mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 00:34:20 +08:00
3f4b57ad07
Commit25d27c4f68
("ASoC: pcm512x: Add support for more data formats") breaks the TSE-850 device, which is using a pcm5142 in I2S and CBM_CFS mode (maybe not relevant). Without this fix, the result is: pcm512x 0-004c: Failed to set data format: -16 And after that, no sound. This fix is not 100% correct. The datasheet of at least the pcm5142 states that four bits (0xcc) in the I2S_1 register are "RSV" ("Reserved. Do not access.") and no hint is given as to what the initial values are supposed to be. So, specifying defaults for these bits is wrong. But perhaps better than a broken driver? Fixes:25d27c4f68
("ASoC: pcm512x: Add support for more data formats") Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Kirill Marinushkin <kmarinushkin@birdec.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/2d221984-7a2e-7006-0f8a-ffb5f64ee885@axentia.se Signed-off-by: Mark Brown <broonie@kernel.org>
1771 lines
46 KiB
C
1771 lines
46 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Driver for the PCM512x CODECs
|
|
*
|
|
* Author: Mark Brown <broonie@kernel.org>
|
|
* Copyright 2014 Linaro Ltd
|
|
*/
|
|
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/gcd.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "pcm512x.h"
|
|
|
|
#define PCM512x_NUM_SUPPLIES 3
|
|
static const char * const pcm512x_supply_names[PCM512x_NUM_SUPPLIES] = {
|
|
"AVDD",
|
|
"DVDD",
|
|
"CPVDD",
|
|
};
|
|
|
|
struct pcm512x_priv {
|
|
struct regmap *regmap;
|
|
struct clk *sclk;
|
|
struct regulator_bulk_data supplies[PCM512x_NUM_SUPPLIES];
|
|
struct notifier_block supply_nb[PCM512x_NUM_SUPPLIES];
|
|
int fmt;
|
|
int pll_in;
|
|
int pll_out;
|
|
int pll_r;
|
|
int pll_j;
|
|
int pll_d;
|
|
int pll_p;
|
|
unsigned long real_pll;
|
|
unsigned long overclock_pll;
|
|
unsigned long overclock_dac;
|
|
unsigned long overclock_dsp;
|
|
int mute;
|
|
struct mutex mutex;
|
|
unsigned int bclk_ratio;
|
|
};
|
|
|
|
/*
|
|
* We can't use the same notifier block for more than one supply and
|
|
* there's no way I can see to get from a callback to the caller
|
|
* except container_of().
|
|
*/
|
|
#define PCM512x_REGULATOR_EVENT(n) \
|
|
static int pcm512x_regulator_event_##n(struct notifier_block *nb, \
|
|
unsigned long event, void *data) \
|
|
{ \
|
|
struct pcm512x_priv *pcm512x = container_of(nb, struct pcm512x_priv, \
|
|
supply_nb[n]); \
|
|
if (event & REGULATOR_EVENT_DISABLE) { \
|
|
regcache_mark_dirty(pcm512x->regmap); \
|
|
regcache_cache_only(pcm512x->regmap, true); \
|
|
} \
|
|
return 0; \
|
|
}
|
|
|
|
PCM512x_REGULATOR_EVENT(0)
|
|
PCM512x_REGULATOR_EVENT(1)
|
|
PCM512x_REGULATOR_EVENT(2)
|
|
|
|
static const struct reg_default pcm512x_reg_defaults[] = {
|
|
{ PCM512x_RESET, 0x00 },
|
|
{ PCM512x_POWER, 0x00 },
|
|
{ PCM512x_MUTE, 0x00 },
|
|
{ PCM512x_DSP, 0x00 },
|
|
{ PCM512x_PLL_REF, 0x00 },
|
|
{ PCM512x_DAC_REF, 0x00 },
|
|
{ PCM512x_DAC_ROUTING, 0x11 },
|
|
{ PCM512x_DSP_PROGRAM, 0x01 },
|
|
{ PCM512x_CLKDET, 0x00 },
|
|
{ PCM512x_AUTO_MUTE, 0x00 },
|
|
{ PCM512x_ERROR_DETECT, 0x00 },
|
|
{ PCM512x_DIGITAL_VOLUME_1, 0x00 },
|
|
{ PCM512x_DIGITAL_VOLUME_2, 0x30 },
|
|
{ PCM512x_DIGITAL_VOLUME_3, 0x30 },
|
|
{ PCM512x_DIGITAL_MUTE_1, 0x22 },
|
|
{ PCM512x_DIGITAL_MUTE_2, 0x00 },
|
|
{ PCM512x_DIGITAL_MUTE_3, 0x07 },
|
|
{ PCM512x_OUTPUT_AMPLITUDE, 0x00 },
|
|
{ PCM512x_ANALOG_GAIN_CTRL, 0x00 },
|
|
{ PCM512x_UNDERVOLTAGE_PROT, 0x00 },
|
|
{ PCM512x_ANALOG_MUTE_CTRL, 0x00 },
|
|
{ PCM512x_ANALOG_GAIN_BOOST, 0x00 },
|
|
{ PCM512x_VCOM_CTRL_1, 0x00 },
|
|
{ PCM512x_VCOM_CTRL_2, 0x01 },
|
|
{ PCM512x_BCLK_LRCLK_CFG, 0x00 },
|
|
{ PCM512x_MASTER_MODE, 0x7c },
|
|
{ PCM512x_GPIO_DACIN, 0x00 },
|
|
{ PCM512x_GPIO_PLLIN, 0x00 },
|
|
{ PCM512x_SYNCHRONIZE, 0x10 },
|
|
{ PCM512x_PLL_COEFF_0, 0x00 },
|
|
{ PCM512x_PLL_COEFF_1, 0x00 },
|
|
{ PCM512x_PLL_COEFF_2, 0x00 },
|
|
{ PCM512x_PLL_COEFF_3, 0x00 },
|
|
{ PCM512x_PLL_COEFF_4, 0x00 },
|
|
{ PCM512x_DSP_CLKDIV, 0x00 },
|
|
{ PCM512x_DAC_CLKDIV, 0x00 },
|
|
{ PCM512x_NCP_CLKDIV, 0x00 },
|
|
{ PCM512x_OSR_CLKDIV, 0x00 },
|
|
{ PCM512x_MASTER_CLKDIV_1, 0x00 },
|
|
{ PCM512x_MASTER_CLKDIV_2, 0x00 },
|
|
{ PCM512x_FS_SPEED_MODE, 0x00 },
|
|
{ PCM512x_IDAC_1, 0x01 },
|
|
{ PCM512x_IDAC_2, 0x00 },
|
|
{ PCM512x_I2S_1, 0x02 },
|
|
{ PCM512x_I2S_2, 0x00 },
|
|
};
|
|
|
|
static bool pcm512x_readable(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case PCM512x_RESET:
|
|
case PCM512x_POWER:
|
|
case PCM512x_MUTE:
|
|
case PCM512x_PLL_EN:
|
|
case PCM512x_SPI_MISO_FUNCTION:
|
|
case PCM512x_DSP:
|
|
case PCM512x_GPIO_EN:
|
|
case PCM512x_BCLK_LRCLK_CFG:
|
|
case PCM512x_DSP_GPIO_INPUT:
|
|
case PCM512x_MASTER_MODE:
|
|
case PCM512x_PLL_REF:
|
|
case PCM512x_DAC_REF:
|
|
case PCM512x_GPIO_DACIN:
|
|
case PCM512x_GPIO_PLLIN:
|
|
case PCM512x_SYNCHRONIZE:
|
|
case PCM512x_PLL_COEFF_0:
|
|
case PCM512x_PLL_COEFF_1:
|
|
case PCM512x_PLL_COEFF_2:
|
|
case PCM512x_PLL_COEFF_3:
|
|
case PCM512x_PLL_COEFF_4:
|
|
case PCM512x_DSP_CLKDIV:
|
|
case PCM512x_DAC_CLKDIV:
|
|
case PCM512x_NCP_CLKDIV:
|
|
case PCM512x_OSR_CLKDIV:
|
|
case PCM512x_MASTER_CLKDIV_1:
|
|
case PCM512x_MASTER_CLKDIV_2:
|
|
case PCM512x_FS_SPEED_MODE:
|
|
case PCM512x_IDAC_1:
|
|
case PCM512x_IDAC_2:
|
|
case PCM512x_ERROR_DETECT:
|
|
case PCM512x_I2S_1:
|
|
case PCM512x_I2S_2:
