linux/drivers/ata/libahci_platform.c
Zhang Zekun aa3ca1faf3 ata: libahci_platform: Simplify code with for_each_child_of_node_scoped()
for_each_child_of_node_scoped() can put the device_node automatically.
So let's use it to make the code simpler by avoiding the need to
explicitly call of_node_put().

Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240810023426.110624-1-zhangzekun11@huawei.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-08-15 13:30:06 +02:00

945 lines
23 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* AHCI SATA platform library
*
* Copyright 2004-2005 Red Hat, Inc.
* Jeff Garzik <jgarzik@pobox.com>
* Copyright 2010 MontaVista Software, LLC.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*/
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/reset.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
struct ata_port_operations ahci_platform_ops = {
.inherits = &ahci_ops,
.host_stop = ahci_host_stop,
};
EXPORT_SYMBOL_GPL(ahci_platform_ops);
/**
* ahci_platform_enable_phys - Enable PHYs
* @hpriv: host private area to store config values
*
* This function enables all the PHYs found in hpriv->phys, if any.
* If a PHY fails to be enabled, it disables all the PHYs already
* enabled in reverse order and returns an error.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
{
int rc, i;
for (i = 0; i < hpriv->nports; i++) {
rc = phy_init(hpriv->phys[i]);
if (rc)
goto disable_phys;
rc = phy_set_mode(hpriv->phys[i], PHY_MODE_SATA);
if (rc) {
phy_exit(hpriv->phys[i]);
goto disable_phys;
}
rc = phy_power_on(hpriv->phys[i]);
if (rc) {
phy_exit(hpriv->phys[i]);
goto disable_phys;
}
}
return 0;
disable_phys:
while (--i >= 0) {
phy_power_off(hpriv->phys[i]);
phy_exit(hpriv->phys[i]);
}
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_phys);
/**
* ahci_platform_disable_phys - Disable PHYs
* @hpriv: host private area to store config values
*
* This function disables all PHYs found in hpriv->phys.
*/
void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
{
int i;
for (i = 0; i < hpriv->nports; i++) {
phy_power_off(hpriv->phys[i]);
phy_exit(hpriv->phys[i]);
}
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_phys);
/**
* ahci_platform_find_clk - Find platform clock
* @hpriv: host private area to store config values
* @con_id: clock connection ID
*
* This function returns a pointer to the clock descriptor of the clock with
* the passed ID.
*
* RETURNS:
* Pointer to the clock descriptor on success otherwise NULL
*/
struct clk *ahci_platform_find_clk(struct ahci_host_priv *hpriv, const char *con_id)
{
int i;
for (i = 0; i < hpriv->n_clks; i++) {
if (hpriv->clks[i].id && !strcmp(hpriv->clks[i].id, con_id))
return hpriv->clks[i].clk;
}
return NULL;
}
EXPORT_SYMBOL_GPL(ahci_platform_find_clk);
/**
* ahci_platform_enable_clks - Enable platform clocks
* @hpriv: host private area to store config values
*
* This function enables all the clks found for the AHCI device.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
{
return clk_bulk_prepare_enable(hpriv->n_clks, hpriv->clks);
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
/**
* ahci_platform_disable_clks - Disable platform clocks
* @hpriv: host private area to store config values
*
* This function disables all the clocks enabled before
* (bulk-clocks-disable function is supposed to do that in reverse
* from the enabling procedure order).
