mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
14a3ca56c0
AM64 SoC contains the GPMC NAND controller. Add compatible for it. Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211209090458.24830-2-rogerq@kernel.org
130 lines
3.2 KiB
YAML
130 lines
3.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mtd/ti,gpmc-nand.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Texas Instruments GPMC NAND Flash controller.
|
|
|
|
maintainers:
|
|
- Tony Lindgren <tony@atomide.com>
|
|
- Roger Quadros <rogerq@kernel.org>
|
|
|
|
description:
|
|
GPMC NAND controller/Flash is represented as a child of the
|
|
GPMC controller node.
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- ti,am64-nand
|
|
- ti,omap2-nand
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
items:
|
|
- description: Interrupt for fifoevent
|
|
- description: Interrupt for termcount
|
|
|
|
"#address-cells": true
|
|
|
|
"#size-cells": true
|
|
|
|
ti,nand-ecc-opt:
|
|
description: Desired ECC algorithm
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
enum: [sw, ham1, bch4, bch8, bch16]
|
|
|
|
ti,nand-xfer-type:
|
|
description: Data transfer method between controller and chip.
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
enum: [prefetch-polled, polled, prefetch-dma, prefetch-irq]
|
|
default: prefetch-polled
|
|
|
|
ti,elm-id:
|
|
description:
|
|
phandle to the ELM (Error Location Module).
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
|
|
nand-bus-width:
|
|
description:
|
|
Bus width to the NAND chip
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [8, 16]
|
|
default: 8
|
|
|
|
rb-gpios:
|
|
description:
|
|
GPIO connection to R/B signal from NAND chip
|
|
maxItems: 1
|
|
|
|
patternProperties:
|
|
"@[0-9a-f]+$":
|
|
$ref: "/schemas/mtd/partitions/partition.yaml"
|
|
|
|
allOf:
|
|
- $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml"
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- ti,nand-ecc-opt
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
gpmc: memory-controller@50000000 {
|
|
compatible = "ti,am3352-gpmc";
|
|
dmas = <&edma 52 0>;
|
|
dma-names = "rxtx";
|
|
clocks = <&l3s_gclk>;
|
|
clock-names = "fck";
|
|
reg = <0x50000000 0x2000>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpmc,num-cs = <7>;
|
|
gpmc,num-waitpins = <2>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
|
|
nand@0,0 {
|
|
compatible = "ti,omap2-nand";
|
|
reg = <0 0 4>; /* device IO registers */
|
|
interrupt-parent = <&gpmc>;
|
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
|
ti,nand-xfer-type = "prefetch-dma";
|
|
ti,nand-ecc-opt = "bch16";
|
|
ti,elm-id = <&elm>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/* NAND generic properties */
|
|
nand-bus-width = <8>;
|
|
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
|
|
|
|
/* GPMC properties*/
|
|
gpmc,device-width = <1>;
|
|
|
|
partition@0 {
|
|
label = "NAND.SPL";
|
|
reg = <0x00000000 0x00040000>;
|
|
};
|
|
partition@1 {
|
|
label = "NAND.SPL.backup1";
|
|
reg = <0x00040000 0x00040000>;
|
|
};
|
|
};
|
|
};
|