mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-23 12:14:10 +08:00
7d6ef7550a
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230919133207.1400430-47-u.kleine-koenig@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
1503 lines
41 KiB
C
1503 lines
41 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2013-2014 Allwinner Tech Co., Ltd
|
|
* Author: Sugar <shuge@allwinnertech.com>
|
|
*
|
|
* Copyright (C) 2014 Maxime Ripard
|
|
* Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "virt-dma.h"
|
|
|
|
/*
|
|
* Common registers
|
|
*/
|
|
#define DMA_IRQ_EN(x) ((x) * 0x04)
|
|
#define DMA_IRQ_HALF BIT(0)
|
|
#define DMA_IRQ_PKG BIT(1)
|
|
#define DMA_IRQ_QUEUE BIT(2)
|
|
|
|
#define DMA_IRQ_CHAN_NR 8
|
|
#define DMA_IRQ_CHAN_WIDTH 4
|
|
|
|
|
|
#define DMA_IRQ_STAT(x) ((x) * 0x04 + 0x10)
|
|
|
|
#define DMA_STAT 0x30
|
|
|
|
/* Offset between DMA_IRQ_EN and DMA_IRQ_STAT limits number of channels */
|
|
#define DMA_MAX_CHANNELS (DMA_IRQ_CHAN_NR * 0x10 / 4)
|
|
|
|
/*
|
|
* sun8i specific registers
|
|
*/
|
|
#define SUN8I_DMA_GATE 0x20
|
|
#define SUN8I_DMA_GATE_ENABLE 0x4
|
|
|
|
#define SUNXI_H3_SECURE_REG 0x20
|
|
#define SUNXI_H3_DMA_GATE 0x28
|
|
#define SUNXI_H3_DMA_GATE_ENABLE 0x4
|
|
/*
|
|
* Channels specific registers
|
|
*/
|
|
#define DMA_CHAN_ENABLE 0x00
|
|
#define DMA_CHAN_ENABLE_START BIT(0)
|
|
#define DMA_CHAN_ENABLE_STOP 0
|
|
|
|
#define DMA_CHAN_PAUSE 0x04
|
|
#define DMA_CHAN_PAUSE_PAUSE BIT(1)
|
|
#define DMA_CHAN_PAUSE_RESUME 0
|
|
|
|
#define DMA_CHAN_LLI_ADDR 0x08
|
|
|
|
#define DMA_CHAN_CUR_CFG 0x0c
|
|
#define DMA_CHAN_MAX_DRQ_A31 0x1f
|
|
#define DMA_CHAN_MAX_DRQ_H6 0x3f
|
|
#define DMA_CHAN_CFG_SRC_DRQ_A31(x) ((x) & DMA_CHAN_MAX_DRQ_A31)
|
|
#define DMA_CHAN_CFG_SRC_DRQ_H6(x) ((x) & DMA_CHAN_MAX_DRQ_H6)
|
|
#define DMA_CHAN_CFG_SRC_MODE_A31(x) (((x) & 0x1) << 5)
|
|
#define DMA_CHAN_CFG_SRC_MODE_H6(x) (((x) & 0x1) << 8)
|
|
#define DMA_CHAN_CFG_SRC_BURST_A31(x) (((x) & 0x3) << 7)
|
|
#define DMA_CHAN_CFG_SRC_BURST_H3(x) (((x) & 0x3) << 6)
|
|
#define DMA_CHAN_CFG_SRC_WIDTH(x) (((x) & 0x3) << 9)
|
|
|
|
#define DMA_CHAN_CFG_DST_DRQ_A31(x) (DMA_CHAN_CFG_SRC_DRQ_A31(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_DRQ_H6(x) (DMA_CHAN_CFG_SRC_DRQ_H6(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_MODE_A31(x) (DMA_CHAN_CFG_SRC_MODE_A31(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_MODE_H6(x) (DMA_CHAN_CFG_SRC_MODE_H6(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_BURST_A31(x) (DMA_CHAN_CFG_SRC_BURST_A31(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_BURST_H3(x) (DMA_CHAN_CFG_SRC_BURST_H3(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_WIDTH(x) (DMA_CHAN_CFG_SRC_WIDTH(x) << 16)
|
|
|
|
#define DMA_CHAN_CUR_SRC 0x10
|
|
|
|
#define DMA_CHAN_CUR_DST 0x14
|
|
|
|
#define DMA_CHAN_CUR_CNT 0x18
|
|
|
|
#define DMA_CHAN_CUR_PARA 0x1c
|
|
|
|
/*
|
|
* LLI address mangling
|
|
*
|
|
* The LLI link physical address is also mangled, but we avoid dealing
|
|
* with that by allocating LLIs from the DMA32 zone.
|
|
*/
|
|
#define SRC_HIGH_ADDR(x) (((x) & 0x3U) << 16)
|
|
#define DST_HIGH_ADDR(x) (((x) & 0x3U) << 18)
|
|
|
|
/*
|
|
* Various hardware related defines
|
|
*/
|
|
#define LLI_LAST_ITEM 0xfffff800
|
|
#define NORMAL_WAIT 8
|
|
#define DRQ_SDRAM 1
|
|
#define LINEAR_MODE 0
|
|
#define IO_MODE 1
|
|
|
|
/* forward declaration */
|
|
struct sun6i_dma_dev;
|
|
|
|
/*
|
|
* Hardware channels / ports representation
|
|
*
|
|
* The hardware is used in several SoCs, with differing numbers
|
|
* of channels and endpoints. This structure ties those numbers
|
|
* to a certain compatible string.
|
|
*/
|
|
struct sun6i_dma_config {
|
|
u32 nr_max_channels;
|
|
u32 nr_max_requests;
|
|
u32 nr_max_vchans;
|
|
/*
|
|
* In the datasheets/user manuals of newer Allwinner SoCs, a special
|
|
* bit (bit 2 at register 0x20) is present.
|
|
* It's named "DMA MCLK interface circuit auto gating bit" in the
|
|
* documents, and the footnote of this register says that this bit
|
|
* should be set up when initializing the DMA controller.
|
|
* Allwinner A23/A33 user manuals do not have this bit documented,
|
|
* however these SoCs really have and need this bit, as seen in the
|
|
* BSP kernel source code.
|
|
*/
|
|
void (*clock_autogate_enable)(struct sun6i_dma_dev *);
|
|
void (*set_burst_length)(u32 *p_cfg, s8 src_burst, s8 dst_burst);
|
|
void (*set_drq)(u32 *p_cfg, s8 src_drq, s8 dst_drq);
|
|
void (*set_mode)(u32 *p_cfg, s8 src_mode, s8 dst_mode);
|
|
u32 src_burst_lengths;
|
|
u32 dst_burst_lengths;
|
|
u32 src_addr_widths;
|
|
u32 dst_addr_widths;
|
|
bool has_high_addr;
|
|
bool has_mbus_clk;
|
|
};
|
|
|
|
/*
|
|
* Hardware representation of the LLI
|
|
*
|
|
* The hardware will be fed the physical address of this structure,
|
|
* and read its content in order to start the transfer.
