mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-23 12:14:10 +08:00
f629acc6f2
According to chapter 6 of DesignWare Cores Ethernet PCS (version 3.20a) and custom design manual, add a configuration flow for switching interface mode. If the interface changes, the following setting is required: 1. wait VR_XS_PCS_DIG_STS bit(4, 2) [PSEQ_STATE] = 100b (Power-Good) 2. write SR_XS_PCS_CTRL2 to select various PCS type 3. write SR_PMA_CTRL1 and/or SR_XS_PCS_CTRL1 for link speed 4. program PMA registers 5. write VR_XS_PCS_DIG_CTRL1 bit(15) [VR_RST] = 1b (Vendor-Specific Soft Reset) 6. wait for VR_XS_PCS_DIG_CTRL1 bit(15) [VR_RST] to get cleared Only 10GBASE-R/SGMII/1000BASE-X modes are planned for the current Wangxun devices. And there is a quirk for Wangxun devices to switch mode although the interface in phylink state has not changed, since PCS will change to default 10GBASE-R when the ethernet driver(txgbe) do LAN reset. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| acpi | ||
| asm-generic | ||
| clocksource | ||
| crypto | ||
| drm | ||
| dt-bindings | ||
| keys | ||
| kunit | ||
| kvm | ||
| linux | ||
| math-emu | ||
| media | ||
| memory | ||
| misc | ||
| net | ||
| pcmcia | ||
| ras | ||
| rdma | ||
| rv | ||
| scsi | ||
| soc | ||
| sound | ||
| target | ||
| trace | ||
| uapi | ||
| ufs | ||
| vdso | ||
| video | ||
| xen | ||