linux/drivers/hwmon/it87.c
Frank Crawford 79a4c239e0 hwmon: (it87) Remove tests nolonger required
Remove DMI tests for boards that are known to have issues with entering
configuration mode, as now we are testing the chips directly and no
longer need to rely on matching the board.

Leave the DMI table in place, for the nVIDIA board, and any future
expansions.

Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20240428060653.2425296-5-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-04-30 10:32:14 -07:00

3798 lines
111 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* it87.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring.
*
* The IT8705F is an LPC-based Super I/O part that contains UARTs, a
* parallel port, an IR port, a MIDI port, a floppy controller, etc., in
* addition to an Environment Controller (Enhanced Hardware Monitor and
* Fan Controller)
*
* This driver supports only the Environment Controller in the IT8705F and
* similar parts. The other devices are supported by different drivers.
*
* Supports: IT8603E Super I/O chip w/LPC interface
* IT8620E Super I/O chip w/LPC interface
* IT8622E Super I/O chip w/LPC interface
* IT8623E Super I/O chip w/LPC interface
* IT8628E Super I/O chip w/LPC interface
* IT8705F Super I/O chip w/LPC interface
* IT8712F Super I/O chip w/LPC interface
* IT8716F Super I/O chip w/LPC interface
* IT8718F Super I/O chip w/LPC interface
* IT8720F Super I/O chip w/LPC interface
* IT8721F Super I/O chip w/LPC interface
* IT8726F Super I/O chip w/LPC interface
* IT8728F Super I/O chip w/LPC interface
* IT8732F Super I/O chip w/LPC interface
* IT8758E Super I/O chip w/LPC interface
* IT8771E Super I/O chip w/LPC interface
* IT8772E Super I/O chip w/LPC interface
* IT8781F Super I/O chip w/LPC interface
* IT8782F Super I/O chip w/LPC interface
* IT8783E/F Super I/O chip w/LPC interface
* IT8786E Super I/O chip w/LPC interface
* IT8790E Super I/O chip w/LPC interface
* IT8792E Super I/O chip w/LPC interface
* IT87952E Super I/O chip w/LPC interface
* Sis950 A clone of the IT8705F
*
* Copyright (C) 2001 Chris Gauthron
* Copyright (C) 2005-2010 Jean Delvare <jdelvare@suse.de>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/string.h>
#include <linux/dmi.h>
#include <linux/acpi.h>
#include <linux/io.h>
#define DRVNAME "it87"
enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8732,
it8771, it8772, it8781, it8782, it8783, it8786, it8790,
it8792, it8603, it8620, it8622, it8628, it87952 };
static struct platform_device *it87_pdev[2];
#define REG_2E 0x2e /* The register to read/write */
#define REG_4E 0x4e /* Secondary register to read/write */
#define DEV 0x07 /* Register: Logical device select */
#define PME 0x04 /* The device with the fan registers in it */
/* The device with the IT8718F/IT8720F VID value in it */
#define GPIO 0x07
#define DEVID 0x20 /* Register: Device ID */
#define DEVREV 0x22 /* Register: Device Revision */
static inline void __superio_enter(int ioreg)
{
outb(0x87, ioreg);
outb(0x01, ioreg);
outb(0x55, ioreg);
outb(ioreg == REG_4E ? 0xaa : 0x55, ioreg);
}
static inline int superio_inb(int ioreg, int reg)
{
outb(reg, ioreg);
return inb(ioreg + 1);
}
static inline void superio_outb(int ioreg, int reg, int val)
{
outb(reg, ioreg);
outb(val, ioreg + 1);
}
static int superio_inw(int ioreg, int reg)
{
int val;
outb(reg++, ioreg);
val = inb(ioreg + 1) << 8;
outb(reg, ioreg);
val |= inb(ioreg + 1);
return val;
}
static inline void superio_select(int ioreg, int ldn)
{
outb(DEV, ioreg);
outb(ldn, ioreg + 1);
}
static inline int superio_enter(int ioreg, bool noentry)
{
/*
* Try to reserve ioreg and ioreg + 1 for exclusive access.
*/
if (!request_muxed_region(ioreg, 2, DRVNAME))
return -EBUSY;
if (!noentry)
__superio_enter(ioreg);
return 0;
}
static inline void superio_exit(int ioreg, bool noexit)
{
if (!noexit) {
outb(0x02, ioreg);
outb(0x02, ioreg + 1);
}
release_region(ioreg, 2);
}
/* Logical device 4 registers */
#define IT8712F_DEVID 0x8712
#define IT8705F_DEVID 0x8705
#define IT8716F_DEVID 0x8716
#define IT8718F_DEVID 0x8718
#define IT8720F_DEVID 0x8720
#define IT8721F_DEVID 0x8721
#define IT8726F_DEVID 0x8726
#define IT8728F_DEVID 0x8728
#define IT8732F_DEVID 0x8732
#define IT8792E_DEVID 0x8733
#define IT8771E_DEVID 0x8771
#define IT8772E_DEVID 0x8772
#define IT8781F_DEVID 0x8781
#define IT8782F_DEVID 0x8782
#define IT8783E_DEVID 0x8783
#define IT8786E_DEVID 0x8786
#define IT8790E_DEVID 0x8790
#define IT8603E_DEVID 0x8603
#define IT8620E_DEVID 0x8620
#define IT8622E_DEVID 0x8622
#define IT8623E_DEVID 0x8623
#define IT8628E_DEVID 0x8628
#define IT87952E_DEVID 0x8695
/* Logical device 4 (Environmental Monitor) registers */
#define IT87_ACT_REG 0x30
#define IT87_BASE_REG 0x60
#define IT87_SPECIAL_CFG_REG 0xf3 /* special configuration register */
/* Logical device 7 registers (IT8712F and later) */
#define IT87_SIO_GPIO1_REG 0x25
#define IT87_SIO_GPIO2_REG 0x26
#define IT87_SIO_GPIO3_REG 0x27
#define IT87_SIO_GPIO4_REG 0x28
#define IT87_SIO_GPIO5_REG 0x29
#define IT87_SIO_PINX1_REG 0x2a /* Pin selection */
#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
#define IT87_SIO_SPI_REG 0xef /* SPI function pin select */
#define IT87_SIO_VID_REG 0xfc /* VID value */
#define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */
/* Force chip IDs to specified values. Should only be used for testing */
static unsigned short force_id[2];
static unsigned int force_id_cnt;
/* ACPI resource conflicts are ignored if this parameter is set to 1 */
static bool ignore_resource_conflict;
/* Update battery voltage after every reading if true */
static bool update_vbat;
/* Not all BIOSes properly configure the PWM registers */
static bool fix_pwm_polarity;
/* Many IT87 constants specified below */
/* Length of ISA address segment */
#define IT87_EXTENT 8
/* Length of ISA address segment for Environmental Controller */
#define IT87_EC_EXTENT 2
/* Offset of EC registers from ISA base address */
#define IT87_EC_OFFSET 5
/* Where are the ISA address/data registers relative to the EC base address */
#define IT87_ADDR_REG_OFFSET 0
#define IT87_DATA_REG_OFFSET 1
/*----- The IT87 registers -----*/
#define IT87_REG_CONFIG 0x00
#define IT87_REG_ALARM1 0x01
#define IT87_REG_ALARM2 0x02
#define IT87_REG_ALARM3 0x03
/*
* The IT8718F and IT8720F have the VID value in a different register, in
* Super-I/O configuration space.
*/
#define IT87_REG_VID 0x0a
/* Interface Selection register on other chips */
#define IT87_REG_IFSEL 0x0a
/*
* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
* for fan divisors. Later IT8712F revisions must use 16-bit tachometer
* mode.
*/
#define IT87_REG_FAN_DIV 0x0b
#define IT87_REG_FAN_16BIT 0x0c
/*
* Monitors:
* - up to 13 voltage (0 to 7, battery, avcc, 10 to 12)
* - up to 6 temp (1 to 6)
* - up to 6 fan (1 to 6)
*/
static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82, 0x4c };
static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86, 0x4e };
static const u8 IT87_REG_FANX[] = { 0x18, 0x19, 0x1a, 0x81, 0x83, 0x4d };
static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87, 0x4f };
static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 };
#define IT87_REG_FAN_MAIN_CTRL 0x13
#define IT87_REG_FAN_CTL 0x14
static const u8 IT87_REG_PWM[] = { 0x15, 0x16, 0x17, 0x7f, 0xa7, 0xaf };
static const u8 IT87_REG_PWM_DUTY[] = { 0x63, 0x6b, 0x73, 0x7b, 0xa3, 0xab };
static const u8 IT87_REG_VIN[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26,
0x27, 0x28, 0x2f, 0x2c, 0x2d, 0x2e };
#define IT87_REG_TEMP(nr) (0x29 + (nr))
#define IT87_REG_VIN_MAX(nr) (0x30 + (nr) * 2)
#define IT87_REG_VIN_MIN(nr) (0x31 + (nr) * 2)
#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
#define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2)
#define IT87_REG_VIN_ENABLE 0x50
#define IT87_REG_TEMP_ENABLE 0x51
#define IT87_REG_TEMP_EXTRA 0x55
#define IT87_REG_BEEP_ENABLE 0x5c
#define IT87_REG_CHIPID 0x58
static const u8 IT87_REG_AUTO_BASE[] = { 0x60, 0x68, 0x70, 0x78, 0xa0, 0xa8 };
#define IT87_REG_AUTO_TEMP(nr, i) (IT87_REG_AUTO_BASE[nr] + (i))
#define IT87_REG_AUTO_PWM(nr, i) (IT87_REG_AUTO_BASE[nr] + 5 + (i))
#define IT87_REG_TEMP456_ENABLE 0x77
#define NUM_VIN ARRAY_SIZE(IT87_REG_VIN)
#define NUM_VIN_LIMIT 8
#define NUM_TEMP 6
#define NUM_TEMP_OFFSET ARRAY_SIZE(IT87_REG_TEMP_OFFSET)
#define NUM_TEMP_LIMIT 3
#define NUM_FAN ARRAY_SIZE(IT87_REG_FAN)
#define NUM_FAN_DIV 3
#define NUM_PWM ARRAY_SIZE(IT87_REG_PWM)
#define NUM_AUTO_PWM ARRAY_SIZE(IT87_REG_PWM)
struct it87_devices {
const char *name;
const char * const model;
u32 features;
u8 peci_mask;
u8 old_peci_mask;
u8 smbus_bitmap; /* SMBus enable bits in extra config register */
u8 ec_special_config;
};
#define FEAT_12MV_ADC BIT(0)
#define FEAT_NEWER_AUTOPWM BIT(1)
#define FEAT_OLD_AUTOPWM BIT(2)
#define FEAT_16BIT_FANS BIT(3)
#define FEAT_TEMP_OFFSET BIT(4)
#define FEAT_TEMP_PECI BIT(5)
#define FEAT_TEMP_OLD_PECI BIT(6)
#define FEAT_FAN16_CONFIG BIT(7) /* Need to enable 16-bit fans */
#define FEAT_FIVE_FANS BIT(8) /* Supports five fans */
#define FEAT_VID BIT(9) /* Set if chip supports VID */
#define FEAT_IN7_INTERNAL BIT(10) /* Set if in7 is internal */
#define FEAT_SIX_FANS BIT(11) /* Supports six fans */
#define FEAT_10_9MV_ADC BIT(12)
#define FEAT_AVCC3 BIT(13) /* Chip supports in9/AVCC3 */
#define FEAT_FIVE_PWM BIT(14) /* Chip supports 5 pwm chn */
#define FEAT_SIX_PWM BIT(15) /* Chip supports 6 pwm chn */
#define FEAT_PWM_FREQ2 BIT(16) /* Separate pwm freq 2 */
#define FEAT_SIX_TEMP BIT(17) /* Up to 6 temp sensors */
#define FEAT_VIN3_5V BIT(18) /* VIN3 connected to +5V */
/*
* Disabling configuration mode on some chips can result in system
* hang-ups and access failures to the Super-IO chip at the
* second SIO address. Never exit configuration mode on these
* chips to avoid the problem.