|
|
*/
|
|
struct sun6i_dma_lli {
|
|
u32 cfg;
|
|
u32 src;
|
|
u32 dst;
|
|
u32 len;
|
|
u32 para;
|
|
u32 p_lli_next;
|
|
|
|
/*
|
|
* This field is not used by the DMA controller, but will be
|
|
* used by the CPU to go through the list (mostly for dumping
|
|
* or freeing it).
|
|
*/
|
|
struct sun6i_dma_lli *v_lli_next;
|
|
};
|
|
|
|
|
|
struct sun6i_desc {
|
|
struct virt_dma_desc vd;
|
|
dma_addr_t p_lli;
|
|
struct sun6i_dma_lli *v_lli;
|
|
};
|
|
|
|
struct sun6i_pchan {
|
|
u32 idx;
|
|
void __iomem *base;
|
|
struct sun6i_vchan *vchan;
|
|
struct sun6i_desc *desc;
|
|
struct sun6i_desc *done;
|
|
};
|
|
|
|
struct sun6i_vchan {
|
|
struct virt_dma_chan vc;
|
|
struct list_head node;
|
|
struct dma_slave_config cfg;
|
|
struct sun6i_pchan *phy;
|
|
u8 port;
|
|
u8 irq_type;
|
|
bool cyclic;
|
|
};
|
|
|
|
struct sun6i_dma_dev {
|
|
struct dma_device slave;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct clk *clk_mbus;
|
|
int irq;
|
|
spinlock_t lock;
|
|
struct reset_control *rstc;
|
|
struct tasklet_struct task;
|
|
atomic_t tasklet_shutdown;
|
|
struct list_head pending;
|
|
struct dma_pool *pool;
|
|
struct sun6i_pchan *pchans;
|
|
struct sun6i_vchan *vchans;
|
|
const struct sun6i_dma_config *cfg;
|
|
u32 num_pchans;
|
|
u32 num_vchans;
|
|
u32 max_request;
|
|
};
|
|
|
|
static struct device *chan2dev(struct dma_chan *chan)
|
|
{
|
|
return &chan->dev->device;
|
|
}
|
|
|
|
static inline struct sun6i_dma_dev *to_sun6i_dma_dev(struct dma_device *d)
|
|
{
|
|
return container_of(d, struct sun6i_dma_dev, slave);
|
|
}
|
|
|
|
static inline struct sun6i_vchan *to_sun6i_vchan(struct dma_chan *chan)
|
|
{
|
|
return container_of(chan, struct sun6i_vchan, vc.chan);
|
|
}
|
|
|
|
static inline struct sun6i_desc *
|
|
to_sun6i_desc(struct dma_async_tx_descriptor *tx)
|
|
{
|
|
return container_of(tx, struct sun6i_desc, vd.tx);
|
|
}
|
|
|
|
static inline void sun6i_dma_dump_com_regs(struct sun6i_dma_dev *sdev)
|
|
{
|
|
dev_dbg(sdev->slave.dev, "Common register:\n"
|
|
"\tmask0(%04x): 0x%08x\n"
|
|
"\tmask1(%04x): 0x%08x\n"
|
|
"\tpend0(%04x): 0x%08x\n"
|
|
"\tpend1(%04x): 0x%08x\n"
|
|
"\tstats(%04x): 0x%08x\n",
|
|
DMA_IRQ_EN(0), readl(sdev->base + DMA_IRQ_EN(0)),
|
|
DMA_IRQ_EN(1), readl(sdev->base + DMA_IRQ_EN(1)),
|
|
DMA_IRQ_STAT(0), readl(sdev->base + DMA_IRQ_STAT(0)),
|
|
DMA_IRQ_STAT(1), readl(sdev->base + DMA_IRQ_STAT(1)),
|
|
DMA_STAT, readl(sdev->base + DMA_STAT));
|
|
}
|
|
|
|
static inline void sun6i_dma_dump_chan_regs(struct sun6i_dma_dev *sdev,
|
|
struct sun6i_pchan *pchan)
|
|
{
|
|
dev_dbg(sdev->slave.dev, "Chan %d reg:\n"
|
|
"\t___en(%04x): \t0x%08x\n"
|
|
"\tpause(%04x): \t0x%08x\n"
|
|
"\tstart(%04x): \t0x%08x\n"
|
|
"\t__cfg(%04x): \t0x%08x\n"
|
|
"\t__src(%04x): \t0x%08x\n"
|
|
"\t__dst(%04x): \t0x%08x\n"
|
|
"\tcount(%04x): \t0x%08x\n"
|
|
"\t_para(%04x): \t0x%08x\n\n",
|
|
pchan->idx,
|
|
DMA_CHAN_ENABLE,
|
|
readl(pchan->base + DMA_CHAN_ENABLE),
|
|
DMA_CHAN_PAUSE,
|
|
readl(pchan->base + DMA_CHAN_PAUSE),
|
|
DMA_CHAN_LLI_ADDR,
|
|
readl(pchan->base + DMA_CHAN_LLI_ADDR),
|
|
DMA_CHAN_CUR_CFG,
|
|
readl(pchan->base + DMA_CHAN_CUR_CFG),
|
|
DMA_CHAN_CUR_SRC,
|
|
readl(pchan->base + DMA_CHAN_CUR_SRC),
|
|
DMA_CHAN_CUR_DST,
|
|
readl(pchan->base + DMA_CHAN_CUR_DST),
|
|
DMA_CHAN_CUR_CNT,
|
|
readl(pchan->base + DMA_CHAN_CUR_CNT),
|
|
DMA_CHAN_CUR_PARA,
|
|
readl(pchan->base + DMA_CHAN_CUR_PARA));
|
|
}
|
|
|
|
static inline s8 convert_burst(u32 maxburst)
|
|
{
|
|
switch (maxburst) {
|
|
case 1:
|
|
return 0;
|
|
case 4:
|
|
return 1;
|
|
case 8:
|
|
return 2;
|
|
case 16:
|
|
return 3;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
|
|
{
|
|
return ilog2(addr_width);
|
|
}
|
|
|
|
static void sun6i_enable_clock_autogate_a23(struct sun6i_dma_dev *sdev)
|
|
{
|
|
writel(SUN8I_DMA_GATE_ENABLE, sdev->base + SUN8I_DMA_GATE);
|
|
}
|
|
|
|
static void sun6i_enable_clock_autogate_h3(struct sun6i_dma_dev *sdev)
|
|
{
|
|
writel(SUNXI_H3_DMA_GATE_ENABLE, sdev->base + SUNXI_H3_DMA_GATE);
|
|
}
|
|
|
|
static void sun6i_set_burst_length_a31(u32 *p_cfg, s8 src_burst, s8 dst_burst)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_BURST_A31(src_burst) |
|
|
DMA_CHAN_CFG_DST_BURST_A31(dst_burst);
|
|
}
|
|
|
|
static void sun6i_set_burst_length_h3(u32 *p_cfg, s8 src_burst, s8 dst_burst)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_BURST_H3(src_burst) |
|
|
DMA_CHAN_CFG_DST_BURST_H3(dst_burst);
|
|
}
|
|
|
|
static void sun6i_set_drq_a31(u32 *p_cfg, s8 src_drq, s8 dst_drq)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_DRQ_A31(src_drq) |
|
|
DMA_CHAN_CFG_DST_DRQ_A31(dst_drq);
|
|
}
|
|
|
|
static void sun6i_set_drq_h6(u32 *p_cfg, s8 src_drq, s8 dst_drq)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_DRQ_H6(src_drq) |
|
|
DMA_CHAN_CFG_DST_DRQ_H6(dst_drq);
|
|
}
|
|
|
|
static void sun6i_set_mode_a31(u32 *p_cfg, s8 src_mode, s8 dst_mode)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_MODE_A31(src_mode) |
|
|
DMA_CHAN_CFG_DST_MODE_A31(dst_mode);
