mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-17 07:54:54 +08:00
ed815bd3fe
_PAGE_USER is used to select the zone. Today zone 0 is kernel and zone 1 is user. To implement _PAGE_NONE, _PAGE_USER is cleared, leading to no access for user but kernel still has access to the page so it's possible for a user application to write in that page by using a kernel function as trampoline. What is really wanted is to have user rights on pages below TASK_SIZE and no user rights on pages above TASK_SIZE. Use zones for that. There are 16 zones so lets use the 4 upper address bits to set the zone and declare zone rights based on TASK_SIZE. Then drop _PAGE_USER and reuse it as _PAGE_READ that will be checked in Data TLB miss handler. That will properly handle PAGE_NONE for both kernel and user. In addition, it partially implements execute-only right. The implementation won't be complete because once a TLB has been loaded via the Instruction TLB miss handler, it will be possible to read the page. But at least it can't be read unless it is executed first. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/2a13e3ba8a5dec43143cc1f9a91ec71ea1529f3c.1695659959.git.christophe.leroy@csgroup.eu
722 lines
20 KiB
ArmAsm
722 lines
20 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
|
|
* Initial PowerPC version.
|
|
* Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
|
|
* Rewritten for PReP
|
|
* Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
|
|
* Low-level exception handers, MMU support, and rewrite.
|
|
* Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
|
|
* PowerPC 8xx modifications.
|
|
* Copyright (c) 1998-1999 TiVo, Inc.
|
|
* PowerPC 403GCX modifications.
|
|
* Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
|
|
* PowerPC 403GCX/405GP modifications.
|
|
* Copyright 2000 MontaVista Software Inc.
|
|
* PPC405 modifications
|
|
* PowerPC 403GCX/405GP modifications.
|
|
* Author: MontaVista Software, Inc.
|
|
* frank_rowand@mvista.com or source@mvista.com
|
|
* debbie_chu@mvista.com
|
|
*
|
|
* Module name: head_4xx.S
|
|
*
|
|
* Description:
|
|
* Kernel execution entry point code.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/pgtable.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/linkage.h>
|
|
|
|
#include <asm/processor.h>
|
|
#include <asm/page.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/ptrace.h>
|
|
|
|
#include "head_32.h"
|
|
|
|
/* As with the other PowerPC ports, it is expected that when code
|
|
* execution begins here, the following registers contain valid, yet
|
|
* optional, information:
|
|
*
|
|
* r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
|
|
* r4 - Starting address of the init RAM disk
|
|
* r5 - Ending address of the init RAM disk
|
|
* r6 - Start of kernel command line string (e.g. "mem=96m")
|
|
* r7 - End of kernel command line string
|
|
*
|
|
* This is all going to change RSN when we add bi_recs....... -- Dan
|
|
*/
|
|
__HEAD
|
|
_GLOBAL(_stext);
|
|
_GLOBAL(_start);
|
|
|
|
mr r31,r3 /* save device tree ptr */
|
|
|
|
/* We have to turn on the MMU right away so we get cache modes
|
|
* set correctly.
|
|
*/
|
|
bl initial_mmu
|
|
|
|
/* We now have the lower 16 Meg mapped into TLB entries, and the caches
|
|
* ready to work.
|
|
*/
|
|
turn_on_mmu:
|
|
lis r0,MSR_KERNEL@h
|
|
ori r0,r0,MSR_KERNEL@l
|
|
mtspr SPRN_SRR1,r0
|
|
lis r0,start_here@h
|
|
ori r0,r0,start_here@l
|
|
mtspr SPRN_SRR0,r0
|
|
rfi /* enables MMU */
|
|
b . /* prevent prefetch past rfi */
|
|
|
|
/*
|
|
* This area is used for temporarily saving registers during the
|
|
* critical exception prolog.