*/
#define FEAT_NOCONF BIT(19) /* Chip conf mode enabled on startup */
#define FEAT_FOUR_FANS BIT(20) /* Supports four fans */
#define FEAT_FOUR_PWM BIT(21) /* Supports four fan controls */
#define FEAT_FOUR_TEMP BIT(22)
#define FEAT_FANCTL_ONOFF BIT(23) /* chip has FAN_CTL ON/OFF */
static const struct it87_devices it87_devices[] = {
[it87] = {
.name = "it87",
.model = "IT87F",
.features = FEAT_OLD_AUTOPWM | FEAT_FANCTL_ONOFF,
/* may need to overwrite */
},
[it8712] = {
.name = "it8712",
.model = "IT8712F",
.features = FEAT_OLD_AUTOPWM | FEAT_VID | FEAT_FANCTL_ONOFF,
/* may need to overwrite */
},
[it8716] = {
.name = "it8716",
.model = "IT8716F",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
| FEAT_FAN16_CONFIG | FEAT_FIVE_FANS | FEAT_PWM_FREQ2
| FEAT_FANCTL_ONOFF,
},
[it8718] = {
.name = "it8718",
.model = "IT8718F",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
| FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
.old_peci_mask = 0x4,
},
[it8720] = {
.name = "it8720",
.model = "IT8720F",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
| FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
.old_peci_mask = 0x4,
},
[it8721] = {
.name = "it8721",
.model = "IT8721F",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_FAN16_CONFIG | FEAT_FIVE_FANS | FEAT_IN7_INTERNAL
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
.peci_mask = 0x05,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
[it8728] = {
.name = "it8728",
.model = "IT8728F",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
| FEAT_IN7_INTERNAL | FEAT_PWM_FREQ2
| FEAT_FANCTL_ONOFF,
.peci_mask = 0x07,
},
[it8732] = {
.name = "it8732",
.model = "IT8732F",
.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FOUR_FANS
| FEAT_FOUR_PWM | FEAT_FANCTL_ONOFF,
.peci_mask = 0x07,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
[it8771] = {
.name = "it8771",
.model = "IT8771E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
/* PECI: guesswork */
/* 12mV ADC (OHM) */
/* 16 bit fans (OHM) */
/* three fans, always 16 bit (guesswork) */
.peci_mask = 0x07,
},
[it8772] = {
.name = "it8772",
.model = "IT8772E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
/* PECI (coreboot) */
/* 12mV ADC (HWSensors4, OHM) */
/* 16 bit fans (HWSensors4, OHM) */
/* three fans, always 16 bit (datasheet) */
.peci_mask = 0x07,
},
[it8781] = {
.name = "it8781",
.model = "IT8781F",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
| FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2
| FEAT_FANCTL_ONOFF,
.old_peci_mask = 0x4,
},
[it8782] = {
.name = "it8782",
.model = "IT8782F",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
| FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2
| FEAT_FANCTL_ONOFF,
.old_peci_mask = 0x4,
},
[it8783] = {
.name = "it8783",
.model = "IT8783E/F",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
| FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2
| FEAT_FANCTL_ONOFF,
.old_peci_mask = 0x4,
},
[it8786] = {
.name = "it8786",
.model = "IT8786E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
.peci_mask = 0x07,
},
[it8790] = {
.name = "it8790",
.model = "IT8790E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF | FEAT_NOCONF,
.peci_mask = 0x07,
},
[it8792] = {
.name = "it8792",
.model = "IT8792E/IT8795E",
.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF
| FEAT_NOCONF,
.peci_mask = 0x07,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
[it8603] = {
.name = "it8603",
.model = "IT8603E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
| FEAT_AVCC3 | FEAT_PWM_FREQ2,
.peci_mask = 0x07,
},
[it8620] = {
.name = "it8620",
.model = "IT8620E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
| FEAT_IN7_INTERNAL | FEAT_SIX_PWM | FEAT_PWM_FREQ2
| FEAT_SIX_TEMP | FEAT_VIN3_5V | FEAT_FANCTL_ONOFF,
.peci_mask = 0x07,
},
[it8622] = {
.name = "it8622",
.model = "IT8622E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
| FEAT_FIVE_PWM | FEAT_IN7_INTERNAL | FEAT_PWM_FREQ2
| FEAT_AVCC3 | FEAT_VIN3_5V | FEAT_FOUR_TEMP,
.peci_mask = 0x07,
.smbus_bitmap = BIT(1) | BIT(2),
},
[it8628] = {
.name = "it8628",
.model = "IT8628E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
| FEAT_IN7_INTERNAL | FEAT_SIX_PWM | FEAT_PWM_FREQ2
| FEAT_SIX_TEMP | FEAT_VIN3_5V | FEAT_FANCTL_ONOFF,
.peci_mask = 0x07,
},
[it87952] = {
.name = "it87952",
.model = "IT87952E",
.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF
| FEAT_NOCONF,
.peci_mask = 0x07,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
};
#define has_16bit_fans(data) ((data)->features & FEAT_16BIT_FANS)
#define has_12mv_adc(data) ((data)->features & FEAT_12MV_ADC)
#define has_10_9mv_adc(data) ((data)->features & FEAT_10_9MV_ADC)
#define has_newer_autopwm(data) ((data)->features & FEAT_NEWER_AUTOPWM)
#define has_old_autopwm(data) ((data)->features & FEAT_OLD_AUTOPWM)
#define has_temp_offset(data) ((data)->features & FEAT_TEMP_OFFSET)
#define has_temp_peci(data, nr) (((data)->features & FEAT_TEMP_PECI) && \
((data)->peci_mask & BIT(nr)))
#define has_temp_old_peci(data, nr) \
(((data)->features & FEAT_TEMP_OLD_PECI) && \
((data)->old_peci_mask & BIT(nr)))
#define has_fan16_config(data) ((data)->features & FEAT_FAN16_CONFIG)
#define has_four_fans(data) ((data)->features & (FEAT_FOUR_FANS | \
FEAT_FIVE_FANS | \
FEAT_SIX_FANS))
#define has_five_fans(data) ((data)->features & (FEAT_FIVE_FANS | \
FEAT_SIX_FANS))
#define has_six_fans(data) ((data)->features & FEAT_SIX_FANS)
#define has_vid(data) ((data)->features & FEAT_VID)
#define has_in7_internal(data) ((data)->features & FEAT_IN7_INTERNAL)
#define has_avcc3(data) ((data)->features & FEAT_AVCC3)
#define has_four_pwm(data) ((data)->features & (FEAT_FOUR_PWM | \
FEAT_FIVE_PWM | \
FEAT_SIX_PWM))
#define has_five_pwm(data) ((data)->features & (FEAT_FIVE_PWM | \
FEAT_SIX_PWM))
#define has_six_pwm(data) ((data)->features & FEAT_SIX_PWM)
#define has_pwm_freq2(data) ((data)->features & FEAT_PWM_FREQ2)
#define has_four_temp(data) ((data)->features & FEAT_FOUR_TEMP)
#define has_six_temp(data) ((data)->features & FEAT_SIX_TEMP)
#define has_vin3_5v(data) ((data)->features & FEAT_VIN3_5V)
#define has_noconf(data) ((data)->features & FEAT_NOCONF)
#define has_scaling(data) ((data)->features & (FEAT_12MV_ADC | \
FEAT_10_9MV_ADC))
#define has_fanctl_onoff(data) ((data)->features & FEAT_FANCTL_ONOFF)
struct it87_sio_data {
int sioaddr;
enum chips type;
/* Values read from Super-I/O config space */
u8 revision;
u8 vid_value;
u8 beep_pin;
u8 internal; /* Internal sensors can be labeled */
bool need_in7_reroute;
/* Features skipped based on config or DMI */
u16 skip_in;
u8 skip_vid;
u8 skip_fan;
u8 skip_pwm;
u8 skip_temp;
u8 smbus_bitmap;
u8 ec_special_config;
};
/*
* For each registered chip, we need to keep some data in memory.
* The structure is dynamically allocated.
*/
struct it87_data {
const struct attribute_group *groups[7];
int sioaddr;
enum chips type;
u32 features;
u8 peci_mask;
u8 old_peci_mask;
u8 smbus_bitmap; /* !=0 if SMBus needs to be disabled */
u8 ec_special_config; /* EC special config register restore value */
unsigned short addr;
const char *name;
struct mutex update_lock;
bool valid; /* true if following fields are valid */
unsigned long last_updated; /* In jiffies */
u16 in_scaled; /* Internal voltage sensors are scaled */
u16 in_internal; /* Bitfield, internal sensors (for labels) */
u16 has_in; /* Bitfield, voltage sensors enabled */
u8 in[NUM_VIN][3]; /* [nr][0]=in, [1]=min, [2]=max */
bool need_in7_reroute;
u8 has_fan; /* Bitfield, fans enabled */
u16 fan[NUM_FAN][2]; /* Register values, [nr][0]=fan, [1]=min */
u8 has_temp; /* Bitfield, temp sensors enabled */
s8 temp[NUM_TEMP][4]; /* [nr][0]=temp, [1]=min, [2]=max, [3]=offset */
u8 sensor; /* Register value (IT87_REG_TEMP_ENABLE) */
u8 extra; /* Register value (IT87_REG_TEMP_EXTRA) */
u8 fan_div[NUM_FAN_DIV];/* Register encoding, shifted right */
bool has_vid; /* True if VID supported */
u8 vid; /* Register encoding, combined */
u8 vrm;
u32 alarms; /* Register encoding, combined */
bool has_beep; /* true if beep supported */
u8 beeps; /* Register encoding */
u8 fan_main_ctrl; /* Register value */
u8 fan_ctl; /* Register value */
/*
* The following 3 arrays correspond to the same registers up to
* the IT8720F. The meaning of bits 6-0 depends on the value of bit
* 7, and we want to preserve settings on mode changes, so we have
* to track all values separately.
* Starting with the IT8721F, the manual PWM duty cycles are stored
* in separate registers (8-bit values), so the separate tracking
* is no longer needed, but it is still done to keep the driver
* simple.
*/
u8 has_pwm; /* Bitfield, pwm control enabled */
u8 pwm_ctrl[NUM_PWM]; /* Register value */
u8 pwm_duty[NUM_PWM]; /* Manual PWM value set by user */
u8 pwm_temp_map[NUM_PWM];/* PWM to temp. chan. mapping (bits 1-0) */
/* Automatic fan speed control registers */
u8 auto_pwm[NUM_AUTO_PWM][4]; /* [nr][3] is hard-coded */
s8 auto_temp[NUM_AUTO_PWM][5]; /* [nr][0] is point1_temp_hyst */
};
/* Board specific settings from DMI matching */
struct it87_dmi_data {
u8 skip_pwm; /* pwm channels to skip for this board */
};
/* Global for results from DMI matching, if needed */
static struct it87_dmi_data *dmi_data;
static int adc_lsb(const struct it87_data *data, int nr)
{
int lsb;
if (has_12mv_adc(data))
lsb = 120;
else if (has_10_9mv_adc(data))
lsb = 109;
else
lsb = 160;
if (data->in_scaled & BIT(nr))
lsb <<= 1;
return lsb;
}
static u8 in_to_reg(const struct it87_data *data, int nr, long val)
{
val = DIV_ROUND_CLOSEST(val * 10, adc_lsb(data, nr));
return clamp_val(val, 0, 255);
}
static int in_from_reg(const struct it87_data *data, int nr, int val)
{
return DIV_ROUND_CLOSEST(val * adc_lsb(data, nr), 10);
}
static inline u8 FAN_TO_REG(long rpm, int div)
{
if (rpm == 0)
return 255;
rpm = clamp_val(rpm, 1, 1000000);
return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
static inline u16 FAN16_TO_REG(long rpm)
{
if (rpm == 0)
return 0xffff;
return clamp_val((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
}
#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : (val) == 255 ? 0 : \
1350000 / ((val) * (div)))
/* The divider is fixed to 2 in 16-bit mode */
#define FAN16_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
1350000 / ((val) * 2))
#define TEMP_TO_REG(val) (clamp_val(((val) < 0 ? (((val) - 500) / 1000) : \
((val) + 500) / 1000), -128, 127))
#define TEMP_FROM_REG(val) ((val) * 1000)
static u8 pwm_to_reg(const struct it87_data *data, long val)
{
if (has_newer_autopwm(data))
return val;
else
return val >> 1;
}
static int pwm_from_reg(const struct it87_data *data, u8 reg)
{
if (has_newer_autopwm(data))
return reg;
else
return (reg & 0x7f) << 1;
}
static int DIV_TO_REG(int val)
{
int answer = 0;
while (answer < 7 && (val >>= 1))
answer++;
return answer;
}
#define DIV_FROM_REG(val) BIT(val)
/*
* PWM base frequencies. The frequency has to be divided by either 128 or 256,
* depending on the chip type, to calculate the actual PWM frequency.
*
* Some of the chip datasheets suggest a base frequency of 51 kHz instead
* of 750 kHz for the slowest base frequency, resulting in a PWM frequency
* of 200 Hz. Sometimes both PWM frequency select registers are affected,
* sometimes just one. It is unknown if this is a datasheet error or real,
* so this is ignored for now.
*/
static const unsigned int pwm_freq[8] = {
48000000,
24000000,
12000000,
8000000,
6000000,
3000000,
1500000,
750000,
};
static int smbus_disable(struct it87_data *data)
{
int err;
if (data->smbus_bitmap) {
err = superio_enter(data->sioaddr, has_noconf(data));
if (err)
return err;
superio_select(data->sioaddr, PME);
superio_outb(data->sioaddr, IT87_SPECIAL_CFG_REG,
data->ec_special_config & ~data->smbus_bitmap);
superio_exit(data->sioaddr, has_noconf(data));
}
return 0;
}
static int smbus_enable(struct it87_data *data)
{
int err;
if (data->smbus_bitmap) {
err = superio_enter(data->sioaddr, has_noconf(data));
if (err)
return err;
superio_select(data->sioaddr, PME);
superio_outb(data->sioaddr, IT87_SPECIAL_CFG_REG,
data->ec_special_config);
superio_exit(data->sioaddr, has_noconf(data));
}
return 0;
}
/*
* Must be called with data->update_lock held, except during initialization.
* Must be called with SMBus accesses disabled.
* We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
* would slow down the IT87 access and should not be necessary.
*/
static int it87_read_value(struct it87_data *data, u8 reg)
{
outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
return inb_p(data->addr + IT87_DATA_REG_OFFSET);
}
/*
* Must be called with data->update_lock held, except during initialization.
* Must be called with SMBus accesses disabled.
* We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
* would slow down the IT87 access and should not be necessary.