|
|
case PCM512x_DAC_ROUTING:
|
|
case PCM512x_DSP_PROGRAM:
|
|
case PCM512x_CLKDET:
|
|
case PCM512x_AUTO_MUTE:
|
|
case PCM512x_DIGITAL_VOLUME_1:
|
|
case PCM512x_DIGITAL_VOLUME_2:
|
|
case PCM512x_DIGITAL_VOLUME_3:
|
|
case PCM512x_DIGITAL_MUTE_1:
|
|
case PCM512x_DIGITAL_MUTE_2:
|
|
case PCM512x_DIGITAL_MUTE_3:
|
|
case PCM512x_GPIO_OUTPUT_1:
|
|
case PCM512x_GPIO_OUTPUT_2:
|
|
case PCM512x_GPIO_OUTPUT_3:
|
|
case PCM512x_GPIO_OUTPUT_4:
|
|
case PCM512x_GPIO_OUTPUT_5:
|
|
case PCM512x_GPIO_OUTPUT_6:
|
|
case PCM512x_GPIO_CONTROL_1:
|
|
case PCM512x_GPIO_CONTROL_2:
|
|
case PCM512x_OVERFLOW:
|
|
case PCM512x_RATE_DET_1:
|
|
case PCM512x_RATE_DET_2:
|
|
case PCM512x_RATE_DET_3:
|
|
case PCM512x_RATE_DET_4:
|
|
case PCM512x_CLOCK_STATUS:
|
|
case PCM512x_ANALOG_MUTE_DET:
|
|
case PCM512x_GPIN:
|
|
case PCM512x_DIGITAL_MUTE_DET:
|
|
case PCM512x_OUTPUT_AMPLITUDE:
|
|
case PCM512x_ANALOG_GAIN_CTRL:
|
|
case PCM512x_UNDERVOLTAGE_PROT:
|
|
case PCM512x_ANALOG_MUTE_CTRL:
|
|
case PCM512x_ANALOG_GAIN_BOOST:
|
|
case PCM512x_VCOM_CTRL_1:
|
|
case PCM512x_VCOM_CTRL_2:
|
|
case PCM512x_CRAM_CTRL:
|
|
case PCM512x_FLEX_A:
|
|
case PCM512x_FLEX_B:
|
|
return true;
|
|
default:
|
|
/* There are 256 raw register addresses */
|
|
return reg < 0xff;
|
|
}
|
|
}
|
|
|
|
static bool pcm512x_volatile(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case PCM512x_PLL_EN:
|
|
case PCM512x_OVERFLOW:
|
|
case PCM512x_RATE_DET_1:
|
|
case PCM512x_RATE_DET_2:
|
|
case PCM512x_RATE_DET_3:
|
|
case PCM512x_RATE_DET_4:
|
|
case PCM512x_CLOCK_STATUS:
|
|
case PCM512x_ANALOG_MUTE_DET:
|
|
case PCM512x_GPIN:
|
|
case PCM512x_DIGITAL_MUTE_DET:
|
|
case PCM512x_CRAM_CTRL:
|
|
return true;
|
|
default:
|
|
/* There are 256 raw register addresses */
|
|
return reg < 0xff;
|
|
}
|
|
}
|
|
|
|
static int pcm512x_overclock_pll_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
|
|
ucontrol->value.integer.value[0] = pcm512x->overclock_pll;
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_overclock_pll_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (snd_soc_component_get_bias_level(component)) {
|
|
case SND_SOC_BIAS_OFF:
|
|
case SND_SOC_BIAS_STANDBY:
|
|
break;
|
|
default:
|
|
return -EBUSY;
|
|
}
|
|
|
|
pcm512x->overclock_pll = ucontrol->value.integer.value[0];
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_overclock_dsp_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
|
|
ucontrol->value.integer.value[0] = pcm512x->overclock_dsp;
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_overclock_dsp_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (snd_soc_component_get_bias_level(component)) {
|
|
case SND_SOC_BIAS_OFF:
|
|
case SND_SOC_BIAS_STANDBY:
|
|
break;
|
|
default:
|
|
return -EBUSY;
|
|
}
|
|
|
|
pcm512x->overclock_dsp = ucontrol->value.integer.value[0];
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_overclock_dac_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
|
|
ucontrol->value.integer.value[0] = pcm512x->overclock_dac;
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_overclock_dac_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (snd_soc_component_get_bias_level(component)) {
|
|
case SND_SOC_BIAS_OFF:
|
|
case SND_SOC_BIAS_STANDBY:
|
|
break;
|
|
default:
|
|
return -EBUSY;
|
|
}
|
|
|
|
pcm512x->overclock_dac = ucontrol->value.integer.value[0];
|
|
return 0;
|
|
}
|
|
|
|
static const DECLARE_TLV_DB_SCALE(digital_tlv, -10350, 50, 1);
|
|
static const DECLARE_TLV_DB_SCALE(analog_tlv, -600, 600, 0);
|
|
static const DECLARE_TLV_DB_SCALE(boost_tlv, 0, 80, 0);
|
|
|
|
static const char * const pcm512x_dsp_program_texts[] = {
|
|
"FIR interpolation with de-emphasis",
|
|
"Low latency IIR with de-emphasis",
|
|
"High attenuation with de-emphasis",
|
|
"Fixed process flow",
|
|
"Ringing-less low latency FIR",
|
|
};
|
|
|
|
static const unsigned int pcm512x_dsp_program_values[] = {
|
|
1,
|
|
2,
|
|
3,
|
|
5,
|
|
7,
|
|
};
|
|
|
|
static SOC_VALUE_ENUM_SINGLE_DECL(pcm512x_dsp_program,
|
|
PCM512x_DSP_PROGRAM, 0, 0x1f,
|
|
pcm512x_dsp_program_texts,
|
|
pcm512x_dsp_program_values);
|
|
|
|
static const char * const pcm512x_clk_missing_text[] = {
|
|
"1s", "2s", "3s", "4s", "5s", "6s", "7s", "8s"
|
|
};
|
|
|
|
static const struct soc_enum pcm512x_clk_missing =
|
|
SOC_ENUM_SINGLE(PCM512x_CLKDET, 0, 8, pcm512x_clk_missing_text);
|
|
|
|
static const char * const pcm512x_autom_text[] = {
|
|
"21ms", "106ms", "213ms", "533ms", "1.07s", "2.13s", "5.33s", "10.66s"
|
|
};
|
|
|
|
static const struct soc_enum pcm512x_autom_l =
|
|
SOC_ENUM_SINGLE(PCM512x_AUTO_MUTE, PCM512x_ATML_SHIFT, 8,
|
|
pcm512x_autom_text);
|
|
|
|
static const struct soc_enum pcm512x_autom_r =
|
|
SOC_ENUM_SINGLE(PCM512x_AUTO_MUTE, PCM512x_ATMR_SHIFT, 8,
|
|
pcm512x_autom_text);
|
|
|
|
static const char * const pcm512x_ramp_rate_text[] = {
|
|
"1 sample/update", "2 samples/update", "4 samples/update",
|
|
"Immediate"
|
|
};
|
|
|
|
static const struct soc_enum pcm512x_vndf =
|
|
SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_1, PCM512x_VNDF_SHIFT, 4,
|
|
pcm512x_ramp_rate_text);
|
|
|
|
static const struct soc_enum pcm512x_vnuf =
|
|
SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_1, PCM512x_VNUF_SHIFT, 4,
|
|
pcm512x_ramp_rate_text);
|
|
|
|
static const struct soc_enum pcm512x_vedf =
|
|
SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_2, PCM512x_VEDF_SHIFT, 4,
|
|
pcm512x_ramp_rate_text);
|
|
|
|
static const char * const pcm512x_ramp_step_text[] = {
|
|
"4dB/step", "2dB/step", "1dB/step", "0.5dB/step"
|
|
};
|
|
|
|
static const struct soc_enum pcm512x_vnds =
|
|
SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_1, PCM512x_VNDS_SHIFT, 4,
|
|
pcm512x_ramp_step_text);
|
|
|
|
static const struct soc_enum pcm512x_vnus =
|
|
SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_1, PCM512x_VNUS_SHIFT, 4,
|
|
pcm512x_ramp_step_text);
|
|
|
|
static const struct soc_enum pcm512x_veds =
|
|
SOC_ENUM_SINGLE(PCM512x_DIGITAL_MUTE_2, PCM512x_VEDS_SHIFT, 4,
|
|
pcm512x_ramp_step_text);
|
|
|
|
static int pcm512x_update_mute(struct pcm512x_priv *pcm512x)
|
|
{
|
|
return regmap_update_bits(
|
|
pcm512x->regmap, PCM512x_MUTE, PCM512x_RQML | PCM512x_RQMR,
|
|
(!!(pcm512x->mute & 0x5) << PCM512x_RQML_SHIFT)
|
|
| (!!(pcm512x->mute & 0x3) << PCM512x_RQMR_SHIFT));
|
|
}
|
|
|
|
static int pcm512x_digital_playback_switch_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
|
|
mutex_lock(&pcm512x->mutex);
|
|
ucontrol->value.integer.value[0] = !(pcm512x->mute & 0x4);
|
|
ucontrol->value.integer.value[1] = !(pcm512x->mute & 0x2);
|
|
mutex_unlock(&pcm512x->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_digital_playback_switch_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
int ret, changed = 0;
|
|
|
|
mutex_lock(&pcm512x->mutex);
|
|
|
|
if ((pcm512x->mute & 0x4) == (ucontrol->value.integer.value[0] << 2)) {
|
|
pcm512x->mute ^= 0x4;
|
|
changed = 1;
|
|
}
|
|
if ((pcm512x->mute & 0x2) == (ucontrol->value.integer.value[1] << 1)) {
|
|
pcm512x->mute ^= 0x2;
|
|
changed = 1;
|
|
}
|
|
|
|
if (changed) {
|
|
ret = pcm512x_update_mute(pcm512x);
|
|
if (ret != 0) {
|
|
dev_err(component->dev,
|
|
"Failed to update digital mute: %d\n", ret);
|
|
mutex_unlock(&pcm512x->mutex);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&pcm512x->mutex);
|
|
|
|
return changed;
|
|
}
|
|
|
|
static const struct snd_kcontrol_new pcm512x_controls[] = {
|
|
SOC_DOUBLE_R_TLV("Digital Playback Volume", PCM512x_DIGITAL_VOLUME_2,
|
|
PCM512x_DIGITAL_VOLUME_3, 0, 255, 1, digital_tlv),
|
|
SOC_DOUBLE_TLV("Analogue Playback Volume", PCM512x_ANALOG_GAIN_CTRL,
|
|
PCM512x_LAGN_SHIFT, PCM512x_RAGN_SHIFT, 1, 1, analog_tlv),
|
|
SOC_DOUBLE_TLV("Analogue Playback Boost Volume", PCM512x_ANALOG_GAIN_BOOST,
|
|
PCM512x_AGBL_SHIFT, PCM512x_AGBR_SHIFT, 1, 0, boost_tlv),
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "Digital Playback Switch",
|
|
.index = 0,
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
|
|
.info = snd_ctl_boolean_stereo_info,
|
|
.get = pcm512x_digital_playback_switch_get,
|
|
.put = pcm512x_digital_playback_switch_put
|
|
},
|
|
|
|
SOC_SINGLE("Deemphasis Switch", PCM512x_DSP, PCM512x_DEMP_SHIFT, 1, 1),
|
|
SOC_ENUM("DSP Program", pcm512x_dsp_program),
|
|
|
|
SOC_ENUM("Clock Missing Period", pcm512x_clk_missing),
|
|
SOC_ENUM("Auto Mute Time Left", pcm512x_autom_l),
|
|
SOC_ENUM("Auto Mute Time Right", pcm512x_autom_r),
|
|
SOC_SINGLE("Auto Mute Mono Switch", PCM512x_DIGITAL_MUTE_3,
|
|
PCM512x_ACTL_SHIFT, 1, 0),
|
|
SOC_DOUBLE("Auto Mute Switch", PCM512x_DIGITAL_MUTE_3, PCM512x_AMLE_SHIFT,
|
|
PCM512x_AMRE_SHIFT, 1, 0),
|
|
|
|
SOC_ENUM("Volume Ramp Down Rate", pcm512x_vndf),
|
|
SOC_ENUM("Volume Ramp Down Step", pcm512x_vnds),
|
|
SOC_ENUM("Volume Ramp Up Rate", pcm512x_vnuf),
|
|
SOC_ENUM("Volume Ramp Up Step", pcm512x_vnus),
|
|
SOC_ENUM("Volume Ramp Down Emergency Rate", pcm512x_vedf),
|
|
SOC_ENUM("Volume Ramp Down Emergency Step", pcm512x_veds),
|
|
|
|
SOC_SINGLE_EXT("Max Overclock PLL", SND_SOC_NOPM, 0, 20, 0,
|
|
pcm512x_overclock_pll_get, pcm512x_overclock_pll_put),
|
|
SOC_SINGLE_EXT("Max Overclock DSP", SND_SOC_NOPM, 0, 40, 0,
|
|
pcm512x_overclock_dsp_get, pcm512x_overclock_dsp_put),
|
|
SOC_SINGLE_EXT("Max Overclock DAC", SND_SOC_NOPM, 0, 40, 0,
|
|
pcm512x_overclock_dac_get, pcm512x_overclock_dac_put),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget pcm512x_dapm_widgets[] = {
|
|
SND_SOC_DAPM_DAC("DACL", NULL, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_DAC("DACR", NULL, SND_SOC_NOPM, 0, 0),
|
|
|
|
SND_SOC_DAPM_OUTPUT("OUTL"),
|
|
SND_SOC_DAPM_OUTPUT("OUTR"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route pcm512x_dapm_routes[] = {
|
|
{ "DACL", NULL, "Playback" },
|
|
{ "DACR", NULL, "Playback" },
|
|
|
|
{ "OUTL", NULL, "DACL" },
|
|
{ "OUTR", NULL, "DACR" },
|
|
};
|
|
|
|
static unsigned long pcm512x_pll_max(struct pcm512x_priv *pcm512x)
|
|
{
|
|
return 25000000 + 25000000 * pcm512x->overclock_pll / 100;
|
|
}
|
|
|
|
static unsigned long pcm512x_dsp_max(struct pcm512x_priv *pcm512x)
|
|
{
|
|
return 50000000 + 50000000 * pcm512x->overclock_dsp / 100;
|
|
}
|
|
|
|
static unsigned long pcm512x_dac_max(struct pcm512x_priv *pcm512x,
|
|
unsigned long rate)
|
|
{
|
|
return rate + rate * pcm512x->overclock_dac / 100;
|
|
}
|
|
|
|
static unsigned long pcm512x_sck_max(struct pcm512x_priv *pcm512x)
|
|
{
|
|
if (!pcm512x->pll_out)
|
|
return 25000000;
|
|
return pcm512x_pll_max(pcm512x);
|
|
}
|
|
|
|
static unsigned long pcm512x_ncp_target(struct pcm512x_priv *pcm512x,
|
|
unsigned long dac_rate)
|
|
{
|
|
/*
|
|
* If the DAC is not actually overclocked, use the good old
|
|
* NCP target rate...
