linux/tools/testing/selftests/kvm/dirty_log_test.c
Andrew Jones 87a802d93e KVM: selftests: Introduce num-pages conversion utilities
Guests and hosts don't have to have the same page size. This means
calculations are necessary when selecting the number of guest pages
to allocate in order to ensure the number is compatible with the
host. Provide utilities to help with those calculations and apply
them where appropriate.

We also revert commit bffed38d4f ("kvm: selftests: aarch64:
dirty_log_test: fix unaligned memslot size") and then use
vm_adjust_num_guest_pages() there instead.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-24 20:05:23 +01:00

510 lines
14 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* KVM dirty page logging test
*
* Copyright (C) 2018, Red Hat, Inc.
*/
#define _GNU_SOURCE /* for program_invocation_name */
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <time.h>
#include <pthread.h>
#include <linux/bitmap.h>
#include <linux/bitops.h>
#include "test_util.h"
#include "kvm_util.h"
#include "processor.h"
#define VCPU_ID 1
/* The memory slot index to track dirty pages */
#define TEST_MEM_SLOT_INDEX 1
/* Default guest test virtual memory offset */
#define DEFAULT_GUEST_TEST_MEM 0xc0000000
/* How many pages to dirty for each guest loop */
#define TEST_PAGES_PER_LOOP 1024
/* How many host loops to run (one KVM_GET_DIRTY_LOG for each loop) */
#define TEST_HOST_LOOP_N 32UL
/* Interval for each host loop (ms) */
#define TEST_HOST_LOOP_INTERVAL 10UL
/* Dirty bitmaps are always little endian, so we need to swap on big endian */
#if defined(__s390x__)
# define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7)
# define test_bit_le(nr, addr) \
test_bit((nr) ^ BITOP_LE_SWIZZLE, addr)
# define set_bit_le(nr, addr) \
set_bit((nr) ^ BITOP_LE_SWIZZLE, addr)
# define clear_bit_le(nr, addr) \
clear_bit((nr) ^ BITOP_LE_SWIZZLE, addr)
# define test_and_set_bit_le(nr, addr) \
test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, addr)
# define test_and_clear_bit_le(nr, addr) \
test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, addr)
#else
# define test_bit_le test_bit
# define set_bit_le set_bit
# define clear_bit_le clear_bit
# define test_and_set_bit_le test_and_set_bit
# define test_and_clear_bit_le test_and_clear_bit
#endif
/*
* Guest/Host shared variables. Ensure addr_gva2hva() and/or
* sync_global_to/from_guest() are used when accessing from
* the host. READ/WRITE_ONCE() should also be used with anything
* that may change.
*/
static uint64_t host_page_size;
static uint64_t guest_page_size;
static uint64_t guest_num_pages;
static uint64_t random_array[TEST_PAGES_PER_LOOP];
static uint64_t iteration;
/*
* Guest physical memory offset of the testing memory slot.
* This will be set to the topmost valid physical address minus
* the test memory size.
*/
static uint64_t guest_test_phys_mem;
/*
* Guest virtual memory offset of the testing memory slot.
* Must not conflict with identity mapped test code.
*/
static uint64_t guest_test_virt_mem = DEFAULT_GUEST_TEST_MEM;
/*
* Continuously write to the first 8 bytes of a random pages within
* the testing memory region.
*/
static void guest_code(void)
{
uint64_t addr;
int i;
/*
* On s390x, all pages of a 1M segment are initially marked as dirty
* when a page of the segment is written to for the very first time.
* To compensate this specialty in this test, we need to touch all
* pages during the first iteration.
*/
for (i = 0; i < guest_num_pages; i++) {
addr = guest_test_virt_mem + i * guest_page_size;
*(uint64_t *)addr = READ_ONCE(iteration);
}
while (true) {
for (i = 0; i < TEST_PAGES_PER_LOOP; i++) {
addr = guest_test_virt_mem;
addr += (READ_ONCE(random_array[i]) % guest_num_pages)
* guest_page_size;
addr &= ~(host_page_size - 1);
*(uint64_t *)addr = READ_ONCE(iteration);
}
/* Tell the host that we need more random numbers */
GUEST_SYNC(1);
}
}
/* Host variables */
static bool host_quit;
/* Points to the test VM memory region on which we track dirty logs */
static void *host_test_mem;
static uint64_t host_num_pages;
/* For statistics only */
static uint64_t host_dirty_count;
static uint64_t host_clear_count;
static uint64_t host_track_next_count;
/*
* We use this bitmap to track some pages that should have its dirty
* bit set in the _next_ iteration. For example, if we detected the
* page value changed to current iteration but at the same time the
* page bit is cleared in the latest bitmap, then the system must
* report that write in the next get dirty log call.