*/
static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
{
outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
}
static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
{
data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM[nr]);
if (has_newer_autopwm(data)) {
data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
data->pwm_duty[nr] = it87_read_value(data,
IT87_REG_PWM_DUTY[nr]);
} else {
if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
else /* Manual mode */
data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
}
if (has_old_autopwm(data)) {
int i;
for (i = 0; i < 5 ; i++)
data->auto_temp[nr][i] = it87_read_value(data,
IT87_REG_AUTO_TEMP(nr, i));
for (i = 0; i < 3 ; i++)
data->auto_pwm[nr][i] = it87_read_value(data,
IT87_REG_AUTO_PWM(nr, i));
} else if (has_newer_autopwm(data)) {
int i;
/*
* 0: temperature hysteresis (base + 5)
* 1: fan off temperature (base + 0)
* 2: fan start temperature (base + 1)
* 3: fan max temperature (base + 2)
*/
data->auto_temp[nr][0] =
it87_read_value(data, IT87_REG_AUTO_TEMP(nr, 5));
for (i = 0; i < 3 ; i++)
data->auto_temp[nr][i + 1] =
it87_read_value(data,
IT87_REG_AUTO_TEMP(nr, i));
/*
* 0: start pwm value (base + 3)
* 1: pwm slope (base + 4, 1/8th pwm)
*/
data->auto_pwm[nr][0] =
it87_read_value(data, IT87_REG_AUTO_TEMP(nr, 3));
data->auto_pwm[nr][1] =
it87_read_value(data, IT87_REG_AUTO_TEMP(nr, 4));
}
}
static int it87_lock(struct it87_data *data)
{
int err;
mutex_lock(&data->update_lock);
err = smbus_disable(data);
if (err)
mutex_unlock(&data->update_lock);
return err;
}
static void it87_unlock(struct it87_data *data)
{
smbus_enable(data);
mutex_unlock(&data->update_lock);
}
static struct it87_data *it87_update_device(struct device *dev)
{
struct it87_data *data = dev_get_drvdata(dev);
struct it87_data *ret = data;
int err;
int i;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2) ||
!data->valid) {
err = smbus_disable(data);
if (err) {
ret = ERR_PTR(err);
goto unlock;
}
if (update_vbat) {
/*
* Cleared after each update, so reenable. Value
* returned by this read will be previous value
*/
it87_write_value(data, IT87_REG_CONFIG,
it87_read_value(data, IT87_REG_CONFIG) | 0x40);
}
for (i = 0; i < NUM_VIN; i++) {
if (!(data->has_in & BIT(i)))
continue;
data->in[i][0] =
it87_read_value(data, IT87_REG_VIN[i]);
/* VBAT and AVCC don't have limit registers */
if (i >= NUM_VIN_LIMIT)
continue;
data->in[i][1] =
it87_read_value(data, IT87_REG_VIN_MIN(i));
data->in[i][2] =
it87_read_value(data, IT87_REG_VIN_MAX(i));
}
for (i = 0; i < NUM_FAN; i++) {
/* Skip disabled fans */
if (!(data->has_fan & BIT(i)))
continue;
data->fan[i][1] =
it87_read_value(data, IT87_REG_FAN_MIN[i]);
data->fan[i][0] = it87_read_value(data,
IT87_REG_FAN[i]);
/* Add high byte if in 16-bit mode */
if (has_16bit_fans(data)) {
data->fan[i][0] |= it87_read_value(data,
IT87_REG_FANX[i]) << 8;
data->fan[i][1] |= it87_read_value(data,
IT87_REG_FANX_MIN[i]) << 8;
}
}
for (i = 0; i < NUM_TEMP; i++) {
if (!(data->has_temp & BIT(i)))
continue;
data->temp[i][0] =
it87_read_value(data, IT87_REG_TEMP(i));
if (has_temp_offset(data) && i < NUM_TEMP_OFFSET)
data->temp[i][3] =
it87_read_value(data,
IT87_REG_TEMP_OFFSET[i]);
if (i >= NUM_TEMP_LIMIT)
continue;
data->temp[i][1] =
it87_read_value(data, IT87_REG_TEMP_LOW(i));
data->temp[i][2] =
it87_read_value(data, IT87_REG_TEMP_HIGH(i));
}
/* Newer chips don't have clock dividers */
if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
i = it87_read_value(data, IT87_REG_FAN_DIV);
data->fan_div[0] = i & 0x07;
data->fan_div[1] = (i >> 3) & 0x07;
data->fan_div[2] = (i & 0x40) ? 3 : 1;
}
data->alarms =
it87_read_value(data, IT87_REG_ALARM1) |
(it87_read_value(data, IT87_REG_ALARM2) << 8) |
(it87_read_value(data, IT87_REG_ALARM3) << 16);
data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
data->fan_main_ctrl = it87_read_value(data,
IT87_REG_FAN_MAIN_CTRL);
data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
for (i = 0; i < NUM_PWM; i++) {
if (!(data->has_pwm & BIT(i)))
continue;
it87_update_pwm_ctrl(data, i);
}
data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
/*
* The IT8705F does not have VID capability.
* The IT8718F and later don't use IT87_REG_VID for the
* same purpose.
*/
if (data->type == it8712 || data->type == it8716) {
data->vid = it87_read_value(data, IT87_REG_VID);
/*
* The older IT8712F revisions had only 5 VID pins,
* but we assume it is always safe to read 6 bits.
*/
data->vid &= 0x3f;
}
data->last_updated = jiffies;
data->valid = true;
smbus_enable(data);
}
unlock:
mutex_unlock(&data->update_lock);
return ret;
}
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
struct it87_data *data = it87_update_device(dev);
int index = sattr->index;
int nr = sattr->nr;
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in[nr][index]));
}
static ssize_t set_in(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
struct it87_data *data = dev_get_drvdata(dev);
int index = sattr->index;
int nr = sattr->nr;
unsigned long val;
int err;
if (kstrtoul(buf, 10, &val) < 0)
return -EINVAL;
err = it87_lock(data);
if (err)
return err;
data->in[nr][index] = in_to_reg(data, nr, val);
it87_write_value(data,
index == 1 ? IT87_REG_VIN_MIN(nr)
: IT87_REG_VIN_MAX(nr),
data->in[nr][index]);
it87_unlock(data);
return count;
}
static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0);
static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, set_in,
0, 1);
static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, set_in,
0, 2);
static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, 0);
static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_in, set_in,
1, 1);
static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_in, set_in,
1, 2);
static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, 0);
static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, set_in,
2, 1);
static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, set_in,
2, 2);
static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, 0);
static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, set_in,
3, 1);
static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, set_in,
3, 2);
static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, 0);
static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, set_in,
4, 1);
static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, set_in,
4, 2);
static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 5, 0);
static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_in, set_in,
5, 1);
static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_in, set_in,
5, 2);
static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 6, 0);
static SENSOR_DEVICE_ATTR_2(in6_min, S_IRUGO | S_IWUSR, show_in, set_in,
6, 1);
static SENSOR_DEVICE_ATTR_2(in6_max, S_IRUGO | S_IWUSR, show_in, set_in,
6, 2);
static SENSOR_DEVICE_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 7, 0);
static SENSOR_DEVICE_ATTR_2(in7_min, S_IRUGO | S_IWUSR, show_in, set_in,
7, 1);
static SENSOR_DEVICE_ATTR_2(in7_max, S_IRUGO | S_IWUSR, show_in, set_in,
7, 2);
static SENSOR_DEVICE_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 8, 0);
static SENSOR_DEVICE_ATTR_2(in9_input, S_IRUGO, show_in, NULL, 9, 0);
static SENSOR_DEVICE_ATTR_2(in10_input, S_IRUGO, show_in, NULL, 10, 0);
static SENSOR_DEVICE_ATTR_2(in11_input, S_IRUGO, show_in, NULL, 11, 0);
static SENSOR_DEVICE_ATTR_2(in12_input, S_IRUGO, show_in, NULL, 12, 0);
/* Up to 6 temperatures */
static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
int nr = sattr->nr;
int index = sattr->index;
struct it87_data *data = it87_update_device(dev);
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr][index]));
}
static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
int nr = sattr->nr;
int index = sattr->index;
struct it87_data *data = dev_get_drvdata(dev);
long val;
u8 reg, regval;
int err;
if (kstrtol(buf, 10, &val) < 0)
return -EINVAL;
err = it87_lock(data);
if (err)
return err;
switch (index) {
default:
case 1:
reg = IT87_REG_TEMP_LOW(nr);
break;
case 2:
reg = IT87_REG_TEMP_HIGH(nr);
break;
case 3:
regval = it87_read_value(data, IT87_REG_BEEP_ENABLE);
if (!(regval & 0x80)) {
regval |= 0x80;
it87_write_value(data, IT87_REG_BEEP_ENABLE, regval);
}
data->valid = false;
reg = IT87_REG_TEMP_OFFSET[nr];
break;
}
data->temp[nr][index] = TEMP_TO_REG(val);
it87_write_value(data, reg, data->temp[nr][index]);
it87_unlock(data);
return count;
}
static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
0, 1);
static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
0, 2);
static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp,
set_temp, 0, 3);
static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, 0);
static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
1, 1);
static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
1, 2);
static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp,
set_temp, 1, 3);
static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, 0);
static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
2, 1);
static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
2, 2);
static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp,
set_temp, 2, 3);
static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, 0);
static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, 0);
static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, 0);
static int get_temp_type(struct it87_data *data, int index)
{
/*
* 2 is deprecated;
* 3 = thermal diode;
* 4 = thermistor;
* 5 = AMDTSI;
* 6 = Intel PECI;
* 0 = disabled
*/
u8 reg, extra;
int ttype, type = 0;
/* Detect PECI vs. AMDTSI */
ttype = 6;
if ((has_temp_peci(data, index)) || data->type == it8721 ||
data->type == it8720) {
extra = it87_read_value(data, IT87_REG_IFSEL);
if ((extra & 0x70) == 0x40)
ttype = 5;
}
reg = it87_read_value(data, IT87_REG_TEMP_ENABLE);
/* Per chip special detection */
switch (data->type) {
case it8622:
if (!(reg & 0xc0) && index == 3)
type = ttype;
break;
default:
break;
}
if (type || index >= 3)
return type;
extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
if ((has_temp_peci(data, index) && (reg >> 6 == index + 1)) ||
(has_temp_old_peci(data, index) && (extra & 0x80)))
type = ttype; /* Intel PECI or AMDTSI */
else if (reg & BIT(index))
type = 3; /* thermal diode */
else if (reg & BIT(index + 3))
type = 4; /* thermistor */
return type;
}
static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = it87_update_device(dev);
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n", get_temp_type(data, sensor_attr->index));
}
static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct it87_data *data = dev_get_drvdata(dev);
long val;
u8 reg, extra;
int err;
if (kstrtol(buf, 10, &val) < 0)
return -EINVAL;
err = it87_lock(data);
if (err)
return err;
reg = it87_read_value(data, IT87_REG_TEMP_ENABLE);
reg &= ~(1 << nr);
reg &= ~(8 << nr);
if (has_temp_peci(data, nr) && (reg >> 6 == nr + 1 || val == 6))
reg &= 0x3f;
extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
if (has_temp_old_peci(data, nr) && ((extra & 0x80) || val == 6))
extra &= 0x7f;
if (val == 2) { /* backwards compatibility */
dev_warn(dev,
"Sensor type 2 is deprecated, please use 4 instead\n");
val = 4;
}
/* 3 = thermal diode; 4 = thermistor; 6 = Intel PECI; 0 = disabled */
if (val == 3)
reg |= 1 << nr;
else if (val == 4)
reg |= 8 << nr;
else if (has_temp_peci(data, nr) && val == 6)
reg |= (nr + 1) << 6;
else if (has_temp_old_peci(data, nr) && val == 6)
extra |= 0x80;
else if (val != 0) {
count = -EINVAL;
goto unlock;
}
data->sensor = reg;
data->extra = extra;
it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
if (has_temp_old_peci(data, nr))
it87_write_value(data, IT87_REG_TEMP_EXTRA, data->extra);
data->valid = false; /* Force cache refresh */
unlock:
it87_unlock(data);
return count;
}
static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR, show_temp_type,
set_temp_type, 0);
static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR, show_temp_type,
set_temp_type, 1);
static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, show_temp_type,
set_temp_type, 2);
/* 6 Fans */
static int pwm_mode(const struct it87_data *data, int nr)
{
if (has_fanctl_onoff(data) && nr < 3 &&
!(data->fan_main_ctrl & BIT(nr)))
return 0; /* Full speed */
if (data->pwm_ctrl[nr] & 0x80)
return 2; /* Automatic mode */
if ((!has_fanctl_onoff(data) || nr >= 3) &&
data->pwm_duty[nr] == pwm_to_reg(data, 0xff))
return 0; /* Full speed */
return 1; /* Manual mode */
}
static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
int nr = sattr->nr;
int index = sattr->index;
int speed;
struct it87_data *data = it87_update_device(dev);
if (IS_ERR(data))
return PTR_ERR(data);
speed = has_16bit_fans(data) ?
