mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
e38cd53421
[ Upstream commit6b17a597fc
] Probe of Sohard Arcnet cards fails, if 2 or more cards are installed in a system. See kernel log: [ 2.759203] arcnet: arcnet loaded [ 2.763648] arcnet:com20020: COM20020 chipset support (by David Woodhouse et al.) [ 2.770585] arcnet:com20020_pci: COM20020 PCI support [ 2.772295] com20020 0000:02:00.0: enabling device (0000 -> 0003) [ 2.772354] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.071301] com20020 0000:02:00.0 arc0-0 (uninitialized): PCI COM20020: station FFh found at F080h, IRQ 101. [ 3.071305] com20020 0000:02:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.071534] com20020 0000:07:00.0: enabling device (0000 -> 0003) [ 3.071581] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.369501] com20020 0000:07:00.0: Led pci:green:tx:0-0 renamed to pci:green:tx:0-0_1 due to name collision [ 3.369535] com20020 0000:07:00.0: Led pci:red:recon:0-0 renamed to pci:red:recon:0-0_1 due to name collision [ 3.370586] com20020 0000:07:00.0 arc0-0 (uninitialized): PCI COM20020: station E1h found at C000h, IRQ 35. [ 3.370589] com20020 0000:07:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.370608] com20020: probe of 0000:07:00.0 failed with error -5 commit5ef216c1f8
("arcnet: com20020-pci: add rotary index support") changes the device name of all COM20020 based PCI cards, even if only some cards support this: snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); The error happens because all Sohard Arcnet cards would be called arc0-0, since the Sohard Arcnet cards don't have a PLX rotary coder. I.e. EAE Arcnet cards have a PLX rotary coder, which sets the first decimal, ensuring unique devices names. This patch adds two new card feature flags to indicate which cards support LEDs and the PLX rotary coder. For EAE based cards the names still depend on the PLX rotary coder (untested, since missing EAE hardware). For Sohard based cards, this patch will result in devices being called arc0, arc1, ... (tested). Signed-off-by: Thomas Reichinger <thomas.reichinger@sohard.de> Fixes:5ef216c1f8
("arcnet: com20020-pci: add rotary index support") Link: https://lore.kernel.org/r/20231130113503.6812-1-thomas.reichinger@sohard.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
619 lines
12 KiB
C
619 lines
12 KiB
C
/*
|
|
* Linux ARCnet driver - COM20020 PCI support
|
|
* Contemporary Controls PCI20 and SOHARD SH-ARC PCI
|
|
*
|
|
* Written 1994-1999 by Avery Pennarun,
|
|
* based on an ISA version by David Woodhouse.
|
|
* Written 1999-2000 by Martin Mares <mj@ucw.cz>.
|
|
* Derived from skeleton.c by Donald Becker.
|
|
*
|
|
* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
|
|
* for sponsoring the further development of this driver.
|
|
*
|
|
* **********************
|
|
*
|
|
* The original copyright of skeleton.c was as follows:
|
|
*
|
|
* skeleton.c Written 1993 by Donald Becker.
|
|
* Copyright 1993 United States Government as represented by the
|
|
* Director, National Security Agency. This software may only be used
|
|
* and distributed according to the terms of the GNU General Public License as
|
|
* modified by SRC, incorporated herein by reference.
