mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
038a9c3d1e
Intersil ISL68137 is a digital output 7-phase configurable PWM controller with an AVSBus interface. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
73 lines
2.1 KiB
Plaintext
73 lines
2.1 KiB
Plaintext
Kernel driver isl68137
|
|
======================
|
|
|
|
Supported chips:
|
|
* Intersil ISL68137
|
|
Prefix: 'isl68137'
|
|
Addresses scanned: -
|
|
Datasheet: Publicly available at the Intersil website
|
|
https://www.intersil.com/content/dam/Intersil/documents/isl6/isl68137.pdf
|
|
|
|
Authors:
|
|
Maxim Sloyko <maxims@google.com>
|
|
Robert Lippert <rlippert@google.com>
|
|
Patrick Venture <venture@google.com>
|
|
|
|
Description
|
|
-----------
|
|
|
|
Intersil ISL68137 is a digital output 7-phase configurable PWM
|
|
controller with an AVSBus interface.
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver does not probe for PMBus devices. You will have to instantiate
|
|
devices explicitly.
|
|
|
|
The ISL68137 AVS operation mode must be enabled/disabled at runtime.
|
|
|
|
Beyond the normal sysfs pmbus attributes, the driver exposes a control attribute.
|
|
|
|
Additional Sysfs attributes
|
|
---------------------------
|
|
|
|
avs(0|1)_enable Controls the AVS state of each rail.
|
|
|
|
curr1_label "iin"
|
|
curr1_input Measured input current
|
|
curr1_crit Critical maximum current
|
|
curr1_crit_alarm Current critical high alarm
|
|
|
|
curr[2-3]_label "iout[1-2]"
|
|
curr[2-3]_input Measured output current
|
|
curr[2-3]_crit Critical maximum current
|
|
curr[2-3]_crit_alarm Current critical high alarm
|
|
|
|
in1_label "vin"
|
|
in1_input Measured input voltage
|
|
in1_lcrit Critical minimum input voltage
|
|
in1_lcrit_alarm Input voltage critical low alarm
|
|
in1_crit Critical maximum input voltage
|
|
in1_crit_alarm Input voltage critical high alarm
|
|
|
|
in[2-3]_label "vout[1-2]"
|
|
in[2-3]_input Measured output voltage
|
|
in[2-3]_lcrit Critical minimum output voltage
|
|
in[2-3]_lcrit_alarm Output voltage critical low alarm
|
|
in[2-3]_crit Critical maximum output voltage
|
|
in[2-3]_crit_alarm Output voltage critical high alarm
|
|
|
|
power1_label "pin"
|
|
power1_input Measured input power
|
|
power1_alarm Input power high alarm
|
|
|
|
power[2-3]_label "pout[1-2]"
|
|
power[2-3]_input Measured output power
|
|
|
|
temp[1-3]_input Measured temperature
|
|
temp[1-3]_crit Critical high temperature
|
|
temp[1-3]_crit_alarm Chip temperature critical high alarm
|
|
temp[1-3]_max Maximum temperature
|
|
temp[1-3]_max_alarm Chip temperature high alarm
|