*/
void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
{
clk_bulk_disable_unprepare(hpriv->n_clks, hpriv->clks);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
/**
* ahci_platform_deassert_rsts - Deassert/trigger platform resets
* @hpriv: host private area to store config values
*
* This function deasserts or triggers all the reset lines found for
* the AHCI device.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_deassert_rsts(struct ahci_host_priv *hpriv)
{
if (hpriv->f_rsts & AHCI_PLATFORM_RST_TRIGGER)
return reset_control_reset(hpriv->rsts);
return reset_control_deassert(hpriv->rsts);
}
EXPORT_SYMBOL_GPL(ahci_platform_deassert_rsts);
/**
* ahci_platform_assert_rsts - Assert/rearm platform resets
* @hpriv: host private area to store config values
*
* This function asserts or rearms (for self-deasserting resets) all
* the reset controls found for the AHCI device.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_assert_rsts(struct ahci_host_priv *hpriv)
{
if (hpriv->f_rsts & AHCI_PLATFORM_RST_TRIGGER)
return reset_control_rearm(hpriv->rsts);
return reset_control_assert(hpriv->rsts);
}
EXPORT_SYMBOL_GPL(ahci_platform_assert_rsts);
/**
* ahci_platform_enable_regulators - Enable regulators
* @hpriv: host private area to store config values
*
* This function enables all the regulators found in controller and
* hpriv->target_pwrs, if any. If a regulator fails to be enabled, it
* disables all the regulators already enabled in reverse order and
* returns an error.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
{
int rc, i;
rc = regulator_enable(hpriv->ahci_regulator);
if (rc)
return rc;
rc = regulator_enable(hpriv->phy_regulator);
if (rc)
goto disable_ahci_pwrs;
for (i = 0; i < hpriv->nports; i++) {
if (!hpriv->target_pwrs[i])
continue;
rc = regulator_enable(hpriv->target_pwrs[i]);
if (rc)
goto disable_target_pwrs;
}
return 0;
disable_target_pwrs:
while (--i >= 0)
if (hpriv->target_pwrs[i])
regulator_disable(hpriv->target_pwrs[i]);
regulator_disable(hpriv->phy_regulator);
disable_ahci_pwrs:
regulator_disable(hpriv->ahci_regulator);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
/**
* ahci_platform_disable_regulators - Disable regulators
* @hpriv: host private area to store config values
*
* This function disables all regulators found in hpriv->target_pwrs and
* AHCI controller.
*/
void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
{
int i;
for (i = 0; i < hpriv->nports; i++) {
if (!hpriv->target_pwrs[i])
continue;
regulator_disable(hpriv->target_pwrs[i]);
}
regulator_disable(hpriv->ahci_regulator);
regulator_disable(hpriv->phy_regulator);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
/**
* ahci_platform_enable_resources - Enable platform resources
* @hpriv: host private area to store config values
*
* This function enables all ahci_platform managed resources in the
* following order:
* 1) Regulator
* 2) Clocks (through ahci_platform_enable_clks)
* 3) Resets
* 4) Phys
*
* If resource enabling fails at any point the previous enabled resources
* are disabled in reverse order.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
{
int rc;
rc = ahci_platform_enable_regulators(hpriv);
if (rc)
return rc;
rc = ahci_platform_enable_clks(hpriv);
if (rc)
goto disable_regulator;
rc = ahci_platform_deassert_rsts(hpriv);
if (rc)
goto disable_clks;
rc = ahci_platform_enable_phys(hpriv);
if (rc)
goto disable_rsts;
return 0;
disable_rsts:
ahci_platform_assert_rsts(hpriv);
disable_clks:
ahci_platform_disable_clks(hpriv);
disable_regulator:
ahci_platform_disable_regulators(hpriv);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
/**
* ahci_platform_disable_resources - Disable platform resources
* @hpriv: host private area to store config values
*
* This function disables all ahci_platform managed resources in the
* following order:
* 1) Phys
* 2) Resets
* 3) Clocks (through ahci_platform_disable_clks)
* 4) Regulator
*/
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
{
ahci_platform_disable_phys(hpriv);
ahci_platform_assert_rsts(hpriv);
ahci_platform_disable_clks(hpriv);
ahci_platform_disable_regulators(hpriv);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
static void ahci_platform_put_resources(struct device *dev, void *res)
{
struct ahci_host_priv *hpriv = res;
int c;
if (hpriv->got_runtime_pm) {
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
}
/*
* The regulators are tied to child node device and not to the
* SATA device itself. So we can't use devm for automatically
* releasing them. We have to do it manually here.
