mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-25 20:14:25 +08:00
b002c6fdab
There are various places inside this dtsi file where 8 spaces where used for indenting instead of tabs. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
562 lines
15 KiB
Plaintext
562 lines
15 KiB
Plaintext
/*
|
|
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "skeleton.dtsi"
|
|
#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
model = "Qualcomm Technologies, Inc. IPQ4019";
|
|
compatible = "qcom,ipq4019";
|
|
interrupt-parent = <&intc>;
|
|
|
|
reserved-memory {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
ranges;
|
|
|
|
smem_region: smem@87e00000 {
|
|
reg = <0x87e00000 0x080000>;
|
|
no-map;
|
|
};
|
|
|
|
tz@87e80000 {
|
|
reg = <0x87e80000 0x180000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
spi0 = &blsp1_spi1;
|
|
spi1 = &blsp1_spi2;
|
|
i2c0 = &blsp1_i2c3;
|
|
i2c1 = &blsp1_i2c4;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc0>;
|
|
qcom,saw = <&saw0>;
|
|
reg = <0x0>;
|
|
clocks = <&gcc GCC_APPS_CLK_SRC>;
|
|
clock-frequency = <0>;
|
|
clock-latency = <256000>;
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc1>;
|
|
qcom,saw = <&saw1>;
|
|
reg = <0x1>;
|
|
clocks = <&gcc GCC_APPS_CLK_SRC>;
|
|
clock-frequency = <0>;
|
|
clock-latency = <256000>;
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
};
|
|
|
|
cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc2>;
|
|
qcom,saw = <&saw2>;
|
|
reg = <0x2>;
|
|
clocks = <&gcc GCC_APPS_CLK_SRC>;
|
|
clock-frequency = <0>;
|
|
clock-latency = <256000>;
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
};
|
|
|
|
cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc3>;
|
|
qcom,saw = <&saw3>;
|
|
reg = <0x3>;
|
|
clocks = <&gcc GCC_APPS_CLK_SRC>;
|
|
clock-frequency = <0>;
|
|
clock-latency = <256000>;
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
};
|
|
};
|
|
|
|
cpu0_opp_table: opp_table0 {
|
|
compatible = "operating-points-v2";
|
|
opp-shared;
|
|
|
|
opp-48000000 {
|
|
opp-hz = /bits/ 64 <48000000>;
|
|
clock-latency-ns = <256000>;
|
|
};
|
|
opp-200000000 {
|
|
opp-hz = /bits/ 64 <200000000>;
|
|
clock-latency-ns = <256000>;
|
|
};
|
|
opp-500000000 {
|
|
opp-hz = /bits/ 64 <500000000>;
|
|
clock-latency-ns = <256000>;
|
|
};
|
|
opp-716000000 {
|
|
opp-hz = /bits/ 64 <716000000>;
|
|
clock-latency-ns = <256000>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
|
|
IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
clocks {
|
|
sleep_clk: sleep_clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
xo: xo {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <48000000>;
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
firmware {
|
|
scm {
|
|
compatible = "qcom,scm-ipq4019";
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <1 2 0xf08>,
|
|
<1 3 0xf08>,
|
|
<1 4 0xf08>,
|
|
<1 1 0xf08>;
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
intc: interrupt-controller@b000000 {
|
|
compatible = "qcom,msm-qgic2";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x0b000000 0x1000>,
|
|
<0x0b002000 0x1000>;
|
|
};
|
|
|
|
gcc: clock-controller@1800000 {
|
|
compatible = "qcom,gcc-ipq4019";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
reg = <0x1800000 0x60000>;
|
|
};
|
|
|
|
rng@22000 {
|
|
compatible = "qcom,prng";
|
|
reg = <0x22000 0x140>;
|
|
clocks = <&gcc GCC_PRNG_AHB_CLK>;
|
|
clock-names = "core";
|
|
status = "disabled";
|
|
};
|
|
|
|
tlmm: pinctrl@1000000 {
|
|
compatible = "qcom,ipq4019-pinctrl";
|
|
reg = <0x01000000 0x300000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
blsp_dma: dma@7884000 {
