mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 11:34:50 +08:00
000255b7df
Originally OMAP MPUIO GPIO irqchip was implemented using Generic irq chip, but after set of reworks Generic irq chip code was replaced by common OMAP GPIO implementation and finally removed by commitd2d05c65c4
("gpio: omap: Fix regression for MPUIO interrupts"). Unfortunately, above commit left .irq_mask/unmask callbacks assigned as below for MPUIO GPIO case: irqc->irq_mask = irq_gc_mask_set_bit; irqc->irq_unmask = irq_gc_mask_clr_bit; This now causes boot failure on OMAP1 platforms, after commit450fa54cfd
("gpio: omap: convert to use generic irq handler") which forces these callbacks to be called during GPIO IRQs mapping from gpiochip_irq_map: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 75 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0-rc1-e3-los_afe0c+-00002-g25379c0-dirty #1 Hardware name: Amstrad E3 (Delta) task: c1836000 ti: c1838000 task.ti: c1838000 PC is at irq_gc_mask_set_bit+0x1c/0x60 LR is at __irq_do_set_handler+0x118/0x15c pc : [<c004848c>] lr : [<c0047d4c>] psr: 600000d3 sp : c1839c90 ip : c1862c64 fp : c1839c9c r10: 00000000 r9 : c0411950 r8 : c0411bbc r7 : 00000000 r6 : c185c310 r5 : c00444e8 r4 : c185c300 r3 : c1854b50 r2 : 00000000 r1 : 00000000 r0 : c185c310 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 0000317f Table: 10004000 DAC: 00000057 Process swapper (pid: 1, stack limit = 0xc1838190) Stack: (0xc1839c90 to 0xc183a000) [...] Backtrace: [<c0048470>] (irq_gc_mask_set_bit) from [<c0047d4c>] (__irq_do_set_handler+0x118/0x15c) [<c0047c34>] (__irq_do_set_handler) from [<c0047dd4>] (__irq_set_handler+0x44/0x5c) r6:00000000 r5:c00444e8 r4:c185c300 [<c0047d90>] (__irq_set_handler) from [<c0047e1c>] (irq_set_chip_and_handler_name+0x30/0x34) r7:00000050 r6:00000000 r5:c00444e8 r4:00000050 [<c0047dec>] (irq_set_chip_and_handler_name) from [<c01b345c>] (gpiochip_irq_map+0x3c/0x8c) r7:00000050 r6:00000000 r5:00000050 r4:c1862c64 [<c01b3420>] (gpiochip_irq_map) from [<c0049670>] (irq_domain_associate+0x7c/0x1c4) r5:c185c310 r4:c185cb00 [<c00495f4>] (irq_domain_associate) from [<c0049894>] (irq_domain_add_simple+0x98/0xc0) r8:c0411bbc r7:c185cb00 r6:00000050 r5:00000010 r4:00000001 [<c00497fc>] (irq_domain_add_simple) from [<c01b3328>] (_gpiochip_irqchip_add+0x64/0x10c) r7:c1862c64 r6:c0419280 r5:c1862c64 r4:c1854b50 [<c01b32c4>] (_gpiochip_irqchip_add) from [<c01b79f4>] (omap_gpio_probe+0x2fc/0x63c) r5:c1854b50 r4:c1862c10 [<c01b76f8>] (omap_gpio_probe) from [<c01fcf58>] (platform_drv_probe+0x2c/0x64) r10:00000000 r9:c03e45e8 r8:00000000 r7:c0419294 r6:c0411984 r5:c0419294 r4:c0411950 [<c01fcf2c>] (platform_drv_probe) from [<c01fb668>] (really_probe+0x160/0x29c) Hence, fix it by remove obsolete callbacks assignment. After this change omap_gpio_mask_irq()/omap_gpio_unmask_irq() will be used for MPUIO IRQs masking, but this now happens anyway from omap_gpio_irq_startup/shutdown(). Cc: Tony Lindgren <tony@atomide.com> Fixes: commitd2d05c65c4
("gpio: omap: Fix regression for MPUIO interrupts") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1683 lines
44 KiB
C
1683 lines
44 KiB
C
/*
|
|
* Support functions for OMAP GPIO
|
|
*
|
|
* Copyright (C) 2003-2005 Nokia Corporation
|
|
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments
|
|
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/syscore_ops.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/platform_data/gpio-omap.h>
|
|
|
|
#define OFF_MODE 1
|
|
#define OMAP4_GPIO_DEBOUNCINGTIME_MASK 0xFF
|
|
|
|
static LIST_HEAD(omap_gpio_list);
|
|
|
|
struct gpio_regs {
|
|
u32 irqenable1;
|
|
u32 irqenable2;
|
|
u32 wake_en;
|
|
u32 ctrl;
|
|
u32 oe;
|
|
u32 leveldetect0;
|
|
u32 leveldetect1;
|
|
u32 risingdetect;
|
|
u32 fallingdetect;
|
|
u32 dataout;
|
|
u32 debounce;
|
|
u32 debounce_en;
|
|
};
|
|
|
|
struct gpio_bank {
|
|
struct list_head node;
|
|
void __iomem *base;
|
|
int irq;
|
|
u32 non_wakeup_gpios;
|
|
u32 enabled_non_wakeup_gpios;
|
|
struct gpio_regs context;
|
|
u32 saved_datain;
|
|
u32 level_mask;
|
|
u32 toggle_mask;
|
|
raw_spinlock_t lock;
|
|
raw_spinlock_t wa_lock;
|
|
struct gpio_chip chip;
|
|
struct clk *dbck;
|
|
u32 mod_usage;
|
|
u32 irq_usage;
|
|
u32 dbck_enable_mask;
|
|
bool dbck_enabled;
|
|
struct device *dev;
|
|
bool is_mpuio;
|
|
bool dbck_flag;
|
|
bool loses_context;
|
|
bool context_valid;
|
|
int stride;
|
|
u32 width;
|
|
int context_loss_count;
|
|
int power_mode;
|
|
bool workaround_enabled;
|
|
|
|
void (*set_dataout)(struct gpio_bank *bank, unsigned gpio, int enable);
|
|
int (*get_context_loss_count)(struct device *dev);
|
|
|
|
struct omap_gpio_reg_offs *regs;
|
|
};
|
|
|
|
#define GPIO_MOD_CTRL_BIT BIT(0)
|
|
|
|
#define BANK_USED(bank) (bank->mod_usage || bank->irq_usage)
|
|
#define LINE_USED(line, offset) (line & (BIT(offset)))
|
|
|
|
static void omap_gpio_unmask_irq(struct irq_data *d);
|
|
|
|
static inline struct gpio_bank *omap_irq_data_get_bank(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
|
|
return container_of(chip, struct gpio_bank, chip);
|
|
}
|
|
|
|
static void omap_set_gpio_direction(struct gpio_bank *bank, int gpio,
|
|
int is_input)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 l;
|
|
|
|
reg += bank->regs->direction;
|
|
l = readl_relaxed(reg);
|
|
if (is_input)
|
|
l |= BIT(gpio);
|
|
else
|
|
l &= ~(BIT(gpio));
|
|
writel_relaxed(l, reg);
|
|
bank->context.oe = l;
|
|
}
|
|
|
|
|
|
/* set data out value using dedicate set/clear register */
|
|
static void omap_set_gpio_dataout_reg(struct gpio_bank *bank, unsigned offset,
|
|
int enable)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 l = BIT(offset);
|
|
|
|
if (enable) {
|
|
reg += bank->regs->set_dataout;
|
|
bank->context.dataout |= l;
|
|
} else {
|
|
reg += bank->regs->clr_dataout;
|
|
bank->context.dataout &= ~l;
|
|
}
|
|
|
|
writel_relaxed(l, reg);
|
|
}
|
|
|
|
/* set data out value using mask register */
|
|
static void omap_set_gpio_dataout_mask(struct gpio_bank *bank, unsigned offset,
|
|
int enable)
|
|
{
|
|
void __iomem *reg = bank->base + bank->regs->dataout;
|
|
u32 gpio_bit = BIT(offset);
|
|
u32 l;
|
|
|
|
l = readl_relaxed(reg);
|
|
if (enable)
|
|
l |= gpio_bit;
|
|
else
|
|
l &= ~gpio_bit;
|
|
writel_relaxed(l, reg);
|
|
bank->context.dataout = l;
|
|
}
|
|
|
|
static int omap_get_gpio_datain(struct gpio_bank *bank, int offset)
|
|
{
|
|
void __iomem *reg = bank->base + bank->regs->datain;
|
|
|
|
return (readl_relaxed(reg) & (BIT(offset))) != 0;
|
|
}
|
|
|
|
static int omap_get_gpio_dataout(struct gpio_bank *bank, int offset)
|
|
{
|
|
void __iomem *reg = bank->base + bank->regs->dataout;
|
|
|
|
return (readl_relaxed(reg) & (BIT(offset))) != 0;
|
|
}
|
|
|
|
static inline void omap_gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
|
|
{
|
|
int l = readl_relaxed(base + reg);
|
|
|
|
if (set)
|
|
l |= mask;
|
|
else
|
|
l &= ~mask;
|
|
|
|
writel_relaxed(l, base + reg);
|
|
}
|
|
|
|
static inline void omap_gpio_dbck_enable(struct gpio_bank *bank)
|
|
{
|
|
if (bank->dbck_enable_mask && !bank->dbck_enabled) {
|
|
clk_enable(bank->dbck);
|
|
bank->dbck_enabled = true;
|
|
|
|
writel_relaxed(bank->dbck_enable_mask,
|
|
bank->base + bank->regs->debounce_en);
|
|
}
|
|
}
|
|
|
|
static inline void omap_gpio_dbck_disable(struct gpio_bank *bank)
|
|
{
|
|
if (bank->dbck_enable_mask && bank->dbck_enabled) {
|
|
/*
|
|
* Disable debounce before cutting it's clock. If debounce is
|
|
* enabled but the clock is not, GPIO module seems to be unable
|
|
* to detect events and generate interrupts at least on OMAP3.
