mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 15:04:27 +08:00
80ba77dfbc
When we do FLR and save PCI config we did it in the wrong order. The end result was that if a PCI device was unbind from its driver, then binded to xen-pciback, and then back to its driver we would get: > lspci -s 04:00.0 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 13:42:12 # 4 :~/ > echo "0000:04:00.0" > /sys/bus/pci/drivers/pciback/unbind > modprobe e1000e e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:04:00.0: Disabling ASPM L0s L1 e1000e 0000:04:00.0: enabling device (0000 -> 0002) xen: registering gsi 48 triggering 0 polarity 1 Already setup the GSI :48 e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e: probe of 0000:04:00.0 failed with error -2 This fixes it by first saving the PCI configuration space, then doing the FLR. Reported-by: Ren, Yongjie <yongjie.ren@intel.com> Reported-and-Tested-by: Tobias Geiger <tobias.geiger@vido.info> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: stable@vger.kernel.org |
||
|---|---|---|
| .. | ||
| xen-pciback | ||
| xenbus | ||
| xenfs | ||
| acpi.c | ||
| balloon.c | ||
| biomerge.c | ||
| cpu_hotplug.c | ||
| events.c | ||
| evtchn.c | ||
| features.c | ||
| gntalloc.c | ||
| gntdev.c | ||
| grant-table.c | ||
| Kconfig | ||
| Makefile | ||
| manage.c | ||
| mcelog.c | ||
| pci.c | ||
| pcpu.c | ||
| platform-pci.c | ||
| privcmd.c | ||
| privcmd.h | ||
| swiotlb-xen.c | ||
| sys-hypervisor.c | ||
| tmem.c | ||
| xen-acpi-processor.c | ||
| xen-balloon.c | ||
| xen-selfballoon.c | ||
| xencomm.c | ||