mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-25 20:14:25 +08:00
2bb7babaae
Looks like I accidentally left some extra flags for uart3 to
not idle it. This happened as I generated the data from a
running system where these flags are set dynamically on boot
by omap_hwmod_setup_earlycon_flags() if earlycon is enabled.
We can just remove them.
Fixes: 4c38798461 ("ARM: dts: omap5: Add l4 interconnect hierarchy and ti-sysc data")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2461 lines
71 KiB
Plaintext
2461 lines
71 KiB
Plaintext
&l4_cfg { /* 0x4a000000 */
|
|
compatible = "ti,omap5-l4-cfg", "simple-bus";
|
|
reg = <0x4a000000 0x800>,
|
|
<0x4a000800 0x800>,
|
|
<0x4a001000 0x1000>;
|
|
reg-names = "ap", "la", "ia0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */
|
|
<0x00080000 0x4a080000 0x080000>, /* segment 1 */
|
|
<0x00100000 0x4a100000 0x080000>, /* segment 2 */
|
|
<0x00180000 0x4a180000 0x080000>, /* segment 3 */
|
|
<0x00200000 0x4a200000 0x080000>, /* segment 4 */
|
|
<0x00280000 0x4a280000 0x080000>, /* segment 5 */
|
|
<0x00300000 0x4a300000 0x080000>; /* segment 6 */
|
|
|
|
segment@0 { /* 0x4a000000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
|
|
<0x00001000 0x00001000 0x001000>, /* ap 1 */
|
|
<0x00000800 0x00000800 0x000800>, /* ap 2 */
|
|
<0x00002000 0x00002000 0x001000>, /* ap 3 */
|
|
<0x00003000 0x00003000 0x001000>, /* ap 4 */
|
|
<0x00004000 0x00004000 0x001000>, /* ap 5 */
|
|
<0x00005000 0x00005000 0x001000>, /* ap 6 */
|
|
<0x00056000 0x00056000 0x001000>, /* ap 7 */
|
|
<0x00057000 0x00057000 0x001000>, /* ap 8 */
|
|
<0x0005c000 0x0005c000 0x001000>, /* ap 9 */
|
|
<0x00058000 0x00058000 0x001000>, /* ap 10 */
|
|
<0x00062000 0x00062000 0x001000>, /* ap 11 */
|
|
<0x00063000 0x00063000 0x001000>, /* ap 12 */
|
|
<0x00008000 0x00008000 0x002000>, /* ap 21 */
|
|
<0x0000a000 0x0000a000 0x001000>, /* ap 22 */
|
|
<0x00066000 0x00066000 0x001000>, /* ap 23 */
|
|
<0x00067000 0x00067000 0x001000>, /* ap 24 */
|
|
<0x0005e000 0x0005e000 0x002000>, /* ap 69 */
|
|
<0x00060000 0x00060000 0x001000>, /* ap 70 */
|
|
<0x00064000 0x00064000 0x001000>, /* ap 71 */
|
|
<0x00065000 0x00065000 0x001000>, /* ap 72 */
|
|
<0x0005a000 0x0005a000 0x001000>, /* ap 77 */
|
|
<0x0005b000 0x0005b000 0x001000>, /* ap 78 */
|
|
<0x00070000 0x00070000 0x004000>, /* ap 79 */
|
|
<0x00074000 0x00074000 0x001000>, /* ap 80 */
|
|
<0x00075000 0x00075000 0x001000>, /* ap 81 */
|
|
<0x00076000 0x00076000 0x001000>, /* ap 82 */
|
|
<0x00020000 0x00020000 0x020000>, /* ap 109 */
|
|
<0x00040000 0x00040000 0x001000>, /* ap 110 */
|
|
<0x00059000 0x00059000 0x001000>; /* ap 111 */
|
|
|
|
target-module@2000 { /* 0x4a002000, ap 3 44.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0x2000 0x4>;
|
|
reg-names = "rev";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x2000 0x1000>;
|
|
|
|
scm_core: scm@0 {
|
|
compatible = "ti,omap5-scm-core", "simple-bus";
|
|
reg = <0x0 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x800>;
|
|
|
|
scm_conf: scm_conf@0 {
|
|
compatible = "syscon";
|
|
reg = <0x0 0x800>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
scm_padconf_core: scm@800 {
|
|
compatible = "ti,omap5-scm-padconf-core",
|
|
"simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x800 0x800>;
|
|
|
|
omap5_pmx_core: pinmux@40 {
|
|
compatible = "ti,omap5-padconf",
|
|
"pinctrl-single";
|
|
reg = <0x40 0x01b6>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#pinctrl-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
pinctrl-single,register-width = <16>;
|
|
pinctrl-single,function-mask = <0x7fff>;
|
|
};
|
|
|
|
omap5_padconf_global: omap5_padconf_global@5a0 {
|
|
compatible = "syscon",
|
|
"simple-bus";
|
|
reg = <0x5a0 0xec>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x5a0 0xec>;
|
|
|
|
pbias_regulator: pbias_regulator@60 {
|
|
compatible = "ti,pbias-omap5", "ti,pbias-omap";
|
|
reg = <0x60 0x4>;
|
|
syscon = <&omap5_padconf_global>;
|
|
pbias_mmc_reg: pbias_mmc_omap5 {
|
|
regulator-name = "pbias_mmc_omap5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@4000 { /* 0x4a004000, ap 5 5c.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0x4000 0x4>;
|
|
reg-names = "rev";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x4000 0x1000>;
|
|
|
|
cm_core_aon: cm_core_aon@0 {
|
|
compatible = "ti,omap5-cm-core-aon",
|
|
"simple-bus";
|
|
reg = <0x0 0x2000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x1000>;
|
|
|
|
cm_core_aon_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
cm_core_aon_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@8000 { /* 0x4a008000, ap 21 4c.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0x8000 0x4>;
|
|
reg-names = "rev";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x8000 0x2000>;
|
|
|
|
cm_core: cm_core@0 {
|
|
compatible = "ti,omap5-cm-core", "simple-bus";
|
|
reg = <0x0 0x2000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x2000>;
|
|
|
|
cm_core_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
cm_core_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@20000 { /* 0x4a020000, ap 109 08.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "usb_otg_ss";
|
|
reg = <0x20000 0x4>,
|
|
<0x20010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
|
|
clocks = <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x20000 0x20000>;
|
|
|
|
usb3: omap_dwc3@0 {
|
|
compatible = "ti,dwc3";
|
|
reg = <0x0 0x10000>;
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
utmi-mode = <2>;
|
|
ranges = <0 0 0x20000>;
|
|
dwc3: dwc3@10000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x10000 0x10000>;
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "peripheral",
|
|
"host",
|
|
"otg";
|
|
phys = <&usb2_phy>, <&usb3_phy>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
dr_mode = "peripheral";
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@56000 { /* 0x4a056000, ap 7 02.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "dma_system";
|
|
reg = <0x56000 0x4>,
|
|
<0x5602c 0x4>,
|
|
<0x56028 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_EMUFREE |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, dma_clkdm */