FAN16_FROM_REG(data->fan[nr][index]) :
FAN_FROM_REG(data->fan[nr][index],
DIV_FROM_REG(data->fan_div[nr]));
return sprintf(buf, "%d\n", speed);
}
static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = it87_update_device(dev);
int nr = sensor_attr->index;
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%lu\n", DIV_FROM_REG(data->fan_div[nr]));
}
static ssize_t show_pwm_enable(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = it87_update_device(dev);
int nr = sensor_attr->index;
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n", pwm_mode(data, nr));
}
static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = it87_update_device(dev);
int nr = sensor_attr->index;
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n",
pwm_from_reg(data, data->pwm_duty[nr]));
}
static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = it87_update_device(dev);
int nr = sensor_attr->index;
unsigned int freq;
int index;
if (IS_ERR(data))
return PTR_ERR(data);
if (has_pwm_freq2(data) && nr == 1)
index = (data->extra >> 4) & 0x07;
else
index = (data->fan_ctl >> 4) & 0x07;
freq = pwm_freq[index] / (has_newer_autopwm(data) ? 256 : 128);
return sprintf(buf, "%u\n", freq);
}
static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
int nr = sattr->nr;
int index = sattr->index;
struct it87_data *data = dev_get_drvdata(dev);
long val;
int err;
u8 reg;
if (kstrtol(buf, 10, &val) < 0)
return -EINVAL;
err = it87_lock(data);
if (err)
return err;
if (has_16bit_fans(data)) {
data->fan[nr][index] = FAN16_TO_REG(val);
it87_write_value(data, IT87_REG_FAN_MIN[nr],
data->fan[nr][index] & 0xff);
it87_write_value(data, IT87_REG_FANX_MIN[nr],
data->fan[nr][index] >> 8);
} else {
reg = it87_read_value(data, IT87_REG_FAN_DIV);
switch (nr) {
case 0:
data->fan_div[nr] = reg & 0x07;
break;
case 1:
data->fan_div[nr] = (reg >> 3) & 0x07;
break;
case 2:
data->fan_div[nr] = (reg & 0x40) ? 3 : 1;
break;
}
data->fan[nr][index] =
FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
it87_write_value(data, IT87_REG_FAN_MIN[nr],
data->fan[nr][index]);
}
it87_unlock(data);
return count;
}
static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = dev_get_drvdata(dev);
int nr = sensor_attr->index;
unsigned long val;
int min, err;
u8 old;
if (kstrtoul(buf, 10, &val) < 0)
return -EINVAL;
err = it87_lock(data);
if (err)
return err;
old = it87_read_value(data, IT87_REG_FAN_DIV);
/* Save fan min limit */
min = FAN_FROM_REG(data->fan[nr][1], DIV_FROM_REG(data->fan_div[nr]));
switch (nr) {
case 0:
case 1:
data->fan_div[nr] = DIV_TO_REG(val);
break;
case 2:
if (val < 8)
data->fan_div[nr] = 1;
else
data->fan_div[nr] = 3;
}
val = old & 0x80;
val |= (data->fan_div[0] & 0x07);
val |= (data->fan_div[1] & 0x07) << 3;
if (data->fan_div[2] == 3)
val |= 0x1 << 6;
it87_write_value(data, IT87_REG_FAN_DIV, val);
/* Restore fan min limit */
data->fan[nr][1] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan[nr][1]);
it87_unlock(data);
return count;
}
/* Returns 0 if OK, -EINVAL otherwise */
static int check_trip_points(struct device *dev, int nr)
{
const struct it87_data *data = dev_get_drvdata(dev);
int i, err = 0;
if (has_old_autopwm(data)) {
for (i = 0; i < 3; i++) {
if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
err = -EINVAL;
}
for (i = 0; i < 2; i++) {
if (data->auto_pwm[nr][i] > data->auto_pwm[nr][i + 1])
err = -EINVAL;
}
} else if (has_newer_autopwm(data)) {
for (i = 1; i < 3; i++) {
if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
err = -EINVAL;
}
}
if (err) {
dev_err(dev,
"Inconsistent trip points, not switching to automatic mode\n");
dev_err(dev, "Adjust the trip points and try again\n");
}
return err;
}
static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = dev_get_drvdata(dev);
int nr = sensor_attr->index;
long val;
int err;
if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 2)
return -EINVAL;
/* Check trip points before switching to automatic mode */
if (val == 2) {
if (check_trip_points(dev, nr) < 0)
return -EINVAL;
}
err = it87_lock(data);
if (err)
return err;
if (val == 0) {
if (nr < 3 && has_fanctl_onoff(data)) {
int tmp;
/* make sure the fan is on when in on/off mode */
tmp = it87_read_value(data, IT87_REG_FAN_CTL);
it87_write_value(data, IT87_REG_FAN_CTL, tmp | BIT(nr));
/* set on/off mode */
data->fan_main_ctrl &= ~BIT(nr);
it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
data->fan_main_ctrl);
} else {
u8 ctrl;
/* No on/off mode, set maximum pwm value */
data->pwm_duty[nr] = pwm_to_reg(data, 0xff);
it87_write_value(data, IT87_REG_PWM_DUTY[nr],
data->pwm_duty[nr]);
/* and set manual mode */
if (has_newer_autopwm(data)) {
ctrl = (data->pwm_ctrl[nr] & 0x7c) |
data->pwm_temp_map[nr];
} else {
ctrl = data->pwm_duty[nr];
}
data->pwm_ctrl[nr] = ctrl;
it87_write_value(data, IT87_REG_PWM[nr], ctrl);
}
} else {
u8 ctrl;
if (has_newer_autopwm(data)) {
ctrl = (data->pwm_ctrl[nr] & 0x7c) |
data->pwm_temp_map[nr];
if (val != 1)
ctrl |= 0x80;
} else {
ctrl = (val == 1 ? data->pwm_duty[nr] : 0x80);
}
data->pwm_ctrl[nr] = ctrl;
it87_write_value(data, IT87_REG_PWM[nr], ctrl);
if (has_fanctl_onoff(data) && nr < 3) {
/* set SmartGuardian mode */
data->fan_main_ctrl |= BIT(nr);
it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
data->fan_main_ctrl);
}
}
it87_unlock(data);
return count;
}
static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = dev_get_drvdata(dev);
int nr = sensor_attr->index;
long val;
int err;
if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 255)
return -EINVAL;
err = it87_lock(data);
if (err)
return err;
it87_update_pwm_ctrl(data, nr);
if (has_newer_autopwm(data)) {
/*
* If we are in automatic mode, the PWM duty cycle register
* is read-only so we can't write the value.
*/
if (data->pwm_ctrl[nr] & 0x80) {
count = -EBUSY;
goto unlock;
}
data->pwm_duty[nr] = pwm_to_reg(data, val);
it87_write_value(data, IT87_REG_PWM_DUTY[nr],
data->pwm_duty[nr]);
} else {
data->pwm_duty[nr] = pwm_to_reg(data, val);
/*
* If we are in manual mode, write the duty cycle immediately;
* otherwise, just store it for later use.
*/
if (!(data->pwm_ctrl[nr] & 0x80)) {
data->pwm_ctrl[nr] = data->pwm_duty[nr];
it87_write_value(data, IT87_REG_PWM[nr],
data->pwm_ctrl[nr]);
}
}
unlock:
it87_unlock(data);
return count;
}
static ssize_t set_pwm_freq(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = dev_get_drvdata(dev);
int nr = sensor_attr->index;
unsigned long val;
int err;
int i;
if (kstrtoul(buf, 10, &val) < 0)
return -EINVAL;
val = clamp_val(val, 0, 1000000);
val *= has_newer_autopwm(data) ? 256 : 128;
/* Search for the nearest available frequency */
for (i = 0; i < 7; i++) {
if (val > (pwm_freq[i] + pwm_freq[i + 1]) / 2)
break;
}
err = it87_lock(data);
if (err)
return err;
if (nr == 0) {
data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL) & 0x8f;
data->fan_ctl |= i << 4;
it87_write_value(data, IT87_REG_FAN_CTL, data->fan_ctl);
} else {
data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x8f;
data->extra |= i << 4;
it87_write_value(data, IT87_REG_TEMP_EXTRA, data->extra);
}
it87_unlock(data);
return count;
}
static ssize_t show_pwm_temp_map(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = it87_update_device(dev);
int nr = sensor_attr->index;
int map;
if (IS_ERR(data))
return PTR_ERR(data);
map = data->pwm_temp_map[nr];
if (map >= 3)
map = 0; /* Should never happen */
if (nr >= 3) /* pwm channels 3..6 map to temp4..6 */
map += 3;
return sprintf(buf, "%d\n", (int)BIT(map));
}
static ssize_t set_pwm_temp_map(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = dev_get_drvdata(dev);
int nr = sensor_attr->index;
long val;
int err;
u8 reg;
if (kstrtol(buf, 10, &val) < 0)
return -EINVAL;
if (nr >= 3)
val -= 3;
switch (val) {
case BIT(0):
reg = 0x00;
break;
case BIT(1):
reg = 0x01;
break;
case BIT(2):
reg = 0x02;
break;
default:
return -EINVAL;
}
err = it87_lock(data);
if (err)
return err;
it87_update_pwm_ctrl(data, nr);
data->pwm_temp_map[nr] = reg;
/*
* If we are in automatic mode, write the temp mapping immediately;
* otherwise, just store it for later use.
*/
if (data->pwm_ctrl[nr] & 0x80) {
data->pwm_ctrl[nr] = (data->pwm_ctrl[nr] & 0xfc) |
data->pwm_temp_map[nr];
it87_write_value(data, IT87_REG_PWM[nr], data->pwm_ctrl[nr]);
}
it87_unlock(data);
return count;
}
static ssize_t show_auto_pwm(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct it87_data *data = it87_update_device(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int point = sensor_attr->index;
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n",
pwm_from_reg(data, data->auto_pwm[nr][point]));
}
static ssize_t set_auto_pwm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct it87_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int point = sensor_attr->index;
int regaddr;
long val;
int err;
if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 255)
return -EINVAL;
err = it87_lock(data);
if (err)
return err;
data->auto_pwm[nr][point] = pwm_to_reg(data, val);
if (has_newer_autopwm(data))
regaddr = IT87_REG_AUTO_TEMP(nr, 3);
else
regaddr = IT87_REG_AUTO_PWM(nr, point);
it87_write_value(data, regaddr, data->auto_pwm[nr][point]);
it87_unlock(data);
return count;
}
static ssize_t show_auto_pwm_slope(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct it87_data *data = it87_update_device(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%d\n", data->auto_pwm[nr][1] & 0x7f);
}
static ssize_t set_auto_pwm_slope(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct it87_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
unsigned long val;
int err;
if (kstrtoul(buf, 10, &val) < 0 || val > 127)
return -EINVAL;
err = it87_lock(data);
if (err)
return err;
data->auto_pwm[nr][1] = (data->auto_pwm[nr][1] & 0x80) | val;
it87_write_value(data, IT87_REG_AUTO_TEMP(nr, 4),
data->auto_pwm[nr][1]);
it87_unlock(data);
return count;
}
static ssize_t show_auto_temp(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct it87_data *data = it87_update_device(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int point = sensor_attr->index;
int reg;
if (IS_ERR(data))
return PTR_ERR(data);
if (has_old_autopwm(data) || point)
reg = data->auto_temp[nr][point];
else
reg = data->auto_temp[nr][1] - (data->auto_temp[nr][0] & 0x1f);
return sprintf(buf, "%d\n", TEMP_FROM_REG(reg));
}
static ssize_t set_auto_temp(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct it87_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int point = sensor_attr->index;
long val;
int reg;
int err;
if (kstrtol(buf, 10, &val) < 0 || val < -128000 || val > 127000)
return -EINVAL;
err = it87_lock(data);
if (err)
return err;
if (has_newer_autopwm(data) && !point) {
reg = data->auto_temp[nr][1] - TEMP_TO_REG(val);
reg = clamp_val(reg, 0, 0x1f) | (data->auto_temp[nr][0] & 0xe0);
data->auto_temp[nr][0] = reg;
it87_write_value(data, IT87_REG_AUTO_TEMP(nr, 5), reg);
} else {
reg = TEMP_TO_REG(val);
data->auto_temp[nr][point] = reg;
if (has_newer_autopwm(data))
point--;
it87_write_value(data, IT87_REG_AUTO_TEMP(nr, point), reg);
}
it87_unlock(data);
return count;
}
static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0);
static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
0, 1);
static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, show_fan_div,
set_fan_div, 0);
static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 1, 0);
static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
1, 1);
static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, show_fan_div,
set_fan_div, 1);
static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 2, 0);
static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
2, 1);
static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR, show_fan_div,
set_fan_div, 2);
static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 3, 0);
static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
3, 1);
static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, 0);
static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
4, 1);
static SENSOR_DEVICE_ATTR_2(fan6_input, S_IRUGO, show_fan, NULL, 5, 0);
static SENSOR_DEVICE_ATTR_2(fan6_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
5, 1);
static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
show_pwm_enable, set_pwm_enable, 0);
static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 0);
static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR, show_pwm_freq,
set_pwm_freq, 0);
static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO,
show_pwm_temp_map, set_pwm_temp_map, 0);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 0, 0);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 0, 1);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 0, 2);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_pwm, S_IRUGO,
show_auto_pwm, NULL, 0, 3);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 0, 1);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 0, 0);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 0, 2);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 0, 3);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 0, 4);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_start, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 0, 0);
static SENSOR_DEVICE_ATTR(pwm1_auto_slope, S_IRUGO | S_IWUSR,
