
CM_ICLKEN4_CORE = 0;
omap2_pm_debug("Status before suspend");
/* Must wait for serial buffers to clear */
mdelay(200);
/* Jump to SRAM suspend code
* REVISIT: When is this SDRC_DLLB_CTRL?
*/
omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
/* Back from sleep */
omap2_pm_restore_registers();
local_fiq_enable();
local_irq_enable();
return 0;
}
static int omap2_pm_enter(suspend_state_t state)
{
int ret = 0;
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap2_pm_suspend();
break;
case PM_SUSPEND_DISK:
ret = -ENOTSUPP;
break;
default:
ret = -EINVAL;
}
return ret;
}
static int omap2_pm_finish(suspend_state_t state)
{
pm_idle = saved_idle;
return 0;
}
static struct pm_ops omap_pm_ops = {
.pm_disk_mode = 0,
.prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
.finish = omap2_pm_finish,
};
int __init omap2_pm_init(void)
{
printk("Power Management for TI OMAP.\n");
vclk = clk_get(NULL, "virt_prcm_set");
if (IS_ERR(vclk)) {
printk(KERN_ERR "Could not get PM vclk\n");
return -ENODEV;
}
/*
* We copy the assembler sleep/wakeup routines to SRAM.
* These routines need to be in SRAM as that's the only
* memory the MPU can see when it wakes up.
*/
omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
omap24xx_idle_loop_suspend_sz);
omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
omap24xx_cpu_suspend_sz);
pm_set_ops(&omap_pm_ops);
pm_idle = omap2_pm_idle;
pmdomain_init();
return 0;
}
__initcall(omap2_pm_init);
Reference in New Issue View Git Blame Copy Permalink