|
|
*/
|
|
. = 0xc0
|
|
crit_save:
|
|
_GLOBAL(crit_r10)
|
|
.space 4
|
|
_GLOBAL(crit_r11)
|
|
.space 4
|
|
_GLOBAL(crit_srr0)
|
|
.space 4
|
|
_GLOBAL(crit_srr1)
|
|
.space 4
|
|
_GLOBAL(crit_r1)
|
|
.space 4
|
|
_GLOBAL(crit_dear)
|
|
.space 4
|
|
_GLOBAL(crit_esr)
|
|
.space 4
|
|
|
|
/*
|
|
* Exception prolog for critical exceptions. This is a little different
|
|
* from the normal exception prolog above since a critical exception
|
|
* can potentially occur at any point during normal exception processing.
|
|
* Thus we cannot use the same SPRG registers as the normal prolog above.
|
|
* Instead we use a couple of words of memory at low physical addresses.
|
|
* This is OK since we don't support SMP on these processors.
|
|
*/
|
|
.macro CRITICAL_EXCEPTION_PROLOG trapno name
|
|
stw r10,crit_r10@l(0) /* save two registers to work with */
|
|
stw r11,crit_r11@l(0)
|
|
mfspr r10,SPRN_SRR0
|
|
mfspr r11,SPRN_SRR1
|
|
stw r10,crit_srr0@l(0)
|
|
stw r11,crit_srr1@l(0)
|
|
mfspr r10,SPRN_DEAR
|
|
mfspr r11,SPRN_ESR
|
|
stw r10,crit_dear@l(0)
|
|
stw r11,crit_esr@l(0)
|
|
mfcr r10 /* save CR in r10 for now */
|
|
mfspr r11,SPRN_SRR3 /* check whether user or kernel */
|
|
andi. r11,r11,MSR_PR
|
|
lis r11,(critirq_ctx-PAGE_OFFSET)@ha
|
|
lwz r11,(critirq_ctx-PAGE_OFFSET)@l(r11)
|
|
beq 1f
|
|
/* COMING FROM USER MODE */
|
|
mfspr r11,SPRN_SPRG_THREAD /* if from user, start at top of */
|
|
lwz r11,TASK_STACK-THREAD(r11) /* this thread's kernel stack */
|
|
1: stw r1,crit_r1@l(0)
|
|
addi r1,r11,THREAD_SIZE-INT_FRAME_SIZE /* Alloc an excpt frm */
|
|
LOAD_REG_IMMEDIATE(r11, MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)) /* re-enable MMU */
|
|
mtspr SPRN_SRR1, r11
|
|
lis r11, 1f@h
|
|
ori r11, r11, 1f@l
|
|
mtspr SPRN_SRR0, r11
|
|
rfi
|
|
|
|
.text
|
|
1:
|
|
\name\()_virt:
|
|
lwz r11,crit_r1@l(0)
|
|
stw r11,GPR1(r1)
|
|
stw r11,0(r1)
|
|
mr r11,r1
|
|
stw r10,_CCR(r11) /* save various registers */
|
|
stw r12,GPR12(r11)
|
|
stw r9,GPR9(r11)
|
|
mflr r10
|
|
stw r10,_LINK(r11)
|
|
lis r9,PAGE_OFFSET@ha
|
|
lwz r10,crit_r10@l(r9)
|
|
lwz r12,crit_r11@l(r9)
|
|
stw r10,GPR10(r11)
|
|
stw r12,GPR11(r11)
|
|
lwz r12,crit_dear@l(r9)
|
|
lwz r9,crit_esr@l(r9)
|
|
stw r12,_DEAR(r11) /* since they may have had stuff */
|
|
stw r9,_ESR(r11) /* exception was taken */
|
|
mfspr r12,SPRN_SRR2
|
|
mfspr r9,SPRN_SRR3
|
|
rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */
|
|
COMMON_EXCEPTION_PROLOG_END \trapno + 2
|
|
_ASM_NOKPROBE_SYMBOL(\name\()_virt)
|
|
.endm
|
|
|
|
/*
|
|
* State at this point:
|
|
* r9 saved in stack frame, now saved SRR3 & ~MSR_WE
|
|
* r10 saved in crit_r10 and in stack frame, trashed
|
|
* r11 saved in crit_r11 and in stack frame,
|
|
* now phys stack/exception frame pointer
|
|
* r12 saved in stack frame, now saved SRR2
|
|
* CR saved in stack frame, CR0.EQ = !SRR3.PR
|
|
* LR, DEAR, ESR in stack frame
|
|
* r1 saved in stack frame, now virt stack/excframe pointer
|
|
* r0, r3-r8 saved in stack frame
|
|
*/
|
|
|
|
/*
|
|
* Exception vectors.