|
|
*/
|
|
if (dac_rate <= 6144000)
|
|
return 1536000;
|
|
/*
|
|
* ...but if the DAC is in fact overclocked, bump the NCP target
|
|
* rate to get the recommended dividers even when overclocking.
|
|
*/
|
|
return pcm512x_dac_max(pcm512x, 1536000);
|
|
}
|
|
|
|
static const u32 pcm512x_dai_rates[] = {
|
|
8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000,
|
|
88200, 96000, 176400, 192000, 384000,
|
|
};
|
|
|
|
static const struct snd_pcm_hw_constraint_list constraints_slave = {
|
|
.count = ARRAY_SIZE(pcm512x_dai_rates),
|
|
.list = pcm512x_dai_rates,
|
|
};
|
|
|
|
static int pcm512x_hw_rule_rate(struct snd_pcm_hw_params *params,
|
|
struct snd_pcm_hw_rule *rule)
|
|
{
|
|
struct pcm512x_priv *pcm512x = rule->private;
|
|
struct snd_interval ranges[2];
|
|
int frame_size;
|
|
|
|
frame_size = snd_soc_params_to_frame_size(params);
|
|
if (frame_size < 0)
|
|
return frame_size;
|
|
|
|
switch (frame_size) {
|
|
case 32:
|
|
/* No hole when the frame size is 32. */
|
|
return 0;
|
|
case 48:
|
|
case 64:
|
|
/* There is only one hole in the range of supported
|
|
* rates, but it moves with the frame size.
|
|
*/
|
|
memset(ranges, 0, sizeof(ranges));
|
|
ranges[0].min = 8000;
|
|
ranges[0].max = pcm512x_sck_max(pcm512x) / frame_size / 2;
|
|
ranges[1].min = DIV_ROUND_UP(16000000, frame_size);
|
|
ranges[1].max = 384000;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return snd_interval_ranges(hw_param_interval(params, rule->var),
|
|
ARRAY_SIZE(ranges), ranges, 0);
|
|
}
|
|
|
|
static int pcm512x_dai_startup_master(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
struct device *dev = dai->dev;
|
|
struct snd_pcm_hw_constraint_ratnums *constraints_no_pll;
|
|
struct snd_ratnum *rats_no_pll;
|
|
|
|
if (IS_ERR(pcm512x->sclk)) {
|
|
dev_err(dev, "Need SCLK for master mode: %ld\n",
|
|
PTR_ERR(pcm512x->sclk));
|
|
return PTR_ERR(pcm512x->sclk);
|
|
}
|
|
|
|
if (pcm512x->pll_out)
|
|
return snd_pcm_hw_rule_add(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_RATE,
|
|
pcm512x_hw_rule_rate,
|
|
pcm512x,
|
|
SNDRV_PCM_HW_PARAM_FRAME_BITS,
|
|
SNDRV_PCM_HW_PARAM_CHANNELS, -1);
|
|
|
|
constraints_no_pll = devm_kzalloc(dev, sizeof(*constraints_no_pll),
|
|
GFP_KERNEL);
|
|
if (!constraints_no_pll)
|
|
return -ENOMEM;
|
|
constraints_no_pll->nrats = 1;
|
|
rats_no_pll = devm_kzalloc(dev, sizeof(*rats_no_pll), GFP_KERNEL);
|
|
if (!rats_no_pll)
|
|
return -ENOMEM;
|
|
constraints_no_pll->rats = rats_no_pll;
|
|
rats_no_pll->num = clk_get_rate(pcm512x->sclk) / 64;
|
|
rats_no_pll->den_min = 1;
|
|
rats_no_pll->den_max = 128;
|
|
rats_no_pll->den_step = 1;
|
|
|
|
return snd_pcm_hw_constraint_ratnums(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_RATE,
|
|
constraints_no_pll);
|
|
}
|
|
|
|
static int pcm512x_dai_startup_slave(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
struct device *dev = dai->dev;
|
|
struct regmap *regmap = pcm512x->regmap;
|
|
|
|
if (IS_ERR(pcm512x->sclk)) {
|
|
dev_info(dev, "No SCLK, using BCLK: %ld\n",
|
|
PTR_ERR(pcm512x->sclk));
|
|
|
|
/* Disable reporting of missing SCLK as an error */
|
|
regmap_update_bits(regmap, PCM512x_ERROR_DETECT,
|
|
PCM512x_IDCH, PCM512x_IDCH);
|
|
|
|
/* Switch PLL input to BCLK */
|
|
regmap_update_bits(regmap, PCM512x_PLL_REF,
|
|
PCM512x_SREF, PCM512x_SREF_BCK);
|
|
}
|
|
|
|
return snd_pcm_hw_constraint_list(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_RATE,
|
|
&constraints_slave);
|
|
}
|
|
|
|
static int pcm512x_dai_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (pcm512x->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
return pcm512x_dai_startup_master(substream, dai);
|
|
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
return pcm512x_dai_startup_slave(substream, dai);
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int pcm512x_set_bias_level(struct snd_soc_component *component,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct pcm512x_priv *pcm512x = dev_get_drvdata(component->dev);
|
|
int ret;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
case SND_SOC_BIAS_PREPARE:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_POWER,
|
|
PCM512x_RQST, 0);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to remove standby: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_POWER,
|
|
PCM512x_RQST, PCM512x_RQST);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to request standby: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long pcm512x_find_sck(struct snd_soc_dai *dai,
|
|
unsigned long bclk_rate)
|
|
{
|
|
struct device *dev = dai->dev;
|
|
struct snd_soc_component *component = dai->component;
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
unsigned long sck_rate;
|
|
int pow2;
|
|
|
|
/* 64 MHz <= pll_rate <= 100 MHz, VREF mode */
|
|
/* 16 MHz <= sck_rate <= 25 MHz, VREF mode */
|
|
|
|
/* select sck_rate as a multiple of bclk_rate but still with
|
|
* as many factors of 2 as possible, as that makes it easier
|
|
* to find a fast DAC rate
|
|
*/
|
|
pow2 = 1 << fls((pcm512x_pll_max(pcm512x) - 16000000) / bclk_rate);
|
|
for (; pow2; pow2 >>= 1) {
|
|
sck_rate = rounddown(pcm512x_pll_max(pcm512x),
|
|
bclk_rate * pow2);
|
|
if (sck_rate >= 16000000)
|
|
break;
|
|
}
|
|
if (!pow2) {
|
|
dev_err(dev, "Impossible to generate a suitable SCK\n");
|
|
return 0;
|
|
}
|
|
|
|
dev_dbg(dev, "sck_rate %lu\n", sck_rate);
|
|
return sck_rate;
|
|
}
|
|
|
|
/* pll_rate = pllin_rate * R * J.D / P
|
|
* 1 <= R <= 16
|
|
* 1 <= J <= 63
|
|
* 0 <= D <= 9999
|
|
* 1 <= P <= 15
|
|
* 64 MHz <= pll_rate <= 100 MHz
|
|
* if D == 0
|
|
* 1 MHz <= pllin_rate / P <= 20 MHz
|
|
* else if D > 0
|
|
* 6.667 MHz <= pllin_rate / P <= 20 MHz
|
|
* 4 <= J <= 11
|
|
* R = 1
|
|
*/
|
|
static int pcm512x_find_pll_coeff(struct snd_soc_dai *dai,
|
|
unsigned long pllin_rate,
|
|
unsigned long pll_rate)
|
|
{
|
|
struct device *dev = dai->dev;
|
|
struct snd_soc_component *component = dai->component;
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
unsigned long common;
|
|
int R, J, D, P;
|
|
unsigned long K; /* 10000 * J.D */
|
|
unsigned long num;
|
|
unsigned long den;
|
|
|
|
common = gcd(pll_rate, pllin_rate);
|
|
dev_dbg(dev, "pll %lu pllin %lu common %lu\n",
|
|
pll_rate, pllin_rate, common);
|
|
num = pll_rate / common;
|
|
den = pllin_rate / common;
|
|
|
|
/* pllin_rate / P (or here, den) cannot be greater than 20 MHz */