*/
for (c = 0; c < hpriv->nports; c++)
if (hpriv->target_pwrs && hpriv->target_pwrs[c])
regulator_put(hpriv->target_pwrs[c]);
kfree(hpriv->target_pwrs);
}
static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
struct device *dev, struct device_node *node)
{
int rc;
hpriv->phys[port] = devm_of_phy_get(dev, node, NULL);
if (!IS_ERR(hpriv->phys[port]))
return 0;
rc = PTR_ERR(hpriv->phys[port]);
switch (rc) {
case -ENOSYS:
/* No PHY support. Check if PHY is required. */
if (of_property_present(node, "phys")) {
dev_err(dev,
"couldn't get PHY in node %pOFn: ENOSYS\n",
node);
break;
}
fallthrough;
case -ENODEV:
/* continue normally */
hpriv->phys[port] = NULL;
rc = 0;
break;
case -EPROBE_DEFER:
/* Do not complain yet */
break;
default:
dev_err(dev,
"couldn't get PHY in node %pOFn: %d\n",
node, rc);
break;
}
return rc;
}
static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
struct device *dev)
{
struct regulator *target_pwr;
int rc = 0;
target_pwr = regulator_get(dev, "target");
if (!IS_ERR(target_pwr))
hpriv->target_pwrs[port] = target_pwr;
else
rc = PTR_ERR(target_pwr);
return rc;
}
static int ahci_platform_get_firmware(struct ahci_host_priv *hpriv,
struct device *dev)
{
u32 port;
if (!of_property_read_u32(dev->of_node, "hba-cap", &hpriv->saved_cap))
hpriv->saved_cap &= (HOST_CAP_SSS | HOST_CAP_MPS);
of_property_read_u32(dev->of_node,
"ports-implemented", &hpriv->saved_port_map);
for_each_child_of_node_scoped(dev->of_node, child) {
if (!of_device_is_available(child))
continue;
if (of_property_read_u32(child, "reg", &port))
return -EINVAL;
if (!of_property_read_u32(child, "hba-port-cap", &hpriv->saved_port_cap[port]))
hpriv->saved_port_cap[port] &= PORT_CMD_CAP;
}
return 0;
}
/**
* ahci_platform_get_resources - Get platform resources
* @pdev: platform device to get resources for
* @flags: bitmap representing the resource to get
*
* This function allocates an ahci_host_priv struct, and gets the following
* resources, storing a reference to them inside the returned struct:
*
* 1) mmio registers (IORESOURCE_MEM 0, mandatory)
* 2) regulator for controlling the targets power (optional)
* regulator for controlling the AHCI controller (optional)
* 3) all clocks specified in the devicetree node, or a single
* clock for non-OF platforms (optional)
* 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional)
* 5) phys (optional)
*
* RETURNS:
* The allocated ahci_host_priv on success, otherwise an ERR_PTR value
*/
struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
unsigned int flags)
{
int child_nodes, rc = -ENOMEM, enabled_ports = 0;
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
u32 mask_port_map = 0;
if (!devres_open_group(dev, NULL, GFP_KERNEL))
return ERR_PTR(-ENOMEM);
hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
GFP_KERNEL);
if (!hpriv)
goto err_out;
devres_add(dev, hpriv);
/*
* If the DT provided an "ahci" named resource, use it. Otherwise,
* fallback to using the default first resource for the device node.
*/
if (platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci"))
hpriv->mmio = devm_platform_ioremap_resource_byname(pdev, "ahci");
else
hpriv->mmio = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(hpriv->mmio)) {
rc = PTR_ERR(hpriv->mmio);
goto err_out;
}
/*
* Bulk clocks getting procedure can fail to find any clock due to
* running on a non-OF platform or due to the clocks being defined in
* bypass of the DT firmware (like da850, spear13xx). In that case we
* fallback to getting a single clock source right from the dev clocks
* list.
*/
rc = devm_clk_bulk_get_all(dev, &hpriv->clks);
if (rc < 0)
goto err_out;
if (rc > 0) {
/* Got clocks in bulk */
hpriv->n_clks = rc;
} else {
/*
* No clock bulk found: fallback to manually getting
* the optional clock.
*/
hpriv->clks = devm_kzalloc(dev, sizeof(*hpriv->clks), GFP_KERNEL);
if (!hpriv->clks) {
rc = -ENOMEM;
goto err_out;
}
hpriv->clks->clk = devm_clk_get_optional(dev, NULL);
if (IS_ERR(hpriv->clks->clk)) {
rc = PTR_ERR(hpriv->clks->clk);
goto err_out;
} else if (hpriv->clks->clk) {
hpriv->clks->id = "ahci";
hpriv->n_clks = 1;
}
}
hpriv->ahci_regulator = devm_regulator_get(dev, "ahci");
if (IS_ERR(hpriv->ahci_regulator)) {
rc = PTR_ERR(hpriv->ahci_regulator);
if (rc != 0)
goto err_out;
}
hpriv->phy_regulator = devm_regulator_get(dev, "phy");
if (IS_ERR(hpriv->phy_regulator)) {
rc = PTR_ERR(hpriv->phy_regulator);
goto err_out;
}
if (flags & AHCI_PLATFORM_GET_RESETS) {
hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
if (IS_ERR(hpriv->rsts)) {
rc = PTR_ERR(hpriv->rsts);
goto err_out;
}
hpriv->f_rsts = flags & AHCI_PLATFORM_RST_TRIGGER;
}
/*
* Too many sub-nodes most likely means having something wrong with
* the firmware.