show_auto_pwm_slope, set_auto_pwm_slope, 0);
static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
show_pwm_enable, set_pwm_enable, 1);
static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 1);
static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO, show_pwm_freq, set_pwm_freq, 1);
static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IRUGO,
show_pwm_temp_map, set_pwm_temp_map, 1);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 1, 0);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 1, 1);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 1, 2);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_pwm, S_IRUGO,
show_auto_pwm, NULL, 1, 3);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 1, 1);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 1, 0);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 1, 2);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 1, 3);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 1, 4);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_start, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 1, 0);
static SENSOR_DEVICE_ATTR(pwm2_auto_slope, S_IRUGO | S_IWUSR,
show_auto_pwm_slope, set_auto_pwm_slope, 1);
static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR,
show_pwm_enable, set_pwm_enable, 2);
static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 2);
static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO, show_pwm_freq, NULL, 2);
static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IRUGO,
show_pwm_temp_map, set_pwm_temp_map, 2);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 2, 0);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 2, 1);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 2, 2);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point4_pwm, S_IRUGO,
show_auto_pwm, NULL, 2, 3);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 1);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 0);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 2);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 3);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point4_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 4);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_start, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 2, 0);
static SENSOR_DEVICE_ATTR(pwm3_auto_slope, S_IRUGO | S_IWUSR,
show_auto_pwm_slope, set_auto_pwm_slope, 2);
static SENSOR_DEVICE_ATTR(pwm4_enable, S_IRUGO | S_IWUSR,
show_pwm_enable, set_pwm_enable, 3);
static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 3);
static SENSOR_DEVICE_ATTR(pwm4_freq, S_IRUGO, show_pwm_freq, NULL, 3);
static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IRUGO,
show_pwm_temp_map, set_pwm_temp_map, 3);
static SENSOR_DEVICE_ATTR_2(pwm4_auto_point1_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 1);
static SENSOR_DEVICE_ATTR_2(pwm4_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 0);
static SENSOR_DEVICE_ATTR_2(pwm4_auto_point2_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 2);
static SENSOR_DEVICE_ATTR_2(pwm4_auto_point3_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 3);
static SENSOR_DEVICE_ATTR_2(pwm4_auto_start, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 3, 0);
static SENSOR_DEVICE_ATTR(pwm4_auto_slope, S_IRUGO | S_IWUSR,
show_auto_pwm_slope, set_auto_pwm_slope, 3);
static SENSOR_DEVICE_ATTR(pwm5_enable, S_IRUGO | S_IWUSR,
show_pwm_enable, set_pwm_enable, 4);
static SENSOR_DEVICE_ATTR(pwm5, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 4);
static SENSOR_DEVICE_ATTR(pwm5_freq, S_IRUGO, show_pwm_freq, NULL, 4);
static SENSOR_DEVICE_ATTR(pwm5_auto_channels_temp, S_IRUGO,
show_pwm_temp_map, set_pwm_temp_map, 4);
static SENSOR_DEVICE_ATTR_2(pwm5_auto_point1_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 1);
static SENSOR_DEVICE_ATTR_2(pwm5_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 0);
static SENSOR_DEVICE_ATTR_2(pwm5_auto_point2_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 2);
static SENSOR_DEVICE_ATTR_2(pwm5_auto_point3_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 3);
static SENSOR_DEVICE_ATTR_2(pwm5_auto_start, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 4, 0);
static SENSOR_DEVICE_ATTR(pwm5_auto_slope, S_IRUGO | S_IWUSR,
show_auto_pwm_slope, set_auto_pwm_slope, 4);
static SENSOR_DEVICE_ATTR(pwm6_enable, S_IRUGO | S_IWUSR,
show_pwm_enable, set_pwm_enable, 5);
static SENSOR_DEVICE_ATTR(pwm6, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 5);
static SENSOR_DEVICE_ATTR(pwm6_freq, S_IRUGO, show_pwm_freq, NULL, 5);
static SENSOR_DEVICE_ATTR(pwm6_auto_channels_temp, S_IRUGO,
show_pwm_temp_map, set_pwm_temp_map, 5);
static SENSOR_DEVICE_ATTR_2(pwm6_auto_point1_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 1);
static SENSOR_DEVICE_ATTR_2(pwm6_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 0);
static SENSOR_DEVICE_ATTR_2(pwm6_auto_point2_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 2);
static SENSOR_DEVICE_ATTR_2(pwm6_auto_point3_temp, S_IRUGO | S_IWUSR,
show_auto_temp, set_auto_temp, 2, 3);
static SENSOR_DEVICE_ATTR_2(pwm6_auto_start, S_IRUGO | S_IWUSR,
show_auto_pwm, set_auto_pwm, 5, 0);
static SENSOR_DEVICE_ATTR(pwm6_auto_slope, S_IRUGO | S_IWUSR,
show_auto_pwm_slope, set_auto_pwm_slope, 5);
/* Alarms */
static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct it87_data *data = it87_update_device(dev);
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%u\n", data->alarms);
}
static DEVICE_ATTR_RO(alarms);
static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct it87_data *data = it87_update_device(dev);
int bitnr = to_sensor_dev_attr(attr)->index;
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
}
static ssize_t clear_intrusion(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
struct it87_data *data = dev_get_drvdata(dev);
int err, config;
long val;
if (kstrtol(buf, 10, &val) < 0 || val != 0)
return -EINVAL;
err = it87_lock(data);
if (err)
return err;
config = it87_read_value(data, IT87_REG_CONFIG);
if (config < 0) {
count = config;
} else {
config |= BIT(5);
it87_write_value(data, IT87_REG_CONFIG, config);
/* Invalidate cache to force re-read */
data->valid = false;
}
it87_unlock(data);
return count;
}
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8);
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9);
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10);
static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 11);
static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 12);
static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 13);
static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 14);
static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 15);
static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 7);
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
show_alarm, clear_intrusion, 4);
static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct it87_data *data = it87_update_device(dev);
int bitnr = to_sensor_dev_attr(attr)->index;
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%u\n", (data->beeps >> bitnr) & 1);
}
static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int bitnr = to_sensor_dev_attr(attr)->index;
struct it87_data *data = dev_get_drvdata(dev);
long val;
int err;
if (kstrtol(buf, 10, &val) < 0 || (val != 0 && val != 1))
return -EINVAL;
err = it87_lock(data);
if (err)
return err;
data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
if (val)
data->beeps |= BIT(bitnr);
else
data->beeps &= ~BIT(bitnr);
it87_write_value(data, IT87_REG_BEEP_ENABLE, data->beeps);
it87_unlock(data);
return count;
}
static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
show_beep, set_beep, 1);
static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO, show_beep, NULL, 1);
static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO, show_beep, NULL, 1);
/* fanX_beep writability is set later */
static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan4_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan5_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan6_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
show_beep, set_beep, 2);
static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_beep, NULL, 2);
static ssize_t vrm_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct it87_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", data->vrm);
}
static ssize_t vrm_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct it87_data *data = dev_get_drvdata(dev);
unsigned long val;
if (kstrtoul(buf, 10, &val) < 0)
return -EINVAL;
data->vrm = val;
return count;
}
static DEVICE_ATTR_RW(vrm);
static ssize_t cpu0_vid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct it87_data *data = it87_update_device(dev);
if (IS_ERR(data))
return PTR_ERR(data);
return sprintf(buf, "%ld\n", (long)vid_from_reg(data->vid, data->vrm));
}
static DEVICE_ATTR_RO(cpu0_vid);
static ssize_t show_label(struct device *dev, struct device_attribute *attr,
char *buf)
{
static const char * const labels[] = {
"+5V",
"5VSB",
"Vbat",
"AVCC",
};
static const char * const labels_it8721[] = {
"+3.3V",
"3VSB",
"Vbat",
"+3.3V",
};
struct it87_data *data = dev_get_drvdata(dev);
int nr = to_sensor_dev_attr(attr)->index;
const char *label;
if (has_vin3_5v(data) && nr == 0)
label = labels[0];
else if (has_scaling(data))
label = labels_it8721[nr];
else
label = labels[nr];
return sprintf(buf, "%s\n", label);
}
static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0);
static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1);
static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 2);
/* AVCC3 */
static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 3);
static umode_t it87_in_is_visible(struct kobject *kobj,
struct attribute *attr, int index)
{
struct device *dev = kobj_to_dev(kobj);
struct it87_data *data = dev_get_drvdata(dev);
int i = index / 5; /* voltage index */
int a = index % 5; /* attribute index */
if (index >= 40) { /* in8 and higher only have input attributes */
i = index - 40 + 8;
a = 0;
}
if (!(data->has_in & BIT(i)))
return 0;
if (a == 4 && !data->has_beep)
return 0;
return attr->mode;
}
static struct attribute *it87_attributes_in[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in0_min.dev_attr.attr,
&sensor_dev_attr_in0_max.dev_attr.attr,
&sensor_dev_attr_in0_alarm.dev_attr.attr,
&sensor_dev_attr_in0_beep.dev_attr.attr, /* 4 */
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_min.dev_attr.attr,
&sensor_dev_attr_in1_max.dev_attr.attr,
&sensor_dev_attr_in1_alarm.dev_attr.attr,
&sensor_dev_attr_in1_beep.dev_attr.attr, /* 9 */
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in2_min.dev_attr.attr,
&sensor_dev_attr_in2_max.dev_attr.attr,
&sensor_dev_attr_in2_alarm.dev_attr.attr,
&sensor_dev_attr_in2_beep.dev_attr.attr, /* 14 */
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_in3_min.dev_attr.attr,
&sensor_dev_attr_in3_max.dev_attr.attr,
&sensor_dev_attr_in3_alarm.dev_attr.attr,
&sensor_dev_attr_in3_beep.dev_attr.attr, /* 19 */
&sensor_dev_attr_in4_input.dev_attr.attr,
&sensor_dev_attr_in4_min.dev_attr.attr,
&sensor_dev_attr_in4_max.dev_attr.attr,
&sensor_dev_attr_in4_alarm.dev_attr.attr,
&sensor_dev_attr_in4_beep.dev_attr.attr, /* 24 */
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in5_min.dev_attr.attr,
&sensor_dev_attr_in5_max.dev_attr.attr,
&sensor_dev_attr_in5_alarm.dev_attr.attr,
&sensor_dev_attr_in5_beep.dev_attr.attr, /* 29 */
&sensor_dev_attr_in6_input.dev_attr.attr,
&sensor_dev_attr_in6_min.dev_attr.attr,
&sensor_dev_attr_in6_max.dev_attr.attr,
&sensor_dev_attr_in6_alarm.dev_attr.attr,
&sensor_dev_attr_in6_beep.dev_attr.attr, /* 34 */
&sensor_dev_attr_in7_input.dev_attr.attr,
&sensor_dev_attr_in7_min.dev_attr.attr,
&sensor_dev_attr_in7_max.dev_attr.attr,
&sensor_dev_attr_in7_alarm.dev_attr.attr,
&sensor_dev_attr_in7_beep.dev_attr.attr, /* 39 */
&sensor_dev_attr_in8_input.dev_attr.attr, /* 40 */
&sensor_dev_attr_in9_input.dev_attr.attr,
&sensor_dev_attr_in10_input.dev_attr.attr,
&sensor_dev_attr_in11_input.dev_attr.attr,
&sensor_dev_attr_in12_input.dev_attr.attr,
NULL
};
static const struct attribute_group it87_group_in = {
.attrs = it87_attributes_in,
.is_visible = it87_in_is_visible,
};
static umode_t it87_temp_is_visible(struct kobject *kobj,
struct attribute *attr, int index)
{
struct device *dev = kobj_to_dev(kobj);
struct it87_data *data = dev_get_drvdata(dev);
int i = index / 7; /* temperature index */
int a = index % 7; /* attribute index */
if (index >= 21) {
i = index - 21 + 3;
a = 0;
}
if (!(data->has_temp & BIT(i)))
return 0;
if (a == 3) {
if (get_temp_type(data, i) == 0)
return 0;
return attr->mode;
}
if (a == 5 && !has_temp_offset(data))
return 0;
if (a == 6 && !data->has_beep)
return 0;
return attr->mode;
}
static struct attribute *it87_attributes_temp[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_min.dev_attr.attr,
&sensor_dev_attr_temp1_type.dev_attr.attr,
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_offset.dev_attr.attr, /* 5 */
&sensor_dev_attr_temp1_beep.dev_attr.attr, /* 6 */
&sensor_dev_attr_temp2_input.dev_attr.attr, /* 7 */
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp2_min.dev_attr.attr,