|
|
}
|
|
|
|
static void sun6i_set_mode_h6(u32 *p_cfg, s8 src_mode, s8 dst_mode)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_MODE_H6(src_mode) |
|
|
DMA_CHAN_CFG_DST_MODE_H6(dst_mode);
|
|
}
|
|
|
|
static size_t sun6i_get_chan_size(struct sun6i_pchan *pchan)
|
|
{
|
|
struct sun6i_desc *txd = pchan->desc;
|
|
struct sun6i_dma_lli *lli;
|
|
size_t bytes;
|
|
dma_addr_t pos;
|
|
|
|
pos = readl(pchan->base + DMA_CHAN_LLI_ADDR);
|
|
bytes = readl(pchan->base + DMA_CHAN_CUR_CNT);
|
|
|
|
if (pos == LLI_LAST_ITEM)
|
|
return bytes;
|
|
|
|
for (lli = txd->v_lli; lli; lli = lli->v_lli_next) {
|
|
if (lli->p_lli_next == pos) {
|
|
for (lli = lli->v_lli_next; lli; lli = lli->v_lli_next)
|
|
bytes += lli->len;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return bytes;
|
|
}
|
|
|
|
static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev,
|
|
struct sun6i_dma_lli *next,
|
|
dma_addr_t next_phy,
|
|
struct sun6i_desc *txd)
|
|
{
|
|
if ((!prev && !txd) || !next)
|
|
return NULL;
|
|
|
|
if (!prev) {
|
|
txd->p_lli = next_phy;
|
|
txd->v_lli = next;
|
|
} else {
|
|
prev->p_lli_next = next_phy;
|
|
prev->v_lli_next = next;
|
|
}
|
|
|
|
next->p_lli_next = LLI_LAST_ITEM;
|
|
next->v_lli_next = NULL;
|
|
|
|
return next;
|
|
}
|
|
|
|
static inline void sun6i_dma_dump_lli(struct sun6i_vchan *vchan,
|
|
struct sun6i_dma_lli *v_lli,
|
|
dma_addr_t p_lli)
|
|
{
|
|
dev_dbg(chan2dev(&vchan->vc.chan),
|
|
"\n\tdesc:\tp - %pad v - 0x%p\n"
|
|
"\t\tc - 0x%08x s - 0x%08x d - 0x%08x\n"
|
|
"\t\tl - 0x%08x p - 0x%08x n - 0x%08x\n",
|
|
&p_lli, v_lli,
|
|
v_lli->cfg, v_lli->src, v_lli->dst,
|
|
v_lli->len, v_lli->para, v_lli->p_lli_next);
|
|
}
|
|
|
|
static void sun6i_dma_free_desc(struct virt_dma_desc *vd)
|
|
{
|
|
struct sun6i_desc *txd = to_sun6i_desc(&vd->tx);
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vd->tx.chan->device);
|
|
struct sun6i_dma_lli *v_lli, *v_next;
|
|
dma_addr_t p_lli, p_next;
|
|
|
|
if (unlikely(!txd))
|
|
return;
|
|
|
|
p_lli = txd->p_lli;
|
|
v_lli = txd->v_lli;
|
|
|
|
while (v_lli) {
|
|
v_next = v_lli->v_lli_next;
|
|
p_next = v_lli->p_lli_next;
|
|
|
|
dma_pool_free(sdev->pool, v_lli, p_lli);
|
|
|
|
v_lli = v_next;
|
|
p_lli = p_next;
|
|
}
|
|
|
|
kfree(txd);
|
|
}
|
|
|
|
static int sun6i_dma_start_desc(struct sun6i_vchan *vchan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
|
|
struct virt_dma_desc *desc = vchan_next_desc(&vchan->vc);
|
|
struct sun6i_pchan *pchan = vchan->phy;
|
|
u32 irq_val, irq_reg, irq_offset;
|
|
|
|
if (!pchan)
|
|
return -EAGAIN;
|
|
|
|
if (!desc) {
|
|
pchan->desc = NULL;
|
|
pchan->done = NULL;
|
|
return -EAGAIN;
|
|
}
|
|
|
|
list_del(&desc->node);
|
|
|
|
pchan->desc = to_sun6i_desc(&desc->tx);
|
|
pchan->done = NULL;
|
|
|
|
sun6i_dma_dump_lli(vchan, pchan->desc->v_lli, pchan->desc->p_lli);
|
|
|
|
irq_reg = pchan->idx / DMA_IRQ_CHAN_NR;
|
|
irq_offset = pchan->idx % DMA_IRQ_CHAN_NR;
|
|
|
|
vchan->irq_type = vchan->cyclic ? DMA_IRQ_PKG : DMA_IRQ_QUEUE;
|
|
|
|
irq_val = readl(sdev->base + DMA_IRQ_EN(irq_reg));
|
|
irq_val &= ~((DMA_IRQ_HALF | DMA_IRQ_PKG | DMA_IRQ_QUEUE) <<
|
|
(irq_offset * DMA_IRQ_CHAN_WIDTH));
|
|
irq_val |= vchan->irq_type << (irq_offset * DMA_IRQ_CHAN_WIDTH);
|
|
writel(irq_val, sdev->base + DMA_IRQ_EN(irq_reg));
|
|
|
|
writel(pchan->desc->p_lli, pchan->base + DMA_CHAN_LLI_ADDR);
|
|
writel(DMA_CHAN_ENABLE_START, pchan->base + DMA_CHAN_ENABLE);
|
|
|
|
sun6i_dma_dump_com_regs(sdev);
|
|
sun6i_dma_dump_chan_regs(sdev, pchan);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sun6i_dma_tasklet(struct tasklet_struct *t)
|
|
{
|
|
struct sun6i_dma_dev *sdev = from_tasklet(sdev, t, task);
|
|
struct sun6i_vchan *vchan;
|
|
struct sun6i_pchan *pchan;
|
|
unsigned int pchan_alloc = 0;
|
|
unsigned int pchan_idx;
|
|
|
|
list_for_each_entry(vchan, &sdev->slave.channels, vc.chan.device_node) {
|
|
spin_lock_irq(&vchan->vc.lock);
|
|
|
|
pchan = vchan->phy;
|
|
|
|
if (pchan && pchan->done) {
|
|
if (sun6i_dma_start_desc(vchan)) {
|
|
/*
|
|
* No current txd associated with this channel
|
|
*/
|
|
dev_dbg(sdev->slave.dev, "pchan %u: free\n",
|
|
pchan->idx);
|
|
|
|
/* Mark this channel free */
|
|
vchan->phy = NULL;
|
|
pchan->vchan = NULL;
|
|
}
|
|
}
|
|
spin_unlock_irq(&vchan->vc.lock);
|
|
}
|
|
|
|
spin_lock_irq(&sdev->lock);
|
|
for (pchan_idx = 0; pchan_idx < sdev->num_pchans; pchan_idx++) {
|
|
pchan = &sdev->pchans[pchan_idx];
|
|
|
|
if (pchan->vchan || list_empty(&sdev->pending))
|
|
continue;
|
|
|
|
vchan = list_first_entry(&sdev->pending,
|
|
struct sun6i_vchan, node);
|
|
|
|
/* Remove from pending channels */
|
|
list_del_init(&vchan->node);
|
|
pchan_alloc |= BIT(pchan_idx);
|
|
|
|
/* Mark this channel allocated */
|
|
pchan->vchan = vchan;
|
|
vchan->phy = pchan;
|
|
dev_dbg(sdev->slave.dev, "pchan %u: alloc vchan %p\n",
|
|
pchan->idx, &vchan->vc);
|
|
}
|
|
spin_unlock_irq(&sdev->lock);
|
|
|
|
for (pchan_idx = 0; pchan_idx < sdev->num_pchans; pchan_idx++) {
|
|