|
|
clocks = <&dma_clkctrl OMAP5_DMA_SYSTEM_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x56000 0x1000>;
|
|
|
|
sdma: dma-controller@0 {
|
|
compatible = "ti,omap4430-sdma";
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
dma-channels = <32>;
|
|
dma-requests = <127>;
|
|
};
|
|
};
|
|
|
|
target-module@58000 { /* 0x4a058000, ap 10 06.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00058000 0x00001000>,
|
|
<0x00001000 0x00059000 0x00001000>,
|
|
<0x00002000 0x0005a000 0x00001000>,
|
|
<0x00003000 0x0005b000 0x00001000>;
|
|
};
|
|
|
|
target-module@5e000 { /* 0x4a05e000, ap 69 2a.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x5e000 0x2000>;
|
|
};
|
|
|
|
target-module@62000 { /* 0x4a062000, ap 11 0e.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "usb_tll_hs";
|
|
reg = <0x62000 0x4>,
|
|
<0x62010 0x4>,
|
|
<0x62014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
|
|
clocks = <&l3init_clkctrl OMAP5_USB_TLL_HS_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x62000 0x1000>;
|
|
|
|
usbhstll: usbhstll@0 {
|
|
compatible = "ti,usbhs-tll";
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
target-module@64000 { /* 0x4a064000, ap 71 1e.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "usb_host_hs";
|
|
reg = <0x64000 0x4>,
|
|
<0x64010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
|
|
clocks = <&l3init_clkctrl OMAP5_USB_HOST_HS_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x64000 0x1000>;
|
|
|
|
usbhshost: usbhshost@0 {
|
|
compatible = "ti,usbhs-host";
|
|
reg = <0x0 0x800>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x1000>;
|
|
clocks = <&l3init_60m_fclk>,
|
|
<&xclk60mhsp1_ck>,
|
|
<&xclk60mhsp2_ck>;
|
|
clock-names = "refclk_60m_int",
|
|
"refclk_60m_ext_p1",
|
|
"refclk_60m_ext_p2";
|
|
|
|
usbhsohci: ohci@800 {
|
|
compatible = "ti,ohci-omap3";
|
|
reg = <0x800 0x400>;
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
remote-wakeup-connected;
|
|
};
|
|
|
|
usbhsehci: ehci@c00 {
|
|
compatible = "ti,ehci-omap";
|
|
reg = <0xc00 0x400>;
|
|
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@66000 { /* 0x4a066000, ap 23 0a.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "mmu_dsp";
|
|
reg = <0x66000 0x4>,
|
|
<0x66010 0x4>,
|
|
<0x66014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
|
|
clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x66000 0x1000>;
|
|
|
|
/* mmu_dsp cannot be moved before reset driver */
|
|
status = "disabled";
|
|
};
|
|
|
|
target-module@70000 { /* 0x4a070000, ap 79 2e.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x70000 0x4000>;
|
|
};
|
|
|
|
target-module@75000 { /* 0x4a075000, ap 81 32.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x75000 0x1000>;
|
|
};
|
|
};
|
|
|
|
segment@80000 { /* 0x4a080000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */
|
|
<0x0005a000 0x000da000 0x001000>, /* ap 14 */
|
|
<0x0005b000 0x000db000 0x001000>, /* ap 15 */
|
|
<0x0005c000 0x000dc000 0x001000>, /* ap 16 */
|
|
<0x0005d000 0x000dd000 0x001000>, /* ap 17 */
|
|
<0x0005e000 0x000de000 0x001000>, /* ap 18 */
|
|
<0x00060000 0x000e0000 0x001000>, /* ap 19 */
|
|
<0x00061000 0x000e1000 0x001000>, /* ap 20 */
|
|
<0x00074000 0x000f4000 0x001000>, /* ap 25 */
|
|
<0x00075000 0x000f5000 0x001000>, /* ap 26 */
|
|
<0x00076000 0x000f6000 0x001000>, /* ap 27 */
|
|
<0x00077000 0x000f7000 0x001000>, /* ap 28 */
|
|
<0x00036000 0x000b6000 0x001000>, /* ap 65 */
|
|
<0x00037000 0x000b7000 0x001000>, /* ap 66 */
|
|
<0x0004d000 0x000cd000 0x001000>, /* ap 67 */
|
|
<0x0004e000 0x000ce000 0x001000>, /* ap 68 */
|
|
<0x00000000 0x00080000 0x004000>, /* ap 83 */
|
|
<0x00004000 0x00084000 0x001000>, /* ap 84 */
|
|
<0x00005000 0x00085000 0x001000>, /* ap 85 */
|
|
<0x00006000 0x00086000 0x001000>, /* ap 86 */
|
|
<0x00007000 0x00087000 0x001000>, /* ap 87 */
|
|
<0x00008000 0x00088000 0x001000>, /* ap 88 */
|
|
<0x00010000 0x00090000 0x004000>, /* ap 89 */
|
|
<0x00014000 0x00094000 0x001000>, /* ap 90 */
|
|
<0x00015000 0x00095000 0x001000>, /* ap 91 */
|
|
<0x00016000 0x00096000 0x001000>, /* ap 92 */
|
|
<0x00017000 0x00097000 0x001000>, /* ap 93 */
|
|
<0x00018000 0x00098000 0x001000>, /* ap 94 */
|
|
<0x00020000 0x000a0000 0x004000>, /* ap 95 */
|
|
<0x00024000 0x000a4000 0x001000>, /* ap 96 */
|
|
<0x00025000 0x000a5000 0x001000>, /* ap 97 */
|
|
<0x00026000 0x000a6000 0x001000>, /* ap 98 */
|
|
<0x00027000 0x000a7000 0x001000>, /* ap 99 */
|
|
<0x00028000 0x000a8000 0x001000>; /* ap 100 */
|
|
|
|
target-module@0 { /* 0x4a080000, ap 83 28.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "ocp2scp1";
|
|
reg = <0x0 0x4>,
|
|
<0x10 0x4>,
|
|
<0x14 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
|
|
clocks = <&l3init_clkctrl OMAP5_OCP2SCP1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00000000 0x00004000>,
|
|
<0x00004000 0x00004000 0x00001000>,
|
|
<0x00005000 0x00005000 0x00001000>,
|
|
<0x00006000 0x00006000 0x00001000>,
|
|
<0x00007000 0x00007000 0x00001000>;
|
|
|
|
ocp2scp@0 {
|
|
compatible = "ti,omap-ocp2scp";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0 0x20>;
|
|
};
|
|
|
|
usb2_phy: usb2phy@4000 {
|
|
compatible = "ti,omap-usb2";
|
|
reg = <0x4000 0x7c>;
|
|
syscon-phy-power = <&scm_conf 0x300>;
|
|
clocks = <&usb_phy_cm_clk32k>,
|
|
<&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
|
|
clock-names = "wkupclk", "refclk";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usb3_phy: usb3phy@4400 {
|
|
compatible = "ti,omap-usb3";
|
|
reg = <0x4400 0x80>,
|
|
<0x4800 0x64>,
|
|
<0x4c00 0x40>;
|
|
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
|
|
syscon-phy-power = <&scm_conf 0x370>;
|
|
clocks = <&usb_phy_cm_clk32k>,
|
|
<&sys_clkin>,
|
|
<&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
|
|
clock-names = "wkupclk",
|
|
"sysclk",
|
|
"refclk";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
|
|
target-module@10000 { /* 0x4a090000, ap 89 36.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "ocp2scp3";
|
|
reg = <0x10000 0x4>,
|
|
<0x10010 0x4>,
|
|
<0x10014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