|
|
*
|
|
* **********************
|
|
*
|
|
* For more details, see drivers/net/arcnet.c
|
|
*
|
|
* **********************
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/list.h>
|
|
#include <linux/io.h>
|
|
#include <linux/leds.h>
|
|
|
|
#include "arcdevice.h"
|
|
#include "com20020.h"
|
|
|
|
/* Module parameters */
|
|
|
|
static int node;
|
|
static char device[9]; /* use eg. device="arc1" to change name */
|
|
static int timeout = 3;
|
|
static int backplane;
|
|
static int clockp;
|
|
static int clockm;
|
|
|
|
module_param(node, int, 0);
|
|
module_param_string(device, device, sizeof(device), 0);
|
|
module_param(timeout, int, 0);
|
|
module_param(backplane, int, 0);
|
|
module_param(clockp, int, 0);
|
|
module_param(clockm, int, 0);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static void led_tx_set(struct led_classdev *led_cdev,
|
|
enum led_brightness value)
|
|
{
|
|
struct com20020_dev *card;
|
|
struct com20020_priv *priv;
|
|
struct com20020_pci_card_info *ci;
|
|
|
|
card = container_of(led_cdev, struct com20020_dev, tx_led);
|
|
|
|
priv = card->pci_priv;
|
|
ci = priv->ci;
|
|
|
|
outb(!!value, priv->misc + ci->leds[card->index].green);
|
|
}
|
|
|
|
static void led_recon_set(struct led_classdev *led_cdev,
|
|
enum led_brightness value)
|
|
{
|
|
struct com20020_dev *card;
|
|
struct com20020_priv *priv;
|
|
struct com20020_pci_card_info *ci;
|
|
|
|
card = container_of(led_cdev, struct com20020_dev, recon_led);
|
|
|
|
priv = card->pci_priv;
|
|
ci = priv->ci;
|
|
|
|
outb(!!value, priv->misc + ci->leds[card->index].red);
|
|
}
|
|
|
|
static ssize_t backplane_mode_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct net_device *net_dev = to_net_dev(dev);
|
|
struct arcnet_local *lp = netdev_priv(net_dev);
|
|
|
|
return sprintf(buf, "%s\n", lp->backplane ? "true" : "false");
|
|
}
|
|
static DEVICE_ATTR_RO(backplane_mode);
|
|
|
|
static struct attribute *com20020_state_attrs[] = {
|
|
&dev_attr_backplane_mode.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group com20020_state_group = {
|
|
.name = NULL,
|
|
.attrs = com20020_state_attrs,
|
|
};
|
|
|
|
static void com20020pci_remove(struct pci_dev *pdev);
|
|
|
|
static int com20020pci_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
struct com20020_pci_card_info *ci;
|
|
struct com20020_pci_channel_map *mm;
|
|
struct net_device *dev;
|
|
struct arcnet_local *lp;
|
|
struct com20020_priv *priv;
|
|
int i, ioaddr, ret;
|
|
struct resource *r;
|
|
|
|
ret = 0;
|
|
|
|
if (pci_enable_device(pdev))
|
|
return -EIO;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(struct com20020_priv),
|
|
GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
ci = (struct com20020_pci_card_info *)id->driver_data;
|
|
if (!ci)
|
|
return -EINVAL;
|
|
|
|
priv->ci = ci;
|
|
mm = &ci->misc_map;
|
|
|
|
pci_set_drvdata(pdev, priv);
|
|
|
|
INIT_LIST_HEAD(&priv->list_dev);
|
|
|
|
if (mm->size) {
|
|
ioaddr = pci_resource_start(pdev, mm->bar) + mm->offset;
|
|
r = devm_request_region(&pdev->dev, ioaddr, mm->size,
|
|
"com20020-pci");
|
|
if (!r) {
|
|
pr_err("IO region %xh-%xh already allocated.\n",
|
|
ioaddr, ioaddr + mm->size - 1);