|
|
if (pllin_rate / den > 20000000 && num < 8) {
|
|
num *= DIV_ROUND_UP(pllin_rate / den, 20000000);
|
|
den *= DIV_ROUND_UP(pllin_rate / den, 20000000);
|
|
}
|
|
dev_dbg(dev, "num / den = %lu / %lu\n", num, den);
|
|
|
|
P = den;
|
|
if (den <= 15 && num <= 16 * 63
|
|
&& 1000000 <= pllin_rate / P && pllin_rate / P <= 20000000) {
|
|
/* Try the case with D = 0 */
|
|
D = 0;
|
|
/* factor 'num' into J and R, such that R <= 16 and J <= 63 */
|
|
for (R = 16; R; R--) {
|
|
if (num % R)
|
|
continue;
|
|
J = num / R;
|
|
if (J == 0 || J > 63)
|
|
continue;
|
|
|
|
dev_dbg(dev, "R * J / P = %d * %d / %d\n", R, J, P);
|
|
pcm512x->real_pll = pll_rate;
|
|
goto done;
|
|
}
|
|
/* no luck */
|
|
}
|
|
|
|
R = 1;
|
|
|
|
if (num > 0xffffffffUL / 10000)
|
|
goto fallback;
|
|
|
|
/* Try to find an exact pll_rate using the D > 0 case */
|
|
common = gcd(10000 * num, den);
|
|
num = 10000 * num / common;
|
|
den /= common;
|
|
dev_dbg(dev, "num %lu den %lu common %lu\n", num, den, common);
|
|
|
|
for (P = den; P <= 15; P++) {
|
|
if (pllin_rate / P < 6667000 || 200000000 < pllin_rate / P)
|
|
continue;
|
|
if (num * P % den)
|
|
continue;
|
|
K = num * P / den;
|
|
/* J == 12 is ok if D == 0 */
|
|
if (K < 40000 || K > 120000)
|
|
continue;
|
|
|
|
J = K / 10000;
|
|
D = K % 10000;
|
|
dev_dbg(dev, "J.D / P = %d.%04d / %d\n", J, D, P);
|
|
pcm512x->real_pll = pll_rate;
|
|
goto done;
|
|
}
|
|
|
|
/* Fall back to an approximate pll_rate */
|
|
|
|
fallback:
|
|
/* find smallest possible P */
|
|
P = DIV_ROUND_UP(pllin_rate, 20000000);
|
|
if (!P)
|
|
P = 1;
|
|
else if (P > 15) {
|
|
dev_err(dev, "Need a slower clock as pll-input\n");
|
|
return -EINVAL;
|
|
}
|
|
if (pllin_rate / P < 6667000) {
|
|
dev_err(dev, "Need a faster clock as pll-input\n");
|
|
return -EINVAL;
|
|
}
|
|
K = DIV_ROUND_CLOSEST_ULL(10000ULL * pll_rate * P, pllin_rate);
|
|
if (K < 40000)
|
|
K = 40000;
|
|
/* J == 12 is ok if D == 0 */
|
|
if (K > 120000)
|
|
K = 120000;
|
|
J = K / 10000;
|
|
D = K % 10000;
|
|
dev_dbg(dev, "J.D / P ~ %d.%04d / %d\n", J, D, P);
|
|
pcm512x->real_pll = DIV_ROUND_DOWN_ULL((u64)K * pllin_rate, 10000 * P);
|
|
|
|
done:
|
|
pcm512x->pll_r = R;
|
|
pcm512x->pll_j = J;
|
|
pcm512x->pll_d = D;
|
|
pcm512x->pll_p = P;
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long pcm512x_pllin_dac_rate(struct snd_soc_dai *dai,
|
|
unsigned long osr_rate,
|
|
unsigned long pllin_rate)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
unsigned long dac_rate;
|
|
|
|
if (!pcm512x->pll_out)
|
|
return 0; /* no PLL to bypass, force SCK as DAC input */
|
|
|
|
if (pllin_rate % osr_rate)
|
|
return 0; /* futile, quit early */
|
|
|
|
/* run DAC no faster than 6144000 Hz */
|
|
for (dac_rate = rounddown(pcm512x_dac_max(pcm512x, 6144000), osr_rate);
|
|
dac_rate;
|
|
dac_rate -= osr_rate) {
|
|
|
|
if (pllin_rate / dac_rate > 128)
|
|
return 0; /* DAC divider would be too big */
|
|
|
|
if (!(pllin_rate % dac_rate))
|
|
return dac_rate;
|
|
|
|
dac_rate -= osr_rate;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_set_dividers(struct snd_soc_dai *dai,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct device *dev = dai->dev;
|
|
struct snd_soc_component *component = dai->component;
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
unsigned long pllin_rate = 0;
|
|
unsigned long pll_rate;
|
|
unsigned long sck_rate;
|
|
unsigned long mck_rate;
|
|
unsigned long bclk_rate;
|
|
unsigned long sample_rate;
|
|
unsigned long osr_rate;
|
|
unsigned long dacsrc_rate;
|
|
int bclk_div;
|
|
int lrclk_div;
|
|
int dsp_div;
|
|
int dac_div;
|
|
unsigned long dac_rate;
|
|
int ncp_div;
|
|
int osr_div;
|
|
int ret;
|
|
int idac;
|
|
int fssp;
|
|
int gpio;
|
|
|
|
if (pcm512x->bclk_ratio > 0) {
|
|
lrclk_div = pcm512x->bclk_ratio;
|
|
} else {
|
|
lrclk_div = snd_soc_params_to_frame_size(params);
|
|
|
|
if (lrclk_div == 0) {
|
|
dev_err(dev, "No LRCLK?\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (!pcm512x->pll_out) {
|
|
sck_rate = clk_get_rate(pcm512x->sclk);
|
|
bclk_rate = params_rate(params) * lrclk_div;
|
|
bclk_div = DIV_ROUND_CLOSEST(sck_rate, bclk_rate);
|
|
|
|
mck_rate = sck_rate;
|
|
} else {
|
|
ret = snd_soc_params_to_bclk(params);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to find suitable BCLK: %d\n", ret);
|
|
return ret;
|
|
}
|
|
if (ret == 0) {
|
|
dev_err(dev, "No BCLK?\n");
|
|
return -EINVAL;
|
|
}
|
|
bclk_rate = ret;
|
|
|
|
pllin_rate = clk_get_rate(pcm512x->sclk);
|
|
|
|
sck_rate = pcm512x_find_sck(dai, bclk_rate);
|
|
if (!sck_rate)
|
|
return -EINVAL;
|
|
pll_rate = 4 * sck_rate;
|
|
|
|
ret = pcm512x_find_pll_coeff(dai, pllin_rate, pll_rate);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
ret = regmap_write(pcm512x->regmap,
|
|
PCM512x_PLL_COEFF_0, pcm512x->pll_p - 1);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write PLL P: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap,
|
|
PCM512x_PLL_COEFF_1, pcm512x->pll_j);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write PLL J: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap,
|
|
PCM512x_PLL_COEFF_2, pcm512x->pll_d >> 8);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write PLL D msb: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap,
|
|
PCM512x_PLL_COEFF_3, pcm512x->pll_d & 0xff);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write PLL D lsb: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap,
|
|
PCM512x_PLL_COEFF_4, pcm512x->pll_r - 1);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write PLL R: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
mck_rate = pcm512x->real_pll;
|
|
|
|
bclk_div = DIV_ROUND_CLOSEST(sck_rate, bclk_rate);
|
|
}
|
|
|
|
if (bclk_div > 128) {
|
|
dev_err(dev, "Failed to find BCLK divider\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* the actual rate */
|
|
sample_rate = sck_rate / bclk_div / lrclk_div;
|
|
osr_rate = 16 * sample_rate;
|
|
|
|
/* run DSP no faster than 50 MHz */
|
|
dsp_div = mck_rate > pcm512x_dsp_max(pcm512x) ? 2 : 1;
|
|
|
|
dac_rate = pcm512x_pllin_dac_rate(dai, osr_rate, pllin_rate);
|
|
if (dac_rate) {
|
|
/* the desired clock rate is "compatible" with the pll input
|
|
* clock, so use that clock as dac input instead of the pll
|
|
* output clock since the pll will introduce jitter and thus
|
|
* noise.