|
|
*/
|
|
#define CRITICAL_EXCEPTION(n, label, hdlr) \
|
|
START_EXCEPTION(n, label); \
|
|
CRITICAL_EXCEPTION_PROLOG n label; \
|
|
prepare_transfer_to_handler; \
|
|
bl hdlr; \
|
|
b ret_from_crit_exc
|
|
|
|
/*
|
|
* 0x0100 - Critical Interrupt Exception
|
|
*/
|
|
CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
|
|
|
|
/*
|
|
* 0x0200 - Machine Check Exception
|
|
*/
|
|
CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
|
|
|
|
/*
|
|
* 0x0300 - Data Storage Exception
|
|
* This happens for just a few reasons. U0 set (but we don't do that),
|
|
* or zone protection fault (user violation, write to protected page).
|
|
* The other Data TLB exceptions bail out to this point
|
|
* if they can't resolve the lightweight TLB fault.
|
|
*/
|
|
START_EXCEPTION(0x0300, DataStorage)
|
|
EXCEPTION_PROLOG 0x300 DataStorage handle_dar_dsisr=1
|
|
prepare_transfer_to_handler
|
|
bl do_page_fault
|
|
b interrupt_return
|
|
|
|
/*
|
|
* 0x0400 - Instruction Storage Exception
|
|
* This is caused by a fetch from non-execute or guarded pages.
|
|
*/
|
|
START_EXCEPTION(0x0400, InstructionAccess)
|
|
EXCEPTION_PROLOG 0x400 InstructionAccess
|
|
li r5,0
|
|
stw r5, _ESR(r11) /* Zero ESR */
|
|
stw r12, _DEAR(r11) /* SRR0 as DEAR */
|
|
prepare_transfer_to_handler
|
|
bl do_page_fault
|
|
b interrupt_return
|
|
|
|
/* 0x0500 - External Interrupt Exception */
|
|
EXCEPTION(0x0500, HardwareInterrupt, do_IRQ)
|
|
|
|
/* 0x0600 - Alignment Exception */
|
|
START_EXCEPTION(0x0600, Alignment)
|
|
EXCEPTION_PROLOG 0x600 Alignment handle_dar_dsisr=1
|
|
prepare_transfer_to_handler
|
|
bl alignment_exception
|
|
REST_NVGPRS(r1)
|
|
b interrupt_return
|
|
|
|
/* 0x0700 - Program Exception */
|
|
START_EXCEPTION(0x0700, ProgramCheck)
|
|
EXCEPTION_PROLOG 0x700 ProgramCheck handle_dar_dsisr=1
|
|
prepare_transfer_to_handler
|
|
bl program_check_exception
|
|
REST_NVGPRS(r1)
|
|
b interrupt_return
|
|
|
|
EXCEPTION(0x0800, Trap_08, unknown_exception)
|
|
EXCEPTION(0x0900, Trap_09, unknown_exception)
|
|
EXCEPTION(0x0A00, Trap_0A, unknown_exception)
|
|
EXCEPTION(0x0B00, Trap_0B, unknown_exception)
|
|
|
|
/* 0x0C00 - System Call Exception */
|
|
START_EXCEPTION(0x0C00, SystemCall)
|
|
SYSCALL_ENTRY 0xc00
|
|
/* Trap_0D is commented out to get more space for system call exception */
|
|
|
|
/* EXCEPTION(0x0D00, Trap_0D, unknown_exception) */
|
|
EXCEPTION(0x0E00, Trap_0E, unknown_exception)
|
|
EXCEPTION(0x0F00, Trap_0F, unknown_exception)
|
|
|
|
/* 0x1000 - Programmable Interval Timer (PIT) Exception */
|
|
START_EXCEPTION(0x1000, DecrementerTrap)
|
|
b Decrementer
|
|
|
|
/* 0x1010 - Fixed Interval Timer (FIT) Exception */
|
|
START_EXCEPTION(0x1010, FITExceptionTrap)
|
|
b FITException
|
|
|
|
/* 0x1020 - Watchdog Timer (WDT) Exception */
|
|
START_EXCEPTION(0x1020, WDTExceptionTrap)
|
|
b WDTException
|
|
|
|
/* 0x1100 - Data TLB Miss Exception
|
|
* As the name implies, translation is not in the MMU, so search the
|
|
* page tables and fix it. The only purpose of this function is to
|
|
* load TLB entries from the page table if they exist.