|
|
*/
|
|
writel_relaxed(0, bank->base + bank->regs->debounce_en);
|
|
|
|
clk_disable(bank->dbck);
|
|
bank->dbck_enabled = false;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* omap2_set_gpio_debounce - low level gpio debounce time
|
|
* @bank: the gpio bank we're acting upon
|
|
* @offset: the gpio number on this @bank
|
|
* @debounce: debounce time to use
|
|
*
|
|
* OMAP's debounce time is in 31us steps
|
|
* <debounce time> = (GPIO_DEBOUNCINGTIME[7:0].DEBOUNCETIME + 1) x 31
|
|
* so we need to convert and round up to the closest unit.
|
|
*/
|
|
static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
|
|
unsigned debounce)
|
|
{
|
|
void __iomem *reg;
|
|
u32 val;
|
|
u32 l;
|
|
bool enable = !!debounce;
|
|
|
|
if (!bank->dbck_flag)
|
|
return;
|
|
|
|
if (enable) {
|
|
debounce = DIV_ROUND_UP(debounce, 31) - 1;
|
|
debounce &= OMAP4_GPIO_DEBOUNCINGTIME_MASK;
|
|
}
|
|
|
|
l = BIT(offset);
|
|
|
|
clk_enable(bank->dbck);
|
|
reg = bank->base + bank->regs->debounce;
|
|
writel_relaxed(debounce, reg);
|
|
|
|
reg = bank->base + bank->regs->debounce_en;
|
|
val = readl_relaxed(reg);
|
|
|
|
if (enable)
|
|
val |= l;
|
|
else
|
|
val &= ~l;
|
|
bank->dbck_enable_mask = val;
|
|
|
|
writel_relaxed(val, reg);
|
|
clk_disable(bank->dbck);
|
|
/*
|
|
* Enable debounce clock per module.
|
|
* This call is mandatory because in omap_gpio_request() when
|
|
* *_runtime_get_sync() is called, _gpio_dbck_enable() within
|
|
* runtime callbck fails to turn on dbck because dbck_enable_mask
|
|
* used within _gpio_dbck_enable() is still not initialized at
|
|
* that point. Therefore we have to enable dbck here.
|
|
*/
|
|
omap_gpio_dbck_enable(bank);
|
|
if (bank->dbck_enable_mask) {
|
|
bank->context.debounce = debounce;
|
|
bank->context.debounce_en = val;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* omap_clear_gpio_debounce - clear debounce settings for a gpio
|
|
* @bank: the gpio bank we're acting upon
|
|
* @offset: the gpio number on this @bank
|
|
*
|
|
* If a gpio is using debounce, then clear the debounce enable bit and if
|
|
* this is the only gpio in this bank using debounce, then clear the debounce
|
|
* time too. The debounce clock will also be disabled when calling this function
|
|
* if this is the only gpio in the bank using debounce.
|
|
*/
|
|
static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset)
|
|
{
|
|
u32 gpio_bit = BIT(offset);
|
|
|
|
if (!bank->dbck_flag)
|
|
return;
|
|
|
|
if (!(bank->dbck_enable_mask & gpio_bit))
|
|
return;
|
|
|
|
bank->dbck_enable_mask &= ~gpio_bit;
|
|
bank->context.debounce_en &= ~gpio_bit;
|
|
writel_relaxed(bank->context.debounce_en,
|
|
bank->base + bank->regs->debounce_en);
|
|
|
|
if (!bank->dbck_enable_mask) {
|
|
bank->context.debounce = 0;
|
|
writel_relaxed(bank->context.debounce, bank->base +
|
|
bank->regs->debounce);
|
|
clk_disable(bank->dbck);
|
|
bank->dbck_enabled = false;
|
|
}
|
|
}
|
|
|
|
static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
|
|
unsigned trigger)
|
|
{
|
|
void __iomem *base = bank->base;
|
|
u32 gpio_bit = BIT(gpio);
|
|
|
|
omap_gpio_rmw(base, bank->regs->leveldetect0, gpio_bit,
|
|
trigger & IRQ_TYPE_LEVEL_LOW);
|
|
omap_gpio_rmw(base, bank->regs->leveldetect1, gpio_bit,
|
|
trigger & IRQ_TYPE_LEVEL_HIGH);
|
|
omap_gpio_rmw(base, bank->regs->risingdetect, gpio_bit,
|
|
trigger & IRQ_TYPE_EDGE_RISING);
|
|
omap_gpio_rmw(base, bank->regs->fallingdetect, gpio_bit,
|
|
trigger & IRQ_TYPE_EDGE_FALLING);
|
|
|
|
bank->context.leveldetect0 =
|
|
readl_relaxed(bank->base + bank->regs->leveldetect0);
|
|
bank->context.leveldetect1 =
|
|
readl_relaxed(bank->base + bank->regs->leveldetect1);
|
|
bank->context.risingdetect =
|
|
readl_relaxed(bank->base + bank->regs->risingdetect);
|
|
bank->context.fallingdetect =
|
|
readl_relaxed(bank->base + bank->regs->fallingdetect);
|
|
|
|
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
|
|
omap_gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0);
|
|
bank->context.wake_en =
|
|
readl_relaxed(bank->base + bank->regs->wkup_en);
|
|
}
|
|
|
|
/* This part needs to be executed always for OMAP{34xx, 44xx} */
|
|
if (!bank->regs->irqctrl) {
|
|
/* On omap24xx proceed only when valid GPIO bit is set */
|
|
if (bank->non_wakeup_gpios) {
|
|
if (!(bank->non_wakeup_gpios & gpio_bit))
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* Log the edge gpio and manually trigger the IRQ
|
|
* after resume if the input level changes
|
|
* to avoid irq lost during PER RET/OFF mode
|
|
* Applies for omap2 non-wakeup gpio and all omap3 gpios
|
|
*/
|
|
if (trigger & IRQ_TYPE_EDGE_BOTH)
|
|
bank->enabled_non_wakeup_gpios |= gpio_bit;
|
|
else
|
|
bank->enabled_non_wakeup_gpios &= ~gpio_bit;
|
|
}
|
|
|
|
exit:
|
|
bank->level_mask =
|
|
readl_relaxed(bank->base + bank->regs->leveldetect0) |
|
|
readl_relaxed(bank->base + bank->regs->leveldetect1);
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
/*
|
|
* This only applies to chips that can't do both rising and falling edge
|
|
* detection at once. For all other chips, this function is a noop.
