mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 10:44:23 +08:00
064b53dbcc
Some PCI devices (e.g. 3c905B, 3c556B) lose all configuration (including BARs) when transitioning from D3hot->D0. This leaves such a device in an inaccessible state. The patch below causes the BARs to be restored when enabling such a device, so that its driver will be able to access it. The patch also adds pci_restore_bars as a new global symbol, and adds a correpsonding EXPORT_SYMBOL_GPL for that. Some firmware (e.g. Thinkpad T21) leaves devices in D3hot after a (re)boot. Most drivers call pci_enable_device very early, so devices left in D3hot that lose configuration during the D3hot->D0 transition will be inaccessible to their drivers. Drivers could be modified to account for this, but it would be difficult to know which drivers need modification. This is especially true since often many devices are covered by the same driver. It likely would be necessary to replicate code across dozens of drivers. The patch below should trigger only when transitioning from D3hot->D0 (or at boot), and only for devices that have the "no soft reset" bit cleared in the PM control register. I believe it is safe to include this patch as part of the PCI infrastructure. The cleanest implementation of pci_restore_bars was to call pci_update_resource. Unfortunately, that does not currently exist for the sparc64 architecture. The patch below includes a null implemenation of pci_update_resource for sparc64. Some have expressed interest in making general use of the the pci_restore_bars function, so that has been exported to GPL licensed modules. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|---|---|---|
| .. | ||
| auxio.c | ||
| binfmt_aout32.c | ||
| binfmt_elf32.c | ||
| central.c | ||
| chmc.c | ||
| cpu.c | ||
| devices.c | ||
| dtlb_backend.S | ||
| dtlb_base.S | ||
| dtlb_prot.S | ||
| ebus.c | ||
| entry.S | ||
| etrap.S | ||
| head.S | ||
| idprom.c | ||
| init_task.c | ||
| ioctl32.c | ||
| iommu_common.c | ||
| iommu_common.h | ||
| irq.c | ||
| isa.c | ||
| itlb_base.S | ||
| kprobes.c | ||
| Makefile | ||
| module.c | ||
| pci_common.c | ||
| pci_impl.h | ||
| pci_iommu.c | ||
| pci_psycho.c | ||
| pci_sabre.c | ||
| pci_schizo.c | ||
| pci.c | ||
| power.c | ||
| process.c | ||
| ptrace.c | ||
| rtrap.S | ||
| sbus.c | ||
| semaphore.c | ||
| setup.c | ||
| signal32.c | ||
| signal.c | ||
| smp.c | ||
| sparc64_ksyms.c | ||
| starfire.c | ||
| sunos_ioctl32.c | ||
| sys32.S | ||
| sys_sparc32.c | ||
| sys_sparc.c | ||
| sys_sunos32.c | ||
| systbls.S | ||
| time.c | ||
| trampoline.S | ||
| traps.c | ||
| ttable.S | ||
| una_asm.S | ||
| unaligned.c | ||
| us2e_cpufreq.c | ||
| us3_cpufreq.c | ||
| vmlinux.lds.S | ||
| winfixup.S | ||