&sensor_dev_attr_temp2_type.dev_attr.attr,
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_offset.dev_attr.attr,
&sensor_dev_attr_temp2_beep.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr, /* 14 */
&sensor_dev_attr_temp3_max.dev_attr.attr,
&sensor_dev_attr_temp3_min.dev_attr.attr,
&sensor_dev_attr_temp3_type.dev_attr.attr,
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_offset.dev_attr.attr,
&sensor_dev_attr_temp3_beep.dev_attr.attr,
&sensor_dev_attr_temp4_input.dev_attr.attr, /* 21 */
&sensor_dev_attr_temp5_input.dev_attr.attr,
&sensor_dev_attr_temp6_input.dev_attr.attr,
NULL
};
static const struct attribute_group it87_group_temp = {
.attrs = it87_attributes_temp,
.is_visible = it87_temp_is_visible,
};
static umode_t it87_is_visible(struct kobject *kobj,
struct attribute *attr, int index)
{
struct device *dev = kobj_to_dev(kobj);
struct it87_data *data = dev_get_drvdata(dev);
if ((index == 2 || index == 3) && !data->has_vid)
return 0;
if (index > 3 && !(data->in_internal & BIT(index - 4)))
return 0;
return attr->mode;
}
static struct attribute *it87_attributes[] = {
&dev_attr_alarms.attr,
&sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
&dev_attr_vrm.attr, /* 2 */
&dev_attr_cpu0_vid.attr, /* 3 */
&sensor_dev_attr_in3_label.dev_attr.attr, /* 4 .. 7 */
&sensor_dev_attr_in7_label.dev_attr.attr,
&sensor_dev_attr_in8_label.dev_attr.attr,
&sensor_dev_attr_in9_label.dev_attr.attr,
NULL
};
static const struct attribute_group it87_group = {
.attrs = it87_attributes,
.is_visible = it87_is_visible,
};
static umode_t it87_fan_is_visible(struct kobject *kobj,
struct attribute *attr, int index)
{
struct device *dev = kobj_to_dev(kobj);
struct it87_data *data = dev_get_drvdata(dev);
int i = index / 5; /* fan index */
int a = index % 5; /* attribute index */
if (index >= 15) { /* fan 4..6 don't have divisor attributes */
i = (index - 15) / 4 + 3;
a = (index - 15) % 4;
}
if (!(data->has_fan & BIT(i)))
return 0;
if (a == 3) { /* beep */
if (!data->has_beep)
return 0;
/* first fan beep attribute is writable */
if (i == __ffs(data->has_fan))
return attr->mode | S_IWUSR;
}
if (a == 4 && has_16bit_fans(data)) /* divisor */
return 0;
return attr->mode;
}
static struct attribute *it87_attributes_fan[] = {
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
&sensor_dev_attr_fan1_beep.dev_attr.attr, /* 3 */
&sensor_dev_attr_fan1_div.dev_attr.attr, /* 4 */
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
&sensor_dev_attr_fan2_beep.dev_attr.attr,
&sensor_dev_attr_fan2_div.dev_attr.attr, /* 9 */
&sensor_dev_attr_fan3_input.dev_attr.attr,
&sensor_dev_attr_fan3_min.dev_attr.attr,
&sensor_dev_attr_fan3_alarm.dev_attr.attr,
&sensor_dev_attr_fan3_beep.dev_attr.attr,
&sensor_dev_attr_fan3_div.dev_attr.attr, /* 14 */
&sensor_dev_attr_fan4_input.dev_attr.attr, /* 15 */
&sensor_dev_attr_fan4_min.dev_attr.attr,
&sensor_dev_attr_fan4_alarm.dev_attr.attr,
&sensor_dev_attr_fan4_beep.dev_attr.attr,
&sensor_dev_attr_fan5_input.dev_attr.attr, /* 19 */
&sensor_dev_attr_fan5_min.dev_attr.attr,
&sensor_dev_attr_fan5_alarm.dev_attr.attr,
&sensor_dev_attr_fan5_beep.dev_attr.attr,
&sensor_dev_attr_fan6_input.dev_attr.attr, /* 23 */
&sensor_dev_attr_fan6_min.dev_attr.attr,
&sensor_dev_attr_fan6_alarm.dev_attr.attr,
&sensor_dev_attr_fan6_beep.dev_attr.attr,
NULL
};
static const struct attribute_group it87_group_fan = {
.attrs = it87_attributes_fan,
.is_visible = it87_fan_is_visible,
};
static umode_t it87_pwm_is_visible(struct kobject *kobj,
struct attribute *attr, int index)
{
struct device *dev = kobj_to_dev(kobj);
struct it87_data *data = dev_get_drvdata(dev);
int i = index / 4; /* pwm index */
int a = index % 4; /* attribute index */
if (!(data->has_pwm & BIT(i)))
return 0;
/* pwmX_auto_channels_temp is only writable if auto pwm is supported */
if (a == 3 && (has_old_autopwm(data) || has_newer_autopwm(data)))
return attr->mode | S_IWUSR;
/* pwm2_freq is writable if there are two pwm frequency selects */
if (has_pwm_freq2(data) && i == 1 && a == 2)
return attr->mode | S_IWUSR;
return attr->mode;
}
static struct attribute *it87_attributes_pwm[] = {
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_freq.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_pwm2_freq.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
&sensor_dev_attr_pwm3.dev_attr.attr,
&sensor_dev_attr_pwm3_freq.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm4_enable.dev_attr.attr,
&sensor_dev_attr_pwm4.dev_attr.attr,
&sensor_dev_attr_pwm4_freq.dev_attr.attr,
&sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm5_enable.dev_attr.attr,
&sensor_dev_attr_pwm5.dev_attr.attr,
&sensor_dev_attr_pwm5_freq.dev_attr.attr,
&sensor_dev_attr_pwm5_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm6_enable.dev_attr.attr,
&sensor_dev_attr_pwm6.dev_attr.attr,
&sensor_dev_attr_pwm6_freq.dev_attr.attr,
&sensor_dev_attr_pwm6_auto_channels_temp.dev_attr.attr,
NULL
};
static const struct attribute_group it87_group_pwm = {
.attrs = it87_attributes_pwm,
.is_visible = it87_pwm_is_visible,
};
static umode_t it87_auto_pwm_is_visible(struct kobject *kobj,
struct attribute *attr, int index)
{
struct device *dev = kobj_to_dev(kobj);
struct it87_data *data = dev_get_drvdata(dev);
int i = index / 11; /* pwm index */
int a = index % 11; /* attribute index */
if (index >= 33) { /* pwm 4..6 */
i = (index - 33) / 6 + 3;
a = (index - 33) % 6 + 4;
}
if (!(data->has_pwm & BIT(i)))
return 0;
if (has_newer_autopwm(data)) {
if (a < 4) /* no auto point pwm */
return 0;
if (a == 8) /* no auto_point4 */
return 0;
}
if (has_old_autopwm(data)) {
if (a >= 9) /* no pwm_auto_start, pwm_auto_slope */
return 0;
}
return attr->mode;
}
static struct attribute *it87_attributes_auto_pwm[] = {
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_start.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_slope.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, /* 11 */
&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_start.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_slope.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, /* 22 */
&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point3_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point4_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_start.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_slope.dev_attr.attr,
&sensor_dev_attr_pwm4_auto_point1_temp.dev_attr.attr, /* 33 */
&sensor_dev_attr_pwm4_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr,
&sensor_dev_attr_pwm4_auto_point3_temp.dev_attr.attr,
&sensor_dev_attr_pwm4_auto_start.dev_attr.attr,
&sensor_dev_attr_pwm4_auto_slope.dev_attr.attr,
&sensor_dev_attr_pwm5_auto_point1_temp.dev_attr.attr,
&sensor_dev_attr_pwm5_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_pwm5_auto_point2_temp.dev_attr.attr,
&sensor_dev_attr_pwm5_auto_point3_temp.dev_attr.attr,
&sensor_dev_attr_pwm5_auto_start.dev_attr.attr,
&sensor_dev_attr_pwm5_auto_slope.dev_attr.attr,
&sensor_dev_attr_pwm6_auto_point1_temp.dev_attr.attr,
&sensor_dev_attr_pwm6_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_pwm6_auto_point2_temp.dev_attr.attr,
&sensor_dev_attr_pwm6_auto_point3_temp.dev_attr.attr,
&sensor_dev_attr_pwm6_auto_start.dev_attr.attr,
&sensor_dev_attr_pwm6_auto_slope.dev_attr.attr,
NULL,
};
static const struct attribute_group it87_group_auto_pwm = {
.attrs = it87_attributes_auto_pwm,
.is_visible = it87_auto_pwm_is_visible,
};
/*
* Original explanation:
* On various Gigabyte AM4 boards (AB350, AX370), the second Super-IO chip
* (IT8792E) needs to be in configuration mode before accessing the first
* due to a bug in IT8792E which otherwise results in LPC bus access errors.
* This needs to be done before accessing the first Super-IO chip since
* the second chip may have been accessed prior to loading this driver.
*
* The problem is also reported to affect IT8795E, which is used on X299 boards
* and has the same chip ID as IT8792E (0x8733). It also appears to affect
* systems with IT8790E, which is used on some Z97X-Gaming boards as well as
* Z87X-OC.
*
* From other information supplied:
* ChipIDs 0x8733, 0x8695 (early ID for IT87952E) and 0x8790 are initialized
* and left in configuration mode, and entering and/or exiting configuration
* mode is what causes the crash.
*
* The recommendation is to look up the chipID before doing any mode swap
* and then act accordingly.
*/
/* SuperIO detection - will change isa_address if a chip is found */
static int __init it87_find(int sioaddr, unsigned short *address,
struct it87_sio_data *sio_data, int chip_cnt)
{
int err;
u16 chip_type;
const struct it87_devices *config = NULL;
bool enabled = false;
/* First step, lock memory but don't enter configuration mode */
err = superio_enter(sioaddr, true);
if (err)
return err;
err = -ENODEV;
chip_type = superio_inw(sioaddr, DEVID);
/* Check for a valid chip before forcing chip id */
if (chip_type == 0xffff) {
/* Enter configuration mode */
__superio_enter(sioaddr);
enabled = true;
/* and then try again */
chip_type = superio_inw(sioaddr, DEVID);
if (chip_type == 0xffff)
goto exit;
}
if (force_id_cnt == 1) {
/* If only one value given use for all chips */
if (force_id[0])
chip_type = force_id[0];
} else if (force_id[chip_cnt])
chip_type = force_id[chip_cnt];
switch (chip_type) {
case IT8705F_DEVID:
sio_data->type = it87;
break;
case IT8712F_DEVID:
sio_data->type = it8712;
break;
case IT8716F_DEVID:
case IT8726F_DEVID:
sio_data->type = it8716;
break;
case IT8718F_DEVID:
sio_data->type = it8718;
break;
case IT8720F_DEVID:
sio_data->type = it8720;
break;
case IT8721F_DEVID:
sio_data->type = it8721;
break;
case IT8728F_DEVID:
sio_data->type = it8728;
break;
case IT8732F_DEVID:
sio_data->type = it8732;
break;
case IT8792E_DEVID:
sio_data->type = it8792;
break;
case IT8771E_DEVID:
sio_data->type = it8771;
break;
case IT8772E_DEVID:
sio_data->type = it8772;
break;
case IT8781F_DEVID:
sio_data->type = it8781;
break;
case IT8782F_DEVID:
sio_data->type = it8782;
break;
case IT8783E_DEVID:
sio_data->type = it8783;
break;
case IT8786E_DEVID:
sio_data->type = it8786;
break;
case IT8790E_DEVID:
sio_data->type = it8790;
break;
case IT8603E_DEVID:
case IT8623E_DEVID:
sio_data->type = it8603;
break;
case IT8620E_DEVID:
sio_data->type = it8620;
break;
case IT8622E_DEVID:
sio_data->type = it8622;
break;
case IT8628E_DEVID:
sio_data->type = it8628;
break;
case IT87952E_DEVID:
sio_data->type = it87952;
break;
case 0xffff: /* No device at all */
goto exit;
default:
pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
goto exit;
}
config = &it87_devices[sio_data->type];
/*
* If previously we didn't enter configuration mode and it isn't a
* chip we know is initialised in configuration mode, then enter
* configuration mode.
*
* I don't know if any such chips can exist but be defensive.
*/
if (!enabled && !has_noconf(config)) {
__superio_enter(sioaddr);
enabled = true;
}
superio_select(sioaddr, PME);
if (!(superio_inb(sioaddr, IT87_ACT_REG) & 0x01)) {
pr_info("Device (chip %s ioreg 0x%x) not activated, skipping\n",
config->model, sioaddr);
goto exit;
}
*address = superio_inw(sioaddr, IT87_BASE_REG) & ~(IT87_EXTENT - 1);
if (*address == 0) {
pr_info("Base address not set (chip %s ioreg 0x%x), skipping\n",
config->model, sioaddr);
goto exit;
}
err = 0;
sio_data->sioaddr = sioaddr;
sio_data->revision = superio_inb(sioaddr, DEVREV) & 0x0f;
pr_info("Found %s chip at 0x%x, revision %d\n",
it87_devices[sio_data->type].model,
*address, sio_data->revision);
/* in7 (VSB or VCCH5V) is always internal on some chips */
if (has_in7_internal(config))
sio_data->internal |= BIT(1);
/* in8 (Vbat) is always internal */
sio_data->internal |= BIT(2);
/* in9 (AVCC3), always internal if supported */
if (has_avcc3(config))
sio_data->internal |= BIT(3); /* in9 is AVCC */
else
sio_data->skip_in |= BIT(9);
if (!has_four_pwm(config))
sio_data->skip_pwm |= BIT(3) | BIT(4) | BIT(5);
else if (!has_five_pwm(config))
sio_data->skip_pwm |= BIT(4) | BIT(5);
else if (!has_six_pwm(config))
sio_data->skip_pwm |= BIT(5);
if (!has_vid(config))
sio_data->skip_vid = 1;
/* Read GPIO config and VID value from LDN 7 (GPIO) */
if (sio_data->type == it87) {
/* The IT8705F has a different LD number for GPIO */
superio_select(sioaddr, 5);
sio_data->beep_pin = superio_inb(sioaddr,
IT87_SIO_BEEP_PIN_REG) & 0x3f;
} else if (sio_data->type == it8783) {
int reg25, reg27, reg2a, reg2c, regef;
superio_select(sioaddr, GPIO);
reg25 = superio_inb(sioaddr, IT87_SIO_GPIO1_REG);
reg27 = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
reg2a = superio_inb(sioaddr, IT87_SIO_PINX1_REG);
reg2c = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
regef = superio_inb(sioaddr, IT87_SIO_SPI_REG);
/* Check if fan3 is there or not */
if ((reg27 & BIT(0)) || !(reg2c & BIT(2)))
sio_data->skip_fan |= BIT(2);
if ((reg25 & BIT(4)) ||
(!(reg2a & BIT(1)) && (regef & BIT(0))))
sio_data->skip_pwm |= BIT(2);
/* Check if fan2 is there or not */
if (reg27 & BIT(7))
sio_data->skip_fan |= BIT(1);
if (reg27 & BIT(3))
sio_data->skip_pwm |= BIT(1);
/* VIN5 */
if ((reg27 & BIT(0)) || (reg2c & BIT(2)))
sio_data->skip_in |= BIT(5); /* No VIN5 */
/* VIN6 */
if (reg27 & BIT(1))
sio_data->skip_in |= BIT(6); /* No VIN6 */
/*
* VIN7
* Does not depend on bit 2 of Reg2C, contrary to datasheet.