|
|
*/
|
|
static void omap_toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 l = 0;
|
|
|
|
if (!bank->regs->irqctrl)
|
|
return;
|
|
|
|
reg += bank->regs->irqctrl;
|
|
|
|
l = readl_relaxed(reg);
|
|
if ((l >> gpio) & 1)
|
|
l &= ~(BIT(gpio));
|
|
else
|
|
l |= BIT(gpio);
|
|
|
|
writel_relaxed(l, reg);
|
|
}
|
|
#else
|
|
static void omap_toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {}
|
|
#endif
|
|
|
|
static int omap_set_gpio_triggering(struct gpio_bank *bank, int gpio,
|
|
unsigned trigger)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
void __iomem *base = bank->base;
|
|
u32 l = 0;
|
|
|
|
if (bank->regs->leveldetect0 && bank->regs->wkup_en) {
|
|
omap_set_gpio_trigger(bank, gpio, trigger);
|
|
} else if (bank->regs->irqctrl) {
|
|
reg += bank->regs->irqctrl;
|
|
|
|
l = readl_relaxed(reg);
|
|
if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
|
|
bank->toggle_mask |= BIT(gpio);
|
|
if (trigger & IRQ_TYPE_EDGE_RISING)
|
|
l |= BIT(gpio);
|
|
else if (trigger & IRQ_TYPE_EDGE_FALLING)
|
|
l &= ~(BIT(gpio));
|
|
else
|
|
return -EINVAL;
|
|
|
|
writel_relaxed(l, reg);
|
|
} else if (bank->regs->edgectrl1) {
|
|
if (gpio & 0x08)
|
|
reg += bank->regs->edgectrl2;
|
|
else
|
|
reg += bank->regs->edgectrl1;
|
|
|
|
gpio &= 0x07;
|
|
l = readl_relaxed(reg);
|
|
l &= ~(3 << (gpio << 1));
|
|
if (trigger & IRQ_TYPE_EDGE_RISING)
|
|
l |= 2 << (gpio << 1);
|
|
if (trigger & IRQ_TYPE_EDGE_FALLING)
|
|
l |= BIT(gpio << 1);
|
|
|
|
/* Enable wake-up during idle for dynamic tick */
|
|
omap_gpio_rmw(base, bank->regs->wkup_en, BIT(gpio), trigger);
|
|
bank->context.wake_en =
|
|
readl_relaxed(bank->base + bank->regs->wkup_en);
|
|
writel_relaxed(l, reg);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void omap_enable_gpio_module(struct gpio_bank *bank, unsigned offset)
|
|
{
|
|
if (bank->regs->pinctrl) {
|
|
void __iomem *reg = bank->base + bank->regs->pinctrl;
|
|
|
|
/* Claim the pin for MPU */
|
|
writel_relaxed(readl_relaxed(reg) | (BIT(offset)), reg);
|
|
}
|
|
|
|
if (bank->regs->ctrl && !BANK_USED(bank)) {
|
|
void __iomem *reg = bank->base + bank->regs->ctrl;
|
|
u32 ctrl;
|
|
|
|
ctrl = readl_relaxed(reg);
|
|
/* Module is enabled, clocks are not gated */
|
|
ctrl &= ~GPIO_MOD_CTRL_BIT;
|
|
writel_relaxed(ctrl, reg);
|
|
bank->context.ctrl = ctrl;
|
|
}
|
|
}
|
|
|
|
static void omap_disable_gpio_module(struct gpio_bank *bank, unsigned offset)
|
|
{
|
|
void __iomem *base = bank->base;
|
|
|
|
if (bank->regs->wkup_en &&
|
|
!LINE_USED(bank->mod_usage, offset) &&
|
|
!LINE_USED(bank->irq_usage, offset)) {
|
|
/* Disable wake-up during idle for dynamic tick */
|
|
omap_gpio_rmw(base, bank->regs->wkup_en, BIT(offset), 0);
|
|
bank->context.wake_en =
|
|
readl_relaxed(bank->base + bank->regs->wkup_en);
|
|
}
|
|
|
|
if (bank->regs->ctrl && !BANK_USED(bank)) {
|
|
void __iomem *reg = bank->base + bank->regs->ctrl;
|
|
u32 ctrl;
|
|
|
|
ctrl = readl_relaxed(reg);
|
|
/* Module is disabled, clocks are gated */
|
|
ctrl |= GPIO_MOD_CTRL_BIT;
|
|
writel_relaxed(ctrl, reg);
|
|
bank->context.ctrl = ctrl;
|
|
}
|
|
}
|
|
|
|
static int omap_gpio_is_input(struct gpio_bank *bank, unsigned offset)
|
|
{
|
|
void __iomem *reg = bank->base + bank->regs->direction;
|
|
|
|
return readl_relaxed(reg) & BIT(offset);
|
|
}
|
|
|
|
static void omap_gpio_init_irq(struct gpio_bank *bank, unsigned offset)
|
|
{
|
|
if (!LINE_USED(bank->mod_usage, offset)) {
|
|
omap_enable_gpio_module(bank, offset);
|
|
omap_set_gpio_direction(bank, offset, 1);
|
|
}
|
|
bank->irq_usage |= BIT(offset);
|
|
}
|
|
|
|
static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
|
|
{
|
|
struct gpio_bank *bank = omap_irq_data_get_bank(d);
|
|
int retval;
|
|
unsigned long flags;
|
|
unsigned offset = d->hwirq;
|
|
|
|
if (type & ~IRQ_TYPE_SENSE_MASK)
|
|
return -EINVAL;
|
|
|
|
if (!bank->regs->leveldetect0 &&
|
|
(type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
|
|
return -EINVAL;
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
retval = omap_set_gpio_triggering(bank, offset, type);
|
|
if (retval) {
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
goto error;
|
|
}
|
|
omap_gpio_init_irq(bank, offset);
|
|
if (!omap_gpio_is_input(bank, offset)) {
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
retval = -EINVAL;
|
|
goto error;
|
|
}
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
|
|
return 0;
|
|
|
|
error:
|
|
return retval;
|
|
}
|
|
|
|
static void omap_clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
|
|
reg += bank->regs->irqstatus;
|
|
writel_relaxed(gpio_mask, reg);
|
|
|
|
/* Workaround for clearing DSP GPIO interrupts to allow retention */
|
|
if (bank->regs->irqstatus2) {
|
|
reg = bank->base + bank->regs->irqstatus2;
|
|
writel_relaxed(gpio_mask, reg);
|
|
}
|
|
|
|
/* Flush posted write for the irq status to avoid spurious interrupts */
|
|
readl_relaxed(reg);
|
|
}
|
|
|
|
static inline void omap_clear_gpio_irqstatus(struct gpio_bank *bank,
|
|
unsigned offset)
|
|
{
|
|
omap_clear_gpio_irqbank(bank, BIT(offset));
|
|
}
|
|
|
|
static u32 omap_get_gpio_irqbank_mask(struct gpio_bank *bank)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 l;
|
|
u32 mask = (BIT(bank->width)) - 1;
|
|
|
|
reg += bank->regs->irqenable;
|
|
l = readl_relaxed(reg);
|
|
if (bank->regs->irqenable_inv)
|
|
l = ~l;
|
|
l &= mask;
|
|
return l;
|
|
}
|
|
|
|
static void omap_enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 l;
|
|
|
|
if (bank->regs->set_irqenable) {
|
|
reg += bank->regs->set_irqenable;
|
|
l = gpio_mask;
|
|
bank->context.irqenable1 |= gpio_mask;
|
|
} else {
|
|
reg += bank->regs->irqenable;
|
|
l = readl_relaxed(reg);
|
|
if (bank->regs->irqenable_inv)
|
|
l &= ~gpio_mask;
|
|
else
|
|
l |= gpio_mask;
|
|
bank->context.irqenable1 = l;
|
|
}
|
|
|
|
writel_relaxed(l, reg);
|
|
}
|
|
|
|
static void omap_disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 l;
|
|
|
|
if (bank->regs->clr_irqenable) {
|
|
reg += bank->regs->clr_irqenable;
|
|
l = gpio_mask;
|
|
bank->context.irqenable1 &= ~gpio_mask;
|
|
} else {
|
|
reg += bank->regs->irqenable;
|
|
l = readl_relaxed(reg);
|
|
if (bank->regs->irqenable_inv)
|
|
l |= gpio_mask;
|
|
else
|
|
l &= ~gpio_mask;
|
|
bank->context.irqenable1 = l;
|
|
}
|
|
|
|
writel_relaxed(l, reg);
|
|
}
|
|
|
|
static inline void omap_set_gpio_irqenable(struct gpio_bank *bank,
|
|
unsigned offset, int enable)
|
|
{
|
|
if (enable)
|
|
omap_enable_gpio_irqbank(bank, BIT(offset));
|
|
else
|
|
omap_disable_gpio_irqbank(bank, BIT(offset));
|
|
}
|
|
|
|
/*
|
|
* Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
|
|
* 1510 does not seem to have a wake-up register. If JTAG is connected
|
|
* to the target, system will wake up always on GPIO events. While
|
|
* system is running all registered GPIO interrupts need to have wake-up
|
|
* enabled. When system is suspended, only selected GPIO interrupts need
|
|
* to have wake-up enabled.
