mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 02:54:32 +08:00
4c23db0f9f
The ACCES 104-DIO-48E series communicates via the ISA bus. As such, it is more appropriate to use the ISA bus driver over the platform driver to control the ACCES 104-DIO-48E GPIO driver. This patch also adds support for multiple devices via the base and irq module array parameters. Each element of the base array corresponds to a discrete device; each element of the irq array corresponds to the respective device addressed in the respective base array element. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
401 lines
11 KiB
C
401 lines
11 KiB
C
/*
|
|
* GPIO driver for the ACCES 104-DIO-48E series
|
|
* Copyright (C) 2016 William Breathitt Gray
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License, version 2, as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* This driver supports the following ACCES devices: 104-DIO-48E and
|
|
* 104-DIO-24E.
|
|
*/
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqdesc.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define DIO48E_EXTENT 16
|
|
#define MAX_NUM_DIO48E max_num_isa_dev(DIO48E_EXTENT)
|
|
|
|
static unsigned int base[MAX_NUM_DIO48E];
|
|
static unsigned int num_dio48e;
|
|
module_param_array(base, uint, &num_dio48e, 0);
|
|
MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses");
|
|
|
|
static unsigned int irq[MAX_NUM_DIO48E];
|
|
module_param_array(irq, uint, NULL, 0);
|
|
MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers");
|
|
|
|
/**
|
|
* struct dio48e_gpio - GPIO device private data structure
|
|
* @chip: instance of the gpio_chip
|
|
* @io_state: bit I/O state (whether bit is set to input or output)
|
|
* @out_state: output bits state
|
|
* @control: Control registers state
|
|
* @lock: synchronization lock to prevent I/O race conditions
|
|
* @base: base port address of the GPIO device
|
|
* @irq: Interrupt line number
|
|
* @irq_mask: I/O bits affected by interrupts
|
|
*/
|
|
struct dio48e_gpio {
|
|
struct gpio_chip chip;
|
|
unsigned char io_state[6];
|
|
unsigned char out_state[6];
|
|
unsigned char control[2];
|
|
spinlock_t lock;
|
|
unsigned base;
|
|
unsigned irq;
|
|
unsigned char irq_mask;
|
|
};
|
|
|
|
static int dio48e_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned port = offset / 8;
|
|
const unsigned mask = BIT(offset % 8);
|
|
|
|
return !!(dio48egpio->io_state[port] & mask);
|
|
}
|
|
|
|
static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned io_port = offset / 8;
|
|
const unsigned control_port = io_port / 2;
|
|
const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
|
|
unsigned long flags;
|
|
unsigned control;
|
|
|
|
spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
/* Check if configuring Port C */
|
|
if (io_port == 2 || io_port == 5) {
|
|
/* Port C can be configured by nibble */
|
|
if (offset % 8 > 3) {
|
|
dio48egpio->io_state[io_port] |= 0xF0;
|
|
dio48egpio->control[control_port] |= BIT(3);
|
|
} else {
|
|
dio48egpio->io_state[io_port] |= 0x0F;
|
|
dio48egpio->control[control_port] |= BIT(0);
|
|
}
|
|
} else {
|
|
dio48egpio->io_state[io_port] |= 0xFF;
|
|
if (io_port == 0 || io_port == 3)
|
|
dio48egpio->control[control_port] |= BIT(4);
|
|
else
|
|
dio48egpio->control[control_port] |= BIT(1);
|
|
}
|
|
|
|
control = BIT(7) | dio48egpio->control[control_port];
|
|
outb(control, control_addr);
|
|
control &= ~BIT(7);
|
|
outb(control, control_addr);
|
|
|
|
spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
|
|
int value)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned io_port = offset / 8;
|
|
const unsigned control_port = io_port / 2;
|
|
const unsigned mask = BIT(offset % 8);
|
|
const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