|
|
clocks = <&l3init_clkctrl OMAP5_OCP2SCP3_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00010000 0x00004000>,
|
|
<0x00004000 0x00014000 0x00001000>,
|
|
<0x00005000 0x00015000 0x00001000>,
|
|
<0x00006000 0x00016000 0x00001000>,
|
|
<0x00007000 0x00017000 0x00001000>;
|
|
|
|
ocp2scp@0 {
|
|
compatible = "ti,omap-ocp2scp";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x0 0x20>;
|
|
};
|
|
|
|
sata_phy: phy@6000 {
|
|
compatible = "ti,phy-pipe3-sata";
|
|
reg = <0x6000 0x80>, /* phy_rx */
|
|
<0x6400 0x64>, /* phy_tx */
|
|
<0x6800 0x40>; /* pll_ctrl */
|
|
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
|
|
syscon-phy-power = <&scm_conf 0x374>;
|
|
clocks = <&sys_clkin>,
|
|
<&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
|
|
clock-names = "sysclk", "refclk";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
|
|
target-module@20000 { /* 0x4a0a0000, ap 95 50.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00020000 0x00004000>,
|
|
<0x00004000 0x00024000 0x00001000>,
|
|
<0x00005000 0x00025000 0x00001000>,
|
|
<0x00006000 0x00026000 0x00001000>,
|
|
<0x00007000 0x00027000 0x00001000>;
|
|
};
|
|
|
|
target-module@36000 { /* 0x4a0b6000, ap 65 6c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x36000 0x1000>;
|
|
};
|
|
|
|
target-module@4d000 { /* 0x4a0cd000, ap 67 64.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x4d000 0x1000>;
|
|
};
|
|
|
|
target-module@59000 { /* 0x4a0d9000, ap 13 20.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x59000 0x1000>;
|
|
};
|
|
|
|
target-module@5b000 { /* 0x4a0db000, ap 15 10.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x5b000 0x1000>;
|
|
};
|
|
|
|
target-module@5d000 { /* 0x4a0dd000, ap 17 18.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x5d000 0x1000>;
|
|
};
|
|
|
|
target-module@60000 { /* 0x4a0e0000, ap 19 54.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x60000 0x1000>;
|
|
};
|
|
|
|
target-module@74000 { /* 0x4a0f4000, ap 25 04.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "mailbox";
|
|
reg = <0x74000 0x4>,
|
|
<0x74010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
|
|
clocks = <&l4cfg_clkctrl OMAP5_MAILBOX_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x74000 0x1000>;
|
|
|
|
mailbox: mailbox@0 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <3>;
|
|
ti,mbox-num-fifos = <8>;
|
|
mbox_ipu: mbox_ipu {
|
|
ti,mbox-tx = <0 0 0>;
|
|
ti,mbox-rx = <1 0 0>;
|
|
};
|
|
mbox_dsp: mbox_dsp {
|
|
ti,mbox-tx = <3 0 0>;
|
|
ti,mbox-rx = <2 0 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@76000 { /* 0x4a0f6000, ap 27 0c.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "spinlock";
|
|
reg = <0x76000 0x4>,
|
|
<0x76010 0x4>,
|
|
<0x76014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
|
|
clocks = <&l4cfg_clkctrl OMAP5_SPINLOCK_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x76000 0x1000>;
|
|
|
|
hwspinlock: spinlock@0 {
|
|
compatible = "ti,omap4-hwspinlock";
|
|
reg = <0x0 0x1000>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
segment@100000 { /* 0x4a100000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00002000 0x00102000 0x001000>, /* ap 59 */
|
|
<0x00003000 0x00103000 0x001000>, /* ap 60 */
|
|
<0x00008000 0x00108000 0x001000>, /* ap 61 */
|
|
<0x00009000 0x00109000 0x001000>, /* ap 62 */
|
|
<0x0000a000 0x0010a000 0x001000>, /* ap 63 */
|
|
<0x0000b000 0x0010b000 0x001000>, /* ap 64 */
|
|
<0x00040000 0x00140000 0x010000>, /* ap 101 */
|
|
<0x00050000 0x00150000 0x001000>; /* ap 102 */
|
|
|
|
target-module@2000 { /* 0x4a102000, ap 59 2c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x2000 0x1000>;
|
|
};
|
|
|
|
target-module@8000 { /* 0x4a108000, ap 61 26.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x8000 0x1000>;
|
|
};
|
|
|
|
target-module@a000 { /* 0x4a10a000, ap 63 22.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xa000 0x1000>;
|
|
};
|
|
|
|
target-module@40000 { /* 0x4a140000, ap 101 16.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x40000 0x10000>;
|
|
};
|
|
};
|
|
|
|
segment@180000 { /* 0x4a180000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
|
|
segment@200000 { /* 0x4a200000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 29 */
|
|
<0x0001f000 0x0021f000 0x001000>, /* ap 30 */
|
|
<0x0000a000 0x0020a000 0x001000>, /* ap 31 */
|
|
<0x0000b000 0x0020b000 0x001000>, /* ap 32 */
|
|
<0x00006000 0x00206000 0x001000>, /* ap 33 */
|
|
<0x00007000 0x00207000 0x001000>, /* ap 34 */
|
|
<0x00004000 0x00204000 0x001000>, /* ap 35 */
|
|
<0x00005000 0x00205000 0x001000>, /* ap 36 */
|
|
<0x00012000 0x00212000 0x001000>, /* ap 37 */
|
|
<0x00013000 0x00213000 0x001000>, /* ap 38 */
|
|
<0x0000c000 0x0020c000 0x001000>, /* ap 39 */
|
|
<0x0000d000 0x0020d000 0x001000>, /* ap 40 */
|
|
<0x00010000 0x00210000 0x001000>, /* ap 41 */
|
|
<0x00011000 0x00211000 0x001000>, /* ap 42 */
|
|
<0x00016000 0x00216000 0x001000>, /* ap 43 */
|
|
<0x00017000 0x00217000 0x001000>, /* ap 44 */
|
|
<0x00014000 0x00214000 0x001000>, /* ap 45 */
|
|
<0x00015000 0x00215000 0x001000>, /* ap 46 */
|
|
<0x00018000 0x00218000 0x001000>, /* ap 47 */
|
|
<0x00019000 0x00219000 0x001000>, /* ap 48 */
|
|
<0x00020000 0x00220000 0x001000>, /* ap 49 */
|
|
<0x00021000 0x00221000 0x001000>, /* ap 50 */
|
|
<0x00026000 0x00226000 0x001000>, /* ap 51 */
|
|
<0x00027000 0x00227000 0x001000>, /* ap 52 */
|
|
<0x00028000 0x00228000 0x001000>, /* ap 53 */
|
|
<0x00029000 0x00229000 0x001000>, /* ap 54 */
|
|
<0x0002a000 0x0022a000 0x001000>, /* ap 55 */
|
|
<0x0002b000 0x0022b000 0x001000>, /* ap 56 */
|
|
<0x0001c000 0x0021c000 0x001000>, /* ap 57 */
|
|
<0x0001d000 0x0021d000 0x001000>, /* ap 58 */
|
|
<0x0001a000 0x0021a000 0x001000>, /* ap 73 */
|
|
<0x0001b000 0x0021b000 0x001000>, /* ap 74 */
|
|
<0x00024000 0x00224000 0x001000>, /* ap 75 */
|
|
<0x00025000 0x00225000 0x001000>, /* ap 76 */
|
|
<0x00002000 0x00202000 0x001000>, /* ap 103 */
|
|
<0x00003000 0x00203000 0x001000>, /* ap 104 */
|
|
<0x00008000 0x00208000 0x001000>, /* ap 105 */
|
|
<0x00009000 0x00209000 0x001000>, /* ap 106 */
|
|