|
|
*/
|
|
static int omap_set_gpio_wakeup(struct gpio_bank *bank, unsigned offset,
|
|
int enable)
|
|
{
|
|
u32 gpio_bit = BIT(offset);
|
|
unsigned long flags;
|
|
|
|
if (bank->non_wakeup_gpios & gpio_bit) {
|
|
dev_err(bank->dev,
|
|
"Unable to modify wakeup on non-wakeup GPIO%d\n",
|
|
offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
if (enable)
|
|
bank->context.wake_en |= gpio_bit;
|
|
else
|
|
bank->context.wake_en &= ~gpio_bit;
|
|
|
|
writel_relaxed(bank->context.wake_en, bank->base + bank->regs->wkup_en);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
|
|
static int omap_gpio_wake_enable(struct irq_data *d, unsigned int enable)
|
|
{
|
|
struct gpio_bank *bank = omap_irq_data_get_bank(d);
|
|
unsigned offset = d->hwirq;
|
|
int ret;
|
|
|
|
ret = omap_set_gpio_wakeup(bank, offset, enable);
|
|
if (!ret)
|
|
ret = irq_set_irq_wake(bank->irq, enable);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* If this is the first gpio_request for the bank,
|
|
* enable the bank module.
|
|
*/
|
|
if (!BANK_USED(bank))
|
|
pm_runtime_get_sync(bank->dev);
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
omap_enable_gpio_module(bank, offset);
|
|
bank->mod_usage |= BIT(offset);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
bank->mod_usage &= ~(BIT(offset));
|
|
if (!LINE_USED(bank->irq_usage, offset)) {
|
|
omap_set_gpio_direction(bank, offset, 1);
|
|
omap_clear_gpio_debounce(bank, offset);
|
|
}
|
|
omap_disable_gpio_module(bank, offset);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
/*
|
|
* If this is the last gpio to be freed in the bank,
|
|
* disable the bank module.
|
|
*/
|
|
if (!BANK_USED(bank))
|
|
pm_runtime_put(bank->dev);
|
|
}
|
|
|
|
/*
|
|
* We need to unmask the GPIO bank interrupt as soon as possible to
|
|
* avoid missing GPIO interrupts for other lines in the bank.
|
|
* Then we need to mask-read-clear-unmask the triggered GPIO lines
|
|
* in the bank to avoid missing nested interrupts for a GPIO line.
|
|
* If we wait to unmask individual GPIO lines in the bank after the
|
|
* line's interrupt handler has been run, we may miss some nested
|
|
* interrupts.
|
|
*/
|
|
static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank)
|
|
{
|
|
void __iomem *isr_reg = NULL;
|
|
u32 isr;
|
|
unsigned int bit;
|
|
struct gpio_bank *bank = gpiobank;
|
|
unsigned long wa_lock_flags;
|
|
unsigned long lock_flags;
|
|
|
|
isr_reg = bank->base + bank->regs->irqstatus;
|
|
if (WARN_ON(!isr_reg))
|
|
goto exit;
|
|
|
|
pm_runtime_get_sync(bank->dev);
|
|
|
|
while (1) {
|
|
u32 isr_saved, level_mask = 0;
|
|
u32 enabled;
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, lock_flags);
|
|
|
|
enabled = omap_get_gpio_irqbank_mask(bank);
|
|
isr_saved = isr = readl_relaxed(isr_reg) & enabled;
|
|
|
|
if (bank->level_mask)
|
|
level_mask = bank->level_mask & enabled;
|
|
|
|
/* clear edge sensitive interrupts before handler(s) are
|
|
called so that we don't miss any interrupt occurred while
|
|
executing them */
|
|
omap_disable_gpio_irqbank(bank, isr_saved & ~level_mask);
|
|
omap_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
|
|
omap_enable_gpio_irqbank(bank, isr_saved & ~level_mask);
|
|
|
|
raw_spin_unlock_irqrestore(&bank->lock, lock_flags);
|
|
|
|
if (!isr)
|
|
break;
|
|
|
|
while (isr) {
|
|
bit = __ffs(isr);
|
|
isr &= ~(BIT(bit));
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, lock_flags);
|
|
/*
|
|
* Some chips can't respond to both rising and falling
|
|
* at the same time. If this irq was requested with
|
|
* both flags, we need to flip the ICR data for the IRQ
|
|
* to respond to the IRQ for the opposite direction.
|
|
* This will be indicated in the bank toggle_mask.
|
|
*/
|
|
if (bank->toggle_mask & (BIT(bit)))
|
|
omap_toggle_gpio_edge_triggering(bank, bit);
|
|
|
|
raw_spin_unlock_irqrestore(&bank->lock, lock_flags);
|
|
|
|
raw_spin_lock_irqsave(&bank->wa_lock, wa_lock_flags);
|
|
|
|
generic_handle_irq(irq_find_mapping(bank->chip.irqdomain,
|
|
bit));
|
|
|
|
raw_spin_unlock_irqrestore(&bank->wa_lock,
|
|
wa_lock_flags);
|
|
}
|
|
}
|
|
exit:
|
|
pm_runtime_put(bank->dev);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static unsigned int omap_gpio_irq_startup(struct irq_data *d)
|
|
{
|
|
struct gpio_bank *bank = omap_irq_data_get_bank(d);
|
|
unsigned long flags;
|
|
unsigned offset = d->hwirq;
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
|
|
if (!LINE_USED(bank->mod_usage, offset))
|
|
omap_set_gpio_direction(bank, offset, 1);
|
|
else if (!omap_gpio_is_input(bank, offset))
|
|
goto err;
|
|
omap_enable_gpio_module(bank, offset);
|
|
bank->irq_usage |= BIT(offset);
|
|
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
omap_gpio_unmask_irq(d);
|
|
|
|
return 0;
|
|
err:
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void omap_gpio_irq_shutdown(struct irq_data *d)
|
|
{
|
|
struct gpio_bank *bank = omap_irq_data_get_bank(d);
|
|
unsigned long flags;
|
|
unsigned offset = d->hwirq;
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
bank->irq_usage &= ~(BIT(offset));
|
|
omap_set_gpio_irqenable(bank, offset, 0);
|
|
omap_clear_gpio_irqstatus(bank, offset);
|
|
omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
|
|
if (!LINE_USED(bank->mod_usage, offset))
|
|
omap_clear_gpio_debounce(bank, offset);
|
|
omap_disable_gpio_module(bank, offset);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
}
|
|
|
|
static void omap_gpio_irq_bus_lock(struct irq_data *data)
|
|
{
|
|
struct gpio_bank *bank = omap_irq_data_get_bank(data);
|
|
|
|
if (!BANK_USED(bank))
|
|
pm_runtime_get_sync(bank->dev);
|
|
}
|
|
|
|
static void gpio_irq_bus_sync_unlock(struct irq_data *data)
|
|
{
|
|
struct gpio_bank *bank = omap_irq_data_get_bank(data);
|
|
|
|
/*
|
|
* If this is the last IRQ to be freed in the bank,
|
|
* disable the bank module.