|
|
const unsigned out_port = (io_port > 2) ? io_port + 1 : io_port;
|
|
unsigned long flags;
|
|
unsigned control;
|
|
|
|
spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
/* Check if configuring Port C */
|
|
if (io_port == 2 || io_port == 5) {
|
|
/* Port C can be configured by nibble */
|
|
if (offset % 8 > 3) {
|
|
dio48egpio->io_state[io_port] &= 0x0F;
|
|
dio48egpio->control[control_port] &= ~BIT(3);
|
|
} else {
|
|
dio48egpio->io_state[io_port] &= 0xF0;
|
|
dio48egpio->control[control_port] &= ~BIT(0);
|
|
}
|
|
} else {
|
|
dio48egpio->io_state[io_port] &= 0x00;
|
|
if (io_port == 0 || io_port == 3)
|
|
dio48egpio->control[control_port] &= ~BIT(4);
|
|
else
|
|
dio48egpio->control[control_port] &= ~BIT(1);
|
|
}
|
|
|
|
if (value)
|
|
dio48egpio->out_state[io_port] |= mask;
|
|
else
|
|
dio48egpio->out_state[io_port] &= ~mask;
|
|
|
|
control = BIT(7) | dio48egpio->control[control_port];
|
|
outb(control, control_addr);
|
|
|
|
outb(dio48egpio->out_state[io_port], dio48egpio->base + out_port);
|
|
|
|
control &= ~BIT(7);
|
|
outb(control, control_addr);
|
|
|
|
spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dio48e_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned port = offset / 8;
|
|
const unsigned mask = BIT(offset % 8);
|
|
const unsigned in_port = (port > 2) ? port + 1 : port;
|
|
unsigned long flags;
|
|
unsigned port_state;
|
|
|
|
spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
/* ensure that GPIO is set for input */
|
|
if (!(dio48egpio->io_state[port] & mask)) {
|
|
spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
port_state = inb(dio48egpio->base + in_port);
|
|
|
|
spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
|
|
return !!(port_state & mask);
|
|
}
|
|
|
|
static void dio48e_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned port = offset / 8;
|
|
const unsigned mask = BIT(offset % 8);
|
|
const unsigned out_port = (port > 2) ? port + 1 : port;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
if (value)
|
|
dio48egpio->out_state[port] |= mask;
|
|
else
|
|
dio48egpio->out_state[port] &= ~mask;
|
|
|
|
outb(dio48egpio->out_state[port], dio48egpio->base + out_port);
|
|
|
|
spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
}
|
|
|
|
static void dio48e_irq_ack(struct irq_data *data)
|
|
{
|
|
}
|
|
|
|
static void dio48e_irq_mask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned long offset = irqd_to_hwirq(data);
|
|
unsigned long flags;
|
|
|
|
/* only bit 3 on each respective Port C supports interrupts */
|
|
if (offset != 19 && offset != 43)
|
|
return;
|
|
|
|
spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
if (offset == 19)
|
|
dio48egpio->irq_mask &= ~BIT(0);
|
|
else
|
|
dio48egpio->irq_mask &= ~BIT(1);
|
|
|
|
if (!dio48egpio->irq_mask)
|
|
/* disable interrupts */
|
|
inb(dio48egpio->base + 0xB);
|
|
|
|
spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
}
|
|
|
|
static void dio48e_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
|
|
const unsigned long offset = irqd_to_hwirq(data);
|
|
unsigned long flags;
|
|
|
|
/* only bit 3 on each respective Port C supports interrupts */
|
|
if (offset != 19 && offset != 43)
|
|
return;
|
|
|
|
spin_lock_irqsave(&dio48egpio->lock, flags);
|
|
|
|
if (!dio48egpio->irq_mask) {
|
|
/* enable interrupts */
|
|
outb(0x00, dio48egpio->base + 0xF);
|
|
outb(0x00, dio48egpio->base + 0xB);
|
|
}
|
|
|
|
if (offset == 19)
|
|
dio48egpio->irq_mask |= BIT(0);
|
|
else
|
|
dio48egpio->irq_mask |= BIT(1);
|
|
|
|
spin_unlock_irqrestore(&dio48egpio->lock, flags);
|
|
}
|
|
|
|
static int dio48e_irq_set_type(struct irq_data *data, unsigned flow_type)
|
|
{
|
|
const unsigned long offset = irqd_to_hwirq(data);
|
|
|
|