<0x00022000 0x00222000 0x001000>, /* ap 107 */
|
|
<0x00023000 0x00223000 0x001000>; /* ap 108 */
|
|
|
|
target-module@2000 { /* 0x4a202000, ap 103 3c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x2000 0x1000>;
|
|
};
|
|
|
|
target-module@4000 { /* 0x4a204000, ap 35 46.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x4000 0x1000>;
|
|
};
|
|
|
|
target-module@6000 { /* 0x4a206000, ap 33 4e.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x6000 0x1000>;
|
|
};
|
|
|
|
target-module@8000 { /* 0x4a208000, ap 105 34.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x8000 0x1000>;
|
|
};
|
|
|
|
target-module@a000 { /* 0x4a20a000, ap 31 30.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xa000 0x1000>;
|
|
};
|
|
|
|
target-module@c000 { /* 0x4a20c000, ap 39 14.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xc000 0x1000>;
|
|
};
|
|
|
|
target-module@10000 { /* 0x4a210000, ap 41 56.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x10000 0x1000>;
|
|
};
|
|
|
|
target-module@12000 { /* 0x4a212000, ap 37 52.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x12000 0x1000>;
|
|
};
|
|
|
|
target-module@14000 { /* 0x4a214000, ap 45 1c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x14000 0x1000>;
|
|
};
|
|
|
|
target-module@16000 { /* 0x4a216000, ap 43 42.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x16000 0x1000>;
|
|
};
|
|
|
|
target-module@18000 { /* 0x4a218000, ap 47 1a.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x18000 0x1000>;
|
|
};
|
|
|
|
target-module@1a000 { /* 0x4a21a000, ap 73 3e.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x1a000 0x1000>;
|
|
};
|
|
|
|
target-module@1c000 { /* 0x4a21c000, ap 57 40.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x1c000 0x1000>;
|
|
};
|
|
|
|
target-module@1e000 { /* 0x4a21e000, ap 29 12.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x1e000 0x1000>;
|
|
};
|
|
|
|
target-module@20000 { /* 0x4a220000, ap 49 4a.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x20000 0x1000>;
|
|
};
|
|
|
|
target-module@22000 { /* 0x4a222000, ap 107 3a.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x22000 0x1000>;
|
|
};
|
|
|
|
target-module@24000 { /* 0x4a224000, ap 75 48.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x24000 0x1000>;
|
|
};
|
|
|
|
target-module@26000 { /* 0x4a226000, ap 51 24.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x26000 0x1000>;
|
|
};
|
|
|
|
target-module@28000 { /* 0x4a228000, ap 53 38.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x28000 0x1000>;
|
|
};
|
|
|
|
target-module@2a000 { /* 0x4a22a000, ap 55 5a.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x2a000 0x1000>;
|
|
};
|
|
};
|
|
|
|
segment@280000 { /* 0x4a280000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
|
|
segment@300000 { /* 0x4a300000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
&l4_per { /* 0x48000000 */
|
|
compatible = "ti,omap5-l4-per", "simple-bus";
|
|
reg = <0x48000000 0x800>,
|
|
<0x48000800 0x800>,
|
|
<0x48001000 0x400>,
|
|
<0x48001400 0x400>,
|
|
<0x48001800 0x400>,
|
|
<0x48001c00 0x400>;
|
|
reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */
|
|
<0x00200000 0x48200000 0x200000>; /* segment 1 */
|
|
|
|
segment@0 { /* 0x48000000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
|
|
<0x00001000 0x00001000 0x000400>, /* ap 1 */
|
|
<0x00000800 0x00000800 0x000800>, /* ap 2 */
|
|
<0x00020000 0x00020000 0x001000>, /* ap 3 */
|
|
<0x00021000 0x00021000 0x001000>, /* ap 4 */
|
|
<0x00032000 0x00032000 0x001000>, /* ap 5 */
|
|
<0x00033000 0x00033000 0x001000>, /* ap 6 */
|
|
<0x00034000 0x00034000 0x001000>, /* ap 7 */
|
|
<0x00035000 0x00035000 0x001000>, /* ap 8 */
|
|
<0x00036000 0x00036000 0x001000>, /* ap 9 */
|
|
<0x00037000 0x00037000 0x001000>, /* ap 10 */
|
|
<0x0003e000 0x0003e000 0x001000>, /* ap 11 */
|
|
<0x0003f000 0x0003f000 0x001000>, /* ap 12 */
|
|
<0x00055000 0x00055000 0x001000>, /* ap 13 */
|
|
<0x00056000 0x00056000 0x001000>, /* ap 14 */
|
|
<0x00057000 0x00057000 0x001000>, /* ap 15 */
|
|
<0x00058000 0x00058000 0x001000>, /* ap 16 */
|
|
<0x00059000 0x00059000 0x001000>, /* ap 17 */
|
|
<0x0005a000 0x0005a000 0x001000>, /* ap 18 */
|
|
<0x0005b000 0x0005b000 0x001000>, /* ap 19 */
|
|
<0x0005c000 0x0005c000 0x001000>, /* ap 20 */
|
|
<0x0005d000 0x0005d000 0x001000>, /* ap 21 */
|
|
<0x0005e000 0x0005e000 0x001000>, /* ap 22 */
|
|
<0x00060000 0x00060000 0x001000>, /* ap 23 */
|
|
<0x0006a000 0x0006a000 0x001000>, /* ap 24 */
|
|
<0x0006b000 0x0006b000 0x001000>, /* ap 25 */
|
|
<0x0006c000 0x0006c000 0x001000>, /* ap 26 */
|
|
<0x0006d000 0x0006d000 0x001000>, /* ap 27 */
|
|
<0x0006e000 0x0006e000 0x001000>, /* ap 28 */
|
|
<0x0006f000 0x0006f000 0x001000>, /* ap 29 */
|
|
<0x00070000 0x00070000 0x001000>, /* ap 30 */
|
|
<0x00071000 0x00071000 0x001000>, /* ap 31 */
|
|
<0x00072000 0x00072000 0x001000>, /* ap 32 */
|
|
<0x00073000 0x00073000 0x001000>, /* ap 33 */
|
|
<0x00061000 0x00061000 0x001000>, /* ap 34 */
|
|
<0x00053000 0x00053000 0x001000>, /* ap 35 */
|
|
<0x00054000 0x00054000 0x001000>, /* ap 36 */
|
|
<0x000b2000 0x000b2000 0x001000>, /* ap 37 */
|
|
<0x000b3000 0x000b3000 0x001000>, /* ap 38 */
|
|
<0x00078000 0x00078000 0x001000>, /* ap 39 */
|
|
<0x00079000 0x00079000 0x001000>, /* ap 40 */
|
|
<0x00086000 0x00086000 0x001000>, /* ap 41 */
|
|
<0x00087000 0x00087000 0x001000>, /* ap 42 */
|
|
<0x00088000 0x00088000 0x001000>, /* ap 43 */
|
|
<0x00089000 0x00089000 0x001000>, /* ap 44 */
|
|
<0x00051000 0x00051000 0x001000>, /* ap 45 */
|
|
<0x00052000 0x00052000 0x001000>, /* ap 46 */
|
|
<0x00098000 0x00098000 0x001000>, /* ap 47 */
|
|
<0x00099000 0x00099000 0x001000>, /* ap 48 */
|
|
<0x0009a000 0x0009a000 0x001000>, /* ap 49 */
|
|
<0x0009b000 0x0009b000 0x001000>, /* ap 50 */
|
|
<0x0009c000 0x0009c000 0x001000>, /* ap 51 */
|
|
<0x0009d000 0x0009d000 0x001000>, /* ap 52 */
|
|
<0x00068000 0x00068000 0x001000>, /* ap 53 */
|
|
<0x00069000 0x00069000 0x001000>, /* ap 54 */
|
|
<0x00090000 0x00090000 0x002000>, /* ap 55 */
|
|
<0x00092000 0x00092000 0x001000>, /* ap 56 */
|
|
<0x000a4000 0x000a4000 0x001000>, /* ap 57 */