*/
if (reg27 & BIT(2)) {
/*
* The data sheet is a bit unclear regarding the
* internal voltage divider for VCCH5V. It says
* "This bit enables and switches VIN7 (pin 91) to the
* internal voltage divider for VCCH5V".
* This is different to other chips, where the internal
* voltage divider would connect VIN7 to an internal
* voltage source. Maybe that is the case here as well.
*
* Since we don't know for sure, re-route it if that is
* not the case, and ask the user to report if the
* resulting voltage is sane.
*/
if (!(reg2c & BIT(1))) {
reg2c |= BIT(1);
superio_outb(sioaddr, IT87_SIO_PINX2_REG,
reg2c);
sio_data->need_in7_reroute = true;
pr_notice("Routing internal VCCH5V to in7.\n");
}
pr_notice("in7 routed to internal voltage divider, with external pin disabled.\n");
pr_notice("Please report if it displays a reasonable voltage.\n");
}
if (reg2c & BIT(0))
sio_data->internal |= BIT(0);
if (reg2c & BIT(1))
sio_data->internal |= BIT(1);
sio_data->beep_pin = superio_inb(sioaddr,
IT87_SIO_BEEP_PIN_REG) & 0x3f;
} else if (sio_data->type == it8603) {
int reg27, reg29;
superio_select(sioaddr, GPIO);
reg27 = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
/* Check if fan3 is there or not */
if (reg27 & BIT(6))
sio_data->skip_pwm |= BIT(2);
if (reg27 & BIT(7))
sio_data->skip_fan |= BIT(2);
/* Check if fan2 is there or not */
reg29 = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
if (reg29 & BIT(1))
sio_data->skip_pwm |= BIT(1);
if (reg29 & BIT(2))
sio_data->skip_fan |= BIT(1);
sio_data->skip_in |= BIT(5); /* No VIN5 */
sio_data->skip_in |= BIT(6); /* No VIN6 */
sio_data->beep_pin = superio_inb(sioaddr,
IT87_SIO_BEEP_PIN_REG) & 0x3f;
} else if (sio_data->type == it8620 || sio_data->type == it8628) {
int reg;
superio_select(sioaddr, GPIO);
/* Check for pwm5 */
reg = superio_inb(sioaddr, IT87_SIO_GPIO1_REG);
if (reg & BIT(6))
sio_data->skip_pwm |= BIT(4);
/* Check for fan4, fan5 */
reg = superio_inb(sioaddr, IT87_SIO_GPIO2_REG);
if (!(reg & BIT(5)))
sio_data->skip_fan |= BIT(3);
if (!(reg & BIT(4)))
sio_data->skip_fan |= BIT(4);
/* Check for pwm3, fan3 */
reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
if (reg & BIT(6))
sio_data->skip_pwm |= BIT(2);
if (reg & BIT(7))
sio_data->skip_fan |= BIT(2);
/* Check for pwm4 */
reg = superio_inb(sioaddr, IT87_SIO_GPIO4_REG);
if (reg & BIT(2))
sio_data->skip_pwm |= BIT(3);
/* Check for pwm2, fan2 */
reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
if (reg & BIT(1))
sio_data->skip_pwm |= BIT(1);
if (reg & BIT(2))
sio_data->skip_fan |= BIT(1);
/* Check for pwm6, fan6 */
if (!(reg & BIT(7))) {
sio_data->skip_pwm |= BIT(5);
sio_data->skip_fan |= BIT(5);
}
/* Check if AVCC is on VIN3 */
reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
if (reg & BIT(0))
sio_data->internal |= BIT(0);
else
sio_data->skip_in |= BIT(9);
sio_data->beep_pin = superio_inb(sioaddr,
IT87_SIO_BEEP_PIN_REG) & 0x3f;
} else if (sio_data->type == it8622) {
int reg;
superio_select(sioaddr, GPIO);
/* Check for pwm4, fan4 */
reg = superio_inb(sioaddr, IT87_SIO_GPIO1_REG);
if (reg & BIT(6))
sio_data->skip_fan |= BIT(3);
if (reg & BIT(5))
sio_data->skip_pwm |= BIT(3);
/* Check for pwm3, fan3, pwm5, fan5 */
reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
if (reg & BIT(6))
sio_data->skip_pwm |= BIT(2);
if (reg & BIT(7))
sio_data->skip_fan |= BIT(2);
if (reg & BIT(3))
sio_data->skip_pwm |= BIT(4);
if (reg & BIT(1))
sio_data->skip_fan |= BIT(4);
/* Check for pwm2, fan2 */
reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
if (reg & BIT(1))
sio_data->skip_pwm |= BIT(1);
if (reg & BIT(2))
sio_data->skip_fan |= BIT(1);
/* Check for AVCC */
reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
if (!(reg & BIT(0)))
sio_data->skip_in |= BIT(9);
sio_data->beep_pin = superio_inb(sioaddr,
IT87_SIO_BEEP_PIN_REG) & 0x3f;
} else if (sio_data->type == it8732) {
int reg;
superio_select(sioaddr, GPIO);
/* Check for pwm2, fan2 */
reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
if (reg & BIT(1))
sio_data->skip_pwm |= BIT(1);
if (reg & BIT(2))
sio_data->skip_fan |= BIT(1);
/* Check for pwm3, fan3, fan4 */
reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
if (reg & BIT(6))
sio_data->skip_pwm |= BIT(2);
if (reg & BIT(7))
sio_data->skip_fan |= BIT(2);
if (reg & BIT(5))
sio_data->skip_fan |= BIT(3);
/* Check if AVCC is on VIN3 */
reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
if (reg & BIT(0))
sio_data->internal |= BIT(0);
sio_data->beep_pin = superio_inb(sioaddr,
IT87_SIO_BEEP_PIN_REG) & 0x3f;
} else {
int reg;
bool uart6;
superio_select(sioaddr, GPIO);
/* Check for fan4, fan5 */
if (has_five_fans(config)) {
reg = superio_inb(sioaddr, IT87_SIO_GPIO2_REG);
switch (sio_data->type) {
case it8718:
if (reg & BIT(5))
sio_data->skip_fan |= BIT(3);
if (reg & BIT(4))
sio_data->skip_fan |= BIT(4);
break;
case it8720:
case it8721:
case it8728:
if (!(reg & BIT(5)))
sio_data->skip_fan |= BIT(3);
if (!(reg & BIT(4)))
sio_data->skip_fan |= BIT(4);
break;
default:
break;
}
}
reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
if (!sio_data->skip_vid) {
/* We need at least 4 VID pins */
if (reg & 0x0f) {
pr_info("VID is disabled (pins used for GPIO)\n");
sio_data->skip_vid = 1;
}
}
/* Check if fan3 is there or not */
if (reg & BIT(6))
sio_data->skip_pwm |= BIT(2);
if (reg & BIT(7))
sio_data->skip_fan |= BIT(2);
/* Check if fan2 is there or not */
reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
if (reg & BIT(1))
sio_data->skip_pwm |= BIT(1);
if (reg & BIT(2))
sio_data->skip_fan |= BIT(1);
if ((sio_data->type == it8718 || sio_data->type == it8720) &&
!(sio_data->skip_vid))
sio_data->vid_value = superio_inb(sioaddr,
IT87_SIO_VID_REG);
reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
uart6 = sio_data->type == it8782 && (reg & BIT(2));
/*
* The IT8720F has no VIN7 pin, so VCCH5V should always be
* routed internally to VIN7 with an internal divider.
* Curiously, there still is a configuration bit to control
* this, which means it can be set incorrectly. And even
* more curiously, many boards out there are improperly
* configured, even though the IT8720F datasheet claims
* that the internal routing of VCCH5V to VIN7 is the default
* setting. So we force the internal routing in this case.
*
* On IT8782F, VIN7 is multiplexed with one of the UART6 pins.
* If UART6 is enabled, re-route VIN7 to the internal divider
* if that is not already the case.
*/
if ((sio_data->type == it8720 || uart6) && !(reg & BIT(1))) {
reg |= BIT(1);
superio_outb(sioaddr, IT87_SIO_PINX2_REG, reg);
sio_data->need_in7_reroute = true;
pr_notice("Routing internal VCCH5V to in7\n");
}
if (reg & BIT(0))
sio_data->internal |= BIT(0);
if (reg & BIT(1))
sio_data->internal |= BIT(1);
/*
* On IT8782F, UART6 pins overlap with VIN5, VIN6, and VIN7.
* While VIN7 can be routed to the internal voltage divider,
* VIN5 and VIN6 are not available if UART6 is enabled.
*
* Also, temp3 is not available if UART6 is enabled and TEMPIN3
* is the temperature source. Since we can not read the
* temperature source here, skip_temp is preliminary.
*/
if (uart6) {
sio_data->skip_in |= BIT(5) | BIT(6);
sio_data->skip_temp |= BIT(2);
}
sio_data->beep_pin = superio_inb(sioaddr,
IT87_SIO_BEEP_PIN_REG) & 0x3f;
}
if (sio_data->beep_pin)
pr_info("Beeping is supported\n");
/* Set values based on DMI matches */
if (dmi_data)
sio_data->skip_pwm |= dmi_data->skip_pwm;
if (config->smbus_bitmap) {
u8 reg;
superio_select(sioaddr, PME);
reg = superio_inb(sioaddr, IT87_SPECIAL_CFG_REG);
sio_data->ec_special_config = reg;
sio_data->smbus_bitmap = reg & config->smbus_bitmap;
}
exit:
superio_exit(sioaddr, !enabled);
return err;
}
/*
* Some chips seem to have default value 0xff for all limit
* registers. For low voltage limits it makes no sense and triggers
* alarms, so change to 0 instead. For high temperature limits, it
* means -1 degree C, which surprisingly doesn't trigger an alarm,
* but is still confusing, so change to 127 degrees C.
*/
static void it87_check_limit_regs(struct it87_data *data)
{
int i, reg;
for (i = 0; i < NUM_VIN_LIMIT; i++) {
reg = it87_read_value(data, IT87_REG_VIN_MIN(i));
if (reg == 0xff)
it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
}
for (i = 0; i < NUM_TEMP_LIMIT; i++) {
reg = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
if (reg == 0xff)
it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
}
}
/* Check if voltage monitors are reset manually or by some reason */
static void it87_check_voltage_monitors_reset(struct it87_data *data)
{
int reg;
reg = it87_read_value(data, IT87_REG_VIN_ENABLE);
if ((reg & 0xff) == 0) {
/* Enable all voltage monitors */
it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
}
}
/* Check if tachometers are reset manually or by some reason */
static void it87_check_tachometers_reset(struct platform_device *pdev)
{
struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev);
struct it87_data *data = platform_get_drvdata(pdev);
u8 mask, fan_main_ctrl;
mask = 0x70 & ~(sio_data->skip_fan << 4);
fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
if ((fan_main_ctrl & mask) == 0) {
/* Enable all fan tachometers */
fan_main_ctrl |= mask;
it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
fan_main_ctrl);
}
}
/* Set tachometers to 16-bit mode if needed */
static void it87_check_tachometers_16bit_mode(struct platform_device *pdev)
{
struct it87_data *data = platform_get_drvdata(pdev);
int reg;
if (!has_fan16_config(data))
return;
reg = it87_read_value(data, IT87_REG_FAN_16BIT);
if (~reg & 0x07 & data->has_fan) {
dev_dbg(&pdev->dev,
"Setting fan1-3 to 16-bit mode\n");
it87_write_value(data, IT87_REG_FAN_16BIT,
reg | 0x07);
}
}
static void it87_start_monitoring(struct it87_data *data)
{
it87_write_value(data, IT87_REG_CONFIG,
(it87_read_value(data, IT87_REG_CONFIG) & 0x3e)
| (update_vbat ? 0x41 : 0x01));
}
/* Called when we have found a new IT87. */
static void it87_init_device(struct platform_device *pdev)
{
struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev);
struct it87_data *data = platform_get_drvdata(pdev);
int tmp, i;
/*
* For each PWM channel:
* - If it is in automatic mode, setting to manual mode should set
* the fan to full speed by default.
* - If it is in manual mode, we need a mapping to temperature
* channels to use when later setting to automatic mode later.
* Use a 1:1 mapping by default (we are clueless.)
* In both cases, the value can (and should) be changed by the user
* prior to switching to a different mode.
* Note that this is no longer needed for the IT8721F and later, as
* these have separate registers for the temperature mapping and the
* manual duty cycle.
*/
for (i = 0; i < NUM_AUTO_PWM; i++) {
data->pwm_temp_map[i] = i;
data->pwm_duty[i] = 0x7f; /* Full speed */
data->auto_pwm[i][3] = 0x7f; /* Full speed, hard-coded */
}
it87_check_limit_regs(data);
/*
* Temperature channels are not forcibly enabled, as they can be
* set to two different sensor types and we can't guess which one
* is correct for a given system. These channels can be enabled at
* run-time through the temp{1-3}_type sysfs accessors if needed.