|
|
return -EBUSY;
|
|
}
|
|
priv->misc = ioaddr;
|
|
}
|
|
|
|
for (i = 0; i < ci->devcount; i++) {
|
|
struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i];
|
|
struct com20020_dev *card;
|
|
int dev_id_mask = 0xf;
|
|
|
|
dev = alloc_arcdev(device);
|
|
if (!dev) {
|
|
ret = -ENOMEM;
|
|
break;
|
|
}
|
|
dev->dev_port = i;
|
|
|
|
dev->netdev_ops = &com20020_netdev_ops;
|
|
|
|
lp = netdev_priv(dev);
|
|
|
|
arc_printk(D_NORMAL, dev, "%s Controls\n", ci->name);
|
|
ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset;
|
|
|
|
r = devm_request_region(&pdev->dev, ioaddr, cm->size,
|
|
"com20020-pci");
|
|
if (!r) {
|
|
pr_err("IO region %xh-%xh already allocated\n",
|
|
ioaddr, ioaddr + cm->size - 1);
|
|
ret = -EBUSY;
|
|
goto err_free_arcdev;
|
|
}
|
|
|
|
/* Dummy access after Reset
|
|
* ARCNET controller needs
|
|
* this access to detect bustype
|
|
*/
|
|
arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND);
|
|
arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT);
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
dev->base_addr = ioaddr;
|
|
dev->dev_addr[0] = node;
|
|
dev->sysfs_groups[0] = &com20020_state_group;
|
|
dev->irq = pdev->irq;
|
|
lp->card_name = "PCI COM20020";
|
|
lp->card_flags = ci->flags;
|
|
lp->backplane = backplane;
|
|
lp->clockp = clockp & 7;
|
|
lp->clockm = clockm & 3;
|
|
lp->timeout = timeout;
|
|
lp->hw.owner = THIS_MODULE;
|
|
|
|
lp->backplane = (inb(priv->misc) >> (2 + i)) & 0x1;
|
|
|
|
if (!strncmp(ci->name, "EAE PLX-PCI FB2", 15))
|
|
lp->backplane = 1;
|
|
|
|
if (ci->flags & ARC_HAS_ROTARY) {
|
|
/* Get the dev_id from the PLX rotary coder */
|
|
if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15))
|
|
dev_id_mask = 0x3;
|
|
dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask;
|
|
snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);
|
|
}
|
|
|
|
if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) {
|
|
pr_err("IO address %Xh is empty!\n", ioaddr);
|
|
ret = -EIO;
|
|
goto err_free_arcdev;
|
|
}
|
|
if (com20020_check(dev)) {
|
|
ret = -EIO;
|
|
goto err_free_arcdev;
|
|
}
|
|
|
|
ret = com20020_found(dev, IRQF_SHARED);
|
|
if (ret)
|
|
goto err_free_arcdev;
|
|
|
|
card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev),
|
|
GFP_KERNEL);
|
|
if (!card) {
|
|
ret = -ENOMEM;
|
|
goto err_free_arcdev;
|
|
}
|
|
|
|
card->index = i;
|
|
card->pci_priv = priv;
|
|
|
|
if (ci->flags & ARC_HAS_LED) {
|
|
card->tx_led.brightness_set = led_tx_set;
|
|
card->tx_led.default_trigger = devm_kasprintf(&pdev->dev,
|
|
GFP_KERNEL, "arc%d-%d-tx",
|
|
dev->dev_id, i);
|
|
card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
|
|
"pci:green:tx:%d-%d",
|
|
dev->dev_id, i);
|
|
|
|
card->tx_led.dev = &dev->dev;
|
|
card->recon_led.brightness_set = led_recon_set;
|
|
card->recon_led.default_trigger = devm_kasprintf(&pdev->dev,
|
|
GFP_KERNEL, "arc%d-%d-recon",
|
|
dev->dev_id, i);
|
|
card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
|
|
"pci:red:recon:%d-%d",
|
|
dev->dev_id, i);
|
|
card->recon_led.dev = &dev->dev;
|
|
|
|
ret = devm_led_classdev_register(&pdev->dev, &card->tx_led);
|
|
if (ret)
|
|
goto err_free_arcdev;
|
|
|