|
|
<0x000a6000 0x000a6000 0x001000>, /* ap 58 */
|
|
<0x000a8000 0x000a8000 0x004000>, /* ap 59 */
|
|
<0x000ac000 0x000ac000 0x001000>, /* ap 60 */
|
|
<0x000ad000 0x000ad000 0x001000>, /* ap 61 */
|
|
<0x000ae000 0x000ae000 0x001000>, /* ap 62 */
|
|
<0x00066000 0x00066000 0x001000>, /* ap 63 */
|
|
<0x00067000 0x00067000 0x001000>, /* ap 64 */
|
|
<0x000b4000 0x000b4000 0x001000>, /* ap 65 */
|
|
<0x000b5000 0x000b5000 0x001000>, /* ap 66 */
|
|
<0x000b8000 0x000b8000 0x001000>, /* ap 67 */
|
|
<0x000b9000 0x000b9000 0x001000>, /* ap 68 */
|
|
<0x000ba000 0x000ba000 0x001000>, /* ap 69 */
|
|
<0x000bb000 0x000bb000 0x001000>, /* ap 70 */
|
|
<0x000d1000 0x000d1000 0x001000>, /* ap 71 */
|
|
<0x000d2000 0x000d2000 0x001000>, /* ap 72 */
|
|
<0x000d5000 0x000d5000 0x001000>, /* ap 73 */
|
|
<0x000d6000 0x000d6000 0x001000>, /* ap 74 */
|
|
<0x000a2000 0x000a2000 0x001000>, /* ap 75 */
|
|
<0x000a3000 0x000a3000 0x001000>, /* ap 76 */
|
|
<0x00001400 0x00001400 0x000400>, /* ap 77 */
|
|
<0x00001800 0x00001800 0x000400>, /* ap 78 */
|
|
<0x00001c00 0x00001c00 0x000400>, /* ap 79 */
|
|
<0x000a5000 0x000a5000 0x001000>, /* ap 80 */
|
|
<0x0007a000 0x0007a000 0x001000>, /* ap 81 */
|
|
<0x0007b000 0x0007b000 0x001000>, /* ap 82 */
|
|
<0x0007c000 0x0007c000 0x001000>, /* ap 83 */
|
|
<0x0007d000 0x0007d000 0x001000>; /* ap 84 */
|
|
|
|
target-module@20000 { /* 0x48020000, ap 3 04.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "uart3";
|
|
reg = <0x20050 0x4>,
|
|
<0x20054 0x4>,
|
|
<0x20058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x20000 0x1000>;
|
|
|
|
uart3: serial@0 {
|
|
compatible = "ti,omap4-uart";
|
|
reg = <0x0 0x100>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
};
|
|
};
|
|
|
|
target-module@32000 { /* 0x48032000, ap 5 3e.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
ti,hwmods = "timer2";
|
|
reg = <0x32000 0x4>,
|
|
<0x32010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x32000 0x1000>;
|
|
|
|
timer2: timer@0 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x0 0x80>;
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>;
|
|
clock-names = "fck";
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
target-module@34000 { /* 0x48034000, ap 7 46.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
ti,hwmods = "timer3";
|
|
reg = <0x34000 0x4>,
|
|
<0x34010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x34000 0x1000>;
|
|
|
|
timer3: timer@0 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x0 0x80>;
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>;
|
|
clock-names = "fck";
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
target-module@36000 { /* 0x48036000, ap 9 4e.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
ti,hwmods = "timer4";
|
|
reg = <0x36000 0x4>,
|
|
<0x36010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x36000 0x1000>;
|
|
|
|
timer4: timer@0 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x0 0x80>;
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>;
|
|
clock-names = "fck";
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
target-module@3e000 { /* 0x4803e000, ap 11 56.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
ti,hwmods = "timer9";
|
|
reg = <0x3e000 0x4>,
|
|
<0x3e010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x3e000 0x1000>;
|
|
|
|
timer9: timer@0 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x0 0x80>;
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>;
|
|
clock-names = "fck";
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,timer-pwm;
|
|
};
|
|
};
|
|
|
|
target-module@51000 { /* 0x48051000, ap 45 2e.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "gpio7";
|
|
reg = <0x51000 0x4>,
|
|
<0x51010 0x4>,
|
|
<0x51114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 0>,
|
|
<&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 8>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x51000 0x1000>;
|
|
|
|
gpio7: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
target-module@53000 { /* 0x48053000, ap 35 36.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "gpio8";
|
|
reg = <0x53000 0x4>,
|
|
<0x53010 0x4>,
|
|
<0x53114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 0>,
|
|
<&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 8>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x53000 0x1000>;
|
|
|
|
gpio8: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
target-module@55000 { /* 0x48055000, ap 13 0e.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "gpio2";
|
|
reg = <0x55000 0x4>,
|
|
<0x55010 0x4>,
|
|
<0x55114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 0>,
|
|
<&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 8>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x55000 0x1000>;
|
|
|
|
gpio2: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
target-module@57000 { /* 0x48057000, ap 15 06.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "gpio3";
|
|
reg = <0x57000 0x4>,
|
|
<0x57010 0x4>,
|
|
<0x57114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 0>,
|
|
<&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 8>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x57000 0x1000>;
|
|
|
|
gpio3: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
target-module@59000 { /* 0x48059000, ap 17 16.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "gpio4";
|
|
reg = <0x59000 0x4>,
|
|
<0x59010 0x4>,
|
|
<0x59114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 0>,
|
|
<&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 8>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x59000 0x1000>;
|
|
|
|
gpio4: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "gpio5";
|
|
reg = <0x5b000 0x4>,
|
|
<0x5b010 0x4>,
|
|
<0x5b114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 0>,
|
|
<&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 8>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x5b000 0x1000>;
|
|
|
|
gpio5: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
target-module@5d000 { /* 0x4805d000, ap 21 26.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "gpio6";