|
|
*/
|
|
if (!BANK_USED(bank))
|
|
pm_runtime_put(bank->dev);
|
|
}
|
|
|
|
static void omap_gpio_ack_irq(struct irq_data *d)
|
|
{
|
|
struct gpio_bank *bank = omap_irq_data_get_bank(d);
|
|
unsigned offset = d->hwirq;
|
|
|
|
omap_clear_gpio_irqstatus(bank, offset);
|
|
}
|
|
|
|
static void omap_gpio_mask_irq(struct irq_data *d)
|
|
{
|
|
struct gpio_bank *bank = omap_irq_data_get_bank(d);
|
|
unsigned offset = d->hwirq;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
omap_set_gpio_irqenable(bank, offset, 0);
|
|
omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
}
|
|
|
|
static void omap_gpio_unmask_irq(struct irq_data *d)
|
|
{
|
|
struct gpio_bank *bank = omap_irq_data_get_bank(d);
|
|
unsigned offset = d->hwirq;
|
|
u32 trigger = irqd_get_trigger_type(d);
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
if (trigger)
|
|
omap_set_gpio_triggering(bank, offset, trigger);
|
|
|
|
/* For level-triggered GPIOs, the clearing must be done after
|
|
* the HW source is cleared, thus after the handler has run */
|
|
if (bank->level_mask & BIT(offset)) {
|
|
omap_set_gpio_irqenable(bank, offset, 0);
|
|
omap_clear_gpio_irqstatus(bank, offset);
|
|
}
|
|
|
|
omap_set_gpio_irqenable(bank, offset, 1);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
|
|
static int omap_mpuio_suspend_noirq(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct gpio_bank *bank = platform_get_drvdata(pdev);
|
|
void __iomem *mask_reg = bank->base +
|
|
OMAP_MPUIO_GPIO_MASKIT / bank->stride;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
writel_relaxed(0xffff & ~bank->context.wake_en, mask_reg);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_mpuio_resume_noirq(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct gpio_bank *bank = platform_get_drvdata(pdev);
|
|
void __iomem *mask_reg = bank->base +
|
|
OMAP_MPUIO_GPIO_MASKIT / bank->stride;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
writel_relaxed(bank->context.wake_en, mask_reg);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
|
|
.suspend_noirq = omap_mpuio_suspend_noirq,
|
|
.resume_noirq = omap_mpuio_resume_noirq,
|
|
};
|
|
|
|
/* use platform_driver for this. */
|
|
static struct platform_driver omap_mpuio_driver = {
|
|
.driver = {
|
|
.name = "mpuio",
|
|
.pm = &omap_mpuio_dev_pm_ops,
|
|
},
|
|
};
|
|
|
|
static struct platform_device omap_mpuio_device = {
|
|
.name = "mpuio",
|
|
.id = -1,
|
|
.dev = {
|
|
.driver = &omap_mpuio_driver.driver,
|
|
}
|
|
/* could list the /proc/iomem resources */
|
|
};
|
|
|
|
static inline void omap_mpuio_init(struct gpio_bank *bank)
|
|
{
|
|
platform_set_drvdata(&omap_mpuio_device, bank);
|
|
|
|
if (platform_driver_register(&omap_mpuio_driver) == 0)
|
|
(void) platform_device_register(&omap_mpuio_device);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
|
|
static int omap_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct gpio_bank *bank;
|
|
unsigned long flags;
|
|
void __iomem *reg;
|
|
int dir;
|
|
|
|
bank = container_of(chip, struct gpio_bank, chip);
|
|
reg = bank->base + bank->regs->direction;
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
dir = !!(readl_relaxed(reg) & BIT(offset));
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
return dir;
|
|
}
|
|
|
|
static int omap_gpio_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct gpio_bank *bank;
|
|
unsigned long flags;
|
|
|
|
bank = container_of(chip, struct gpio_bank, chip);
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
omap_set_gpio_direction(bank, offset, 1);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int omap_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct gpio_bank *bank;
|
|
|
|
bank = container_of(chip, struct gpio_bank, chip);
|
|
|
|
if (omap_gpio_is_input(bank, offset))
|
|
return omap_get_gpio_datain(bank, offset);
|
|
else
|
|
return omap_get_gpio_dataout(bank, offset);
|
|
}
|
|
|
|
static int omap_gpio_output(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct gpio_bank *bank;
|
|
unsigned long flags;
|
|
|
|
bank = container_of(chip, struct gpio_bank, chip);
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
bank->set_dataout(bank, offset, value);
|
|
omap_set_gpio_direction(bank, offset, 0);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int omap_gpio_debounce(struct gpio_chip *chip, unsigned offset,
|
|
unsigned debounce)
|
|
{
|
|
struct gpio_bank *bank;
|
|
unsigned long flags;
|
|
|
|
bank = container_of(chip, struct gpio_bank, chip);
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
omap2_set_gpio_debounce(bank, offset, debounce);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void omap_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct gpio_bank *bank;
|
|
unsigned long flags;
|
|
|
|
bank = container_of(chip, struct gpio_bank, chip);
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
bank->set_dataout(bank, offset, value);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
|
|
static void __init omap_gpio_show_rev(struct gpio_bank *bank)
|
|
{
|
|
static bool called;
|
|
u32 rev;
|
|
|
|
if (called || bank->regs->revision == USHRT_MAX)
|
|
return;
|
|
|
|
rev = readw_relaxed(bank->base + bank->regs->revision);
|
|
pr_info("OMAP GPIO hardware version %d.%d\n",
|
|
(rev >> 4) & 0x0f, rev & 0x0f);
|
|
|
|
called = true;
|
|
}
|
|
|
|
static void omap_gpio_mod_init(struct gpio_bank *bank)
|
|
{
|
|
void __iomem *base = bank->base;
|
|
u32 l = 0xffffffff;
|
|
|
|
if (bank->width == 16)
|
|
l = 0xffff;
|
|
|
|
if (bank->is_mpuio) {
|
|
writel_relaxed(l, bank->base + bank->regs->irqenable);
|
|
return;
|
|
}
|
|
|
|
omap_gpio_rmw(base, bank->regs->irqenable, l,
|
|
bank->regs->irqenable_inv);
|
|
omap_gpio_rmw(base, bank->regs->irqstatus, l,
|
|
!bank->regs->irqenable_inv);
|
|
if (bank->regs->debounce_en)
|
|
writel_relaxed(0, base + bank->regs->debounce_en);
|
|
|
|
/* Save OE default value (0xffffffff) in the context */
|
|
bank->context.oe = readl_relaxed(bank->base + bank->regs->direction);
|
|
/* Initialize interface clk ungated, module enabled */
|
|
if (bank->regs->ctrl)
|
|
writel_relaxed(0, base + bank->regs->ctrl);
|
|
}
|
|
|
|
static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
|
|
{
|
|
static int gpio;
|
|
int irq_base = 0;
|
|
int ret;
|
|
|
|
/*
|
|
* REVISIT eventually switch from OMAP-specific gpio structs
|
|
* over to the generic ones
|
|
*/
|
|
bank->chip.request = omap_gpio_request;
|
|
bank->chip.free = omap_gpio_free;
|
|
bank->chip.get_direction = omap_gpio_get_direction;
|
|
bank->chip.direction_input = omap_gpio_input;
|
|
bank->chip.get = omap_gpio_get;
|
|
bank->chip.direction_output = omap_gpio_output;
|
|
bank->chip.set_debounce = omap_gpio_debounce;
|
|
bank->chip.set = omap_gpio_set;
|
|
if (bank->is_mpuio) {
|
|
bank->chip.label = "mpuio";
|
|
if (bank->regs->wkup_en)
|
|
bank->chip.dev = &omap_mpuio_device.dev;
|
|
bank->chip.base = OMAP_MPUIO(0);
|
|
} else {
|
|
bank->chip.label = "gpio";
|
|
bank->chip.base = gpio;
|
|
}
|
|
bank->chip.ngpio = bank->width;
|
|
|
|
ret = gpiochip_add(&bank->chip);
|
|
if (ret) {
|
|
dev_err(bank->dev, "Could not register gpio chip %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (!bank->is_mpuio)
|
|
gpio += bank->width;
|
|
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
/*
|
|
* REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
|
|
* irq_alloc_descs() since a base IRQ offset will no longer be needed.