|
|
*/
|
|
START_EXCEPTION(0x1100, DTLBMiss)
|
|
mtspr SPRN_SPRG_SCRATCH5, r10 /* Save some working registers */
|
|
mtspr SPRN_SPRG_SCRATCH6, r11
|
|
mtspr SPRN_SPRG_SCRATCH3, r12
|
|
mtspr SPRN_SPRG_SCRATCH4, r9
|
|
mfcr r12
|
|
mfspr r9, SPRN_PID
|
|
rlwimi r12, r9, 0, 0xff
|
|
mfspr r10, SPRN_DEAR /* Get faulting address */
|
|
|
|
/* If we are faulting a kernel address, we have to use the
|
|
* kernel page tables.
|
|
*/
|
|
lis r11, PAGE_OFFSET@h
|
|
cmplw r10, r11
|
|
blt+ 3f
|
|
lis r11, swapper_pg_dir@h
|
|
ori r11, r11, swapper_pg_dir@l
|
|
li r9, 0
|
|
mtspr SPRN_PID, r9 /* TLB will have 0 TID */
|
|
b 4f
|
|
|
|
/* Get the PGD for the current thread.
|
|
*/
|
|
3:
|
|
mfspr r11,SPRN_SPRG_THREAD
|
|
lwz r11,PGDIR(r11)
|
|
#ifdef CONFIG_PPC_KUAP
|
|
rlwinm. r9, r9, 0, 0xff
|
|
beq 5f /* Kuap fault */
|
|
#endif
|
|
4:
|
|
tophys(r11, r11)
|
|
rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
|
|
lwz r11, 0(r11) /* Get L1 entry */
|
|
andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */
|
|
beq 2f /* Bail if no table */
|
|
|
|
rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
|
|
lwz r11, 0(r11) /* Get Linux PTE */
|
|
li r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_READ
|
|
andc. r9, r9, r11 /* Check permission */
|
|
bne 5f
|
|
|
|
rlwinm r9, r11, 1, _PAGE_WRITE /* dirty => w */
|
|
and r9, r9, r11 /* hwwrite = dirty & w */
|
|
rlwimi r11, r9, 0, _PAGE_WRITE /* replace w by hwwrite */
|
|
|
|
/* Create TLB tag. This is the faulting address plus a static
|
|
* set of bits. These are size, valid, E, U0.
|
|
*/
|
|
li r9, 0x00c0
|
|
rlwimi r10, r9, 0, 20, 31
|
|
|
|
b finish_tlb_load
|
|
|
|
2: /* Check for possible large-page pmd entry */
|
|
rlwinm. r9, r11, 2, 22, 24
|
|
beq 5f
|
|
|
|
/* Create TLB tag. This is the faulting address, plus a static
|
|
* set of bits (valid, E, U0) plus the size from the PMD.
|
|
*/
|
|
ori r9, r9, 0x40
|
|
rlwimi r10, r9, 0, 20, 31
|
|
|
|
b finish_tlb_load
|
|
|
|
5:
|
|
/* The bailout. Restore registers to pre-exception conditions
|
|
* and call the heavyweights to help us out.