|
|
*/
|
|
dev_dbg(dev, "using pll input as dac input\n");
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_DAC_REF,
|
|
PCM512x_SDAC, PCM512x_SDAC_GPIO);
|
|
if (ret != 0) {
|
|
dev_err(component->dev,
|
|
"Failed to set gpio as dacref: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
gpio = PCM512x_GREF_GPIO1 + pcm512x->pll_in - 1;
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_GPIO_DACIN,
|
|
PCM512x_GREF, gpio);
|
|
if (ret != 0) {
|
|
dev_err(component->dev,
|
|
"Failed to set gpio %d as dacin: %d\n",
|
|
pcm512x->pll_in, ret);
|
|
return ret;
|
|
}
|
|
|
|
dacsrc_rate = pllin_rate;
|
|
} else {
|
|
/* run DAC no faster than 6144000 Hz */
|
|
unsigned long dac_mul = pcm512x_dac_max(pcm512x, 6144000)
|
|
/ osr_rate;
|
|
unsigned long sck_mul = sck_rate / osr_rate;
|
|
|
|
for (; dac_mul; dac_mul--) {
|
|
if (!(sck_mul % dac_mul))
|
|
break;
|
|
}
|
|
if (!dac_mul) {
|
|
dev_err(dev, "Failed to find DAC rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dac_rate = dac_mul * osr_rate;
|
|
dev_dbg(dev, "dac_rate %lu sample_rate %lu\n",
|
|
dac_rate, sample_rate);
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_DAC_REF,
|
|
PCM512x_SDAC, PCM512x_SDAC_SCK);
|
|
if (ret != 0) {
|
|
dev_err(component->dev,
|
|
"Failed to set sck as dacref: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dacsrc_rate = sck_rate;
|
|
}
|
|
|
|
osr_div = DIV_ROUND_CLOSEST(dac_rate, osr_rate);
|
|
if (osr_div > 128) {
|
|
dev_err(dev, "Failed to find OSR divider\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dac_div = DIV_ROUND_CLOSEST(dacsrc_rate, dac_rate);
|
|
if (dac_div > 128) {
|
|
dev_err(dev, "Failed to find DAC divider\n");
|
|
return -EINVAL;
|
|
}
|
|
dac_rate = dacsrc_rate / dac_div;
|
|
|
|
ncp_div = DIV_ROUND_CLOSEST(dac_rate,
|
|
pcm512x_ncp_target(pcm512x, dac_rate));
|
|
if (ncp_div > 128 || dac_rate / ncp_div > 2048000) {
|
|
/* run NCP no faster than 2048000 Hz, but why? */
|
|
ncp_div = DIV_ROUND_UP(dac_rate, 2048000);
|
|
if (ncp_div > 128) {
|
|
dev_err(dev, "Failed to find NCP divider\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
idac = mck_rate / (dsp_div * sample_rate);
|
|
|
|
ret = regmap_write(pcm512x->regmap, PCM512x_DSP_CLKDIV, dsp_div - 1);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write DSP divider: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap, PCM512x_DAC_CLKDIV, dac_div - 1);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write DAC divider: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap, PCM512x_NCP_CLKDIV, ncp_div - 1);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write NCP divider: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap, PCM512x_OSR_CLKDIV, osr_div - 1);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write OSR divider: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap,
|
|
PCM512x_MASTER_CLKDIV_1, bclk_div - 1);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write BCLK divider: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap,
|
|
PCM512x_MASTER_CLKDIV_2, lrclk_div - 1);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write LRCLK divider: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap, PCM512x_IDAC_1, idac >> 8);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write IDAC msb divider: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap, PCM512x_IDAC_2, idac & 0xff);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to write IDAC lsb divider: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (sample_rate <= pcm512x_dac_max(pcm512x, 48000))
|
|
fssp = PCM512x_FSSP_48KHZ;
|
|
else if (sample_rate <= pcm512x_dac_max(pcm512x, 96000))
|
|
fssp = PCM512x_FSSP_96KHZ;
|
|
else if (sample_rate <= pcm512x_dac_max(pcm512x, 192000))
|
|
fssp = PCM512x_FSSP_192KHZ;
|
|
else
|
|
fssp = PCM512x_FSSP_384KHZ;
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_FS_SPEED_MODE,
|
|
PCM512x_FSSP, fssp);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to set fs speed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(component->dev, "DSP divider %d\n", dsp_div);
|
|
dev_dbg(component->dev, "DAC divider %d\n", dac_div);
|
|
dev_dbg(component->dev, "NCP divider %d\n", ncp_div);
|
|
dev_dbg(component->dev, "OSR divider %d\n", osr_div);
|
|
dev_dbg(component->dev, "BCK divider %d\n", bclk_div);
|
|
dev_dbg(component->dev, "LRCK divider %d\n", lrclk_div);
|
|
dev_dbg(component->dev, "IDAC %d\n", idac);
|
|
dev_dbg(component->dev, "1<<FSSP %d\n", 1 << fssp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
int alen;
|
|
int gpio;
|
|
int ret;
|
|
|
|
dev_dbg(component->dev, "hw_params %u Hz, %u channels\n",
|
|
params_rate(params),
|
|
params_channels(params));
|
|
|
|
switch (params_width(params)) {
|
|
case 16:
|
|
alen = PCM512x_ALEN_16;
|
|
break;
|
|
case 20:
|
|
alen = PCM512x_ALEN_20;
|
|
break;
|
|
case 24:
|
|
alen = PCM512x_ALEN_24;
|
|
break;
|
|
case 32:
|
|
alen = PCM512x_ALEN_32;
|
|
break;
|
|
default:
|
|
dev_err(component->dev, "Bad frame size: %d\n",
|
|
params_width(params));
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_I2S_1,
|
|
PCM512x_ALEN, alen);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to set frame size: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if ((pcm512x->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
|
|
SND_SOC_DAIFMT_CBS_CFS) {
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_ERROR_DETECT,
|
|
PCM512x_DCAS, 0);
|
|
if (ret != 0) {
|
|
dev_err(component->dev,
|
|
"Failed to enable clock divider autoset: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
goto skip_pll;
|
|
}
|
|
|
|
if (pcm512x->pll_out) {
|
|
ret = regmap_write(pcm512x->regmap, PCM512x_FLEX_A, 0x11);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to set FLEX_A: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(pcm512x->regmap, PCM512x_FLEX_B, 0xff);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to set FLEX_B: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_ERROR_DETECT,
|
|
PCM512x_IDFS | PCM512x_IDBK
|
|
| PCM512x_IDSK | PCM512x_IDCH
|
|
| PCM512x_IDCM | PCM512x_DCAS
|
|
| PCM512x_IPLK,
|
|
PCM512x_IDFS | PCM512x_IDBK
|
|
| PCM512x_IDSK | PCM512x_IDCH
|
|
| PCM512x_DCAS);
|
|
if (ret != 0) {
|
|
dev_err(component->dev,
|
|
"Failed to ignore auto-clock failures: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
} else {
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_ERROR_DETECT,
|
|
PCM512x_IDFS | PCM512x_IDBK
|
|
| PCM512x_IDSK | PCM512x_IDCH
|
|