|
|
compatible = "qcom,bam-v1.7.0";
|
|
reg = <0x07884000 0x23000>;
|
|
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */
|
|
compatible = "qcom,spi-qup-v2.2.1";
|
|
reg = <0x78b5000 0x600>;
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dmas = <&blsp_dma 5>, <&blsp_dma 4>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
|
|
compatible = "qcom,spi-qup-v2.2.1";
|
|
reg = <0x78b6000 0x600>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dmas = <&blsp_dma 7>, <&blsp_dma 6>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x78b7000 0x600>;
|
|
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
|
|
<&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
|
|
clock-names = "iface", "core";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dmas = <&blsp_dma 9>, <&blsp_dma 8>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x78b8000 0x600>;
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
|
|
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
|
|
clock-names = "iface", "core";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dmas = <&blsp_dma 11>, <&blsp_dma 10>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
cryptobam: dma@8e04000 {
|
|
compatible = "qcom,bam-v1.7.0";
|
|
reg = <0x08e04000 0x20000>;
|
|
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <1>;
|
|
qcom,controlled-remotely;
|
|
status = "disabled";
|
|
};
|
|
|
|
crypto@8e3a000 {
|
|
compatible = "qcom,crypto-v5.1";
|
|
reg = <0x08e3a000 0x6000>;
|
|
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
|
|
<&gcc GCC_CRYPTO_AXI_CLK>,
|
|
<&gcc GCC_CRYPTO_CLK>;
|
|
clock-names = "iface", "bus", "core";
|
|
dmas = <&cryptobam 2>, <&cryptobam 3>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
acc0: clock-controller@b088000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
|
|
};
|
|
|
|
acc1: clock-controller@b098000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
|
|
};
|
|
|
|
acc2: clock-controller@b0a8000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
|
|
};
|
|
|
|
acc3: clock-controller@b0b8000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
|
|
};
|
|
|
|
saw0: regulator@b089000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw1: regulator@b099000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw2: regulator@b0a9000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw3: regulator@b0b9000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
blsp1_uart1: serial@78af000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0x78af000 0x200>;
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
dmas = <&blsp_dma 1>, <&blsp_dma 0>;
|
|
dma-names = "rx", "tx";
|
|
};
|
|
|
|
blsp1_uart2: serial@78b0000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0x78b0000 0x200>;
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
dmas = <&blsp_dma 3>, <&blsp_dma 2>;
|
|
dma-names = "rx", "tx";
|
|
};
|
|
|
|
watchdog@b017000 {
|
|
compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
|
|
reg = <0xb017000 0x40>;
|
|
clocks = <&sleep_clk>;
|
|
timeout-sec = <10>;
|
|
status = "disabled";
|
|
};
|
|
|
|
restart@4ab000 {
|
|
compatible = "qcom,pshold";
|
|
reg = <0x4ab000 0x4>;
|
|
};
|
|
|
|
pcie0: pci@40000000 {
|
|
compatible = "qcom,pcie-ipq4019", "snps,dw-pcie";
|
|
reg = <0x40000000 0xf1d
|
|
0x40000f20 0xa8
|
|
0x80000 0x2000
|
|
0x40100000 0x1000>;
|
|
reg-names = "dbi", "elbi", "parf", "config";
|
|
device_type = "pci";
|
|
linux,pci-domain = <0>;
|
|
bus-range = <0x00 0xff>;
|
|
num-lanes = <1>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
|
|
0x82000000 0 0x40300000 0x40300000 0 0x400000>;