|
|
*/
|
|
mtspr SPRN_PID, r12
|
|
mtcrf 0x80, r12
|
|
mfspr r9, SPRN_SPRG_SCRATCH4
|
|
mfspr r12, SPRN_SPRG_SCRATCH3
|
|
mfspr r11, SPRN_SPRG_SCRATCH6
|
|
mfspr r10, SPRN_SPRG_SCRATCH5
|
|
b DataStorage
|
|
|
|
/* 0x1200 - Instruction TLB Miss Exception
|
|
* Nearly the same as above, except we get our information from different
|
|
* registers and bailout to a different point.
|
|
*/
|
|
START_EXCEPTION(0x1200, ITLBMiss)
|
|
mtspr SPRN_SPRG_SCRATCH5, r10 /* Save some working registers */
|
|
mtspr SPRN_SPRG_SCRATCH6, r11
|
|
mtspr SPRN_SPRG_SCRATCH3, r12
|
|
mtspr SPRN_SPRG_SCRATCH4, r9
|
|
mfcr r12
|
|
mfspr r9, SPRN_PID
|
|
rlwimi r12, r9, 0, 0xff
|
|
mfspr r10, SPRN_SRR0 /* Get faulting address */
|
|
|
|
/* If we are faulting a kernel address, we have to use the
|
|
* kernel page tables.
|
|
*/
|
|
lis r11, PAGE_OFFSET@h
|
|
cmplw r10, r11
|
|
blt+ 3f
|
|
lis r11, swapper_pg_dir@h
|
|
ori r11, r11, swapper_pg_dir@l
|
|
li r9, 0
|
|
mtspr SPRN_PID, r9 /* TLB will have 0 TID */
|
|
b 4f
|
|
|
|
/* Get the PGD for the current thread.
|
|
*/
|
|
3:
|
|
mfspr r11,SPRN_SPRG_THREAD
|
|
lwz r11,PGDIR(r11)
|
|
#ifdef CONFIG_PPC_KUAP
|
|
rlwinm. r9, r9, 0, 0xff
|
|
beq 5f /* Kuap fault */
|
|
#endif
|
|
4:
|
|
tophys(r11, r11)
|
|
rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
|
|
lwz r11, 0(r11) /* Get L1 entry */
|
|
andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */
|
|
beq 2f /* Bail if no table */
|
|
|
|
rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */
|
|
lwz r11, 0(r11) /* Get Linux PTE */
|
|
li r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
|
|
andc. r9, r9, r11 /* Check permission */
|
|
bne 5f
|
|
|
|
rlwinm r9, r11, 1, _PAGE_WRITE /* dirty => w */
|
|
and r9, r9, r11 /* hwwrite = dirty & w */
|
|
rlwimi r11, r9, 0, _PAGE_WRITE /* replace w by hwwrite */
|
|
|
|
/* Create TLB tag. This is the faulting address plus a static
|
|
* set of bits. These are size, valid, E, U0.
|
|
*/
|
|
li r9, 0x00c0
|
|
rlwimi r10, r9, 0, 20, 31
|
|
|
|
b finish_tlb_load
|
|
|
|
2: /* Check for possible large-page pmd entry */
|
|
rlwinm. r9, r11, 2, 22, 24
|
|
beq 5f
|
|
|
|
/* Create TLB tag. This is the faulting address, plus a static
|
|
* set of bits (valid, E, U0) plus the size from the PMD.
|
|
*/
|
|
ori r9, r9, 0x40
|
|
rlwimi r10, r9, 0, 20, 31
|
|
|
|
b finish_tlb_load
|
|
|
|
5:
|
|
/* The bailout. Restore registers to pre-exception conditions
|
|
* and call the heavyweights to help us out.