if (!(pchan_alloc & BIT(pchan_idx)))
|
|
continue;
|
|
|
|
pchan = sdev->pchans + pchan_idx;
|
|
vchan = pchan->vchan;
|
|
if (vchan) {
|
|
spin_lock_irq(&vchan->vc.lock);
|
|
sun6i_dma_start_desc(vchan);
|
|
spin_unlock_irq(&vchan->vc.lock);
|
|
}
|
|
}
|
|
}
|
|
|
|
static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct sun6i_dma_dev *sdev = dev_id;
|
|
struct sun6i_vchan *vchan;
|
|
struct sun6i_pchan *pchan;
|
|
int i, j, ret = IRQ_NONE;
|
|
u32 status;
|
|
|
|
for (i = 0; i < sdev->num_pchans / DMA_IRQ_CHAN_NR; i++) {
|
|
status = readl(sdev->base + DMA_IRQ_STAT(i));
|
|
if (!status)
|
|
continue;
|
|
|
|
dev_dbg(sdev->slave.dev, "DMA irq status %s: 0x%x\n",
|
|
i ? "high" : "low", status);
|
|
|
|
writel(status, sdev->base + DMA_IRQ_STAT(i));
|
|
|
|
for (j = 0; (j < DMA_IRQ_CHAN_NR) && status; j++) {
|
|
pchan = sdev->pchans + j;
|
|
vchan = pchan->vchan;
|
|
if (vchan && (status & vchan->irq_type)) {
|
|
if (vchan->cyclic) {
|
|
vchan_cyclic_callback(&pchan->desc->vd);
|
|
} else {
|
|
spin_lock(&vchan->vc.lock);
|
|
vchan_cookie_complete(&pchan->desc->vd);
|
|
pchan->done = pchan->desc;
|
|
spin_unlock(&vchan->vc.lock);
|
|
}
|
|
}
|
|
|
|
status = status >> DMA_IRQ_CHAN_WIDTH;
|
|
}
|
|
|
|
if (!atomic_read(&sdev->tasklet_shutdown))
|
|
tasklet_schedule(&sdev->task);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int set_config(struct sun6i_dma_dev *sdev,
|
|
struct dma_slave_config *sconfig,
|
|
enum dma_transfer_direction direction,
|
|
u32 *p_cfg)
|
|
{
|
|
enum dma_slave_buswidth src_addr_width, dst_addr_width;
|
|
u32 src_maxburst, dst_maxburst;
|
|
s8 src_width, dst_width, src_burst, dst_burst;
|
|
|
|
src_addr_width = sconfig->src_addr_width;
|
|
dst_addr_width = sconfig->dst_addr_width;
|
|
src_maxburst = sconfig->src_maxburst;
|
|
dst_maxburst = sconfig->dst_maxburst;
|
|
|
|
switch (direction) {
|
|
case DMA_MEM_TO_DEV:
|
|
if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
|
|
src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
src_maxburst = src_maxburst ? src_maxburst : 8;
|
|
break;
|
|
case DMA_DEV_TO_MEM:
|
|
if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
|
|
dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
dst_maxburst = dst_maxburst ? dst_maxburst : 8;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!(BIT(src_addr_width) & sdev->slave.src_addr_widths))
|
|
return -EINVAL;
|
|
if (!(BIT(dst_addr_width) & sdev->slave.dst_addr_widths))
|
|
return -EINVAL;
|
|
if (!(BIT(src_maxburst) & sdev->cfg->src_burst_lengths))
|
|
return -EINVAL;
|
|
if (!(BIT(dst_maxburst) & sdev->cfg->dst_burst_lengths))
|
|
return -EINVAL;
|
|
|
|
src_width = convert_buswidth(src_addr_width);
|
|
dst_width = convert_buswidth(dst_addr_width);
|
|
dst_burst = convert_burst(dst_maxburst);
|
|
src_burst = convert_burst(src_maxburst);
|
|
|
|
*p_cfg = DMA_CHAN_CFG_SRC_WIDTH(src_width) |
|
|
DMA_CHAN_CFG_DST_WIDTH(dst_width);
|
|
|
|
sdev->cfg->set_burst_length(p_cfg, src_burst, dst_burst);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void sun6i_dma_set_addr(struct sun6i_dma_dev *sdev,
|
|
struct sun6i_dma_lli *v_lli,
|
|
dma_addr_t src, dma_addr_t dst)
|
|
{
|
|
v_lli->src = lower_32_bits(src);
|
|
v_lli->dst = lower_32_bits(dst);
|
|
|
|
if (sdev->cfg->has_high_addr)
|
|
v_lli->para |= SRC_HIGH_ADDR(upper_32_bits(src)) |
|
|
DST_HIGH_ADDR(upper_32_bits(dst));
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
|
|
struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
|
|
size_t len, unsigned long flags)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct sun6i_dma_lli *v_lli;
|
|
struct sun6i_desc *txd;
|
|
dma_addr_t p_lli;
|
|
s8 burst, width;
|
|
|
|
dev_dbg(chan2dev(chan),
|
|
"%s; chan: %d, dest: %pad, src: %pad, len: %zu. flags: 0x%08lx\n",
|
|
__func__, vchan->vc.chan.chan_id, &dest, &src, len, flags);
|
|
|
|
if (!len)
|
|
return NULL;
|
|
|
|
txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
|
|
if (!txd)
|
|
return NULL;
|
|
|
|
v_lli = dma_pool_alloc(sdev->pool, GFP_DMA32 | GFP_NOWAIT, &p_lli);
|
|
if (!v_lli) {
|
|
dev_err(sdev->slave.dev, "Failed to alloc lli memory\n");
|
|
goto err_txd_free;
|
|
}
|
|
|
|
v_lli->len = len;
|
|
v_lli->para = NORMAL_WAIT;
|
|
sun6i_dma_set_addr(sdev, v_lli, src, dest);
|
|
|
|
burst = convert_burst(8);
|
|
width = convert_buswidth(DMA_SLAVE_BUSWIDTH_4_BYTES);
|
|
v_lli->cfg = DMA_CHAN_CFG_SRC_WIDTH(width) |
|
|
DMA_CHAN_CFG_DST_WIDTH(width);
|
|
|
|
sdev->cfg->set_burst_length(&v_lli->cfg, burst, burst);
|
|
sdev->cfg->set_drq(&v_lli->cfg, DRQ_SDRAM, DRQ_SDRAM);
|
|
sdev->cfg->set_mode(&v_lli->cfg, LINEAR_MODE, LINEAR_MODE);
|
|
|
|
sun6i_dma_lli_add(NULL, v_lli, p_lli, txd);
|
|
|
|
sun6i_dma_dump_lli(vchan, v_lli, p_lli);
|
|
|
|
return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
|
|
|
|
err_txd_free:
|
|
kfree(txd);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
|
|
struct dma_chan *chan, struct scatterlist *sgl,
|
|
unsigned int sg_len, enum dma_transfer_direction dir,
|
|