|
|
*/
|
|
irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
|
|
if (irq_base < 0) {
|
|
dev_err(bank->dev, "Couldn't allocate IRQ numbers\n");
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
/* MPUIO is a bit different, reading IRQ status clears it */
|
|
if (bank->is_mpuio) {
|
|
irqc->irq_ack = dummy_irq_chip.irq_ack;
|
|
if (!bank->regs->wkup_en)
|
|
irqc->irq_set_wake = NULL;
|
|
}
|
|
|
|
ret = gpiochip_irqchip_add(&bank->chip, irqc,
|
|
irq_base, handle_bad_irq,
|
|
IRQ_TYPE_NONE);
|
|
|
|
if (ret) {
|
|
dev_err(bank->dev, "Couldn't add irqchip to gpiochip %d\n", ret);
|
|
gpiochip_remove(&bank->chip);
|
|
return -ENODEV;
|
|
}
|
|
|
|
gpiochip_set_chained_irqchip(&bank->chip, irqc, bank->irq, NULL);
|
|
|
|
ret = devm_request_irq(bank->dev, bank->irq, omap_gpio_irq_handler,
|
|
0, dev_name(bank->dev), bank);
|
|
if (ret)
|
|
gpiochip_remove(&bank->chip);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id omap_gpio_match[];
|
|
|
|
static int omap_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
const struct of_device_id *match;
|
|
const struct omap_gpio_platform_data *pdata;
|
|
struct resource *res;
|
|
struct gpio_bank *bank;
|
|
struct irq_chip *irqc;
|
|
int ret;
|
|
|
|
match = of_match_device(of_match_ptr(omap_gpio_match), dev);
|
|
|
|
pdata = match ? match->data : dev_get_platdata(dev);
|
|
if (!pdata)
|
|
return -EINVAL;
|
|
|
|
bank = devm_kzalloc(dev, sizeof(struct gpio_bank), GFP_KERNEL);
|
|
if (!bank) {
|
|
dev_err(dev, "Memory alloc failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
irqc = devm_kzalloc(dev, sizeof(*irqc), GFP_KERNEL);
|
|
if (!irqc)
|
|
return -ENOMEM;
|
|
|
|
irqc->irq_startup = omap_gpio_irq_startup,
|
|
irqc->irq_shutdown = omap_gpio_irq_shutdown,
|
|
irqc->irq_ack = omap_gpio_ack_irq,
|
|
irqc->irq_mask = omap_gpio_mask_irq,
|
|
irqc->irq_unmask = omap_gpio_unmask_irq,
|
|
irqc->irq_set_type = omap_gpio_irq_type,
|
|
irqc->irq_set_wake = omap_gpio_wake_enable,
|
|
irqc->irq_bus_lock = omap_gpio_irq_bus_lock,
|
|
irqc->irq_bus_sync_unlock = gpio_irq_bus_sync_unlock,
|
|
irqc->name = dev_name(&pdev->dev);
|
|
|
|
bank->irq = platform_get_irq(pdev, 0);
|
|
if (bank->irq <= 0) {
|
|
if (!bank->irq)
|
|
bank->irq = -ENXIO;
|
|
if (bank->irq != -EPROBE_DEFER)
|
|
dev_err(dev,
|
|
"can't get irq resource ret=%d\n", bank->irq);
|
|
return bank->irq;
|
|
}
|
|
|
|
bank->dev = dev;
|
|
bank->chip.dev = dev;
|
|
bank->chip.owner = THIS_MODULE;
|
|
bank->dbck_flag = pdata->dbck_flag;
|
|
bank->stride = pdata->bank_stride;
|
|
bank->width = pdata->bank_width;
|
|
bank->is_mpuio = pdata->is_mpuio;
|
|
bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
|
|
bank->regs = pdata->regs;
|
|
#ifdef CONFIG_OF_GPIO
|
|
bank->chip.of_node = of_node_get(node);
|
|
#endif
|
|
if (node) {
|
|
if (!of_property_read_bool(node, "ti,gpio-always-on"))
|
|
bank->loses_context = true;
|
|
} else {
|
|
bank->loses_context = pdata->loses_context;
|
|
|
|
if (bank->loses_context)
|
|
bank->get_context_loss_count =
|
|
pdata->get_context_loss_count;
|
|
}
|
|
|
|
if (bank->regs->set_dataout && bank->regs->clr_dataout)
|
|
bank->set_dataout = omap_set_gpio_dataout_reg;
|
|
else
|
|
bank->set_dataout = omap_set_gpio_dataout_mask;
|
|
|
|
raw_spin_lock_init(&bank->lock);
|
|
raw_spin_lock_init(&bank->wa_lock);
|
|
|
|
/* Static mapping, never released */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
bank->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(bank->base)) {
|
|
return PTR_ERR(bank->base);
|
|
}
|
|
|
|
if (bank->dbck_flag) {
|
|
bank->dbck = devm_clk_get(bank->dev, "dbclk");
|
|
if (IS_ERR(bank->dbck)) {
|
|
dev_err(bank->dev,
|
|
"Could not get gpio dbck. Disable debounce\n");
|
|
bank->dbck_flag = false;
|
|
} else {
|
|
clk_prepare(bank->dbck);
|
|
}
|
|
}
|
|
|
|
platform_set_drvdata(pdev, bank);
|
|
|
|
pm_runtime_enable(bank->dev);
|
|
pm_runtime_irq_safe(bank->dev);
|
|
pm_runtime_get_sync(bank->dev);
|
|
|
|
if (bank->is_mpuio)
|
|
omap_mpuio_init(bank);
|
|
|
|
omap_gpio_mod_init(bank);
|
|
|
|
ret = omap_gpio_chip_init(bank, irqc);
|
|
if (ret) {
|
|
pm_runtime_put_sync(bank->dev);
|
|
pm_runtime_disable(bank->dev);
|
|
return ret;
|
|
}
|
|
|
|
omap_gpio_show_rev(bank);
|
|
|
|
pm_runtime_put(bank->dev);
|
|
|
|
list_add_tail(&bank->node, &omap_gpio_list);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct gpio_bank *bank = platform_get_drvdata(pdev);
|
|
|
|
list_del(&bank->node);
|
|
gpiochip_remove(&bank->chip);
|
|
pm_runtime_disable(bank->dev);
|
|
if (bank->dbck_flag)
|
|
clk_unprepare(bank->dbck);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_OMAP2PLUS
|
|
|
|
#if defined(CONFIG_PM)
|
|
static void omap_gpio_restore_context(struct gpio_bank *bank);
|
|
|
|
static int omap_gpio_runtime_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct gpio_bank *bank = platform_get_drvdata(pdev);
|
|
u32 l1 = 0, l2 = 0;
|
|
unsigned long flags;
|
|
u32 wake_low, wake_hi;
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
|
|
/*
|
|
* Only edges can generate a wakeup event to the PRCM.