|
|
*/
|
|
mtspr SPRN_PID, r12
|
|
mtcrf 0x80, r12
|
|
mfspr r9, SPRN_SPRG_SCRATCH4
|
|
mfspr r12, SPRN_SPRG_SCRATCH3
|
|
mfspr r11, SPRN_SPRG_SCRATCH6
|
|
mfspr r10, SPRN_SPRG_SCRATCH5
|
|
b InstructionAccess
|
|
|
|
EXCEPTION(0x1300, Trap_13, unknown_exception)
|
|
EXCEPTION(0x1400, Trap_14, unknown_exception)
|
|
EXCEPTION(0x1500, Trap_15, unknown_exception)
|
|
EXCEPTION(0x1600, Trap_16, unknown_exception)
|
|
EXCEPTION(0x1700, Trap_17, unknown_exception)
|
|
EXCEPTION(0x1800, Trap_18, unknown_exception)
|
|
EXCEPTION(0x1900, Trap_19, unknown_exception)
|
|
EXCEPTION(0x1A00, Trap_1A, unknown_exception)
|
|
EXCEPTION(0x1B00, Trap_1B, unknown_exception)
|
|
EXCEPTION(0x1C00, Trap_1C, unknown_exception)
|
|
EXCEPTION(0x1D00, Trap_1D, unknown_exception)
|
|
EXCEPTION(0x1E00, Trap_1E, unknown_exception)
|
|
EXCEPTION(0x1F00, Trap_1F, unknown_exception)
|
|
|
|
/* Check for a single step debug exception while in an exception
|
|
* handler before state has been saved. This is to catch the case
|
|
* where an instruction that we are trying to single step causes
|
|
* an exception (eg ITLB/DTLB miss) and thus the first instruction of
|
|
* the exception handler generates a single step debug exception.
|
|
*
|
|
* If we get a debug trap on the first instruction of an exception handler,
|
|
* we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
|
|
* a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
|
|
* The exception handler was handling a non-critical interrupt, so it will
|
|
* save (and later restore) the MSR via SPRN_SRR1, which will still have
|
|
* the MSR_DE bit set.
|
|
*/
|
|
/* 0x2000 - Debug Exception */
|
|
START_EXCEPTION(0x2000, DebugTrap)
|
|
CRITICAL_EXCEPTION_PROLOG 0x2000 DebugTrap
|
|
|
|
/*
|
|
* If this is a single step or branch-taken exception in an
|
|
* exception entry sequence, it was probably meant to apply to
|
|
* the code where the exception occurred (since exception entry
|
|
* doesn't turn off DE automatically). We simulate the effect
|
|
* of turning off DE on entry to an exception handler by turning
|
|
* off DE in the SRR3 value and clearing the debug status.
|
|
*/
|
|
mfspr r10,SPRN_DBSR /* check single-step/branch taken */
|
|
andis. r10,r10,DBSR_IC@h
|
|
beq+ 2f
|
|
|
|
andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */
|
|
beq 1f /* branch and fix it up */
|
|
|
|
mfspr r10,SPRN_SRR2 /* Faulting instruction address */
|
|
cmplwi r10,0x2100
|
|
bgt+ 2f /* address above exception vectors */
|
|
|
|
/* here it looks like we got an inappropriate debug exception. */
|
|
1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */
|
|
lis r10,DBSR_IC@h /* clear the IC event */
|
|
mtspr SPRN_DBSR,r10
|
|
/* restore state and get out */
|
|
lwz r10,_CCR(r11)
|
|
lwz r0,GPR0(r11)
|
|
lwz r1,GPR1(r11)
|
|
mtcrf 0x80,r10
|
|
mtspr SPRN_SRR2,r12
|
|
mtspr SPRN_SRR3,r9
|
|
lwz r9,GPR9(r11)
|
|
lwz r12,GPR12(r11)
|
|
lwz r10,crit_r10@l(0)
|
|
lwz r11,crit_r11@l(0)
|
|
rfci
|
|
b .