|
ret = devm_led_classdev_register(&pdev->dev, &card->recon_led);
|
|
if (ret)
|
|
goto err_free_arcdev;
|
|
|
|
dev_set_drvdata(&dev->dev, card);
|
|
devm_arcnet_led_init(dev, dev->dev_id, i);
|
|
}
|
|
|
|
card->dev = dev;
|
|
list_add(&card->list, &priv->list_dev);
|
|
continue;
|
|
|
|
err_free_arcdev:
|
|
free_arcdev(dev);
|
|
break;
|
|
}
|
|
if (ret)
|
|
com20020pci_remove(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static void com20020pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct com20020_dev *card, *tmpcard;
|
|
struct com20020_priv *priv;
|
|
|
|
priv = pci_get_drvdata(pdev);
|
|
|
|
list_for_each_entry_safe(card, tmpcard, &priv->list_dev, list) {
|
|
struct net_device *dev = card->dev;
|
|
|
|
unregister_netdev(dev);
|
|
free_irq(dev->irq, dev);
|
|
free_arcdev(dev);
|
|
}
|
|
}
|
|
|
|
static struct com20020_pci_card_info card_info_10mbit = {
|
|
.name = "ARC-PCI",
|
|
.devcount = 1,
|
|
.chan_map_tbl = {
|
|
{
|
|
.bar = 2,
|
|
.offset = 0x00,
|
|
.size = 0x08,
|
|
},
|
|
},
|
|
.flags = ARC_CAN_10MBIT,
|
|
};
|
|
|
|
static struct com20020_pci_card_info card_info_5mbit = {
|
|
.name = "ARC-PCI",
|
|
.devcount = 1,
|
|
.chan_map_tbl = {
|
|
{
|
|
.bar = 2,
|
|
.offset = 0x00,
|
|
.size = 0x08,
|
|
},
|
|
},
|
|
.flags = ARC_IS_5MBIT,
|
|
};
|
|
|
|
static struct com20020_pci_card_info card_info_sohard = {
|
|
.name = "SOHARD SH ARC-PCI",
|
|
.devcount = 1,
|
|
/* SOHARD needs PCI base addr 4 */
|
|
.chan_map_tbl = {
|
|
{
|
|
.bar = 4,
|
|
.offset = 0x00,
|
|
.size = 0x08
|
|
},
|
|
},
|
|
.flags = ARC_CAN_10MBIT,
|
|
};
|
|
|
|
static struct com20020_pci_card_info card_info_eae_arc1 = {
|
|
.name = "EAE PLX-PCI ARC1",
|
|
.devcount = 1,
|
|
.chan_map_tbl = {
|
|
{
|
|
.bar = 2,
|
|
.offset = 0x00,
|
|
.size = 0x08,
|
|
},
|
|
},
|
|
.misc_map = {
|
|
.bar = 2,
|
|
.offset = 0x10,
|
|
.size = 0x04,
|
|
},
|
|
.leds = {
|
|
{
|
|
.green = 0x0,
|
|
.red = 0x1,
|
|
},
|
|
},
|
|
.rotary = 0x0,
|
|
.flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT,
|
|
};
|
|
|
|
static struct com20020_pci_card_info card_info_eae_ma1 = {
|
|
.name = "EAE PLX-PCI MA1",
|
|
.devcount = 2,
|
|
.chan_map_tbl = {
|
|
{
|
|
.bar = 2,
|
|
.offset = 0x00,
|
|
.size = 0x08,
|
|
}, {
|
|
.bar = 2,
|
|
.offset = 0x08,
|
|
.size = 0x08,
|
|
}
|
|
},
|
|
.misc_map = {
|
|
.bar = 2,
|
|
.offset = 0x10,
|
|
.size = 0x04,
|
|
},
|
|
.leds = {
|
|
{
|
|
.green = 0x0,
|
|
.red = 0x1,
|
|
}, {
|
|
.green = 0x2,
|
|
.red = 0x3,
|
|
},
|
|
},
|
|
.rotary = 0x0,
|
|
.flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT,
|
|
};
|
|
|
|
static struct com20020_pci_card_info card_info_eae_fb2 = {
|
|
.name = "EAE PLX-PCI FB2",
|
|
.devcount = 1,
|
|
.chan_map_tbl = {
|
|
{
|
|
.bar = 2,
|
|
.offset = 0x00,
|
|
.size = 0x08,
|
|
},
|
|
},
|
|
.misc_map = {
|
|
.bar = 2,
|
|
.offset = 0x10,
|
|
.size = 0x04,
|
|
},
|
|
.leds = {
|
|
{
|
|
.green = 0x0,
|
|
.red = 0x1,
|
|
},
|
|
},
|
|
.rotary = 0x0,
|
|
.flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT,
|
|
};
|
|
|
|
static const struct pci_device_id com20020pci_id_table[] = {
|
|
{
|
|
0x1571, 0xa001,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
0,
|