*/
static unsigned long *host_bmap_track;
static void generate_random_array(uint64_t *guest_array, uint64_t size)
{
uint64_t i;
for (i = 0; i < size; i++)
guest_array[i] = random();
}
static void *vcpu_worker(void *data)
{
int ret;
struct kvm_vm *vm = data;
uint64_t *guest_array;
uint64_t pages_count = 0;
struct kvm_run *run;
run = vcpu_state(vm, VCPU_ID);
guest_array = addr_gva2hva(vm, (vm_vaddr_t)random_array);
generate_random_array(guest_array, TEST_PAGES_PER_LOOP);
while (!READ_ONCE(host_quit)) {
/* Let the guest dirty the random pages */
ret = _vcpu_run(vm, VCPU_ID);
TEST_ASSERT(ret == 0, "vcpu_run failed: %d\n", ret);
if (get_ucall(vm, VCPU_ID, NULL) == UCALL_SYNC) {
pages_count += TEST_PAGES_PER_LOOP;
generate_random_array(guest_array, TEST_PAGES_PER_LOOP);
} else {
TEST_ASSERT(false,
"Invalid guest sync status: "
"exit_reason=%s\n",
exit_reason_str(run->exit_reason));
}
}
DEBUG("Dirtied %"PRIu64" pages\n", pages_count);
return NULL;
}
static void vm_dirty_log_verify(enum vm_guest_mode mode, unsigned long *bmap)
{
uint64_t step = vm_num_host_pages(mode, 1);
uint64_t page;
uint64_t *value_ptr;
for (page = 0; page < host_num_pages; page += step) {
value_ptr = host_test_mem + page * host_page_size;
/* If this is a special page that we were tracking... */
if (test_and_clear_bit_le(page, host_bmap_track)) {
host_track_next_count++;
TEST_ASSERT(test_bit_le(page, bmap),
"Page %"PRIu64" should have its dirty bit "
"set in this iteration but it is missing",
page);
}
if (test_bit_le(page, bmap)) {
host_dirty_count++;
/*
* If the bit is set, the value written onto
* the corresponding page should be either the
* previous iteration number or the current one.
*/
TEST_ASSERT(*value_ptr == iteration ||
*value_ptr == iteration - 1,
"Set page %"PRIu64" value %"PRIu64
" incorrect (iteration=%"PRIu64")",
page, *value_ptr, iteration);
} else {
host_clear_count++;
/*
* If cleared, the value written can be any
* value smaller or equals to the iteration
* number. Note that the value can be exactly
* (iteration-1) if that write can happen
* like this:
*
* (1) increase loop count to "iteration-1"
* (2) write to page P happens (with value
* "iteration-1")
* (3) get dirty log for "iteration-1"; we'll
* see that page P bit is set (dirtied),
* and not set the bit in host_bmap_track
* (4) increase loop count to "iteration"
* (which is current iteration)
* (5) get dirty log for current iteration,
* we'll see that page P is cleared, with
* value "iteration-1".
*/
TEST_ASSERT(*value_ptr <= iteration,
"Clear page %"PRIu64" value %"PRIu64
" incorrect (iteration=%"PRIu64")",
page, *value_ptr, iteration);
if (*value_ptr == iteration) {
/*
* This page is _just_ modified; it
* should report its dirtyness in the
* next run
*/
set_bit_le(page, host_bmap_track);
}
}
}
}
static struct kvm_vm *create_vm(enum vm_guest_mode mode, uint32_t vcpuid,
uint64_t extra_mem_pages, void *guest_code)
{
struct kvm_vm *vm;
uint64_t extra_pg_pages = extra_mem_pages / 512 * 2;
vm = _vm_create(mode, DEFAULT_GUEST_PHY_PAGES + extra_pg_pages, O_RDWR);
kvm_vm_elf_load(vm, program_invocation_name, 0, 0);
#ifdef __x86_64__
vm_create_irqchip(vm);
#endif
vm_vcpu_add_default(vm, vcpuid, guest_code);
return vm;
}
#define DIRTY_MEM_BITS 30 /* 1G */
#define PAGE_SHIFT_4K 12
static void run_test(enum vm_guest_mode mode, unsigned long iterations,
unsigned long interval, uint64_t phys_offset)
{
pthread_t vcpu_thread;
struct kvm_vm *vm;
unsigned long *bmap;
/*
* We reserve page table for 2 times of extra dirty mem which
* will definitely cover the original (1G+) test range. Here
* we do the calculation with 4K page size which is the
* smallest so the page number will be enough for all archs
* (e.g., 64K page size guest will need even less memory for
* page tables).