/* only bit 3 on each respective Port C supports interrupts */
|
|
if (offset != 19 && offset != 43)
|
|
return -EINVAL;
|
|
|
|
if (flow_type != IRQ_TYPE_NONE && flow_type != IRQ_TYPE_EDGE_RISING)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip dio48e_irqchip = {
|
|
.name = "104-dio-48e",
|
|
.irq_ack = dio48e_irq_ack,
|
|
.irq_mask = dio48e_irq_mask,
|
|
.irq_unmask = dio48e_irq_unmask,
|
|
.irq_set_type = dio48e_irq_set_type
|
|
};
|
|
|
|
static irqreturn_t dio48e_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = dev_id;
|
|
struct gpio_chip *const chip = &dio48egpio->chip;
|
|
const unsigned long irq_mask = dio48egpio->irq_mask;
|
|
unsigned long gpio;
|
|
|
|
for_each_set_bit(gpio, &irq_mask, 2)
|
|
generic_handle_irq(irq_find_mapping(chip->irqdomain,
|
|
19 + gpio*24));
|
|
|
|
spin_lock(&dio48egpio->lock);
|
|
|
|
outb(0x00, dio48egpio->base + 0xF);
|
|
|
|
spin_unlock(&dio48egpio->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int dio48e_probe(struct device *dev, unsigned int id)
|
|
{
|
|
struct dio48e_gpio *dio48egpio;
|
|
const char *const name = dev_name(dev);
|
|
int err;
|
|
|
|
dio48egpio = devm_kzalloc(dev, sizeof(*dio48egpio), GFP_KERNEL);
|
|
if (!dio48egpio)
|
|
return -ENOMEM;
|
|
|
|
if (!devm_request_region(dev, base[id], DIO48E_EXTENT, name)) {
|
|
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
|
|
base[id], base[id] + DIO48E_EXTENT);
|
|
return -EBUSY;
|
|
}
|
|
|
|
dio48egpio->chip.label = name;
|
|
dio48egpio->chip.parent = dev;
|
|
dio48egpio->chip.owner = THIS_MODULE;
|
|
dio48egpio->chip.base = -1;
|
|
dio48egpio->chip.ngpio = 48;
|
|
dio48egpio->chip.get_direction = dio48e_gpio_get_direction;
|
|
dio48egpio->chip.direction_input = dio48e_gpio_direction_input;
|
|
dio48egpio->chip.direction_output = dio48e_gpio_direction_output;
|
|
dio48egpio->chip.get = dio48e_gpio_get;
|
|
dio48egpio->chip.set = dio48e_gpio_set;
|
|
dio48egpio->base = base[id];
|
|
dio48egpio->irq = irq[id];
|
|
|
|
spin_lock_init(&dio48egpio->lock);
|
|
|
|
dev_set_drvdata(dev, dio48egpio);
|
|
|
|
err = gpiochip_add_data(&dio48egpio->chip, dio48egpio);
|
|
if (err) {
|
|
dev_err(dev, "GPIO registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
/* initialize all GPIO as output */
|
|
outb(0x80, base[id] + 3);
|
|
outb(0x00, base[id]);
|
|
outb(0x00, base[id] + 1);
|
|
outb(0x00, base[id] + 2);
|
|
outb(0x00, base[id] + 3);
|
|
outb(0x80, base[id] + 7);
|
|
outb(0x00, base[id] + 4);
|
|
outb(0x00, base[id] + 5);
|
|
outb(0x00, base[id] + 6);
|
|
outb(0x00, base[id] + 7);
|
|
|
|
/* disable IRQ by default */
|
|
inb(base[id] + 0xB);
|
|
|
|
err = gpiochip_irqchip_add(&dio48egpio->chip, &dio48e_irqchip, 0,
|
|
handle_edge_irq, IRQ_TYPE_NONE);
|
|
if (err) {
|
|
dev_err(dev, "Could not add irqchip (%d)\n", err);
|
|
goto err_gpiochip_remove;
|
|
}
|
|
|
|
err = request_irq(irq[id], dio48e_irq_handler, 0, name, dio48egpio);
|
|
if (err) {
|
|
dev_err(dev, "IRQ handler registering failed (%d)\n", err);
|
|
goto err_gpiochip_remove;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_gpiochip_remove:
|
|
gpiochip_remove(&dio48egpio->chip);
|
|
return err;
|
|
}
|
|
|
|
static int dio48e_remove(struct device *dev, unsigned int id)
|
|
{
|
|
struct dio48e_gpio *const dio48egpio = dev_get_drvdata(dev);
|
|
|
|
free_irq(dio48egpio->irq, dio48egpio);
|
|
gpiochip_remove(&dio48egpio->chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct isa_driver dio48e_driver = {
|
|
.probe = dio48e_probe,
|
|
.driver = {
|
|
.name = "104-dio-48e"
|
|
},
|
|
.remove = dio48e_remove
|
|
};
|
|
module_isa_driver(dio48e_driver, num_dio48e);
|
|
|
|
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
|
|
MODULE_DESCRIPTION("ACCES 104-DIO-48E GPIO driver");
|
|
MODULE_LICENSE("GPL v2");
|