|
|
*
|
|
* Therefore, ensure any wake-up capable GPIOs have
|
|
* edge-detection enabled before going idle to ensure a wakeup
|
|
* to the PRCM is generated on a GPIO transition. (c.f. 34xx
|
|
* NDA TRM 25.5.3.1)
|
|
*
|
|
* The normal values will be restored upon ->runtime_resume()
|
|
* by writing back the values saved in bank->context.
|
|
*/
|
|
wake_low = bank->context.leveldetect0 & bank->context.wake_en;
|
|
if (wake_low)
|
|
writel_relaxed(wake_low | bank->context.fallingdetect,
|
|
bank->base + bank->regs->fallingdetect);
|
|
wake_hi = bank->context.leveldetect1 & bank->context.wake_en;
|
|
if (wake_hi)
|
|
writel_relaxed(wake_hi | bank->context.risingdetect,
|
|
bank->base + bank->regs->risingdetect);
|
|
|
|
if (!bank->enabled_non_wakeup_gpios)
|
|
goto update_gpio_context_count;
|
|
|
|
if (bank->power_mode != OFF_MODE) {
|
|
bank->power_mode = 0;
|
|
goto update_gpio_context_count;
|
|
}
|
|
/*
|
|
* If going to OFF, remove triggering for all
|
|
* non-wakeup GPIOs. Otherwise spurious IRQs will be
|
|
* generated. See OMAP2420 Errata item 1.101.
|
|
*/
|
|
bank->saved_datain = readl_relaxed(bank->base +
|
|
bank->regs->datain);
|
|
l1 = bank->context.fallingdetect;
|
|
l2 = bank->context.risingdetect;
|
|
|
|
l1 &= ~bank->enabled_non_wakeup_gpios;
|
|
l2 &= ~bank->enabled_non_wakeup_gpios;
|
|
|
|
writel_relaxed(l1, bank->base + bank->regs->fallingdetect);
|
|
writel_relaxed(l2, bank->base + bank->regs->risingdetect);
|
|
|
|
bank->workaround_enabled = true;
|
|
|
|
update_gpio_context_count:
|
|
if (bank->get_context_loss_count)
|
|
bank->context_loss_count =
|
|
bank->get_context_loss_count(bank->dev);
|
|
|
|
omap_gpio_dbck_disable(bank);
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void omap_gpio_init_context(struct gpio_bank *p);
|
|
|
|
static int omap_gpio_runtime_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct gpio_bank *bank = platform_get_drvdata(pdev);
|
|
u32 l = 0, gen, gen0, gen1;
|
|
unsigned long flags;
|
|
int c;
|
|
|
|
raw_spin_lock_irqsave(&bank->lock, flags);
|
|
|
|
/*
|
|
* On the first resume during the probe, the context has not
|
|
* been initialised and so initialise it now. Also initialise
|
|
* the context loss count.
|
|
*/
|
|
if (bank->loses_context && !bank->context_valid) {
|
|
omap_gpio_init_context(bank);
|
|
|
|
if (bank->get_context_loss_count)
|
|
bank->context_loss_count =
|
|
bank->get_context_loss_count(bank->dev);
|
|
}
|
|
|
|
omap_gpio_dbck_enable(bank);
|
|
|
|
/*
|
|
* In ->runtime_suspend(), level-triggered, wakeup-enabled
|
|
* GPIOs were set to edge trigger also in order to be able to
|
|
* generate a PRCM wakeup. Here we restore the
|
|
* pre-runtime_suspend() values for edge triggering.
|
|
*/
|
|
writel_relaxed(bank->context.fallingdetect,
|
|
bank->base + bank->regs->fallingdetect);
|
|
writel_relaxed(bank->context.risingdetect,
|
|
bank->base + bank->regs->risingdetect);
|
|
|
|
if (bank->loses_context) {
|
|
if (!bank->get_context_loss_count) {
|
|
omap_gpio_restore_context(bank);
|
|
} else {
|
|
c = bank->get_context_loss_count(bank->dev);
|
|
if (c != bank->context_loss_count) {
|
|
omap_gpio_restore_context(bank);
|
|
} else {
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!bank->workaround_enabled) {
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
l = readl_relaxed(bank->base + bank->regs->datain);
|
|
|
|
/*
|
|
* Check if any of the non-wakeup interrupt GPIOs have changed
|
|
* state. If so, generate an IRQ by software. This is
|
|
* horribly racy, but it's the best we can do to work around
|
|
* this silicon bug.
|
|
*/
|
|
l ^= bank->saved_datain;
|
|
l &= bank->enabled_non_wakeup_gpios;
|
|
|
|
/*
|
|
* No need to generate IRQs for the rising edge for gpio IRQs
|
|
* configured with falling edge only; and vice versa.
|
|
*/
|
|
gen0 = l & bank->context.fallingdetect;
|
|
gen0 &= bank->saved_datain;
|
|
|
|
gen1 = l & bank->context.risingdetect;
|
|
gen1 &= ~(bank->saved_datain);
|
|
|
|
/* FIXME: Consider GPIO IRQs with level detections properly! */
|
|
gen = l & (~(bank->context.fallingdetect) &
|
|
~(bank->context.risingdetect));
|
|
/* Consider all GPIO IRQs needed to be updated */
|
|
gen |= gen0 | gen1;
|
|
|
|
if (gen) {
|
|
u32 old0, old1;
|
|
|
|
old0 = readl_relaxed(bank->base + bank->regs->leveldetect0);
|
|
old1 = readl_relaxed(bank->base + bank->regs->leveldetect1);
|
|
|
|
if (!bank->regs->irqstatus_raw0) {
|
|
writel_relaxed(old0 | gen, bank->base +
|
|
bank->regs->leveldetect0);
|
|
writel_relaxed(old1 | gen, bank->base +
|
|
bank->regs->leveldetect1);
|
|
}
|
|
|
|
if (bank->regs->irqstatus_raw0) {
|
|
writel_relaxed(old0 | l, bank->base +
|
|
bank->regs->leveldetect0);
|
|
writel_relaxed(old1 | l, bank->base +
|
|
bank->regs->leveldetect1);
|
|
}
|
|
writel_relaxed(old0, bank->base + bank->regs->leveldetect0);
|
|
writel_relaxed(old1, bank->base + bank->regs->leveldetect1);
|
|
}
|
|
|
|
bank->workaround_enabled = false;
|
|
raw_spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
#if IS_BUILTIN(CONFIG_GPIO_OMAP)
|
|
void omap2_gpio_prepare_for_idle(int pwr_mode)
|
|
{
|
|
struct gpio_bank *bank;
|
|
|
|
list_for_each_entry(bank, &omap_gpio_list, node) {
|
|
if (!BANK_USED(bank) || !bank->loses_context)
|
|
continue;
|
|
|
|
bank->power_mode = pwr_mode;
|
|
|
|
pm_runtime_put_sync_suspend(bank->dev);
|
|
}
|
|
}
|
|
|
|
void omap2_gpio_resume_after_idle(void)
|
|
{
|
|
struct gpio_bank *bank;
|
|
|
|
list_for_each_entry(bank, &omap_gpio_list, node) {
|
|
if (!BANK_USED(bank) || !bank->loses_context)
|
|
continue;
|
|
|
|
pm_runtime_get_sync(bank->dev);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_PM)
|
|
static void omap_gpio_init_context(struct gpio_bank *p)
|
|
{
|
|
struct omap_gpio_reg_offs *regs = p->regs;
|
|
void __iomem *base = p->base;
|
|
|
|
p->context.ctrl = readl_relaxed(base + regs->ctrl);
|
|
p->context.oe = readl_relaxed(base + regs->direction);
|
|
p->context.wake_en = readl_relaxed(base + regs->wkup_en);