|
|
|
|
/* continue normal handling for a critical exception... */
|
|
2: mfspr r4,SPRN_DBSR
|
|
stw r4,_ESR(r11) /* DebugException takes DBSR in _ESR */
|
|
prepare_transfer_to_handler
|
|
bl DebugException
|
|
b ret_from_crit_exc
|
|
|
|
/* Programmable Interval Timer (PIT) Exception. (from 0x1000) */
|
|
__HEAD
|
|
Decrementer:
|
|
EXCEPTION_PROLOG 0x1000 Decrementer
|
|
lis r0,TSR_PIS@h
|
|
mtspr SPRN_TSR,r0 /* Clear the PIT exception */
|
|
prepare_transfer_to_handler
|
|
bl timer_interrupt
|
|
b interrupt_return
|
|
|
|
/* Fixed Interval Timer (FIT) Exception. (from 0x1010) */
|
|
__HEAD
|
|
FITException:
|
|
EXCEPTION_PROLOG 0x1010 FITException
|
|
prepare_transfer_to_handler
|
|
bl unknown_exception
|
|
b interrupt_return
|
|
|
|
/* Watchdog Timer (WDT) Exception. (from 0x1020) */
|
|
__HEAD
|
|
WDTException:
|
|
CRITICAL_EXCEPTION_PROLOG 0x1020 WDTException
|
|
prepare_transfer_to_handler
|
|
bl WatchdogException
|
|
b ret_from_crit_exc
|
|
|
|
/* Other PowerPC processors, namely those derived from the 6xx-series
|
|
* have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
|
|
* However, for the 4xx-series processors these are neither defined nor
|
|
* reserved.
|
|
*/
|
|
|
|
__HEAD
|
|
/* Damn, I came up one instruction too many to fit into the
|
|
* exception space :-). Both the instruction and data TLB
|
|
* miss get to this point to load the TLB.
|
|
* r10 - TLB_TAG value
|
|
* r11 - Linux PTE
|
|
* r9 - available to use
|
|
* PID - loaded with proper value when we get here
|
|
* Upon exit, we reload everything and RFI.
|
|
* Actually, it will fit now, but oh well.....a common place
|
|
* to load the TLB.
|
|
*/
|
|
tlb_4xx_index:
|
|
.long 0
|
|
finish_tlb_load:
|
|
/*
|
|
* Clear out the software-only bits in the PTE to generate the
|
|
* TLB_DATA value. These are the bottom 2 bits of the RPM, the
|
|
* 4 bits of the zone field, and M.
|
|
*/
|
|
li r9, 0x0cf2
|
|
andc r11, r11, r9
|
|
rlwimi r11, r10, 8, 24, 27 /* Copy 4 upper address bit into zone */
|
|
|
|
/* load the next available TLB index. */
|
|
lwz r9, tlb_4xx_index@l(0)
|
|
addi r9, r9, 1
|
|
andi. r9, r9, PPC40X_TLB_SIZE - 1
|
|
stw r9, tlb_4xx_index@l(0)
|
|
|
|
tlbwe r11, r9, TLB_DATA /* Load TLB LO */
|
|
tlbwe r10, r9, TLB_TAG /* Load TLB HI */
|
|
|
|
/* Done...restore registers and get out of here.
|
|
*/
|
|
mtspr SPRN_PID, r12
|
|
mtcrf 0x80, r12
|
|
mfspr r9, SPRN_SPRG_SCRATCH4
|
|
mfspr r12, SPRN_SPRG_SCRATCH3
|
|
mfspr r11, SPRN_SPRG_SCRATCH6
|
|
mfspr r10, SPRN_SPRG_SCRATCH5
|
|
rfi /* Should sync shadow TLBs */
|
|
b . /* prevent prefetch past rfi */
|
|
|
|
/* This is where the main kernel code starts.
|
|
*/
|
|
start_here:
|
|
|
|
/* ptr to current */
|
|
lis r2,init_task@h
|
|
ori r2,r2,init_task@l
|
|
|
|
/* ptr to phys current thread */
|
|
tophys(r4,r2)
|
|
addi r4,r4,THREAD /* init task's THREAD */
|
|
mtspr SPRN_SPRG_THREAD,r4
|
|
|
|
/* stack */
|
|
lis r1,init_thread_union@ha
|
|
addi r1,r1,init_thread_union@l
|
|
li r0,0
|
|
stwu r0,THREAD_SIZE-STACK_FRAME_MIN_SIZE(r1)
|
|
|
|
bl early_init /* We have to do this with MMU on */
|
|
|
|
/*
|
|
* Decide what sort of machine this is and initialize the MMU.