|
|
|
|
interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
clocks = <&gcc GCC_PCIE_AHB_CLK>,
|
|
<&gcc GCC_PCIE_AXI_M_CLK>,
|
|
<&gcc GCC_PCIE_AXI_S_CLK>;
|
|
clock-names = "aux",
|
|
"master_bus",
|
|
"slave_bus";
|
|
|
|
resets = <&gcc PCIE_AXI_M_ARES>,
|
|
<&gcc PCIE_AXI_S_ARES>,
|
|
<&gcc PCIE_PIPE_ARES>,
|
|
<&gcc PCIE_AXI_M_VMIDMT_ARES>,
|
|
<&gcc PCIE_AXI_S_XPU_ARES>,
|
|
<&gcc PCIE_PARF_XPU_ARES>,
|
|
<&gcc PCIE_PHY_ARES>,
|
|
<&gcc PCIE_AXI_M_STICKY_ARES>,
|
|
<&gcc PCIE_PIPE_STICKY_ARES>,
|
|
<&gcc PCIE_PWR_ARES>,
|
|
<&gcc PCIE_AHB_ARES>,
|
|
<&gcc PCIE_PHY_AHB_ARES>;
|
|
reset-names = "axi_m",
|
|
"axi_s",
|
|
"pipe",
|
|
"axi_m_vmid",
|
|
"axi_s_xpu",
|
|
"parf",
|
|
"phy",
|
|
"axi_m_sticky",
|
|
"pipe_sticky",
|
|
"pwr",
|
|
"ahb",
|
|
"phy_ahb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
qpic_bam: dma@7984000 {
|
|
compatible = "qcom,bam-v1.7.0";
|
|
reg = <0x7984000 0x1a000>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_QPIC_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
nand: qpic-nand@79b0000 {
|
|
compatible = "qcom,ipq4019-nand";
|
|
reg = <0x79b0000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&gcc GCC_QPIC_CLK>,
|
|
<&gcc GCC_QPIC_AHB_CLK>;
|
|
clock-names = "core", "aon";
|
|
|
|
dmas = <&qpic_bam 0>,
|
|
<&qpic_bam 1>,
|
|
<&qpic_bam 2>;
|
|
dma-names = "tx", "rx", "cmd";
|
|
status = "disabled";
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
nand-bus-width = <8>;
|
|
};
|
|
};
|
|
|
|
wifi0: wifi@a000000 {
|
|
compatible = "qcom,ipq4019-wifi";
|
|
reg = <0xa000000 0x200000>;
|
|
resets = <&gcc WIFI0_CPU_INIT_RESET>,
|
|
<&gcc WIFI0_RADIO_SRIF_RESET>,
|
|
<&gcc WIFI0_RADIO_WARM_RESET>,
|
|
<&gcc WIFI0_RADIO_COLD_RESET>,
|
|
<&gcc WIFI0_CORE_WARM_RESET>,
|
|
<&gcc WIFI0_CORE_COLD_RESET>;
|
|
reset-names = "wifi_cpu_init", "wifi_radio_srif",
|
|
"wifi_radio_warm", "wifi_radio_cold",
|
|
"wifi_core_warm", "wifi_core_cold";
|
|
clocks = <&gcc GCC_WCSS2G_CLK>,
|
|
<&gcc GCC_WCSS2G_REF_CLK>,
|
|
<&gcc GCC_WCSS2G_RTC_CLK>;
|
|
clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
|
|
"wifi_wcss_rtc";
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "msi0", "msi1", "msi2", "msi3",
|
|
"msi4", "msi5", "msi6", "msi7",
|
|
"msi8", "msi9", "msi10", "msi11",
|
|
"msi12", "msi13", "msi14", "msi15",
|
|
"legacy";
|
|
status = "disabled";
|
|
};
|
|
|
|
wifi1: wifi@a800000 {
|
|
compatible = "qcom,ipq4019-wifi";
|
|
reg = <0xa800000 0x200000>;
|
|
resets = <&gcc WIFI1_CPU_INIT_RESET>,
|
|
<&gcc WIFI1_RADIO_SRIF_RESET>,
|
|
<&gcc WIFI1_RADIO_WARM_RESET>,
|
|
<&gcc WIFI1_RADIO_COLD_RESET>,
|
|
<&gcc WIFI1_CORE_WARM_RESET>,
|
|
<&gcc WIFI1_CORE_COLD_RESET>;
|
|
reset-names = "wifi_cpu_init", "wifi_radio_srif",
|
|
"wifi_radio_warm", "wifi_radio_cold",
|
|
"wifi_core_warm", "wifi_core_cold";
|
|
clocks = <&gcc GCC_WCSS5G_CLK>,
|
|
<&gcc GCC_WCSS5G_REF_CLK>,
|
|
<&gcc GCC_WCSS5G_RTC_CLK>;
|
|
clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
|
|
"wifi_wcss_rtc";
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 49 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 50 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 56 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 58 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 59 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 60 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "msi0", "msi1", "msi2", "msi3",
|
|
"msi4", "msi5", "msi6", "msi7",
|
|
"msi8", "msi9", "msi10", "msi11",
|
|
"msi12", "msi13", "msi14", "msi15",
|
|
"legacy";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|