|
|
p->context.leveldetect0 = readl_relaxed(base + regs->leveldetect0);
|
|
p->context.leveldetect1 = readl_relaxed(base + regs->leveldetect1);
|
|
p->context.risingdetect = readl_relaxed(base + regs->risingdetect);
|
|
p->context.fallingdetect = readl_relaxed(base + regs->fallingdetect);
|
|
p->context.irqenable1 = readl_relaxed(base + regs->irqenable);
|
|
p->context.irqenable2 = readl_relaxed(base + regs->irqenable2);
|
|
|
|
if (regs->set_dataout && p->regs->clr_dataout)
|
|
p->context.dataout = readl_relaxed(base + regs->set_dataout);
|
|
else
|
|
p->context.dataout = readl_relaxed(base + regs->dataout);
|
|
|
|
p->context_valid = true;
|
|
}
|
|
|
|
static void omap_gpio_restore_context(struct gpio_bank *bank)
|
|
{
|
|
writel_relaxed(bank->context.wake_en,
|
|
bank->base + bank->regs->wkup_en);
|
|
writel_relaxed(bank->context.ctrl, bank->base + bank->regs->ctrl);
|
|
writel_relaxed(bank->context.leveldetect0,
|
|
bank->base + bank->regs->leveldetect0);
|
|
writel_relaxed(bank->context.leveldetect1,
|
|
bank->base + bank->regs->leveldetect1);
|
|
writel_relaxed(bank->context.risingdetect,
|
|
bank->base + bank->regs->risingdetect);
|
|
writel_relaxed(bank->context.fallingdetect,
|
|
bank->base + bank->regs->fallingdetect);
|
|
if (bank->regs->set_dataout && bank->regs->clr_dataout)
|
|
writel_relaxed(bank->context.dataout,
|
|
bank->base + bank->regs->set_dataout);
|
|
else
|
|
writel_relaxed(bank->context.dataout,
|
|
bank->base + bank->regs->dataout);
|
|
writel_relaxed(bank->context.oe, bank->base + bank->regs->direction);
|
|
|
|
if (bank->dbck_enable_mask) {
|
|
writel_relaxed(bank->context.debounce, bank->base +
|
|
bank->regs->debounce);
|
|
writel_relaxed(bank->context.debounce_en,
|
|
bank->base + bank->regs->debounce_en);
|
|
}
|
|
|
|
writel_relaxed(bank->context.irqenable1,
|
|
bank->base + bank->regs->irqenable);
|
|
writel_relaxed(bank->context.irqenable2,
|
|
bank->base + bank->regs->irqenable2);
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
#else
|
|
#define omap_gpio_runtime_suspend NULL
|
|
#define omap_gpio_runtime_resume NULL
|
|
static inline void omap_gpio_init_context(struct gpio_bank *p) {}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops gpio_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume,
|
|
NULL)
|
|
};
|
|
|
|
#if defined(CONFIG_OF)
|
|
static struct omap_gpio_reg_offs omap2_gpio_regs = {
|
|
.revision = OMAP24XX_GPIO_REVISION,
|
|
.direction = OMAP24XX_GPIO_OE,
|
|
.datain = OMAP24XX_GPIO_DATAIN,
|
|
.dataout = OMAP24XX_GPIO_DATAOUT,
|
|
.set_dataout = OMAP24XX_GPIO_SETDATAOUT,
|
|
.clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT,
|
|
.irqstatus = OMAP24XX_GPIO_IRQSTATUS1,
|
|
.irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2,
|
|
.irqenable = OMAP24XX_GPIO_IRQENABLE1,
|
|
.irqenable2 = OMAP24XX_GPIO_IRQENABLE2,
|
|
.set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1,
|
|
.clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1,
|
|
.debounce = OMAP24XX_GPIO_DEBOUNCE_VAL,
|
|
.debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN,
|
|
.ctrl = OMAP24XX_GPIO_CTRL,
|
|
.wkup_en = OMAP24XX_GPIO_WAKE_EN,
|
|
.leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0,
|
|
.leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1,
|
|
.risingdetect = OMAP24XX_GPIO_RISINGDETECT,
|
|
.fallingdetect = OMAP24XX_GPIO_FALLINGDETECT,
|
|
};
|
|
|
|
static struct omap_gpio_reg_offs omap4_gpio_regs = {
|
|
.revision = OMAP4_GPIO_REVISION,
|
|
.direction = OMAP4_GPIO_OE,
|
|
.datain = OMAP4_GPIO_DATAIN,
|
|
.dataout = OMAP4_GPIO_DATAOUT,
|
|
.set_dataout = OMAP4_GPIO_SETDATAOUT,
|
|
.clr_dataout = OMAP4_GPIO_CLEARDATAOUT,
|
|
.irqstatus = OMAP4_GPIO_IRQSTATUS0,
|
|
.irqstatus2 = OMAP4_GPIO_IRQSTATUS1,
|
|
.irqenable = OMAP4_GPIO_IRQSTATUSSET0,
|
|
.irqenable2 = OMAP4_GPIO_IRQSTATUSSET1,
|
|
.set_irqenable = OMAP4_GPIO_IRQSTATUSSET0,
|
|
.clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0,
|
|
.debounce = OMAP4_GPIO_DEBOUNCINGTIME,
|
|
.debounce_en = OMAP4_GPIO_DEBOUNCENABLE,
|
|
.ctrl = OMAP4_GPIO_CTRL,
|
|
.wkup_en = OMAP4_GPIO_IRQWAKEN0,
|
|
.leveldetect0 = OMAP4_GPIO_LEVELDETECT0,
|
|
.leveldetect1 = OMAP4_GPIO_LEVELDETECT1,
|
|
.risingdetect = OMAP4_GPIO_RISINGDETECT,
|
|
.fallingdetect = OMAP4_GPIO_FALLINGDETECT,
|
|
};
|
|
|
|
static const struct omap_gpio_platform_data omap2_pdata = {
|
|
.regs = &omap2_gpio_regs,
|
|
.bank_width = 32,
|
|
.dbck_flag = false,
|
|
};
|
|
|
|
static const struct omap_gpio_platform_data omap3_pdata = {
|
|
.regs = &omap2_gpio_regs,
|
|
.bank_width = 32,
|
|
.dbck_flag = true,
|
|
};
|
|
|
|
static const struct omap_gpio_platform_data omap4_pdata = {
|
|
.regs = &omap4_gpio_regs,
|
|
.bank_width = 32,
|
|
.dbck_flag = true,
|
|
};
|
|
|
|
static const struct of_device_id omap_gpio_match[] = {
|
|
{
|
|
.compatible = "ti,omap4-gpio",
|
|
.data = &omap4_pdata,
|
|
},
|
|
{
|
|
.compatible = "ti,omap3-gpio",
|
|
.data = &omap3_pdata,
|
|
},
|
|
{
|
|
.compatible = "ti,omap2-gpio",
|
|
.data = &omap2_pdata,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_gpio_match);
|
|
#endif
|
|
|
|
static struct platform_driver omap_gpio_driver = {
|
|
.probe = omap_gpio_probe,
|
|
.remove = omap_gpio_remove,
|
|
.driver = {
|
|
.name = "omap_gpio",
|
|
.pm = &gpio_pm_ops,
|
|
.of_match_table = of_match_ptr(omap_gpio_match),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* gpio driver register needs to be done before
|
|
* machine_init functions access gpio APIs.
|
|
* Hence omap_gpio_drv_reg() is a postcore_initcall.
|
|
*/
|
|
static int __init omap_gpio_drv_reg(void)
|
|
{
|
|
return platform_driver_register(&omap_gpio_driver);
|
|
}
|
|
postcore_initcall(omap_gpio_drv_reg);
|
|
|
|
static void __exit omap_gpio_exit(void)
|
|
{
|
|
platform_driver_unregister(&omap_gpio_driver);
|
|
}
|
|
module_exit(omap_gpio_exit);
|
|
|
|
MODULE_DESCRIPTION("omap gpio driver");
|
|
MODULE_ALIAS("platform:gpio-omap");
|
|
MODULE_LICENSE("GPL v2");
|