unsigned long flags, void *context)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct dma_slave_config *sconfig = &vchan->cfg;
|
|
struct sun6i_dma_lli *v_lli, *prev = NULL;
|
|
struct sun6i_desc *txd;
|
|
struct scatterlist *sg;
|
|
dma_addr_t p_lli;
|
|
u32 lli_cfg;
|
|
int i, ret;
|
|
|
|
if (!sgl)
|
|
return NULL;
|
|
|
|
ret = set_config(sdev, sconfig, dir, &lli_cfg);
|
|
if (ret) {
|
|
dev_err(chan2dev(chan), "Invalid DMA configuration\n");
|
|
return NULL;
|
|
}
|
|
|
|
txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
|
|
if (!txd)
|
|
return NULL;
|
|
|
|
for_each_sg(sgl, sg, sg_len, i) {
|
|
v_lli = dma_pool_alloc(sdev->pool, GFP_DMA32 | GFP_NOWAIT, &p_lli);
|
|
if (!v_lli)
|
|
goto err_lli_free;
|
|
|
|
v_lli->len = sg_dma_len(sg);
|
|
v_lli->para = NORMAL_WAIT;
|
|
|
|
if (dir == DMA_MEM_TO_DEV) {
|
|
sun6i_dma_set_addr(sdev, v_lli,
|
|
sg_dma_address(sg),
|
|
sconfig->dst_addr);
|
|
v_lli->cfg = lli_cfg;
|
|
sdev->cfg->set_drq(&v_lli->cfg, DRQ_SDRAM, vchan->port);
|
|
sdev->cfg->set_mode(&v_lli->cfg, LINEAR_MODE, IO_MODE);
|
|
|
|
dev_dbg(chan2dev(chan),
|
|
"%s; chan: %d, dest: %pad, src: %pad, len: %u. flags: 0x%08lx\n",
|
|
__func__, vchan->vc.chan.chan_id,
|
|
&sconfig->dst_addr, &sg_dma_address(sg),
|
|
sg_dma_len(sg), flags);
|
|
|
|
} else {
|
|
sun6i_dma_set_addr(sdev, v_lli,
|
|
sconfig->src_addr,
|
|
sg_dma_address(sg));
|
|
v_lli->cfg = lli_cfg;
|
|
sdev->cfg->set_drq(&v_lli->cfg, vchan->port, DRQ_SDRAM);
|
|
sdev->cfg->set_mode(&v_lli->cfg, IO_MODE, LINEAR_MODE);
|
|
|
|
dev_dbg(chan2dev(chan),
|
|
"%s; chan: %d, dest: %pad, src: %pad, len: %u. flags: 0x%08lx\n",
|
|
__func__, vchan->vc.chan.chan_id,
|
|
&sg_dma_address(sg), &sconfig->src_addr,
|
|
sg_dma_len(sg), flags);
|
|
}
|
|
|
|
prev = sun6i_dma_lli_add(prev, v_lli, p_lli, txd);
|
|
}
|
|
|
|
dev_dbg(chan2dev(chan), "First: %pad\n", &txd->p_lli);
|
|
for (p_lli = txd->p_lli, v_lli = txd->v_lli; v_lli;
|
|
p_lli = v_lli->p_lli_next, v_lli = v_lli->v_lli_next)
|
|
sun6i_dma_dump_lli(vchan, v_lli, p_lli);
|
|
|
|
return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
|
|
|
|
err_lli_free:
|
|
for (p_lli = txd->p_lli, v_lli = txd->v_lli; v_lli;
|
|
p_lli = v_lli->p_lli_next, v_lli = v_lli->v_lli_next)
|
|
dma_pool_free(sdev->pool, v_lli, p_lli);
|
|
kfree(txd);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_cyclic(
|
|
struct dma_chan *chan,
|
|
dma_addr_t buf_addr,
|
|
size_t buf_len,
|
|
size_t period_len,
|
|
enum dma_transfer_direction dir,
|
|
unsigned long flags)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct dma_slave_config *sconfig = &vchan->cfg;
|
|
struct sun6i_dma_lli *v_lli, *prev = NULL;
|
|
struct sun6i_desc *txd;
|
|
dma_addr_t p_lli;
|
|
u32 lli_cfg;
|
|
unsigned int i, periods = buf_len / period_len;
|
|
int ret;
|
|
|
|
ret = set_config(sdev, sconfig, dir, &lli_cfg);
|
|
if (ret) {
|
|
dev_err(chan2dev(chan), "Invalid DMA configuration\n");
|
|
return NULL;
|
|
}
|
|
|
|
txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
|
|
if (!txd)
|
|
return NULL;
|
|
|
|
for (i = 0; i < periods; i++) {
|
|
v_lli = dma_pool_alloc(sdev->pool, GFP_DMA32 | GFP_NOWAIT, &p_lli);
|
|
if (!v_lli) {
|
|
dev_err(sdev->slave.dev, "Failed to alloc lli memory\n");
|
|
goto err_lli_free;
|
|
}
|
|
|
|
v_lli->len = period_len;
|
|
v_lli->para = NORMAL_WAIT;
|
|
|
|
if (dir == DMA_MEM_TO_DEV) {
|
|
sun6i_dma_set_addr(sdev, v_lli,
|
|
buf_addr + period_len * i,
|
|
sconfig->dst_addr);
|
|
v_lli->cfg = lli_cfg;
|
|
sdev->cfg->set_drq(&v_lli->cfg, DRQ_SDRAM, vchan->port);
|
|
sdev->cfg->set_mode(&v_lli->cfg, LINEAR_MODE, IO_MODE);
|
|
} else {
|
|
sun6i_dma_set_addr(sdev, v_lli,
|
|
sconfig->src_addr,
|
|
buf_addr + period_len * i);
|
|
v_lli->cfg = lli_cfg;
|
|
sdev->cfg->set_drq(&v_lli->cfg, vchan->port, DRQ_SDRAM);
|
|
sdev->cfg->set_mode(&v_lli->cfg, IO_MODE, LINEAR_MODE);
|
|
}
|
|
|
|
prev = sun6i_dma_lli_add(prev, v_lli, p_lli, txd);
|
|
}
|
|
|
|
prev->p_lli_next = txd->p_lli; /* cyclic list */
|
|
|
|
vchan->cyclic = true;
|
|
|
|
return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
|
|
|
|
err_lli_free:
|
|
for (p_lli = txd->p_lli, v_lli = txd->v_lli; v_lli;
|
|
p_lli = v_lli->p_lli_next, v_lli = v_lli->v_lli_next)
|
|
dma_pool_free(sdev->pool, v_lli, p_lli);
|
|
kfree(txd);
|
|
return NULL;
|
|
}
|
|
|
|
static int sun6i_dma_config(struct dma_chan *chan,
|
|
struct dma_slave_config *config)
|
|
{
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
|
|
memcpy(&vchan->cfg, config, sizeof(*config));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_dma_pause(struct dma_chan *chan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct sun6i_pchan *pchan = vchan->phy;
|
|
|
|
dev_dbg(chan2dev(chan), "vchan %p: pause\n", &vchan->vc);
|
|
|
|
if (pchan) {
|
|
writel(DMA_CHAN_PAUSE_PAUSE,
|
|
pchan->base + DMA_CHAN_PAUSE);
|
|
} else {
|
|
spin_lock(&sdev->lock);
|
|
list_del_init(&vchan->node);
|
|