|
|
reg = <0x5d000 0x4>,
|
|
<0x5d010 0x4>,
|
|
<0x5d114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 0>,
|
|
<&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 8>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x5d000 0x1000>;
|
|
|
|
gpio6: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
target-module@60000 { /* 0x48060000, ap 23 24.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "i2c3";
|
|
reg = <0x60000 0x8>,
|
|
<0x60010 0x8>,
|
|
<0x60090 0x8>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_I2C3_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x60000 0x1000>;
|
|
|
|
i2c3: i2c@0 {
|
|
compatible = "ti,omap4-i2c";
|
|
reg = <0x0 0x100>;
|
|
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
target-module@66000 { /* 0x48066000, ap 63 4c.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "uart5";
|
|
reg = <0x66050 0x4>,
|
|
<0x66054 0x4>,
|
|
<0x66058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_UART5_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x66000 0x1000>;
|
|
|
|
uart5: serial@0 {
|
|
compatible = "ti,omap4-uart";
|
|
reg = <0x0 0x100>;
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
};
|
|
};
|
|
|
|
target-module@68000 { /* 0x48068000, ap 53 54.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "uart6";
|
|
reg = <0x68050 0x4>,
|
|
<0x68054 0x4>,
|
|
<0x68058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_UART6_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x68000 0x1000>;
|
|
|
|
uart6: serial@0 {
|
|
compatible = "ti,omap4-uart";
|
|
reg = <0x0 0x100>;
|
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
};
|
|
};
|
|
|
|
target-module@6a000 { /* 0x4806a000, ap 24 0a.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "uart1";
|
|
reg = <0x6a050 0x4>,
|
|
<0x6a054 0x4>,
|
|
<0x6a058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_UART1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x6a000 0x1000>;
|
|
|
|
uart1: serial@0 {
|
|
compatible = "ti,omap4-uart";
|
|
reg = <0x0 0x100>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
};
|
|
};
|
|
|
|
target-module@6c000 { /* 0x4806c000, ap 26 22.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "uart2";
|
|
reg = <0x6c050 0x4>,
|
|
<0x6c054 0x4>,
|
|
<0x6c058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_UART2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x6c000 0x1000>;
|
|
|
|
uart2: serial@0 {
|
|
compatible = "ti,omap4-uart";
|
|
reg = <0x0 0x100>;
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
};
|
|
};
|
|
|
|
target-module@6e000 { /* 0x4806e000, ap 28 44.1 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "uart4";
|
|
reg = <0x6e050 0x4>,
|
|
<0x6e054 0x4>,
|
|
<0x6e058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_UART4_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x6e000 0x1000>;
|
|
|
|
uart4: serial@0 {
|
|
compatible = "ti,omap4-uart";
|
|
reg = <0x0 0x100>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
};
|
|
};
|
|
|
|
target-module@70000 { /* 0x48070000, ap 30 14.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "i2c1";
|
|
reg = <0x70000 0x8>,
|
|
<0x70010 0x8>,
|
|
<0x70090 0x8>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_I2C1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x70000 0x1000>;
|
|
|
|
i2c1: i2c@0 {
|
|
compatible = "ti,omap4-i2c";
|
|
reg = <0x0 0x100>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
target-module@72000 { /* 0x48072000, ap 32 1c.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "i2c2";
|
|
reg = <0x72000 0x8>,
|
|
<0x72010 0x8>,
|
|
<0x72090 0x8>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_I2C2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x72000 0x1000>;
|
|
|
|
i2c2: i2c@0 {
|
|
compatible = "ti,omap4-i2c";
|
|
reg = <0x0 0x100>;
|
|
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
target-module@78000 { /* 0x48078000, ap 39 12.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x78000 0x1000>;
|
|
};
|
|
|
|
target-module@7a000 { /* 0x4807a000, ap 81 2c.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "i2c4";
|
|
reg = <0x7a000 0x8>,
|
|
<0x7a010 0x8>,
|
|
<0x7a090 0x8>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_I2C4_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x7a000 0x1000>;
|
|
|
|
i2c4: i2c@0 {
|
|
compatible = "ti,omap4-i2c";
|
|
reg = <0x0 0x100>;
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
target-module@7c000 { /* 0x4807c000, ap 83 34.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "i2c5";
|
|
reg = <0x7c000 0x8>,
|
|
<0x7c010 0x8>,
|
|
<0x7c090 0x8>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_I2C5_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x7c000 0x1000>;
|
|
|
|
i2c5: i2c@0 {
|
|
compatible = "ti,omap4-i2c";
|
|
reg = <0x0 0x100>;
|
|
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
target-module@86000 { /* 0x48086000, ap 41 5e.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
ti,hwmods = "timer10";
|
|
reg = <0x86000 0x4>,
|
|
<0x86010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x86000 0x1000>;
|
|
|
|
timer10: timer@0 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x0 0x80>;
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>;
|
|
clock-names = "fck";
|
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,timer-pwm;
|
|
};
|
|
};
|
|
|
|
target-module@88000 { /* 0x48088000, ap 43 66.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
ti,hwmods = "timer11";
|
|
reg = <0x88000 0x4>,
|
|
<0x88010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x88000 0x1000>;
|
|
|
|
timer11: timer@0 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x0 0x80>;
|
|
clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>;
|
|
clock-names = "fck";
|
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,timer-pwm;
|
|
};
|
|
};
|
|
|
|
target-module@90000 { /* 0x48090000, ap 55 1a.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x90000 0x2000>;
|
|
};
|
|
|
|
target-module@98000 { /* 0x48098000, ap 47 08.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "mcspi1";
|
|
reg = <0x98000 0x4>,
|
|
