mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 19:45:06 +08:00
51b99b3905
The mmc1 pins are used for SDIO with a wifi chip. The function mmc_sdio_switch_hs() only checks for MMC_CAP_SD_HIGHSPEED and not for MMC_CAP_MMC_HIGHSPEED, so cap-mmc-highspeed can be removed. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
725 lines
15 KiB
Plaintext
725 lines
15 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2018 MundoReader S.L.
|
|
* Author: Heiko Stuebner <heiko.stuebner@bq.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/i2c/i2c.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "rk3188.dtsi"
|
|
|
|
/ {
|
|
model = "BQ Edison2 Quad-Core";
|
|
compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188";
|
|
|
|
memory@60000000 {
|
|
device_type = "memory";
|
|
reg = <0x60000000 0x80000000>;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
power-supply = <&vsys>;
|
|
pwms = <&pwm1 0 25000>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwr_key &usb_int>;
|
|
|
|
power {
|
|
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
label = "GPIO Key Power";
|
|
linux,input-type = <1>;
|
|
debounce-interval = <100>;
|
|
wakeup-source;
|
|
};
|
|
|
|
wake_on_usb: wake-on-usb {
|
|
label = "Wake-on-USB";
|
|
gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WAKEUP>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
gpio-poweroff {
|
|
compatible = "gpio-poweroff";
|
|
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwr_hold>;
|
|
/* only drive the pin low until device is off */
|
|
active-delay-ms = <3000>;
|
|
};
|
|
|
|
lvds-encoder {
|
|
compatible = "ti,sn75lvds83", "lvds-encoder";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
lvds_in_vop0: endpoint {
|
|
remote-endpoint = <&vop0_out_lvds>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
lvds_out_panel: endpoint {
|
|
remote-endpoint = <&panel_in_lvds>;
|
|
};
|
|
};
|
|
};
|
|
|
|
panel {
|
|
compatible = "innolux,ee101ia-01d", "panel-lvds";
|
|
backlight = <&backlight>;
|
|
|
|
/* pin LCD_CS, Nshtdn input of lvds-encoder */
|
|
enable-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_cs>;
|
|
power-supply = <&vcc_lcd>;
|
|
|
|
data-mapping = "vesa-24";
|
|
height-mm = <163>;
|
|
width-mm = <261>;
|
|
|
|
panel-timing {
|
|
clock-frequency = <72000000>;
|
|
hactive = <1280>;
|
|
vactive = <800>;
|
|
hback-porch = <160>;
|
|
hfront-porch = <16>;
|
|
hsync-len = <10>;
|
|
vback-porch = <23>;
|
|
vfront-porch = <12>;
|
|
vsync-len = <3>;
|
|
};
|
|
|
|
port {
|
|
panel_in_lvds: endpoint {
|
|
remote-endpoint = <&lvds_out_panel>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&hym8563>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_reg_on>;
|
|
reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
avdd_cif: cif-avdd-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "avdd-cif";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cif_avdd_en>;
|
|
startup-delay-us = <100000>;
|
|
vin-supply = <&vcc28_cif>;
|
|
};
|
|
|
|
vcc_5v: vcc-5v-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc-5v";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&v5_drv>;
|
|
vin-supply = <&vsys>;
|
|
};
|
|
|
|
vcc_lcd: lcd-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc-lcd";
|
|
gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_en>;
|
|
startup-delay-us = <50000>;
|
|
vin-supply = <&vcc_io>;
|
|
};
|
|
|
|
vcc_otg: usb-otg-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc-otg";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&otg_drv>;
|
|
startup-delay-us = <100000>;
|
|
vin-supply = <&vcc_5v>;
|
|
};
|
|
|
|
vcc_sd: sdmmc-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc-sd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_pwr>;
|
|
startup-delay-us = <100000>;
|
|
vin-supply = <&vcc_io>;
|
|
};
|
|
|
|
vccq_emmc: emmc-vccq-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vccq-emmc";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
vin-supply = <&vcc_io>;
|
|
};
|
|
|
|
/* supplied from the bq24196 */
|
|
vsys: vsys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vsys";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_arm>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <&vdd_arm>;
|
|
};
|
|
|
|
&cpu2 {
|
|
cpu-supply = <&vdd_arm>;
|
|
};
|
|
|
|
&cpu3 {
|
|
cpu-supply = <&vdd_arm>;