spin_unlock(&sdev->lock);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_dma_resume(struct dma_chan *chan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct sun6i_pchan *pchan = vchan->phy;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(chan2dev(chan), "vchan %p: resume\n", &vchan->vc);
|
|
|
|
spin_lock_irqsave(&vchan->vc.lock, flags);
|
|
|
|
if (pchan) {
|
|
writel(DMA_CHAN_PAUSE_RESUME,
|
|
pchan->base + DMA_CHAN_PAUSE);
|
|
} else if (!list_empty(&vchan->vc.desc_issued)) {
|
|
spin_lock(&sdev->lock);
|
|
list_add_tail(&vchan->node, &sdev->pending);
|
|
spin_unlock(&sdev->lock);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&vchan->vc.lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_dma_terminate_all(struct dma_chan *chan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct sun6i_pchan *pchan = vchan->phy;
|
|
unsigned long flags;
|
|
LIST_HEAD(head);
|
|
|
|
spin_lock(&sdev->lock);
|
|
list_del_init(&vchan->node);
|
|
spin_unlock(&sdev->lock);
|
|
|
|
spin_lock_irqsave(&vchan->vc.lock, flags);
|
|
|
|
if (vchan->cyclic) {
|
|
vchan->cyclic = false;
|
|
if (pchan && pchan->desc) {
|
|
struct virt_dma_desc *vd = &pchan->desc->vd;
|
|
struct virt_dma_chan *vc = &vchan->vc;
|
|
|
|
list_add_tail(&vd->node, &vc->desc_completed);
|
|
}
|
|
}
|
|
|
|
vchan_get_all_descriptors(&vchan->vc, &head);
|
|
|
|
if (pchan) {
|
|
writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
|
|
writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
|
|
|
|
vchan->phy = NULL;
|
|
pchan->vchan = NULL;
|
|
pchan->desc = NULL;
|
|
pchan->done = NULL;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&vchan->vc.lock, flags);
|
|
|
|
vchan_dma_desc_free_list(&vchan->vc, &head);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum dma_status sun6i_dma_tx_status(struct dma_chan *chan,
|
|
dma_cookie_t cookie,
|
|
struct dma_tx_state *state)
|
|
{
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct sun6i_pchan *pchan = vchan->phy;
|
|
struct sun6i_dma_lli *lli;
|
|
struct virt_dma_desc *vd;
|
|
struct sun6i_desc *txd;
|
|
enum dma_status ret;
|
|
unsigned long flags;
|
|
size_t bytes = 0;
|
|
|
|
ret = dma_cookie_status(chan, cookie, state);
|
|
if (ret == DMA_COMPLETE || !state)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&vchan->vc.lock, flags);
|
|
|
|
vd = vchan_find_desc(&vchan->vc, cookie);
|
|
txd = to_sun6i_desc(&vd->tx);
|
|
|
|
if (vd) {
|
|
for (lli = txd->v_lli; lli != NULL; lli = lli->v_lli_next)
|
|
bytes += lli->len;
|
|
} else if (!pchan || !pchan->desc) {
|
|
bytes = 0;
|
|
} else {
|
|
bytes = sun6i_get_chan_size(pchan);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&vchan->vc.lock, flags);
|
|
|
|
dma_set_residue(state, bytes);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sun6i_dma_issue_pending(struct dma_chan *chan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&vchan->vc.lock, flags);
|
|
|
|
if (vchan_issue_pending(&vchan->vc)) {
|
|
spin_lock(&sdev->lock);
|
|
|
|
if (!vchan->phy && list_empty(&vchan->node)) {
|
|
list_add_tail(&vchan->node, &sdev->pending);
|
|
tasklet_schedule(&sdev->task);
|
|
dev_dbg(chan2dev(chan), "vchan %p: issued\n",
|
|
&vchan->vc);
|
|
}
|
|
|
|
spin_unlock(&sdev->lock);
|
|
} else {
|
|
dev_dbg(chan2dev(chan), "vchan %p: nothing to issue\n",
|
|
&vchan->vc);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&vchan->vc.lock, flags);
|
|
}
|
|
|
|
static void sun6i_dma_free_chan_resources(struct dma_chan *chan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&sdev->lock, flags);
|
|
list_del_init(&vchan->node);
|
|
spin_unlock_irqrestore(&sdev->lock, flags);
|
|
|
|
vchan_free_chan_resources(&vchan->vc);
|
|
}
|
|
|
|
static struct dma_chan *sun6i_dma_of_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct sun6i_dma_dev *sdev = ofdma->of_dma_data;
|
|
struct sun6i_vchan *vchan;
|
|
struct dma_chan *chan;
|
|
u8 port = dma_spec->args[0];
|
|
|
|
if (port > sdev->max_request)
|
|
return NULL;
|
|
|
|
chan = dma_get_any_slave_channel(&sdev->slave);
|
|
if (!chan)
|
|
return NULL;
|
|
|
|
vchan = to_sun6i_vchan(chan);
|
|
vchan->port = port;
|
|
|
|
return chan;
|
|
}
|
|
|
|
static inline void sun6i_kill_tasklet(struct sun6i_dma_dev *sdev)
|
|
{
|
|
/* Disable all interrupts from DMA */
|
|
writel(0, sdev->base + DMA_IRQ_EN(0));
|
|
writel(0, sdev->base + DMA_IRQ_EN(1));
|
|
|
|
/* Prevent spurious interrupts from scheduling the tasklet */
|
|
atomic_inc(&sdev->tasklet_shutdown);
|
|
|
|
/* Make sure we won't have any further interrupts */
|
|
devm_free_irq(sdev->slave.dev, sdev->irq, sdev);
|
|
|
|
/* Actually prevent the tasklet from being scheduled */
|
|
tasklet_kill(&sdev->task);
|
|
}
|
|
|
|
static inline void sun6i_dma_free(struct sun6i_dma_dev *sdev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sdev->num_vchans; i++) {
|
|
struct sun6i_vchan *vchan = &sdev->vchans[i];
|
|
|
|
list_del(&vchan->vc.chan.device_node);
|
|
tasklet_kill(&vchan->vc.task);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* For A31:
|
|
*
|
|
* There's 16 physical channels that can work in parallel.
