mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 04:18:39 +08:00
2c69747c10
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-imx1.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-imx27.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-intel-lgm.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-mediatek.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-pxa.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-samsung.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-spear.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-visconti.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240610-md-drivers-pwm-v2-1-b337cfaa70ea@quicinc.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
177 lines
4.9 KiB
C
177 lines
4.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Toshiba Visconti pulse-width-modulation controller driver
|
|
*
|
|
* Copyright (c) 2020 - 2021 TOSHIBA CORPORATION
|
|
* Copyright (c) 2020 - 2021 Toshiba Electronic Devices & Storage Corporation
|
|
*
|
|
* Authors: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
|
|
*
|
|
* Limitations:
|
|
* - The fixed input clock is running at 1 MHz and is divided by either 1,
|
|
* 2, 4 or 8.
|
|
* - When the settings of the PWM are modified, the new values are shadowed
|
|
* in hardware until the PIPGM_PCSR register is written and the currently
|
|
* running period is completed. This way the hardware switches atomically
|
|
* from the old setting to the new.
|
|
* - Disabling the hardware completes the currently running period and keeps
|
|
* the output at low level at all times.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
|
|
#define PIPGM_PCSR(ch) (0x400 + 4 * (ch))
|
|
#define PIPGM_PDUT(ch) (0x420 + 4 * (ch))
|
|
#define PIPGM_PWMC(ch) (0x440 + 4 * (ch))
|
|
|
|
#define PIPGM_PWMC_PWMACT BIT(5)
|
|
#define PIPGM_PWMC_CLK_MASK GENMASK(1, 0)
|
|
#define PIPGM_PWMC_POLARITY_MASK GENMASK(5, 5)
|
|
|
|
struct visconti_pwm_chip {
|
|
void __iomem *base;
|
|
};
|
|
|
|
static inline struct visconti_pwm_chip *visconti_pwm_from_chip(struct pwm_chip *chip)
|
|
{
|
|
return pwmchip_get_drvdata(chip);
|
|
}
|
|
|
|
static int visconti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip);
|
|
u32 period, duty_cycle, pwmc0;
|
|
|
|
if (!state->enabled) {
|
|
writel(0, priv->base + PIPGM_PCSR(pwm->hwpwm));
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The biggest period the hardware can provide is
|
|
* (0xffff << 3) * 1000 ns
|
|
* This value fits easily in an u32, so simplify the maths by
|
|
* capping the values to 32 bit integers.
|
|
*/
|
|
if (state->period > (0xffff << 3) * 1000)
|
|
period = (0xffff << 3) * 1000;
|
|
else
|
|
period = state->period;
|
|
|
|
if (state->duty_cycle > period)
|
|
duty_cycle = period;
|
|
else
|
|
duty_cycle = state->duty_cycle;
|
|
|
|
/*
|
|
* The input clock runs fixed at 1 MHz, so we have only
|
|
* microsecond resolution and so can divide by
|
|
* NSEC_PER_SEC / CLKFREQ = 1000 without losing precision.
|
|
*/
|
|
period /= 1000;
|
|
duty_cycle /= 1000;
|
|
|
|
if (!period)
|
|
return -ERANGE;
|
|
|
|
/*
|
|
* PWMC controls a divider that divides the input clk by a power of two
|
|
* between 1 and 8. As a smaller divider yields higher precision, pick
|
|
* the smallest possible one. As period is at most 0xffff << 3, pwmc0 is
|
|
* in the intended range [0..3].
|
|
*/
|
|
pwmc0 = fls(period >> 16);
|
|
if (WARN_ON(pwmc0 > 3))
|
|
return -EINVAL;
|
|
|
|
period >>= pwmc0;
|
|
duty_cycle >>= pwmc0;
|
|
|
|
if (state->polarity == PWM_POLARITY_INVERSED)
|
|
pwmc0 |= PIPGM_PWMC_PWMACT;
|
|
writel(pwmc0, priv->base + PIPGM_PWMC(pwm->hwpwm));
|
|
writel(duty_cycle, priv->base + PIPGM_PDUT(pwm->hwpwm));
|
|
writel(period, priv->base + PIPGM_PCSR(pwm->hwpwm));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int visconti_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip);
|
|
u32 period, duty, pwmc0, pwmc0_clk;
|
|
|
|
period = readl(priv->base + PIPGM_PCSR(pwm->hwpwm));
|
|
duty = readl(priv->base + PIPGM_PDUT(pwm->hwpwm));
|
|
pwmc0 = readl(priv->base + PIPGM_PWMC(pwm->hwpwm));
|
|
pwmc0_clk = pwmc0 & PIPGM_PWMC_CLK_MASK;
|
|
|
|
state->period = (period << pwmc0_clk) * NSEC_PER_USEC;
|
|
state->duty_cycle = (duty << pwmc0_clk) * NSEC_PER_USEC;
|
|
if (pwmc0 & PIPGM_PWMC_POLARITY_MASK)
|
|
state->polarity = PWM_POLARITY_INVERSED;
|
|
else
|
|
state->polarity = PWM_POLARITY_NORMAL;
|
|
|
|
state->enabled = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops visconti_pwm_ops = {
|
|
.apply = visconti_pwm_apply,
|
|
.get_state = visconti_pwm_get_state,
|
|
};
|
|
|
|
static int visconti_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct pwm_chip *chip;
|
|
struct visconti_pwm_chip *priv;
|
|
int ret;
|
|
|
|
chip = devm_pwmchip_alloc(dev, 4, sizeof(*priv));
|
|
if (IS_ERR(chip))
|
|
return PTR_ERR(chip);
|
|
priv = visconti_pwm_from_chip(chip);
|
|
|
|
priv->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
chip->ops = &visconti_pwm_ops;
|
|
|
|
ret = devm_pwmchip_add(&pdev->dev, chip);
|
|
if (ret < 0)
|
|
return dev_err_probe(&pdev->dev, ret, "Cannot register visconti PWM\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id visconti_pwm_of_match[] = {
|
|
{ .compatible = "toshiba,visconti-pwm", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, visconti_pwm_of_match);
|
|
|
|
static struct platform_driver visconti_pwm_driver = {
|
|
.driver = {
|
|
.name = "pwm-visconti",
|
|
.of_match_table = visconti_pwm_of_match,
|
|
},
|
|
.probe = visconti_pwm_probe,
|
|
};
|
|
module_platform_driver(visconti_pwm_driver);
|
|
|
|
MODULE_DESCRIPTION("Toshiba Visconti Pulse Width Modulator driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>");
|
|
MODULE_ALIAS("platform:pwm-visconti");
|