|
},
|
|
{
|
|
0x1571, 0xa002,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
0,
|
|
},
|
|
{
|
|
0x1571, 0xa003,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
0
|
|
},
|
|
{
|
|
0x1571, 0xa004,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
0,
|
|
},
|
|
{
|
|
0x1571, 0xa005,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
0
|
|
},
|
|
{
|
|
0x1571, 0xa006,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
0
|
|
},
|
|
{
|
|
0x1571, 0xa007,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
0
|
|
},
|
|
{
|
|
0x1571, 0xa008,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
0
|
|
},
|
|
{
|
|
0x1571, 0xa009,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_5mbit
|
|
},
|
|
{
|
|
0x1571, 0xa00a,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_5mbit
|
|
},
|
|
{
|
|
0x1571, 0xa00b,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_5mbit
|
|
},
|
|
{
|
|
0x1571, 0xa00c,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_5mbit
|
|
},
|
|
{
|
|
0x1571, 0xa00d,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_5mbit
|
|
},
|
|
{
|
|
0x1571, 0xa00e,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_5mbit
|
|
},
|
|
{
|
|
0x1571, 0xa201,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_10mbit
|
|
},
|
|
{
|
|
0x1571, 0xa202,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_10mbit
|
|
},
|
|
{
|
|
0x1571, 0xa203,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_10mbit
|
|
},
|
|
{
|
|
0x1571, 0xa204,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_10mbit
|
|
},
|
|
{
|
|
0x1571, 0xa205,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_10mbit
|
|
},
|
|
{
|
|
0x1571, 0xa206,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_10mbit
|
|
},
|
|
{
|
|
0x10B5, 0x9030,
|
|
0x10B5, 0x2978,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_sohard
|
|
},
|
|
{
|
|
0x10B5, 0x9050,
|
|
0x10B5, 0x2273,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_sohard
|
|
},
|
|
{
|
|
0x10B5, 0x9050,
|
|
0x10B5, 0x3263,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_eae_arc1
|
|
},
|
|
{
|
|
0x10B5, 0x9050,
|
|
0x10B5, 0x3292,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_eae_ma1
|
|
},
|
|
{
|
|
0x10B5, 0x9050,
|
|
0x10B5, 0x3294,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_eae_fb2
|
|
},
|
|
{
|
|
0x14BA, 0x6000,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_10mbit
|
|
},
|
|
{
|
|
0x10B5, 0x2200,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
0, 0,
|
|
(kernel_ulong_t)&card_info_10mbit
|
|
},
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, com20020pci_id_table);
|
|
|
|
static struct pci_driver com20020pci_driver = {
|
|
.name = "com20020",
|
|
.id_table = com20020pci_id_table,
|
|
.probe = com20020pci_probe,
|
|
.remove = com20020pci_remove,
|
|
};
|
|
|
|
static int __init com20020pci_init(void)
|
|
{
|
|
if (BUGLVL(D_NORMAL))
|
|
pr_info("%s\n", "COM20020 PCI support");
|
|
return pci_register_driver(&com20020pci_driver);
|
|
}
|
|
|
|
static void __exit com20020pci_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&com20020pci_driver);
|
|
}
|
|
|
|
module_init(com20020pci_init)
|
|
module_exit(com20020pci_cleanup)
|