|
|
};
|
|
|
|
&cru {
|
|
assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
|
|
<&cru ACLK_CPU>,
|
|
<&cru HCLK_CPU>, <&cru PCLK_CPU>,
|
|
<&cru ACLK_PERI>, <&cru HCLK_PERI>,
|
|
<&cru PCLK_PERI>;
|
|
assigned-clock-rates = <594000000>, <504000000>,
|
|
<300000000>,
|
|
<150000000>, <75000000>,
|
|
<300000000>, <150000000>,
|
|
<75000000>;
|
|
};
|
|
|
|
&emmc {
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd>;
|
|
vmmc-supply = <&vcc_io>;
|
|
vqmmc-supply = <&vccq_emmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
lis3de: accelerometer@29 {
|
|
compatible = "st,lis3de";
|
|
reg = <0x29>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB7 IRQ_TYPE_EDGE_RISING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gsensor_int>;
|
|
rotation-matrix = "1", "0", "0",
|
|
"0", "-1", "0",
|
|
"0", "0", "1";
|
|
vdd-supply = <&vcc_io>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
tmp108@48 {
|
|
compatible = "ti,tmp108";
|
|
reg = <0x48>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tmp_alrt>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
hym8563: rtc@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rtc_int>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "xin32k";
|
|
};
|
|
|
|
bat: battery@55 {
|
|
compatible = "ti,bq27541";
|
|
reg = <0x55>;
|
|
power-supplies = <&bq24196>;
|
|
};
|
|
|
|
act8846: pmic@5a {
|
|
compatible = "active-semi,act8846";
|
|
reg = <0x5a>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dvs0_ctl &pmic_int>;
|
|
|
|
vp1-supply = <&vsys>;
|
|
vp2-supply = <&vsys>;
|
|
vp3-supply = <&vsys>;
|
|
vp4-supply = <&vsys>;
|
|
inl1-supply = <&vcc_io>;
|
|
inl2-supply = <&vsys>;
|
|
inl3-supply = <&vsys>;
|
|
|
|
regulators {
|
|
vcc_ddr: REG1 {
|
|
regulator-name = "VCC_DDR";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_log: REG2 {
|
|
regulator-name = "VDD_LOG";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_arm: REG3 {
|
|
regulator-name = "VDD_ARM";
|
|
regulator-min-microvolt = <875000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_io: vcc_hdmi: REG4 {
|
|
regulator-name = "VCC_IO";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_10: REG5 {
|
|
regulator-name = "VDD_10";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_12: REG6 {
|
|
regulator-name = "VDD_12";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc18_cif: REG7 {
|
|
regulator-name = "VCC18_CIF";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcca_33: REG8 {
|
|
regulator-name = "VCCA_33";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_tp: REG9 {
|
|
regulator-name = "VCC_TP";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vccio_wl: REG10 {
|
|
regulator-name = "VCCIO_WL";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_18: REG11 {
|
|
regulator-name = "VCC_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc28_cif: REG12 {
|
|
regulator-name = "VCC28_CIF";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
bq24196: charger@6b {
|
|
compatible = "ti,bq24196";
|
|
reg = <0x6b>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PD7 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&charger_int &chg_ctl &otg_en>;
|
|
ti,system-minimum-microvolt = <3200000>;
|
|
monitored-battery = <&bat>;
|
|
omit-battery-class;
|
|
|
|
usb_otg_vbus: usb-otg-vbus { };
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
ft5606: touchscreen@3e {
|
|
compatible = "edt,edt-ft5506";
|
|
reg = <0x3e>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tp_int &tp_rst>;
|
|
reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
|
|
touchscreen-inverted-y;
|
|
/* hw ts resolution does not match display */
|
|
touchscreen-size-y = <1024>;
|
|
touchscreen-size-x = <768>;
|
|
touchscreen-swapped-x-y;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
rt5616: codec@1b {
|
|
compatible = "realtek,rt5616";
|
|
reg = <0x1b>;
|
|
clocks = <&cru SCLK_I2S0>;
|
|
clock-names = "mclk";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&i2s0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
|
|
vmmc-supply = <&vcc_sd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc1 {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
|
|
vmmcq-supply = <&vccio_wl>;
|
|
status = "okay";
|
|
|
|
brcmf: wifi@1 {
|
|
compatible = "brcm,bcm4329-fmac";