*/
vm = create_vm(mode, VCPU_ID,
2ul << (DIRTY_MEM_BITS - PAGE_SHIFT_4K),
guest_code);
guest_page_size = vm_get_page_size(vm);
/*
* A little more than 1G of guest page sized pages. Cover the
* case where the size is not aligned to 64 pages.
*/
guest_num_pages = (1ul << (DIRTY_MEM_BITS -
vm_get_page_shift(vm))) + 3;
guest_num_pages = vm_adjust_num_guest_pages(mode, guest_num_pages);
#ifdef __s390x__
/* Round up to multiple of 1M (segment size) */
guest_num_pages = (guest_num_pages + 0xff) & ~0xffUL;
#endif
host_page_size = getpagesize();
host_num_pages = vm_num_host_pages(mode, guest_num_pages);
if (!phys_offset) {
guest_test_phys_mem = (vm_get_max_gfn(vm) -
guest_num_pages) * guest_page_size;
guest_test_phys_mem &= ~(host_page_size - 1);
} else {
guest_test_phys_mem = phys_offset;
}
#ifdef __s390x__
/* Align to 1M (segment size) */
guest_test_phys_mem &= ~((1 << 20) - 1);
#endif
DEBUG("guest physical test memory offset: 0x%lx\n", guest_test_phys_mem);
bmap = bitmap_alloc(host_num_pages);
host_bmap_track = bitmap_alloc(host_num_pages);
#ifdef USE_CLEAR_DIRTY_LOG
struct kvm_enable_cap cap = {};
cap.cap = KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2;
cap.args[0] = 1;
vm_enable_cap(vm, &cap);
#endif
/* Add an extra memory slot for testing dirty logging */
vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS,
guest_test_phys_mem,
TEST_MEM_SLOT_INDEX,
guest_num_pages,
KVM_MEM_LOG_DIRTY_PAGES);
/* Do mapping for the dirty track memory slot */
virt_map(vm, guest_test_virt_mem, guest_test_phys_mem,
guest_num_pages * guest_page_size, 0);
/* Cache the HVA pointer of the region */
host_test_mem = addr_gpa2hva(vm, (vm_paddr_t)guest_test_phys_mem);
#ifdef __x86_64__
vcpu_set_cpuid(vm, VCPU_ID, kvm_get_supported_cpuid());
#endif
ucall_init(vm, NULL);
/* Export the shared variables to the guest */
sync_global_to_guest(vm, host_page_size);
sync_global_to_guest(vm, guest_page_size);
sync_global_to_guest(vm, guest_test_virt_mem);
sync_global_to_guest(vm, guest_num_pages);
/* Start the iterations */
iteration = 1;
sync_global_to_guest(vm, iteration);
host_quit = false;
host_dirty_count = 0;
host_clear_count = 0;
host_track_next_count = 0;
pthread_create(&vcpu_thread, NULL, vcpu_worker, vm);
while (iteration < iterations) {
/* Give the vcpu thread some time to dirty some pages */
usleep(interval * 1000);
kvm_vm_get_dirty_log(vm, TEST_MEM_SLOT_INDEX, bmap);
#ifdef USE_CLEAR_DIRTY_LOG
kvm_vm_clear_dirty_log(vm, TEST_MEM_SLOT_INDEX, bmap, 0,
host_num_pages);
#endif
vm_dirty_log_verify(mode, bmap);
iteration++;
sync_global_to_guest(vm, iteration);
}
/* Tell the vcpu thread to quit */
host_quit = true;
pthread_join(vcpu_thread, NULL);
DEBUG("Total bits checked: dirty (%"PRIu64"), clear (%"PRIu64"), "
"track_next (%"PRIu64")\n", host_dirty_count, host_clear_count,
host_track_next_count);
free(bmap);
free(host_bmap_track);
ucall_uninit(vm);
kvm_vm_free(vm);
}
struct guest_mode {
bool supported;