<0x98010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_MCSPI1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x98000 0x1000>;
|
|
|
|
mcspi1: spi@0 {
|
|
compatible = "ti,omap4-mcspi";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,spi-num-cs = <4>;
|
|
dmas = <&sdma 35>,
|
|
<&sdma 36>,
|
|
<&sdma 37>,
|
|
<&sdma 38>,
|
|
<&sdma 39>,
|
|
<&sdma 40>,
|
|
<&sdma 41>,
|
|
<&sdma 42>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1",
|
|
"tx2", "rx2", "tx3", "rx3";
|
|
};
|
|
};
|
|
|
|
target-module@9a000 { /* 0x4809a000, ap 49 10.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "mcspi2";
|
|
reg = <0x9a000 0x4>,
|
|
<0x9a010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_MCSPI2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x9a000 0x1000>;
|
|
|
|
mcspi2: spi@0 {
|
|
compatible = "ti,omap4-mcspi";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&sdma 43>,
|
|
<&sdma 44>,
|
|
<&sdma 45>,
|
|
<&sdma 46>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
};
|
|
};
|
|
|
|
target-module@9c000 { /* 0x4809c000, ap 51 3a.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "mmc1";
|
|
reg = <0x9c000 0x4>,
|
|
<0x9c010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
|
|
clocks = <&l3init_clkctrl OMAP5_MMC1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x9c000 0x1000>;
|
|
|
|
mmc1: mmc@0 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,dual-volt;
|
|
ti,needs-special-reset;
|
|
dmas = <&sdma 61>, <&sdma 62>;
|
|
dma-names = "tx", "rx";
|
|
pbias-supply = <&pbias_mmc_reg>;
|
|
};
|
|
};
|
|
|
|
target-module@a2000 { /* 0x480a2000, ap 75 02.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xa2000 0x1000>;
|
|
};
|
|
|
|
target-module@a4000 { /* 0x480a4000, ap 57 3c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x000a4000 0x00001000>,
|
|
<0x00001000 0x000a5000 0x00001000>;
|
|
};
|
|
|
|
target-module@a8000 { /* 0x480a8000, ap 59 2a.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xa8000 0x4000>;
|
|
};
|
|
|
|
target-module@ad000 { /* 0x480ad000, ap 61 20.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "mmc3";
|
|
reg = <0xad000 0x4>,
|
|
<0xad010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_MMC3_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xad000 0x1000>;
|
|
|
|
mmc3: mmc@0 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,needs-special-reset;
|
|
dmas = <&sdma 77>, <&sdma 78>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
};
|
|
|
|
target-module@b2000 { /* 0x480b2000, ap 37 0c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xb2000 0x1000>;
|
|
};
|
|
|
|
target-module@b4000 { /* 0x480b4000, ap 65 42.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "mmc2";
|
|
reg = <0xb4000 0x4>,
|
|
<0xb4010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
|
|
clocks = <&l3init_clkctrl OMAP5_MMC2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xb4000 0x1000>;
|
|
|
|
mmc2: mmc@0 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,needs-special-reset;
|
|
dmas = <&sdma 47>, <&sdma 48>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
};
|
|
|
|
target-module@b8000 { /* 0x480b8000, ap 67 32.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "mcspi3";
|
|
reg = <0xb8000 0x4>,
|
|
<0xb8010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_MCSPI3_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xb8000 0x1000>;
|
|
|
|
mcspi3: spi@0 {
|
|
compatible = "ti,omap4-mcspi";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&sdma 15>, <&sdma 16>;
|
|
dma-names = "tx0", "rx0";
|
|
};
|
|
};
|
|
|
|
target-module@ba000 { /* 0x480ba000, ap 69 18.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "mcspi4";
|
|
reg = <0xba000 0x4>,
|
|
<0xba010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_MCSPI4_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xba000 0x1000>;
|
|
|
|
mcspi4: spi@0 {
|
|
compatible = "ti,omap4-mcspi";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,spi-num-cs = <1>;
|
|
dmas = <&sdma 70>, <&sdma 71>;
|
|
dma-names = "tx0", "rx0";
|
|
};
|
|
};
|
|
|
|
target-module@d1000 { /* 0x480d1000, ap 71 28.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "mmc4";
|
|
reg = <0xd1000 0x4>,
|
|
<0xd1010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_MMC4_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xd1000 0x1000>;
|
|
|
|
mmc4: mmc@0 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,needs-special-reset;
|
|
dmas = <&sdma 57>, <&sdma 58>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
};
|
|
|
|
target-module@d5000 { /* 0x480d5000, ap 73 30.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
ti,hwmods = "mmc5";
|
|
reg = <0xd5000 0x4>,
|
|
<0xd5010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
|
|
clocks = <&l4per_clkctrl OMAP5_MMC5_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xd5000 0x1000>;
|
|
|
|
mmc5: mmc@0 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,needs-special-reset;
|
|
dmas = <&sdma 59>, <&sdma 60>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
};
|
|
};
|
|
|
|
segment@200000 { /* 0x48200000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
&l4_wkup { /* 0x4ae00000 */
|
|
compatible = "ti,omap5-l4-wkup", "simple-bus";
|
|
reg = <0x4ae00000 0x800>,
|
|
<0x4ae00800 0x800>,
|
|
<0x4ae01000 0x1000>;
|
|
reg-names = "ap", "la", "ia0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x4ae00000 0x010000>, /* segment 0 */
|
|
<0x00010000 0x4ae10000 0x010000>, /* segment 1 */
|
|
<0x00020000 0x4ae20000 0x010000>; /* segment 2 */
|
|
|
|
segment@0 { /* 0x4ae00000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
|
|
<0x00001000 0x00001000 0x001000>, /* ap 1 */
|
|
<0x00000800 0x00000800 0x000800>, /* ap 2 */
|
|
<0x00006000 0x00006000 0x002000>, /* ap 3 */
|
|
<0x00008000 0x00008000 0x001000>, /* ap 4 */
|
|
<0x0000a000 0x0000a000 0x001000>, /* ap 15 */
|
|
<0x0000b000 0x0000b000 0x001000>, /* ap 16 */
|
|
<0x00004000 0x00004000 0x001000>, /* ap 17 */
|
|
<0x00005000 0x00005000 0x001000>, /* ap 18 */
|
|
<0x0000c000 0x0000c000 0x001000>, /* ap 19 */
|
|
<0x0000d000 0x0000d000 0x001000>; /* ap 20 */
|
|
|
|