*/
child_nodes = of_get_child_count(dev->of_node);
if (child_nodes > AHCI_MAX_PORTS) {
rc = -EINVAL;
goto err_out;
}
/*
* If no sub-node was found, we still need to set nports to
* one in order to be able to use the
* ahci_platform_[en|dis]able_[phys|regulators] functions.
*/
if (child_nodes)
hpriv->nports = child_nodes;
else
hpriv->nports = 1;
hpriv->phys = devm_kcalloc(dev, hpriv->nports, sizeof(*hpriv->phys), GFP_KERNEL);
if (!hpriv->phys) {
rc = -ENOMEM;
goto err_out;
}
/*
* We cannot use devm_ here, since ahci_platform_put_resources() uses
* target_pwrs after devm_ have freed memory
*/
hpriv->target_pwrs = kcalloc(hpriv->nports, sizeof(*hpriv->target_pwrs), GFP_KERNEL);
if (!hpriv->target_pwrs) {
rc = -ENOMEM;
goto err_out;
}
if (child_nodes) {
for_each_child_of_node_scoped(dev->of_node, child) {
u32 port;
struct platform_device *port_dev __maybe_unused;
if (!of_device_is_available(child))
continue;
if (of_property_read_u32(child, "reg", &port)) {
rc = -EINVAL;
goto err_out;
}
if (port >= hpriv->nports) {
dev_warn(dev, "invalid port number %d\n", port);
continue;
}
mask_port_map |= BIT(port);
#ifdef CONFIG_OF_ADDRESS
of_platform_device_create(child, NULL, NULL);
port_dev = of_find_device_by_node(child);
if (port_dev) {
rc = ahci_platform_get_regulator(hpriv, port,
&port_dev->dev);
if (rc == -EPROBE_DEFER)
goto err_out;
}
#endif
rc = ahci_platform_get_phy(hpriv, port, dev, child);
if (rc)
goto err_out;
enabled_ports++;
}
if (!enabled_ports) {
dev_warn(dev, "No port enabled\n");
rc = -ENODEV;
goto err_out;
}
if (!hpriv->mask_port_map)
hpriv->mask_port_map = mask_port_map;
} else {
/*
* If no sub-node was found, keep this for device tree
* compatibility
*/
rc = ahci_platform_get_phy(hpriv, 0, dev, dev->of_node);
if (rc)
goto err_out;
rc = ahci_platform_get_regulator(hpriv, 0, dev);
if (rc == -EPROBE_DEFER)
goto err_out;
}
/*
* Retrieve firmware-specific flags which then will be used to set
* the HW-init fields of HBA and its ports
*/
rc = ahci_platform_get_firmware(hpriv, dev);
if (rc)
goto err_out;
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
hpriv->got_runtime_pm = true;
devres_remove_group(dev, NULL);
return hpriv;
err_out:
devres_release_group(dev, NULL);
return ERR_PTR(rc);
}
EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
/**
* ahci_platform_init_host - Bring up an ahci-platform host
* @pdev: platform device pointer for the host
* @hpriv: ahci-host private data for the host
* @pi_template: template for the ata_port_info to use
* @sht: scsi_host_template to use when registering
*
* This function does all the usual steps needed to bring up an
* ahci-platform host, note any necessary resources (ie clks, phys, etc.)
* must be initialized / enabled before calling this.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_init_host(struct platform_device *pdev,
struct ahci_host_priv *hpriv,
const struct ata_port_info *pi_template,
const struct scsi_host_template *sht)
{
struct device *dev = &pdev->dev;
struct ata_port_info pi = *pi_template;
const struct ata_port_info *ppi[] = { &pi, NULL };
struct ata_host *host;
int i, irq, n_ports, rc;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
if (!irq)
return -EINVAL;
hpriv->irq = irq;
/* prepare host */
pi.private_data = (void *)(unsigned long)hpriv->flags;
ahci_save_initial_config(dev, hpriv);
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
ahci_set_em_messages(hpriv, &pi);
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
* both CAP.NP and port_map.