|
|
*
|
|
* However we have 30 different endpoints for our requests.
|
|
*
|
|
* Since the channels are able to handle only an unidirectional
|
|
* transfer, we need to allocate more virtual channels so that
|
|
* everyone can grab one channel.
|
|
*
|
|
* Some devices can't work in both direction (mostly because it
|
|
* wouldn't make sense), so we have a bit fewer virtual channels than
|
|
* 2 channels per endpoints.
|
|
*/
|
|
|
|
static struct sun6i_dma_config sun6i_a31_dma_cfg = {
|
|
.nr_max_channels = 16,
|
|
.nr_max_requests = 30,
|
|
.nr_max_vchans = 53,
|
|
.set_burst_length = sun6i_set_burst_length_a31,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(8),
|
|
.dst_burst_lengths = BIT(1) | BIT(8),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
};
|
|
|
|
/*
|
|
* The A23 only has 8 physical channels, a maximum DRQ port id of 24,
|
|
* and a total of 37 usable source and destination endpoints.
|
|
*/
|
|
|
|
static struct sun6i_dma_config sun8i_a23_dma_cfg = {
|
|
.nr_max_channels = 8,
|
|
.nr_max_requests = 24,
|
|
.nr_max_vchans = 37,
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_a23,
|
|
.set_burst_length = sun6i_set_burst_length_a31,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(8),
|
|
.dst_burst_lengths = BIT(1) | BIT(8),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
};
|
|
|
|
static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
|
|
.nr_max_channels = 8,
|
|
.nr_max_requests = 28,
|
|
.nr_max_vchans = 39,
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_a23,
|
|
.set_burst_length = sun6i_set_burst_length_a31,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(8),
|
|
.dst_burst_lengths = BIT(1) | BIT(8),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
};
|
|
|
|
/*
|
|
* The H3 has 12 physical channels, a maximum DRQ port id of 27,
|
|
* and a total of 34 usable source and destination endpoints.
|
|
* It also supports additional burst lengths and bus widths,
|
|
* and the burst length fields have different offsets.
|
|
*/
|
|
|
|
static struct sun6i_dma_config sun8i_h3_dma_cfg = {
|
|
.nr_max_channels = 12,
|
|
.nr_max_requests = 27,
|
|
.nr_max_vchans = 34,
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
|
|
.set_burst_length = sun6i_set_burst_length_h3,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
};
|
|
|
|
/*
|
|
* The A64 binding uses the number of dma channels from the
|
|
* device tree node.
|
|
*/
|
|
static struct sun6i_dma_config sun50i_a64_dma_cfg = {
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
|
|
.set_burst_length = sun6i_set_burst_length_h3,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
};
|
|
|
|
/*
|
|
* The A100 binding uses the number of dma channels from the
|
|
* device tree node.
|
|
*/
|
|
static struct sun6i_dma_config sun50i_a100_dma_cfg = {
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
|
|
.set_burst_length = sun6i_set_burst_length_h3,
|
|
.set_drq = sun6i_set_drq_h6,
|
|
.set_mode = sun6i_set_mode_h6,
|
|
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.has_high_addr = true,
|
|
.has_mbus_clk = true,
|
|
};
|
|
|
|
/*
|
|
* The H6 binding uses the number of dma channels from the
|
|
* device tree node.
|
|
*/
|
|
static struct sun6i_dma_config sun50i_h6_dma_cfg = {
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
|
|
.set_burst_length = sun6i_set_burst_length_h3,
|
|
.set_drq = sun6i_set_drq_h6,
|
|
.set_mode = sun6i_set_mode_h6,
|
|
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.has_mbus_clk = true,
|
|
};
|
|
|
|
/*
|
|
* The V3s have only 8 physical channels, a maximum DRQ port id of 23,
|
|
* and a total of 24 usable source and destination endpoints.
|
|
*/
|
|
|
|
static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
|
|
.nr_max_channels = 8,
|
|
.nr_max_requests = 23,
|
|
.nr_max_vchans = 24,
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_a23,
|
|
.set_burst_length = sun6i_set_burst_length_a31,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(8),
|
|
.dst_burst_lengths = BIT(1) | BIT(8),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
};
|
|
|
|
static const struct of_device_id sun6i_dma_match[] = {
|
|
{ .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg },
|
|
{ .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg },
|
|
{ .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg },
|
|
{ .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
|
|
{ .compatible = "allwinner,sun8i-v3s-dma", .data = &sun8i_v3s_dma_cfg },
|
|
{ .compatible = "allwinner,sun20i-d1-dma", .data = &sun50i_a100_dma_cfg },
|
|
{ .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg },
|
|
{ .compatible = "allwinner,sun50i-a100-dma", .data = &sun50i_a100_dma_cfg },
|
|
{ .compatible = "allwinner,sun50i-h6-dma", .data = &sun50i_h6_dma_cfg },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sun6i_dma_match);
|
|
|
|
static int sun6i_dma_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct sun6i_dma_dev *sdc;
|
|
int ret, i;
|
|
|
|
sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
|
|
if (!sdc)
|
|
return -ENOMEM;
|
|
|
|
sdc->cfg = of_device_get_match_data(&pdev->dev);
|
|
if (!sdc->cfg)
|
|
return -ENODEV;
|
|
|
|
sdc->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(sdc->base))
|
|
return PTR_ERR(sdc->base);
|
|
|
|
sdc->irq = platform_get_irq(pdev, 0);
|
|
if (sdc->irq < 0)
|
|
return sdc->irq;
|
|
|
|
sdc->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(sdc->clk)) {
|
|
dev_err(&pdev->dev, "No clock specified\n");
|
|
return PTR_ERR(sdc->clk);
|
|
}
|
|
|
|
if (sdc->cfg->has_mbus_clk) {
|
|
sdc->clk_mbus = devm_clk_get(&pdev->dev, "mbus");
|
|
if (IS_ERR(sdc->clk_mbus)) {
|
|
dev_err(&pdev->dev, "No mbus clock specified\n");
|
|
return PTR_ERR(sdc->clk_mbus);
|
|
}
|
|
}
|
|
|
|