bool enabled;
};
static struct guest_mode guest_modes[NUM_VM_MODES];
#define guest_mode_init(mode, supported, enabled) ({ \
guest_modes[mode] = (struct guest_mode){ supported, enabled }; \
})
static void help(char *name)
{
int i;
puts("");
printf("usage: %s [-h] [-i iterations] [-I interval] "
"[-p offset] [-m mode]\n", name);
puts("");
printf(" -i: specify iteration counts (default: %"PRIu64")\n",
TEST_HOST_LOOP_N);
printf(" -I: specify interval in ms (default: %"PRIu64" ms)\n",
TEST_HOST_LOOP_INTERVAL);
printf(" -p: specify guest physical test memory offset\n"
" Warning: a low offset can conflict with the loaded test code.\n");
printf(" -m: specify the guest mode ID to test "
"(default: test all supported modes)\n"
" This option may be used multiple times.\n"
" Guest mode IDs:\n");
for (i = 0; i < NUM_VM_MODES; ++i) {
printf(" %d: %s%s\n", i, vm_guest_mode_string(i),
guest_modes[i].supported ? " (supported)" : "");
}
puts("");
exit(0);
}
int main(int argc, char *argv[])
{
unsigned long iterations = TEST_HOST_LOOP_N;
unsigned long interval = TEST_HOST_LOOP_INTERVAL;
bool mode_selected = false;
uint64_t phys_offset = 0;
unsigned int mode;
int opt, i;
#ifdef USE_CLEAR_DIRTY_LOG
if (!kvm_check_cap(KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2)) {
fprintf(stderr, "KVM_CLEAR_DIRTY_LOG not available, skipping tests\n");
exit(KSFT_SKIP);
}
#endif
#ifdef __x86_64__
guest_mode_init(VM_MODE_PXXV48_4K, true, true);
#endif
#ifdef __aarch64__
guest_mode_init(VM_MODE_P40V48_4K, true, true);
guest_mode_init(VM_MODE_P40V48_64K, true, true);
{
unsigned int limit = kvm_check_cap(KVM_CAP_ARM_VM_IPA_SIZE);
if (limit >= 52)
guest_mode_init(VM_MODE_P52V48_64K, true, true);
if (limit >= 48) {
guest_mode_init(VM_MODE_P48V48_4K, true, true);
guest_mode_init(VM_MODE_P48V48_64K, true, true);
}
}
#endif
#ifdef __s390x__
guest_mode_init(VM_MODE_P40V48_4K, true, true);
#endif
while ((opt = getopt(argc, argv, "hi:I:p:m:")) != -1) {
switch (opt) {
case 'i':
iterations = strtol(optarg, NULL, 10);
break;
case 'I':
interval = strtol(optarg, NULL, 10);
break;
case 'p':
phys_offset = strtoull(optarg, NULL, 0);
break;
case 'm':
if (!mode_selected) {
for (i = 0; i < NUM_VM_MODES; ++i)
guest_modes[i].enabled = false;
mode_selected = true;
}
mode = strtoul(optarg, NULL, 10);
TEST_ASSERT(mode < NUM_VM_MODES,
"Guest mode ID %d too big", mode);
guest_modes[mode].enabled = true;
break;
case 'h':
default:
help(argv[0]);
break;
}
}
TEST_ASSERT(iterations > 2, "Iterations must be greater than two");
TEST_ASSERT(interval > 0, "Interval must be greater than zero");
DEBUG("Test iterations: %"PRIu64", interval: %"PRIu64" (ms)\n",
iterations, interval);
srandom(time(0));
for (i = 0; i < NUM_VM_MODES; ++i) {
if (!guest_modes[i].enabled)
continue;
TEST_ASSERT(guest_modes[i].supported,
"Guest mode ID %d (%s) not supported.",
i, vm_guest_mode_string(i));
run_test(i, iterations, interval, phys_offset);
}
return 0;
}