|
|
*/
|
|
#ifdef CONFIG_KASAN
|
|
bl kasan_early_init
|
|
#endif
|
|
li r3,0
|
|
mr r4,r31
|
|
bl machine_init
|
|
bl MMU_init
|
|
|
|
/* Go back to running unmapped so we can load up new values
|
|
* and change to using our exception vectors.
|
|
* On the 4xx, all we have to do is invalidate the TLB to clear
|
|
* the old 16M byte TLB mappings.
|
|
*/
|
|
lis r4,2f@h
|
|
ori r4,r4,2f@l
|
|
tophys(r4,r4)
|
|
lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
|
|
ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
|
|
mtspr SPRN_SRR0,r4
|
|
mtspr SPRN_SRR1,r3
|
|
rfi
|
|
b . /* prevent prefetch past rfi */
|
|
|
|
/* Load up the kernel context */
|
|
2:
|
|
sync /* Flush to memory before changing TLB */
|
|
tlbia
|
|
isync /* Flush shadow TLBs */
|
|
|
|
/* set up the PTE pointers for the Abatron bdiGDB.
|
|
*/
|
|
lis r6, swapper_pg_dir@h
|
|
ori r6, r6, swapper_pg_dir@l
|
|
lis r5, abatron_pteptrs@h
|
|
ori r5, r5, abatron_pteptrs@l
|
|
stw r5, 0xf0(0) /* Must match your Abatron config file */
|
|
tophys(r5,r5)
|
|
stw r6, 0(r5)
|
|
|
|
/* Now turn on the MMU for real! */
|
|
lis r4,MSR_KERNEL@h
|
|
ori r4,r4,MSR_KERNEL@l
|
|
lis r3,start_kernel@h
|
|
ori r3,r3,start_kernel@l
|
|
mtspr SPRN_SRR0,r3
|
|
mtspr SPRN_SRR1,r4
|
|
rfi /* enable MMU and jump to start_kernel */
|
|
b . /* prevent prefetch past rfi */
|
|
|
|
/* Set up the initial MMU state so we can do the first level of
|
|
* kernel initialization. This maps the first 32 MBytes of memory 1:1
|
|
* virtual to physical and more importantly sets the cache mode.
|
|
*/
|
|
SYM_FUNC_START_LOCAL(initial_mmu)
|
|
tlbia /* Invalidate all TLB entries */
|
|
isync
|
|
|
|
/* We should still be executing code at physical address 0x0000xxxx
|
|
* at this point. However, start_here is at virtual address
|
|
* 0xC000xxxx. So, set up a TLB mapping to cover this once
|
|
* translation is enabled.
|
|
*/
|
|
|
|
lis r3,KERNELBASE@h /* Load the kernel virtual address */
|
|
ori r3,r3,KERNELBASE@l
|
|
tophys(r4,r3) /* Load the kernel physical address */
|
|
|
|
iccci r0,r3 /* Invalidate the i-cache before use */
|
|
|
|
/* Load the kernel PID.
|
|
*/
|
|
li r0,0
|
|
mtspr SPRN_PID,r0
|
|
sync
|
|
|
|
/* Configure and load one entry into TLB slots 63 */
|
|
clrrwi r4,r4,10 /* Mask off the real page number */
|
|
ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
|
|
|
|
clrrwi r3,r3,10 /* Mask off the effective page number */
|
|
ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
|
|
|
|
li r0,63 /* TLB slot 63 */
|
|
|
|
tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
|
|
tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
|
|
|
|
li r0,62 /* TLB slot 62 */
|
|
addis r4,r4,SZ_16M@h
|
|
addis r3,r3,SZ_16M@h
|
|
tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
|
|
tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
|
|
|
|
isync
|
|
|
|
/* Establish the exception vector base
|
|
*/
|
|
lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */
|
|
tophys(r0,r4) /* Use the physical address */
|
|
mtspr SPRN_EVPR,r0
|
|
|
|
blr
|
|
SYM_FUNC_END(initial_mmu)
|
|
|
|
_GLOBAL(abort)
|
|
mfspr r13,SPRN_DBCR0
|
|
oris r13,r13,DBCR0_RST_SYSTEM@h
|
|
mtspr SPRN_DBCR0,r13
|