| PCM512x_IDCM | PCM512x_DCAS
|
|
| PCM512x_IPLK,
|
|
PCM512x_IDFS | PCM512x_IDBK
|
|
| PCM512x_IDSK | PCM512x_IDCH
|
|
| PCM512x_DCAS | PCM512x_IPLK);
|
|
if (ret != 0) {
|
|
dev_err(component->dev,
|
|
"Failed to ignore auto-clock failures: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_PLL_EN,
|
|
PCM512x_PLLE, 0);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to disable pll: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = pcm512x_set_dividers(dai, params);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
if (pcm512x->pll_out) {
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_PLL_REF,
|
|
PCM512x_SREF, PCM512x_SREF_GPIO);
|
|
if (ret != 0) {
|
|
dev_err(component->dev,
|
|
"Failed to set gpio as pllref: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
gpio = PCM512x_GREF_GPIO1 + pcm512x->pll_in - 1;
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_GPIO_PLLIN,
|
|
PCM512x_GREF, gpio);
|
|
if (ret != 0) {
|
|
dev_err(component->dev,
|
|
"Failed to set gpio %d as pllin: %d\n",
|
|
pcm512x->pll_in, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_PLL_EN,
|
|
PCM512x_PLLE, PCM512x_PLLE);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to enable pll: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
gpio = PCM512x_G1OE << (pcm512x->pll_out - 1);
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_GPIO_EN,
|
|
gpio, gpio);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to enable gpio %d: %d\n",
|
|
pcm512x->pll_out, ret);
|
|
return ret;
|
|
}
|
|
|
|
gpio = PCM512x_GPIO_OUTPUT_1 + pcm512x->pll_out - 1;
|
|
ret = regmap_update_bits(pcm512x->regmap, gpio,
|
|
PCM512x_GxSL, PCM512x_GxSL_PLLCK);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to output pll on %d: %d\n",
|
|
ret, pcm512x->pll_out);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_SYNCHRONIZE,
|
|
PCM512x_RQSY, PCM512x_RQSY_HALT);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to halt clocks: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_SYNCHRONIZE,
|
|
PCM512x_RQSY, PCM512x_RQSY_RESUME);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to resume clocks: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
skip_pll:
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
int afmt;
|
|
int offset = 0;
|
|
int clock_output;
|
|
int master_mode;
|
|
int ret;
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
clock_output = 0;
|
|
master_mode = 0;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
clock_output = PCM512x_BCKO | PCM512x_LRKO;
|
|
master_mode = PCM512x_RLRK | PCM512x_RBCK;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
clock_output = PCM512x_BCKO;
|
|
master_mode = PCM512x_RBCK;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_BCLK_LRCLK_CFG,
|
|
PCM512x_BCKP | PCM512x_BCKO | PCM512x_LRKO,
|
|
clock_output);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to enable clock output: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_MASTER_MODE,
|
|
PCM512x_RLRK | PCM512x_RBCK,
|
|
master_mode);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to enable master mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
afmt = PCM512x_AFMT_I2S;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
afmt = PCM512x_AFMT_RTJ;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
afmt = PCM512x_AFMT_LTJ;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
offset = 1;
|
|
fallthrough;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
afmt = PCM512x_AFMT_DSP;
|
|
break;
|
|
default:
|
|
dev_err(component->dev, "unsupported DAI format: 0x%x\n",
|
|
pcm512x->fmt);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_I2S_1,
|
|
PCM512x_AFMT, afmt);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to set data format: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_I2S_2,
|
|
0xFF, offset);
|
|
if (ret != 0) {
|
|
dev_err(component->dev, "Failed to set data offset: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pcm512x->fmt = fmt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
|
|
if (ratio > 256)
|
|
return -EINVAL;
|
|
|
|
pcm512x->bclk_ratio = ratio;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_mute(struct snd_soc_dai *dai, int mute, int direction)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
|
|
int ret;
|
|
unsigned int mute_det;
|
|
|
|
mutex_lock(&pcm512x->mutex);
|
|
|
|
if (mute) {
|
|
pcm512x->mute |= 0x1;
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_MUTE,
|
|
PCM512x_RQML | PCM512x_RQMR,
|
|
PCM512x_RQML | PCM512x_RQMR);
|
|
if (ret != 0) {
|
|
dev_err(component->dev,
|
|
"Failed to set digital mute: %d\n", ret);
|
|
goto unlock;
|
|
}
|
|
|
|
regmap_read_poll_timeout(pcm512x->regmap,
|
|
PCM512x_ANALOG_MUTE_DET,
|
|
mute_det, (mute_det & 0x3) == 0,
|
|
200, 10000);
|
|
} else {
|
|
pcm512x->mute &= ~0x1;
|
|
ret = pcm512x_update_mute(pcm512x);
|
|
if (ret != 0) {
|
|
dev_err(component->dev,
|
|
"Failed to update digital mute: %d\n", ret);
|
|
goto unlock;
|
|
}
|
|
|
|
regmap_read_poll_timeout(pcm512x->regmap,
|
|
PCM512x_ANALOG_MUTE_DET,
|
|
mute_det,
|
|
(mute_det & 0x3)
|
|
== ((~pcm512x->mute >> 1) & 0x3),
|
|
200, 10000);
|
|
}
|
|
|
|
unlock:
|
|
mutex_unlock(&pcm512x->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops pcm512x_dai_ops = {
|
|
.startup = pcm512x_dai_startup,
|
|
.hw_params = pcm512x_hw_params,
|
|
.set_fmt = pcm512x_set_fmt,
|
|
.mute_stream = pcm512x_mute,
|
|
.set_bclk_ratio = pcm512x_set_bclk_ratio,
|
|
.no_capture_mute = 1,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver pcm512x_dai = {
|
|
.name = "pcm512x-hifi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_CONTINUOUS,
|
|
.rate_min = 8000,
|
|
.rate_max = 384000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE |
|
|
SNDRV_PCM_FMTBIT_S24_LE |
|
|
SNDRV_PCM_FMTBIT_S32_LE
|
|
},
|
|
.ops = &pcm512x_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver pcm512x_component_driver = {
|
|
.set_bias_level = pcm512x_set_bias_level,
|
|
.controls = pcm512x_controls,
|
|
.num_controls = ARRAY_SIZE(pcm512x_controls),
|
|
.dapm_widgets = pcm512x_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(pcm512x_dapm_widgets),
|
|
.dapm_routes = pcm512x_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(pcm512x_dapm_routes),
|
|
.use_pmdown_time = 1,
|
|
.endianness = 1,
|
|
.non_legacy_dai_naming = 1,
|
|
};
|
|
|
|
static const struct regmap_range_cfg pcm512x_range = {
|
|
.name = "Pages", .range_min = PCM512x_VIRT_BASE,
|
|
.range_max = PCM512x_MAX_REGISTER,
|
|
