linux/arch/mips/mti-malta/malta-platform.c
Paul Gortmaker 26dd3e4ff9 MIPS: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  In the case of
some code where it is modular, we can extend that to also include
files that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h

The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.

Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace/add as needed.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Build coverage of all the mips defconfigs revealed the module.h
header was masking a couple of implicit include instances, so
we add the appropriate headers there.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Daney <david.daney@cavium.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Steven J. Hill" <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15131/
[james.hogan@imgtec.com: Preserve sort order where it already exists]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-14 09:00:25 +00:00

76 lines
2.0 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006, 07 MIPS Technologies, Inc.
* written by Ralf Baechle (ralf@linux-mips.org)
* written by Ralf Baechle <ralf@linux-mips.org>
*
* Copyright (C) 2008 Wind River Systems, Inc.
* updated by Tiejun Chen <tiejun.chen@windriver.com>
*
* 1. Probe driver for the Malta's UART ports:
*
* o 2 ports in the SMC SuperIO
* o 1 port in the CBUS UART, a discrete 16550 which normally is only used
* for bringups.
*
* We don't use 8250_platform.c on Malta as it would result in the CBUS
* UART becoming ttyS0.
*
* 2. Register RTC-CMOS platform device on Malta.
*/
#include <linux/init.h>
#include <linux/serial_8250.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <asm/mips-boards/maltaint.h>
#define SMC_PORT(base, int) \
{ \
.iobase = base, \
.irq = int, \
.uartclk = 1843200, \
.iotype = UPIO_PORT, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
.regshift = 0, \
}
#define CBUS_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
static struct plat_serial8250_port uart8250_data[] = {
SMC_PORT(0x3F8, 4),
SMC_PORT(0x2F8, 3),
#ifndef CONFIG_MIPS_CMP
{
.mapbase = 0x1f000900, /* The CBUS UART */
.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
.uartclk = 3686400, /* Twice the usual clk! */
.iotype = UPIO_MEM32,
.flags = CBUS_UART_FLAGS,
.regshift = 3,
},
#endif
{ },
};
static struct platform_device malta_uart8250_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = uart8250_data,
},
};
static struct platform_device *malta_devices[] __initdata = {
&malta_uart8250_device,
};
static int __init malta_add_devices(void)
{
return platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
}
device_initcall(malta_add_devices);