sdc->rstc = devm_reset_control_get(&pdev->dev, NULL);
|
|
if (IS_ERR(sdc->rstc)) {
|
|
dev_err(&pdev->dev, "No reset controller specified\n");
|
|
return PTR_ERR(sdc->rstc);
|
|
}
|
|
|
|
sdc->pool = dmam_pool_create(dev_name(&pdev->dev), &pdev->dev,
|
|
sizeof(struct sun6i_dma_lli), 4, 0);
|
|
if (!sdc->pool) {
|
|
dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, sdc);
|
|
INIT_LIST_HEAD(&sdc->pending);
|
|
spin_lock_init(&sdc->lock);
|
|
|
|
dma_set_max_seg_size(&pdev->dev, SZ_32M - 1);
|
|
|
|
dma_cap_set(DMA_PRIVATE, sdc->slave.cap_mask);
|
|
dma_cap_set(DMA_MEMCPY, sdc->slave.cap_mask);
|
|
dma_cap_set(DMA_SLAVE, sdc->slave.cap_mask);
|
|
dma_cap_set(DMA_CYCLIC, sdc->slave.cap_mask);
|
|
|
|
INIT_LIST_HEAD(&sdc->slave.channels);
|
|
sdc->slave.device_free_chan_resources = sun6i_dma_free_chan_resources;
|
|
sdc->slave.device_tx_status = sun6i_dma_tx_status;
|
|
sdc->slave.device_issue_pending = sun6i_dma_issue_pending;
|
|
sdc->slave.device_prep_slave_sg = sun6i_dma_prep_slave_sg;
|
|
sdc->slave.device_prep_dma_memcpy = sun6i_dma_prep_dma_memcpy;
|
|
sdc->slave.device_prep_dma_cyclic = sun6i_dma_prep_dma_cyclic;
|
|
sdc->slave.copy_align = DMAENGINE_ALIGN_4_BYTES;
|
|
sdc->slave.device_config = sun6i_dma_config;
|
|
sdc->slave.device_pause = sun6i_dma_pause;
|
|
sdc->slave.device_resume = sun6i_dma_resume;
|
|
sdc->slave.device_terminate_all = sun6i_dma_terminate_all;
|
|
sdc->slave.src_addr_widths = sdc->cfg->src_addr_widths;
|
|
sdc->slave.dst_addr_widths = sdc->cfg->dst_addr_widths;
|
|
sdc->slave.directions = BIT(DMA_DEV_TO_MEM) |
|
|
BIT(DMA_MEM_TO_DEV);
|
|
sdc->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
|
|
sdc->slave.dev = &pdev->dev;
|
|
|
|
sdc->num_pchans = sdc->cfg->nr_max_channels;
|
|
sdc->num_vchans = sdc->cfg->nr_max_vchans;
|
|
sdc->max_request = sdc->cfg->nr_max_requests;
|
|
|
|
ret = of_property_read_u32(np, "dma-channels", &sdc->num_pchans);
|
|
if (ret && !sdc->num_pchans) {
|
|
dev_err(&pdev->dev, "Can't get dma-channels.\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "dma-requests", &sdc->max_request);
|
|
if (ret && !sdc->max_request) {
|
|
dev_info(&pdev->dev, "Missing dma-requests, using %u.\n",
|
|
DMA_CHAN_MAX_DRQ_A31);
|
|
sdc->max_request = DMA_CHAN_MAX_DRQ_A31;
|
|
}
|
|
|
|
/*
|
|
* If the number of vchans is not specified, derive it from the
|
|
* highest port number, at most one channel per port and direction.
|
|
*/
|
|
if (!sdc->num_vchans)
|
|
sdc->num_vchans = 2 * (sdc->max_request + 1);
|
|
|
|
sdc->pchans = devm_kcalloc(&pdev->dev, sdc->num_pchans,
|
|
sizeof(struct sun6i_pchan), GFP_KERNEL);
|
|
if (!sdc->pchans)
|
|
return -ENOMEM;
|
|
|
|
sdc->vchans = devm_kcalloc(&pdev->dev, sdc->num_vchans,
|
|
sizeof(struct sun6i_vchan), GFP_KERNEL);
|
|
if (!sdc->vchans)
|
|
return -ENOMEM;
|
|
|
|
tasklet_setup(&sdc->task, sun6i_dma_tasklet);
|
|
|
|
for (i = 0; i < sdc->num_pchans; i++) {
|
|
struct sun6i_pchan *pchan = &sdc->pchans[i];
|
|
|
|
pchan->idx = i;
|
|
pchan->base = sdc->base + 0x100 + i * 0x40;
|
|
}
|
|
|
|
for (i = 0; i < sdc->num_vchans; i++) {
|
|
struct sun6i_vchan *vchan = &sdc->vchans[i];
|
|
|
|
INIT_LIST_HEAD(&vchan->node);
|
|
vchan->vc.desc_free = sun6i_dma_free_desc;
|
|
vchan_init(&vchan->vc, &sdc->slave);
|
|
}
|
|
|
|
ret = reset_control_deassert(sdc->rstc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Couldn't deassert the device from reset\n");
|
|
goto err_chan_free;
|
|
}
|
|
|
|
ret = clk_prepare_enable(sdc->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Couldn't enable the clock\n");
|
|
goto err_reset_assert;
|
|
}
|
|
|
|
if (sdc->cfg->has_mbus_clk) {
|
|
ret = clk_prepare_enable(sdc->clk_mbus);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Couldn't enable mbus clock\n");
|
|
goto err_clk_disable;
|
|
}
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, sdc->irq, sun6i_dma_interrupt, 0,
|
|
dev_name(&pdev->dev), sdc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Cannot request IRQ\n");
|
|
goto err_mbus_clk_disable;
|
|
}
|
|
|
|
ret = dma_async_device_register(&sdc->slave);
|
|
if (ret) {
|
|
dev_warn(&pdev->dev, "Failed to register DMA engine device\n");
|
|
goto err_irq_disable;
|
|
}
|
|
|
|
ret = of_dma_controller_register(pdev->dev.of_node, sun6i_dma_of_xlate,
|
|
sdc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "of_dma_controller_register failed\n");
|
|
goto err_dma_unregister;
|
|
}
|
|
|
|
if (sdc->cfg->clock_autogate_enable)
|
|
sdc->cfg->clock_autogate_enable(sdc);
|
|
|
|
return 0;
|
|
|
|
err_dma_unregister:
|
|
dma_async_device_unregister(&sdc->slave);
|
|
err_irq_disable:
|
|
sun6i_kill_tasklet(sdc);
|
|
err_mbus_clk_disable:
|
|
clk_disable_unprepare(sdc->clk_mbus);
|
|
err_clk_disable:
|
|
clk_disable_unprepare(sdc->clk);
|
|
err_reset_assert:
|
|
reset_control_assert(sdc->rstc);
|
|
err_chan_free:
|
|
sun6i_dma_free(sdc);
|
|
return ret;
|
|
}
|
|
|
|
static void sun6i_dma_remove(struct platform_device *pdev)
|
|
{
|
|
struct sun6i_dma_dev *sdc = platform_get_drvdata(pdev);
|
|
|
|
of_dma_controller_free(pdev->dev.of_node);
|
|
dma_async_device_unregister(&sdc->slave);
|
|
|
|
sun6i_kill_tasklet(sdc);
|
|
|
|
clk_disable_unprepare(sdc->clk_mbus);
|
|
clk_disable_unprepare(sdc->clk);
|
|
reset_control_assert(sdc->rstc);
|
|
|
|
sun6i_dma_free(sdc);
|
|
}
|
|
|
|
static struct platform_driver sun6i_dma_driver = {
|
|
.probe = sun6i_dma_probe,
|
|
.remove_new = sun6i_dma_remove,
|
|
.driver = {
|
|
.name = "sun6i-dma",
|
|
.of_match_table = sun6i_dma_match,
|
|
},
|
|
};
|
|
module_platform_driver(sun6i_dma_driver);
|
|
|
|
MODULE_DESCRIPTION("Allwinner A31 DMA Controller Driver");
|
|
MODULE_AUTHOR("Sugar <shuge@allwinnertech.com>");
|
|
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
|
|
MODULE_LICENSE("GPL");
|