.selector_reg = PCM512x_PAGE,
|
|
.selector_mask = 0xff,
|
|
.window_start = 0, .window_len = 0x100,
|
|
};
|
|
|
|
const struct regmap_config pcm512x_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.readable_reg = pcm512x_readable,
|
|
.volatile_reg = pcm512x_volatile,
|
|
|
|
.ranges = &pcm512x_range,
|
|
.num_ranges = 1,
|
|
|
|
.max_register = PCM512x_MAX_REGISTER,
|
|
.reg_defaults = pcm512x_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(pcm512x_reg_defaults),
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
EXPORT_SYMBOL_GPL(pcm512x_regmap);
|
|
|
|
int pcm512x_probe(struct device *dev, struct regmap *regmap)
|
|
{
|
|
struct pcm512x_priv *pcm512x;
|
|
int i, ret;
|
|
|
|
pcm512x = devm_kzalloc(dev, sizeof(struct pcm512x_priv), GFP_KERNEL);
|
|
if (!pcm512x)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&pcm512x->mutex);
|
|
|
|
dev_set_drvdata(dev, pcm512x);
|
|
pcm512x->regmap = regmap;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pcm512x->supplies); i++)
|
|
pcm512x->supplies[i].supply = pcm512x_supply_names[i];
|
|
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pcm512x->supplies),
|
|
pcm512x->supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to get supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pcm512x->supply_nb[0].notifier_call = pcm512x_regulator_event_0;
|
|
pcm512x->supply_nb[1].notifier_call = pcm512x_regulator_event_1;
|
|
pcm512x->supply_nb[2].notifier_call = pcm512x_regulator_event_2;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pcm512x->supplies); i++) {
|
|
ret = devm_regulator_register_notifier(
|
|
pcm512x->supplies[i].consumer,
|
|
&pcm512x->supply_nb[i]);
|
|
if (ret != 0) {
|
|
dev_err(dev,
|
|
"Failed to register regulator notifier: %d\n",
|
|
ret);
|
|
}
|
|
}
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(pcm512x->supplies),
|
|
pcm512x->supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Reset the device, verifying I/O in the process for I2C */
|
|
ret = regmap_write(regmap, PCM512x_RESET,
|
|
PCM512x_RSTM | PCM512x_RSTR);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to reset device: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_write(regmap, PCM512x_RESET, 0);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to reset device: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
pcm512x->sclk = devm_clk_get(dev, NULL);
|
|
if (PTR_ERR(pcm512x->sclk) == -EPROBE_DEFER) {
|
|
ret = -EPROBE_DEFER;
|
|
goto err;
|
|
}
|
|
if (!IS_ERR(pcm512x->sclk)) {
|
|
ret = clk_prepare_enable(pcm512x->sclk);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable SCLK: %d\n", ret);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
/* Default to standby mode */
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_POWER,
|
|
PCM512x_RQST, PCM512x_RQST);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to request standby: %d\n",
|
|
ret);
|
|
goto err_clk;
|
|
}
|
|
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_idle(dev);
|
|
|
|
#ifdef CONFIG_OF
|
|
if (dev->of_node) {
|
|
const struct device_node *np = dev->of_node;
|
|
u32 val;
|
|
|
|
if (of_property_read_u32(np, "pll-in", &val) >= 0) {
|
|
if (val > 6) {
|
|
dev_err(dev, "Invalid pll-in\n");
|
|
ret = -EINVAL;
|
|
goto err_clk;
|
|
}
|
|
pcm512x->pll_in = val;
|
|
}
|
|
|
|
if (of_property_read_u32(np, "pll-out", &val) >= 0) {
|
|
if (val > 6) {
|
|
dev_err(dev, "Invalid pll-out\n");
|
|
ret = -EINVAL;
|
|
goto err_clk;
|
|
}
|
|
pcm512x->pll_out = val;
|
|
}
|
|
|
|
if (!pcm512x->pll_in != !pcm512x->pll_out) {
|
|
dev_err(dev,
|
|
"Error: both pll-in and pll-out, or none\n");
|
|
ret = -EINVAL;
|
|
goto err_clk;
|
|
}
|
|
if (pcm512x->pll_in && pcm512x->pll_in == pcm512x->pll_out) {
|
|
dev_err(dev, "Error: pll-in == pll-out\n");
|
|
ret = -EINVAL;
|
|
goto err_clk;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
ret = devm_snd_soc_register_component(dev, &pcm512x_component_driver,
|
|
&pcm512x_dai, 1);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to register CODEC: %d\n", ret);
|
|
goto err_pm;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_pm:
|
|
pm_runtime_disable(dev);
|
|
err_clk:
|
|
if (!IS_ERR(pcm512x->sclk))
|
|
clk_disable_unprepare(pcm512x->sclk);
|
|
err:
|
|
regulator_bulk_disable(ARRAY_SIZE(pcm512x->supplies),
|
|
pcm512x->supplies);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pcm512x_probe);
|
|
|
|
void pcm512x_remove(struct device *dev)
|
|
{
|
|
struct pcm512x_priv *pcm512x = dev_get_drvdata(dev);
|
|
|
|
pm_runtime_disable(dev);
|
|
if (!IS_ERR(pcm512x->sclk))
|
|
clk_disable_unprepare(pcm512x->sclk);
|
|
regulator_bulk_disable(ARRAY_SIZE(pcm512x->supplies),
|
|
pcm512x->supplies);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pcm512x_remove);
|
|
|
|
#ifdef CONFIG_PM
|
|
static int pcm512x_suspend(struct device *dev)
|
|
{
|
|
struct pcm512x_priv *pcm512x = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_POWER,
|
|
PCM512x_RQPD, PCM512x_RQPD);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to request power down: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(pcm512x->supplies),
|
|
pcm512x->supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to disable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (!IS_ERR(pcm512x->sclk))
|
|
clk_disable_unprepare(pcm512x->sclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcm512x_resume(struct device *dev)
|
|
{
|
|
struct pcm512x_priv *pcm512x = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
if (!IS_ERR(pcm512x->sclk)) {
|
|
ret = clk_prepare_enable(pcm512x->sclk);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable SCLK: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(pcm512x->supplies),
|
|
pcm512x->supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
regcache_cache_only(pcm512x->regmap, false);
|
|
ret = regcache_sync(pcm512x->regmap);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to sync cache: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_update_bits(pcm512x->regmap, PCM512x_POWER,
|
|
PCM512x_RQPD, 0);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to remove power down: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
const struct dev_pm_ops pcm512x_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(pcm512x_suspend, pcm512x_resume, NULL)
|
|
};
|
|
EXPORT_SYMBOL_GPL(pcm512x_pm_ops);
|
|
|
|
MODULE_DESCRIPTION("ASoC PCM512x codec driver");
|
|
MODULE_AUTHOR("Mark Brown <broonie@kernel.org>");
|
|
MODULE_LICENSE("GPL v2");
|