target-module@4000 { /* 0x4ae04000, ap 17 20.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "counter_32k";
|
|
reg = <0x4000 0x4>,
|
|
<0x4010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>;
|
|
/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
|
|
clocks = <&wkupaon_clkctrl OMAP5_COUNTER_32K_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x4000 0x1000>;
|
|
|
|
counter32k: counter@0 {
|
|
compatible = "ti,omap-counter32k";
|
|
reg = <0x0 0x40>;
|
|
};
|
|
};
|
|
|
|
target-module@6000 { /* 0x4ae06000, ap 3 08.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0x6000 0x4>;
|
|
reg-names = "rev";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x6000 0x2000>;
|
|
|
|
prm: prm@0 {
|
|
compatible = "ti,omap5-prm", "simple-bus";
|
|
reg = <0x0 0x2000>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x2000>;
|
|
|
|
prm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
prm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@a000 { /* 0x4ae0a000, ap 15 2c.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0xa000 0x4>;
|
|
reg-names = "rev";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xa000 0x1000>;
|
|
|
|
scrm: scrm@0 {
|
|
compatible = "ti,omap5-scrm";
|
|
reg = <0x0 0x1000>;
|
|
|
|
scrm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
scrm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@c000 { /* 0x4ae0c000, ap 19 28.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0xc000 0x4>;
|
|
reg-names = "rev";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xc000 0x1000>;
|
|
|
|
omap5_pmx_wkup: pinmux@840 {
|
|
compatible = "ti,omap5-padconf",
|
|
"pinctrl-single";
|
|
reg = <0x840 0x003c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#pinctrl-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
pinctrl-single,register-width = <16>;
|
|
pinctrl-single,function-mask = <0x7fff>;
|
|
};
|
|
|
|
omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@da0 {
|
|
compatible = "ti,omap5-scm-wkup-pad-conf",
|
|
"simple-bus";
|
|
reg = <0xda0 0x60>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x60>;
|
|
|
|
scm_wkup_pad_conf: scm_conf@0 {
|
|
compatible = "syscon", "simple-bus";
|
|
reg = <0x0 0x60>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x0 0x60>;
|
|
|
|
scm_wkup_pad_conf_clocks: clocks@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
segment@10000 { /* 0x4ae10000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */
|
|
<0x00001000 0x00011000 0x001000>, /* ap 6 */
|
|
<0x00004000 0x00014000 0x001000>, /* ap 7 */
|
|
<0x00005000 0x00015000 0x001000>, /* ap 8 */
|
|
<0x00008000 0x00018000 0x001000>, /* ap 9 */
|
|
<0x00009000 0x00019000 0x001000>, /* ap 10 */
|
|
<0x0000c000 0x0001c000 0x001000>, /* ap 11 */
|
|
<0x0000d000 0x0001d000 0x001000>; /* ap 12 */
|
|
|
|
target-module@0 { /* 0x4ae10000, ap 5 10.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "gpio1";
|
|
reg = <0x0 0x4>,
|
|
<0x10 0x4>,
|
|
<0x114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
|
|
clocks = <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 0>,
|
|
<&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 8>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x1000>;
|
|
|
|
gpio1: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,gpio-always-on;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
target-module@4000 { /* 0x4ae14000, ap 7 14.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "wd_timer2";
|
|
reg = <0x4000 0x4>,
|
|
<0x4010 0x4>,
|
|
<0x4014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
|
|
SYSC_OMAP2_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
|
|
clocks = <&wkupaon_clkctrl OMAP5_WD_TIMER2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x4000 0x1000>;
|
|
|
|
wdt2: wdt@0 {
|
|
compatible = "ti,omap5-wdt", "ti,omap3-wdt";
|
|
reg = <0x0 0x80>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
target-module@8000 { /* 0x4ae18000, ap 9 18.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
ti,hwmods = "timer1";
|
|
reg = <0x8000 0x4>,
|
|
<0x8010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
|
|
SYSC_OMAP4_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
|
|
clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x8000 0x1000>;
|
|
|
|
timer1: timer@0 {
|
|
compatible = "ti,omap5430-timer";
|
|
reg = <0x0 0x80>;
|
|
clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>;
|
|
clock-names = "fck";
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
ti,timer-alwon;
|
|
};
|
|
};
|
|
|
|
target-module@c000 { /* 0x4ae1c000, ap 11 1c.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
ti,hwmods = "kbd";
|
|
reg = <0xc000 0x4>,
|
|
<0xc010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
|
|
SYSC_OMAP2_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
|
|
clocks = <&wkupaon_clkctrl OMAP5_KBD_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xc000 0x1000>;
|
|
|
|
keypad: keypad@0 {
|
|
compatible = "ti,omap4-keypad";
|
|
reg = <0x0 0x400>;
|
|
};
|
|
};
|
|
};
|
|
|
|
segment@20000 { /* 0x4ae20000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */
|
|
<0x0000a000 0x0002a000 0x001000>, /* ap 14 */
|
|
<0x00000000 0x00020000 0x001000>, /* ap 21 */
|
|
<0x00001000 0x00021000 0x001000>, /* ap 22 */
|
|
<0x00002000 0x00022000 0x001000>, /* ap 23 */
|
|
<0x00003000 0x00023000 0x001000>, /* ap 24 */
|
|
<0x00007000 0x00027000 0x000400>, /* ap 25 */
|
|
<0x00008000 0x00028000 0x000800>, /* ap 26 */
|
|
<0x00009000 0x00029000 0x000100>, /* ap 27 */
|
|
<0x00008800 0x00028800 0x000200>, /* ap 28 */
|
|
<0x00008a00 0x00028a00 0x000100>; /* ap 29 */
|
|
|
|
target-module@0 { /* 0x4ae20000, ap 21 04.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x1000>;
|
|
};
|
|
|
|
target-module@2000 { /* 0x4ae22000, ap 23 0c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x2000 0x1000>;
|
|
};
|
|
|
|
target-module@6000 { /* 0x4ae26000, ap 13 24.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00006000 0x00001000>,
|
|
<0x00001000 0x00007000 0x00000400>,
|
|
<0x00002000 0x00008000 0x00000800>,
|
|
<0x00002800 0x00008800 0x00000200>,
|
|
<0x00002a00 0x00008a00 0x00000100>,
|
|
<0x00003000 0x00009000 0x00000100>;
|
|
};
|
|
};
|
|
};
|
|
|