mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 21:54:11 +08:00
9f16d5e6f2
essentially guessing which pfns are refcounted pages. The reason to
do so was that KVM needs to map both non-refcounted pages (for example
BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP VMAs that contain
refcounted pages. However, the result was security issues in the past,
and more recently the inability to map VM_IO and VM_PFNMAP memory
that _is_ backed by struct page but is not refcounted. In particular
this broke virtio-gpu blob resources (which directly map host graphics
buffers into the guest as "vram" for the virtio-gpu device) with the
amdgpu driver, because amdgpu allocates non-compound higher order pages
and the tail pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the per-architecture
code, to always work on the pfn whenever possible. The large series that
did this, from David Stevens and Sean Christopherson, also cleaned up
substantially the set of functions that provided arch code with the
pfn for a host virtual addresses. The previous maze of twisty little
passages, all different, is replaced by five functions (__gfn_to_page,
__kvm_faultin_pfn, the non-__ versions of these two, and kvm_prefetch_pages)
saving almost 200 lines of code.
ARM:
* Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
* Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
was introduced in PSCIv1.3 as a mechanism to request hibernation,
similar to the S4 state in ACPI
* Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
* PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
* Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
* Avoid emulated MMIO completion if userspace has requested synchronous
external abort injection
* Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
* Add iocsr and mmio bus simulation in kernel.
* Add in-kernel interrupt controller emulation.
* Add support for virtualization extensions to the eiointc irqchip.
PPC:
* Drop lingering and utterly obsolete references to PPC970 KVM, which was
removed 10 years ago.
* Fix incorrect documentation references to non-existing ioctls
RISC-V:
* Accelerate KVM RISC-V when running as a guest
* Perf support to collect KVM guest statistics from host side
s390:
* New selftests: more ucontrol selftests and CPU model sanity checks
* Support for the gen17 CPU model
* List registers supported by KVM_GET/SET_ONE_REG in the documentation
x86:
* Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve
documentation, harden against unexpected changes. Even if the hardware
A/D tracking is disabled, it is possible to use the hardware-defined A/D
bits to track if a PFN is Accessed and/or Dirty, and that removes a lot
of special cases.
* Elide TLB flushes when aging secondary PTEs, as has been done in x86's
primary MMU for over 10 years.
* Recover huge pages in-place in the TDP MMU when dirty page logging is
toggled off, instead of zapping them and waiting until the page is
re-accessed to create a huge mapping. This reduces vCPU jitter.
* Batch TLB flushes when dirty page logging is toggled off. This reduces
the time it takes to disable dirty logging by ~3x.
* Remove the shrinker that was (poorly) attempting to reclaim shadow page
tables in low-memory situations.
* Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE.
* Advertise CPUIDs for new instructions in Clearwater Forest
* Quirk KVM's misguided behavior of initialized certain feature MSRs to
their maximum supported feature set, which can result in KVM creating
invalid vCPU state. E.g. initializing PERF_CAPABILITIES to a non-zero
value results in the vCPU having invalid state if userspace hides PDCM
from the guest, which in turn can lead to save/restore failures.
* Fix KVM's handling of non-canonical checks for vCPUs that support LA57
to better follow the "architecture", in quotes because the actual
behavior is poorly documented. E.g. most MSR writes and descriptor
table loads ignore CR4.LA57 and operate purely on whether the CPU
supports LA57.
* Bypass the register cache when querying CPL from kvm_sched_out(), as
filling the cache from IRQ context is generally unsafe; harden the
cache accessors to try to prevent similar issues from occuring in the
future. The issue that triggered this change was already fixed in 6.12,
but was still kinda latent.
* Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM
over-advertises SPEC_CTRL when trying to support cross-vendor VMs.
* Minor cleanups
* Switch hugepage recovery thread to use vhost_task. These kthreads can
consume significant amounts of CPU time on behalf of a VM or in response
to how the VM behaves (for example how it accesses its memory); therefore
KVM tried to place the thread in the VM's cgroups and charge the CPU
time consumed by that work to the VM's container. However the kthreads
did not process SIGSTOP/SIGCONT, and therefore cgroups which had KVM
instances inside could not complete freezing. Fix this by replacing the
kthread with a PF_USER_WORKER thread, via the vhost_task abstraction.
Another 100+ lines removed, with generally better behavior too like
having these threads properly parented in the process tree.
* Revert a workaround for an old CPU erratum (Nehalem/Westmere) that didn't
really work; there was really nothing to work around anyway: the broken
patch was meant to fix nested virtualization, but the PERF_GLOBAL_CTRL
MSR is virtualized and therefore unaffected by the erratum.
* Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is 'y'.
x86 selftests:
* x86 selftests can now use AVX.
Documentation:
* Use rST internal links
* Reorganize the introduction to the API document
Generic:
* Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead
of RCU, so that running a vCPU on a different task doesn't encounter long
due to having to wait for all CPUs become quiescent. In general both reads
and writes are rare, but userspace that supports confidential computing is
introducing the use of "helper" vCPUs that may jump from one host processor
to another. Those will be very happy to trigger a synchronize_rcu(), and
the effect on performance is quite the disaster.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmc9MRYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP00QgArxqxBIGLCW5t7bw7vtNq63QYRyh4
dTiDguLiYQJ+AXmnRu11R6aPC7HgMAvlFCCmH+GEce4WEgt26hxCmncJr/aJOSwS
letCS7TrME16PeZvh25A1nhPBUw6mTF1qqzgcdHMrqXG8LuHoGcKYGSRVbkf3kfI
1ZoMq1r8ChXbVVmCx9DQ3gw1TVr5Dpjs2voLh8rDSE9Xpw0tVVabHu3/NhQEz/F+
t8/nRaqH777icCHIf9PCk5HnarHxLAOvhM2M0Yj09PuBcE5fFQxpxltw/qiKQqqW
ep4oquojGl87kZnhlDaac2UNtK90Ws+WxxvCwUmbvGN0ZJVaQwf4FvTwig==
=lWpE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
||
|---|---|---|
| .. | ||
| acpi_object_usage.rst | ||
| amu.rst | ||
| arm-acpi.rst | ||
| arm-cca.rst | ||
| asymmetric-32bit.rst | ||
| booting.rst | ||
| cpu-feature-registers.rst | ||
| cpu-hotplug.rst | ||
| elf_hwcaps.rst | ||
| features.rst | ||
| gcs.rst | ||
| hugetlbpage.rst | ||
| index.rst | ||
| kasan-offsets.sh | ||
| kdump.rst | ||
| legacy_instructions.rst | ||
| memory-tagging-extension.rst | ||
| memory.rst | ||
| mops.rst | ||
| perf.rst | ||
| pointer-authentication.rst | ||
| ptdump.rst | ||
| silicon-errata.rst | ||
| sme.rst | ||
| sve.rst | ||
| tagged-address-abi.rst | ||
| tagged-pointers.rst | ||