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
if (!host)
return -ENOMEM;
host->private_data = hpriv;
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
else
dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
ata_port_desc(ap, "mmio %pR",
platform_get_resource(pdev, IORESOURCE_MEM, 0));
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set enclosure management message type */
if (ap->flags & ATA_FLAG_EM)
ap->em_message_type = hpriv->em_msg_type;
/* disabled/not-implemented port */
if (!(hpriv->port_map & (1 << i)))
ap->ops = &ata_dummy_port_ops;
}
if (hpriv->cap & HOST_CAP_64) {
rc = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64));
if (rc) {
dev_err(dev, "Failed to enable 64-bit DMA.\n");
return rc;
}
}
rc = ahci_reset_controller(host);
if (rc)
return rc;
ahci_init_controller(host);
ahci_print_info(host, "platform");
return ahci_host_activate(host, sht);
}
EXPORT_SYMBOL_GPL(ahci_platform_init_host);
static void ahci_host_stop(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
ahci_platform_disable_resources(hpriv);
}
/**
* ahci_platform_shutdown - Disable interrupts and stop DMA for host ports
* @pdev: platform device pointer for the host
*
* This function is called during system shutdown and performs the minimal
* deconfiguration required to ensure that an ahci_platform host cannot
* corrupt or otherwise interfere with a new kernel being started with kexec.
*/
void ahci_platform_shutdown(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
int i;
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
/* Disable port interrupts */
if (ap->ops->freeze)
ap->ops->freeze(ap);
/* Stop the port DMA engines */
if (ap->ops->port_stop)
ap->ops->port_stop(ap);
}
/* Disable and clear host interrupts */
writel(readl(mmio + HOST_CTL) & ~HOST_IRQ_EN, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
writel(GENMASK(host->n_ports, 0), mmio + HOST_IRQ_STAT);
}
EXPORT_SYMBOL_GPL(ahci_platform_shutdown);
#ifdef CONFIG_PM_SLEEP
/**
* ahci_platform_suspend_host - Suspend an ahci-platform host
* @dev: device pointer for the host
*
* This function does all the usual steps needed to suspend an
* ahci-platform host, note any necessary resources (ie clks, phys, etc.)
* must be disabled after calling this.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_suspend_host(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
u32 ctl;
if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_err(dev, "firmware update required for suspend/resume\n");
return -EIO;
}
/*
* AHCI spec rev1.1 section 8.3.3:
* Software must disable interrupts prior to requesting a
* transition of the HBA to D3 state.
*/
ctl = readl(mmio + HOST_CTL);
ctl &= ~HOST_IRQ_EN;
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
if (hpriv->flags & AHCI_HFLAG_SUSPEND_PHYS)
ahci_platform_disable_phys(hpriv);
ata_host_suspend(host, PMSG_SUSPEND);
return 0;
}
EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
/**
* ahci_platform_resume_host - Resume an ahci-platform host
* @dev: device pointer for the host
*
* This function does all the usual steps needed to resume an ahci-platform
* host, note any necessary resources (ie clks, phys, etc.) must be
* initialized / enabled before calling this.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_resume_host(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
int rc;
if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
rc = ahci_reset_controller(host);
if (rc)
return rc;
ahci_init_controller(host);
}
if (hpriv->flags & AHCI_HFLAG_SUSPEND_PHYS)
ahci_platform_enable_phys(hpriv);
ata_host_resume(host);
return 0;
}
EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
/**
* ahci_platform_suspend - Suspend an ahci-platform device
* @dev: the platform device to suspend
*
* This function suspends the host associated with the device, followed by
* disabling all the resources of the device.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
int rc;
rc = ahci_platform_suspend_host(dev);
if (rc)
return rc;
ahci_platform_disable_resources(hpriv);
return 0;
}
EXPORT_SYMBOL_GPL(ahci_platform_suspend);
/**
* ahci_platform_resume - Resume an ahci-platform device
* @dev: the platform device to resume
*
* This function enables all the resources of the device followed by
* resuming the host associated with the device.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_resume(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
int rc;
rc = ahci_platform_enable_resources(hpriv);
if (rc)
return rc;
rc = ahci_platform_resume_host(dev);
if (rc)
goto disable_resources;
/* We resumed so update PM runtime state */
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
return 0;
disable_resources:
ahci_platform_disable_resources(hpriv);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_resume);
#endif
MODULE_DESCRIPTION("AHCI SATA platform library");
MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
MODULE_LICENSE("GPL");