mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 19:14:30 +08:00
a11a5debdf
Split st,stm32-fmc2-ebi.yaml specific properties into
st,stm32-fmc2-ebi-props.yaml, split memory-controller bus peripheral
properties into mc-peripheral-props.yaml, reference the
st,stm32-fmc2-ebi-props.yaml in mc-peripheral-props.yaml and reference
the mc-peripheral-props.yaml in micrel,ks8851.yaml.
This way, the FMC2 controller properties in Micrel KSZ8851MLL ethernet
controller node can be properly validated.
Fixes the following warning:
arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dtb: ethernet@1,0:
Unevaluated properties are not allowed ('bank-width', 'st,fmc2-ebi-cs-mux-enable', ... 'st,fmc2-ebi-cs-write-data-hold-ns' were unexpected)
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220928181944.194808-1-marex@denx.de
[krzk: trim warning message]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
119 lines
3.2 KiB
YAML
119 lines
3.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
|
|
|
|
description: |
|
|
The FMC2 functional block makes the interface with: synchronous and
|
|
asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
|
|
peripherals) and NAND flash memories.
|
|
Its main purposes are:
|
|
- to translate AXI transactions into the appropriate external device
|
|
protocol
|
|
- to meet the access time requirements of the external devices
|
|
All external devices share the addresses, data and control signals with the
|
|
controller. Each external device is accessed by means of a unique Chip
|
|
Select. The FMC2 performs only one access at a time to an external device.
|
|
|
|
maintainers:
|
|
- Christophe Kerello <christophe.kerello@foss.st.com>
|
|
|
|
properties:
|
|
compatible:
|
|
const: st,stm32mp1-fmc2-ebi
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
"#address-cells":
|
|
const: 2
|
|
|
|
"#size-cells":
|
|
const: 1
|
|
|
|
ranges:
|
|
description: |
|
|
Reflects the memory layout with four integer values per bank. Format:
|
|
<bank-number> 0 <address of the bank> <size>
|
|
|
|
patternProperties:
|
|
"^.*@[0-4],[a-f0-9]+$":
|
|
type: object
|
|
$ref: mc-peripheral-props.yaml#
|
|
|
|
required:
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- ranges
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/stm32mp1-clks.h>
|
|
#include <dt-bindings/reset/stm32mp1-resets.h>
|
|
memory-controller@58002000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "st,stm32mp1-fmc2-ebi";
|
|
reg = <0x58002000 0x1000>;
|
|
clocks = <&rcc FMC_K>;
|
|
resets = <&rcc FMC_R>;
|
|
|
|
ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
|
|
<1 0 0x64000000 0x04000000>, /* EBI CS 2 */
|
|
<2 0 0x68000000 0x04000000>, /* EBI CS 3 */
|
|
<3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
|
|
<4 0 0x80000000 0x10000000>; /* NAND */
|
|
|
|
psram@0,0 {
|
|
compatible = "mtd-ram";
|
|
reg = <0 0x00000000 0x100000>;
|
|
bank-width = <2>;
|
|
|
|
st,fmc2-ebi-cs-transaction-type = <1>;
|
|
st,fmc2-ebi-cs-address-setup-ns = <60>;
|
|
st,fmc2-ebi-cs-data-setup-ns = <30>;
|
|
st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
|
|
};
|
|
|
|
nand-controller@4,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32mp1-fmc2-nfc";
|
|
reg = <4 0x00000000 0x1000>,
|
|
<4 0x08010000 0x1000>,
|
|
<4 0x08020000 0x1000>,
|
|
<4 0x01000000 0x1000>,
|
|
<4 0x09010000 0x1000>,
|
|
<4 0x09020000 0x1000>;
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
|
|
<&mdma1 20 0x2 0x12000a08 0x0 0x0>,
|
|
<&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
|
|
dma-names = "tx", "rx", "ecc";
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
nand-on-flash-bbt;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|