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
|
|
interrupt-names = "host-wake";
|
|
brcm,drive-strength = <5>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_host_wake>;
|
|
};
|
|
};
|
|
|
|
&pwm1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
pcfg_output_high: pcfg-output-high {
|
|
output-high;
|
|
};
|
|
|
|
pcfg_output_low: pcfg-output-low {
|
|
output-low;
|
|
};
|
|
|
|
act8846 {
|
|
dvs0_ctl: dvs0-ctl {
|
|
rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>;
|
|
};
|
|
|
|
pmic_int: pmic-int {
|
|
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
bq24196 {
|
|
charger_int: charger-int {
|
|
rockchip,pins = <0 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
/* pin hog to make it select usb profile */
|
|
chg_ctl: chg-ctl {
|
|
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
|
|
/* low: charging, high: complete, fault: blinking */
|
|
chg_det: chg-det {
|
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
/* charging enabled when pin low and register set */
|
|
chg_en: chg-en {
|
|
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
|
|
};
|
|
|
|
/* bq29196 powergood (when low) signal */
|
|
dc_det: dc-det {
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
/* wire bq24196 otg pin to high, to enable 500mA charging */
|
|
otg_en: otg-en {
|
|
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
};
|
|
|
|
camera {
|
|
cif0_pdn: cif0-pdn {
|
|
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
cif1_pdn: cif1-pdn {
|
|
rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
cif_avdd_en: cif-avdd-en {
|
|
rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
display {
|
|
lcd_cs: lcd-cs {
|
|
rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
lcd_en: lcd-en {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
ft5606 {
|
|
tp_int: tp-int {
|
|
rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
tp_rst: tp-rst {
|
|
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hdmi {
|
|
hdmi_int: hdmi-int {
|
|
rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
hdmi_rst: hdmi-rst {
|
|
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hym8563 {
|
|
rtc_int: rtc-int {
|
|
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
keys {
|
|
pwr_hold: pwr-hold {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
pwr_key: pwr-key {
|
|
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
lis3de {
|
|
gsensor_int: gsensor-int {
|
|
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
mmc {
|
|
sdmmc_pwr: sdmmc-pwr {
|
|
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
tmp108 {
|
|
tmp_alrt: tmp-alrt {
|
|
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
v5_drv: v5-drv {
|
|
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
otg_drv: otg-drv {
|
|
rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
usb_int: usb-int {
|
|
rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
rk903 {
|
|
bt_host_wake: bt-host-wake {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
bt_reg_on: bt-reg-on {
|
|
rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
/* pin hog to pull the reset high */
|
|
bt_rst: bt-rst {
|
|
rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
|
|
bt_wake: bt-wake {
|
|
rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
wifi_host_wake: wifi-host-wake {
|
|
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
wifi_reg_on: wifi-reg-on {
|
|
rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcc_18>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spdif {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm43438-bt";
|
|
max-speed = <2000000>;
|
|
device-wakeup-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
host-wakeup-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
shutdown-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_host_wake &bt_reg_on &bt_rst &bt_wake>;
|
|
};
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-0 = <&uart3_xfer &uart3_cts &uart3_rts>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop0_out {
|
|
vop0_out_lvds: endpoint {
|
|
remote-endpoint = <&lvds_in_vop0>;
|
|
};
|
|
};
|
|
|
|
&vop1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcdc1_dclk &lcdc1_den &lcdc1_hsync
|
|
&lcdc1_vsync &lcdc1_rgb24>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdt {
|
|
status = "okay";
|
|
};
|