*/
it87_check_voltage_monitors_reset(data);
it87_check_tachometers_reset(pdev);
data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
it87_check_tachometers_16bit_mode(pdev);
/* Check for additional fans */
tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
if (has_four_fans(data) && (tmp & BIT(4)))
data->has_fan |= BIT(3); /* fan4 enabled */
if (has_five_fans(data) && (tmp & BIT(5)))
data->has_fan |= BIT(4); /* fan5 enabled */
if (has_six_fans(data) && (tmp & BIT(2)))
data->has_fan |= BIT(5); /* fan6 enabled */
/* Fan input pins may be used for alternative functions */
data->has_fan &= ~sio_data->skip_fan;
/* Check if pwm5, pwm6 are enabled */
if (has_six_pwm(data)) {
/* The following code may be IT8620E specific */
tmp = it87_read_value(data, IT87_REG_FAN_DIV);
if ((tmp & 0xc0) == 0xc0)
sio_data->skip_pwm |= BIT(4);
if (!(tmp & BIT(3)))
sio_data->skip_pwm |= BIT(5);
}
it87_start_monitoring(data);
}
/* Return 1 if and only if the PWM interface is safe to use */
static int it87_check_pwm(struct device *dev)
{
struct it87_data *data = dev_get_drvdata(dev);
/*
* Some BIOSes fail to correctly configure the IT87 fans. All fans off
* and polarity set to active low is sign that this is the case so we
* disable pwm control to protect the user.
*/
int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
if ((tmp & 0x87) == 0) {
if (fix_pwm_polarity) {
/*
* The user asks us to attempt a chip reconfiguration.
* This means switching to active high polarity and
* inverting all fan speed values.
*/
int i;
u8 pwm[3];
for (i = 0; i < ARRAY_SIZE(pwm); i++)
pwm[i] = it87_read_value(data,
IT87_REG_PWM[i]);
/*
* If any fan is in automatic pwm mode, the polarity
* might be correct, as suspicious as it seems, so we
* better don't change anything (but still disable the
* PWM interface).
*/
if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
dev_info(dev,
"Reconfiguring PWM to active high polarity\n");
it87_write_value(data, IT87_REG_FAN_CTL,
tmp | 0x87);
for (i = 0; i < 3; i++)
it87_write_value(data,
IT87_REG_PWM[i],
0x7f & ~pwm[i]);
return 1;
}
dev_info(dev,
"PWM configuration is too broken to be fixed\n");
}
return 0;
} else if (fix_pwm_polarity) {
dev_info(dev,
"PWM configuration looks sane, won't touch\n");
}
return 1;
}
static int it87_probe(struct platform_device *pdev)
{
struct it87_data *data;
struct resource *res;
struct device *dev = &pdev->dev;
struct it87_sio_data *sio_data = dev_get_platdata(dev);
int enable_pwm_interface;
struct device *hwmon_dev;
int err;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!devm_request_region(&pdev->dev, res->start, IT87_EC_EXTENT,
DRVNAME)) {
dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
(unsigned long)res->start,
(unsigned long)(res->start + IT87_EC_EXTENT - 1));
return -EBUSY;
}
data = devm_kzalloc(&pdev->dev, sizeof(struct it87_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->addr = res->start;
data->sioaddr = sio_data->sioaddr;
data->type = sio_data->type;
data->smbus_bitmap = sio_data->smbus_bitmap;
data->ec_special_config = sio_data->ec_special_config;
data->features = it87_devices[sio_data->type].features;
data->peci_mask = it87_devices[sio_data->type].peci_mask;
data->old_peci_mask = it87_devices[sio_data->type].old_peci_mask;
/*
* IT8705F Datasheet 0.4.1, 3h == Version G.
* IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
* These are the first revisions with 16-bit tachometer support.
*/
switch (data->type) {
case it87:
if (sio_data->revision >= 0x03) {
data->features &= ~FEAT_OLD_AUTOPWM;
data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS;
}
break;
case it8712:
if (sio_data->revision >= 0x08) {
data->features &= ~FEAT_OLD_AUTOPWM;
data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS |
FEAT_FIVE_FANS;
}
break;
default:
break;
}
platform_set_drvdata(pdev, data);
mutex_init(&data->update_lock);
err = smbus_disable(data);
if (err)
return err;
/* Now, we do the remaining detection. */
if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80) ||
it87_read_value(data, IT87_REG_CHIPID) != 0x90) {
smbus_enable(data);
return -ENODEV;
}
/* Check PWM configuration */
enable_pwm_interface = it87_check_pwm(dev);
if (!enable_pwm_interface)
dev_info(dev,
"Detected broken BIOS defaults, disabling PWM interface\n");
/* Starting with IT8721F, we handle scaling of internal voltages */
if (has_scaling(data)) {
if (sio_data->internal & BIT(0))
data->in_scaled |= BIT(3); /* in3 is AVCC */
if (sio_data->internal & BIT(1))
data->in_scaled |= BIT(7); /* in7 is VSB */
if (sio_data->internal & BIT(2))
data->in_scaled |= BIT(8); /* in8 is Vbat */
if (sio_data->internal & BIT(3))
data->in_scaled |= BIT(9); /* in9 is AVCC */
} else if (sio_data->type == it8781 || sio_data->type == it8782 ||
sio_data->type == it8783) {
if (sio_data->internal & BIT(0))
data->in_scaled |= BIT(3); /* in3 is VCC5V */
if (sio_data->internal & BIT(1))
data->in_scaled |= BIT(7); /* in7 is VCCH5V */
}
data->has_temp = 0x07;
if (sio_data->skip_temp & BIT(2)) {
if (sio_data->type == it8782 &&
!(it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x80))
data->has_temp &= ~BIT(2);
}
data->in_internal = sio_data->internal;
data->need_in7_reroute = sio_data->need_in7_reroute;
data->has_in = 0x3ff & ~sio_data->skip_in;
if (has_four_temp(data)) {
data->has_temp |= BIT(3);
} else if (has_six_temp(data)) {
u8 reg = it87_read_value(data, IT87_REG_TEMP456_ENABLE);
/* Check for additional temperature sensors */
if ((reg & 0x03) >= 0x02)
data->has_temp |= BIT(3);
if (((reg >> 2) & 0x03) >= 0x02)
data->has_temp |= BIT(4);
if (((reg >> 4) & 0x03) >= 0x02)
data->has_temp |= BIT(5);
/* Check for additional voltage sensors */
if ((reg & 0x03) == 0x01)
data->has_in |= BIT(10);
if (((reg >> 2) & 0x03) == 0x01)
data->has_in |= BIT(11);
if (((reg >> 4) & 0x03) == 0x01)
data->has_in |= BIT(12);
}
data->has_beep = !!sio_data->beep_pin;
/* Initialize the IT87 chip */
it87_init_device(pdev);
smbus_enable(data);
if (!sio_data->skip_vid) {
data->has_vid = true;
data->vrm = vid_which_vrm();
/* VID reading from Super-I/O config space if available */
data->vid = sio_data->vid_value;
}
/* Prepare for sysfs hooks */
data->groups[0] = &it87_group;
data->groups[1] = &it87_group_in;
data->groups[2] = &it87_group_temp;
data->groups[3] = &it87_group_fan;
if (enable_pwm_interface) {
data->has_pwm = BIT(ARRAY_SIZE(IT87_REG_PWM)) - 1;
data->has_pwm &= ~sio_data->skip_pwm;
data->groups[4] = &it87_group_pwm;
if (has_old_autopwm(data) || has_newer_autopwm(data))
data->groups[5] = &it87_group_auto_pwm;
}
hwmon_dev = devm_hwmon_device_register_with_groups(dev,
it87_devices[sio_data->type].name,
data, data->groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static void it87_resume_sio(struct platform_device *pdev)
{
struct it87_data *data = dev_get_drvdata(&pdev->dev);
int err;
int reg2c;
if (!data->need_in7_reroute)
return;
err = superio_enter(data->sioaddr, has_noconf(data));
if (err) {
dev_warn(&pdev->dev,
"Unable to enter Super I/O to reroute in7 (%d)",
err);
return;
}
superio_select(data->sioaddr, GPIO);
reg2c = superio_inb(data->sioaddr, IT87_SIO_PINX2_REG);
if (!(reg2c & BIT(1))) {
dev_dbg(&pdev->dev,
"Routing internal VCCH5V to in7 again");
reg2c |= BIT(1);
superio_outb(data->sioaddr, IT87_SIO_PINX2_REG,
reg2c);
}
superio_exit(data->sioaddr, has_noconf(data));
}
static int it87_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct it87_data *data = dev_get_drvdata(dev);
it87_resume_sio(pdev);
it87_lock(data);
it87_check_pwm(dev);
it87_check_limit_regs(data);
it87_check_voltage_monitors_reset(data);
it87_check_tachometers_reset(pdev);
it87_check_tachometers_16bit_mode(pdev);
it87_start_monitoring(data);
/* force update */
data->valid = false;
it87_unlock(data);
it87_update_device(dev);
return 0;
}
static DEFINE_SIMPLE_DEV_PM_OPS(it87_dev_pm_ops, NULL, it87_resume);
static struct platform_driver it87_driver = {
.driver = {
.name = DRVNAME,
.pm = pm_sleep_ptr(&it87_dev_pm_ops),
},
.probe = it87_probe,
};
static int __init it87_device_add(int index, unsigned short address,
const struct it87_sio_data *sio_data)
{
struct platform_device *pdev;
struct resource res = {
.start = address + IT87_EC_OFFSET,
.end = address + IT87_EC_OFFSET + IT87_EC_EXTENT - 1,
.name = DRVNAME,
.flags = IORESOURCE_IO,
};
int err;
err = acpi_check_resource_conflict(&res);
if (err) {
if (!ignore_resource_conflict)
return err;
}
pdev = platform_device_alloc(DRVNAME, address);
if (!pdev)
return -ENOMEM;
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add_data(pdev, sio_data,
sizeof(struct it87_sio_data));
if (err) {
pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
it87_pdev[index] = pdev;
return 0;
exit_device_put:
platform_device_put(pdev);
return err;
}
/* callback function for DMI */
static int it87_dmi_cb(const struct dmi_system_id *dmi_entry)
{
dmi_data = dmi_entry->driver_data;
if (dmi_data && dmi_data->skip_pwm)
pr_info("Disabling pwm2 due to hardware constraints\n");
return 1;
}
/*
* On the Shuttle SN68PT, FAN_CTL2 is apparently not
* connected to a fan, but to something else. One user
* has reported instant system power-off when changing
* the PWM2 duty cycle, so we disable it.
* I use the board name string as the trigger in case
* the same board is ever used in other systems.
*/
static struct it87_dmi_data nvidia_fn68pt = {
.skip_pwm = BIT(1),
};
#define IT87_DMI_MATCH_VND(vendor, name, cb, data) \
{ \
.callback = cb, \
.matches = { \
DMI_EXACT_MATCH(DMI_BOARD_VENDOR, vendor), \
DMI_EXACT_MATCH(DMI_BOARD_NAME, name), \
}, \
.driver_data = data, \
}
static const struct dmi_system_id it87_dmi_table[] __initconst = {
IT87_DMI_MATCH_VND("nVIDIA", "FN68PT", it87_dmi_cb, &nvidia_fn68pt),
{ }
};
MODULE_DEVICE_TABLE(dmi, it87_dmi_table);
static int __init sm_it87_init(void)
{
int sioaddr[2] = { REG_2E, REG_4E };
struct it87_sio_data sio_data;
unsigned short isa_address[2];
bool found = false;
int i, err;
err = platform_driver_register(&it87_driver);
if (err)
return err;
dmi_check_system(it87_dmi_table);
for (i = 0; i < ARRAY_SIZE(sioaddr); i++) {
memset(&sio_data, 0, sizeof(struct it87_sio_data));
isa_address[i] = 0;
err = it87_find(sioaddr[i], &isa_address[i], &sio_data, i);
if (err || isa_address[i] == 0)
continue;
/*
* Don't register second chip if its ISA address matches
* the first chip's ISA address.
*/
if (i && isa_address[i] == isa_address[0])
break;
err = it87_device_add(i, isa_address[i], &sio_data);
if (err)
goto exit_dev_unregister;
found = true;
/*
* IT8705F may respond on both SIO addresses.
* Stop probing after finding one.
*/
if (sio_data.type == it87)
break;
}
if (!found) {
err = -ENODEV;
goto exit_unregister;
}
return 0;
exit_dev_unregister:
/* NULL check handled by platform_device_unregister */
platform_device_unregister(it87_pdev[0]);
exit_unregister:
platform_driver_unregister(&it87_driver);
return err;
}
static void __exit sm_it87_exit(void)
{
/* NULL check handled by platform_device_unregister */
platform_device_unregister(it87_pdev[1]);
platform_device_unregister(it87_pdev[0]);
platform_driver_unregister(&it87_driver);
}
MODULE_AUTHOR("Chris Gauthron, Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("IT8705F/IT871xF/IT872xF hardware monitoring driver");
module_param_array(force_id, ushort, &force_id_cnt, 0);
MODULE_PARM_DESC(force_id, "Override one or more detected device ID(s)");
module_param(ignore_resource_conflict, bool, 0);
MODULE_PARM_DESC(ignore_resource_conflict, "Ignore ACPI resource conflict");
module_param(update_vbat, bool, 0);
MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
module_param(fix_pwm_polarity, bool, 0);
MODULE_PARM_DESC(fix_pwm_polarity,
"Force PWM polarity to active high (DANGEROUS)");
MODULE_LICENSE("GPL");
module_init(sm_it87_init);
module_exit(sm_it87_exit);